Gamer Workshop Special Oct 2015 - Feb 2016

New Products

page 2

Air Tools

page 10

Clean-Up Tools

page 18

Air Tools Accessories

page 19

Hand Tools

page 26

Engineering Equipment

page 31

LIQUIDATION SALE!

page 34

Valid 1st October, 2015 to 28 th February, 2016. All prices quoted include GST.

NEW RANGE!

NEW HVLP RANGE!

P RO F ES S I O NA L S P RAY G U N S

See full range on page 2.

HVLP Gravity & Suction Feed Spray Guns HVLP Gravity feed spray guns are now available in 1.3 mm, 1.4 mm & 1.8 mm nozzle sizes.

200 mm Coolant Proof IP54 Dual Scale Digital Caliper • Highly accurate glass scale • USB data output • Meet DIN862 Standard

HVLP Suction feed spray guns are now available in 1.8 mm & 2.0 mm nozzle sizes.

$299 EA

See full range on page 7.

Heavy Duty Air Scaling Hammer

2.6 mm Mini Quick Release Handle

NEW!

• Handle only 100 mm long • Holds all 2.6 mm Ø Deburring Blades.

See full range on page 29.

.00

• Optional Side Handle Included

3/8 Stainless Steel Burr 3 Piece Set See full range on page 16.

• New design burr optimised specially for stainless steel.

Shank Dia: 1/4”

Heavy Duty Coil Nailers Heavy Duty 0° Coil Nailer

Heavy Duty 15° Coil Nailer

Nail Shank: 2.03-2.8 MM Fastener Length: 32-65 MM Angle: Flat 0 Degrees Capacity: 200-400 nails Weight: 2.3 Kg

Nail Shank: 2.1-2.8 MM Fastener Length: 32-65 MM Angle: 15 Degrees Capacity: 200-400 nails Weight: 2.0 Kg

$599.00

NEW! $14.00

699

PN: BC2865F1

$140 .00

PN: GDMC1

®

PN: KP4733

Impact Rate: 2,400 BPM Piston Stroke: 26 mm Length: 550 mm Weight: 4.0 Kg

PN: AC-111-008-11

PN: BC2865D1

$599.00

See full range on page 11.

NEW! PN: CBSET3INOX

$129.00

See full range on page 22.

1” Super Duty Impact Wrench • Muffled Exhaust • Muli Position Handle Free Speed: 5,000 RPM Max. Torque: 1,800 Ft/Ibs Length: 275 MM Weight: 7.10 Kg ®

NEW! PN: KP1838A-P

$1,100.00

See full range on page 16.

AB•S

All ACCUD digital measuring devices utilize an Absolute Scale encoding system. This system ensures quick, accurate and reliable measurements in all working environments.

Metric Dial Calipers

USB

Quickly and accurately acquire data points via Mini USB cable.

Data can be transfered directly into Excel with no additional software required.

DATA OUTPUT

Dual Scale Economical Digital Calipers

Functions: zero point, mm/inch Measures: Inside, Outside & Depth • USB data output • Meet DIN862

USB

• Shockproof Measures: Inside, Outside & Depth

DATA OUTPUT

150 mm Metric Dial Caliper

200 mm Metric Dial Caliper

300 mm Metric Dial Caliper

150 mm Dual Scale Digital Caliper

200 mm Dual Scale Digital Caliper

300 mm Dual Scale Digital Caliper

Range: 0-150 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Int. Jaw Reach: 16.5 mm Ext. Jaw Reach: 40 mm

Range: 0-200 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Int. Jaw Reach: 19 mm Ext. Jaw Reach: 50 mm

Range: 0-300 mm Resolution: 0.01 mm Accuracy: ±0.04 mm Int. Jaw Reach: 25 mm Ext. Jaw Reach: 64 mm

Range: 0-150 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Int. Jaw Reach: 16 mm Ext. Jaw Reach: 40 mm

Range: 0-200 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Int. Jaw Reach: 19 mm Ext. Jaw Reach: 50 mm

Range: 0-300 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Int. Jaw Reach: 20.5 mm Ext. Jaw Reach: 60 mm

PN: AC-101-008-11

PN: AC-101-012-11

PN: AC-111-006-12

PN: AC-111-008-12

PN: AC-101-006-11

$102

$128

.00

$220

.00

.00

Coolant Proof IP54 Dual Scale Digital Calipers

USB DATA OUTPUT

200 mm Dual Scale Digital Caliper

300 mm Dual Scale Digital Caliper

Range: 0-150 mm/0-6” Resolution: 0.01 mm/0.0005” Accuracy: ±0.03 mm/0.001” Int. Jaw Reach: 16 mm Ext. Jaw Reach: 40 mm

Range: 0-200 mm/0-8” Resolution: 0.01 mm/0.0005” Accuracy: ±0.03 mm/0.001” Int. Jaw Reach: 19 mm Ext. Jaw Reach: 50 mm

Range: 0-300 mm/0-12” Resolution: 0.01 mm/0.0005” Accuracy: ±0.03 mm/0.001” Int. Jaw Reach: 20.5 mm Ext. Jaw Reach: 60 mm

$110

.00

PN: AC-111-008-11

$140

USB DATA OUTPUT

.00

600 mm Dual Scale Digital Caliper

1000 mm Dual Scale Digital Caliper

Range: Outside 0-620 mm/0-24.5”

Inside 20-600 mm/0-24” Resolution: 0.01 mm/0.005” Accuracy: ±0.05 mm/0.002” Jaw Reach: 100 mm

Range: Outside 0-1020 mm/0-40.2”

Inside 20-1000 mm/0-40” Resolution: 0.01 mm/0.005” Accuracy: ±0.08 mm/0.003” Jaw Reach: 150 mm

PN: AC-118-024-11

$549

.00

$30 .00

Functions: mm/in, zero point Measures: Inside, Outside • Made of hard plastic

• IP67 protection level Measures: Inside, Outside & Depth Functions: zero point, mm/inch

USB DATA OUTPUT

150 mm Dual Scale Coolant Proof Digital Caliper

200 mm Dual Scale Coolant Proof Digital Caliper

300 mm Dual Scale Coolant Proof Digital Caliper

Range: 0-150 mm/0-6” Resolution: 0.01 mm/0.0005” Accuracy: ±0.03 mm/0.001” Int. Jaw Reach: 16 mm Ext. Jaw Reach: 40 mm

Range: 0-200 mm/0-8” Resolution: 0.01 mm/0.0005” Accuracy: ±0.03 mm/0.001” Int. Jaw Reach: 19 mm Ext. Jaw Reach: 50 mm

Range: 0-300 mm/0-12” Resolution: 0.01 mm/0.0005” Accuracy: ±0.03 mm/0.001” Int. Jaw Reach: 20.5 mm Ext. Jaw Reach: 60 mm

PN: AC-112-006-12

$249

.00

PN: AC-112-008-12

$335

Caliper Depth Base Attachment

PN: AC-118-040-11

$1,125

PN: AC-117-006-11

Coolant Proof IP67 Dual Scale Digital Calipers

.00

Functions: zero point, mm/inch, ABS, data preset Measures: Inside, Outside • USB data output

$180 .00

Range: 0-150mm/0-6” Resolution: 0.01mm/0.0005” Accuracy: ±0.1mm

PN: AC-111-012-11

$215

$115

PN: AC-111-012-12

.00

150 mm Plastic Dial Caliper

Functions: zero point, mm/in, ABS Measures: Inside, Outside & Depth • Highly accurate glass scale • USB data output • Meet DIN862 Standard

150 mm Dual Scale IP54 Digital Caliper

PN: AC-111-006-11

$79

.00

.00

PN: AC-112-012-12

$479 .00

For calipers to increase the stability of depth measurement For all calipers which range are 150 mm and 200 mm (beam width is 16 mm) Made of stainless steel

PN: AC-179-000-00

$35 .00

.00

Page 2 - New Products

Metric Dial & Dual Scale Digital Indicators

Dual Scale Vernier Calipers

USB DATA OUTPUT

Functions: zero point, Invert measuring, inch/ mm direction, data preset, ABS • USB data output • Supplied with flat and lug back

Measures: Inside, Outside & Depth • Meet DIN862 Standard • Stain chrome plated reading surface • Made of stainless steel

150 mm Metric Vernier Caliper

200 mm Metric Vernier Caliper

300 mm Metric Vernier Caliper

Range: 0-150 mm Graduation: 0.05 mm/0.001” Accuracy: ±0.03/0.001” Int. Jaw Reach: 15.5 mm Ext. Jaw Reach: 40 mm

Range: 0-200 mm Graduation: 0.05 mm/0.001” Accuracy: ±0.03/0.001” Int. Jaw Reach: 19 mm Ext. Jaw Reach: 50 mm

Range: 0-300 mm Graduation: 0.05 mm/0.001” Accuracy: ±0.04/0.002” Int. Jaw Reach: 22 mm Ext. Jaw Reach: 64 mm

PN: AC-120-006-12

$56

.00

PN: AC-120-008-12

$84

PN: AC-120-012-12

$138

.00

.00

Dual Scale Digital Indicator Range: 12.7 mm/0.5” Resolution: 0.01 mm/0.0005” Accuracy: 20 μm

PN: AC-212-010-11

PN: AC-222-010-11

$245 .00

$380 .00

Metric Dial Test Indicators & Stands • 0.01 mm Graduations • Jeweled bearing • Carbide stylus • Double scale spacing • Anti-magnetic copper body • 4 mm & 8 mm Dia clamps.

PN: AC-261-008-11 600 mm Metric Vernier Caliper

1000 mm Metric Vernier Caliper

2000 mm Metric Vernier Caliper

Range: Outside 0-620 mm

Inside 20-600 mm Graduation: 0.02 mm/0.001” Accuracy: ±0.05 mm/0.002” External Jaw Reach: 100 mm Int. Jaw Reach: 18 mm

Range: Outside 0-1020 mm

Inside 20-1000 mm Graduation: 0.02 mm/0.001” Accuracy: ±0.08 mm/0.003” External Jaw Reach: 140 mm Int. Jaw Reach: 24 mm

Range: Outside 0-2020 mm

Inside 20-2000 mm Graduation: 0.02 mm/0.001” Accuracy: ±0.14 mm/0.006” External Jaw Reach: 200 mm Int. Jaw Reach: 24 mm

$315

.00

PN: AC-127-040-11

$899

Range: 0.8 mm Graduation: 0.01 mm Accuracy: ±13 μm

$110 .00

Dial Test Indicator Centering Holder Dial Test Indicator Centering Holder.

For centering of cylinders or holes.

Available in

2016

.00

Jeweled Bearing Metric Dial Indicator Range: 10 mm Accuracy: 20 μm

Measures: Inside, Outside • Meets DIN862 Standard

PN: AC-127-024-11

• Limit hands • Jeweled bearing • 1 mm range per dial revolution • Lug back

PN: AC-269-060-01

$29 .00

Dial Indicator & Micrometers Stands

600 mm Metric Vernier Long Jaw Caliper Range: Outside 0-620 mm/0-24.5”

Inside 20-600 mm/0-24” Graduation: 0.002 mm/0.001” Accuracy: ±0.08 mm/0.003” Ext. Jaw Reach: 250 mm Int. Jaw Reach: 24 mm

Measures: Inside, Outside • With fine adjustment • Stain chrome reading surface

Available in

PN: AC-281-060-01

2016

$45

.00

Magnetic Indicator Stand with Fine adjustment Ø8mm, Ø4mm, 3/8” Stem holes Magnetic Force: 60 kgf Fine adjustment.

150 mm Metric Depth Micrometer

Micrometer head accuracy: ±3μm Rod accuracy: ±(2+L/75)μm, L is the measuring range in mm Supplied with rods Ratchet stop

Range: 0-150mm Accuracy: ±31μm Base Span: 101.5 mm Base Width: 17 mm

PN: AC-281-060-02

$40 .00

Magnetic Indicator Stand Ø8mm, Ø4mm, 3/8” Stem holes Magnetic Force: 60 kgf

PN: AC-280-000-02

$119 .00

PN: AC-391-006-01

PN: AC-381-000-00

$245 .00

$39 .00

Magnetic 10 mm Dial Gauge Base Kit

100 mm Micrometer Stand

Magnetic 10 mm Dial Gauge base kit

Micrometer Stand suits micrometers that measure up to 100 mm.

Page 3 - New Products

25 mm Coolant Proof Dual Scale Digital Micrometer

Metric Outside Micrometers

Functions: mm/inch, origin, zero point, ABS, hold, data export • IP65 protection level • Carbide measuring faces • Ratchet stop.

USB DATA OUTPUT

• Carbide measuring faces • Ratchet stop

25 mm Metric Outside Micrometer

25-50 mm Metric Outside Micrometer

Range: 0-25 mm Graduation: 0.01 mm Accuracy: 4 μm Jaw Reach: 29 mm

Range: 25-50 mm Graduation: 0.01 mm Accuracy: 4 μm Jaw Reach: 39 mm

PN: AC-321-001-01

$45 .00

$50 .00

75-100 mm Metric Outside Micrometer

Range: 50-75 mm Graduation: 0.01 mm Accuracy: 5 μm Jaw Reach: 53 mm

Range: 75-100 mm Graduation: 0.01 mm Accuracy: 5 μm Jaw Reach: 65 mm

$59

.00

$215 .00

$64

75 mm Metric Micrometer 3 Piece Set

150 mm Metric Micrometer 6 Piece Set

Set consists of 3 Micrometers Range: 0-75 mm Graduation: 0.01 mm Accuracy: 5 μm

Set consists of 6 Micrometers Range: 0-150 mm Graduation: 0.01 mm Accuracy: 5 μm

PN: AC-321-003-03

$185

PN: AC-321-004-01

.00

Metric Dial Bore Gauges

.00

PN: AC-321-006-06

$380 .00

Dual Scale Vernier Height Gauges 18-160 mm Metric Dial Bore Gauge Set Set consists of 18-35 mm, 35‑60 mm & 50‑160 mm Bore Gauges & Dial Indicator Dial indicator Range: 10 mm Graduation: 0.01 mm

PN: AC-251-346-13

$579 .00

• Meets DIN862 Standard

• Move main scale to set zero with adjustable scale • Carbide tipped scriber • Satin chrome plated scale • Vernier magnifier

300 mm Metric Vernier Height Gauge Range: 0-300 mm Graduation: 0.02 mm/0.001” Accuracy: ±0.04 mm Slide Rail Width: 28 mm Length: 545 mm

50-160 mm Metric Dial Bore Gauge Range: 50-160 mm Graduation: 0.01 mm Accuracy: ±0.018 mm Length: 141 mm

PN: AC-186-012-11

$349 .00

600 mm Metric Vernier Height Gauge

PN: AC-251-160-11

$225

PN: AC-313-001-01

Metric Micrometer Sets

PN: AC-321-002-01

50-75 mm Metric Outside Micrometer PN: AC-321-003-01

Range: 0-25 mm/0-1” Resolution: 0.001 mm/0.00005” Accuracy: 2 μm Jaw Reach: 24 mm

.00

Range: 0-600 mm Graduation: 0.02 mm/0.001” Accuracy: ±0.05 mm Slide Rail Width: 35 mm Length: 870 mm

PN: AC-186-024-11

$479 .00

50-600 mm Metric Tubular Inside Micrometer

Supplied with setting standards Carbide measuring faces

Combination Square Set

Set consists of 13, 25, 50, 100, 150 & 200 mm Extension Rods.

Micrometer Head Travel: 13 mm Range: 50-600 mm Graduation: 0.01 mm Accuracy: (3+n+L/50) μm, n=number of rods, L=max. measuring length

PN: AC-817-180-02

$199 .00

PN: AC-352-024-01

$375 .00

Page 4 - New Products

Protractor: Used to set or make an angle measurement, Range: 0-180° Accuracy: ±7’ Square: Used as 90° or 45° square 90° square accuracy: ±8’, 45° square accuracy: ±10’ Rule: Used as rule, range: 300 mm/12” Center finder: Used to find the cylinder center, Accuracy: ±0.15 mm

Suprabeam warrants its products to be free from defects in materials and workmanship. Any product or part which is found to be defective under normal use will be repaired or replaced.

