Issuu on Google+

Catalogue


The Stanley® Works Pty Ltd Stanley® Australia manufactures and markets a range of premium quality professional hand tools and accessories, under the Stanley®, Sidchrome®, Bostitch® and ABW® brands, which are guaranteed in accordance with the following: All product is guaranteed against defects in workmanship and materials and will be repaired or replaced free of charge. • T his guarantee does not cover modified, abused, neglected or excessively worn product as a result of improper use. • C  onsumable items, such as trimming knives, drill points, surform blades, hacksaw blades, hole saws, staples or nails, if they have been used are not subject to this guarantee. • U  ltrasonic measuring tools and air tools are excluded from this guarantee. • F or certain items that are defective but repairable, it may only be necessary to replace a particular part. Where this is applicable only the required part will be replaced free of charge.

• T he following is a list of those items which are repairable: socket ratchets, flexbars, torque wrenches, bit braces, hand drills, planes & laser levels. • F or socket ratchets where fair wear and tear has occurred, the only options are to have it repaired or for the customer to purchase a new product. • A  ny product subject to a guarantee claim, must be returned to the place of purchase. Upon acceptance of the claim, the product will be replaced or repaired free of charge. • R  eliance is placed on the product knowledge and judgement of STANLEY® distributors and representatives to approve the replacement of defective product should it occur. • T his Guarantee is offered in addition to all statutory rights conferred on the consumer. It is also a term of the contract, that to the full extent permitted by the law: the liability of Stanley® Australia for any breach of a condition or guarantee implied by law is limited to replacement of the product.


Contents

05 12 20 29 38 45 52 60 67 Measuring

Layout

Electronic Layout

Knives & Blades

Saws

Planes & Surform

Clamps & Pliers

Hammers & Demolition

Chisels

73 89 95 96 110 121 130 134 151 Screwdrivers

Fastening

Illumination

Mechanics Tools

Automotive Specialty Tools

Tool Storage

Apprentice Kits

Hardware

Product Index


New in ‘08 Stanley® Security Locks

FatMax® Xtreme™ Levels

FatMax® & FatMax® Xtreme™ Snap-off Knives

FatMax® Fubar II

FatMax® Xtreme™ AntiVibe™ Hammer

FatMax® Xtreme™ Hammer Tacker with Blade

FatMax® Xtreme™ Auto Trigger Clamp

FatMax® Specialty Saws

FatMax® Xtreme™ Chalk

4

FatMax® Xtreme™ Permanent Markers

Visit us at: www.stanleytools.com


Measuring Stanley® Innovation Advantage – BladeArmor™ Coating BladeArmor™ Coating is a patented industrial thermoplastic coating, the very same material that has been used to strengthen and protect aircraft parts, such as the rotor blades on the SIKORSKY® Black Hawk® Helicopter. Simply put, it helps aircraft survive war zones. Turns out, it also helps tape blades survive construction zones. By applying BladeArmor™ Coating to our tape blades, we’ve dramatically reduced both tape breakage and tape returns, enabling it to conquer the toughest testing ground of all – the job site!

BladeArmor™ Coating

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

5


MEASURING

Measuring Tape Selection Guide Stanley’s measuring innovation has established Stanley® as a leading worldwide Tape Rule manufacturer. Our expanded line builds on this great heritage. For example, our new FatMax® Xtreme™ Tape Rules features 4m of blade standout, the longest in the world. We’ve also improved our tapes by adding BladeArmor™ coating to PowerLock™, FatMax® and FatMax Xtreme® Tape Rules to extend the life of the blade. And that’s only the beginning. Take a look at our tape line and see why after years of innovation, Stanley’s Tape quality and durability are unmatched.

Short Tapes STANDOUT

TAPE WIDTH

CASE TYPE

LENGTHS

FatMax® Xtreme™

4m

32mm

Chrome/Rubber

8m

FatMax®

3.3m

32mm

ABS/Rubber

8m

Max®

2.7m

28mm

ABS/Rubber

8m, 10m

PowerLock™

2.4m

25mm

Chrome

8m, 10m

Stanley® Yellow

2.1m

12mm, 19mm, 25mm

ABS

3m, 5m, 8m

Bi-Material

2.1m

25mm

ABS/Rubber

8m

GEAR RATIO

TAPE WIDTH

BLADE TYPE

LENGTHS

FatMax® Closed Case

3 to 1

9mm

Stainless Steel

30m

Stanley® Closed Case

N/A

9mm

Steel

20m, 30m

FatMax® Open Reel

3 to 1

19mm

Fibreglass

30m, 60m

Stanley® Open Reel

N/A

12mm

Fibreglass

30m, 60m

Long Tapes

6

Visit us at: www.stanleytools.com


MEASURING FatMax® Xtreme™ Tape Rules with Blade Armor™ Coating

32mm wide blade for easy readability with 4 metre blade standout - the longest in the industry. Blade FX® high visibility Blade Armor™ coating on first 150mm. Entire blade coated with Mylar* polyester film. Highly polished chrome case moulded with soft grip rubber.

*Mylar is a registered Trademark of DuPont Teijin Films ITEM # 33.893 33.894

BLADE LENGTH 8m/26’ 8m

BLADE WIDTH 32mm 32mm

BOX QTY 4 4

FatMax® Tape Rules with Blade Armor™ Coating Blade Armor™ coating is a patented industrial thermoplastic coating. It’s on the first 150mm of the FatMax® Tape Rules for maximum durability and reduced blade breakage. Heavy-duty Mylar* Polyester film coating extends blade life up to ten times longer. FatMax® tapes have a 32mm wide blade (25% wider) with a huge 3.3 metres of standout and easy to read graphics. *Mylar is a registered Trademark of DuPont Teijin Films BLADE LENGTH 8m/26’ 8m

BLADE WIDTH 32mm 32mm

BOX QTY 4 4

SHORT TAPES

ITEM # 33.731 33.732

Max® Tape Rules

28mm blade width, Stanley® patented 2.7m Blade Standout. Air Grip™ Slide Lock brake. Soft Touch for comfort & grip plus greater resistance to breaking when dropped. Finger operated bottom blade brake gives better retraction, control & reduces tape damage. Larger graphics (up to 15% bigger) for easy reading. Mylar* coated blade for superior abrasion resistance. Large multi catch hook for maximum grip. Metal Mouth Guard stops blade from cutting into side of tape case, a common cause of tape damage. *Mylar is a registered Trademark of DuPont Teijin Films ITEM # 33.963 33.966 33.964 33.967

BLADE LENGTH 8m/26’ 8m 10m/33’ 10m

BLADE WIDTH 28mm 28mm 28mm 28mm

BOX QTY 6 6 6 6

PowerLock™ Tape Rules

The Powerlock™ Tape Rule is reinforced with Blade Armor™ coating on the first 150mm for maximum durability and reinforced blade breakage. Mylar* blanket wrap coating extends blade life up to 10 times. Heavy duty high impact chrome plated case. Heat treated spring for longer life. Easy reach blade with 2.1 metres of standout. Thumb control positive blade lock. Tru-Zero, three rivet end hook for inside and outside measuring.

PowerLock

*Mylar is a registered Trademark of DuPont Teijin Films ITEM # 33.429 33.825 33.432 33.433

BLADE LENGTH 26’/8m 8m 33’/10m 10m

BLADE WIDTH 25mm 25mm 25mm 25mm

BOX QTY 14 14 14 14

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

7


MEASURING Stanley® Yellow Tape Rules

High contrast polymer coated blade for easy readability and long life. 2.1 metre standout. Durable textured case for non slip grip. Thumb control positive blade lock. Tru-Zero, three rivet end hook for inside and outside measuring. ITEM # BLADE LENGTH BLADE WIDTH 30.486 3m/10’ 12mm 30.487 3m 12mm 30.496 5m/16’ 19mm 30.497 5m 19mm 30.458 8m/26’ 25mm 30.459 8m 25mm 30.458M* 8m/26’ 25mm 30.459M* 8m 25mm * Ships in a counter top merchandiser

BOX QTY 4 4 16 16 16 16 12 12

SHORT / LONG TAPES

Stanley® Yellow Tape Rules - 3 Pc Trade Pack High contrast polymer coated blade for easy readability & long life. 2.1 metre standout. Durable textured case for non slip grip. Thumb control positive blade lock. Tru-Zero, three rivet end hook for inside & outside measuring. ITEM # 30.459A

BLADE LENGTH 8m

BLADE WIDTH 25mm

BOX QTY 7

Stanley® Bi-Material Tape Rules

Bi-Material case for improved grip and comfort. Corrosion resistant nylon coated blade; 25mm wide. Three rivet hook for reduced blade breakage 40% stronger than a two rivet hook. Tru-Zero hook, for accurate internal and external measurements. ITEM # BLADE LENGTH BLADE WIDTH 30.656M* 8m/26” 25mm 30.657M* 8m 25mm * Ships in a counter top merchandiser

BOX QTY 12 12

FatMax® Open Reel Fibreglass Long Tapes

Extra wide 19mm blade for easy readability. 64 Fibreglass strands for 2X blade strength. Rewinds 3X Faster with 3:1 Gear Ratio. Abrasion resistant clear coated blade with 2-sided blade graphics in fractional inch/decimal foot scales. Double reinforced blade end for strength and durability. Folding Tru-Zero end hook for accurate inside and outside measurements. End loop for easy pulling and anchoring. Cushion grip handle, stabilising ground point, high visibility, high impact ABS case is durable and easy to find on the job site. ITEM # 34.814 34.824

8

BLADE LENGTH 30m 60m

BLADE WIDTH 19mm 19mm

Visit us at: www.stanleytools.com

BOX QTY 2 2


MEASURING Open Reel Fibreglass Long Tapes

Increased number of fibreglass strands means less stretch and better accuracy. Blades are made with PVC, so the tape can be wound wet and easily cleaned. Two-sided printing with multiple formats (fractional/ decimal or metric/English). 12mm wide blade with easy to read markings for accurate measurements. Rubber grip for comfort. High visibility colour makes it easy to find on the job site. ITEM # 34.791 34.792 34.794 34.795

BLADE LENGTH 100’/30m 30m 200’/60m 60m

BLADE WIDTH 12mm 12mm 12mm 12mm

BOX QTY 2 2 2 2

3 to 1 gear drive for fast rewind. Stainless steel blade for long life. High impact ABS case with rubber, nonslip grip. Tru-Zero end hook for inside and outside measurements. Steel roller cage to protect case from being cut by blade during retraction. ITEM # 34.132 34.138

BLADE LENGTH 100’/30m 30m

BLADE WIDTH 9mm 9mm

BOX QTY 6 6

Stanley® Steel Long Tapes

High impact, high visibility yellow ABS case. 9mm wide yellow blade with polymer coating for durability. 0.11mm thick steel blade. Easy wind drum. Easy to read markings. Lock ring recoils neatly into contoured case. ITEM # 34.105 34.107 34.108

BLADE LENGTH 20m 100’/30m 30m

BLADE WIDTH 9mm 9mm 9mm

LONG TAPES / RULES

FatMax® Steel Blade Long Tapes

BOX QTY 6 6 6

Longlife Folding Rules

Virtually unbreakable tough engineering plastic. 35.444: mm, 5mm figured every 10mm on both sides. 35.445: mm, 5mm figured every 10mm one side; inches, 8ths on the other side. ITEM # 35.444 35.445

LENGTH 1m 3’/1m

BOX QTY 10 10

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

9


MEASURING High Visibility Contractor Grade Folding Rule

Virtually unbreakable tough engineering plastic in high visibility yellow. Millimeter graduations, 5mm figured every 10mm on both sides. ITEM # 35.464

LENGTH 1m

BOX QTY 10

Folding Steel Rules - Rustless

35-330: Subdivided mm, figured every 10mm in mm, on both sides 35-331: Subdivided mm, figured every 10mm in mm, one side; subdivided inched in 16ths other side. ITEM # 35.330 35.331

LENGTH 600mm 24’/600mm

BOX QTY 5 5

RULES

Line of Chords Rules

These incorporate a scale and two centre dots, so an angle can either be set or determined, with the aid of dividers. 35-332: Subdivided inches in 8ths, 16ths and Line of Chords scale, one side; subdivided inches in 8ths and circumference scale in 8ths, other side. 35-333: Subdivided mm and Line of Chords scale, one side; subdivided mm and circumference scale in mm, other side.

ITEM # 35.332 35.333

LENGTH 24’ 600mm

BOX QTY 5 5

Rustless Steel - Metric/English - 2 Sided

Engineers precision steel rules with 2 sides and 4 edges. Fully graduated. Metric: 0.5mm. English: 16ths/32nds/64ths/10ths/20ths/50ths/100ths.

ITEM # 35.400 35.401 35.402 35.403

LENGTH 6’/150mm 12’/300mm 24’/600mm 33’/1000mm

BOX QTY 10 10 1 1

Rustless Steel - Metric - 2 Sided

Engineers precision steel rules. Reverse graduated. Metric: 1mm/0.5mm. ITEM # 35.409 35.410

10

LENGTH 150mm 300mm

Visit us at: www.stanleytools.com

BOX QTY 10 10


MEASURING Rustless Steel - Metric - 1 Side

Engineers precision steel rules. Metric: 1mm/0.5mm. ITEM # 35.425 35.426

LENGTH 600mm 1000mm

BOX QTY 1 1

Stainless Steel - Metric/English - 2 Sided

Double sided, Metric and English. 4 edges with one round end. Metric:1.00mm. English: 8/16. Ideal for DIY measuring and marking. LENGTH 6’/150mm 12’/300mm 24’/600mm 33’/1000mm

BOX QTY 6 6 4 2

Counter Measures – Brass

Hard rolled brass with deep etched black figures and graduations. Countersunk holes for fixing to counter top. Graduated mm, figured centimeters bottom edge. ITEM # 35.440

LENGTH 1m

BOX QTY 1

Black Etched Dipping Tapes

The tape, accessories and winder are manufactured to conform to the specifications laid down in the Institute of Petroleum manual. The tape bears the appropriate I.P.M. reference number. The tape is manufactured from 0.25mm thick high carbon steel, hardened and tempered to a spring condition. Figures and graduations are bright against a black etched background. The tape is unvarnished. The winder has brass sides and a brass winding handle which locks the tape in position. A wood carrying handle is fitted. A stainless steel clasp secures the brass swivel hook to the tape. A knurled brass bell nut screws down to secure a weight or rule to the tape. Accessories are supplied separately to the tape. ITEM # 34.073 34.075 34.077 34.273 34.275 34.277 34.953 34.955 34.957 34.975

CONTENTS Dipping Tape Dipping Tape Dipping Tape Dipping Tape & Weight Set Dipping Tape & Weight Set Dipping Tape & Weight Set Dipping Tape Refill Dipping Tape Refill Dipping Tape Refill Dipping Tape Weight

LENGTH 10m 20m 30m 10m 20m 30m 10m 20m 30m 15cm

RULES / DIPPING TAPES

ITEM # 35.340 35.341 35.342 35.343

BOX QTY 1 1 1 1 1 1 1 1 1 1

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

11


Layout Stanley® Innovation Advantage – Durability, magnified visibility Square, level and plumb are critical to every building project. At Stanley®, we address our customer’s needs for accuracy, dependability and durability. Our new FatMax® Xtreme™ Box Beam Levels, for example, are up to 5x stronger than other Stanley® levels and are covered by a Lifetime Warranty for accuracy.

Magnified centre vial for improved visibility

12

Visit us at: www.stanleytools.com


LAYOUT TOOLS

Level Selection Guide Layout Tools NON-MAGNETIC TYPE

VIAL ACCURACY

FatMax® Xtreme™

Box Beam

FatMax®

I-Beam

450mm

MAGNETIC

600mm

900mm

0.0005 in./in.

X

X

X

Box Beam

0.0005 in./in.

X

X

X

I-Beam

0.0015 in./in.

X

X

X

X

1200mm 1800mm

600mm

1200mm

X

X

X

X

X

X

X

SPECIAL FEATURES FatMax® Xtreme™

*5x stronger than other Stanley® Levels *Solid Block Vial for accuracy *Magnified Centre Vial for enhanced visibility *Lifetime Accuracy Warranty *Machined Leveling Surfaces

FatMax®

*Machined Leveling Surfaces *Shock-absorbing end caps *Solid Block vials for maximum accuracy and durability

I-Beam

*I-Beam Construction Body *Protected Clear Vial Cover

SQUARES Carpenter Squares

Used for laying out rafters and stair stringers. Also used for checking squareness on large sheet stock or boards.

Quick Squares

Can be used as a try square, mitre square, protractor, line scriber, bevel and saw guide.

Combination Squares

Combination squares are good for marking lumber that you’ll use for ripping and crosscutting. Can also be used for transferring measurements.

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

13


LAYOUT TOOLS FatMax® Xtreme™ Box Levels

Durable box beam construction is up to 5x stronger than other Stanley® levels. Solid block acrylic vials provide best in class accuracy of 0.0005in/in. 2x stronger rare earth magnets with bi-material hand grips screwed to the frame. Dual-Machined leveling surfaces improve accuracy. Magnified centre vial for improved visibility. LIFETIME ACCURACY WARRANTY! ITEM # 43.624 43.625 Magnetic 43.636 43.648 43.648B Bonus Carry Bag 43.649 Magnetic 43.672

VIALS 3 3 3 3 3 3 5

LENGTH 600mm 600mm 900mm 1200mm 1200mm 1200mm 1800mm

BOX QTY 3 3 3 3 3 3 3

FatMax® Levels

Aluminium structure, top-read centre vial. Block vials for maximum accuracy and durability. Level accuracy of 0.0005in/in. Hang hole for easy storage. Hand hole with soft grip for comfort. Seamless one-piece extrusion for rugged use. 43-548B comes with bonus carry bag. All FatMax® levels now come with the following upgrades: Increased durability/accuracy. 6mm taller than most competitors. 6-10mm wider than other levels in its class. Heaviest in its class. Shock absorbent end caps. More durable, dual bi-material hand grips. Dual machined leveling surfaces. Improved vial view: Large bridged centre vial scribe continuous lines with an improved view.

LEVELS

Bridged Centre Vial ITEM # 43.524 43.525 Magnetic 43.536 43.548B Bonus Carry Bag 43.549 Magnetic 43.572

VIALS 3 3 3 3 3 5

LENGTH 600mm 600mm 900mm 1200mm 1200mm 1800mm

BOX QTY 6 6 3 3 3 3

I-Beam Aluminium Box Levels

Durable yet lightweight aluminium construction for all purpose use. Top read centre vial for easy readability. Yellow vial covers for high visability and easier reading vials. End caps to prevent denting. Hang hole for easy storage. Hand holes on 600mm, 900mm and 1200mm levels for easy handling. ITEM # 42.073 42.074 42.075 42.076

VIALS 3 3 3 3

LENGTH 450mm 600mm 900mm 1200mm

BOX QTY 10 10 10 10

FatMax® Xtreme™ Torpedo Level

The Stanley® FatMax® Xtreme™ Magnetic Torpedo Level is made from a die cast aluminium body that allows for maximum durability. With an innovative pipe groove, this level can be used on rounded surfaces. The holding power is superior because rare earth magnets are used on all FatMax® Xtreme™ Magnetic Levels. These magnets are twice as strong as basic magnets. Whether this Magnetic Torpedo Level is used on the job site or around the home, the magnified center vial allows for maximum visibility, and the rotating vial has been designed to duplicate angles. The FatMax® Xtreme™ Magnetic Torpedo Level is covered by Stanley’s LIFETIME ACCURACY WARRANTY! ITEM # 43.609

14

VIALS 3

Visit us at: www.stanleytools.com

LENGTH 300mm

BOX QTY 6


LAYOUT TOOLS Shock Resistant Lighted Magnetic Torpedo Level Heavy-duty aluminium frame for durability. Open top read vial for maximum readability. Rubber end caps for shock absorption. Non-marring feet. Pipe groove. Water resistant. Lighted Magnetic version. Automatic shut-off. ITEM # 43.512 Light Magnetic

VIALS 3

LENGTH 230mm

BOX QTY 6

Plastic Torpedo Levels

Top reading feature allows greater visibility. Made of tough ABS plastic. Level, plumb and 45째 vial. Base of 42-291 has magnetic strip that holds to iron and steel surfaces for hands-free operation. VIALS 3 3

LENGTH 200mm 200mm

BOX QTY 6 6

Aluminium Line Level

Lightweight, aluminium construction. Special hooks hold to line which allows level to slide freely for ease of positioning. Bottom is flat for surface leveling. 360째 vial. ITEM # 42.287

VIALS 1

LENGTH 79mm

BOX QTY 6

LEVELS / VIALS

ITEM # 42.291 Magnetic 42.294

High Visibility Plastic Line Level

High visibility plastic line level is accurate with 360째 vial. Level is lightweight yet very durable. Flat base is ideal for surface leveling. ITEM # 42.193

VIALS 1

LENGTH 76mm

BOX QTY 6

CONTENTS Spare Vials - Card of 2

BOX QTY 6

Replacement Level Vials

Pack of 2 spare level vials. To suit I-Beam levels. ITEM # 42.540C

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

15


LAYOUT TOOLS Steel Carpenter’s Square

Tempered steel designed for durability. Deep graduations for easy reading on face and back. Surface protected with a clear finish that resists rust. Reverse reading scale. Includes Rafters Tables.

ITEM # 45.530

LENGTH BODY TONGUE 600 x 50mm 400 x 38mm

GRADUATION FACE BACK 2mm 2mm

BOX QTY 6

Contractor Grade Quick Square with Arm

Heavy duty aluminium construction for durability. Black body with yellow graduations for maximum readability in all light conditions. Ideal for marking repetitive cuts accurately. Common/Jack and Hip/Valley scales. Can be used as a saw guide, bevel, or protractor. Comes with adjustable arm. ITEM # 46.053

BASE LENGTH 259mm

RULE LENGTH 174mm

BOX QTY 6

Quick Square/Pocket Square

SQUARES

Heavy duty ABS plastic body. Versatile layout tool works as a rafter square, try square, protractor, or power saw guide. Detailed instruction book included. ITEM # 46.060

BASE LENGTH 259mm

RULE LENGTH 174mm

BOX QTY 6

Cast Iron Combination Squares (Rabone)

Cast iron professional square. Can be used as a try and mitre square, depth or height gauge and spirit level. Blade etched with English/Metric or Metric only graduations in mm & cm and inch & 1/8” 1/16”. Machined on all faces for accuracy. ITEM # 46.151 46.152

OVERALL LENGTH 12”/300mm 300mm

BOX QTY 5 5

Professional Combination Square

Durable etched, hard chrome plated blades. Rust-resistant for blade longevity. 300mm square has precision machined working surfaces. Scriber for easily marking surfaces. Easy read vial. Brass hardware. High visibility yellow, die-cast handle. ITEM # 46.143

OVERALL LENGTH 300mm

BOX QTY 6

Die Cast Combination Square

Die cast metal handle has built in accuracy and durability. Coated blade resists rust. Scriber conveniently stores in handle. Level vial increases versatility. Metric and English graduations. ITEM # 46.222

16

OVERALL LENGTH 12”/300mm

Visit us at: www.stanleytools.com

BOX QTY 6


LAYOUT TOOLS Plastic Handle Combination Square

Durable plastic handle. Coated blade resists rust. Deep debossed graduations are more accurate and longer lasting. Level vial increases versatility. OVERALL LENGTH 300mm

BOX QTY 6

Solid Hardwood Sliding Bevel

Durable steel blade coated to resist rust. Select, hard rock maple wood handle. Recessed grip area. Solid brass end plates. ITEM # 46.813

BLADE LENGTH 230mm

HANDLE LENGTH 140mm

BOX QTY 6

Sliding Bevel

Tough plastic handle with handy grip. Stainless steel blade locking device. ITEM # 46.825

BLADE LENGTH 200mm

HANDLE LENGTH 140mm

BOX QTY 6

Marking Gauge

Made of tough impact styrene with metal face plate for long wear. Thumbscrew and shoe. One side graduated in 16ths of an inch and reverse side in 2mm graduations. ITEM # 46.064

OVERALL LENGTH 214mm

BOX QTY 5

SQUARES / BEVELS / MARKING GAUGE / SAW GLIDE

ITEM # 46.017

Saw Glide

Composite I-beam trusses, for making angle cuts and compound mitre cuts. ITEM # 46.068

DIMENSIONS 406 x 305mm

BOX QTY 6

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

17


LAYOUT TOOLS FatMax® Xtreme™ Chalk Line Reel

Patented ChalkView™ case so you can see the amount of chalk inside. Die cast aluminium housing for durability. 5:1 gear drive, rewinds 5x faster than a 1:1 gear drive. Clutch mechanism/quick gear release. ITEM #

CONTENTS

LENGTH

BOX QTY

47.480

FatMax® Xtreme ™ Chalk Line Reel

30m

6

47.482 3 Pc set

FatMax® Xtreme ™ Chalk Line Reel Set - Blue Chalk

30m

6

47.483 3 Pc set

FatMax® Xtreme ™ Chalk Line Reel Set - Red Chalk

30m

6

FatMax® Chalk Line Reel

3:1 gear drive for faster rewind. Holds up to a 4 oz bottle of Stanley® Chalk. Chalk line has two times the tensile strength of traditional lines and lasts twice as long. Locking button holds string in place. Water resistant case with rubber grips for comfort. Comes with spare hook.

