5 Suggestions ForEffectively Utilizing A Shampooer To Clean Your Carpet

Page 1

5 Suggestions For Effectively Utilizing A Shampooer To Clean Your Carpet

1. Prepare your carpet and areas to be shampooed

•Go through the direction of your carpet and understand and identify the type of cleaning solution that will best suit your carpet.

•Remove all furniture from the room and then start vacuum cleaning to remove loose dust and dirt from the carpet.

•Use appropriate attachments and concentrate to clean high-traffic areas, corners, and spaces where the carpet meets the wall.

•Now take a spot test with the shampoo.

•Take your carpet cleaning shampoo and spray it on the spot directly.(Use Prochem fibre shampoo).

•Stat dabbing with a cloth and apply a vacuum cleaner now-remove all dust, and allergens as much as you can.

2. Prepare the carpet shampooing machine

•Follow the manufacturer’s guidelines and fill the clean water tank with water and Prochem fibre shampoo.

•Make sure, you are using the appropriate amount of shampoo-not more or less, as that can turn dirt more clingy towards the carpet or fabric products.

•Read all the instructions regarding the direction to use carpet shampoo carefully.

•Choose a carpet shampooer that works as an extractor with a clean water rinse cycle.

3. Now you are ready to shampoo your carpet

•Take time, plan, and then execute the cleaning job-don’t rush.

•Clean the carpet thoroughly and pass the cleaning device several times on a particular spot.

•Stop and replace the dirty water of the reservoir with clean water and repeat the process whenever required during cleaning.

•Use forward and reverse strokes on the carpet surface.

•Move in and up direction throughout the carpet surface and refill the tank with cleaning solution whenever you feel it is necessary.

•After you finish the shampooing, now run a tank of water all over the spot and rinse out the shampoo along with soiling dust.

4. After shampooing

•Put your hand on the carpet and see whether any residue moisture is left on the carpet. If you feel it so-then suction the carpet further.

•Wipe out the furniture and fittings that are placed adjacent to the carpet.

•Leave the place to dry before you place the furniture back there. For smaller rooms wait for 2 to 3 hours, and for larger spaces-leave it to dry at least for 1 day.

•Use a towel before you step down on the carpet if it is not dried up completely-better to avoid entering the room for a while.

•Vacuum the carpet once it becomes dry to remove any loose particles or pollutants.

5. Cleaning Frequency

•Set up your cleaning routines based on how much traffic a carpet receives.

•Carpets that receive foot traffic regularly need to be cleaned once or twice per year.

•A carpet that is placed in a room that receives less traffic, needs a shampooing treatment at least once in a gap of 18 months.

•The carpet having light needs frequent washing. (Use Prochem fibre shampoo)

Thank You www.clenlidirect.com

Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.