Miniature Torch

The Ultimate Miniature

120

80

Lumens

Lumens

3 Hour battery life 1 x AAA

280

FLOOD ENT ATTACHM

$85 6 Hour battery life 1 x AA or NiMh

$85

.00

Beam: Spot 5°

Flood 60°

Tactical Extreme Power

350 Lumens

PN: SBQ3

PN: SBQ2

.00

Beam: Spot 5°

Flood 65°

E FRE LIGHT

Lumens

PN: SBQ1MINI

$55

Compact & Powerful

10 Hour battery life 3 x AAA

PN: SBQ7C

$129.00

.00

Beam: Spot 5°

Flood 60°

8 Hour battery life 4 x AAA or NiMh

Beam: Spot 5°

Flood 70°

Body: Double Anodized Aluminium Brightness: 80 Lumens Beam: Focus by rotating Weight: 38 G Size: 98 mm x Ø15 mm

Body: Double Anodized Aluminium Brightness: 120 Lumens Beam: Hyperfocus by sliding Weight: 80 G (inc batteries) Size: 116 mm x Ø26 mm Complete with durable pouch

Light Weight Headlamp

Rechargeable & F R E E Rechargeable & Powerful Rechargeable & Powerful T FLOOD LIGH T Compact ATTACHMEN

250

400

Lumens

Lumens

PN: SBQ3R 20 Hour battery life Spot 5° Flood 60° 3 x AAA

$89.00

Body: Anodized Aluminium/Plastic Brightness: 250(Boost) 15-150 (Dimmer) Beam: Hyperfocus by sliding floodlight

spotlight to 220m range Headband: fits 50-70 cm Battery: 3 x AAA: 20h life Weight: 140 G inc battery

Head Light

$225

PN: SBV3AIR

PN: SBV3

C/W durable pouch, washable headband

mens

PN: SBQ4XR

PN: SBQ7XR

$279.00

.00

$339.00 2-9 Hour battery life Li Ion 26650 Beam: Spot 6° Rechargeable

Flood 70° (spare battery included)

Body: Double Anodized Aluminium Brightness: 400 Lumens (on Boost)

250 Lumens (on high)

50 Lumens / Low and Strobe Beam: Hyperfocus by sliding Weight: 139 G inc battery Size: 127.7 mm x Ø26.5 mm

Body: Double Anodized Aluminium Brightness: 680 Lumens (on Boost)

350 Lumens (on high)

50 Lumens / Low and Strobe Beam: Focus by sliding Weight: 132 G inc battery Size: 134 mm x Ø32 mm

Body: Double Anodized Aluminium Brightness: 900 Lumens (on Boost)

400 Lumens (on high)

170 Lumens / Low and Strobe Beam: Focus by sliding Weight: 307 G inc battery Size: 150 mm x Ø46 mm

Rechargeable

PN: SBV3R

$239.00

400

Suprabeam Accessories Bike Attachment

Flood Light Attachment

Suits for the Q3 torch

Convert your torch or head torch into a compact flood light for workshop, car or camping. Suits SBQ3, SBQ3R, SBV3 & SBV3R

Lumens

Lumens

Body: Anodized Aluminium/plastic Lumens: 320(high) 30 (reduced) Beam: Hyperfocus by sliding

floodlight - spotlight to

180 m range Headband: fits 50-70cm Battery: 3 x AAA: 20h life Weight: 160 G inc battery

9Lu 00

mens

3-6 Hour battery life Li Ion 18650 Beam: Spot 5° Rechargeable

Flood 60° (spare battery included)

$119.00 Head Light

Flood 60° 4 x AAA

6Lu 80

Body: Double Anodized Aluminium Brightness: 350 Lumens Beam: Hyperfocus by sliding Weight: 196 G (inc batteries) Size: 134 mm x Ø39 mm Complete with durable pouch

3-6 Hour battery life Li Ion 18650 Rechargeable Beam: Spot 5° (spare battery included)

Flood 60°

320

20 Hour battery life Spot 5°

Body: Double Anodized Aluminium Brightness: 280 Lumens Beam: Hyperfocus by sliding Weight: 99 G Size: 115 mm x Ø26 mm Complete with durable pouch

20 Hour battery life Spot 6°

Flood 60° Li-ion Rechargeable

Body: Anodized Aluminium/plastic Brightness: 400 Lumens (on boost)

200 Lumens (on high)

20 Lumens (reduced) Beam: Hyperfocus by

sliding floodlight

- spotlight to 180 m range Headband: Fits 50-70cm Battery: LI-ion: 20h life Weight: 184 G (Including battery)

PN: SBCAMPINGBULB

$22.00

PN: SBBIKEHOLDER

$22

.00

Traffic Wand

Q3 / V3 Colour Filters

PN: SBQ3W

Includes Blue, Red, Green & Yellow filters.

The Q3 Traffic Wand for those unexpected emergencies.

C/W durable pouch, washable headband Page 5 - New Products

PN: SBQ3W

$15.00

PN: SB3CF

$49.00

P RO F ES S I O NA L S P RAY G U N S

K818 Gravity Feed Spray Guns

$259 EA

Short fluid passages offer quicker cleaning and maintenance.

Gravity feed requires less air pressure to drive fluid feed, resulting in a higher quality finish across a wide fluid viscosity range.

K818 Gravity Feed 1.3 MM Spray Gun Applications: 2-Pack, Metallics, Enamel, Stain

Applications: 2-Pack, Metallics, Enamel, Stain

Working Pressure: 30-45 PSI Fluid Capacity: 600 CC Fluid Feed: Gravity Fluid Inlet: M14 × 1.0P Weight: 280 G

Nozzle: 1.3 MM S-Steel Pattern Width: 305 MM Air Cons.: 7.5 cfm Fluid Output: 210 ML

Nozzle: 1.4 MM S-Steel Pattern Width: 310 MM Air Cons.: 7.5 cfm Fluid Output: 220 ML

• Exceptional fluid atomization.

• Forged aluminum body with smooth anodised finish for corrosion resistance & easy cleaning.

• Teflon seals & packing.

• Suitable for both oil and water‑based painting.

• High grade stainless steel nozzle & needle for easy cleaning & long service life.

• Complies to CE standards.

K818 Gravity Feed 1.8 MM Spray Gun

K818 Gravity Feed 2.5 MM Spray Gun

K818 Gravity Feed 1.4 MM Spray Gun PN: K818M14

PN: K818M13

PN: K818M25

PN: K818M18 Applications: 2-Pack, Metallics, Acrylic, Enamels, Primer, Stains.

Applications: Heavy viscosity fluids, Glue, Spray Putty.

Nozzle: 1.8 MM S-Steel Pattern Width: 330 MM Air Cons.: 7.8 cfm Fluid Output: 300 ML

Nozzle: 2.5 MM S-Steel Pattern Width: 350 MM Air Cons.: 7.8 cfm Fluid Output: 380 ML

K818 Suction Feed Spray Guns Suction provides a mild agitating action to the fluid as the gun is being used.

Suction Feed Spray Guns can carry larger amounts of paint while retaining gun stability.

The configuration of the fluid pot offers access to tighter working spaces.

Achieves quality finishes with light viscosity paints or stains.

Suitable for adhesive coatings, specialised coatings or textured finishes.

Working Pressure: 30-45 PSI Fluid Capacity: 1000 CC Fluid Feed: Suction Fluid Inlet: M14 × 1.0P Weight: 514 G

K818 Suction Feed 1.3 MM Spray Gun

$259 EA

PN: K818S13

• Forged aluminum body with smooth anodised finish for easy cleaning.

• Suitable for low viscosity oil and water-based painting.

• High grade stainless steel nozzle & needle for easy cleaning & long service life.

• Complies to CE standards • Teflon seals & packing.

K818 Suction Feed 2.0 MM Spray Gun

K818 Suction Feed 2.5 MM Spray Gun PN: K818S25

PN: K818S20

Applications: 2-Pack, Metallics, Enamels, Polyurethanes.

Applications: Heavy viscosity fluids, Acrylics, Enamels, Primer, Glue, Stains.

Applications: Heavy viscosity fluids, Glue, Spray Putty.

Nozzle: 1.3 MM S-Steel Pattern Width: 305 MM Air Cons.: 7.5 cfm Fluid Output: 200 ML

Nozzle: 2.0 MM S-Steel Pattern Width: 340 MM Air Cons.: 7.8 cfm Fluid Output: 340 ML

Nozzle: 2.5 MM S-Steel Pattern Width: 350 MM Air Cons.: 7.8 cfm Fluid Output: 380 ML

K320 Mini Gravity Feed Spray Guns

$179 EA

Working Pressure: 30-45 PSI Fluid Capacity: 125 CC Fluid Feed: Gravity Fluid Inlet: M15 Weight: 280 G • Chrome & Nickel-plated aluminum body.

• High grade stainless steel nozzle & needle.

• Teflon seals & packing.

• Suitable for both oil and water-based painting.

Page 6 - New Products

K320 Gravity Feed 0.8 MM Spray Gun PN: K320M08 Nozzle: 0.8 MM S-Steel Pattern Width: 140 MM Air Cons.: 3.2 cfm Fluid Output: 80 ML

NEW!

K320 Gravity Feed 1.2 MM Spray Gun PN: K320M12 Nozzle: 1.2 MM S-Steel Pattern Width: 140 MM Air Cons.: 3.2 cfm Fluid Output: 100 ML

NEW HVLP RANGE! $299 EA

KH818 Gravity Feed HVLP Spray Guns The combination of HVLP technology and gravity feed spray guns offers many benefits.

High Volume Low Pressure (H.V.L.P.) technology achieves finer atomisation while using less air pressure (as low as 10 PSI). The benefit of this technology is a more efficient transfer of paint, while consuming less air. The configuration of gravity feed spray guns provide a constant supply of fluid pressure to the spray cap, offering the ability to work with both light and heavy viscosity fluids.

Working Pressure: 20~28 PSI Fluid Capacity: 600 CC Fluid Feed: Gravity Fluid Inlet: M16 Weight: 514 G

KH818 Gravity Feed 1.3 MM Spray Gun PN: KH818M13

• Exceptional fluid atomization.

• Forged aluminum body with smooth anodised finish for corrosion resistance & easy cleaning.

• Teflon seals & packing.

• Includes mini air regulator

KH818 Gravity Feed 1.4 MM Spray Gun PN: KH818M14

• Suitable for both oil and water‑based painting.

• High grade stainless steel nozzle & needle for easy cleaning & long service life.

• Complies to CE standards.

KH818 Gravity Feed 1.8 MM Spray Gun PN: KH818M18

Applications: 2 Pack, stains, enamels, polyurethanes

Applications: 2 Pack, stains, enamels, polyurethanes

Applications: Acrylics, enamels, Metallics, Lacquers

Nozzle: 1.3 MM S-Steel Pattern Width: 300 MM Air Cons.: 9.6 cfm Fluid Output: 140 ML

Nozzle: 1.4 MM S-Steel Pattern Width: 310 MM Air Cons.: 9.6 cfm Fluid Output: 150 ML

Nozzle: 1.8 MM S-Steel Pattern Width: 320 MM Air Cons.: 9.9 cfm Fluid Output: 200 ML

KH818 Suction Feed HVLP Spray Guns The main advantage of Suction Feed Spray Guns is that they can carry larger amounts of paint while retaining gun stability. Suction Feed Spray Guns are suitable for adhesive coatings, specialised coatings or textured finishes. High Volume Low Pressure (H.V.L.P.) technology achieves finer atomisation while using less air pressure (as low as 10 PSI). The configuration of suction feed pots provide a mild agitating action to the fluid as the gun is being used.

Working Pressure: 20-28 PSI Fluid Capacity: 1000 CC Fluid Feed: Suction Fluid Inlet: 3/8” Weight: 514 G

NEW HVLP RANGE! $299 EA

• Forged aluminum body with smooth anodised finish for easy cleaning.

• Includes mini air regulator • Suitable for low viscosity oil and water-based painting.

• High grade stainless steel nozzle & needle for easy cleaning & long service life.

• Complies to CE standards • Teflon seals & packing.

KH818 Suction Feed KH818 Suction Feed 1.8 MM Spray Gun 2.0 MM Spray Gun PN: KH818S18

PN: KH818S20

Applications: Acrylics, enamels, polyurethanes, Metallics, Lacquers.

Applications: Acrylics, Glue, enamels, polyurethanes, Metallics, Lacquers, Primer.

Nozzle: 1.8 MM S-Steel Pattern Width: 310 MM Air Cons.: 7.8 cfm Fluid Output: 180 ML

Nozzle: 2.0 MM S-Steel Pattern Width: 320 MM Air Cons.: 7.8 cfm Fluid Output: 210 ML

SG420 Gravity Feed Air Brush

PN: SG420A

$110.00

SG420A air brush is suitable for fine touch‑up and custom detailing applications. All metal parts with high quality stainless steel nozzle and needle for easy cleaning.

Achieve high levels of control with this fully adjustable gravity feed air brush.

SG420A Gravity Feed Air Brush Nozzle: 0.3 MM Working Pressure: 14-50 PSI Air inlet: 1/8” Fluid Output: 7 CC Fluid Capacity: 7 CC Fluid Feed: Gravity Weight: 280 G

Page 7 - New Products

Applications: Acrylics, Enamels, Stains.

• Side mount adjustable fluid pot.

• Chrome-plated metal body for easy cleaning.

• Suitable for both oil and waterbased painting.

NEW PRODUCTS P RO F ES S I O NA L S P RAY G U N S

Pressure Feed Spray Gun Systems Spray large quantities of fluid without the need to refill a smaller gun‑mounted pot. Another benefit of pressure feed systems is a lighter and easier to handle spray gun. Pressure Feed Spray Gun Systems includes fluid tank, hose and Prowin K818 Spray Gun with your choice of 1.2, 1.5, 1.8, 2.0 or 2.5 MM nozzle. See spray gun specications at the bottom of the page.

2 Litre Pressure Feed Spray Gun System Features: • Tank Pressure Regulator • Air release valve • Safety release valve • Tank handle/hanger • Complies to CE standards

10 Litre Pressure Feed Spray Gun System Features: • 3 meter hose • Tank Pressure Regulator • Air release valve • Safety release valve • Tank handle/hanger • Complies to CE standards

2 Litre Pressure Feed Tank Hose: 8 MM ID x 3 M (PU+Nylon) Tank dimensions: 130L MM x 130W MM x 445H MM Capacity: 2 Litre Tank: Aluminium Max. pressure: 60 PSI Weight total: 2.15 Kg

10 Litre Pressure Feed Tank Hose: 8 MM ID x 3 M (PU+Nylon) Tank dimensions: 315L MM x 315W MM x 485H MM Capacity: 10 Litre Tank: Aluminium Max. pressure: 60 PSI Weight total: 10.1 Kg

$695 EA 1.3 mm Nozzle 1.5 mm Nozzle 1.8 mm Nozzle 2.0 mm Nozzle 2.5 mm Nozzle

$499 EA 1.3 mm Nozzle 1.5 mm Nozzle 1.8 mm Nozzle 2.0 mm Nozzle 2.5 mm Nozzle

PN: PW10LTRK12 PN: PW10LTRK15 PN: PW10LTRK18 PN: PW10LTRK20 PN: PW10LTRK25

PN: PW2LTRK12 PN: PW2LTRK15 PN: PW2LTRK18 PN: PW2LTRK20 PN: PW2LTRK25

20 Litre Pressure Feed Spray Tank System The design of a pressure feed spray system offers a lighter and easier to handle spray gun and the ability to spray large quantity of fluid without the need to refill a smaller gun‑mounted pot. The 20 Litre Pressure Feed Spray Tank System includes a Prowin K818 1.8 MM Spray Gun, 20 litre fluid tank with manual agitation and 10 Meter supply hose.