CHALK LINE REELS

ITEM #

LENGTH

BOX QTY

47.140

FatMax® Chalk Line Reel

CONTENTS

30m

8

47.681 3 Pc set

FatMax® Chalk Line Reel 4 oz. Bottle Stanley® Blue Chalk Permanent Marker

30m

6

Metal Chalk Line Reel

Durable, heavy-duty die cast body for extra long life. Long wearing felt gasket hugs line and distributes uniform chalk coating. Universal hook has been designed to endure the rigours of everyday use. Can be used as plumb bob. ITEM # 47.099

OVERALL LENGTH 30m

BOX QTY 2

Stanley® Chalk Line Reel

Super fast rewind saves time. Tough ABS safety yellow case. Stainless steel hook designed to take on-the-job punishment. Sliding door to fill chalk reel easily. Long crank handle for better leverage. ITEM #

CONTENTS

LENGTH

47.440 47.443 3 Pc set

Stanley® Chalk Line Reel 4 oz. Bottle Stanley® Blue Chalk Plastic Line Level

BOX QTY

30m

6

30m

6

Replacement Chalk Lines

High quality replacement line, 100 ft. (30m) on reel. To suit all Stanley® Chalk Lines. (For Xtreme Chalk Lines use Item # 47.102) ITEM # 47.101

18

OVERALL LENGTH 30m

Visit us at: www.stanleytools.com

BOX QTY 6


LAYOUT TOOLS FatMax® Xtreme™ Chalk

Available in Red and Black, 8oz or 5lb bulk. Waterproof chalk snaps longer lasting lines on wet surfaces. Uses 75% less chalk waste than standard Stanley® chalk and eliminates chalk clumping in a wet environment. ITEM # 47.821 47.822 47.827 47.828

SIZE 8oz/227g 8oz/227g 5lb/2.27kg 5lb/2.27kg

COLOUR Red Black Red Black

BOX QTY 12 12 4 4

Stanley® Chalk Refills

ITEM # 47.403 47.803

SIZE 4oz/113g 8oz/227g

COLOUR Blue Blue

BOX QTY 12 12

FatMax® Xtreme™ Permanent Markers Available in Fine and Chisel Tip. Durable Chisel Tip – Writes Fine and Wide Lines. Quick drying water resistant ink marks on almost any surface (oily and wet). Non slip barrel for easy gripping. ITEM # DESCRIPTION 47.312 FatMax® Xtreme™ Marker 2pk 47.314 FatMax® Xtreme™ Marker 2pk

TIP STYLE COLOUR Fine Tip Black Chisel Tip Black

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

BOX QTY 12 12

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

CHALK / PERMANENT MARKERS

High grade non permanent chalk. Packed in plastic canisters with easypouring spout. Plastic bottle twist-to-open cap.

19


Electronic Layout Stanley® Innovation Advantage – Intuitive operation and ease of use! At Stanley®, we focus on technology, and we’ve created a line of “intelligent” tools that make projects easier. Our lasers, stud sensors and measuring devices have patented LCD screen graphics, alignment guides, variable reading depths and more – all organised for intuitive operation and ease-of-use. They’re a smart choice for the home or the job site.

20

Visit us at: www.stanleytools.com


ELECTRONIC RL350GL Dual Beam Self Leveling Rotary Laser

Strong and durable enough for the most demanding construction projects, and with super fast electronic self leveling and anti drift features to ensure accurate leveling without costly rework. Protective glass housing eliminates contaminates such as dust particles, debris and water. Includes: Level, remote control, wall mount, bracket, magnetic target plate, laser glasses, manual, battery charger and tough site carrying case.

Working Range

Up to 90m diameter, interior Up to 600m diameter, exterior with detector (optional)

Working Environment

Built for all-weather outside and interior layout jobs

Leveling Accuracy

Level and Horizontal +/- 1.5mm @ 30m Plumb and Vertical +/- 6mm @ 30m

Leveling Type

Electronic, servo assist, self leveling

Laser Diode

635Nm Diode

Laser Class

Class 2M

Batteries

NiHM. Will run from transformer source.

Build Standard

IP54 (dust and water resistant)

Operating Temperature Range

-6˚ Celsius to +49˚ Celsius

ITEM # 77.227 77.227B

MODEL RL350GL RL350GL Site Kit*

*Also includes: 5 Metre grade rod, detector & tripod

RL250GL Self Leveling Rotary Laser (exterior)

Super rapid & accurate self leveling plus rugged construction, the RL-250GL with horizontal leveling has the same accuracy specification and features as the RL-350GL plus the rotating head can be set to grade, allowing the user to peg out inclines and slopes. Includes: Level, receiver and rod holder, battery charger, manual and tough site carrying case.

ROTARY LASER LEVELS

TECHNICAL SPECIFICATION

TECHNICAL SPECIFICATION Working Range

Up to 600m diameter (with detector)

Working Environment

Built for all-weather outside jobs

Leveling Accuracy

Level and Horizontal +/- 1.5mm @ 30m

Leveling Type

Electronic, servo assist, self leveling

Laser Diode

650Nm Diode

Laser Class

Class 2M

Batteries

NiHM.

Build Standard

IP54 (dust and water resistant)

Operating Temperature Range

-6˚ Celsius to +49˚ Celsius

ITEM # 77.229 77.229B

MODEL RL250GL RL250GL Site Kit*

*Also includes: 5 metre grade rod, detector & tripod

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

21


ELECTRONIC RL100 Manual Rotary Laser Leveling System

One person, one button leveling, plumbing, and alignment. Two speed rotation (150-600 RPM) plus spot mode, short and long sweep modes, and LED low battery indication. Protected level vials prevent damage and shield vials from the sun to prevent misreads. Remote control operation up to 30m away. Includes: Level and trivet, remote control, wall-mounted bracket, magnetic target plate, laser glasses, manual, batteries and sturdy carrying case.

ROTARY LASER LEVEL / OPTICAL LEVEL

TECHNICAL SPECIFICATION Working Range

Up to 60m diameter, interior Up to 244m diameter, exterior with detector

Working Environment

Built for all-weather general work

Leveling Accuracy

Level and Plumb +/- 6mm @ 30m

Leveling Type

Manual with 2 adjusting screws

Vial Sensitivity

Level/Horizontal 5 minutes of arc Plumb/Vertical 10 minutes of arc

Laser Diode

635Nm

Laser Class

Class 2M

Batteries

4 “C” Alkaline batteries (included)

Build Standard

IP54 (dust and water resistant)

Operating Temperature Range

-6˚ Celsius to +49˚ Celsius

ITEM # 77.156

MODEL RL100

AL24 DVP Automatic Optical Level Kit

High quality, competitively priced 24x automatic optical level, supplied with Tripod and Rod, with many features normally seen on a more expensive product. Protective glass housing eliminates contaminates such as dust particles, debris and water. Includes: Level, plumb bob, lens cover, allen wrench and adjusting pin, manual and hard protective carry case plus TP-1 tripod and measuring rod.

TECHNICAL SPECIFICATION Working Range

90m

Working Environment

Built for all-weather general work

Leveling Accuracy

2mm for 1km double run leveling 1.6mm @ 50m

Leveling Type

3 screw setting. Viewed through angular prism. Automatic compensator +/- 2˚

Angular Accuracy

1˚ (DVP) / 1 Gon (GVP)

Compensator

Magnetically dampened wire hung type

Compensator setting accuracy

+/- 0, 8”

Compensator working range

+/- 15 minutes

Vial Sensitivity

2mm

Clear Objective Aperture 36mm Resolution

9cm

Build Standard

IP54 (dust and water resistant)

Operating Temperature Range

-6˚ Celsius to +49˚ Celsius

ITEM # 77.159

22

MODEL AL24DVP

Visit us at: www.stanleytools.com


ELECTRONIC CL2 Twin Beam Self Leveling Cross Line Laser

Level and plumb from floor to ceiling with this self-leveling laser cross level. Projects bright, self-leveling level and plumb laser “chalk lines” for instant, accurate reference marks. This Laser is a precise alignment tool which projects a vertical (plumb) line and/or a horizontal (level) line at the press of a button. Tough rubber housing - comfort & site tough ruggedness. Includes: Level, nylon carrying pouch, manual & batteries

Working Range

Up to 9m interior visible range

Working Environment

Interior use

Leveling Accuracy

Level and Plumb +/- 4mm @ 9m

Line Accuracy

+/- 2.5mm @ 3m (End to end)

Leveling Type

Pendulum Self Leveling, +/- 5˚

Laser Diode

650Nm

Laser Class

Class 2M

Batteries

3 “AA” Alkaline batteries (included)

ITEM # 77.153

MODEL CL2

CL90 Twin Beam Self Leveling Cross Line Laser

The CL90 features a heavy-duty, magnetically dampened compensator to self-level fast! “Out of leveling range” sensor triggers beams to automatically shut off when unit is moved out of its broad ±5° self-leveling range. The CL90 features two output windows. One projects horizontal (level) and vertical (plumb) lines together, or separately; two separate laser diodes produce bright and sharp laser reference lines. The second projects a 90°/plumb line reference. Includes: Laser pole and adjusting bracket, nylon carry case, manual & batteries.

TECHNICAL SPECIFICATION Working Range

Up to 9m interior visible range

Working Environment

Interior use

Leveling Accuracy

Level & Plumb +/- 3mm @ 9m

Line Accuracy

+/- 2mm @ 3m (End to end)

Leveling Type

Pendulum Self Leveling, +/- 5˚

Laser Diode

635Nm

Laser Class

Class 2M

Batteries

3 “AA” Alkaline batteries (included)

ITEM # 77.155

CROSS LINE LASER LEVELS

TECHNICAL SPECIFICATION

MODEL CL90

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

23


ELECTRONIC PB2 Self Leveling Laser Plumb Bob

Unique magnetically dampened self-leveling system settles plumb bob up to 20 times faster than conventional methods. Combines traditional plumb bob ease-of-use with laser-accurate alignment. One button - transfer point from floor to ceiling. Magnetic Fastening: PB-2 is designed with magnets for attaching to steel objects, such as studs. This allows for a secure hold whilst taking measurements. Includes: Laser level, case, manual & batteries

TECHNICAL SPECIFICATION Working Range

30m - subject to illumination

Level Speed

< 3 seconds

Line Accuracy

Up: 3.175mm (1/8”) at 15m (50ft) Down: 6.35mm (1/4”) at 15m (50ft)

Leveling Type

Self leveling magnetically dampened, +/- 5˚

Laser Diode

635Nm

Laser Class

Class 3R

Batteries

3 “AA” Batteries (not included)

DOT BEAM LASERS

ITEM # 77.189

MODEL PB2

SP5 5-Beam Self Leveling Laser

5 Independent self leveling chalk points - rapid and accurate layout of many applications & maximum beam visibility. Magnetically dampened self leveling mechanism - rapid and accurate Self leveling. Automatic “Out-of-Level” detection which avoids costly errors. Tough rubber housing - Job-Site tough. Includes: Multi beam level, magnetic wall & tripod mount, trivet, pipe mounting strap & carrying case, manual & batteries.

TECHNICAL SPECIFICATION Working Range

Up to 30m interior visible range

Working Environment

Designed for interior use

Leveling Accuracy

Level & Plumb +/- 6mm @ 30m

Leveling Type

Pendulum self leveling, +/- 5˚

Laser Diode

5x 635Nm laser diodes, set into pendulum cluster

Laser Class

Class 2M

Batteries

3 “AA” Batteries (included)

ITEM # 77.154

24

MODEL SP5

Visit us at: www.stanleytools.com


ELECTRONIC SP2 Torpedo Dot Laser With Chalkline & Mount

Designed for the homeowner-built for the pro, this multi-use laser tool generates a laser chalkline or red dot for horizontal or vertical jobs. The 360˚ base may be mounted to a wall, the floor or studs with retractable anchor pins, or used with magnets for ferrous metal surfaces. Precise level vial and bright diode. Includes: Level, laser chalk line, 3600 mount, manual & batteries.

Working Range

Up to 30m interior visible range

Working Environment

Designed for interior use

Leveling Accuracy

Level/Horizontal +/- 6mm @ 15m Plumb/Vertical +/- 6mm @ 6m

Line Accuracy

+/- 10mm @ 9m

Leveling Type

Manual, with base adjusting screw

Laser Diode

650Nm

Laser Class

Class 2M

Batteries

3 “AA” Alkaline (included)

ITEM # 77.152

MODEL SP2

S2 Laser Level & Square

Projects horizontal and vertical laser “chalklines” on surfaces. Great for floors, tiles, paneling, wall fixtures, wallpapering, stenciling, partitions and much more! Alignment guide for 90˚ layout - calculate and turn angles in 5˚ increments. Retractable push button mounting feet for using with adhesive putty, mount laser to wall.

TECHNICAL SPECIFICATION Working Range

15m (50ft)

Working Environment

Designed for interior use

Line Accuracy

13mm (1/2”) at 9m (30ft)

Laser Diode

Dual 635-650nm

Laser Class

Class 3R

Batteries

3 “AA” Batteries (included)

ITEM # 77.188

MODEL S2

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

TORPEDO DOT LEVEL / LASER LEVEL & SQUARE

TECHNICAL SPECIFICATION

25


ELECTRONIC Measuring Wheel

Durable traditional counter measuring wheel for best value. Gear driven counter with tough plastic housing, 5 digit counter with manual reset button, Heavy duty meta folding handle & rubber hand grip, folding wheel mount, diecast aluminium wheel, wear resistant rubber tread and folding kick stand. Includes: Measuring wheel, manual and carry bag.

TECHNICAL SPECIFICATION Working Range

9999.99m

Wheel Diameter

318mm (12.5”)

Working Environment

Built for external use, larger wheel for rougher ground

Working Accuracy

+/- 1% typically

Units of Measurement

Metres and Centimeter’s

Wheel Mount

Folding wheel mount included

Build Standard

Diecast wheels, HD rubber tyres for durability. Tough counter moulding for strength.

MEASURING WHEEL

ITEM # 77.174

MODEL MW-40M

Laser Accessories ITEM #

MODEL

77.162 AR-52 77.163 TP1 77.164 TPE1 77.165 TM-1 77.168 LGA1 77.169 RLR4 77.170 GT-1

DESCRIPTION

5 Metre Grade Rod, Aluminium Standard Tripod, Aluminium Extending Tripod, Aluminium Tripod Mount Adaptor Laser Grade Adaptor Laser Detector, Dual LCD Display Grid Target

77.171 GL-1

Laser Glasses, Red Wallmount and Tripod 77.172 TPVM Adaptor Rod Carry Case 77.173 ARCC (also use with 77.162) 77.191 58MNT Tripod Thread Adaptor

26

SP2

SP1X

SP5

CL2

CL90

RL100

RL350GR

RL250GR

AL24DVP

X

X

X

X

X +TM-1

X

X +58-TAP

X

X

X

X

X +TM-1

X

X

X

X

X

X

X

X

X X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

77.202

Battery Charger

X

X

77.203

Replacement Battery

X

X

77.204

Battery Clip

X

X

Visit us at: www.stanleytools.com

X

X


ELECTRONIC IntelliLaser® Pro Laser Line Level/Stud Finder Leveling, layout and stud locating on vertical and horizontal surfaces. Wood, metal and live wire detection. Multi-read depths: 12mm (1/2”), 25mm (1”) and 38mm (1-1/2”). Vertical and horizontal mounting holes Spring loaded pivoting laser mechanism with 45˚ locking detents. 7 metre laser projection and 90˚ squaring. 9 volt battery powered. ITEM # 77.500

BOX QTY 2

FatMax® 400 Stud Sensor

ITEM # 77.730

INTELLITOOLS

Large Patented LCD screen for visual detection warning. Quick response ASIC technology. Detects wood or metal studs. Continuous Live Wire detection. Multi-read depths: 12mm (1/2”), 25mm (1”) and 38mm (1-1/2”). Soft touch felt strips provide surface protection. Audible sound when locating studs - speaker coincides with LCD to ensure stud object is recognised. BOX QTY 2

IntelliSensor® Pro Stud Sensor

Large Patented LCD screen for visual detection warning. Quick response ASIC technology. Continuous Live Wire detection. Multi-read depths: 12mm (1/2”), 25mm (1”) and 38mm (1-1/2”). Soft touch felt strips provide surface protection. Audible sound when locating studs - speaker coincides with LCD to ensure stud object is recognised.

ITEM # 77.720

BOX QTY 2

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

27


ELECTRONIC IntelliSensor® Stud Sensor

New ergonomic styling. Quick response ASIC technology. Detects and locates studs and joists up to 19mm (3/4”) in depth. Soft touch felt strips provide surface protection and 30% smaller “micro” size for pocket portability and storage. High impact ABS housing for strength and durability. Audible sound when locating studs. Speaker coincides with LED to ensure stud object is recognised. ITEM # 77.110

BOX QTY 6

INTELLITOOLS

IntelliMeasure® Distance Estimator

28

Large easy-to-read LCD screen with last three measurements always displayed. One person measuring up to 13m. Accuracy +/-0.5%. Toggle button for calculating length, area and volume. Manual addition. Mode for unique applications (i.e. Perimeter calc.) ITEM # 77.018

BOX QTY 2

Visit us at: www.stanleytools.com


Knives & Blades

Stanley® Innovation Advantage – Tool Free Blade Change and Interlocking Nose

Stanley’s new breed of knives all feature tool free blade change for speed and ease of use. Patented interlocking nose design secures blade safely between knife halves.

Stanley® blades start and stay sharper than any other heavy-duty blades.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

29


KNIVES

Knives Selection Guide Retractable Blade Knives Regular Knife No.

Heavy Duty

Rounded

Hook

Concave

0.11.911

11.911A

0.11.921

11.921A

2.11.921

11.988

11.835

0.11.952

10.099 Classic 99

X

X

X

X

X

X

X

X

10.179 Metal Green

X

X

X

X

X

X

X

X

10.189C Safety

X

X

X

X

X

X

X

X

10.779 Dynagrip

X

X

X

X

X

X

X

X

10.788 Quick Change

X

X

X

X

X

X

X

X

10.777 FatMax®

X

X

X

X

X

X

X

X

10.815 FatMax® XtremeTM

X

X

X

X

X

X

X

X

10.209 Classic 199

X

X

X

X

X

X

X

X

10.299 Interlock 299

X

X

X

X

X

X

X

X

10.816 FatMax® XtremeTM

X

X

X

X

X

X

X

X

Special Purpose

Snap 11.325

11.301

11.300

11.040

Fixed Blade Knives

Snap Blade Knives X

10.143P Light Duty 18mm

X

10.150 Snap Blade 9mm 10.151 Snap Blade 18mm

X

10.418 Dynagrip 18mm

X

10.280 Self Locking 18mm

X

10.480 Dynagrip Auto Load 18mm

X X

10.411 FatMax® 9mm

X

10.421 FatMax® 18mm 10.817 FatMax® XtremeTM 25mm

X

Special Purpose Knives 10.049 Folding Pocket Knife

30

X

Visit us at: www.stanleytools.com


KNIVES FatMax® Xtreme™ Retractable Utility Knife

Die cast all metal construction stands up to the most extreme job site conditions. Ergonomically shaped handle for comfort. Large knurled dial locks blade firmly in place. Diamond shaped texturing provides a sure grip. Magnetic nose holds blade while it is being changed. Comes with 15 heavy duty blades. ITEM # 10.815

HANDLE LENGTH 197mm

BOX QTY 6

FatMax® Locking Retractable Utility Knife

ITEM # 10.777

HANDLE LENGTH 178mm

BOX QTY 6

Quick Change Knife

Push button blade change – no tools required. Strong durable construction. Cast metal core and bi-material soft panels for better grip. Large hang hole for pegboard storage. Swing out blade storage for easy blade access (furnished with three 11.921 Heavy Duty utility blades). Curved handle design for comfort, control and balance. Integrated string cutting feature. ITEM # 10.788

HANDLE LENGTH 165mm

BOX QTY 6

RETRACTABLE KNIVES

Adjustable thumb dial locking wheel helps keep blade in place and helps reduce blade shifting in aggressive cutting situations. One-piece design allows blade change without disassembling knife – no tools required. Blade presents itself for easy access. Convenient rear blade storage houses seven heavy duty blades. Lightweight design helps reduce fatigue during prolonged use. Ergonomically designed rubber grip fits easily in your hand. Durable body design helps increase life. Comes with 3 blades.

Dynagrip Retractable Utility Knife

Cushion grip surface for comfort. Slip resistant grip even with gloved hands. Patented Interlocking nose to secure blade. Resistant to slipping even on an angled surface. Furnished with three 11.921 Heavy Duty utility blades. ITEM # 10.779

HANDLE LENGTH 144mm

BOX QTY 6

Safety Utility Knife

Spring-loaded blade retracts into knife automatically when pressure on slide button is released. Knife can not be left or put in a pocket with the blade exposed. Interlocking nose secures blade safely between knife halves. Safety-red colour for high visibility. Furnished with one 11.987 Round Point utility blade. ITEM # 10.189C

HANDLE LENGTH 144mm

BOX QTY 6

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

31


KNIVES Classic 99 Retractable Utility Knife

Interlocking nose to hold blade securely. Multi-position blade slide. Blade storage in handle. Furnished with three 11.921 Heavy Duty utility blades. 10.099B is packed in bulk and is uncarded. ITEM # 10.099 10.099B

handle LENGTH 152mm 152mm

BOX QTY 6 96*

* Only available in box quantities.

RETRACTABLE / FIXED BLADE KNIVES

Retractable Utility Knife (Hi-viz Green)

Heavy duty metal body. Interlock® system secures blade safely and high visibility green colour aids recognition. ITEM # 10.179

HANDLE LENGTH 152mm

BOX QTY 6

FatMax® Xtreme™ Fixed Utility Knife

Die cast all metal construction stands up to the most extreme job site conditions. Ergonomically shaped handle for comfort. Large knurled dial locks blade firmly in place. Diamond shaped texturing provides a sure grip. Magnetic nose holds blade while it is being changed. ITEM # 10.816

HANDLE LENGTH 197mm

BOX QTY 6

Classic 199® Fixed Blade Utility Knife

Positive fixed blade retention for heavy-duty cutting. Extra heavy duty cast metal textured handle designed for long life and tough use. Furnished with three 11.921 Heavy Duty blades. ITEM # 10.209

HANDLE LENGTH 140mm

BOX QTY 6

299® Fixed Blade Utility Knife

Patented interlocking nose for safety. Contoured handle with slip-resistant grip. Blade storage in handle. Extra heavy duty cast metal handle. Furnished with one 11.921 utility blade. ITEM # 10.299

32

HANDLE LENGTH 140mm

Visit us at: www.stanleytools.com

BOX QTY 6


KNIVES FatMax® Xtreme™ Snap Blade Knife - 25mm

Auto loading blade cartridge - fast and effortless blade changing. Sleek design for ease and control. Cast Metal Body for strength and durability. Auto-Locking blade slide. Built-in blade snapper. ITEM # 10.817

BLADE SIZE 25mm

HANDLE LENGTH 210mm

BOX QTY 6

FatMax® Snap Blade Knife - 9mm, 18mm

Auto loading blade cartridge - fast and effortless blade changing. Sleek design for ease and control. Cast Metal Body for Strength and Durability. Auto-Locking blade slide. Built-in blade snapper. BLADE SIZE 18mm 9mm

HANDLE LENGTH 160mm 135mm

BOX QTY 6 6

Dynagrip® 18mm Snap Blade Cartridge Knife

Features a blade cartridge which rapidly and automatically slides a new blade into position after old blade is removed. Cartridge dispenser is made from stainless steel to resist rust. Ergonomically designed for comfort and cutting power. The smooth slider mechanism features an audible “click stop” and is self locking for security. Strong and durable tri-material construction. Featuring soft-grip panels for secure grip. Hang hole for storage and lanyard. Supplied with four 11.301 Heavy Duty blades (equals 32 points).

ITEM # 10.480

HANDLE LENGTH 170mm

BOX QTY 6

SNAP BLADE KNIVES

ITEM # 10.421 10.411

18mm Self Locking Snap Blade Knife

Up to 2 blade capacity. Positive “Click” action slider. Automatic blade locking. Retractable cutter with quick-point snap-off blades.