Features: • 10 meter hose • Stainless Steel Liner • Tank Pressure Regulator • Air release valve • Safety release valve • Manual Agitation • Complies to CE standards

K818 Pressure Feed 20 Litre Pressure Feed Tank Hose: 8 MM ID x 10 M (PU+Nylon) Tank dimensions: 400L MM x 400W MM x 780H MM Capacity: 20 Litre Tank: Aluminium Max. pressure: 60 PSI Weight total: 26 Kg

$1395 EA 1.3 mm Nozzle 1.5 mm Nozzle 1.8 mm Nozzle 2.0 mm Nozzle 2.5 mm Nozzle

PN: PW20LTRK12 PN: PW20LTRK15 PN: PW20LTRK18 PN: PW20LTRK20 PN: PW20LTRK25

Pressure Feed Spray Guns K818 Pressure Feed 1.5 MM Spray Gun

K818 Pressure Feed 1.2 MM Spray Gun Nozzle: 1.2 MM S-Steel Working Pressure: 30-45 Pattern Width: 300 MM Air Cons.: 7.5 CFM Fluid Output: 170 ML Fluid Inlet: 3/8”

PSI

Nozzle: 1.5 MM S-Steel Working Pressure: 30-45 Pattern Width: 315 MM Air Cons.: 7.5 CFM Fluid Output: 240 ML Fluid Inlet: 3/8”

K818 Pressure Feed 1.8 MM Spray Gun PSI

Nozzle: 1.8 MM S-Steel Working Pressure: 30-45 Pattern Width: 330 MM Air Cons.: 7.8 CFM Fluid Output: 300 ML Fluid Inlet: 3/8”

Page 8 - New Products

K818 Pressure Feed 2.0 MM Spray Gun PSI

Nozzle: 2.0 MM S-Steel Working Pressure: 30-45 Pattern Width: 340 MM Air Cons.: 7.8 CFM Fluid Output: 340 ML Fluid Inlet: 3/8”

K818 Pressure Feed 2.5 MM Spray Gun PSI

Nozzle: 2.5 MM S-Steel Working Pressure: 30-45 Pattern Width: 350 MM Air Cons.: 7.8 CFM Fluid Output: 380 ML Fluid Inlet: 3/8”

PSI

NEW PRODUCTS 50 mm Quick-Lock Sanding Discs

Pack of 5.

$9.00 EA

2” Quick-Lock Preparation Kit

3” Quick-Lock Preparation Kit

7 Piece kit includes 1 of each: 1/4” shank, 2” backing pad, 24 Grit 2” disc, 36 Grit 2” disc, 50 Grit 2” disc, Brown (Coarse) surface prep 2” disc & Maroon (Medium) surface prep 2” disc.

7 Piece kit includes 1 of each: 1/4” shank, 3” backing pad, 24 Grit 3” disc, 36 Grit 3” disc, 50 Grit 3” disc, Brown (Coarse) surface prep 3” disc & Maroon (Medium) surface prep 3” disc.

36 Grit Sanding Discs 80 Grit Sanding Discs 50 mm Quick-Lock (Pack of 5) 50 mm Quick-Lock (Pack of 5) PN: AB22012S80 PN: AB22012S36 60 Grit Sanding Discs 120 Grit Sanding Discs 50 mm Quick-Lock (Pack of 5) 50 mm Quick-Lock (Pack of 5) PN: AB22012S60 PN: AB22012S120

75 mm Quick-Lock Pack of 5. $14.00 EA Sanding Discs

36 Grit Sanding Discs 80 Grit Sanding Discs 75 mm Quick-Lock (Pack of 5) 75 mm Quick-Lock (Pack of 5) PN: AB22013S80 PN: AB22013S36

50 mm Quick-Lock Pack of 5. $22.00 EA Mini Flap Discs

40 Grit Mini Flap Discs 80 Grit Mini Flap Discs 50 mm Quick-Lock (Pack of 5) 50 mm Quick-Lock (Pack of 5) PN: AB22012F40 PN: AB22012F80 60 Grit Mini Flap Discs 120 Grit Mini Flap Discs 50 mm Quick-Lock (Pack of 5) 50 mm Quick-Lock (Pack of 5) PN: AB22012F120 PN: AB22012F60

PN: GPK2

$29

PN: GPK3

$39.00

.00

50 mm Velcro Backing Pad

75 mm Velcro Backing Pad

Attaches velcro pads to tool.

Backing Pad: 50 mm Shank Dia.: 1/4”

Attaches velcro pads to tool.

Backing Pad: 75 mm Shank Dia.: 1/4” PN: GPA75

PN: GPA50

$28.00

$36.00

Pocket Blow Gun

4”″Rubber Tipped Blow Gun

• Rubber Tip • Roll Throttle Length: 115 mm Inlet: Japanese Compatible Fitting Material: Aluminium/POM

75 mm Quick-Lock $33.00 EA Mini Flap Discs

Pack of 5.

• Integrated metal inlet thread • Rubber Tip PN: PBGN

$13.00

PN: GP1562

$15.00

Length: 110 mm Inlet: Japanese Compatible Fitting Material: POM/Steel

Extendible Blow Gun • Adjustable nozzle length.

40 Grit Mini Flap Discs 80 Grit Mini Flap Discs 75 mm Quick-Lock (Pack of 5) 75 mm Quick-Lock (Pack of 5) PN: AB22013F40 PN: AB22013F80 60 Grit Mini Flap Discs 120 Grit Mini Flap Discs 75 mm Quick-Lock (Pack of 5) 75 mm Quick-Lock (Pack of 5) PN: AB22013F120 PN: AB22013F60

• 360° adjustable nozzle angle.

• Locking ring.

• Integrated metal inlet thread Length: 270 to 390 mm Inlet: Japanese Compatible Fitting Material: POM/Steel

Page 9 - New Products

PN: GP1562E

$24.00

TRADE QUALITY Pneumatic Tools & Fasteners

RATCHET WRENCHES

IMPACT WRENCHES 1/2” Twin Hammer Impact Wrench Max Torque: 685 Ft/lb Weight: 1.94 Kg For Heavy automotive and truck work, such as tyre changing, shock, spring work and front end work where extra powerful tools are needed.

HUGE

1/2” Ratchet Wrench

Max Torque: 30 Ft/lbs Length: 182 MM Weight: 0.63 Kg

Max Torque: 70 Ft/lbs Length: 306 MM Weight:1.3 Kg

POWER!

$169

$299.00

.00

PN: BIP114A1

$199

PN: BIT242

$239

.00

PN: BIT3110

$259.00

3/8” Impact Wrench

1/2” Impact Wrench

Max Torque: 70 Ft/lbs Free speed: 160 RPM Length: 306 MM Weight: 1.3 Kg

Free Speed: 10,000 RPM Max Torque: 190 Ft/lbs Weight: 1.23 Kg Length: 158 MM

Free Speed: 7,500 RPM Max Torque: 500 Ft/lbs Weight: 2.57 Kg Length: 197 MM

CUTTING, GRINDING & HAMMING TOOLS 1/4” Medium Die Grinder

1/4” 115° Angle Die Grinder

Collet Size: 1/4" Free Speed: 20,000 RPM Weight: 0.55 Kg

Collet Size: 1/4" Free Speed: 20,000 RPM Length: 178 MM Weight: 0.75 Kg

$159

$189.00

.00

PN: BIT242-2

.00

3/8” Butterfly Impact

PN: BG210R

PN: BRP207B1

PN: BRP003B1

PN: BIT260M1

PN: BIK107A1

$169

1/4” Mini Ratchet Wrench

$599.00

1/2’’ Impact Wrench with 2’’ Extended Anvil

3/4” Twin Hammer Impact Wrench

Max Torque: 490 Ft/lbs Free Speed: 7,500 RPM Weight: 2.87 Kg Length: 236 MM

Max Torque: 1,100 Ft/lbs Free Speed: 5,500 RPM Weight: 5.72 Kg Length: 227 MM

3” Cut Off Tool

PN: BG230RA1

$189.00

.00

1/4” 5” Extended Die Grinder

1/4” Angle Die Grinder

Collet Size: 1/4" Free Speed: 21,000 RPM Length: 280 MM Weight: 0.80 Kg

Collet Size: 1/4" Free Speed: 18,000 RPM Length: 178 MM Weight: 0.80 Kg

$189.00

$189

$139.00

3” Cut Off Discs pkt 5 Discs only 0.8 mm thick. Ø75 x 0.8 x Ø9.53 mm Speed Rated to 25,000 RPM

PN: CO007K

$16.00

2” Angle Grinder

PN: BG220RA1 PN: BG215RA1

PN: BCTA1

Free Speed: 21,000 RPM Length: 195 MM Weight: 0.8 Kg

.00

Air Hammer Kit

Spring Retainer

Air Hammer Kit includes: 5 chisels and quick change spring retainer Impact Rate: 2,900 BPM

Suits most Air Hammers Packet of 2.

PN: GPA70X2

$12

.00

PN: BHA67A1

$229.00 12 MONTH FACTORY WARRANTY ON ALL BASSO TOOLS.

Free Speed: 15,000 RPM Length: 188 MM Weight: 0.8 Kg

$189.00

50 Mm (2”) Angle Grinder Disc Suits BG222RA1 Rated Speed: 23,000 RPM Size: 50 x 4 x 9.53 mm

Page 10 - Air Tools

PN: BG222RA1

PN: 3510232

$8.50

TRADE QUALITY Pneumatic Tools & Fasteners

NAIL & STAPLER GUNS

50 MM C1 Bradder

Nail Shank: 1.00 MM x 1.25 MM Nail Length: 16-50 MM Capacity: 100 Nails Weight: 1.50 Kg

34° DA Nailer Nail Shank: 1.8 MM Fastener Length: 25-64 MM Angle: 34° Capacity: 100 Nails Weight: 1.90 Kg

Light Duty Stapler 6000/L Series Stapler

Medium Duty 80 Series Stapler

PN: B1850A1

$249

.00

Staple Crown: 12.8 MM (80 Series) Staple Length: 6-16 MM Capacity: 100 Staples Weight: 0.90 Kg

PN: BA3464A1

$389

.00

PN: BS9025PA2

$169

.00

Staple Crown: 5.8 MM (6000/L Series) Staple Length: 13 MM - 40 MM Capacity: 160 Staples Weight: 1.70 Kg

32 MM C1 Bradder

Heavy Duty

PN: B9040A1

$359

Nail Shank: 2.2 MM Fastener Length: 18-64 MM Capacity: 80 Nails Weight: 2.80 Kg

Nail Shank: 1.00 x 1.25 MM Nail Length: 10-32 MM Capacity: 100 Nails Weight: 0.60 Kg

Staple Crown: 5.8 MM (6000/L Series) Length: 13-25 MM Capacity: 100 Staples Weight: 0.60 Kg

Heavy Duty Stapler

2.2 MM T-Nailer

.00 C-Brad Stapler Nail Shank: 1.4 MM x 1.6 MM Fastener Length: 1950 MM Capacity: 100 Weight: 2.00 Kg

PN: BN8016E

$169

.00

Staple Crown: 4.5 MM (97 Series) Staple Length: 10-25 MM Capacity: 142 Staples Weight: 1.2 Kg

PN: BT2264A1

$399

.00

PN: B1832PA2

$159

Standard 97 Series Stapler

.00

PN: B1650B1

2.5 MM T-Nailer Nail Shank: 2.5 MM Fastener Length: 18-64 MM Capacity: 80 Nails Weight: 2.80 Kg

Medium Duty 6000/L Series Stapler Staple Crown: 5.8 MM (6000/L Series) Staple Length: 13-40 MM Capacity: 100 Staples Weight: 1.18 Kg

$339.00

Medium Duty C-Brad Nailer Nail Shank: 1.4-1.6 MM Fastener Length: 19-50 MM Capacity: 100 Nails Weight : 1.50 Kg

SANDERS 6” Random Orbital Sander

Disc Size: 6"Orbit Diameter: 5 MM Free Speed: 12,000 RPM Spindle Size: 5/16 x 24 UNF Weight: 0.99 Kg

PN: BOS156A1

$229.00 8” Geared Central Vac Sander (non self generating)

$185.00

PN: BT2564A1

$399.00

PN: BS9040LA1

$259.00

PN: B1650LA1

$259.00

NAIL GUN OIL

6” Random Orbital Self Generating Dust Free Sander

Disc Size: 6" Orbit Diameter: 5 MM Free Speed: 12,000 RPM Spindle Size: 5/16 x 24 UNF Weight: 0.99 Kg

PN: BS9725B1

Basso Nail Gun Oil 250 ML

PN: BO250

Basso Nail Gun Oil 1 Liter

PN: BO1000

$9.50 $17

PN: BOS156SA1

$249.00

8” Geared Sander Free Speed: 900 RPM Orbit: 4.76 MM (3/16”) Pad Size: 8” Velcro 5 hole bolt on Height: 142 MM Weight: 2.00 Kg

Free Speed: 900 RPM Orbit: 4.76 MM (3/16”) Pad Size: 8” Velcro 5 hole bolt on Height: 142 MM Weight: 2.05 Kg

PN: BOS258GR-D1 PN: BOS258GRC-D1

$439

.00

Page 11 - Air Tools

$429.00

12 MONTH FACTORY WARRANTY ON ALL BASSO TOOLS.

AIR TOOLS

SURFACE PREP TOOL & ACCESSORIES

Air Hammer Kit

5” Disc Sander

Kit includes 5 Chisels, Oiler, Spring Retainer and Case.

c/w 3”, 4” & 5” Discs.

50 mm Surface Pads and Adapter Free Speed: 16,000 RPM

Shank Size: 10.2 mm (round) Stroke Length: 19.05 mm Free Speed: 3,000 BPM Weight: 1.70 Kg

$118

$98.00

Heavy Duty Quick Change

$28.00 EA

PN: GP1204R

PN: GP102KD

Spring Retainer For Air Hammers

PN: GPA2311

$45

.00

.00

50 mm Abrasive Pads

50 mm Backing Pad

75 mm Backing Pad

Attach abrasive pads to tool. Includes 1/4” shank adapter.

Attach abrasive pads to tool. Includes 1/4” shank adapter.

PN: GPA1523K

Pad Size: 6” (velcro) Orbit Diameter: 7 mm Free Speed: 9,000 RPM Weight: 2.0 Kg

Blue 50 mm Fine Abrasive Pad Packet of 10 PN: GPA1527X10 Maroon 50 mm Medium Abrasive Pad Packet of 10 PN: GPA1528X10

PN: GPA1524K

$15.00

SANDERS 6” Random Orbital Sander

12 Months Factory Warranty

$19

50 mm Q/Change Felt Polishing Pad

Brown 50 mm Coarse Abrasive Pad Packet of 10 PN: GPA1526X10

.00

75 mm Q/Change Felt Polishing Pad

PN: GP1205

$129.00 PN: GPA1525

$8

Straight Line Sander

Takes 70 x 445 mm clip on paper. Suits flat automotive panel work.

Pad Size: 397 x 68 mm Free Speed: 2,500 RPM Weight: 2.5 Kg PN: GP1203

$179.00

$12

.00

Taper Spindle

Calico Polish Mop

1/4” Round Shank

Suits TS12 Taper Spindle 50 mm Diameter

PN: TS12

$39.00

$49.00 EA

PN: GPA1575

.00

PN: PMC50

75 mm Abrasive Pads Brown 75 mm Coarse Abrasive Pad Packet of 10 PN: GPA1529X10 Blue 75 mm Fine Abrasive Pad Packet of 10 PN: GPA1530X10

$28.00

8 Piece Flap Wheel Kit

SANDBLASTER Ideal for spot and rust removal 9 Oz capacity

Kit includes: 25 mm x 12 mm, 120 Grit, x 1 25 mm x 25 mm, 40 Grit, x 1 25 mm x 25 mm, 80 Grit, x 1 40 mm x 25 mm, 60 Grit, x 1 40 mm x 25 mm, 80 Grit, x 1 50 mm x 25 mm, 80 Grit, x 1 50 mm x 25 mm, 60 Grit, x 2

PN: GFWK

$49.00

PN: GPASB100

$55.00

NEEDLE SCALERS

Straight Needle Scaler

Air Needle Scaler & Flux Chipper Kit

Free Speed: 4000 BPM

PN: GP201

Air Caulking Gun

$289.00 Needle Scaler Attachment Fits most Air Hammers

PN: GPA1352A-3

$74.00

Takes 300 G Cartridges Recommended air pressure 15-40 PSI

• Combo Tool Kit includes blow mold case, 1 x Moil Point, 1 x 20 mm Flat Chisel 1 x 35 mm Bent Chisel, 1 x Needle Attachment.

Page 12 - Air Tools

PN: GP60012 PN: GP268K

$379.00

$79.00

AIR TOOLS 7” SANDERS & POLISHERS

SANDING ACCESSORIES 6”(150 mm) Velcro Pad

5/16” External Thread

12 Months Factory Warranty

6” (150 mm) Velcro Dust Free Pad

5/16” External Thread • Dust Free

7” Disc Sander PN: F6565

PN: F6505

$32

$35

.00

.00

7” Angle Polisher

Spindle: Male 5/8-11UNC Free Speed: 4,500 RPM Weight: 2.6 Kg Avg Air Cons.: 12 cfm

PN: GP1206A

$255

.00

BELT SANDERS 100% Merino sheep skin wool pile with tie cord.

10 mm Belt Sander

Spindle: Male 5/8-11UNC Free Speed: 2,500 RPM Weight: 2.6 Kg Avg Air Cons.: 12 cfm

PN: GP1206P

$255.00

20 mm Belt Sander Belt Size: 20 x 520 mm

Belt Size: 10 x 330 mm

Max. speed: 2,500 RPM Thickness: 32 mm 5" (125 mm) Merino Wool Sheep Skin Polishing Bonnet.

PN: FP40005

$26

.00

7" (180 mm) Merino Wool Sheep Skin Polishing Bonnet.

PN: FP40015

$32.00

$219

10 mm BELTS

PN: FP36155

$49.00

100 mm Nylon Pad M10 x 1.5 Int. Thread Includes Lock Nut

125 mm Nylon Pad M14 x 2 Int. Thread Includes Lock Nut

PN: FP20020

$319.00

.00

150 mm Velcro Pad M14 x 2 Int. Thread

PN: GP1265A

PN: GP1264A

20 mm BELTS

$19.00

PN: FP20210

40 Grit 10 mm x 330 mm Pack of 10 PN: SIP10MMXP40

80 Grit 10 mm x 330 mm Pack of 10 PN: SIP10MMXP80

120 Grit 10 mm x 330 mm Pack of 10 PN: SIP10MMXP120

60 Grit 10 mm x 330 mm Pack of 10 PN: SIP10MMXP60

100 Grit 10 mm x 330 mm Pack of 10 PN: SIP10MMXP100

$25.00 Pkt

40 Grit 20 mm x 520 mm Pack of 10 PN: SIP20MMXP40

80 Grit 20 mm x 520 mm Pack of 10 PN: SIP20MMXP80

60 Grit 20 mm x 520 mm Pack of 10 PN: SIP20MMXP60

100 Grit 20 mm x 520 mm Pack of 10 PN: SIP20MMXP100

120 Grit 20 mm x 520 mm Pack of 10 PN: SIP20MMXP120

$38.00 Pkt

$21.00

Air Rust & Paint Removal Tool Kit (Non-vacuum)

178 mm Nylon Pad M14 x 2 Int. Thread Includes Lock Nut

PN: FP20410

$39

.00

Versatile support handle can be set to any position within it’s 180 ° range.

5” Rubber Turbo Backing Pad 5/8 x 11” Internal Thread.

PN: GTP162258 M14 int thread PN: GTP162214

7” Rubber Turbo Backing Pad

$25

.00

$559.00

EA

5/8 x 11” Internal Thread.

PN: GTP1736 M14 int thread PN: GTP1737

PN: GP2001A

$49.00 EA

Kit includes: Spare disc hub, five 105 mm (4 inch) stripping wheels & carry case.

Page 13 - Air Tools

Grinding Wheels to suit GP2001A

$45.00 EA

Hooked Wire Disc 0.5 mm gauge PN: GPA2001A-1

Wire Disc 0.55 mm gauge PN: GPA2001A-2

H-Duty Hooked Straight Wire Wheel 0.7 mm gauge PN: GPA2001A-3

Stripping Disc PN: GPA2001A-5 Rubber Disc PN: GPA2001A-4

AIR TOOLS DRILLS 3/8” Reversible Keyed Drill

12 Months Factory Warranty

METAL CUTTING TOOLS

Quality Bi-metal Metal Blades

Air Body Saw

18 TPI of 5 Pack

PT301A18 24 TPI of 5 Pack

PT301A24 32 TPI of 5 Pack

PT301A32 Free Speed: 1,800 RPM Chuck Size: 3/8” (10 mm) Drilling Capacity: 10 mm (3/8”) Spindle Size: 3/8 x 24 UNF Weight: 1.36 Kg

$185.00

9.5 mm Stroke Length Cuts 1.6 mm mild steel

PN: GP41013

$135.00

PN: GP9301

$25.00 Pkt

Punch and Flange Tool

Air Nibbler

Punches 5 mm diameter hole

(push type)

3/8” Reversible Keyless Drill

Free Speed: 1,800 RPM Chuck Size: 3/8” (10 mm) Drilling Capacity: 10 mm (3/8”) Spindle Size: 3/8 x 24 UNF Weight: 1.36 Kg

$159.00

$135.00

PN: GP8201

$169.00

Metal Shear Pistol Grip Free Speed: 2500 SPM Cuts 1.6 mm Mild Steel

PN: GP4204

$189.00

GRINDERS

1/4” Right Angle Die Grinder

1/4” Medium Die Grinder

PN: GP2202

$69.00

3/8” Angle Reversible Drill

Free Speed: 1500 RPM Chuck Size: 3/8” (10 mm) Drilling Capacity: 10 mm (3/8”) Spindle Size: 3/8 x 24 UNF Weight: 1.02 Kg

$185.00

PN: GP9101

PN: GP4201F1

1/2” Reversible Keyed Drill

Free Speed: 800 RPM Chuck Size: 1/2” (12.7 mm) Drilling Capacity: 13 mm (1/2”) Spindle Size: 3/8 x 24 UNF Weight: 1.76 Kg

PN: GP9201

Cuts 1.2-1.6 mm mild steel

Collet Size: 1/4” Free Speed: 18,000 RPM Weight: 0.833 Kg

Collet Size: 1/4” Free Speed: 22,000 RPM Weight: 0.675 Kg

$225

.00

$138.00

1/8” Micro Die Grinder Kit

1/4” Compact Die Grinder Kit PN: GP4209

PN: GP2203R

Free Speed: 55,000 RPM c/w Stones in polymer Case

Free Speed 22,000 RPM c/w Stones in polymer Case

PN: GP2204K

$169.00

AIR ENGRAVER Air Engraving Stylus Includes medium stylus PN: GP2201K

$69.00 PN: GP110

$229.00

3” Cut Off Grinder PN: GP3201

$98.00

Fine Point Stylus to suit GP110

3”Inline Cut-off Grinder Includes one cut-off disc.

Free Speed: 18,000 RPM Length: 225 mm

PN: GP110-16 Medium Point Stylus to suit GP110 PN: GP110-17 Wide Point Stylus to suit GP110 PN: GP110-18

67.85 EA

Free Speed: 22,000 RPM Weight: 0.75 Kg

Page 14 - Air Tools

PN: GP3203

$169.00

AIR TOOLS

12 Months Factory Warranty

HYDRAULIC RIVETERS

WRENCHES

3/16” Air / Hydraulic Riveter Gun Kit

1/2” Impact Wrench Kit Max Torque: 260 Ft/lbs Includes 5‑1/4 Inch Extension, Tool Oiler, 9, 10, 11, 13, 14, 17, 19, 22, 24, 27 mm sockets.

Heavy Duty Air/Hydraulic Riveter

PN: GP1121D

$229.00

Sizes: 9/32”, 1/4”, 3/16” & 5/32” PN: GP6304

$599.00

PN: GP504K

$139.00

PN: GP260T

$279

.00

PN: GP3125

$499

.00

1/2” Impact Wrench

3/4” Impact Wrench

Max Torque: 500 Ft/lbs Nett Weight: 2.0 Kg

Max Torque: 1100 Ft/lbs Nett Weight: 3.48 Kg

TYRE INFLATORS

Compact Tyre Gauge

Dual Straight Tyre Water Chuck

• All metal Construction

• Standard 15 mm garden hose fitting • Features internal serrations to grip valve thread • Perfect for water inflation of tractor tyres

Range: 0-160 PSI. Metering: Analog Units: PSI, KPA Inlet: 1/4 Male Output: Schrader valve

NEW!

PN: GPA1570W

$28.00

PN: GPATPG

$30.00

Straight Dual Access Tyre Chuck 3/8” Ratchet Wrench Heavy Duty Max Torque: 75 Ft/lbs PN: GP5203

$138

.00

1/2” Ratchet Wrench Heavy Duty

PN: GPA1570

$23.00

Max Torque: 75 Ft/lbs PN: GP5204

$138

PN: GPATC2

$14.00

PN: GP1558-4

$199.00

Measuring range: 0-160 PSI Units: PSI, KPA Output: Schrader valve PN: GPA6200

$129.00 PN: GP8101

$149.00

GREASE GUN

VACUUM GUN KIT Wonder Gun Kit

4” Heavy Duty

c/w Bag, Hose and Extra Nozzles.

Blows and Sucks PN: GP8102

$229

.00

Air and manual grease gun Takes standard 500 CC cannisters

5” Heavy Duty Disc Size: 5” (125 mm) Spindle Size: M10 x 1.5 Free Speed: 11,000 RPM Weight: 1.82 Kg

Digital Tyre Inflater

Deluxe Tyre Inflater

4” Compact Angle Grinder

Disc Size: 4” (100 mm) Spindle Size: M10 x 1.5 Free Speed: 11,000 RPM Weight: 1.95 Kg

Tyre Chuck with Flexible Hose

.00

ANGLE GRINDERS Disc Size: 4” (100 mm) Spindle Size: M10 x 1.5 Free Speed: 11,000 RPM Weight: 1.6 Kg

• Internal serration to grip tread

PN: GP31003

$259

.00

PN: GP1081D

$115.00 Page 15 - Air Tools

PN: GPA0206KB

$69.00

AIR TOOLS

®

12 Months Factory Warranty

Impact Wrenches RUNOUT

1/2” Compact Impact Wrench

PRICE!

Free Speed: 10,000 RPM Max Torque: 200 Ft/lbs Nett Weight: 1.35 Kg

Impact Wrench Free Speed: 6,800 RPM Max Torque: 500 Ft/lbs Nett Weight: 2.80 Kg

$799

Jumbo Single Hammer Free Speed: 8,000 rpm Max Torque: 200 ft/lbs Nett Weight: 1.90 Kg Overall Length: 342 mm

PN: KP1469

$296

.00

PN: KP1475

$389.00

$1,849

.00

FREE !

SOCKET SET Valued at $

339!

Air Hydraulic Nutsert Gun

Heavy Duty Air Hydraulic Riveter

Pulls up to M12 in stainless Rivet Cap: M3, 4, 5, 6, 8, 10, 12 Pulling Power: 4800 lbs Length: 278 mm Nett Weight: 1.8 Kg PN: KP4251MK

Includes 5/16”, 1/4”, 7/32”, 3/16” anvils & tie Rods.

$1,799

.00

6” Extended ble.

Anvils Availa

PN: KP1023

$550.00

1” Sq Drive SUPER DUTY Twin Hammer - High Torque Max Torque: 1400 Ft/lbs PN: KP1835 Length: 315 mm Nett Weight: 6.0 Kg

$1,050.00

Takes standard 400, 500, 600, 800 ml (50 mm) sachets.

Recommended air pressure: 45-90 PSI Length: 550 mm Weight: 0.9 Kg

$219.00

Heavy Duty Chipping Hammer with Side Exhaust Stroke: 102 mm Blows/Min: 1500 BPM Length: 350 mm Weight: 9 Kg

Pulling Power: 1723 Kg Stroke: 22.5 mm Air Inlet: 1/4” Weight: 1.88 Kg

PN: KP4735S3H

$699.00

CHISELS $655

PN: KP4613

Air Chipping Hammer

Grease Gun

PN: KP4210VK

Manual Grease Gun Capacity: 80 CC

.00 25 mm Flat Chisel to suit KP4735SH for scraping, peeling spot welds etc.

Shank Diameter: PN: KPAC10021AH 14.5 mm AF Hex .00 Length: 260 mm

Needle Scaler

$55

HEAVY DUTY NEEDLE SCALER Blows / Min: 3,700 BPM Overall Length: 350 mm 19 Needles Ø3 x 180 mm

1” Super Duty Impact Wrench

Heavy Duty Air Caulking Gun

Purchase a 1” Heavy Duty Impact Wrench and receive a FREE set of 1” Metric or Imperial Sockets Valued at $339!

Free Speed: 3,000 RPM PN: KP1045K Max Torque: 2500 Ft/lbs Nett Weight: 15.8kg

$1,100.00

3/4” Heavy Duty Impact Wrench

1” HD Impact Wrench

See page 19 for metric and imperial socket sets.

PN: KP1838A-P

.00

Free Speed: 6,500 RPM Max Torque: 750 Ft/lbs Nett Weight: 4.55 Kg

NEW!

1” Super Duty Impact Wrench Free Speed: 5,000 RPM Max. Torque: 1,800 Ft/Ibs Weight: 7.10 Kg

PN: KP1030

1/2” Super Duty Angle Impact

Super Compact 1/2” Impact Wrench

6” Extended ble.

Anvils Availa

Free Speed: 5,500 rpm Max Torque: 1100 ft/lbs Nett Weight: 5.6 Kg

$299.00

.00

Length: 120 mm Free Speed: 10,000 rpm Max Torque: 450 ft/lbs Nett Weight: 1.55 Kg

3/4” Heavy Duty Impact Wrench

PN: KP1018

PN: KP1012J

$199

1/2” Impact Wrench

PN: KP4722P

$325

.00

25 mm Moil Point Chisel to suit KP4735SH for breaking up concrete.

Shank Diameter: PN: KPAC10022AH 14.5 mm AF Hex .00 Length: 260 mm

$55

Page 16 - Air Tools

PN: KPAC050

$29.00

AIR TOOLS

®

1/4” Through Ratchet Kit

12 Months Factory Warranty

Disc Sanders Dual Action Mini Sander

PN: KP2219

$259.00 Complete with 10 Sockets, 3/8” square adapter & blow mound case.

Max Torque: 30 ft/lb Nett Weight: 0.6 Kg

Sizes: Metric 8, 10, 12, 13, and 14 mm Imperial 5/16, 3/8, 7/16, 9/16 & 1/2”

Two Speed Drill

Two Speed Air Sander

c/w 50 mm & 75 mm Backing Pad Free Speed: 15,000 rpm Weight: 0.45 Kg

3” Pistol Grip Mini Sander 2 Speed c/w Velcro Pad Weight: 0.50 Kg PN: KP6628

$148.00

Grinders 1/4” Mini Die Grinder

Free Speed: 30,000 RPM Nett Weight: 0.52 Kg

3/8” Super Duty Two Speed Drill

PN: KP6712

$189.00 2 1/2” Super Duty Grinder

PN: KP6226

$169.00

Free Speed: 2,800 rpm Nett Weight: 0.84 Kg

Free Speed: 14,000 RPM Nett Weight: 1.40 Kg

PN: KP6970SL

PN: KP5302

$169

$392.00

.00

Ideal for easy centre punching steel, counter sinking nails or for removing drift pins, roll pins and more. This professional range of spring tools generate 3500 lbs of striking impact and are about the size of a ballpoint pen.

SPRING 5 PIECE AUTOMOTIVE SET 2 PIECE PAINT PRO SET 5 Assorted Punches and Chisel for automotive applications Includes: HSS Centre Punch, Prick and Centre Punch, Self Centering Centre Punch, Cold Chisel Ping Dent Hammer & Carry Case

2 Piece Paint Pro Set painters kit for precise countersinking of nails. Also includes door pin removal tool (also knocks door pins back in).

MADE IN THE U.S.A. MADE IN THE

Rubber Grips to suit spring tools (Spring Tool not included)

PN: ST50X08

$89.00

PN: STGRIPS

$2.00 EA

PN: STPM407

$29.00 Includes: • Hammerless Combination 1/32” and 2/32” Nail Set • Hammerless door pin removal tool

Double Ended Punches

Single Ended Punches SPRING 4 PIECE MEDIUM PUNCH SET 4 Medium Pin Punches for removing drift pins, roll pins, clevis pins, spring pins, dowel pins and more.

Includes carry case.