ITEM # 10.280

HANDLE LENGTH 165mm

BOX QTY 12

Dynagrip® 18mm Snap Blade Knife

Comfortable knife for general purpose use. Blade snapped in end cap. Bi-material handle for comfort in use. Positive “Click” action slider. ITEM # 10.418

HANDLE LENGTH 135mm

BOX QTY 12

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

33


KNIVES 9mm & 18mm Snap Blade Knives

Retractable knife with Quick-Point snap-off blades. For light duty use cutting and trimming. Blade sections snap-off providing the user with fresh, sharp cutting points. Removable blade snapper included in cap of knife. Impact resistant ABS plastic body. Secure multi position slide button. Supplied with one Quick-Point blade. Pocket clip provided on 10.150 9mm Snap-Off Knife. ITEM # 10.150 (9mm) 10.151 (18mm)

handle LENGTH 130mm 160mm

BOX QTY 6 6

18mm Light Duty Snap Blade Knife

SNAP BLADE / SPORTS KNIVES

Retractable cutter with quick-point snap-off blades. For light duty cutting and trimming. Blade sections snaps off providing user with a fresh, sharp cutting point. Supplied with one blade. ITEM # 10.143P

HANDLE LENGTH 152mm

BOX QTY 30

Sports Utility Outdoorsman Knife

Multi-functional combination knife with a retractable utility blade. Designed for recreational purposes or on the job site. 3-1/2” blade made of Stainless Steel for durability and rust resistance. Serrated edged, sport blade provides cutting leverage and cuts deeper than a standard utility blade. Patented interlocking nose helps prevent knife halves from spreading during use. Cast metal body for strength and durability. Rubber panels for a secure, comfortable grip. Quick release spring for easy one-handed closing. 3-position retractable utility blade works like a traditional utility knife. Only one blade can open at a time. Push button quick blade change – no tools required. Comes with a 10-blade dispenser and Belt Holster/Pouch. ITEM # 10.804

HANDLE LENGTH 178mm

BOX QTY 6

Quick Slide Sport Pocket Knife

Cast Zinc Body for Durability and Strength. 3” / 75mm stainless steel serrated sport blade. Rust proof and ideal for cutting String, nylon, rope. Standard utility blade, multi-purpose cutting. No tools utility blade change, easy to replace blades, thumb grip. Easy to open sports blade one handed. Spine lock - lock and release the sports blade for safety. Interlock mechanism, only allows 1 blade NOT both to be exposed at a time. Thumb slider for easy operation of utility blade. Pocket clip for convenience and security. Pouch supplied for easy storage. ITEM # 10.813

HANDLE LENGTH 128mm

BOX QTY 6

Quick Slide Pocket Knife

“No Tools” required for blade change. Innovative sliding blade for true one handed operation. Accepts all standard utility and hook blades. All metal construction. One-piece belt clip. ITEM # 10.810

34

HANDLE LENGTH 96mm

Visit us at: www.stanleytools.com

BOX QTY 6


KNIVES Folding Pocket Knife

Epoxy powder coated metal handle. Safety blade lock. Replacement stainless steel blade. Blade rotates easily into handle for safe storage. ITEM # 10.049

HANDLE LENGTH 105mm

BOX QTY 6

Disposable Craft Knife

Polypropylene plastic handle. Blade permanently attached. Supplied with blade guard. HANDLE LENGTH 140mm

BOX QTY 50

FOLDING POCKET / CRAFT KNIFE

ITEM # 10.601RB* * Only available in box quantities.

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

35


KNIVES 1992 Heavy Duty Utility Blade

For general purpose cutting. Precision-honed edge for consistent and extended cutting life. Fits most standard utility knives. ITEM # 0.11.921 2.11.921 11.921A

PACKED 5/Card 10/Dispenser 100/Dispenser

Length 62mm 62mm 62mm

THICKNESS .61mm .61mm .61mm

BOX QTY 10 6 10

1991 Regular Duty Knife Blade

KNIFE BLADES

Regular Duty utility blade for light sheet materials, paper and cardboard. ITEM # 0.11.911 11.911A

PACKED 5/Card 100/Dispenser

length 51mm 51mm

THICKNESS .43mm .43mm

BOX QTY 10 6

5192 Concave Knife Blade Ideally shaped for precise cutting out. ITEM # 0.11.952

PACKED 5/Card

SIZE 26mm

BOX QTY 10

Round Point Safety Knife Blade

Reduces risk of accidental cuts and reduces damage to interior contents when cutting open cartons. ITEM # 11.988

36

PACKED 100/Dispenser

LENGTH 59mm

Visit us at: www.stanleytools.com

THICKNESS .55mm

BOX QTY 6


KNIVES 25mm Heavy Duty Snap Blade

Replacement blade for the FatMax® Xtreme™ Snap Knife. 7 Cutting Points. ITEM # 11.325

PACKED 10pk/Dispenser

Length 125mm

THICKNESS .69mm

BOX QTY 10

18mm Snap Blade

Replacement blade with 8 cutting points. Fits all 18mm snap-off knives.

PACKED 10pk/Dispenser

Length 108mm

THICKNESS .51mm

BOX QTY 10

9mm Snap Blade

Replacement blade with 13 cutting points. Fits Stanley® 10.421 and 10.150 snap-off knives. ITEM # 11.300

PACKED 10/Card

length 89mm

THICKNESS .43mm

BOX QTY 10

Pocket Knife Blade

KNIFE BLADES / SCRAPER

ITEM # 11.301

Sheepfoot style blade made of cutlery grade stainless steel. For heavy cutting and carving. Replacement blade for 10.049 Pocket Knife. ITEM # 11.040

PACKED 1/Card

length 65mm

THICKNESS 1.02mm

BOX QTY 10

Window Scraper

Ideal for scraping paint from windows, mirrors, tiles and other flat surfaces. Furnished with one 11.921 utility blade. ITEM # 28.593

length 178mm

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

BOX QTY 4

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

37


Saws Stanley® Innovation Advantage – SharpTooth™ and BladeArmor™ Coating The FatMax® Saw with BladeArmor™ Coating is one fast-cutting tool. Each tooth has three cutting surfaces instead of two to rip through wood or plastic 50% faster than other Stanley® saws. Protected with BladeArmor™ Coating, the saw blade resists both rust and abrasion and has a dramatic reduction in friction.

Three cutting surfaces instead of two

38

Visit us at: www.stanleytools.com


SAWS FatMax® Handsaws With Blade Armor™ Coating

Blade Armor™ is a composite coating that protects the blade: 2x more rust protection, 6x more abrasion protection, 50% less friction. (Compared to Stanley® lacquered saws.) 15% thicker blade for straighter cuts and to reduce binding. SharpTooth™ saw technology, utilises three cutting surfaces and cuts 50% faster than conventional Stanley® handsaws. Induction hardened teeth stay sharp 3 to 5 times longer than standard teeth. Approximately 60% thicker handle for grip and comfort. Back of saw can be used to mark 45° and 90° angles. Ergonomically designed slip-resistant grip for extended use.

ITEM # 20.046 20.047

POINTS PER INCH 8 8

BLADE LENGTH 380mm 508mm

BOX QTY 4 4

JetCut Handsaws

Usage: Less than 6 teeth per inch – Heavy sawing down the grain, 7 to 9 teeth per inch – General purpose sawing, Over 10 teeth per inch – Fine and accurate joints. ITEM # 20.222 15.281 15.288 15.599 15.289

POINTS PER INCH 9 8 8 12 8

BLADE LENGTH 355mm 380mm 508mm 508mm 550mm

BOX QTY 4 6 6 6 6

HAND SAWS

Stanley® JetCut saws have extremely aggressive tooth geometry for remarkably fast cutting. JetCut teeth have three precision ground bevelled cutting edges for extra fast sawing. 20% - 50% faster, particularly on pine and man made materials such as chip board. Variable set and third cutting angle on tip of tooth give easier sawing with better kerf clearance and a smooth cut. High frequency, induction hardening gives teeth extra long life (No sharpening needed). ABS handle has 45° and 90° marking out features.

Heavy Duty Handsaws

Induction hardened teeth stay sharp 3 to 5 times longer than standard teeth. Special square and mitre feature built into saw handle enables user to draw 45° and 90° lines using the back of the blade. Contoured sturdy handle designed for comfort and control. Protective full-length sleeve. ITEM # 20.087 20.088

POINTS PER INCH 8 8

BLADE LENGTH 508mm 660mm

BOX QTY 6 6

General Purpose Handsaw

Bi-Material Handle for safety and comfort. Hardened three point teeth for longevity and fast cutting. Blade made from Japanese steel. Handle measures 45° and 90° angles. ITEM # 20.074

POINTS PER INCH 7

BLADE LENGTH 508mm

BOX QTY 6

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

39


SAWS FatMax® Backsaw

Designed for precise cutting including: dovetails, miters and tenons. Increased performance: Premium S2 Steel Blade provides greater tensile strength for longer life. Induction heat-treated triple ground blade for increased cutting performance. Heavy Duty Design: (2) Heavy Duty Screws for Secure Blade to Handle Assembly. Solid, one piece bi-material (ABS) Handle delivers increased durability and comfort ITEM # 17.202

POINTS PER INCH 11

BLADE LENGTH 355mm

BOX QTY 4

HardToothTM Backsaw

BACK SAWS / SPECIALTY SAWS

Hard-toothed blade outlasts ordinary blades. Blade cannot be re-sharpened. Strong steel back support keeps blade rigid ensuring accurate cuts. Comfortable black non-slip plastic handle. Protective blade sleeve. ITEM # 15.352

POINTS PER INCH 13

BLADE LENGTH 350mm

BOX QTY 4

FatMax® Flooring Saw (Fine Cut)

Designed for cutting laminate, veneer and wood flooring “teeth on curved top section facilitate cutting of slots or grooves through the middle of a surface”. Increased performance: Premium S2 Steel Blade provides greater tensile strength for longer life. Heavy Duty Design: (2) Heavy Duty Screws for Secure Blade to Handle Assembly. Solid, one piece bi-material (ABS) Handle delivers increased durability and comfort. ITEM # 17.204

POINTS PER INCH 13

BLADE LENGTH 300mm

BOX QTY 4

FatMax® PVC Saw

Designed for cutting plastic PVC pipe, ideal for electricians and plumbers. Increased performance: Premium S2 Steel Blade provides greater tensile strength for longer life. Induction heat-treated triple ground blade for increased cutting performance. Heavy Duty Design: (2) Heavy Duty Screws for Secure Blade to Handle Assembly. Solid, one piece bi-material (ABS) Handle delivers increased durability and comfort. ITEM # 17.206

POINTS PER INCH 11

BLADE LENGTH 300mm

BOX QTY 4

FatMax® Jabsaw

The FatMax® Jabsaw’s SharpTooth™ technology can cut 50% faster than traditional tooth designs. Cuts on both push and pull strokes. The sharpened tip can easily cut punches through drywall. For durability, the blades are hardened and tempered. Cuts through wood, plastic and drywall. Slip-resistant comfort grip. Handle structure designed for strength and durability. ITEM # 20.556

40

BLADE LENGTH 152mm

Visit us at: www.stanleytools.com

BOX QTY 6


SAWS Contractor Grade Wallboard Saw

Ergonomically designed curved handle is cushioned for comfort and extended use. Fully hardened, tempered blade is designed to cut fast and prevent clogging. Sharp tip for plunge cuts. Blade is epoxybonded to handle for a secure fit and long life. ITEM # 15.556

BLADE LENGTH 152mm

BOX QTY 6

Multi Cut 4-Way Keyhole Saw

4-Way blade positioning cuts curves, circles and frets into places where an ordinary hacksaw cannot reach. Cuts wood, nails, metal, composite board, BX cable, conduit, etc. Lightweight, pistol grip handle fits hand comfortably. Complete with one wood cutting blade and one metal cutting blade. BOX QTY 4

SPECIALTY SAWS

ITEM # 15.275

Coping Saw

Finest pro quality. Rich, hardwood handle. Blade is highest grade high carbon steel – hardened and tempered to give clean, controllable cutting action. ITEM # 15.104A

FRAME LENGTH 160mm

FRAME DEPTH 120mm

BOX QTY 6

Coping Saw Blades

Stanley’s state-of-the-art manufacturing processes produce strong, yet flexible coping saw blades that simply last longer. ITEM # 15.061 (card of 4)

SIZE PER PITCH 163mm x 15TPI

BOX QTY 6

*Extra narrow blade for sharp surrounding cuts.

Mitre Box

Uniquely designed honeycomb base and cam shaped pins secure work for accurate cuts. Hassle free - just twist cam pins to securely hold material to base while cutting. Cuts mitres on 45° and 90°, face angle 45°, and all new 22-1/2° angle (for octagonal shapes) popularly used on architectural details such as bay windows. Moulded-in storage compartments to hold cam pins and pencil. Base and pins are moulded of high impact resistant material for long life. Comes with mitre box and two cam pins. Moulded lip on base edge for easy use without mounting. Two screw holes on each side to secure base to work top. Built in saw stop prevents cutting into mitre box. Patented design. ITEM # 20.112 20.600

Mitre Box Only Mitre Box Plus 250mm Saw

BOX QTY 1 1

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

41


SAWS FatMax® High Tension Hacksaw

One piece durable body for prolonged life, allowing for extra high tension. Tension: 330 lb. (150kg). Quick and easy blade change with pre-tensioning. Comes with a bi-metal blade 24 TPI. Power load sliding tension, gives extra leverage to help increase tension and better control when releasing the blade. Thumb-dial adjustable tension mechanism with quick change features allows for tension memory, no resetting after each blade change. Ergonomically designed contoured handle and front thumb grip to give better control. Large cutting capacity – up to 125mm of extra deep cutting. ITEM # 20.531

FRAME LENGTH 305mm

BOX QTY 2

Tubular Frame Professional Hacksaw

Strong, well balanced design for the professional user. Deep cutting, tubular steel frame with excellent strength to weight ratio, flush cut design, essential for cutting materials which are positioned close to any surface, enclosed, comfortable, non-slip handle for safety.

HACKSAWS

ITEM # 15.150

FRAME LENGTH 305mm

BOX QTY 6

Stanley® Box Hacksaw

Aluminium handle with rubber grip for greater grip for greater comfort and better control. Positive locking mechanism – 300mm blades and two blade positions: 90°/45° ITEM # 15.166

FRAME LENGTH 305mm

BOX QTY 6

Mini Hacksaw

Ergonomic grip with thumb rest for maximum comfort. Blade top in handle to eliminate cutting hazard to hand. Structural design utilising high impact polymer coating for maximum strength and durability.

ITEM # 20.807

OVERALL LENGTH 254mm

BOX QTY 6

Junior Hacksaw

General purpose, lightweight hacksaw for cutting nails and bolts. Good for modelling.

ITEM # 20.405

42

OVERALL LENGTH 350mm

Visit us at: www.stanleytools.com

BOX QTY 6


SAWS Junior Hacksaw Blades To suit 20.405. Card of 5. ITEM # 15.905

OVERALL LENGTH 160mm

BOX QTY 6

High Speed Steel Hacksaw Blades

High speed steel blades cut most metals including unhardened tool steel and stainless steel.

TEETH PER INCH 32 TPI 24 TPI 18 TPI

BLADE LENGTH 305mm 305mm 305mm

BOX QTY 10 10 10

High Speed Steel Flexible Hacksaw Blades

High speed flexible blades are the right choice for tradesmen and homeowners. The high speed steel teeth will outlast low alloy flexible blades many times.

ITEM # 15.829 15.830 15.831 15.835 15.836 15.837

TEETH PER INCH 32 TPI 24 TPI 18 TPI 32 TPI 24 TPI 18 TPI

BLADE LENGTH 305mm 305mm 305mm 305mm 305mm 305mm

BOX QTY 2 2 2 10 10 10

HACKSAW BLADES

ITEM # 15.996 15.862 15.839

High Carbon Steel Hacksaw Blades

High carbon steel blades cut mild steel, cast iron, aluminium and copper. ITEM # 15.993 15.994 15.995

TEETH PER INCH 32 TPI 24 TPI 18 TPI

BLADE LENGTH 305mm 305mm 305mm

BOX QTY 10 10 10

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

43


SAWS Electrician’s 11 Pc Bi-Metal Hole Saw Set

Includes 8 hole saws, 2 universal arbors and 1 hex key. Bi-Metal hole saws provide superior cutting performance in wood and metal. Has a 10x longer cutting life than other Stanley® hole saws. Lifetime warranty. Saw sizes: 16, 20, 25, 32, 40, 51, 64 & 73mm ITEM # 15.0011

BOX QTY 4

Plumber’s 9 Pc Bi-Metal Hole Saw Set

Includes 6 hole saws, 2 universal arbors and 1 hex key. Bi-Metal hole saws provide superior cutting performance in wood and metal. Has a 10x longer cutting life than other Stanley® hole saws. Lifetime warranty. Saw sizes: 20, 25, 32, 46, 54 & 79mm

HOLE SAW SETS

ITEM # 15.0009

44

BOX QTY 4

Hole Saw Set Including 4 Blades

Makes clean, round cuts in wood, practical board and plastic. Four blade sizes: 32mm, 38mm, 51mm, 54mm. For use with an electric drill.

ITEM # 15.774

BOX QTY 12

Visit us at: www.stanleytools.com


Planes & Surform Stanley® Innovation Advantage – Greater Control and Accuracy

Owning quality finishing tools says a lot about how serious a woodworker you are. Stanley’s line of finishing tools are made with only the best materials, the parts are precision ground and they are designed to give woodworkers greater control and accuracy.

Cutter adjusts for depth and alignment, offering precise control

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

45


PLANES Bailey速 Bench Planes

Grey cast iron base with side and bottom precision ground. Durable epoxy coating for long-lasting protection. Hardened, tempered, and precision ground tool steel cutter for cutting edge durability. Fully machined and polished double iron cutter and lever. Frog seat is machined for precise mouth adjustment. Precise shaving control provided by exact depth and lateral cutter adjustment. Solid brass cutter adjustment knob for accuracy and durability. Quick release cam-lock for easy iron removal. Kidney shaped hole in lever cap prevents accidental slippage of cutter. Contoured and polished high impact polymer handles and knobs. Smoothing #3, #4 and #4-1/2: For workshop, site or fine finishing of high quality work. Jack #5: For rapid stock removal prior to commencing construction work. Fore #6: For stock removal and truing up long edges or leveling wide boards. Jointer #7: For accurate truing of long edges. DESCRIPTION Smoothing #3 Smoothing #4 Smoothing #4-1/2 Jack #5 Fore #6 Jointer #7

WIDTH x LENGTH 45 x 240mm 50 x 245mm 60 x 260mm 50 x 350mm 60 x 450mm 60 x 560mm

BOX QTY 1 1 1 1 1 1

PLANES

ITEM # 12.003 12.004 12.045 12.005 12.006 12.007

Bench Plane (Handyman #4)

Fully adjustable cutter for depth of cut and alignment. Quick release cam-lock for easy blade removal. Contoured polymer handles and knobs. ITEM # 12.204

WIDTH x LENGTH 50 x 245mm

BOX QTY 6

Rebate Bench Plane (RB10)

Supplied with 6 easy to change replaceable blades. Fully adjustable for depth of cut and alignment. For stock removal, smoothing and rebating wood. ITEM # 12.100

46

WIDTH x LENGTH 50 x 260mm

Visit us at: www.stanleytools.com

BOX QTY 1


PLANES Block Planes

Grey cast iron base with side and bottom machined smooth and true. Durable epoxy coating for long lasting protection. Cast in finger rest at front of plane for comfort during use. Hardened and tempered tool steel cutter for cutting edge durability. Fully Adjustable Block Plane #9-1/2: Fully adjustable for depth of cut, cutter alignment and size of mouth. Cutter seats at 21°. For end grain and general purpose fine finishing. Low Angle Block Plane #60-1/2: Low angle cutter seats at 13 1/ 2°. For end grain and plastic laminates. Block Plane #220: Cutter rests at a 21° angle, ideal for cross grain planing. Cutter is fully adjustable for depth of cut and lateral alignment. Block Plane #110: General purpose block plane. Block Plane #102: Small Block Plane – ideal for use by model makers. DESCRIPTION Fully Adjustable Block Plane #9-1/2 Low Angle Block Plane #60-1/2 Block Plane #220 Block Plane #110 Block Plane #102

WIDTH x LENGTH BOX QTY 40 x 160mm 6 35 x 160mm 6 40 x 180mm 6 40 x 180mm 6 35 x 140mm 6

Rebate Plane – Duplex

Two cutter positions for regular or bull nose work. Cutter adjustable for depth of cut in the rear position. Supplied with and adjustable fence, depth gauge and cutting spur. ITEM # 12.078

WIDTH x LENGTH 40 x 255mm

BOX QTY 1

Replacement Plane Irons And Cutters

Stanley® replacement plane irons are made from hardened and tempered high carbon chrome steel which have excellent edge retention characteristics and allows razor sharp edge to be honed. All cutters are ground to give a flat surface that is easier to sharpen. These irons are supplied with an accurate ground edge of 25°, but before use we recommend an additional honed angle of 30° be applied using a fine sharpening stone and honing guide (16.050, refer to chisel section). ITEM# 12.312 12.313

TYPE Bench Plane Bench Plane

12.134 12.315

Bench Plane Bench Plane

12.378 12.202 12.504 12.508

Bench Plane Block Plane Block Plane Block Plane

12.330 12.333

Block Plane Special Purpose

FOR USE WITH 12.003 12.204 12.004 12.005 12.034 12.006 12.007 12.045 12.005 12.100 12.102 12.060 12.020 12.220 12.116 12.078

LENGTH 45mm 50mm

BOX QTY 6 6

50mm 60mm

6 6

50mm 33mm 35mm 40mm

50 6 6 6

40mm 38mm

6 6

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

PLANES / IRONS & CUTTERS

ITEM # 12.020 12.060 12.220 12.116 12.102

47


PLANES Spokeshave

Fully adjustable for depth of cut and alignment. 12.151 – flat for convex shapes. 12.152 – round for concave shapes. ITEM # 12.151 12.152

BLADE LENGTH 55mm (Straight) 55mm (Curved)

BOX QTY 1 1

Spokeshave & Scraper Irons

SPOKESHAVES / AVIATION SNIPS

ITEM # 12.336 12.350

DEPTH OF THROAT 45mm 55mm

TO SUIT 12.064, 12.063 12.151, 12.152

BOX QTY 6 6

MaxSteel™ Aviation Snips

Exceeds ANSI standards for cutting performance and durability. Serrated cutting edges prevent slippage when cutting. Double overwind spring for longer life. High leverage, compound cutting design cuts up to 18-Gauge steel. Slip-resistant bi-material palm cushion grip. Patented hinge plate for easy product function identification. One-handed automatic latch release with the squeeze of the handles. Chrome plated hardware. Ideal for cutting aluminium, sheet metal, vinyl siding, screening, cardboard, leather and copper. ITEM # 14.562 14.563 14.564 14.566 14.567 14.568

DESCRIPTION Left Cut (Red) Straight Cut (Yellow) Right Cut (Green) Long Straight Cut (Yellow) Offset Left Cut (Red) Offset Right Cut (Green)

BOX QTY 6 6 6 6 6 6

14.562 Left Cut

48

Visit us at: www.stanleytools.com

14.567 Offset Left Cut


SURFORM Surform® Plane

Resilient enough for use on materials that would dull a traditional bench plane blade. Manufactured with a metallic grey, die-cast alloy body. Handle made of high impact polymer. Fitted with a replaceable 250mm blade. ITEM #

LENGTH

BOX QTY

21.296

310mm

2

Surform® Planerfile

Can be used as either a plane or a file. Fitted with replaceable standard cut blade and supplied with one spare blade ITEM #

LENGTH

BOX QTY

21.122

310mm

2

Surform® Block Plane

ITEM #

LENGTH

BOX QTY

21.399

150mm

2

SURFORM

Useful, one handed tool. Ideal for end-grain work, automotive bodywork repair, smoothing edges of laminates. Manufactured with a metallic grey, die-casting alloy body. Includes thumb screw blade tension for quick blade replacement. Fitted with a replaceable 140mm fine cut blade.

Surform® Plane – Moulded Body

Lightweight, moulded body. For edges and confined spaces

ITEM #

LENGTH

BOX QTY

21.103

250mm

6

Surform® Block Plane – Moulded Body Lightweight, moulded body. For edges and confined spaces ITEM #

LENGTH

BOX QTY

21.104

155mm

6

Surform® Shaver

Compact and effective lightweight polypropylene moulded body. Curved blade for increased stock removal. The blade also has side cut teeth for shaving in corners. Works on the pull stroke. Simple, click-on blade replacement. ITEM #

OVERALL LENGTH

BOX QTY

21.115

181mm

6

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

49


SURFORM Surform® Flat File

Superb tool for use as a rasp on wood, plastic, soft metals and many other materials. Manufactured with a metallic grey, die-cast alloy body. Handle made of high impact polymer. Fitted with a replaceable 250mm blade. ITEM #

LENGTH

BOX QTY

21.295

440mm

2

Surform® Round File

SURFORM / REPLACEMENT BLADES

Especially useful for enlarging holes and smoothing curved surfaces. Ideal for pipe installations in MDF, chipboard, drywall or laminates. The front grip can be removed when used in small holes. Manufactured with a high impact polymer handle and thumb support. Fitted with a replaceable (10”/250mm) round blade.

ITEM #

LENGTH

BOX QTY

21.297

395mm

2

Surform® Flat File – Moulded Body

Lightweight, moulded body. Slight curve on the blade for increased stock removal.

ITEM #

OVERALL LENGTH

BOX QTY

21.102

300mm

6

Surform® Round Replacement Blade

Round blade for enlarging holes and smoothing curved surfaces. ITEM #

OVERALL LENGTH

BOX QTY

21.291

250mm

6

Surform® Standard Cut Replacement Blade

All purpose blade – use on wood, vinyl, plaster, thermalite, fibreglass and linoleum. Standard cut blade features teeth flush to the blade edge for working into edges.

ITEM #

OVERALL LENGTH

BOX QTY

21.293

250mm

6

Surform® Half Round Replacement Blade

Half round convex blade for faster stock removal and shaping curved surfaces. Ideal for work on fibreglass and removing filler (for cars and boats).