$24

Punch Sizes: Tip Dia.: 1/16”, 3/32”, 1/8” & 5/32” Tip Length: 1 3/8” PN: STPPM503

$78.00

Prick punch .00

EA

High Speed Steel Centre Punch PN: ST28R45-1

Designed to mark Ultra Hard materials. The tip can be sharpened without losing its RC65 Hardness.

5/16” Self Centering Centre Punch PN: ST38R04-1

Creates perfectly centered holes in brackets, hinges and other beveled surfaces.

Page 17 - Air Tools

$24.00 EA

PN: ST32R00-1

For slight accurate spot mark for layout and measuring.

Centre Punch for deep indentation in most materials.

1/32” & 2/32 Combo Punch

PN: ST32R12-1 For countersinking or setting finish nails.

2/32” Nail Starter and Nail Set Combo.

PN: ST32R42-1

Designed to start & guide nails or wire brads into any surface.

Ideal for tight spaces where a hammer wouldn’t fit

CLEAN UP TOOLS MAGNETIC BROOM

Magnetic Round Tray

Magnetic Broom. Great for picking up small metal objects from the workshop floor. The broom also has a quick slide release on the telescopic handle.

Air Engine Cleaner (Kero Gun) PN: GPA034

$69.00

150 mm Diameter Rubber Backed to prevent scratching. A great way to keep small parts together while working.

Lifts up to 9 Kg (20 lbs) Width: 377 mm

$119.00

Suction Type c/w Hose

Magnetic Clean up Wand Lifting Capacity: 6.30 Kg Length 400 mm Weight 0.470 Kg

PICK UP WAND PN: GPA1565

$39.00

$16.00

CLEAN UP WAND

PN: MB001

Engine Cleaner

PN: MRT001

Telescopic Magnetic Pick Up Wand Length: 168 mm to 900 mm Capacity: 4.50 Kg

PN: MW001

$75.00

PN: MTP001

$14.00

A one of a kind brush system Unlike other sweeping brush devices, Haaga sweepers rely on there patented disk brush technology. These two specially made circular brushes cut under the waste material and whisk it directly into the waste container. The coarse or fine debris is not run over or pushed around in front of the sweeper.

Ideal cleaning solution for workshops, warehouses, factories and parking areas.

Effortlessly sweep up fine and coarse dirt, from sand to cans, wet leaves, be it dry or wet.

The disc brushes, which protrude on both sides ensure even greater sweeping performance Easy operation & long service, life thanks to it’s belt-less drive system.

Additional guide rollers for easy sweeping along curbs and walls.

The infinitely variable height adjustment ensures optimal performance on various types of surfaces.

Space-saving storage, store vertically without losing any of the collected material.

HAAGA 200 Series Sweepers One of a kind brush system Unlike other sweeping brush devices the Haaga 225 sweeper relies on it’s patented disk brush technology. These two specially made circular brushes cut under the waste material and whisk it directly into the waste container. Coarse or fine debris are not run over or pushed around in front of the sweeper.

1 YEAR COMMERCIAL

WARRANTY

200 Series Commercial Sweeper Cleaning Width: 550 mm Performance: 1600 m2/h Capacity: 25 Liters Weight: 6 Kg (empty) PN: HG255

$449.00 400 Series Commercial Sweeper Cleaning Width: 770 mm Performance: 2,900 m2/h Capacity: 50 Liters Weight: 13 Kg (empty) PN: HG477

$899.00

HAAGA 400 Series Sweepers

Features an automatic height adjustment

Twice the sweeping capability in one pass

400 Series Commercial Sweeper Cleaning Width: 970 mm Performance: 3,600 m2/h Capacity: 50 Liters Weight: 15 Kg (empty)

The Haaga 477 & 497 models have an additional fine particle roller brush that is mounted behind the circular brushes.

Very low dust through intelligent air flow Both machines are also equipped with two special fine particle filters. The dusty air is cleaned by these filters and returned to the sweeping circuit.

PN: HG497

$1090.00 Page 18 - Clean Up Tools

2 YEAR DOMESTIC WARRANTY

AIR ACCESSORIES SOCKET SETS

Made from Chrome Molybdenum Steel CR-MO.

3/8” DRIVE

Meet or exceed DIN & ANSI standards.

1/2” DRIVE

3/8” 8 Piece Metric Socket Set Sizes: 8, 10, 11, 12, 13, 15, 17, 19 mm 3/8” 8 Piece Imperial Socket Set Sizes: 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”

PN: GX838SSM

$59

.00

PN: GX838SSI

$59

.00

1/2” 13 Piece Metric Socket Set Sizes: 10, 12, 13, 14, 15, 17, 18, 19, 21, 22, 24, 27 and 30 mm 1/2” 13 Piece Imperial Socket Set Sizes 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8,15/16, 1, 1-1/16, 1-1/8, 1-1/4”

3/4” DRIVE

PN: GX1312SSM

$129

.00

PN: GX1312SSI

$129

.00

3/4” 8 Piece Imperial Socket Set Sizes 1, 1-1/16, 1-1/8, 1-1/4, 1-5/16, 1-3/8, 1-7/16 and 1-1/2”

PN: GX834SSM

$159.00 PN: GX834SSI

$159.00

SPIN EXTENSIONS

1/2” DRIVE HEX BIT SET

1” DRIVE

3/4” 8 Piece Metric Socket Set Sizes: 26, 27, 29, 30, 32, 35, 36 and 38 mm

The ergonomic roller-bearing grab handle protects your hand from friction burns, burs and”glove grab”.

It’s use also helps to balance heavy impact tools. The aluminum alloy handle is permanently mounted on the CrMo extension.

Made from SNCM 8660 Steel which allows 20% more torque than CR-MO. 1” 9 Piece Metric Socket Set Sizes 24, 27 ,30, 32, 33, 36, 38, 41 and 46 mm 1” 9 Piece Imperial Socket Set Sizes 1, 1-1/8, 1-1/4, 1-3/8, 1-1/2, 1-5/8, 1-3/4, 1-7/8 and 2”

PN: GX91SSM

1/2” 8 Piece Imperial Hex Bit PN: GX12HBSM Socket Length 60 mm .00 Sizes: H5, H6, H8, H10, H12, H14, H17, H19 mm

PN: GX91SSI

1/2” 8 Piece Imperial Hex Bit Socket Length 78 mm Sizes: 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 3/4”

$339.00 $339

.00

$69

IMPACT UNIV. JOINTS

PN: GX12HBSI

$69.00

PN: GX38U

1/2” Drive Universal Joint Overall Length 63 mm

PN: GX12U

1/4” Wobble Extension Bar Set 4 Piece

3/4” Drive Universal Joint Overall Length 90 mm

PN: GX34U

$19.00 $22.00

Includes: 3”, 6”, 10” & 12” bars

$23.00 5 Piece Std Adapter Set Chrome Vanadium

5 Piece IMPACT Adapter Set Chrome Molybdenum

1/4” Female to 3/8” Male 1/2” Female to 3/8” Male 3/8” Female to 1/4” Male 1/2” Female to 3/4” Male 3/8” Female to 1/2” Male

1/4” Female to 3/8” Male 1/2” Female to 3/8” Male 3/8” Female to 1/4” Male 1/2” Female to 3/4” Male 3/8” Female to 1/2” Male

PN: GXWEBS14

PN: GXWEBS38

$49.00

PN: GXIA5

$35.00

Made from Chrome Molybdenum Steel CR-MO.

3/8” Wobble Extension Bar Set 4 Piece

Includes: 3”, 6”, 10” & 18” bars

PN: GX5AS

$69.00

$43.00

$39.00

5 PIECE ADAPTER SETS

$39.00 PN: GX34SE

3/4” Spin Extension Length 10”

WOBBLE IMPACTING BAR SETS

3/8” Drive Universal Joint Overall Length 50 mm

Molybdenum Steel CR-MO.

PN: GX12SE 1/2” Spin Extension Length 8”

1/2” Wobble Extension Bar Set 4 Piece

Includes: 3”, 5”, 10” & 18” bars PN: GXWEBS12

$59.00 Page 19 - Clean Up Tools

AIR ACCESSORIES INLINE WATER SEPARATOR 1/4” Inline Water Separator is an ideal solution for maintaining quality control when painting 2-Pack or oil based paints.

3/8” Air Hose Reel

Manual Hose Reel

• Brass swivel points • Polyurethane braided hose • Sheet metal housing • Wall Mountable Hose Size: 12 Metre x 11 mm ID

• High quality Polyurethane braided hose • Space Saving Foldable Handle • 360 degree swivel base Includes wall hanging bracket.

Hose Size: 20 Metre x 11 mm ID

PN: GPA1512

$24.00

IN-LINE REGULATORS 1/4” Male to 1/4” Female

1/4” Internal Thread

PN: GPHR1012

$269.00 1/4” NPT Male to 1/4” NPT Female

$269.00

Japanese PN: GPA1012 Compatible .00 Coupling

PN: GPA1010

$14

PN: GPHR1220

$14

.00

1/4” External Thread.

Swivel Connector

FILTER REGULATORS FILTER REGULATOR & LUBRICATOR

Japanese Compatible Coupling

1/4” NPT Male to 1/4” NPT Female

PN: GPA1011

$14.00

PN: GPA9100A

$22.00

ROTARY COUPLINGS Range: 22 ° PN: B05

3/8” Male Rotary Coupling PN: B07

$14

.00

PART NUMBER

PRICE

1/4” mini control unit

THBC202

$59.00

1/4” control unit

THBFLR802

$85.00

3/8” control unit

THBFLR803

$85.00

1/2” control unit

THBFLR804

$85.00

FILTER REGULATOR

1/4” Male Rotary Coupling

Range: 22 °

DESCRIPTION

DESCRIPTION

PART NUMBER

PRICE

1/4” mini filter reg

THBFR212

$59.00

1/4” filter regulator

THBFR802

$55.00

3/8” filter regulator

THBFR803

$55.00

1/2” filter regulator

THBFR804

$55.00

EA 3/4” Filter Regulator

1/4” Regulator

Premium Compressor Oil 1 Litre

Integrated Auto Drain

c/w gauge (No Filter)

Protect your compressor and extend service life with Geiger Premium Compressor Oil.

1” Filter Regulator

PN: COMPOIL1

$19.00

PN: THBFR926A

$229

.00

Integrated Auto Drain PN: THBFR928A

$229

.00

PN: THBR202

$39.00

1/2” Filter (No Regulator or Gauge) PN: THBF804

$45.00

Spare parts are available for all Geiger filter regulators.

Page 20 - Clean Up Tools

AIR ACCESSORIES MANIFOLDS

AIR BLOW GUN & DUSTERS 3/8” High Flow Blow Gun Kit (All Metal) Japanese compatible fitting.

Kit includes: • High Flow Duster • Easily Adjustable High Flow Nozzle.

• Heavy Duty High Flow Nozzle • Standard Nozzle.

2 Way In-line Quick Coupler PN: GPA1515

PN: GHF60AS

$46

$24

.00

.00

Pocket Blow Gun Air blower gun

PN: GPA1517

2 Way Cluster Manifold Bare

3 Way Cluster Manifold Bare

$28

$32.00

.00

PN: GPAYA3

PN: GPAYA2

$11

$12.00

.00

2 Way Cluster Quick Coupler

PN: GPB90K

.00

4 Way In-line Quick Coupler

PN: GPA1516

Roll Throttle (on - off) Nitto Compatible Length: 114 mm

Features integrated 2 metre air hose.

$49

3 Way In-line Quick Coupler

PN: GPA1513

$24

.00

3 Way Cluster Quick Coupler PN: GPA1514

$28.00

PN: PBG-N

4 Way Inline Manifold Bare PN: GPATA4

$13.00 3 Way Inline Manifold Bare PN: GPATA3

$12.00 2 Way In-line Manifold Bare PN: GPATA2

$11.00

$13.00

10 mm RECOIL HOSE 2 Metre Recoil Hose PN: GPH1003LBHL

$45

.00

5 Metre Recoil Hose 6.5 mm ID/10 mm OD c/w Japanese compatible One Touch couplings.

PN: GPH1006LBHL

$49

.00

10 mm FITTED AIR HOSE

12 mm RECOIL HOSE 5 Metre Recoil Hose

6 Metre Recoil Hose

PN: GPH1206LBHL

PN: GPH1008LBHL

$55

6 Metre Recoil Hose

8 Metre Recoil Hose

$59

.00

8 mm ID/12 mm OD c/w Japanese compatible One Touch couplings.

$59

$79.00

.00

12 mm One Touch Coupling Fittings for Air Hose

Includes 2 x hose clamps

Includes 2 x hose clamps

30 Metre Fitted Air Hose

Air Hose Size: 10 mm ID c/w Japanese compatible One Touch couplings.

Air Hose Size: 10 mm ID c/w Japanese compatible One Touch couplings.

Air Hose Size: 12 mm ID c/w Japanese compatible One Touch couplings.

Air Hose Size: 12 mm ID c/w Japanese compatible One Touch couplings.

$69.00

PN: GPH1212LBHL

PN: GPH1208LBHL

10 mm One Touch Coupling Fittings for Air Hose

20 Metre Fitted Air Hose

$49.00

10 Metre Recoil Hose

AIR HOSE CONNECTION KIT

30 Metre Fitted Air Hose

PN: AH1030F

$69.00

12 mm FITTED AIR HOSE

20 Metre Fitted Air Hose

PN: AH1020F

PN: GPH1210LBHL

$55.00

.00

PN: GPH1010LBHL

8 Metre Recoil Hose

PN: AH1220F

$79

.00

PN: AH1230F

$105

.00

Page 21 - Clean Up Tools

PN: AHPACK

$22

.00

PN: AHPACK12

$27.00

Standard & Special Carbide Burrs Made in Europe.

For over 50 years Morrisflex has provided optimum solutions for aerospace, automotive, shipbuilding, metal fabrication & welding sectors worldwide. Morrisflex has been committed to providing our customers with high performance products that maximise productivity and reduce costs. Morris Flex is accredited to ISO9001: 2008 and is equipped with the latest CNC technology delivering product of unrivaled quality and consistency.

Standard 1/4” Shank Carbide Burrs Standard & Non-ferrous 1/4” Shank Carbide Burrs are available in three head diameters.