50

ITEM #

OVERALL LENGTH

BOX QTY

21.299

250mm

6

Visit us at: www.stanleytools.com


SURFORM Surform速 Fine Cut Replacement Blade

Designed to produce a fine finish on hard woods, end grains, and soft metals. ITEM #

OVERALL LENGTH

BOX QTY

21.393

250mm

6

Surform速 Fine Cut Replacement Blade

Fine cut blade for finishing work, end grain, wallboards and soft metals. ITEM #

OVERALL LENGTH

BOX QTY

21.398

140mm

6

REPLACEMENT BLADES

Surform速 Metal & Plastics Replacement Blade

Suitable for use on both metal and plastic. ITEM #

OVERALL LENGTH

BOX QTY

21.508

250mm

6

Surform速 Shaver Replacement Blade

Curved blade for fast stock removal. Works on the pull stroke. ITEM #

OVERALL LENGTH

BOX QTY

21.515

63mm

6

Blade Selection Guide Product Code

Fits Tools

Overall Length mm

Width in mm

Cut

Box Qty

21-291

21-297

250

15

Regular

12

21-293

21-295 21-296 21-103 21-122

250

40

Regular

12

21-299

21-295 21-296

250

37

Regular

12

21-393

21-295 21-296 21-103 21-122

250

40

Fine

12

21-398

21-399 21-102 21-104

140

40

Fine

12

21-508

21-295 21-296 21-103 21-122

250

40

Regular

12

21-515

21-115

63

40

Regular

12

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

51


Clamps & Pliers

Stanley® Innovation Advantage – Travel faster! A trigger clamp is essentially used as a third hand. We think they should work just about as quickly and easily. Stanley’s new FatMax® Xtreme™ Auto Trigger Clamp goes from open to closed in a 1/4 of a second. That’s a new world record!

52

Visit us at: www.stanleytools.com


CLAMPS FatMax® Xtreme™ Auto Trigger Clamp

The fastest one-handed clamp in the world. 450Lbs of clamping force. Tool free change from clamping to spreading. Spring loaded automatic clamping mechanism. Red trigger release button with call out on packaging. ITEM # 83.124

LENGTH 300mm

BOX QTY 4

FatMax® Trigger Clamps

Quickly converts from a clamp to a spreader without the use of tools. Patent-pending drive mechanism provides three times faster travel and 50% more clamping force than competitive products. Smaller jaw can be positioned anywhere along bar for a range of applications. Removable bar design integrates longer or shorter bars, as needed. Two bars can be bolted together for increased clamping capacity. Reinforced nylon and steel construction ensures strength and durability. Removable jaw pads protect surfaces from marring and damage. ITEM # 83.004 83.005 83.006 83.007 83.008

LENGTH 150mm 300mm 455mm 610mm 910mm

BOX QTY 4 4 4 4 2

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

TRIGGER CLAMPS

53


PLIERS

1000V VDE Pliers

Bi-material grips insulated against electrical shock to 1000 volts, forged from chrome vanadium steel for durability, precision ground and high frequency hardening cutting edges for superior wear resistance. Diagonal cutting pliers feature high leverage pivot design for easier cutting, machined jaw teeth for a slip resistant grip, lacquer finish for corrosion resistance.

Diagonal Cutting Pliers ITEM # 84.003 84.004

SIZE

180mm 210mm

BOX QTY 4 4

Combination Pliers

VDE PLIERS

ITEM # 84.001 84.002

SIZE

180mm 200mm

BOX QTY 4 4

Long Nose Pliers ITEM # 84.006 84.007

SIZE

180mm 210mm

BOX QTY 4 4

Bent Nose Pliers ITEM # 84.008

SIZE

200mm

BOX QTY 4

Multigrip Pliers ITEM # 84.294

255mm

SIZE

BOX QTY 4

ITEM #

CONTAINS

BOX QTY

84.011

185mm Combination 175mm Diagonal 210mm Long Nose

4

VDE Plier Set - 3 Pc

54

Visit us at: www.stanleytools.com


PLIERS

The MaxSteelTM Line of Pliers provides up to 45% less cutting effort with up to a 33% longer cutting edge. The dual durometre bi-material grips provide a comfortable and secure grip. Narrow Head Box Joint Diagonal Pliers allow for cutting in confined areas. Both Combination and Diagonal Cutting Pliers have a leverage design for heavy duty use. All Long nose Pliers have a slim line design for reaching into tight places. All Pliers drop forged from high carbon, alloy steel for long life and durability.

Diagonal Cutting Pliers 89.859

SIZE

150mm 190mm

BOX QTY 4 4

MAXSTEELâ&#x201E;˘ PLIERS

ITEM # 89.858

High-leverage Diagonal Cutting Pliers ITEM # 89.861 89.862

SIZE

200mm 255mm

BOX QTY 4 4

Combination Pliers ITEM # 89.867 89.868

SIZE

185mm 200mm

BOX QTY 4 4

Long Nose Pliers ITEM # 89.869 89.870

SIZE

150mm 200mm

BOX QTY 4 4

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

55


PLIERS Bent Long Nose Pliers ITEM #

SIZE

89.872

200mm

BOX QTY 4

MAXSTEEL™ PLIERS

Wire Stripper Pliers ITEM #

SIZE

89.873

150mm

BOX QTY 4

Cable Cutter Pliers ITEM #

SIZE

89.874

215mm

BOX QTY 4

Edge Cutting Pliers

56

ITEM #

SIZE

89.875

150mm

Visit us at: www.stanleytools.com

BOX QTY 4


PLIERS

Red Series Pliers

Strong, drop-forged, tempered steel pliers available in various designs and sizes. Rust resistant polished chrome finish. Over moulded red vinyl grip handles for comfort and ease of use. Finely honed cutting edges cut most types of wire. Tempered alloy steel for strength and durability.

Diagonal Cutting Pliers ITEM # 84.131 84.133

SIZE

152mm 178mm

BOX QTY 6 6

Combination Pliers SIZE

178mm 203mm

BOX QTY 6 6

RED SERIES PLIERS

ITEM # 84.150 84.151

Long Nose Pliers ITEM # 84.121 84.123

SIZE

152mm 178mm

BOX QTY 6 6

Multigrip Pliers ITEM # 84.139

SIZE

250mm

BOX QTY 6

Circlip Pliers ITEM # 84.271 84.273 84.272 84.274

SIZE

175mm 175mm 175mm 175mm

TYPE External Straight Internal Straight External Bent Internal Bent

BOX QTY 6 6 6 6

Long Reach Pliers ITEM # 84.971

SIZE

279mm

BOX QTY 6

Bent Nose Long Reach Pliers ITEM # 84.972

SIZE

279mm

BOX QTY 6

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

57


PLIERS Maxgrip Self Adjusting Pliers ITEM # 84.881

SIZE

152mm

BOX QTY 12

Locking Jaw Pliers

ADJUSTABLE PLIERS / MINIATURE PLIERS

ITEM # 84.369

SIZE

250mm

BOX QTY 6

Miniature Pliers Mini Diagonal Cutting Pliers ITEM # 84.091

SIZE

101mm

BOX QTY 4

Mini Needle Nose Pliers ITEM # 84.092

SIZE

127mm

BOX QTY 4

Mini End Nip Pliers ITEM # 84.093

SIZE

101mm

BOX QTY 4

Mini Bent Nose Pliers ITEM # 84.094

SIZE

125mm

BOX QTY 4

Mini Flat Nose Pliers ITEM # 84.095

58

SIZE

101mm

Visit us at: www.stanleytools.com

BOX QTY 4


PLIERS MaxGrip Locking Adjustable Wrench

Patented design. Two tools in one: traditional adjustable wrench and locking plier. Jaw grips fastener and won’t slip off. Applications: maintenance and automotive repair, plumping, general assembly tasks. Forged body exceeds ANSI standards for torque. ITEM # 85.610

SIZE

250mm

BOX QTY 6

Unique professional profile. Extra wide jaw opening. Black phosphate finish with polished faces. Bi-material ergonomic rubber grip. Laser etched Imperial and metric sizing. ITEM # 90.947 90.948 90.949 90.950

SIZE

152mm 203mm 254mm 305mm

BOX QTY 1 1 1 1

Adjustable Wrenches - Cushion Grip

Soft cushion grip fits palm for comfort. Extra wide jaw capacity. Inch scale is laser etched onto jaw for easy measurement. Hang hole in handle for wall storage. ITEM # 85.764 85.763 85.762

SIZE

152mm 203mm 250mm

BOX QTY 4 4 4

Adjustable Wrenches - Chrome

Fully hardened and tempered jaws for holding on fastening nuts and bolts. Rust resistant finish.

ITEM # 87.430 87.431 87.432 87.433 87.434 87.435

SIZE

100mm 150mm 200mm 250mm 300mm 375mm

BOX QTY 6 6 6 6 6 6

ADJUSTABLE WRENCHES / PIPE WRENCHES

MaxSteel™ Adjustable Wrenches - Cushion Grip

Pipe Wrenches

Two way toothing and spring loaded jaw provide positive grip. The cast iron handle with drop forged jaw is heat treated. Knurled large carbon steel nut. ITEM # 87.621 87.622 87.623 87.624 87.625 87.626

SIZE

200mm 250mm 300mm 350mm 450mm 600mm

BOX QTY 6 6 6 6 2 6

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

59


Hammers & Demolition Stanley® Innovation Advantage – 30% less torque transmitted through the grip! Stanley’s latest duel density grip design reduces the effect of torque on the wrist and elbows. In fact, in independent lab testing the 20oz. FatMax® Xtreme™ AntiVibe™ hammer transmitted 30% less torque through the grip than a standard 20oz. one piece steel hammer.

Patented tuning fork design helps reduce shock and harmful vibrations

60

Visit us at: www.stanleytools.com


HAMMERS

THE IMPORTANCE OF THE TUNING FORK.

Patented AntiVibe™ technology delivers for greater shock absorption than competitor’s 1 piece steel hammers. Ultimately translating into fewer job related injuries.

Stanley® FatMax® AntiVibe™ Hammers

Standard Steel Hammers

1.0

1.0

real

real

-1.0

-1.0 -5.05mSEC IMP RES Ex 4 X: 94.53mSEC

151.56MSEC Y: 0.0117

-5.08mSEC IMP RES Ex 4 X: 54.30mSEC

151.56MSEC Y: -0.0877

ANTIVIBE HAMMERS

FatMax Xtreme™ AntiVibe™ Claw Hammer ®

Patented torsion control grip technology reduces the effects of torque on wrists and elbows. Patented AntiVibe™ technology minimizes vibration and shock at impact. Magnetic Nail Start feature for extended reach and one-handed nailing capability. Precision Balanced – Feel the Difference. Forged, one-piece steel construction for increased strength and durability. ITEM # 51.164

OVERALL LENGTH 343mm

WEIGHT 20oz/567g

BOX QTY 4

FatMax® AntiVibe™ Claw Hammer

One piece double forged steel head and handle for superior swing and durability. Patented tuning fork design reduces harmful vibrations. Ergonomically designed handle for multiple grip positions. Rubber grip moulded directly onto shaft. Specially textured handle grip for improved performance even when wet. Enlarged handle to help reduce gripping fatigue. ITEM # 51.952

OVERALL LENGTH 360mm

WEIGHT 24oz/680g

BOX QTY 4

FatMax® AntiVibe™ Club Hammer

Made for striking wood, metal, concrete or stone. Longer handles provide a greater arc-swing to generate increased power per strike. Patented tuning fork design reduces harmful vibration that can cause wrist and arm injuries. Forged, one-piece steel construction for increased strength and durability. Rim temper reduces incidences of chipping or spalling. Ergonomically designed handle with rubber grip for increased comfort and performance.

ITEM # 56.001

HEAD LENGTH 103

WEIGHT 3lbs/1.4kg

BOX QTY 4

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

61


HAMMERS FatMax® AntiVibe™ Engineering Hammer

Made for striking wood, metal, concrete or stone. Longer handles provide a greater arc-swing to generate increased power per strike. Patented tuning fork design reduces harmful vibration that can cause wrist and arm injuries. Forged, one-piece steel construction for increased strength and durability. Rim temper reduces incidences of chipping or spalling. Ergonomically designed handle with rubber grip for increased comfort and performance.

ITEM # 56.004

HEAD LENGTH 128mm

WEIGHT 3lbs/1.4kg

BOX QTY 4

FatMax® AntiVibe™ Drywall Hammer

Designed specifically for the installation of drywall. The striking face of the hammer is offset to facilitate working overhead.The blade-edge is commonly used to remove old material and/or mark cut-outs required for electrical outlets & switches.

ANTIVIBE HAMMERS

ITEM # 54.015

OVERALL LENGTH 343mm

WEIGHT 14oz/398g

BOX QTY 4

FatMax® AntiVibe™ Bricklayer’s Hammer

Designed for setting and cutting brick, masonry tile, and concrete block. The striking face is flat with chamfered edges, while the blade has a hardened cutting edge designed to score materials before striking for an even cut. ITEM # 54.022

OVERALL LENGTH 279mm

WEIGHT 20oz/570g

BOX QTY 4

FatMax® AntiVibe™ Carpenter’s Hatchet

Designed for cutting wood and/or driving stakes or un-hardened nails. Patented tuning fork design reduces harmful vibration that can cause wrist and arm injuries. Forged, one-piece steel construction for increased strength and durability. Rim temper reduces incidences of chipping or spalling. Ergonomically designed handle with rubber grip for increased comfort and performance. ITEM # 54.023

OVERALL LENGTH 330mm

WEIGHT 28oz/794g

BOX QTY 4

Steel Shaft Claw Hammers

Hercules 51.090 & 51.091 - Fully polished drop forged carbon steel head, hardened and tempered for maximum strength. Handle is hardened tubular steel with a comfortable rubber grip. Chip resistant chamfered poll. Double bevelled claw for clean nail pulling. Steelmaster 51.033 - Heat treated high carbon steel head for greater durability. Rim-tempered face helps reduce chipping. Fully polished and laser-marked head attached to a chrome and shot-blasted tubular steel shaft. Rubber grip has a textured surface for better grip and comfort. Flared grip end to help prevent the hammer from slipping.

ITEM # 51.090 51.091 51.033

62

OVERALL LENGTH 320mm 320mm 340mm

WEIGHT 16oz/450g 20oz/570g 20oz/570g

Visit us at: www.stanleytools.com

BOX QTY 6 6 4


HAMMERS Fibreglass Shaft Claw Hammers

Fully polished drop forged carbon steel head, hardened and tempered for maximum strength. Head and handle firmly bonded with cold/heat resistant epoxy resin for great strength and long life. Chip resistant chamfered poll. Double bevelled claw for clean nail pulling.

ITEM # 51.071 51.072 51.061* 51.109*

OVERALL LENGTH 335mm 335mm 335mm 335mm

WEIGHT 16oz/450g 20oz/570g 20oz/570g 24oz/680g

BOX QTY 6 6 6 6

* Hercules Models.

Wooden Shaft Claw Hammers

51.533, 51.534 & 51.537 Hardwood handle. Head fixed to shaft with black epoxy glue. Fully polished head. Curved, sharpened claw pulls nails easily.

OVERALL LENGTH 325mm 325mm 335mm

WEIGHT 16oz/450g 20oz/570g 24oz/680g

BOX QTY 6 6 6

HAMMERS

ITEM # 51.533 51.534 51.537

Warrington Hammers (Cross Pein)

The joinerâ&#x20AC;&#x2122;s hammer, for all lighter woodwork, assembly and general use. The straight cross pein opposite the striking face is designed for starting a panel pin between finger and thumb, or for driving nails into corners where the round face will not fit. Ash Handle.

ITEM # 54.070 54.000 54.001 54.072

OVERALL LENGTH 280mm 280mm 300mm 300mm

WEIGHT 6oz/175g 8oz/225g 10oz/280g 12oz/340g

BOX QTY 6 6 6 6

Wooden Shaft Ball Pein Hammers

High-carbon, steel forged head, hardened and tempered. Select clear lacquered wooden hickory handle. Polished face and pein. Ball end used for riveting and poll used for normal striking. Meets ANSI standards.

ITEM # 54.004 54.189 54.190 54.191 54.192 54.193

OVERALL LENGTH 275mm 311mm 345mm 355mm 381mm 405mm

WEIGHT 4oz/110g 8oz/230g 12oz/340g 16oz/450g 24oz/680g 32oz/910g

BOX QTY 6 6 6 6 6 6

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

63


HAMMERS Jacketed Fibreglass Club Hammer

Forged steel head – hardened and tempered machine-finished faces. Yellow jacketed fibreglass handle provides greater visibility, strength and durability. Compact design.

ITEM # 56.705

HEAD LENGTH 114mm

WEIGHT 3lbs/1.4kg

BOX QTY 4

Rubber Mallet

MALLETS / COMPO-CAST® HAMMERS

Tough rubber head molded to a lacquered handle. ITEM # 57.528

HEAD LENGTH 350mm

WEIGHT 24oz/680g

BOX QTY 5

Compo-Cast® Standard Head Dead Blow Hammers

Non-sparking soft face hammer of Uni-Cast™ construction has no exposed metal. Soft faces do not mar surfaces or equipment. Do not absorb liquids. Dead blow function uses steel shot. Steel reinforced handle provides added strength and safety, resists breaking on overstrike.

ITEM # 57.530 57.531 57.532 57.533 57.534

OVERALL LENGTH 275mm 286mm 327mm 362mm 387mm

WEIGHT 10oz/283g 18oz/510g 21oz/595g 42oz/1.19kg 52oz/1.47kg

HEAD/ FACE 79/30mm 95/40mm 103/45mm 117/53mm 136/63mm

BOX QTY 4 4 4 4 2

Compo-Cast® Sledge Model Dead Blow Hammers

Non-sparking soft face hammer of Uni-Cast™ construction has no exposed metal. Soft faces do not mar surfaces or equipment. Do not absorb liquids. Dead blow function uses steel shot. Steel reinforced handle provides added strength and safety, resists breaking on overstrike.

ITEM # 57.550 57.551 57.552 57.554

64

OVERALL LENGTH 498mm 659mm 762mm 914mm

WEIGHT 5lb/2.27kg 8lb/3.63kg 10.5lb/4.76kg 11.5lb/5.21kg

Visit us at: www.stanleytools.com

HEAD/ FACE 178/63mm 181/66mm 210/76mm 226/86mm

BOX QTY 2 2 2 2


DEMOLITION FatMax® Xtreme™ Fubar™ Functional Utility Bar

F orged from one piece of high carbon steel for increased strength and durability. Two-tiered jaw for grabbing common dimensional lumber and decking, tempered chisel blade for splitting and cutting building materials, large mouth striking face for maximum demolition effect, bevelled nail slot for pulling and prying nails, textured Bi-material grip is over-moulded directly onto the bar for excellent comfort and control even when wet. ITEM # 55.099

DESCRIPTION Functional Utility Bar

WEIGHT 1.8kg/64oz

BOX QTY 2

FatMax® Fubar™ II Functional Utility Bar

ITEM # 55.119

DESCRIPTION Functional Utility Bar II

WEIGHT 1kg/35oz

BOX QTY 2

FatMax® Wrecking Bars

Tri-lobe design for increased strength and durability. Engineered for superior strength and performance. Forged high-carbon steel for extra strength. Polished tips for improved functionality and performance. Powder-coated high-vis yellow finish for visibility and safety. ITEM # 55.101 55.102 55.104

OVERALL LENGTH 355mm 610mm 914mm

WRECKING BARS

Easy to swing 1kg total weight. 22oz head weight – similar to a hammer. Serrated jaw for gripping timber, tapered nail slot for pulling nails. One piece forged steel. Textured cushion grip for comfort and control. Beveled chisel/prying end.

BOX QTY 4 4 4

Stanley® Hexagonal Steel Wrecking Bar

Forged high carbon steel for extra strength. Heat treated for toughness. Hexagonal cross section for strength and comfort. Polished tips for performance. Powder coated high-vis yellow finish for visibility and safety. Beveled chisel end. Claw and chisel end polished, claw slotted. ITEM # 55.118 55.124 55.130 55.136

OVERALL LENGTH 455mm 610mm 760mm 915mm

BOX QTY 6 6 6 6

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

65


DEMOLITION Wonder Bars

55.525 - Extra long length for extra reach and more leverage. Tight radius angle for precise positioning. Extra long tongue for better grip and longer reach for hard-to-get-at places. Arch in centre of bar gives more swing during nail pulling â&#x20AC;&#x201C; no need for a wood block. Works as a panel lift: position pry end under panel, press down radius end with foot, hands-free operation. 55.515 - Forged high carbon steel. Heat treated for extra toughness with polished and bevelled cutting edges. Contoured bar is ideal for pulling nails, prying, lifting and scraping. Bevelled nail slot both ends. ITEM # 55.525 55.515

OVERALL LENGTH 395mm 314mm

BLADE WIDTH 44mm 44mm

BOX QTY 4 4

Claw & Moulding Bars

PRY BARS / NAIL PUNCHES

55.114 - Precision tools for moulding work and prying. Forged high carbon steel bars, tempered for safety and heat treated for durability. Polished, beveled claws allow for precision nail pulling and prying. 55.117 - Precision tools for moulding work and prying. Forged high carbon steel bars, tempered for safety and heat treated for durability. Polished, bevelled claws allow for precision nail pulling and prying. Flat surface allows claw to be driven under deeply embedded nails. ITEM # 55.114 55.117

OVERALL LENGTH 254mm 254mm

BLADE WIDTH 44mm 44mm

BOX QTY 2 2

Cushion Grip Nail Punches

Grip is slip-resistant in all weather conditions and ribbed to absorb shock, improving precision. Long length enables user to set nails in hard-to-reach areas. Fully hardened, precision-milled steel for long life. Long, beveled tip for easy nail head alignment. Colour coded by tip size for quick identification. Patented design developed for professional use. ITEM # 58.911 58.912 58.913 ITEM # 58.930

Q/A LENGTH INCH MM 5 127 5 127 5 127

TIP INCH 1/32 2/32 3/32

BOX QTY MM .08 1.6 2.4

CONTAINS 3 Pc Set - 58.911, 58.912, 58.913

6 6 6 BOX QTY 6

Square Head Nail Punches

Square head, round knurled body. Alloy steel is hardened and tempered. Cupped, chamfered tip. Square head prevents rolling when set down. ITEM # 58.111 58.112 58.113 58.114 ITEM # 58.230

66

Q/A LENGTH INCH MM 4 100 4 100 4 100 4 100

TIP INCH MM 1/32 .08 2/32 1.6 3/32 2.4 1/8 3.2

Sq. STOCK SIZE BOX QTY INCH MM 5/16 8.0 6 5/16 8.0 6 5/16 8.0 6 5/16 8.0 6

CONTAINS 3 Pc Set - 58.111, 58.112, 58.113

Visit us at: www.stanleytools.com

BOX QTY 6


Chisels Stanley® Innovation Advantage – Thru-Tang! A good chisel or nail set is as much about how it balances in the hand as the quality of the steel from which it’s made. Stanley’s chisels and nail sets pass this professional litmus test. They are shaped and balanced to provide great control. Stanley’s FatMax® Chisels feature Thru-Tang Blades which makes them 50% stronger than other chisels.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

67


CHISELS FatMax速 Thru-Tang Chisels

Bevel edge chisels for the professional or craftsman. Full size bi-material Cellulose Acetate Buterate (CAB) & TPE handle provides superior grip and comfort. Large and ergonomically designed to provide comfort in prolonged use. The steel striking cap allows the chisel to withstand blows from a steel hammer. Thru-Tang design increases strength and durability by 50% - Labratory Tested. Sheffield long steel blades made from high quality chrome carbon ball bearing grade steel. Precision ground to high standards of accuracy. Hardened and tempered to 58-60HRC over the full length (except the last 25mm), for superior cutting edge durability. Blades electrophoretic lacquered for protection against corrosion. Honing before first use is highly recommended.

THRU-TANG CHISELS

ITEM #

WIDTH (mm)

BOX QTY

5-16-251

6

6

5-16-252

8

6

5-16-253

10

6

5-16-254

12

6

5-16-255

14

6

5-16-256

15

6

5-16-257

16

6

5-16-258

18

6

5-16-259

20

6

5-16-260

22

6

5-16-261

25

6

5-16-262

30

6

5-16-263

32

6

5-16-264

35

6

5-16-265

38

6

5-16-266

40

6

5-16-267

50

6

FatMax速 Thru-Tang Chisel Set - 3 Pc ITEM #

CONTAINS

WIDTH (mm)

BOX QTY

5-16-268

5-16-254 5-16-258 5-16-261

12 18 25

6

FatMax速 Thru-Tang Chisel Set - 5 Pc

68

ITEM #

CONTAINS

WIDTH (mm)

BOX QTY

5-16-269

5-16-251 5-16-254 5-16-258 5-16-261 5-16-263

6 12 18 25 32

6

Visit us at: www.stanleytools.com


CHISELS FatMax速 Thru-Tang Butt Chisels

ITEM #

WIDTH (mm)

BOX QTY

16.973

6

6

16.975

12

6

16.977

18

6

16.978

25

6

16.979

32

6

16.980

38

6

FatMax速 Thru-Tang Butt Chisel Set - 3 Pc ITEM #

CONTAINS

WIDTH (mm)

BOX QTY

16.970

16.975 16.977 16.978

12 18 25

6

THRU-TANG CHISELS

Short series blade for strength and control. Hardened and tempered high chrome carbon alloy steel blade for edge retention. Cutting edge is finely ground and ready for use. Thru-Tang design provides 50% more strength and durability. Precision ground blade for accurate sizes. High impact shatter resistant handle for durability and safety. Patented, ergonomically designed, bi-material grip handle for maximum comfort. Steel striking cap for use with steel headed hammer.