1/4” 3/8” 1/2”

Ball Shape

Size 1 Size 3 Size 5

H ea d Si z e

He ad D ia

He ad Length

Ov e r all Length

1 3 5

1/4”

3/8”

3/8” 1/2”

PN

Price

2”

CBSE1

5/8”

2 3/8”

CBSE3

7/8”

2 5/8”

CBSE5

$30.00 $39.00 $55.00

1 3 5

He ad Length

Ov e r all Length

PN

Price

$30 $29.00 $55.00

1/4”

11/16”

2”

CBSF1

3/8”

3/4”

2 1/2”

CBSF3

1/2”

1”

2 3/4”

CBSF5

.00

H ea d Si z e

Head D ia

Head Length

Ov e r all L ength

1 3 5

1/4”

11/16”

3/8” 1/2”

PN

Price

2”

CBSG1

3/4”

2 1/2”

CBSG3

1”

2 3/4”

CBSG5

$30.00 $46.00 $55.00

H ea d Si z e

He ad D ia

He ad Length

Ov e r all Length

1 3 5

1/4”

11/16”

3/8” 1/2”

PN

Price

2”

CBSA1

3/4”

2 1/2”

CBSA3

1”

2 3/4”

CBSA5

$30.00 $39.00 $55.00

Cylinder Shape with End Cut H ea d Si z e

He ad D ia

He ad Length

Ov e r all Length

1 3 5

1/4”

11/16”

3/8” 1/2”

PN

Price

2”

CBSB1

3/4”

2 1/2”

CBSB3

1”

2 3/4”

CBSB5

$30.00 $39.00 $55.00

Radius Ended Cylinder Shape

1 3 5

Head Length

1 3 5

1/4”

3/16”

3/8” 1/2”

PN

Price

2”

CBSD1

5/16”

2 1/8”

CBSD3

7/16”

2 1/4”

CBSD5

$30.00 $39.00 $55.00

Head Size

Head Di a

Head Len g th

Ov er al l Len g th

PN

Price

1 3 5

1/4”

9/16”

2 3/4”

CBSH1

3/8”

3/4”

2 1/2”

CBSH3

1/2”

1 1/4”

3”

CBSH5

$30.00 $49.00 $72.00

Head Size

Head Di a

Head Len g th

Ov er al l Len g th

1 3 5

1/4”

11/16”

3/8” 1/2”

PN

Price

2”

CBSL1

1 3/16”

3”

CBSL3

1 1/4”

3”

CBSL4

$30.00 $46.00 $55.00

Head Size

Head Di a

Head Len g th

Ov er al l Len g th

PN

Price

1 3 5

1/4”

1/2”

1 7/8”

CBSM1

3/8”

5/8”

2 1/2”

CBSM4

1/2”

7/8”

2 3/4”

CBSM5

$30.00 $55.00 $55.00

Inverted Cone Shape

Cylinder Shape

Head D ia

Ov er al l Len g th

Cone Shape

Pointed Tree Shape

H ea d Si z e

Head Len g th

Ball Nosed Cone Shape

Ball Nosed Tree Shape He ad D ia

Head Di a

Flame Shape

Oval Shape

H ea d Si z e

Head Size

Ov e r all L ength

PN

Price

$30 $39.00 $55.00

1/4”

11/16”

2”

CBSC1

3/8”

3/4”

2 1/2”

CBSC3

1/2”

1”

2 3/4”

CBSC5

.00

Page 22 - Air Tool Accessories

Head Size

Head Di a

Head Len g th

Ov er al l Len g th

1 3 5

1/4”

5/16”

3/8” 1/2”

PN

Price

2”

CBSN1

3/8”

2 1/8”

CBSN3

1/2”

2 1/4”

CBSN5

$30.00 $46.00 $55.00

60° Countersink Shape Head Size

Head Di a

Head Len g th

Ov er al l Len g th

1 3 5

1/4”

3/16”

3/8” 1/2”

PN

Price

2”

CBSJ1

5/16”

2 1/4”

CBSJ3

7/16”

2 3/8”

CBSJ5

$30.00 $39.00 $55.00

90° Countersink Shape Head Size

Head Di a

Head Len g th

Ov er al l Len g th

1 3 5

1/4”

1/8”

3/8” 1/2”

PN

Price

2”

CBSK1

3/16”

2 1/8”

CBSK3

1/4”

2 1/8”

CBSK5

$30.00 $39.00 $55.00

NEW!

Carbide Burr Sets 1/8” Head Carbide Burr 10 Piece Set

3/8” Head Carbide Burr 3 Piece Set

1/4” & 3/8” Head Burr 8 Piece Set

1/2” Head Carbide Burr 5 Piece Set

3/8” Head Non‑ferrous Burr 3 Piece Set

3/8” Head Stainless Burr 3 Piece Set

Shank Dia: 1/8”

Shank Dia: 1/4”

Shank Dia: 1/4”

Shank Dia: 1/4”

Shank Dia: 1/4”

Shank Dia: 1/4”

PN: CBSET3

PN: CBSET10

$139

PN: CBSET8

$110.00

.00

$229.00

PN: CBSET5

PN: CBSET3NF

$255.00

PN: CBSET3INOX

$135.00

$129.00

Non-ferrous 1/4” Shank Carbide Burrs NF Cylinder Shape H ea d Si z e

Head D ia

Head Length

Ov e r all L ength

1 3 5

1/4”

11/16”

3/8” 1/2”

NF Radius Ended Cylinder Shape PN

Price

2”

CBSA1NF

3/4”

2 1/2”

CBSA3NF

1”

2 3/4”

CBSA5NF

$46.00 $46.00 $72.00

NF Pointed Tree Shape H ea d Si z e

1 3 5

Head D ia

Head Length

Ov e r all L ength

PN

Price

$46 $55.00 $72.00

1/4”

11/16”

2”

CBSG1NF

3/8”

3/4”

2 1/2”

CBSG3NF

1/2”

1”

2 3/4”

CBSG5NF

.00

Head D ia

Head Length

Ov e r all L ength

PN

Price

3

3/8”

5/8”

2 1/2”

CBSM4NF

$72

.00

1 3 5

Ov er al l Len g th

1 3 5

1/4”

11/16”

3/8” 1/2”

PN

Price

2”

CBSC1NF

3/4”

2 1/2”

CBSC3NF

1”

2 3/4”

CBSC5NF

$46.00 $45.00 $72.00

Head Size

Head Di a

Head Len g th

Ov er al l Len g th

1 3 5

1/4”

11/16”

3/8” 1/2”

PN

Price

2”

CBSF1NF

3/4”

2 1/2”

CBSF3NF

1”

2 3/4”

CBSF5NF

$46.00 $55.00 $72.00

Head Size

Head Di a

Head Len g th

Ov er al l Len g th

1

1/4”

11/16”

3 5

3/8” 1/2”

PN

Price

2”

CBSL1NF

1 3/16”

2 1/2”

CBSL3NF

1 1/4”

2 1/2”

CBSL4NF

$46.00 $55.00 $72.00

NF Oval Shape

NF Ball Shape Head Length

Head Len g th

NF Ball Nosed Cone Shape

H ea d Si z e

Head D ia

Head Di a

NF Ball Nosed Tree Shape

NF Cone Shape

H ea d Si z e

Head Size

Ov e r all L ength

PN

Price

$46 $75.00 $72.00

1/4”

5/16”

2”

CBSD1NF

3/8”

5/16”

2 1/8”

CBSD3NF

1/2”

7/16”

2 1/4”

CBSD5NF

.00

Head Size

Head Di a

Head Len g th

Ov er al l Len g th

1 3 5

1/4”

3/8”

3/8” 1/2”

PN

Price

2”

CBSE1NF

5/8”

2 3/8”

CBSE3NF

7/8”

2 5/8”

CBSE5NF

$46.00 $55.00 $72.00

1/4” Extended Shank Burrs Cylinder Shape Head Dia: 3/8” Head Length: 3/4” Overall Length: 6 3/4” A PN: CBSA3L6

$59.00

Ball Nosed Tree Shape Head Dia: 3/8” Head Length: 3/4” Overall Length: 6 3/4” F PN: CBSF3L6

$59.00

Cylinder Shape with End Cut Head Dia: 3/8” Head Length: 3/4” Overall Length: 6” B PN: CBSB3L6

$59.00

Pointed Tree Shape Head Dia: 3/8” Head Length: 3/4” Overall Length: 6 3/4” G PN: CBSG3L6

$59.00

Radius Ended Cylinder Shape Head Dia: 3/8” Head Length: 3/4” Overall Length: 6” C PN: CBSC3L6

$59.00

Ball Shape Head Dia: 3/8” Head Length: 1/3” Overall Length: 6” D PN: CBSD3L6

$59.00

Ball Nosed Cone Shape Head Dia: 3/8” Head Length: 1 1/5” Overall Length: 6” L PN: CBSL3L6

$59.00 Page 23 - Air Tool Accessories

Oval Shape Head Dia: 3/8” Head Length: 5/8” Overall Length: 6 5/8”

A B

E PN: CBSE3L6

$59.00

C F

D

G L

E

SERIOUS STORAGE SYSTEMS HB Storage Bin Hanging Panels Hanging Panels (set of 2) C/W screws & wall plugs 605W mm x 455H mm x 8D mm

HB Mobile Storage Cart Now you can make your HB bins mobile with this hanging display unit.

With caster wheels (2 with brakes).

This is an excellent time and space saver for any workshop.

Take only what you need to the job, while keep items oganised. HB Bins are easily detached from the to cart.

PN: HP1

$59.00

Model - MS20020K

$799.00

Hanging Panel Kit

MOBILE STORAGE CART

Set of Hanging Panels, 40 x HB210 Bins C/W Screws and wall plugs.

PN: HP1KITB HP1KITR

Heavy Duty Display Kit Galvanised Steel Overall Size: 740W mm x 560D mm x 1460H mm

$169.00 EA

C/W: 72 x HB220B

32 x HB230B

/ HB220R / HB230R

HB Series Heavy Duty Multi-Function Storage Bins

New HB Series Heavy Duty Storage Bins are a versatile solution that adapts to your changing storage requirements.

HB bins can be used as free standing bench storage, wall mounted storage units or on a mobile storage cart.

The new design can take very high load when stacked (100 plus kilograms).

Each HB bin comes with 4 Legs included.

HB Small Short Bin

HB Medium Bin

HB Large Short Bin

105W mm x 137D mm x 76H mm

140W mm x 276D mm x 127H mm

210W mm x 273D mm x 178H mm

PN: HB210B PN: HB210R

The 60 drawer NHD560 takes up to 600 Kg total weight and up to 100 Kg per shelf. Each drawer comes with 2 movable dividers and is acid and oil resistant.

The window front makes it easy to identify the contents.

Model - NHD560

PN: HB230B PN: HB230R

PN: HB239B PN: HB239R

$14.00 ea

HB Medium Duplex Bin

HB Large Duplex Bin

105W mm x 187D mm x 76H mm

C/W C’Board 279W mm x 276D mm x 127H mm

C/W C’Board 420W mm x 375D mm x 178H mm

$4.35 EA

PN: HB235B PN: HB235R

$13.00 ea

PN: HB250B PN: HB250R

$23.00 ea

HD Steel Parts Cabinets HD cabinets take up to 100 kg per shelf. Each drawer comes with 2 movable dividers and is acid and oil resistant. The front face of each drawer features a window which makes it easy to identify the contents.

Model - HD530

$599.00

Model - HD318

$499.00

Model - HD515

$455.00

HD 30 Drawer Steel Parts Cabinet 880W mm x 400D mm x 880H mm Drawer size: 160W mm x 110H mm x 410D mm

$1295.00

HD 18 Drawer Steel Parts Cabinet 550W x 400D x 880H mm Drawer Size: 160W mm x 110H mm x 410D mm

HD 60 Drawer Steel Parts Cabinet 880W x 400D x 1725H mm HD Drawer size:

$9.00 ea

HB Small Bin PN: HB220B PN: HB220R

HD Steel Parts Cabinets

$3.95 EA

160 MM 110 MM

HD 15 Drawer Steel Parts Cabinet 880W x 400D x 440H mm Drawer size: 160W mm x 110H mm x 410D mm

410 MM

Page 24 - Air Tool Accessories

Lockable Cabinets Perfect for the showroom or where lockable storage is required.

Create more display areas in the showroom by adding a Glass Door Display Cabinet or a Steel Door Storage Cabinet.

Both cabinets feature key & combination pin lock, sliding doors for easy access in confined spaces and 2 adjustable shelves.

Stack both cabinets together to raise the display cabinet to eye level.

Model - THD2S

$799.00

Heavy Duty Steel Lockable 3 Shelf Cabinet.

880W mm x 400D mm x 880H mm

Model - DU118M

$599.00

Lockable Steel Door Storage Cabinet 1180W mm x 400D mm x 880H mm

Contents of cabinet not included.

Model - DU118G

$599.00

Lockable Glass Door Display Cabinet 1180W mm x 400D mm x 880H mm

Heavy Duty Parts Cabinets

A great range of professional parts cabinets for the workshop.

The all metal frame is constructed from 0.8 mm galvanized steel.

The moulded drawers are acid and oil resistant.

All drawers come with 1 removable divider.

A5 Model - A5336

$499

Model - A5324

$389.00

.00

36 Drawer A5 Parts Cabinet 586W mm x 290D mm x 937H mm 24 Drawer A5 Parts Cabinet 586W mm x 290D mm x 640H mm

A6 Model - A6330H

$459

Model - A6212H

$279.00

.00

30 Drawer A6 Parts Cabinet 533W mm x 265D mm x 937H mm 12 Drawer A6 Parts Cabinet 362W x mm 265D mm x 571H mm

HEAVY DUTY PARTS CABINETS Model - A7448D

A7 Lockable 48 Drawer Parts Cabinet 586W mm x 270D mm x 970H mm

699.00

Model - A7324D

A7 Lockable 24 Drawer Parts Cabinet 444W mm x 270D mm x 677H mm

525.00

A8

Model - A8560

Mobile Parts Cabinets $499.00

60 Drawer A8 Parts Cabinet 586W mm x 222D mm x 937H mm

Model - A8432

$349.00

32 Drawer A8 Parts Cabinet 466W mm x 222D mm x 642H mm

ST2

Model - ST2460

$499.00

60 Drawer ST2 Parts Cabinet 586W mm x 222D mm x 937H mm Drawer Size: 120W mm x 210D mm x 55H mm

Model - NHD530

$869.00

30 Drawer Parts Cabinet 980W mm x 400D mm x 1010H mm (Including handle and caster wheels)

Page 25 - Air Tool Accessories

A7 Model - A7448

$499.00

Model - A7324

$310.00

48 Drawer A7 Parts Cabinet 586W mm x 222D mm x 937H mm 24 Drawer A7 Parts Cabinet 444W mm x 222D mm x 642H mm

LE

LOCKAB

DOORS

Hand Tools HAND TOOLS

SCREWDRIVER SETS

Metric 9 Piece Ball Point Hex Key Wrench Set

42 Piece Precision Screwdriver Set Set Includes: Handle (20 teeth) & Flexible Extension

Sizes: 1.5, 2, 2.5, 3, 4, 5, 6,8 & 10 mm PN: GXHK9M

PN: GSDS

$38.00

$49.00

10 BIT ANGLE DRIVER SET PN: GPA1600

$29.00

$45.00

Imperial (SAE) 13 Piece Ball Point Hex Key Wrench Set

Non Tamperproof 13 Piece Star Key Wrench Set

Sizes: 0.05”,1/16”, 5/64”, 3/32”, 7/64”, 1/8”, 9/64”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16”, & 3/8”

Sizes: T6H, T7H, T8H,T9H, T10H, T15H, T20H, T25H, T27H, T30H, T40H, T45H, T50H PN: GXTX13

$38.00

4 Piece Hook & Pick Set 61/4” Includes 1 x straight, 1 x 90°, 1 x Offset & 1 x Hook

PN: GXHK19M

Set includes: Flat Head, Hex Head, Phillips Head, Star Head, Small Socket Set 5 mm to 11 mm, Magnetic Drive Unit and 5 x combination bits.

Set includes: 2, 2.5, 3, 4, 5, 6, 7, 8, 10, 12, 14, 17, 19 mm Keys

Jumbo Imperial 13 Piece Ball Point Hex Key Set PN: GXHK34I

PN: GBS49

.00

Set includes: 1/16, 5/64, 3/32, 1/8, 5/32, 3/16, 1/4, 5/16, 3/8, 1/2, 9/16, 5/8, 3/4" Keys

PN: GXHP4

$99.00 EA

$29.00 3 Piece T-Handle Set 1/4”, 3/8” and 1/2” Drive Chrome Vanadium

PN: GBS21

$12.00

14 Piece Gasket Punch Set

Includes: Phillips head (2 x #0, 1, 2) Hex Head (2 x #3,4,5) Flat head (1 x #5, 2) and Star head (2 x #0, 1, 2)

SOCKET SETS

$45.00

Jumbo Metric 13 Piece Ball Point Hex Key Set

49 Piece Bit Set.

21 Piece Magnetic Drive Guide Set

Sizes: T6H, T7H, T8H, T9H, T10H, T15H, T20H, T25H, T27H, T30H, T40H, T45H, T50H PN: GXTP13

PN: GXHK13I

$19

Tamperproof 13 Piece Star Key Wrench Set

Sizes 1/4, 5/16, 3/8, 7/16 1/2, 5/8, 3/4, 7/8, 1, 1 1/8, 1 1/4, 1 3/8, 1 1/2”

PN: GGPS

$65.00 PN: GXTH3

$129.00

Made from Chrome Vanadium Steel

1/4”43 Piece Chrome Vanadium Socket Set

1/2” 56 Piece Chrome Vanadium Socket Set

• 1/4” Drive Sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13 & 14 mm • 1/4” Ratchet Handle 72 Gears • 1/4” Extension Bars 2” & 6” • 1/4” Spinner Handle • 1/4” Universal Joint • 3 Way Adapter • 1/4” Flexible Extension Bar • 1/4” Bit Socket (23 Pieces Torx T8, T9, T10, T15, T20, T25, T27, T30, T40 PH 1, 2, 3 Slotted 4, 5.5, 6.5 Pozi 1, 2, 3 Hex H3, H4, H5, H6, H8 • Blow Mold Case

• 1/2” Drive Sockets sizes: 8, 10, 11, 12, 13,14, 15, 17, 18, 19, 22, 24, 27, 30, 32 mm • 1/2” Ratchet Handle 72 Gears • 1/2” Extension Bars 5” & 10” • 1/2” Park Plug Socket 16 & 21 mm • 1/2” 3 Way Adapter • 1/2” Coupler x 10 mm Hex • 1/2” Bit Sockets 3 Piece T50, T55, T60 • 1/2” Bit Sockets: 31 Piece Torx bits: T10, T15, T20, T25, T27, T30 PH 1, 2, 3, 4, Slotted 6.5, 8, 10, 12 Pozi 1, 2, 3, 4 Hex 4, 5, 6, 8, 10 TP T10, T15, T20, T25, T27, T30, T40, T45 • Blow Mold Case

PN: GP1599-5

$69.00

Page 26 - Hand Tools

PN: GP1599-8

$119.00

Lang Tools represents hand tools that professional technicians and handymen have used for over 80 years, which assures that you are dealing with performance proven consumer preferred, professional high quality products.