FatMax速 Thru-Tang Butt Chisel Set - 6 Pc ITEM #

CONTAINS

WIDTH (mm)

BOX QTY

16.971

16.973 16.975 16.977 16.978 16.979 16.980

6 12 18 25 32 38

6

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

69


CHISELS Dynagrip™ Chisels - With Strike Cap

Cushion grip bi-material handle made from polypropylene for improved grip and enhanced chisel alignment. Now with Steel Strike Cap – can be used with steel hammer for increased striking / impact. Forged high carbon steel blade for strength and durability. Pre sharpened and ready for use. ITEM #

WIDTH (mm)

BOX QTY

16.400

6

6

16.402

10

6

16.403

12

6

16.406

16

6

16.407

18

6

16.409

22

6

16.410

25

6

16.413

32

6

16.415

38

6

DYNAGRIP CHISELS

Dynagrip™ 3 Pc Chisel Set - With Strike Cap ITEM #

CONTAINS

WIDTH (mm)

BOX QTY

16.418

16.403 16.407 16.410

12 18 25

6

Dynagrip™ 5 Pc Chisel Set - With Strike Cap ITEM #

CONTAINS

WIDTH (mm)

BOX QTY

16.419

16.400 16.403 16.407 16.410 16.413

6 12 18 25 32

6

5000 Series 3 Pc Chisel Set

The traditional “carver” shaped handle is made from high gloss polypropylene to resist deformation and most workplace solvents and corrosive liquids. The handle design is preferred for intricate paring jobs. The blades are all one length (145mm), made from carbon steel, and hardened for the first 65mm of length, precision ground on all faces to a high standard of accuracy, with the point honed ready for use straight off the shelf. Blades are lacquer coated for corrosion resistance. ITEM #

16.007

70

CONTAINS 3 Pc Chisel Set (12mm, 18mm, 25mm)

Visit us at: www.stanleytools.com

BOX QTY

4


CHISELS FatMax® Electrician’s Chisel

For rough cutting and trimming of wood, wallboard and masonry.

ITEM # 16.330

OVERALL LENGTH 250mm

BLADE WIDTH 56mm

BOX QTY 3

FatMax® Floor Chisel

Used for cutting, prying or ripping of hardwood flooring and nails. Designed with offset blade and shorter bite for increased leverage.

OVERALL LENGTH 275mm

BLADE WIDTH 75mm

BOX QTY 3

FatMax® Cold Chisel

For cutting / shaping wrought iron, cast iron, steel, brass, bronze, copper, aluminum, bolts, nuts and rivets.

ITEM # 16.332

OVERALL LENGTH 305mm

BLADE WIDTH 25mm

BOX QTY 3

CHISELS/COLD CHISELS

ITEM # 16.331

FatMax® Brick Set

For cutting and splitting brick and masonry.

ITEM # 16.328

OVERALL LENGTH 215mm

BLADE WIDTH 100mm

BOX QTY 3

Fatmax® Mason’s Chisel

Used for cutting and splitting hard stone, brick, and concrete. ITEM # 16.333

OVERALL LENGTH 215mm

BLADE WIDTH 45mm

BOX QTY 3

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

71


CHISELS Stanley® Cold Chisels

For cutting / shaping wrought iron, cast iron, steel, brass, bronze, copper, aluminum, bolts, nuts & rivets. ITEM # 16.286 16.287 16.288 16.289 16.290 16.291 16.292

OVERALL LENGTH 140mm 150mm 170mm 175mm 200mm 300mm 300mm

BLADE WIDTH 10mm 12mm 16mm 18mm 22mm 25mm 32mm

BOX QTY 3 3 3 3 3 3 3

Stanley® Cold Chisel Sets

COLD CHISELS

Available as 12 Pc punch and chisel kit and a 3 Pc chisel set. Accessible packaging enables customer to easily evaluate products in store. ITEM # 16.298 16.299

CONTAINS 3 Pc Cold Chisel Kit 12 Pc Punch & Chisel Kit

BOX QTY 3 3

7 Pc Punch & Cold Chisel Set In Wallet ITEM #

CONTAINS

18.790

Pin Punch - 5mm Centre Punch - 9.5mm Taper Punch - 3mm Taper Punch - 5mm Cold Chisel - 12mm Cold Chisel - 16mm Cold Chisel - 19mm

BOX QTY ?

Sharpening Kit

Complete system for accurate and precise sharpening of cutting edges. Kit contains: Honing guide, oilstone (200mm x 50mm aluminum oxide grit sharpening stone, double sided with fine and medium grade), and White Oil (for use with oilstone, non-flammable, non-toxic). Guides the user to achieve a precise sharp edge that is square to the blade. Features angle setting gauge with preset markings at 25˚, 30˚,and 35˚ for ease of set up. Suitable for use with all chisel blades and plane irons from 4mm-60mm.

72

ITEM #

BOX QTY

16.050

4

Visit us at: www.stanleytools.com


Screwdrivers Stanley® Innovation Advantage – Highest quality prevents corrosion, chipping or breaking Comfort, quality and versatility are the three attributes we engineer into our screwdriver line. Stanley® screwdriver handles are shaped and sized to provide comfort in the hand and torque at the fastener head. The materials and construction are of the highest quality to resist corrosion, chipping and breaking and with tips ranging from Standard to Phillips® to Torx® to Pozidriv, Stanley® screwdrivers cover almost every application.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

73


SCREWDRIVERS FatMax® Xtreme™ Demolition Drivers 2 Pc Set

Cold-formed steel strike cap withstands striking blows. Shatter-resistant bi-material acetate/rubber handle. Rubber grip with thumb indents makes prying easy. Shatter-resistant bar designed for striking and prying Thru-Tang bar transfers strike-force from strike cap to tip. Lacquer-coated bar resists rust. ITEM #

DEMOLITION / VDE SCREWDRIVERS

67.546

CONTAINS

BOX QTY

6

FatMax® Xtreme™ Demolition Driver 2 Pc Set 2 Pt Phillips® & 8mm Slotted

1000 Volt VDE Screwdriver & Current Tester Set - 7 Pc

Chrome vanadium blades heat treated to max torque. Insulation directly injection moulded around the blade according to EN60900. Ergonomic shock resistant anti slip handles. Each screwdriver individually tested to 1000V Hardness and torque values exceed ISO/DIN standards. Ergonomic grip for comfort and greater grip force. Black oxide blades, no peeling chrome. ITEM #

CONTAINS

DESCRIPTION

BOX QTY

65.980

65.966 65.967 65.968 65.969 65.973 65.974

3mm x 100mm 4mm x 100mm 5.5mm x 125mm 6.5mm x 150mm #1 Phillips® x 80mm #2 Phillips® x 100mm Current Tester

10

1000 Volt VDE Screwdrivers ITEM #

65.966 65.967 65.968 65.969 65.970 65.971 65.972 65.973 65.974 65.975

74

DESCRIPTION 3mm x 100mm 4mm x 100mm 5.5mm x 125mm 6.5mm x 150mm 8mm x 175mm 10mm x 200mm #0 Phillips® x 60mm #1 Phillips® x 80mm #2 Phillips® x 100mm #3 Phillips® x 150mm

Visit us at: www.stanleytools.com

BOX QTY

6 6 6 6 6 6 6 6 6 6


SCREWDRIVERS Cushion Grip Screwdriver Set - 10 Pc

The Stanley® 65.005 set gives a broad choice of screwdrivers to suit almost every job. For comfort and ease of use Stanley® Screwdrivers feature cushion grip handles. Stanley® blades are chrome vanadium with precision profiled magnetised tips for lasting efficiency. Lid is now designed to accommodate the 66.052 precision set.

65.005

CONTAINS

BOX QTY

10

65.157 - 60mm x #0 Phillips® 65.163 - 100mm x #1 Phillips® 65.166 - 45mm x #2 Phillips® 65.167 - 100mm x #2 Phillips® 65.172 - 150mm x #3 Phillips® 65.180 - 75mm x 3mm Standard 65.187 - 100mm x 5mm Standard 65.190 - 45mm x 6.5mm Standard 65.193 - 150mm x 6.5mm Standard 65.196 - 150mm x 8mm Standard

Carded Cushion Grip Screwdriver Set - 6 Pc

The Stanley® 65.242 set gives a choice of screwdrivers to suit most jobs. For comfort and ease of use Stanley® Screwdrivers feature cushion grip handles. Stanley® blades are chrome vanadium with precision profiled magnetised tips for lasting efficiency.

ITEM #

65.242

CONTAINS

BOX QTY

65.163 - 100mm x #1 Phillips® 65.169 - 150mm x #2 Phillips® 65.187 - 100mm x 5mm Standard 65.193 - 150mm x 6.5mm Standard 65-228* - 100mm x 5mm Standard Parallel 65-229* - 150mm x 5mm Standard parallel

12

* Not available individually in Australia.

Cushion Grip Screwdrivers ITEM #

DESCRIPTION

BOX QTY

65.157

#0 Phillips® x 60mm

12

65.162

#1 Phillips® x 75mm

12

65.163

®

#1 Phillips x 100mm

12

65.164

#1 Phillips® x 150mm

12

65.166

#2 Phillips® x 45mm

12

65.167

®

#2 Phillips x 100mm

12

65.169

#2 Phillips x 150mm

12

65.171

#2 Phillips® x 250mm

12

65.172

®

#3 Phillips x 150mm

12

65.173

#3 Phillips® x 200mm

12

65.180

3mm Standard x 75mm

12

65.183

3mm Standard x 150mm

12

65.187

5mm Standard x 100mm

12

65.188

5mm Standard x 150mm

12

65.190

6.5mm Standard x 45mm

12

65.191

6.5mm Standard x 100mm

12

65.193

6.5mm Standard x 150mm

12

65.196

8mm Standard x 150mm

12

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

CUSHION GRIP SCREWDRIVERS

ITEM #

75


SCREWDRIVERS Cased Acetate Screwdriver Set (T186) - 14 Pc

The Stanley® T186 gives a broad choice of screwdrivers to suit almost every job. Stanley® acetate screwdrivers feature extruded high impact cellulose acetate handles. Chrome vanadium blades with precision profiled magnetised tips for lasting efficiency. Clip in case with extra security and wall mounting holes. Lid is designed to accommodate the 66.052 precision screwdriver set. ITEM #

ACETATE SCREWDRIVERS

65.750

CONTAINS 65.521 - 38mm x #1 Phillips® 65.520 - 60mm x #0 Phillips® 65.522 - 100mm x #1 Phillips® 65.524 - 150mm x #2 Phillips® 65.525 - 150mm x #3 Phillips® 65.585 - 200mm x #2 Phillips® 65.555 - 38mm x 6mm Standard 65.545 - 45mm x 3mm Standard 65.540 - 75mm x 4mm Standard 65.542 - 100mm x 5mm Standard 65.547 - 150mm x 6mm Standard 65.550 - 200mm x 8mm Standard 65.553 - 250mm x 10mm Standard 65.580 - 150mm x 5mm Sheathed

BOX QTY

10

Industrial Acetate Screwdriver Set - 14 Pc

Designed for industrial use, this set features more Phillips® drivers than the 65.750, a Tang-Thru driver, a large square blade driver and 2 sheathed drivers. Stanley® cellulose acetate handles provide superior strength and durability. Chrome vanadium blades with precision profiled magnetised tips for lasting efficiency.

ITEM #

65.8000

CONTAINS 65.563 - 300mm x 12.0 Square Blade 65.571 - 200mm x 8.0 Tang Thru 65.585 - 200mm x #2 Phillips® 65.525 - 150mm x #3 Phillips® 65.576 - 150mm x #2 Sheathed 65.580 - 150mm x 5.0 Sheathed 65.547 - 150mm x 6.0 Standard 65.522 - 100mm x #1 Phillips® 65.542 - 100mm x 5.0 Standard 65.540 - 75mm x 4.0 Standard 65.545 - 45mm x 3.0 Standard 65.555 - 38mm x 6.0 Standard 65.523 - 45mm x #2 Phillips®

BOX QTY

10

Fix-it Screwdriver Set - 7 Pc

Stanley’s 66.752 Fix-it set includes a selection of our most popular Standard and Phillips head acetate screwdrivers for a variety of applications. The perfect set for around the home or office. ITEM #

65.752

76

CONTAINS 65.522 - 100mm x #1 Phillips® 65.524 - 150mm x #2 Phillips® 65.555 - 40mm x 6.5mm Stumpy 65.540 - 75mm x 4mm Standard 65.542 - 100mm x 5mm Standard 65.547 - 150mm x 6.5mm Standard 65.549 - 150mm x 8mm Standard

Visit us at: www.stanleytools.com

BOX QTY

10


SCREWDRIVERS Acetate Handled - Standard Tip Thru-Tang ITEM #

DESCRIPTION

BOX QTY

65.570

6.5mm Standard x 143mm

6

65.571 65.596 65.572 65.573

8mm Standard x 200mm

6 6 6 6

10mm Standard x 200mm 10mm Standard x 250mm 10mm Standard x 300mm

Acetate Handled - Standard Tip DESCRIPTION

BOX QTY

65.545

3mm Standard x 45mm

6

65.540

4mm Standard x 75mm

6

65.586

4mm Standard x 100mm

6

65.541

4mm Standard x 150mm

6

65.542

5mm Standard x 100mm

6

65.543

5mm Standard x 150mm

6

65.544

5mm Standard x 200mm

6

65.555

6mm Standard x 40mm

6

65.546

6mm Standard x 100mm

6

65.547

6mm Standard x 150mm

6

65.548

6mm Standard x 200mm

6

65.549

8mm Standard x 150mm

6

65.550

8mm Standard x 200mm

6

65.551

8mm Standard x 250mm

6

65.589

8mm Standard x 300mm

6

65.553

10mm Standard x 250mm

6

65.554

10mm Standard x 300mm

6

ACETATE SCREWDRIVERS

ITEM #

Acetate Handled - Standard Square Blade ITEM #

DESCRIPTION

BOX QTY

65.561 65.563

10mm Standard x 200mm

6 6

12mm Standard x 300mm

Acetate Handled - Phillips® ITEM #

DESCRIPTION

BOX QTY

65.520 65.521 65.582 65.522 65.583 65.523 65.584 65.524 65.585 65.525

#0 Phillips® x 60mm

6 6 6 6 6 6 6 6 6 6

#1 Phillips® x 45mm #1 Phillips® x 75mm #1 Phillips® x 100mm #1 Phillips® x 150mm #2 Phillips® x 45mm #2 Phillips® x 100mm #2 Phillips® x 150mm #2 Phillips® x 200mm #3 Phillips® x 150mm

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

77


SCREWDRIVERS

ACETATE / SHEATHED / JEWELLERS SCREWDRIVERS

Acetate Handled - Pozidriv ITEM #

DESCRIPTION

BOX QTY

65.532 65.534 65.535

#1 Pozidriv x 100mm

6 6 6

#2 Pozidriv x 150mm #3 Pozidriv x 150mm

Sheathed Screwdriver Set In Wallet - 5 Pc

Stanley® screwdrivers feature extruded high impact cellulose acetate handles. Chrome Vanadium blades with precision ground tips to ensure a secure fit. Sheathed screwdrivers preferred by electricians. ITEM #

65.559

CONTAINS

BOX QTY

5

65.575 - 150mm x #1 Phillips® 65.576 - 150mm x #2 Phillips® 65.579 - 100mm x 5mm Standard 65.580 - 150mm x 5mm Standard 65.574 - 150mm x 6mm Standard

Acetate Handled Sheathed Screwdrivers ITEM #

DESCRIPTION

BOX QTY

65.575

#1 Phillips® x 150mm

6

65.576

#2 Phillips® x 150mm

6

65.597

5mm Standard x 100mm

6

65.580

5mm Standard x 150mm

6

Carded Thrifty Screwdriver Set With Rack - 6 Pc

Versatile screwdriver set to satisfy most of your fastening needs. Features popular sizes. Ergonomically designed handle for comfortable grip. Alloy steel nickel protected blades for long life. Hardened tip for slip-resistant fit. ITEM #

60.060

CONTAINS 100mm and 150mm Standard 75mm and 150mm Cabinet 1Pt. and 2Pt. Phillips®

BOX QTY

6

Metal Jewellers Screwdriver Set - 6 Pc

Precision screwdrivers feature swivel-head handles. Bright plated shafts fluted for better grip. Hardened and tempered steel blades with blued finish to resist corrosion. Plastic storage case to index tools. ITEM #

60.039

78

CONTAINS 0pt. and 1pt. Phillips® 1.4mm Slotted 1.8mm Slotted 2.3mm Slotted 3.0mm Slotted

Visit us at: www.stanleytools.com

BOX QTY

6


SCREWDRIVERS Cushion Grip Precision Screwdriver Set - 6 Pc

Six precision screwdrivers feature swivel-head handles. Tough plastic shafts and soft cushion grip allow for greater comfort. Plastic storage case to index tools. Designed to clip into lid of 67.750 & 65.005 screwdriver sets.

66.052

CONTAINS

BOX QTY

6

0pt. and 1pt. Phillips 1.4mm Slotted 2.0mm Slotted 2.4mm Slotted 3.0mm Slotted

®

Tamperproof Bit Kit - 31 Pc

The Stanley® Tamperproof Bit Kit features a wide selection of tamperproof screwdriver bits for all your security fastening applications. Packaged in a snap lock case with clear markings on the insert to identify where each bit belongs. The bit kit also features an ergonomically designed driver for a comfortable grip and ease of use. ITEM #

68.0001

CONTAINS

BOX QTY

6

3 Torq Bits – 6, 8, 10mm 2 Tri-Wing Bits – 1, 2 3 Square Recess Bits – 1,2,3 6 Hex Bits Metric – 2, 2.5, 3, 4, 5, 6mm 6 Hex Bits AF – 5/32, 9/64, 1/8, 7/64, 3/32, 5/64 9 Torx™ Bits – T6H, T8H, T10H, T15H, T20H, T25H, T30H, T35H, T40H 1 Tri-Lobular Bit 1/4” Hex 1 Driver

Multibit Ratcheting Screwdrivers - 10 & 18 Pc Bit storage system for easy visibility, access and security. Spring loaded, hard wearing, ball bearing mechanism for quick and easy access to bits. Magnetic bit holder for quick, secure change-over of bits. Top quality, three position audible ratcheting mechanism; forward, reverse and fixed for long life efficiency. Tri-lobular, bi-material handle with textured finish for maximum torque and minimum effort. Plated for rust resistance. New 68.0102 comes with 8 original bits and 10 new security bits including Tamperproof Torx™, Tri Wing and Tamperproof Hex bits.

ITEM #

CONTAINS

PRECISION / MULTIBIT SCREWDRIVERS

ITEM #

BOX QTY

68.010

Assortment of 10 Bits #1 Square, #2 Square #1 PH, #2 PH #1 PZ, #2 PZ T10, T15 6mm and 4.5mm Slotted Bits

6

68.0102

8 Original bits: #1 Square, #2 Square #1 PH, #2 PH #1 PZ, #2 PZ 6mm and 4.5mm Slotted Bits Plus 10 Security bits:#3 Square T6H, T8H, T10H, T15H, T20H 4mm, 6mm Hex Tamperproof TW1, TW2

6

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

79


SCREWDRIVERS 4 in 1 Screwdriver

The convenience of a set of precision drivers in a one pocket tool. Ideal for toy assembly, battery compartments, eye glasses, electronics and cell phones. Non-slip textured surface has slip, crack and peel resistance. Magnetic bits attract and hold small screws. Soft and comfortable, bi-material grip. Tip sizes: #0 & #1 Phillips®, 3mm & 4mm Standard.

POCKET / BIT BRACE / HAND DRILL SCREWDRIVERS

ITEM # 66.344

80

SIZE

120mm

BOX QTY 6

Bit Brace

Holds shank bit from 1/8” to 7/16”. Steel clad ball bearing head. Chrome plated finish for rust resistance. ITEM # 02.130

SIZE 255mm length, 16mm chuck

BOX QTY 6

Hand Drill

Ideal for rapid drilling of small holes in both wood and metal as well as countersinking screw heads. Self centering 3-jaw steel chuck. Double pinion gears for smooth operation.

ITEM # 03.608

SIZE 305mm length, 8mm chuck

Visit us at: www.stanleytools.com

BOX QTY 6


SCREWDRIVERS Power Bits 1/4” Hex Shank

UNCARDED ITEMS - PHILLIPS®

UNCARDED ITEMS - PHILLIPS®

POINT SIZE ITEM # PACK QTY LENGTH(“) LENGTH(mm)

POINT SIZE ITEM # PACK QTY LENGTH(“) LENGTH(mm)

1 2 2 2 3

1 1 2 2 2 2 2 2 3 3

41099 41109 41129 41149 41119

10 10 10 10 10

1 1 2 2-1/2 1

25 25 51 64 25

CARDED ITEMS - PHILLIPS® POINT SIZE ITEM # PACK QTY LENGTH(“) LENGTH(mm) 1 2

41100 41110

1 1

1 1

25 25

41164 41194 41174 41214 41724 41224 41734 41234 41184 41244

10 10 10 10 10 10 10 10 10 10

1-15/16 2-3/4 1-15/16 2-3/4 3 3-1/2 43 6 1-15/16 2-3/4

49 70 49 70 75 89 100 152 49 70

CARDED ITEMS - PHILLIPS® POINT SIZE ITEM # PACK QTY LENGTH(“) LENGTH(mm) 1 2 2 2 2 2 3

Limited Clearance Bits - PHILLIPS®

41165 41175 41215 41225 41735 41235 41185

1 1 1 1 1 1 1

1-15/16 1-15/16 2-3/4 3-1/2 4 6 1-15/16

49 49 70 89 100 152 49

Reduced nose cone diameter for badly stamped screws POINT SIZE ITEM # PACK QTY LENGTH(“) LENGTH(mm) 2 • 41108 10 1 25

Limited Clearance Bits - PHILLIPS®

Reduced nose cone diameter for badly stamped screws POINT SIZE ITEM #

Shark Bits

The shark teeth bite into and hold the screw to eliminate “Camout”. Ideal for burred screw heads and stainless steel screws.

PACK QTY LENGTH(“) LENGTH(mm)

2 41669 10 2 41710 10 2 Suits Makita 41674•• 1 2 Suits Makita 41679••• 1 2 Suits Makita 41900•••• 10

1-15/16 3-1/2 4-9/16 5-3/16 5-11/16

49 89 117 132 145

Shark Bits

UNCARDED ITEMS - PHILLIPS® POINT SIZE ITEM # PACK QTY LENGTH(“) LENGTH(mm) 2 41809 10 1 25

The shark teeth bite into and hold the screw to eliminate “Camout”. Ideal for burred screw heads and stainless steel screws.

SUITABLE FOR PHILLIPS® SCREWS

Insert Bits 1/4” Hex Shank

CARDED ITEMS - PHILLIPS® POINT SIZE ITEM # PACK QTY LENGTH(“) LENGTH(mm) 2 41810 1 1 25

UNCARDED ITEMS - PHILLIPS® POINT SIZE ITEM # PACK QTY LENGTH(“) LENGTH(mm) 2 41814 10 1-15/16 49 2 41824 10 3-1/2 89

CARDED ITEMS - PHILLIPS® POINT SIZE ITEM # PACK QTY LENGTH(“) LENGTH(mm) 2 41815 1 1-15/16 49 2 41825 1 3-1/2 89

PRODUCT INFORMATION What’s the difference between an insert bit and a power bit? Insert bits are commonly used with a bit holder in power tool applications. This allows a fastener to be magnetically held by the bit. Power bits are placed directly into the power tool chuck. •• Suits Makita 6831 DWA Dry Wall Gun (“Limited Clearance”). ••• Suits Makita 6832 DWA Dry Wall Gun (“Limited Clearance”). •••• Suits Makita 6834 Dry Wall Screw Gun (“Limited Clearance”).