12 PIECE COMBINATION INTERNAL / EXTERNAL SNAP RING PLIERS SET

Slim profile tips for tight applications.

CONVERTIBLE RETAINING RING PLIERS

SET OF 2 SWITCHABLE RETAINING RING PLIERS

• Convert between internal and external with a quick flip of a switch • Eliminates the jaw aligning push-pin process • Double-dipped custom grip made of low-temp, high‑impact material

• Spring return handles • Each pliers includes a tip kit containing durable alloy, colour‑coded interchangeable tips and hex key, all stored in a handy pouch

PN: L75

PN: L1450

$119.00

PN: L3495

$249.00

$135.00

Quick Switch Ratchet Pliers with Automatic Lock and Tip Kit. Automatic ratchet lock feature keeps rings open or closed for easy installation and removal.

2 Piece Quick Switch Pliers with Automatic Lock and Tip Kits.

Contains 1ea of L1421 and L1434 models c/w 5 prs of colour coded interchangeable tips and hex key for each.

Ring Size Range

Ring Size Range

Metric

Imperial

• Pliers are convertible for use on internal and external snap rings with cushioned grip handles

Internal

46 mm – 102 mm

1-13/16˝ – 4˝

External

32 mm – 102 mm

1-1/2˝ – 4˝

• Pliers have a knurled centre screw with spring for easy changing and secure hold

Tip Sizes

• Sets are packaged in a plastic blow molded case for protection and easy use

MADE IN THE

U.S.A.

Metric

SAE(Inch)

Bent 15°

2.3 mm, 2.7 mm, 3.0 mm

0.090˝, 0.108˝, 0.120˝

Bent 70°

2.3 mm, 2.7 mm, 3.0 mm

0.090˝, 0.108˝, 0.120˝

Metric

Imperial

Internal

7 mm – 26 mm (L1421) 10 mm – 51 mm (L1434)

1/4” – 1” 3/8” – 2”

External

3 mm: 26 mm (L1421) 7 mm – 51 mm (L1434)

1/8” – 1” 1/4˝ – 2˝

Tip Sizes L1421 Metric

SAE(Inch)

L1421

Retaining Ring Pliers

Straight

0.6 mm, 1.0 mm, 1.2 mm

0.023˝, 0.039˝, 0.047˝

Spring ratchet locking mechanism securely holds against snap ring tension

Bent 90°

1.0 mm, 1.2 mm

0.039˝, 0.047˝

Internal Retaining External Retaining Ring Pliers Ring Pliers

Straight

1.0 mm 1.2 mm, 1.9 mm

0.039˝, 0.047˝, 0.074˝

Bent 90°

1.0 mm, 1.2 mm

0.039˝, 0.047˝

PN: L1485

PN: L1486

Ring Sizes: 78 mm to 159 mm (3-1/16” to 6-1/4”) Tip size: Straight 3 mm (.120”)

Ring Sizes: 89 mm to 165 mm (3-1/2” to 6-1/2”) Tip size: Straight 3 mm (.120”)

L1434

$139.00 EA

Spare Tips to Suit Ext. & Int. Ring Pliers Spare tips available to suit (L1486) External and Internal (L1485) Ring Pliers:

Straight Tips to suit L1485/6 PN: L88600

PN: L279

$129.00

$35.00 EA

45 Degree Tips to suit L1485/6

90 Degree Tips to suit L1485/6

PN: L88645

Brake Calliper Ratchet Press

PN: L88690

Features:

TIP SETS Strong and durable alloy steel tips.

Includes 6 pairs of colour-coded, interchangeable tips, set screws and Hex.

TIP SET to suit L1421Pliers PN: L12

$35

.00

TIP SET to suit L1434 Pliers PN: L14

$35

.00

Page 27 - Hand Tools

TIP SET to suit L75 Pliers PN: L651590

$39

.00

• Four Tools in One • Works on various single, dual & quad piston callipers • Centrally distributes force Working range: 40 mm - 64 mm Length: 235 mm

• Compact design • 360 degrees ratchet swing allows access at any angle

One Year FA C T O R Y

WARRANTY

ools t s & s r e p

cree

Made in the

THE BONE

The Bone™ and Bonester™ feature a uniquely shaped body which cradles the user between the wheels only an inch or so above the ground.

The big, easy rolling wheels are positioned outboard to provide a strong, stable working platform that can’t tip or flip the user. The large diameter wheels roll easily over all sorts of obstacles such as cords and air lines.

EASY RIDER

LOW PROFILE Mechanics Creeper

ROUGH RIDER

U.S.A. 140 KG CAPACITY

1194L x 648W x 160H MM Wheels: Ø130 MM x 25 MM width Load Capacity: 180 Kg Wide Easy Rider Tyres 45 MM Ground Clearance Weight: 8 Kg

PN: BONE6031

$349.00

160 MM PROFILE

ROUGH RIDER Mechanics Creeper The Easy Rider Wheels have soft tyres that grab and roll over frustrating shop clutter.

1194L x 648W x 191H MM Wheels: Ø130 MM x 33 MM width Rough Rider Rider Tyres 73 MM Ground Clearance Weight: 9.1 Kg

The Rough Rider Wheels are designed for use on grass, gravel and dirt or anywhere the going is tough

191 MM PROFILE

SUPER LOW PROFILE The deep, smoothly molded structural ribs add incredible strength and durability without adding bulk & weight; providing welcome ventilation for those hot muggy days. Two inlayed hand-holds make it easy to carry and easy to secure against theft or serial tool borrowers.

Mechanics Creeper

180 KG

1092L x 594W x 114H MM Wheels: Ø75 MM x 22 MM width Load Capacity: 180 Kg Easy Rider Tyres 38 MM Ground Clearance Weight: 6 Kg

CAPACITY

PN: BONE4031

$239.00

THE TAIL BONE The Tail Bone is a totally new approach to creeper seats, easier to use, more comfortable and rolls effortlessly over air hoses, drop cords, shop clutter and rough surfaces. The uniquely designed tripod base is a naturally stable working platform even on uneven floors and surfaces. The super comfortable bucket seat is shaped and sized for real-world people.

Mechanics Stool Ribbed Body

Rough Rider Mechanics Stool Ribbed Body

740L x 800W MM 300 MM Seat Height Load Capacity: 160 Kg Huge 130 MM Easy Rider Tyres 20 MM Ground Clearance Weight: 7 Kg

740L x 800W MM 330 MM Seat Height Load Capacity: 180 Kg Huge 130 MM Ø Rough Rider Tyres 44 MM Ground Clearance Weight: 7.5 Kg

160 KG CAPACITY

PN: BONE5031

$299.00

CAPACITY

PN: BONE7031

$399.00

THE BONESTER

114 MM PROFILE

180 KG

180 KG CAPACITY

PN: BONE5131

$369.00 Page 28 - Hand Tools

HIGH PERFORMANCE DEBURRING TOOLS

24 Piece Deburring Set

Ergonomic Deburring Tool & Blade Set

Set of Multi-Component and Quick Release Handles including a comprehensive range of accessories.

Promotional Quick Release Handle Set with 10 assorted 3.2 mm blades.

Set Includes: 3.2 mm Standard Quick Release Handle (GDSDSDMK) Standard 3.2 mm Deburring blades: 2 x GDSC10, 2 x GDSC101, 2 x GDSC15, 2 x GDSC20, 1 x GDSC30, 1 x GDSC35

PN: GD88030

$220.00

PN: GD88040

$34.00 Set includes:

3 Multi-Component Handles (GDSTSDMK) Heavy Duty 6 mm Quick Release Handle (GDSRSDMK), Micro Deburring blades: GDSP1, GDSP2, GDSP3

Standard Deburring blades: GDSC10, GDSC101, GDSC15 GDSC20, GDSC30, GDSC35

Heavy Duty Deburring blades: GDSR10S, GDSR15S

Telescopic Blade Holders GDSDTP, GDSDTC, GDSVT, GDSCSLONG, GDSKW

Deburring Blades & Scrapers GDSV4, GDSKW9, GDSKW16 GDSCSLONG, GDSSCR6, GDSV2, GDSC1

Double Deburrer

Deburrs both sides of workpiece at same time. Double Deburrer features underneath safety guard.

2 blade holders 2 mm Hex Key

Telescopic Multifunction Deburring Tool

Multi-Component Handle (GDSTSDMK) & blade holder Standard Deburring blades: GDSC10, GDSC15, GDSC20, GDSC30, GDSC35

PN: GDDB

$19

.00

Pack of 5 Hex handle Deburring Tools Set of 5 3/8" Hex Handle Deburring Tools A/F Hex. Aluminium body handle with replaceable GDSC10 blades.

Deburring Tool with 3 MC 3.2 mm blade

6 mm Heavy Duty Quick Release Deburrer

PN: GN80

$11.95

PN: GD38325

$38.00

3.2 mm Standard Quick Release Handle (GDSDSDMK) with Multi‑cutting Edge Deburring blades: GDSMC10, GDSMC20, GDSMC101

Double Deburrer blade set

Pack of 10 Hex Handle Pocket Deburrers Set of 10 Hex Handle Pocket Deburrers. 8 mm Hex Aluminium body handle with Pocket clip & C-10 blade. Blade cannot be replaced.

PN: GD38333

$29.00

PN: GD86060 PN: GDSRSDMKK

$30.00

6 mm Heavy Duty Quick Release Handle (GDSRSDMK) with 6 mm General Purpose Blade (GDSR10S).

Page 29 - Hand Tools

$56.00

PN: GD86110

$56.00

Hand Tools Gear & Bearing Splitting Combination Set

Multi-Hydraulic Gear Puller Kit Bearing Separator

Small Bearing Separator

S45C Drop Forged hardened Bearing Separator.

Jaw Range: 30-50 mm Working Range: 0-135 mm

Working Range: 0-370 mm Jaw Range: 75-105 mm

Large Bearing Separator

Gear Puller

Jaw Range: 50-75 mm Working Range: 0-180 mm

Working Range: 0-185 mm Set includes: Twin & Triple Leg Heads Hydraulic Ram (12 Ton capacity) Carbon Steel Beam 200 mm, 150 mm, & 100 mm arms 85 mm, 35 mm, Spacers 25 mm Centre Adapter

Includes Centre Adapter.

S45C Drop Forged hardened Main Beam and Bearing Separators.

PN: GBTK

PN: GHPK

$189.00

$499.00

RIVETING TOOLS

Made in Japan.

Hand Operated Nutsert Set Set includes aluminium M4, M5, M6 & Steel M6 nutserts, M4, M5, M6 Mandrels and instructions.

Heavy Duty Hand Riveter

Riveting sizes: 2.4, 3.2, 4.0, 4.8 mm • Die-cast aluminium body • High carbon steel Handle • Nonslip comfortable grip.

Extra nutserts available in packs of 50

PN: SNPRO3000

$49.00

PN: SNSC456

$169.00

Heavy Duty Long Nose 2-way Hand Riveter

Long Handled Nutsert Tool

• Sets nutserts into Aluminium & Steel Includes: M4, M5, M6, M8, M10 Mandrels Weight: 1.5 kg

PN: SNHN096

$295.00

Heavy Duty Air/ Hydraulic Nutsert Tool

Lazy Tongs Heavy Duty Hand Riveter

This heavy duty tool is suitable for setting aluminium, steel and stainless steel nutserts from 4 mm to 10 mm.

Manual nutsert release spindle.

Includes: M4, M5, M6, M8, M10 mandrels, Weight: 1.5 kg

Aluminium & steel nutserts available in packs of 50.

Extended Length: 860 mm Contracted Length: 310 mm Riveting sizes: 3.2, 4.0, 4.8 mm SNSC50 PN: SNAN800

$959.00

$195.00

Page 30 - Hand Tools

Riveting sizes: 2.4, 3.2, 4.0, 4.8 mm • Die-cast aluminium body • High carbon steel Handle • Nonslip comfortable grip.

SN10000

$115.00

ENGINEERING EQUIPMENT MADE IN

JAPAN

SCREW PITCH GAUGES

DIVIDERS & CALIPERS Spring Divider 12”

8” Divider PN: FM0218

$24

PN: FM0912

$25.00

.00

8” Inside Caliper PN: FM0238

Inside Caliper 12” PN: FM1012

$24.00

$25.00

8” Outside Caliper Outside Caliper 12” Metric & Whitworth Pitch Gauge Range: Whitworth 60° 4-62, Metric 55° 0.25-6 52 Leaves

Unified 60° Pitch Gauge

Unified 60° Pitch Gauge

Range: Metric 60° 4-42 TPI 30 Leaves

Range: Metric 60° 0.25-2.5 mm 28 Leaves

PN: FT163

PN: FT006

$48.00 Range: 0.75 to 5 mm Increments: 0.25 mm Range: 5.5 to 13 mm Increments: 0.5 mm

$25.00

5 PIECE PIN PUNCH SET

6 Piece Hollow Punch Set

$38.00

RADIUS GAUGES

$24

PN: FM1112

.00

HOLLOW PUNCH SET

PN: FT156

$38.00

PN: FM0228

Set includes: 5 mm, 6 mm, 8 mm, 9 mm, 11 mm, & 13 mm.

Length: 200 mm Sizes: 3.2, 4.8, 6.4, 8, 9.5 mm

PN: YC516

$25.00

PN: GPP5

PN: FT272MA

$39

$28.00

.00

PN: FT272MB

$49.00 Pocket Depth Gauge

Welding Gauge Metric

Range: 0-50 mm

Range: 0-50 mm

FEELER GAUGES 150 mm Feeler Gauge Set

200 mm Feeler Gauge Set

300 mm Feeler Gauge Set

20 Blades Range: 0.05 to 1 mm Increments: 0.05 mm

20 Blades Range: 0.05 to 1 mm Increments: 0.05 mm

20 Blades Range: 0.05 to 1 mm Increments: 0.05 mm

PN: FTPDG50

$69.00

PN: GFG150

$22.00

PN: FTNWG94

$94.00

HEAVY DUTY TROLLEYS Heavy Duty Parts Trolley

$25

1 5 0 Kg!

$35.00

.00

Max Load Heavy Duty 3 Shelf Parts Trolley

PN: GFG300

PN: GFG200

Heavy Duty Parts Trolley

Takes Up Thoelf!

1 0 0 Kg P e r S

Max Load

1 5 0 Kg! 1.6 mm steel uprights.

Max Load: 150 Kg 410W x 760D x 885H mm

PN: GT3S

$239

.00

3 Shelves, side container and drawer 1.6 mm steel uprights 470W x 785D x 825H mm

PN: GT3SD

$279

Page 31 - Engineering Equipment

.00

Max Load: 200 Kg 500W x 873D x 880H mm

PN: CTH5086

$445.00

ENGINEERING EQUIPMENT 150 mm Plate Shear Cuts up to 5 mm Mild Steel

NUMBER & LETTER PUNCHES

PN: PS6

$235.00

Each set packed in a ABS-red strong plastic case.

Made from S 55C High carbon steel, HRC 58~60 Degrees.

Kit includes: One Piece Type Holder, hexagon wrench, Steel types* 100 piece (A-Z, 0-9 ,& ,/ ,- , blank space). The holder can accommodate 9 pieces of our 3 MM steel types.