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

81


SCREWDRIVERS

SUITABLE FOR PHILLIPS® SCREWS / POZIDRIV® SCREWS

Dry Wall Bit

Preset screw head depth prevents dry wall paper breakage

UNCARDED ITEMS - PHILLIPS® CARDED ITEMS - PHILLIPS® POINT SIZE ITEM # PACK QTY LENGTH(“) LENGTH(mm) 2 41830 1 1 25

Insert Bits 5/16” Hex Shank

POINT SIZE 2 2 2 2 2

ITEM # 41314 41341 41324 41334 41339

PACK QTY 10 10 10 10 10

LENGTH(“) 1-3/4 2-1/2 3 4 6

LENGTH(mm) 45 65 76 101 152

CARDED ITEMS - PHILLIPS® POINT SIZE ITEM # PACK QTY LENGTH(“) LENGTH(mm)

UNCARDED ITEMS - PHILLIPS

®

POINT SIZE ITEM # PACK QTY LENGTH(“) LENGTH(mm) 2 3 4

41474 1 41480 1 41486 1

1-1/4 1-1/4 1-1/4

32 32 32

2 2 2 2

41315 41380 41325 41335

1 1 1 1

1-3/4 2-1/2 3 4

45 65 76 101

Power Bits 1/4” Hex Shank Suitable for Phillips® and Slotted screws

Insert Bits 5/16” Hex Shank UNCARDED ITEMS - PHILLIPS® & slotted UNCARDED ITEMS - PHILLIPS

®

POINT SIZE ITEM # PACK QTY LENGTH(“) LENGTH(mm) 2 3

41476 1 41482 1

3 3

POINT SIZE ITEM # PACK QTY LENGTH(“) LENGTH(mm) No.2 & 5mm 41664 10 2” 50

76 76

Insert Bits 1/4” Hex Shank

Power Bits 1/4” Hex Shank

UNCARDED ITEMS - POZIDRIV®

UNCARDED ITEMS - POZIDRIV®

POINT SIZE 1 2 2 3

ITEM # 41104 41114 41134 41124

PACK QTY 10 10 10 10

LENGTH(“) 1 1 2 1

LENGTH(mm) 25 25 51 25

CARDED ITEMS - POZIDRIV® POINT SIZE ITEM # PACK QTY LENGTH(“) LENGTH(mm) 1 41105 1 1 25 2 41115 1 1 25

Power Bits 1/4” Hex Shank

UNCARDED ITEMS - POZIDRIV® POINT SIZE ITEM # PACK QTY LENGTH(“) LENGTH(mm) 2 41329 10 3 76

CARDED ITEMS - POZIDRIV® POINT SIZE ITEM # PACK QTY LENGTH(“) LENGTH(mm) 2 41320 1 1-3/4 45 2 41330 1 3 76

82

Power Bits 1/4” Hex Shank

Visit us at: www.stanleytools.com

POINT SIZE ITEM # PACK QTY LENGTH(“) LENGTH(mm) 1 1 2 2 2 2 3

41169 41199 41179 41219 41229 41239 41189

10 10 10 10 10 10 10

1-15/16 2-3/4 1-15/16 2-3/4 3-1/2 6 1-15/16

49 70 49 70 89 152 49

LENGTH(“) 1-15/16 2-3/4 1-15/16 3-1/2 6

LENGTH(mm) 49 70 49 89 152

CARDED ITEMS - POZIDRIV® POINT SIZE 1 1 2 2 2

ITEM # 41170 41200 41180 41230 41240

PACK QTY 1 1 1 1 1


Insert Bits 1/4” Hex Shank

Power Bits 1/4” Hex Shank

CARDED ITEMS - SLOTTED

UNCARDED ITEMS - SLOTTED

SCREW GAUGE 10-12 14-16

BLADE ITEM WIDTH # 5/16 3/8

41300 41305

PACK QTY

LENGTH (“)

LENGTH (mm)

SCREW GAUGE

BLADE ITEM WIDTH #

PACK QTY

LENGTH (“)

LENGTH (mm)

1 1

1 1-1/2

25 38

5-6 5-6 8-10 8-10

1/4 1/4 5/16 5/16

10 1 10 1

1-15/16 2-3/4 1-15/16 2-3/4

49 70 49 70

41259 41279 41264 41284

CARDED ITEMS - SLOTTED

Power Bits 1/4” Hex Shank Suitable for Slotted and Phillips® screws

SCREW GAUGE

BLADE ITEM WIDTH #

PACK QTY

LENGTH (“)

LENGTH (mm)

5-6 5-6 5-6 8-10 12-14

1/4 1/4 1/4 5/16 3/8

1 10 1 1 1

1-15/16 1-15/16 2-3/4 1-15/16 1-15/16

49 49 70 49 49

41260 41261 41280 41265 41270

UNCARDED ITEMS - PHILLIPS® & slotted POINT SIZE ITEM # PACK QTY LENGTH(“) LENGTH(mm) No.2 & 5mm 41664 10 2” 50

Insert Bits 1/4” Hex Shank Metric

UNCARDED ITEMS - HEX

UNCARDED ITEMS - HEX HEX SIZE 3mm 4mm 5mm 6mm

ITEM # 41038 41040 41042 41044

PACK QTY 1 1 10 1

LENGTH(“) 1 1-5/16 1-5/16 1-5/16

LENGTH(mm) 25 33 33 33

CARDED ITEMS - HEX HEX SIZE 5mm

Insert Bits 1/4” Hex Shank Metric

HEX SIZE

ITEM # PACK QTY LENGTH(“) LENGTH(mm)

5mm

41595 10

1-15/16

50

CARDED ITEMS - HEX HEX SIZE

ITEM # PACK QTY LENGTH(“) LENGTH(mm)

5mm

41600 1

1-15/16

SUITED FOR SLOTTED SCREWS / IN-HEX SCREWS

SCREWDRIVERS

50

ITEM # PACK QTY LENGTH(“) LENGTH(mm) 41160 1 1-5/16 33

Power Bits 1/4” Hex Shank Suitable for Phillips® and In-hex screws

UNCARDED ITEMS - PHILLIPS® & HEX POINT SIZE ITEM # PACK QTY LENGTH(“) LENGTH(mm) No.2 & 5mm 41684 10

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

2-1/2

65

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

83


SCREWDRIVERS Insert Bits 1/4” Hex Shank

Power Bits 1/4” Hex Shank

suitable for square recess screws / bit holders

UNCARDED ITEMS - SQUARE (ROBERTSON) SCREW SIZE 1/16” 3/32” 1/8” 9/64”

BIT SIZE 0 1 2 3

ITEM # 41402 41404 41409 41411

PACK QTY 1 1 1 1

LENGTH (“) 1 1 1 1

UNCARDED ITEMS - SQUARE (ROBERTSON) LENGTH (mm) 25 25 25 25

CARDED ITEMS - SQUARE (ROBERTSON)

SCREW SIZE

BIT SIZE

ITEM #

PACK QTY

LENGTH (“)

LENGTH (mm)

1/16” 3/32” 1/8” 1/8”

0 1 2 2

41412 41414 41419 41431

1 1 1 1

1-15/16 1-15/16 1-15/16 2-3/4

49 49 49 70

CARDED ITEMS - SQUARE (ROBERTSON)

SCREW SIZE

BIT SIZE

ITEM #

PACK QTY

LENGTH (“)

LENGTH (mm)

SCREW SIZE

BIT SIZE

ITEM #

PACK QTY

LENGTH (“)

LENGTH (mm)

3/32” 1/8”

1 2

41405 41410

1 1

1 1

25 25

3/32” 3/32” 3/32” 1/8” 1/8” 1/8” 9/64” 9/64”

1 1 1 2 2 2 3 3

41415 41835 41795 41420 41840 41875 41790 41880

1 1 1 1 1 1 1 1

1-15/16 3-1/2 6 1-15/16 3-1/2 6 3-1/2 6

49 89 152 49 89 152 89 152

Power Bits 1/4” Hex Shank

UNCARDED ITEMS - SQUARE (ROBERTSON) SCREW SIZE

BIT SIZE

ITEM #

PACK QTY

LENGTH (“)

LENGTH (mm)

3/32” 1/8”

1 2

41424 41429

10 10

1-3/4 1-3/4

45 45

CARDED ITEMS - SQUARE (ROBERTSON) SCREW SIZE

BIT SIZE

ITEM #

PACK QTY

LENGTH (“)

LENGTH (mm)

3/32” 1/8”

1 2

41425 41430

1 1

1-3/4 1-3/4

45 45

To Drive Bits 1/4” Hex Shank

To Drive Bits 1/4” Hex Shank Magnetic

UNCARDED ITEMS SCREW SIZE

BIT SIZE

41552

1

ITEM # 3/8”

PACK QTY

LENGTH (“) 1-1/4

LENGTH (mm) 32

Quick Release UNCARDED ITEMS HEX SHANK 1/4” 1/4” 1/4”

ITEM # PACK QTY LENGTH(“) LENGTH(mm) 41346 1 2 51 41343 1 2.39 61 41344 1 3 76

CARDED ITEMS HEX SHANK ITEM # PACK QTY LENGTH(“) LENGTH(mm) 1/4” 41345 1 3 76

TORX® is a registered trademark of Camcar Division of Textron *These parts have no connection with the proprietors of the registered trademarks.

84

Visit us at: www.stanleytools.com


SCREWDRIVERS Tamperproof Insert Bits 1/4” Hex Shank

Insert Bits 15/16” Hex Shank

Suitable for Torx® screws

UNCARDED ITEMS - TORX®

SIZE

ITEM #

PACK A QTY (“)

A LENGTH (mm) (“)

LENGTH (mm)

T-10 T-15 T-20 T-25 T-27 T-30 T-40 T-45

41442 41446 41450 41454 41458 41462 41466 41704

1 1 1 1 1 1 1 1

2.72 3.25 3.84 4.39 4.95 5.49 6.60 7.77

25 25 25 25 25 25 25 25

0.107 0.128 0.151 0.173 0.195 0.216 0.260 0.306

1 1 1 1 1 1 1 1

SIZE

ITEM #

PACK A QTY (“)

T-50

41496

1

A LENGTH (mm) (“)

0.346 8.79 1-1/4

LENGTH (mm) 32

CARDED ITEMS - TORX® SIZE

ITEM #

PACK A QTY (“)

A LENGTH (mm) (“)

LENGTH (mm)

T-15 T-20 T-25 T-27

41705 41706 41707 41708

1 1 1 1

3.25 3.84 4.39 4.95

25 25 25 25

0.128 0.151 0.173 0.195

1 1 1 1

Tamperproof Insert Bits 1/4” Hex Shank

Power Bits 1/4” Hex Shank

UNCARDED ITEMS - TORX®

UNCARDED ITEMS - TORX® SIZE

ITEM #

PACK A QTY (“)

A LENGTH (mm) (“)

T-7 T-8 T-9 T-10 T-15 T-20 T-25 T-27 T-30

41856 41858 41860 41862 41864 41866 41868 41870 41872

3 3 3 3 3 3 3 3 3

LENGTH (mm) 75 75 75 75 75 75 75 75 75

SIZE

ITEM #

PACK A QTY (“)

A LENGTH (mm) (“)

T-5 T-6

41852 41854

3 3

LENGTH (mm) 75 75

suitable for torx® screws / tamperproof

UNCARDED ITEMS - TORX®

Tamperproof Insert Bits 1/4” Hex Shank Suitable for Tri-Lobular screws

UNCARDED ITEMS - TRI-LOBULAR® SIZE

ITEM #

PACK A QTY (“)

41603 1

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

0.16

A LENGTH (mm) (“)

LENGTH (mm)

4.06

25

1

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

85


SCREWDRIVERS Insert Bits 1/4” Hex Shank

PowerDrive® contacts the flat side walls of the hex not the corners

UNCARDED ITEMS HEX SIZE 1/4 5/16 3/8

ITEM # 41349 41354 41359

nutsetters / extensions

ITEM # 41350 41355 41360

LENGTH(“) 1-11/16 1-11/16 1-3/4

LENGTH(mm) 42 42 45

PACK QTY 1 1 1

LENGTH(“) 1-11/16 1-11/16 1-3/4

LENGTH(mm) 42 42 45

ITEM # 41364 41369 41374

PACK QTY 5 5 5

LENGTH(“) 2-3/4 2-3/4 2-3/4

LENGTH(mm) 69 69 69

HEX SIZE 1/4 5/16 5/16 3/8

ITEM # 41365 41370 41885 41375

PACK QTY 1 1 1 1

LENGTH(“) 2-3/4 2-3/4 6 2-3/4

LENGTH(mm) 69 69 150 69

5/16” Hex Shank

UNCARDED ITEMS ITEM # 41564 41566 41599 41666

HEX SIZE 1/4 5/16 3/8

CARDED ITEMS

1/4” Hex Shank

SQ DR (MALE) 1/4 1/4 3/8 1/2

PowerDrive® contacts the flat side walls of the hex not the corners

UNCARDED ITEMS PACK QTY 5 5 5

CARDED ITEMS HEX SIZE 1/4 5/16 3/8

1/4” Hex Shank - Magnetic

UNCARDED ITEMS PACK QTY 1 1 1 1

LENGTH(“) 2 3 2 2-3/4

LENGTH(mm) 51 76 51 70

HEX SIZE

ITEM # PACK QTY LENGTH(“) LENGTH(mm)

1/4”

41562 1

1

25

Flexible Holder For Bits*

Hex To Square Adaptor

For use with any 1/4” drive sockets Adapts 41344, 41346, 41348, 41596, 41307

UNCARDED ITEMS HEX SIZE

ITEM # PACK QTY LENGTH(“) LENGTH(mm)

1/4”

41562 1

1

25

CARDED ITEMS HOLE SIZE ITEM # PACK QTY LENGTH(“) LENGTH(mm) 1/4”

41310

*Bits not included

86

Visit us at: www.stanleytools.com

1

3

76


SCREWDRIVERS Assortments

1pc of 41294 3/16” Slotted 1pc of 41299 5/16” Slotted 1pc of 41304 3/8” Slotted 1pc of 41309 Bit Holder

1pc of 41099 No. 1 Phillips® 1pc of 41109 No. 2 Phillips® 1pc of 41119 No. 3 Phillips® ITEM # 41385

DESCRIPTION Assortments

Assortments

1pc of 41259 1/4” Slotted 1pc of 41264 5/16” Slotted 1pc of 41309 Bit Holder

1pc of 41164 No. 1 Phillips® 1pc of 41174 No. 2 Phillips®

DESCRIPTION Assortments

Assortments

1pc of 41294 3/16” Slotted 1pc of 41299 5/16” Slotted 1pc of 41344 Magnetic Bit Holder 1pc of 41309 Bit Holder

1pc of 41099 No. 1 Phillips® 1pc of 41109 No. 2 Phillips® 1pc of 41119 No. 3 Phillips® ITEM # 41395

Assortments

DESCRIPTION Assortments

1pc of 41349 1/4” Hex Magnetic Nutsetter 1pc of 41354 5/16” Hex Magnetic Nutsetter ITEM # 41400

Bulk Bits

ITEM # 41390

1pc of 41359 3/8” Hex Magnetic Nutsetter 1pc of 41309 Bit Holder DESCRIPTION Assortments

Economy Bulk Pack 10 only 41109 No. 2 Phillips® ITEM # 41111

DESCRIPTION Economy Bulk Pack

Economy Bulk Pack 10 only 41314 No. 2 Phillips® ITEM # 41316

DESCRIPTION Economy Bulk Pack

Economy Bulk Pack 10 only 41324 No. 2 Phillips® ITEM # 41326

DESCRIPTION Economy Bulk Pack

Economy Bulk Pack 1pc of 41234 No. 2 Phillips® 2pcs of 41239 No. 2 Pozidriv® 1pc of 41795 SQ 3/32 2pcs of 41875 SQ 1/8 1pc of 41309 Bit Holder ITEM # 41800

DESCRIPTION Economy Bulk Pack

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

87


SCREWDRIVERS 8 Pc Metric Hex Key Set Contains: 1.5, 2, 2.5, 3, 4, 5, 6, 8mm ITEM # 69.264

DESCRIPTION Hex Key Set

9 Pc A/F Hex Key Set

Contains: 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4” ITEM # 69.265

DESCRIPTION Hex Key Set

8 Pc Torx Hex Key Set

Contains: T9, T10, T15, T20, T25, T27, T30, T40

Hex Keys

ITEM # 69.266

DESCRIPTION Hex Key Set

10 Pc Metric Hex Key Set

Contains: 1.5, 2, 2.5, 3, 4, 5, 5.5, 6, 8, 10mm Packaged in wallet ITEM # 69.331

DESCRIPTION Hex Key Set

10 Pc A/F Hex Key Set

Contains: 1/16, 5/64, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8” Packaged in wallet ITEM # 69.332

DESCRIPTION Hex Key Set

30 Pc Hex Key Set

30 PC Ball End Hex Key Set Metric sizes: 1.5 - 10mm AF sizes: 1/16 - 3/8” Packaged in plastic storage case & double blister ITEM # 69.335

88

DESCRIPTION Hex Key Set

Visit us at: www.stanleytools.com


Fastening Stanley® Innovation Advantage – Easy Squeeze Mechanism You shouldn’t have to be Hercules to drive a staple into a piece of plywood. Stanley® Easy Squeeze technology delivers greater driving power while being far easier and less fatiguing to operate. New sturdy plastic packaging reduces staple breakage and protects staples from the elements.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

89


FASTENERS 18 Ga 25mm Stapler

Multi-directional Exhaust deflector. Slender Nose design, easy to focus on the work piece. Depth Adjustment for precision nailing. Convenient Bottom-Load Magazine. Driver Guide Insert with Magazine Cover design for easy jam removal. Cushioned Rubber Grip provides greater comfort & less fatigue. Kit includes blow molded carry case, hex key, lube oil and staples. Available Spare Parts Z167022: O-Ring Kit, Z167024: Bumper Kit COMPATIBLE BOSTITCH速 FASTENERS SX Series Brads, 18 Ga SX5035-12MM SX5035-16MM SX5035-18MM5M SX5035-22MM

PNEUMATIC FASTENERS

SX5025-25MM

ITEM #

TRIGGER

DIMENSIONS

WEIGHT

PRESSURE

MAG CAPACITY

SFS100K

Sequential

25 x 6 x 20cm

0.99kg

70-120 psi

100

18 Ga C-1 Bradder

Multi-directional Exhaust deflector. Cushioned Rubber Grip provides greater comfort & less fatigue. Depth Adjustment for precision nailing. Split Back Plate with Magazine Cover design for freeing jams easily. Slender Nose for tight spaces. Visual Reload Indicator. No Mar Tip for soft wood. Storage compartment for the No Mar Tip. Kit includes blow molded carry case, oil, hex key and brads. Available Spare Parts Z166819: O-RING KIT, Z166820: Bumper Kit, Z166818: No Mar Tip COMPATIBLE BOSTITCH速 FASTENERS C1 Series Brads, 18 Ga

90

C-115 (15mm)

BT1335B (35mm)

C-120 (20mm)

BT1340B (40mm)

C-125 (25mm)

BT1345B (45mm)

C-130 (30mm)

BT1350B (50mm)

ITEM #

TRIGGER

DIMENSIONS

WEIGHT

PRESSURE

MAG CAPACITY

SBN200K

Sequential

29 x 6 x 25cm

1.3kg

70-120 psi

100

Visit us at: www.stanleytools.com


FASTENERS 16 Ga C Bradder

Side mounted Quick Release mechanism ensures fast & easy removal of jammed fasteners. Multi-directional Exhaust deflector. No Mar Tip for soft wood. Storage compartment for the No Mar Tip. Cushioned Rubber Grip provides greater comfort & less fatigue. New Open Magazine design allows for quicker checking of contents and easier cleaning. Depth Adjustment for precision nailing. Available Spare Parts Z166827: O-Ring Kit, Z166828: Bumper Kit, Z166826: No Mar Tip COMPATIBLE BOSTITCH® FASTENERS C45 (45mm)

C32 (32mm)

C50 (50mm)

C38 (38mm)

C64 (64mm)

ITEM #

TRIGGER

DIMENSIONS

WEIGHT

PRESSURE

MAG CAPACITY

SFN250K

Sequential

30 x 8 x 28cm

1.7kg

70-120 psi

100

15 Ga DA Bradder

Multi-directional Exhaust deflector. Cushioned Rubber Grip provides greater comfort & less fatigue. Depth Adjustment for precision nailing. Quick release nose for easy jam clearing. Angled magazine to get in to tight spaces and corners. Rear load magazine, lightweight magazine. No Mar Tip for soft wood. Kit includes blow moulded carry case, oil, hex key and DA brads. Available Spare Parts Z166823: O-Ring Kit, Z166824: Bumper Kit COMPATIBLE BOSTITCH® FASTENERS* DA Series Brads, 15 Ga AS-DA15 (32mm)

AS-DA15-GAL (32mm)

AS-DA17 (38mm)

AS-DA17-GAL (38mm)

AS-DA19 (45mm)

AS-DA19-GAL (45mm)

AS-DA21 (50mm)

AS-DA21-GAL (50mm)

AS-DA23 (57mm)

AS-DA23-GAL (57mm)

AS-DA25 (63mm)

AS-DA25-GAL (63mm)

* Also Compatible with SENCO® and HITACHI® DA Style Bradders

ITEM #

TRIGGER

DIMENSIONS

WEIGHT

PRESSURE

MAG CAPACITY

SDA250K

Sequential

33 x 10 x 33cm

1.9kg

70-120 psi

100

PNEUMATIC FASTENERS

C Series Brads, 16 Ga C25 (25mm)

50 - 90mm (33º) Framer

3600 Exhaust deflector. Cushioned Rubber Grip provides greater comfort & less fatigue. Depth Adjustment for precision nailing. Angled air inlet design. No-Mar removable rubber foot to protect the work surface Aggressive ToeNailing teeth grip timber for slip-free toe skewed nailing. Available Spare Parts Z166819: O-Ring Kit, Z166820: Bumper Kit, Z166818: No Mar Tip COMPATIBLE BOSTITCH® FASTENERS* 33˚ Angle Stick Nails, 2.87mm - 3.33mm SP50X287-3M

SP75X306-3MHDG

SP50X287-3M-HDG

SR75X306-3M

SP75X306-3M

SP90X333-3M

ITEM #

TRIGGER

DIMENSIONS

WEIGHT

PRESSURE

MAG CAPACITY

SN9033K

Sequential

53 x 14.2 x 36.4cm

3.2kg

70-120 psi

64

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

91


FASTENERS Light Duty Staple Gun

TRA200 Series

Pinch point free design – improved safety feature. Lock down handle – takes up less space in a toolbox. Accepts light duty 6mm, 8mm & 10mm multipurpose staples. Easy access staple insertion – faster loading.

ITEM # TR45

PRODUCT DIMENSIONS 15cm x 2cm x 8cm

BOX QTY 5

Sharp Shooter Heavy Duty Stapler

TRA700 Series

CONSUMER FASTENERS

Aluminum cast housing – greater durability. Easy push handle – easier to use. Lock down handle – takes up less space in a toolbox. Easy access staple insertion – faster loading. Anti-jam design. ITEM # TR150

PRODUCT DIMENSIONS 18cm x 2.5cm x 13cm

BOX QTY 6

Sharp Shooter Heavy Duty Stapler

TRA700 Series

Aluminum cast housing – greater durability. Easy push handle – easier to use. Lock down handle – takes up less space in a toolbox. Easy access staple insertion – faster loading. Anti-jam design. Hi-low power switch feature. ITEM # TR150HL

PRODUCT DIMENSIONS 19cm x 2.5cm x 13cm

BOX QTY 6

Combination Stapler/Nailer

Accepts Staples and Brads. Multiple applications. Ergonomic – soft grip handle and head. Aluminum cast housing – greater durability. Lock down handle – takes up less space in a toolbox. Easy push handle – easier to use. Easy access staple insertion – faster loading. Anti-jam design. Hi-low power switch feature. ITEM # TR250

92

PRODUCT DIMENSIONS 19cm x 2.5cm x 13cm

Visit us at: www.stanleytools.com

BOX QTY 6

BRADS

TRA700 Series


FASTENERS Electric Stapler/Nailer

Accepts Staples and Brads – multiple applications. Heavy duty design with more driving power. Adjustable high/low power knob for variable power output. All metal drive channel for better penetration. Attached fastener tray for fast, easy loading. Ergonomic – soft grip handle & trigger. Flush nose design. 2.4m extra long power cord! Reduces the need for extension leads. Anti-Jam design.

ITEM # TRE550

PRODUCT DIMENSIONS 19cm x 3cm x 20cm

BRADS

TRA700 Series

BOX QTY 4

FatMax® XtremeTM Hammer Tacker with Blade

ITEM # PHT350

PRODUCT DIMENSIONS 30cm x 3.5cm x 6cm

TRA700 Series

6, 8 or 10mm

BOX QTY 6

Hammer Tacker

Professional heavy duty hammer tacker. Steel construction – greater durability. Rubber moulded grip for added comfort. Easy access staple insertion – faster loading. Loads 2 full strips of staples.

TRA700 Series

6, 8 or 10mm

ITEM # PHT150C

PRODUCT DIMENSIONS 30cm x 3.5cm x 6cm

BOX QTY 6

CONSUMER FASTENERS

Staple down material, then cut away any excess with blade. Auto retractable built in blade. Fast staple loading, Replaceable blade switch and non-slip rubber grip.

Consumer Fastening SKU Listing ITEM #

Description

TRA204T TRA205T TRA206T TRA704T TRA705T TRA706T TRA708T TRA709T SWKBN050 SWKBN625

6mm Light Duty Staples Pk 1000 8mm Light Duty Staples Pk 1000 10mm Light Duty Staples Pk 1000 6mm H-Duty Staples Pk 1000 8mm H-Duty Staples Pk 1000 10mm H-Duty Staples Pk 1000 12mm H-Duty Staples Pk 1000 14mm H-Duty Staples Pk 1000 12mm Brads Pk 1000 TR250/TRE550 15mm Brads Pk 1000 TR250/TRE550

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

Box Qty 7 6 5 7 6 5 4 4 10 10

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

93


FASTENERS Comparison Chart BRAND:

MODEL:

DESCRIPTION:

COMPATIBLE WITH:

MANUAL STAPLERS Arrow

T50

Arrow Heavy Duty T50 Tacker Gun

TR150, TR150HL, TR250, 700 Series (Blue) Staples, 700 Series SS (Blue) Staples

Arrow

T55

Arrow Medium Duty T55 Stapler

TR150, TR150HL, TR250, 700 Series (Blue) Staples, 700 Series SS (Blue) Staples

Arrow

JT21M

Arrow Light Duty Stapler

TR45, 200 Series (Green) Staples

Arrow

T27

Arrow T27 Light Duty Stapler

TR45, 200 Series (Green) Staples

Rapid

R34 Pro

Rapid R34 Proline Ergonomic Tacker

TR150, TR150HL, TR250, 700 Series (Blue) Staples, 700 Series SS (Blue) Staples

Rapid

R14 Pro

Rapid R14 Proline Ergonomic Tacker

TR150, TR150HL and/or TR250, 700 Series (Blue) Staples, 700 Series Ss (Blue) Staples

Rapid

R64 Pro

Rapid R64 Ergonomic Combo

TR150, TR150HL and/or TR250, 700 Series (Blue) Staples, 700 Series SS (Blue) Staples

CONSUMER FASTENERS

HAMMER TACKERS Rapid

R11

Rapid Pro R11 Hammer Tacker

700 Series (Blue) Staples, 700 Series SS (Blue) Staples

Arrow

Ht30s

Arrow Ht30s Light Duty Hammer Tacker

700 Series (Blue) Staples, 700 Series SS (Blue) Staples

Arrow

Ht50

Arrow Ht50 Tomahawk Heavy Duty Hammer Tacker

700 Series (Blue) Staples, 700 Series SS (Blue) Staples

Arrow

Ht65

Arrow Ht65 Mighty Mo Extra Heavy Duty Hammer Tacker

700 Series (Blue) Staples, 700 Series SS (Blue) Staples

Rapid R114 Electric Stapler

TRE500, 700 Series (Blue) Staples, 700 Series SS (Blue) Staples

ELECTRIC STAPLERS: Rapid

R114

Contractor Grade Riveter

Rugged die-cast metal construction ensures long working life especially in damp working conditions. Especially suited for stainless steel rivets in marine applications. Equipped with removable ejector spring for easy ejection of rivet stems. ITEM # MR100CG

CONTAINS

Heavy duty riveter c/w 4 nosepieces for 1/8”, 3/32”, 3/16”, 5/32” rivets

BOX QTY 5

Heavy Duty Riveter

Versatile tool for joining sheet metal, fabric, leather, plastic parts, etc. Spring loaded handle ejects rivets stem. All steel body with non-slip grip and wrench for changing nosepieces.