3 mm Punch Holder Set PN: GYC610-3

$399

.00

6 mm Punch Holder Set PN: GYC610-6

$499.00

36 Piece/4 mm Letter & Number Punch Set

WORK LAMPS

9 Piece/6 mm Number Punch Set OTHER SIZES AVAILABLE

OTHER SIZES AVAILABLE

PN: GYC602-6

$32.00

PN: GYC607-4

$55.00

90 LED Magnifier Work Lamp 90 Super Bright LED’s (Ø290 mm Array) Glass Lens 3 x Magnification (Ø120 mm) All metal frame construction 240V mains power (2 Metre Cord) Bench mounted up to 55 mm thickness.

PN: ML90

$169.00

VICES

ANGLE VICES 60 mm Opening Welders Angle Vice

Drill Press Vice 4” Drill Press Vice PN: TV102-4

$38

Halogen Lamp Medium Arm

.00

6” Drill Press Vice PN: TV102-6

$68

.00

PN: TV274

$129.00

100 mm Opening Welders Angle Vice PN: TV275

$179.00

24 Volt/70W PN: AL101A

$149.00 Halogen Lamp Medium Arm 24 Volt/70W

Compact Halogen Lamp Halogen Lamp no arm 24 Volt/70W

8 Drill Press Vice PN: AL101B

$139

.00

Machine Vice. Holds round workpieces.

Reversible mount for smaller bar diameters.

PN: AL101C

$129.00

240V to 24V Transformer To Suit AL Halogen Lights (Safety Approved No. N16803)

ROUND VICE

PN: GVSR

$299.00 4” Cross Vice PN: TV144-4

$110

.00

6” Cross Vice PN: TV144-6

$195.00

PN: AL24024

$79.00

Page 32 - Engineering Equipment

PN: TV122-8

$299.00

ENGINEERING EQUIPMENT Made in Italy.

SOLUBLE CUTTING OIL 1 Litre Soluble Cutting Oil Mix with water 1:10

5 Litre Soluble Cutting Oil Mix with water 1:10

Range: 0 mm-13 mm.

J6 Mount Keyless 16 mm Drill Chuck.

Range: 3 mm-16 mm.

3/8” Mount LD 10 mm Keyless Drill Chuck

KEYED CHUCKS

SOLOIL1

$19.00

PN: PORLDP10F38R Capacity: 1.5-10 mm Mount: 3/8” x 24 TPI

SOLOIL5

1/2” Mount LD 10 mm Keyless Drill Chuck

$69.00

$59.00 EA

J6 MOUNT KEYLESS CHUCKS J6 Mount Keyless 13 mm Drill Chuck.

KEYED CHUCKS

PN: VKD102

$110

.00

Capacity: 2.5 mm-13 mm.

Includes Key

J6 Mount Keyed 16 mm Drill Chuck

PN: VKD104

$129

.00

Capacity: 2.5 mm-16 mm.

Includes Key

KEYLESS CHUCKS SPANNERS Spanner to suit a VKD102 Keyless Chuck J6 Mount.

PN: VKD102SPANNER

Spanner to suit a VKD104 Keyless Chuck J6 Mount.

PN: VKD104SPANNER

J6 Mount Keyed 13 mm Drill Chuck

PN: PORLDP10F12R Capacity: 1.5-10 mm Mount: 1/2” x 20 TPI

3/8” Mount LD 13 mm Keyless Drill Chuck

PN: PORA13J6

$55.00

PN: PORLDP13F38R Capacity: 2-13 mm Mount: 3/8” x 24 TPI

PN: PORAP16J6

$95.00

1/2” Mount LD 13 mm Keyless Drill Chuck

$74.75 EA

PN: PORLDP13F12R Capacity: 2-13 mm Mount: 1/2” x 20 TPI

HSS Cross Hole Countersink Bits

HSS Counter Sink Set

Machined from High Speed Steel.

5 Piece HSS Cross Hole Style Countersink Set

$16.00 EA

Sizes include: 2-5, 5-10, 10-15, 15-20, 20-25 mm / 90°

DRILL CHUCK ARBOR

PN: GCS5S

$129.0

Drill Chuck Arbor MT2 x J6 PN: DCAMT2J6

$19.00

Size: 25-30 mm / 90° Size: 35-40 mm / 90° Shank Dia: 15 mm Shank Dia: 15 mm

Drill Chuck Arbor MT3 x J6

PN: GCS2530

$59

PN: DCAMT3J6

$23

.00

PN: GCS3035

PN: DCAMT4J6

$65

.00

STAINLESS HARDENED RULES 150 mm Stainless Hardened Dual Scale Rule 300 mm Stainless Hardened Dual Scale Rule

PN: GCS3540

$89.00

Size: 30-35 mm / 90° Size: 40-50 mm / 90° Shank Dia: 15 mm Shank Dia: 18 mm

Drill Chuck Arbor MT4 x J6

$32

.00

PN: AS1015

$6.90

PN: AS1030

$13.80

.00

PN: GCS4050

$199

.00

Centre Drill Set 5 Piece Centre Drill Set Sizes 1 to 5 PN: GCDS

$32.00 Page 33 - Engineering Equipment

3 Flute HSS Countersinking Bit Set Tinite coated 12 Piece Set Sizes include: 2-25 mm / 90° PN: GCS3F12

$169.00 3 Piece Double Spiral Step Drill Set 4-12 mm, 4-20 mm, 4-32 mm HSS Tinite Coated PN: G3SD

$139.00

LAST CHANCE LIQUIDATION SALE!

PRICED TO

MOVE!

VERNIER PROTRACTOR

COMBINATION SET SQUARE Includes Square Head, Centre Head, Ruler and Protractor Head

RRP $110

Set includes: Protractor, Aux. Arm, 150 mm, 200 mm, 295 mm arms

Now $CO7MB9 PN: MSET

RRP $65

Now: UB$PV3ER 9

Range: 0-360° Increments: 5 amin

DEPTH VERNIERS 150 mm Depth Vernier

RRP $39

NowST$O2C5K!

Range: 0-150 mm LOW PVER150 PN: DE Increments: 0.02 mm

200 mm Depth Vernier

RRP $44

$25 No:w DEPVER200

Range: 0-200 mm PN Increments: 0.02 mm

RRP $39

6” Depth Vernier

NowST$O2C5K!

LO W Range: 0-6” PN: DEPVER6 Increments: 1/1000”

PN

UNIVERSAL BEVEL PROTRACTOR Range: 0-320° Increments: 2 amin

RRP $119

$69 Now : UNIVBEV PN

RRP $44

8” Depth Vernier

NowST$O2C5K!

LOW Range: 0-8” PN: DEPVER8 Increments: 0.001”

PRECISION LEVEL Accuracy: 250/0.2 mm per 1000 mm

300 mm Depth Vernier

RRP $55

Now $29

K! Range: 0-300 mm LOW STOC 0 ER30 Increments: 0.02 mm PN: DEPV

Telescopic Gauge Set Six Piece Set Range: 8-150 mm

RRP $54

Now: TELC$HI3N 5 PN

RRP $55

12” Depth Vernier

NowST$O2C9K!

LOW Range: 0-12” PN: DEPVER12 Increments: 0.001”

RRP $149

Now: GP$L25099 PN

Micrometer BORE DIAL Stand with Fine GAUGES adjustment • Magnetic base with switch

35 mm Dial Bore Gauge

• V-block base

Range: 18-35 mm Accuracy: ±0.01 mm

RRP $45

160 mm Dial Bore Gauge

PN

Range: 50-160 mm Accuracy: ±0.01 mm

No:wMAGS$TA2ND9

250 mm Dial Bore Gauge Range: 160-250 mm Accuracy: ±0.01 mm

DIGITAL DUAL SCALE VERNIER

450 mm Dial Bore Gauge Range: 250-450 mm Accuracy: ±0.01 mm

1000 mm Dual Scale Digital Vernier 0-1000 mm / 0-40” Graduations 0.01 mm / 0.001”

RRP $799

$489!

Now ST OCK LOW

PN: DIGVER40

Page 34 - Engineering Equipment

RRP $89

Now $O7C9K! LOW ST

PN: DBORGA18

RRP $149

Now $O7C9K! LOW ST

PN: DBORGA50

RRP $189

NowST$O7C9K! LOW

PN: DBORGA16

0

RRP $189

NowST$O9C9K! LOW

PN:

DBORGA250450

1.5” Dial Bore Gauge

RRP $149

NowST$O7C9K!

LOW Range: 0.7-1.5” PN: DBORGA07 Accuracy: ±0.0001”

6” Dial Bore Gauge

RRP $189

NowST$O7C9K!

LOW Range: 2-6” DBORGA26 Accuracy: ±0.0001” PN:

16” Dial Bore Gauge

RRP $189

Now $79

K! LOW STOC Range: 10-16” DBORGA1016 : PN Accuracy: ±0.0001”

LAST CHANCE LIQUIDATION SALE! OUTSIDE METRIC MICROMETERS P $155 250 mm Micrometer RR

Metric Dial Gauge PN: DGAI1K

PN: DGAM25K

Range: 225-250 mm Increments: 0.02 mm

Range: 0-25 mm Increments: 0.01 mm

Range: 0-1” Increments: 0.001”

Includes Dial Indicator, 22 Piece Contact Points Set and blow‑mold case.

Includes Dial Indicator, 22 Piece Contact Points Set and blow‑mold case.

NowST$O6C9K! LOW

PN: MIC22525

0

Now $69!

Range: 250-275 mm Increments: 0.02 mm

Range: 75-100 mm Increments: 0.02 mm

K LOW STOC 5 PN: MIC25027

RRP $65

300 mm Micrometer RRP $185

PN

Range: 275-300 mm Increments: 0.2 mm

$39 Now : MIC75100

NowST$O6C9K! LOW

PN: MIC27530

175 mm Micrometer RRP $110

500 mm Micrometer RRP $369

Range: 150-175 mm Increments: 0.02 mm

Range: 400-500 mm Increments: 0.02 mm

Now $65

K! LOW STOC PN: MIC15017

P $125 200 mm Micrometer RR

NowST$O6C5K!

Range: 175-200 mm Increments: 0.02 mm

LOW

PN: MIC17520

225 mm Micrometer Range: 200-225 mm Increments: 0.02 mm

5

0

RRP $139

NowST$O6C9K! LOW

PN: MIC20022

5

0

3” Micrometer Range: 2-3” Increments: 0.0001”

4” Micrometer Range: 3-4” Increments: 0.0001”

4-5” Micrometer Range: 4-5” Increments: 0.0001”

6” Micrometer

NowST$O3C5K!

LOW

PN: MIC40050

0

Now ST$O2C7K9!

Range: 500-600 mm Increments: 0.02 mm

LOW

PN: MIC50060

0

800 mm Micrometer RRP $755

$599!

Now ST OCK

Range: 700-800 mm Increments: 0.02 mm

RRP $65

NowST$O3C9K!

10” Micrometer

RRP $89

11” Micrometer

PN: MIC34

NoPNw: MI$C455 5 RRP $95

Range: 5-6” Increments: 0.0001”

NowST$O6C5K!

7” Micrometer

RRP $110

Range: 6-7” Increments: 0.0001”

8” Micrometer Range: 7-8” Increments: 0.0001”

9” Micrometer

PN: MIC23

LOW

LOW

PN: MIC56

NowST$O6C5K! LOW

PN: MIC67

RRP $125

Now $65!

LOW STOC PN: MIC78

K

Set & FREE Points Case!

Blow‑Mold $39.00 EA

600 mm Micrometer RRP $455

Range: 8-9” Increments: 0.0001”

LOW

Imperial Dial Gauge

$259!

Now ST OCK

LOW

PN: MIC70080

0

OUTSIDE IMPERIAL MICROMETERS RRP $49

MOVE!

1” Dial Indicator & Point Sets

69 275 mm Micrometer RRP $1

100 mm Micrometer

PRICED TO

Range: 9-10” Increments: 0.0001”

Range: 10-11” Increments: 0.0001”

12” Micrometer Range: 11-12” Increments: 0.0001”

16” Micrometer Range: 12-16” Increments: 0.0001”

20” Micrometer Range: 16-20” Increments: 0.0001”

RRP $139

250 mm Tubular Micrometer Accuracy: ±0.01 mm Range: 50-250 mm

NowST$O6C9K!

RRP $195

NoPNw: MI$CT1UB10

Increments: 0.01 mm Range: 0-25 mm

LOW

PN: MIC89

RRP $98

RRP $155

NowST$O6C2K!

NowST$O6C9K!

LOW

LOW

PN: MICDEP02

PN: MIC910

RRP $169

NowST$O6C9K! LOW

PN: MIC1011

RRP $185

NowST$O6C9K! LOW

PN: MIC1112

RRP $339

Now ST$O15CK9!

100 mm Tubular Micrometer Extension

LOW

PN: MIC1216

RRP $65

RRP $369

$35 No:w MICTUBEX T

Now $159!

LOW STOC

K

PN

PN: MIC1620

OUTSIDE MICROMETERS SETS

INSIDE MICROMETERS

6-12” Micrometer Set

4” Inside Micrometer

Set includes 6 Micrometers

Range: 3-4”

RRP $569

$299!

Now ST OCK LOW

25 mm Depth Micrometer

PN: MICSET61

2

RRP $110

NowST$O6C5K! LOW

PN: MICIN34

Page 35 - Engineering Equipment

5

Distributed by:

Valid 1st October, 2015 to 28 th February, 2016. All prices quoted include GST.

MOBILE SORTING CARTS

PIVOT DRAWERS See full range on page 24.

6 Compartment Pivot Drawer Set.

PN: FO306

Wall mountable

Mobile Tip Out Sorting Cart C/W 2 x FO308, 2 x FO306, 2 x FO605 and 2 x FO604 600W mm x 1200H mm

8 Compartment Pivot Drawer Set.

PN: FO308

$24.00

Wall mountable

PN: MSFO4568

$489

$24.00

300W x 86D mm x 250H mm

.00

300W x 67D mm x 200H mm

5 Compartment Pivot Drawer Set.

Double Sided Mobile Tip Out Sorting Cart

Wall mountable

C/W 4 x FO308, 4 x FO306, 4 x FO605 and 4 x FO604

PN: FO605

$34

600W mm x 103D mm x 150H mm

.00

4 Compartment Pivot Drawer Set. Wall mountable

PN: FO604

$42.00

600W mm x 140D mm x 200H mm

600W mm x 1200H mm PN: MSFO4568X2

$644.00

SURFACE PREP ACCESSORIES 50 mm Quick-Lock Mini Flap Discs 60 Grit Mini Flap Discs 50 mm Quick-Lock (Pack of 5) PN: AB22012F60

See full range on page 9.

NEW!

80 Grit Mini Flap Discs 50 mm Quick-Lock (Pack of 5) PN: AB22012F80

Pack of 5.

$22.00 EA

75 mm Quick-Lock Sanding Discs

360° Keyless 10 mm Drill Attachment Chuck Capacity. 1.5-10 mm Angle Range: 360° / 16 increments Max. speed: 3500 RPM Max torque: 35 Nm Drive: 6 mm Hex Weight: 465 G

NEW!

36 Grit Sanding Discs 75 mm Quick-Lock (Pack of 5) PN: AB22013S36

NEW!

Pack of 5.

80 Grit Sanding Discs 75 mm Quick-Lock (Pack of 5) PN: AB22013S80

$14.00 EA

3” Quick-Lock Preparation Kit 7 Piece kit includes 1 of each: 1/4” shank, 3” backing pad, 24 Grit 3” disc, 36 Grit 3” disc, 50 Grit 3” disc, Brown (Coarse) surface prep 3” disc & Maroon (Medium) surface prep 3” disc.

NEW! PN: GPK3

$39

.00

• Fits all standard power tools and screwdrivers.

• Includes T handle locking wrench.

• Metal Body, Hard Nylon chuck

Not all products in this brochure are available from all outlets. Prices may vary in some country areas due to freight costs. All products in this brochure were available at time of printing. M. Gamer Pty. Ltd. and National Tool Distributors will do everything possible within reason to maintain stocks of products. M. Gamer Pty Ltd and National Tool Distributors reserves the right to change prices without notice. ALL PRICES QUOTED INCLUDE GST.

PN: PORRADAV360CL

$249.00

Made in Italy.