ITEM # 69.799

94

SIZE

Heavy duty riveter c/w 4 nosepieces for 1/8”, 3/32”, 3/16”, 5/32” rivets

Visit us at: www.stanleytools.com

BOX QTY 6


Illumination Stanley® Innovation Advantage – Hands free, durable and impact resistant Innovative Tripod design offers hands-free convenience. Weather-resistant anodized aluminum space frame construction makes it perfect for a project or emergency situation. Multi-position head focuses light precisely where it’s needed and provides an extended run time of over 200 hours on 9 AA batteries. The low-power indicator light flashes so you’re never caught in the dark. Impact resistant design that is durable with a graphite ABS composite head and shatter-resistant polycarbonate lens.

Innovative Tripod design offers hands-free convenience. Weather-resistant anodized aluminum space frame construction. Perfect for a project or emergency situation. Multi-position head focuses light precisely where it’s needed. Provides an extended run time of over 200 hours on 9 AA batteries. Low-power indicator light flashes so you’re never caught in the dark. Impact resistant design that is durable with a graphite ABS composite head and shatter-resistant polycarbonate lens. Runs on 3,6 or 9 AAA batteries (not included).

Tripod Torch

Powered by six bright white LED bulbs. ITEM # 95.112

BOX QTY 4

MaxLife® 369™ Mini Tripod Flashlights Mini Tripod Torch

On/off switch. Swivel key ring for convenience. Battery included. Ships in a fully assembled 10 count clipstrip. ITEM # 95.113

BOX QTY 10

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

TRIPOD & MINI TRIPOD TORCHES

MaxLife® 369™ Tripod Flashlight

95


Mechanics Tools Stanley® Innovation Advantage – Anti Locking + Anti Slip

All spanners and sockets feature the MaxDrive™ fastening system. It allows for greater contact with fasteners, especially on worn or rounded fasteners.

96

Visit us at: www.stanleytools.com


MECHANICS TOOLS 30 Pc DIY 1/4” Pear Head Drive Mechanics Set 1/4” Drive Pear Head Ratchet – Quick Ratchet Extension 75mm (3”) Universal Joint Socket 6pt (6-12mm), 12pt (6-12mm), 6pt (3/16-9/16”), 12pt (3/8-1/2”)

ITEM #

description

BOX QTY

92.804

30pce 1/4” Pear Head Drive Socket Set

1

50 Pc DIY 1/4 & 3/8” Pear Head Drive Mechanics Set

3/8” Drive Pear Head Ratchet – Quick Ratchet Extension 75mm (3”) Adapter (1/4” Drive) Socket 6pt (8-19mm) 1/4” Drive Socket 12pt (6-12mm), 6pt (3/16-9/16”), 12pt (3/81/2”) Bit Holder, Spinner Handle Bit Drivers - PH (0-3), Slot (3-5”), Hex (3/32-5/32”) ITEM #

description

BOX QTY

92.808

50pce 1/4” & 3/8” Pear Head Drive Socket Set

1

60 Pc DIY 1/4 & 3/8” Drive Mechanics Set 3/8” Drive Pear Head Ratchet – Quick Ratchet Extension Bar 75mm (3”), 150mm (6”) Adapter (1/4” Drive) Spark Plug Socket (6pt) (5/8”) Sockets 12pt SAE (3/8-3/4”), 6pt SAE (3/8-3/4”), 6pt Metric (8-19mm) 1/4” Drive Spinner Handle, Extension Bar (50mm) Sockets SAE 12pt (3/16-7/16”), 6pt SAE (3/16-1/2”), 6pt Metric (4-13mm) Bit Holder, Spinner Handle Bit Drivers - PH (0-3), Slot (3-5”), Hex (3/32-5/32”) ITEM #

description

BOX QTY

92.809

60pce 1/4” & 3/8” Drive Socket Set

1

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

97


MECHANICS TOOLS 85 Pc DIY 1/4 & 3/8” Drive Mechanics Set 3/8” Drive Pear Head Ratchet – Quick Ratchet Extension Bar 75mm (3”) Spark Plug Socket 6pt (5/8”) Deep Sockets 6pt SAE (3/8-9/16”), 6pt Metric (10-13mm) Sockets 6pt SAE (1/4-5/8”), 6pt Metric (6-17mm) 1/4” Drive Pear Head Ratchet Extension Bar 75mm (3”), 150mm (6”) Deep Sockets 6pt SAE (5/32-1/2”), 6pt Metric (4-13mm) Sockets 6pt SAE (3/16-1/2”), 6pt Metric (4-14mm) Bit Holder, Spinner Handle 25mm Bit Set – Slot (3-5), PH (0-2), Hex (3/32-5/32”) ITEM #

description

BOX QTY

94.375

85pce 1/4 & 3/8” Drive Socket Set

1

115 Pc DIY 1/4 & 3/8” Drive Mechanics Set 3/8” Drive Pear Head Ratchet – Quick Ratchet Extension Bar 75mm (3”) Spark Plug Socket 6pt (5/8-13/16”) Deep Sockets 6pt SAE (3/8-9/16), 6pt Metric (10-13mm) Sockets 6pt SAE (1/4-11/16”), 6pt Metric (6-17mm) 1/4” Drive Pear Head Ratchet Extension Bar 75mm (3”), 150mm (6”) Deep Socket 6pt SAE (5/32-1/2”), 6pt Metric (4-13mm) Sockets 6pt SAE (3/16-1/2), 6pt Metric (4-14mm) Bit Holder, Spinner Handle, Hex Keys (1/16-1/4”) 25mm Bit Set – PH (0-3), Slot (4-7), SQ (1-3), Hex (3/32-1/4) Combination Wrenches SAE (3/8-5/8”), Metric (9-13mm) ITEM #

description

BOX QTY

94.374

115pce 1/4” & 3/8” Drive Socket Set

1

145 Pc DIY 1/4 & 3/8” Drive Mechanics Set 3/8” Drive Pear Head Ratchet – Quick Release 75mm (3”) Extension Bar, Universal Joint Spark Plug Socket 6pt (5/8-13/16”) Deep Sockets 6pt SAE (3/8-9/16”), 12pt SAE (3/8-1/2), 6pt Metric (10-13mm) Sockets 6pt SAE (1/4-11/16”), 6pt Metric (6-17mm) 1/4” Drive Pear Head Ratchet – Quick Release 150mm (6”) Extension Bar Deep Sockets 6pt SAE (3/16-1/2”), 6pt Metric (4-13mm) Sockets 6pt SAE (7/32-1/2”), 6pt Metric (6-13mm) Bit Holder, Spinner Handle Nut Drivers (10pce) Screwdriver Bit Set (30pce) Hex Keys 8pce SAE, 8pce Metric Combination Wrenches SAE (3/8-11/16”), Metric (9-14mm)

98

ITEM #

description

BOX QTY

94.376

145pce 1/4” & 3/8” Drive Socket Set

1

Visit us at: www.stanleytools.com


MECHANICS TOOLS 220 Pc Master Metric & A/F Tool Kit

6 Drawer Stanley® toolbox 2 Drawer Stanley® intermediate chest 21 Pc A/F & Metric 1/4” drive socket set 42 Pc A/F & Metric 3/8” drive socket set 24 Pc A/F & Metric ROE spanner set 100, 150, 200 and 300mm adjustable wrenches 43 Pc A/F & Metric 1/2 drive socket accessories 10 Pc hex key set in wallet metric 10 Pc hex key set in wallet imperial 31 Pc bit kit with driver 10 Pc cushion grip screwdriver set 6 Pc precision ergonomic screwdriver set Ball pein hammer - wooden 450 g (16 oz) 7 Pc punch and chisel set Maxsteel™ diagonal cutting pliers 190mm Maxsteel™ combination pliers 200mm Maxsteel™ long nose pliers with cutter 200mm Plier - Multigrip 250 mm Plier - Locking (curved jaw) 250 mm Plier - Circlip external straight 175mm Plier - Circlip internal straight 175mm Hacksaw - Steel frame yellow handle Retractable cushion grip Knife Stanley® yellow tape 13mm x 3m/10ft

DESCRIPTION 220 Pc Master Metric & A/F Tool Kit

192 Pc Master Metric & A/F Tool Kit Stanley® 2 door wall cabinet 21 Pc A/F & Metric 1/4” drive socket set 46 Pc A/F & Metric 3/8” drive socket set 43 Pc A/F & Metric 1/2” drive socket set 11 Pc Metric ROE spanner set 11 Pc A/F ROE spanner set 100, 150, 250 & 300mm adjustable wrenches 10 Pc hex key set in wallet METRIC 10 Pc hex key set in wallet IMPERIAL 14 Pc screwdriver Set 6 Pc precision ergonomic screwdriver Set Ball pein hammer - wooden 450 g (16 oz) 7 Pc punch and chisel set

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

TOOL KITS

ITEM # 89.600

Maxsteel™ diagonal cutting pliers 190mm Maxsteel™ combination pliers 200mm Maxsteel™ long nose pliers with cutter 200mm Plier - Multigrip 250 mm Plier - Locking (curved jaw) 250 mm Plier - Circlip external straight 175mm Plier - Circlip internal straight 175mm Hacksaw - Steel frame yellow handle Stanley® yellow tape 25mm x 8m/26ft ITEM # 89.530

DESCRIPTION 192 Pc Metric & A/F Tool Kit

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

99


MECHANICS TOOLS 165 Pc Mechanics Metric & A/F Tool Kit

6 Drawer Stanley® toolbox 40 Pc comb A/F & Metric 1/4” & 3/8” drive socket set 43 Pc comb A/F & Metric 1/2” drive socket set 11 Pc Metric ROE spanner set 11 Pc A/F ROE spanner set ROE spanners 18mm, 24mm and 15/16” 100, 150mm & 300mm adjustable wrenches 10 Pc hex key set in wallet METRIC 10 Pc hex key set in wallet IMPERIAL 10 Pc cushion grip screwdriver Set 6 Pc precision ergonomic screwdriver Set Ball pein hammer - wooden 450 g (16 oz) 7 Pc punch and chisel set Maxsteel™ diagonal cutting pliers 190mm Maxsteel™ combination pliers 200mm Maxsteel™ long nose pliers with cutter 200mm Plier - Multigrip 250 mm Plier - Locking (curved jaw) 250 mm Circlip Plier ext/straight and int/straight Hacksaw - Steel frame yellow handle Retractable cushion grip knife Stanley® yellow tape 13mm x 3m/10ft

TOOL KITS

ITEM # 89.534

100

DESCRIPTION 165 Pc Mechanics Metric & A/F Tool Kit

154 Pc Mechanics Metric & A/F Tool Kit 5 Tray cantilever Stanley® toolbox 37 Pc comb A/F & Metric 1/4” & 3/8” drive socket set 43 Pc comb A/F & Metric 1/4” & 1/2” drive socket set 11 Pc Metric ROE spanner set 11 Pc A/F ROE spanner set 100, 150, 250mm adjustable wrenches 10 Pc hex key set in wallet METRIC 10 Pc hex key set in wallet IMPERIAL 7 Pc screwdriver Set 6 Pc precision ergonomic screwdriver Set Ball pein hammer - wooden 450 g (16 oz) 7 Pc punch and chisel set Maxsteel™ diagonal cutting pliers 190mm

Visit us at: www.stanleytools.com

Maxsteel™ combination pliers 200mm Maxsteel™ long nose pliers with cutter 200mm Plier - Multigrip 250 mm Plier - Locking (curved jaw) 250 mm Circlip Plier ext/straight and int/straight Hacksaw - Steel frame yellow handle Retractable cushion grip knife Stanley® yellow tape 25mm x 8m/26ft

ITEM # 89.532

DESCRIPTION 154 Pc Metric & A/F Tool Kit


MECHANICS TOOLS 118 Pc Master Metric & A/F Tool Kit

Stanley® 3 Drawer toolbox 21 Pc A/F & Metric 1/4” drive socket set 38 Pc A/F & Metric 1/2” drive socket set 100, 150 & 250mm adjustable wrench 10 Pc hex key set in wallet METRIC 10 Pc hex key set in wallet IMPERIAL 14 Pc screwdriver Set 6 Pc precision ergonomic screwdriver Set Ball pein hammer - Wooden 450 g (16 oz) 7 Pc punch and chisel set Maxsteel™ diagonal cutting pliers 190mm Maxsteel™ combination pliers 200mm Maxsteel™ long nose pliers with cutter 200mm Plier - Multigrip 250 mm Plier - Locking (curved jaw) 250 mm Plier - Circlip external straight 175mm Plier - Circlip internal straight 175mm Hacksaw - Steel frame yellow handle Stanley® yellow tape 25mm x 8m/26ft DESCRIPTION 118 Pc Metric & A/F Tool Kit

TOOL KITS / SOCKET SETS

ITEM # 89.531

21 Pc 1/4” Metric & A/F Socket Set

Metric Sockets: 5, 6, 7, 8, 10, 11, 12, 13mm A/F Sockets: 3/16, 7/32, 1/4, 9/32, 5/16, 3/8, 7/16, 1/2” Socket Accessories: Ratchet 50 & 150mm Extensions, Socket Driver, Uni Joint ITEM # 89.507

DESCRIPTION 21 Pc 1/4” Metric & A/F Socket Set

44 Pc 1/4” Metric & A/F Socket Set

Metric Sockets: 4, 5, 6, 7, 8, 9, 10, 11, 12, 13mm AF Sockets: 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2” Metric Deep Sockets: 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm AF Deep Sockets: 3/16, 7/32, 1/4, 9/32, 5/16, 3/8, 7/16, 1/2” Socket Accessories: Ratchet, Spinner Handle, Flex Handle, Extension 50, 150mm, Universal Joint ITEM # 89.536

DESCRIPTION 44 Pc 1/4” Metric & A/F Socket Set Please note: All metal socket set cases have been colour altered as they are being changed from red to yellow.

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

101


MECHANICS TOOLS 37 Pc 1/4 & 3/8” Metric & A/F Socket Set

1/4” Drive Metric Sockets: 4, 5, 6, 7, 8, 10, 11, 12mm 1/4” Drive A/F Sockets: 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2” 1/4” Drive Socket Accessories: Socket Driver 3/8” Drive Metric Sockets: 8, 10, 11, 12, 13, 14, 16, 17, 19mm 3/8” Drive A/F Sockets: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4” 3/8” Drive Socket Accessories: Ratchet, Adaptor ITEM # 89.518

DESCRIPTION 37 Pc 1/4 & 3/8” Metric & A/F Socket Set

40 Pc 1/4 & 3/8” Metric & A/F Socket Set

SOCKET SETS

1/4” Drive Sockets & Accessories Drive Metric Sockets: 4, 5, 6, 7, 8, 9, 10, 11, 12mm Drive A/F Sockets: 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2” Drive Socket Accessory: Socket Driver 3/8” Drive Sockets & Accessories Drive Metric Sockets: 8, 10, 11, 12, 13, 14, 16, 17, 19mm Drive A/F Sockets: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4” Drive Spark Plug Sockets: 5/8,13/16” Drive Socket Accessories: Ratchet, 75mm Extension, Adaptor ITEM # 89.506

DESCRIPTION 40 Pc 1/4 & 3/8” Metric & A/F Socket Set

46 Pc 1/4 & 3/8” Metric & A/F Socket Set

1/4” Drive Socket Accessories Socket Driver, Bit Holder, 6x Hex Bits/Torx Bits, 6x Screwdriver Bits 3/8” Drive Sockets & Accessories Drive Metric Sockets: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm Drive A/F Sockets: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4” Drive Spark Plug Sockets: 5/8, 13/16” Drive Socket Accessories: Ratchet, 75 & 150mm Extensions, Uni Joint & Adaptor ITEM # 89.516

DESCRIPTION 46 Pc 1/4 & 3/8” Metric & A/F Socket Set

38 Pc 1/4 & 1/2” Metric & A/F Socket Set

1/2” Drive Sockets & Accessories Metric Sockets: 10, 12, 13, 14, 15, 16, 17, 18, 19, 24mm A/F Sockets: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 7/8, 15/16” Socket Accessories: Ratchet, 125mm Extension, Flex Bar & Uni Joint Ring & Open End Spanners Metric Spanners: 8, 10, 12, 13, 14, 16, 17, 19mm A/F Spanners: 3/8, 7/16, 1/2, 9/16, 5/8, 3/4, 7/8”

ITEM # 89.505

DESCRIPTION 38 Pc 1/4 & 1/2” Metric & A/F Socket Set Please note: All metal socket set cases have been colour altered as they are being changed from red to yellow.

102

Visit us at: www.stanleytools.com


MECHANICS TOOLS 43 Pc 1/4 & 1/2” Metric & A/F Socket Set

1/4” Drive Socket Accessories Socket Driver, Bit Holder, 6 x Hex Bits, 6 x Torx Bits, 6 x Screwdriver Bits 1/2” Drive Sockets & Accessories Drive Metric Sockets: 10, 12, 13, 14, 17, 18, 19, 21, 24mm Drive A/F Sockets: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16” Drive Socket Accessories: Ratchet, 75 & 250mm Extensions & Uni Joint ITEM # 89.517

DESCRIPTION 43 Pc 1/4 & 3/8” Metric & A/F Socket Set

50 Pc 1/4 & 1/2” Metric & A/F Socket Set

1/4” Drive Sockets & Accessories Metric Sockets: 4, 5, 6, 7, 8, 9, 10mm AF Sockets: 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8” Ratchet, Extension 50, 150mm, Universal Joint 1/2” Drive Sockets & Accessories Metric Sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 23, 24, 27mm AF Sockets: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1” Ratchet, Extension 62.5, 125mm, Universal Joint AF Spark Plug Sockets: 5/8, 13/16”

DESCRIPTION 50 Pc 1/4 & 1/2” Metric & A/F Socket Set

SOCKET SETS

ITEM # 89.535

42 Pc 3/8” Metric & A/F Socket Set

Metric Sockets: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm Metric Deep Sockets: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm A/F Sockets: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4” A/F Deep Sockets: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4” Socket Accessories: Ratchet, 75 & 150mm Extensions & Uni Joint ITEM # 89.508

DESCRIPTION 42 Pc 3/8” Metric & A/F Socket Set

21 Pc 3/8 & 1/2” ThruDrive™ Socket Set

21 Pc ThruDrive™ includes 3/8 & 1/2” square drives in one standard ratchet. Increases the speed of removing or tightening fasteners. Reaches fasteners that even deep sockets can’t access. Ideal for running down fasteners on threaded rod. Ergonomically designed handle has a bi-material comfort grip. Retains the strength of a standard ratchet with only a 5˚ handle arc-swing. Includes: ThruDrive Sockets: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4” ThruDrive Sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm 75mm ThruDrive Extension 3/8’ + 1/2” square drive socket adaptors ITEM # 89.811

DESCRIPTION 21 Pc 3/8 & 1/2” ThruDrive™ Socket Set Please note: All metal socket set cases have been colour altered as they are being changed from red to yellow.

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

103


MECHANICS TOOLS 25 Pc 1/4 & 3/8” CrankDrive Socket Set

21 Pc ThruDrive™ includes 3/8 & 1/2” square drives in one standard ratchet. Increases the speed of removing or tightening fasteners. Reaches fasteners that even deep sockets can’t access. Ideal for running down fasteners on threaded rod. Ergonomically designed handle has a bi-material comfort grip. Retains the strength of a standard ratchet with only a 5˚ handle arc-swing. Includes: Dual Drive Thru Hole Socket: MM(SAE) – 10(3/8), 11(7/16), 12(15/32), 13(1/2), 14(9/16), 15(19/32), 16(5/8), 17(11/16), 18(23/32), 19(3/4) Thru Hole Extension Bar : 3” 3/8” Drive Thru Hole Adaptor 1/4” Drive Thru Hole Adaptor 1/4” Drive Thru Bit Adaptor Crank Ratchet 10 Bits

SOCKET SETS

ITEM # 89.813

DESCRIPTION 25 Pc 1/4 & 3/8” CrankDrive Socket Set

43 Pc 1/2” Metric & A/F Socket Set

Metric Sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 26, 27, 28, 30, 32mm A/F Sockets: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-1/16, 1-1/8, 1-3/16, 1-1/4” Spark Plug Sockets: 5/8, 13/16” Socket Accessories: Ratchet, 75, 125 & 250mm Extensions, Flex Bar & Uni Joint

ITEM # 89.509

DESCRIPTION 43 Pc 1/2” Metric & A/F Socket Set

26 Pc 3/4” Metric & AF Drive Socket Set

Metric Sockets: 22, 24, 27, 30, 32, 36, 41, 46, 50mm A/F Sockets: 7/8, 15/16, 1, 1-1/8, 1-1/4, 1-5/16, 1-3/8, 1-7/16, 1-5/8, 1-3/4, 1-7/8, 2” Socket Accessories: Ratchet, Sliding T-Handle, Extensions 100mm, 200mm ITEM # 89.537

DESCRIPTION 26 Pc 1/4 & 3/8” Metric & A/F Socket Set

Please note: All metal socket set cases have been colour altered as they are being changed from red to yellow.

104

Visit us at: www.stanleytools.com


MECHANICS TOOLS 11 Pc Metric Spanner Set

Metric Spanners: 8, 10, 11, 12, 13, 14, 16, 17, 19, 22mm Adjustable Wrench: 100mm ITEM # 89.540

DESCRIPTION 11 Pc Metric Spanner Set

11 Pc A/F Spanner Set

A/F Spanners: 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8” Adjustable Wrench: 100mm DESCRIPTION 11 Pc Metric Spanner Set

SPANNER SETS

ITEM # 89.541

16 Pc Metric & A/F Ring & Open End Spanner Set Metric: 8,10,11,12,13,14,15,17mm Imperial: ¼,5/16,3/8,7/16,1/2,9/16,5/8,3/4” Packaged in spanner roll & colour box ITEM # 89.542

DESCRIPTION 16 Pc Metric & A/F Ring & Open End Spanner Set

24 Pc Metric & A/F Ring & Open End Spanner Set

Metric: 8,10,11,12,13,14,15,16, 17, 18, 19, 22mm Imperial: ¼, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16” Packaged in spanner roll & colour box

ITEM # 89.520

DESCRIPTION 24 Pc Metric & A/F Ring & Open End Spanner Set Please note: All metal socket set cases have been colour altered as they are being changed from red to yellow.

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

105


MECHANICS TOOLS 7 Pc 1/2” Drive A/F Deep Socket Set Deep Sockets: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4” ITEM # 89.512

DESCRIPTION 7 Pc 1/2” Drive A/F Deep Socket Set

10 Pc 1/2” Drive Metric Deep Socket Set Deep Sockets: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4” ITEM # 89.511

DESCRIPTION Deep Sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm

SOCKET ACCESSORIES

Ratchets & Extensions ITEM # 89.817 91.059 86.007 89.818 86.206 86.207 89.819 88.930 86.407 86.408 86.004 86.415 86.011 86.211

DESCRIPTION Ratchet 1/4” Drive Reverse, Male Extension 1/4” Drive Male/Female 50mm Extension 1/4” Drive Male/Female 150mm Ratchet 3/8” Drive Reverse, Male Extension 3/8” Drive Male/Female 75mm Extension 3/8” Drive Male/Female 150mm Ratchet 1/2” Drive Reverse Male Extension 1/2” Drive Male/Female 75mm Extension 1/2” Drive Male/Female 125mm Extension 1/2” Drive Male/Female 250mm Spinner Handle 1/4” Drive Flex Bar 1/2” Drive 375mm Uni Joint 1/4” Drive Uni Joint 3/8” Drive

86.411 86.214 86.414

Uni Joint 1/2” Drive Adaptor 3/8” Female to 1/4” Male Adaptor 1/2” Female to 3/8” Male

1/4” Drive Metric & A/F Sockets ITEM #

DESCRIPTION

A/F SOCKETS 86.022 86.024 86.025 86.026 86.027 86.028 86.029 86.030

Socket 1/4” Dr 3/16” AF Socket 1/4” Dr 1/4” AF Socket 1/4” Dr 9/32” AF Socket 1/4” Dr 5/16” AF Socket 1/4” Dr 11/32” AF Socket 1/4” Dr 3/8” AF Socket 1/4” Dr 7/16” AF Socket 1/4” Dr 1/2” AF

METRIC SOCKETS 86.102 86.103 86.104 86.105 86.106 86.107 86.108 86.109 86.112

106

Socket 1/4” Dr 5mm Socket 1/4” Dr 6mm Socket 1/4” Dr 7mm Socket 1/4” Dr 8mm Socket 1/4” Dr 9mm Socket 1/4” Dr 10mm Socket 1/4” Dr 11mm Socket 1/4” Dr 12mm Socket 1/4” Dr 13mm

Visit us at: www.stanleytools.com


MECHANICS TOOLS 3/8” Drive Metric & A/F Sockets ITEM #

DESCRIPTION

A/F SOCKETS 86.260 86.261 91.132 91.138 91.151 91.186 91.283 88.176 88.177

Socket 3/8” Dr 1/4” AF Socket 3/8” Dr 5/16” AF Socket 3/8” Dr 3/8” AF Socket 3/8” Dr 7/16” AF Socket 3/8” Dr 1/2” AF Socket 3/8” Dr 9/16” AF Socket 3/8” Dr 5/8” AF Socket 3/8” Dr 11/16” AF Socket 3/8” Dr 3/4” AF

91.286 91.287 91.288 91.289 91.296

Socket 3/8” Dr 3/8” AF Deep Socket 3/8” Dr 7/16” AF Deep Socket 3/8” Dr 1/2” AF Deep Socket 3/8” Dr 9/16” AF Deep Socket 3/8” Dr 5/8” AF Deep

91.297 91.298

Socket 3/8” Dr 11/16” AF Deep Socket 3/8” Dr 3/4” AF Deep

SOCKET ACCESSORIES

A/F DEEP SOCKETS

METRIC SOCKETS 86.343 86.344 86.345 86.346 86.347 86.348 86.349 86.350 86.351 86.352 88.146 88.147

Socket 3/8” Dr 8mm Socket 3/8” Dr 9mm Socket 3/8” Dr 10mm Socket 3/8” Dr 11mm Socket 3/8” Dr 12mm Socket 3/8” Dr 13mm Socket 3/8” Dr 14mm Socket 3/8” Dr 15mm Socket 3/8” Dr 16mm Socket 3/8” Dr 17mm Socket 3/8” Dr 18mm Socket 3/8” Dr 19mm

METRIC DEEP SOCKETS 86.338 86.339 86.362 86.363 86.364 86.365 86.366 86.367 86.368 86.369 86.370 86.371

Socket 3/8” Dr 8mm Deep Socket 3/8” Dr 9mm Deep Socket 3/8” Dr 10mm Deep Socket 3/8” Dr 11mm Deep Socket 3/8” Dr 12mm Deep Socket 3/8” Dr 13mm Deep Socket 3/8” Dr 14mm Deep Socket 3/8” Dr 15mm Deep Socket 3/8” Dr 16mm Deep Socket 3/8” Dr 17mm Deep Socket 3/8” Dr 18mm Deep Socket 3/8” Dr 19mm Deep

A/F SPARK PLUG SOCKETS 86.380 86.381

Socket Sp/Plug 3/8” Dr 5/8” AF

Socket Sp/Plug 3/8” Dr 13/16” AF

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

107


MECHANICS TOOLS 1/2” Drive Metric & A/F Sockets ITEM #

DESCRIPTION

A/F SOCKETS 86.461 86.462 86.463 86.464 88.815 88.816 88.817 88.818 88.819 88.820 88.821 88.822 88.823 86.496 88.824

Socket 1/2” Dr 3/8” AF Socket 1/2” Dr 7/16” AF Socket 1/2” Dr 1/2” AF Socket 1/2” Dr 9/16” AF Socket 1/2” Dr 5/8” AF Socket 1/2” Dr 11/16” AF Socket 1/2” Dr 3/4” AF Socket 1/2” Dr 13/16” AF Socket 1/2” Dr 7/8” AF Socket 1/2” Dr 15/16” AF Socket 1/2” Dr 1” AF Socket 1/2” Dr 1-1/16” AF Socket 1/2” Dr 1-1/8” AF Socket 1/2” Dr 1-3/16” AF Socket 1/2” Dr 1-1/4” AF

SOCKET ACCESSORIES

A/F DEEP SOCKETS

108

88.889 86.480 86.481 86.482

Socket 1/2” Dr 3/8” AF Deep Socket 1/2” Dr 7/16” AF Deep Socket 1/2” Dr 1/2” AF Deep Socket 1/2” Dr 9/16” AF Deep

86.483 86.484 86.485

Socket 1/2” Dr 5/8” AF Deep Socket 1/2” Dr 11/16” AF Deep Socket 1/2” Dr 3/4” AF Deep

METRIC SOCKETS 86.54O 86.541 86.542 86.543 86.544 86.545 86.546 86.547 88.788 88.789 88.790 88.791 88.792 88.793 88.794 88.795

Socket 1/2” Dr 8mm Socket 1/2” Dr 9mm Socket 1/2” Dr 10mm Socket 1/2” Dr 11mm Socket 1/2” Dr 12mm Socket 1/2” Dr 13mm Socket 1/2” Dr 14mm Socket 1/2” Dr 15mm Socket 1/2” Dr 16mm Socket 1/2” Dr 17mm Socket 1/2” Dr 18mm Socket 1/2” Dr 19mm Socket 1/2” Dr 20mm Socket 1/2” Dr 21mm Socket 1/2” Dr 22mm Socket 1/2” Dr 23mm

88.796 88.798 88.799 88.800 88.802 88.803

Socket 1/2” Dr 24mm Socket 1/2” Dr 26mm Socket 1/2” Dr 27mm Socket 1/2” Dr 28mm Socket 1/2” Dr 30mm Socket 1/2” Dr 32mm

Visit us at: www.stanleytools.com


MECHANICS TOOLS 1/2” Drive Metric & A/F Sockets - Continued ITEM #

DESCRIPTION

METRIC DEEP SOCKETS 86.418 86.419 86.420 86.421 86.422 86.423 86.424 86.425 86.426 86.427 86.485

Socket 1/2” Dr 10mm Deep Socket 1/2” Dr 11mm Deep Socket 1/2” Dr 12mm Deep Socket 1/2” Dr 13mm Deep Socket 1/2” Dr 14mm Deep Socket 1/2” Dr 15mm Deep Socket 1/2” Dr 16mm Deep Socket 1/2” Dr 17mm Deep Socket 1/2” Dr 18mm Deep Socket 1/2” Dr 19mm Deep Socket 1/2” Dr 3/4” AF Deep

A/F SPARK PLUG SOCKETS Socket Sp/Plug 1/2” Dr 5/8” AF Socket Sp/Plug 1/2” Dr 13/16” AF

SOCKET ACCESSORIES

86.580 86.581

Ring & Open End Spanners ITEM #

DESCRIPTION

METRIC SPANNERS 87.057 87.058 87.069 87.070 87.071 87.072 87.073 87.074 87.075 87.076 87.077 87.078 87.079 87.080 87.081 87.082 87.083 87.084

R.O.E. Spanner 7mm R.O.E. Spanner 8mm R.O.E. Spanner 9mm R.O.E. Spanner 10mm R.O.E. Spanner 11mm R.O.E. Spanner 12mm R.O.E. Spanner 13mm R.O.E. Spanner 14mm R.O.E. Spanner 15mm R.O.E. Spanner 16mm R.O.E. Spanner 17mm R.O.E. Spanner 18mm R.O.E. Spanner 19mm R.O.E. Spanner 20mm R.O.E. Spanner 21mm R.O.E. Spanner 22mm R.O.E. Spanner 23mm R.O.E. Spanner 24mm

A/F SPANNERS 87.660 87.661 87.662 87.663 87.664 87.665 87.666 87.667 87.668 87.669 87.670 87.671 87.672

R.O.E. Spanner 1/4” AF R.O.E. Spanner 5/16” AF R.O.E. Spanner 3/8” AF R.O.E. Spanner 7/16” AF R.O.E. Spanner 1/2” AF R.O.E. Spanner 9/16” AF R.O.E. Spanner 5/8” AF R.O.E. Spanner 11/16” AF R.O.E. Spanner 3/4” AF R.O.E. Spanner 13/16” AF R.O.E. Spanner 7/8” AF R.O.E. Spanner 15/16” AF R.O.E. Spanner 1”AF

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

109


Auto Tools Stanley® Innovation Advantage – Ease of use for the DIY person

The Stanley® range of Automotive tools have a broad range of tools that allow the serious DIY person to carry out service and repairs on their own vehicle.

110

Visit us at: www.stanleytools.com


AUTO TOOLS Circuit Tester

Suitable for testing 6-24 volt electrical systems. Brass body casing and sharp piercing tip with protective cap. ITEM # 992426

BOX QTY 1

Terminal Crimping & Wire Stripping Pliers

For crimping non-insulated terminals. Other functions include small bolt cutting to 4mm, wire cutting and wire- stripping capabilities. ITEM # 990401

BOX QTY 1

Crimping Tool Set

ITEM # 990403B

TUNE-UP / ELECTRICAL

Crimping pliers with an added 80 Pc insulated terminal assortment supplied in a plastic storage case. BOX QTY 1

Master Feeler Gauge

Includes 25 blades dual etched with inch & metric sizes. – Sizes from 0.0015” (0.038mm) to 0.035” (0.889mm). 0.0015, 0.002, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.018, 0.020, 0.022, 0.024, 0.025, 0.028, 0.030, 0.032, 0.035” ITEM # 997001

BOX QTY 1

Offset Feeler Gauge

Includes 9 blades dual etched with inch & metric sizes. – Sizes from 0.009” (0.229mm) to 0.026” (0.660mm) 0.009, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020, 0.021, 0.026” ITEM # 997008

BOX QTY 1

Metric Feeler Gauge

Includes 25 metric blades from 0.04mm to 1.0mm 0.04, 0.05, 0.06, 0.07, 0.08, 0.09, 0.10, 0.15, 0.20, 0.25, 0.30, 0.35, 0.40, 0.45, 0.50, 0.55, 0.60, 0.65, 0.70, 0.75, 0.80, 0.85, 0.90, 0.95, 1.0mm ITEM # 997013

BOX QTY 1

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

111


AUTO TOOLS Flexible Spark Plug Wrenches

9” (230mm) PVC coated T-Handle with springed universal joint. Provides a secure and comfortable grip, with steady flexibility to reach recessed spark plugs while avoiding burns from hot engine parts. ITEM # 992186 992187

DESCRIPTION 13/16” (21mm) 5/8” (16mm)

BOX QTY 1

Cleaning Brush Set

3 Pc set. Set consists of Nylon, Brass and Stainless Steel bristles with compact plastic handle. Ideal for many cleaning applications including removal of dirt, rust, peeling paint & engine parts.

TUNE-UP / ELECTRICAL

ITEM # 992130

BOX QTY 1

Offset Distributor Clamp Wrench

Offset design allows reach around obstructions when tightening or loosening distributor lock nuts. 1/2” and 9/16” hex sizes can be used as a double ended tool or pulled apart for single ended use allowing compatibility with 3/8” square drive tools. ITEM # 995562

BOX QTY 1

Battery Carrier Strap

Battery carrier strap for easy cartage of top terminal batteries. ITEM # 990101

BOX QTY 1

Battery Hydrometer

Tests specific gravity of battery fluid. Suit 6, 12, 24V batteries. Determine battery condition by cell comparison. ITEM # 990103

BOX QTY 1

Battery Post & Terminal Cleaner

Internal & external wire brushes clean corrosion and dirt build-up from battery terminal posts and cable clamps. Use bottom brush for cleaning terminals. Unscrew top and use inside brush for cleaning cables. ITEM # 992296

112

BOX QTY 1

Visit us at: www.stanleytools.com


AUTO TOOLS Deluxe Compression Tester Kit

Large 2-1/2” gauge head with four colour-coded scales: 0-300psi, 21kg/cm, 21 bra and 2100 kpa with convenient side-release valve. 13” (330mm) rubber hose with 14/18mm adaptor fittings and a 6” straight adaptor with universal rubber cone provides a deluxe kit for most compression testing requirements. ITEM # 991090

BOX QTY 1

Cylinder Compression Tester

Large 2-1/2” gauge head with four colour-coded scales 0-300psi, 21kg/cm, 21 bar and 2100 kpa with convenient side-release valve. 13” (330mm) rubber hose with 14/18mm adaptor fittings. BOX QTY 1

Heavy Duty Oil Filter Wrench

Durable body with spring controlled jaw removes filters fast. Suits filter sizes from 2-1/2” to 3-7/8” (63-98mm). ITEM # 997693

BOX QTY 1

Swivel Grip Oil Filter Wrenches

Swivel handle design for hard to reach areas and strong handle mechanism permit a firm positive grip when removing oil filters. ITEM # 997641 997670 997671

DESCRIPTION To suit 2-3/8” to 2-7/8” (60-73mm) filter diameters To suit 2-7/8” to 3-1/4” (73-83mm) filter diameters To suit 3-1/2” to 3-7/8” (89-98mm) filter diameters

BOX QTY 1 1 1

3 Leg Reversible Oil Filter Wrench

ENGINE SERVICE / ACCESSORIES

ITEM # 991092

Three legged design suiting oil filter sizes from 2-1/2” to 4” (60-100mm) in diameter. For use with either 3/8” or 1/2” square drive tools or 13/16” (21mm) spanner. ITEM # 997654

BOX QTY 1

Economy Strap Oil Filter Wrench

Socket type drive body with durable nylon strap. Removes oil filters up to 4-3/4” (120mm) in diameter. For use with 1/2” square drive tool or 13/16” (21mm) spanner. ITEM # 997687

BOX QTY 1

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

113


AUTO TOOLS Drain Plug Wrench Set

2 Pc set. 8 different sizes per tool for the removal of sump, gearbox and differential drain plugs. Sizes: AF - 1/8”-1/4”, 1/4”-7/16”, 3/4”, 9/16”, 1/2”, 7/16”, 3/8”, 9/16”, METRIC - 10, 11, 12, 13, 14, 15, 16, 17mm. ITEM # 997663

BOX QTY 1

Engine Cylinder Hone

ENGINE SERVICE / ACCESSORIES

Suits cylinders 2” to 7” (50-135mm). Unit fitted with 4” (100mm) Medium Grit Stones. Flexible shaft and adjustable pressure allow good stability during operation. ITEM # 996800

BOX QTY 1

Piston Ring Compressor

Self locking ratchet pawl prevents premature release. Friction proof edge allows smooth and accurate piston fitting operation. Suits piston sizes of 2-1/8” to 5” (53-125mm). ITEM # 994021

BOX QTY 1

Valve Spring Compressor

Universal compressor with strong adjustable cam-action, parallel lift and automatic locking suitable for small/medium OHV engines. 75-165mm capacity with a 150mm throat clearance. ITEM # 994025

BOX QTY 1

Valve Lappers

Contoured hardwood handles for easy hand valve lapping. 2 Pc set consisting of a small and large sizes. Grease, oil and petrol resistant neoprene cups. ITEM # 994018

BOX QTY 1

Hydraulic Valve Lifter Puller

Slim design allows fit through push-rod holes. Expanding jaws enable lifter removal. ITEM # 994702

114

BOX QTY 1

Visit us at: www.stanleytools.com


AUTO TOOLS Mechanic’s Stethoscope

Aluminium sound chamber amplifies even the slightest sounds through a rubber-mounted probe locating internal engine noise. Disassembles for storage. ITEM # 991561

BOX QTY 1

Air-freeze Tester

Tests concentration of glycol in cooling systems. Prevent costly cooling system corrosion. BOX QTY 1

13 Pc Harmonic Balancer Puller Set

Drop forged four slot yoke and forcing screw for removal of balancers, vibration dampers, pulleys, gears and flywheels. ITEM # 995002

BOX QTY 1

Harmonic Balancer Puller Set

46 Pc set. Multi-purpose set for removal of balancers, vibration dampers, pulleys, gears and flywheels. Drop forged four slot yoke with a variety of hex bolts and forcing screw tips provides a complete universal set. ITEM # 995001

BOX QTY 1

ENGINE SERVICE / ACCESSORIES

ITEM # 990105

Gasket Scraper

Removes gaskets and carbon build-up from block and cylinder head surfaces. Blade width of 1” (25mm). ITEM # 992242

BOX QTY 1

Plastic Handle Parts Cleaning Brush

Durable Nylon bristles. Suitable for use with most cleaning solvents. ITEM # 992132

BOX QTY 1

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

115


AUTO TOOLS Brake Adjusting Tool Set

2 Pc set. Adjust drum brakes on passenger & light commercial vehicles. Sizes: 7-1/2” (190mm) and 9” (228mm) ITEM # 996536

BOX QTY 1

Brake Cylinder Hone

Suits brake cylinders 3/4” to 2” (19-50mm). Unit fitted with 3 x 1-1/8” (28mm) Medium Grit Stones. Flexible shaft and adjustable pressure allow good stability during operation.

BRAKE SERVICE TOOLS

ITEM # 996805

BOX QTY 1

Brake Cylinder Hone

Suits brake cylinders 1/2” to 2-1/2” (13-64mm). Unit fitted with 1-1/8” (28mm) Medium Grit Stones. Flexible shaft and adjustable pressure allow good stability during operation. ITEM # 996806

BOX QTY 1

Hose Pinchers

Pinch off vacuum, fuel and brake lines easily without damage. Simple operation for all line clamping requirements. ITEM # 991035

BOX QTY 1

Rear Disc Brake Piston Cube

Cube design provides six different piston cavity configurations suiting common piston sizes. For use with 3/8” square drive tool for winding the brake piston into the caliper allowing clearance for new brake pads. ITEM # 996589

BOX QTY 1

Disc Brake Pad Spreader

Makes brake pad changing easy. Pushes brake piston back to allow clearance to install new brake pads. ITEM # 994702

116

BOX QTY 1

Visit us at: www.stanleytools.com


AUTO TOOLS 3 in 1 Precision Tubing Bender

180˚ angle scale. Accurately bends 1/4”, 5/16” or 3/8” O.D. tubing. Quality aluminum body. BOX QTY 1

Tube Cutter

Wide dual roller design with hardened SK2 cutting wheel. Cuts copper, brass, aluminium and mild steel tubing from 1/8” to 1-1/8” (3-30mm) O.D. ITEM # 994775

BOX QTY 1

Pitman Arm Puller

Used to remove pittman arm from steering box. Heat-treated, drop forged yoke with heavy duty forcing screw. 1-5/16” (33mm) opening with a 2-1/2” (60mm) depth. ITEM # 995008

BOX QTY 1

Steering Wheel Puller

Sliding bolt assembly allows universal fit for most steering wheels. Can also be used for removing pulleys, small flywheels, flanges and gears. 3” hex bolts supplied in sizes: 3/8” UNC, 5/16” UNC and 5/16” UNF. ITEM # 995000

BOX QTY 1

Ball Joint Separator

Heat-treated, drop forged steel body and bolt for long life usage. Separates ball joints where space is restricted. Jaw opening: 19mm minimum, 38mm maximum. ITEM # 995010

BOX QTY 1

BRAKE SERVICE TOOLS / STEERING / DRIVE-TRAIN

ITEM # 994774

Mini Ball Joint Separator

Ideal for cars with limited access. Drop forged heat treated steel built to withstand heavy use. Jaw width - 19mm. Overall length - 200mm ITEM # 990447

BOX QTY 1

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

117


AUTO TOOLS Coil Spring Compressor Set

Tempered carbon steel lead screws and ductile casted jaws with “wrap over” design, provide a safe and positive grip on coil springs in limited working areas. 9” (230mm) maximum jaw opening capacity for use with 1/2” square drive. ITEM # 995020

BOX QTY 1

STEERING / SUSPENSION / DRIVE-TRAIN

Pry Bar Set

Kit comprises of four bars with overall lengths of: 8” (200mm), 12” (300mm), 18” (450mm) and 24” (600mm). Heat-treated, drop forged steel blades with high impact resistant handles providing comfortable grip and powerful leverage. ITEM # 992237

BOX QTY 1

Dial Type Tyre Gauge

10-60 psi (68.9-413.7 kpa) scale. All metal construction. Holds pressure readings during use. Pressure release button for gauge reset. ITEM # 990501

BOX QTY 1

Low Pressure Tyre Gauge

Measures 5 to 50 psi (68.9 - 827.3 kpa). Pencil type gauge with pocket clip. ITEM # 990502

BOX QTY 1

4 in 1 Valve Stem Repair Tool

High grade tempered steel. Installs and removes valve cores. Re-threads inner & outer valve stem threads. Installs new valve stems in tubeless tyres. ITEM # 994711

BOX QTY 1

Air Blow Gun

For all “blow” cleaning applications. High impact plastic body with built in hanging slot. 1/4” NPT Inlet connection. ITEM # 991511

118

BOX QTY 1

Visit us at: www.stanleytools.com


AUTO TOOLS Spot Weld Cutter

Quality alloy steel cutting blades cut 3/8” holes in most materials. 1/4” arbor with retracting pilot assures accurate cuts. 1/4” hex shaft for use with any variable speed drill. ITEM # 997866

BOX QTY 1

Replacement Spot Weld Cutter Blades 3 Pc replacement blade pack to suit 997866.

BOX QTY 1

SPECIALTY SERVICE TOOLS

ITEM # 997875

Door Handle Remover

For removal of door handle clips, door panel clips and headlight springs. ITEM # 997852

BOX QTY 1

15 Slot Spanner Rack

Durable plastic rack holds 15 spanners. ITEM # 991413

BOX QTY 1

Telescopic Inspection Mirror

1” x 2” (25mm x 50mm) swivelling mirror head. Telescopic extension extends to 19-11/16” (184mm-500mm). Pen type design with pocket clip. ITEM # 998025

BOX QTY 1

Flexible Magnetic Pick-up Tool

500mm in length. Comfortable handle with flexible shaft that bends and holds in all positions. Ideal for working in any hard to reach areas. ITEM # 998001

BOX QTY 1

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

119


AUTO TOOLS Magnetic Parts Tray

6” (150mm diameter). Magnetic based stainless steel tray holds itself and contents in any position avoiding loss of parts. Suitable for holding bolts, nuts, screws, nails, washers etc whilst working. ITEM # 991401B 991404B

DESCRIPTION 6”/150mm diameter 230 x 105mm diameter

BOX QTY 1 1

Screw Extractor Set

6 Pc screw extractor set in drill sizes: 1/8”, 1/4”, 5/16”, 7/16” 9/16” and 3/4”. Removes broken studs easily. Use with correct sized HSS drill.

SPECIALTY SERVICE TOOLS

ITEM # 992223

BOX QTY 1

Stud Puller Socket Set

4 Pc metric set. Sizes: 6mm, 8mm, 10mm & 12mm. Heat-treated, alloy steel sockets to pull and remove bolts with broken bolt heads. ITEM # 992267

BOX QTY 1

Stud Remover

Used to extract studs from 1/4” to 3/4” (6-19mm). For use with 1/2” square drive tools. ITEM # 998400

BOX QTY 1

Nut Splitter Set

2 Pc set. Removes rusted or seized nuts easily without damaging bolt thread. 3-3/4” nut splitter for use on nuts 1/8” to 5/8” (3-8mm). 4-3/4” nut splitter for use on nuts 3/8” to 1” (5-25mm). ITEM # 991511

BOX QTY 1

Thread files Internal/External

• Internal External/Thread files for restoring damaged threads on bolts, studs & nuts • Metric Pitches - 0.80, 1.00, 1.25, 1.50, 1.75, 2.00, 2.50, 3.00mm • Sae Pitches - 10, 11, 12, 14, 16, 18, 20, 24TPI ITEM # 998404 998405

120

DESCRIPTION Internal Thread Files External Thread Files

Visit us at: www.stanleytools.com

BOX QTY 1 1


Tool Storage Stanley® Innovation Advantage – It wasn’t broken... but we fixed it anyway! Every year, we collect consumer feedback, conduct quality testing and use that information to improve our broad line of products. This year, our professional product lines, Stanley® FatMax® and the new Stanley® FatMax® Xtreme™ boast fantastic innovations and many features that are firsts in our industry. Solutions that get the job done!

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

121


TOOL STORAGE 16” & 18” FatMax® Xtreme™ Open Mouth Bag

High Quality leather combined with 1200 x 1200 Denier Nylon. Easy access pockets. Rigid construction maintains shape. Multiple tool compartments for various tool types. Huge capacity. Main compartment features twin Heavy Duty easy-open zips with oversized rubber grip tabs. Magnetised external pocket tabs for securing smaller metallic items. Fully adjustable, padded shoulder strap included. Easy-access rubberised, single-pull, twin zippered external pockets. Padded backing for comfortable carrying. Two piece interlocking Heavy Duty handle. Water resistant, polypropyleneinjected base. Unique “2 position” side pockets.

ITEM #

DIMENSIONS

BOX QTY

1.93.954

16” - 19 x 39 x 27cm

4

1.93.956

18” - 51 x 25 x 22cm

4

16” Fatmax Xtreme Open Mouth Bag shown

SOFT STORAGE

FatMax® Xtreme™ Round Top Bag

High Quality leather combined with 1200 x 1200 Denier Nylon. Easy access pockets. Rigid construction maintains shape. Multiple tool compartments for various tool types. Huge capacity. Suitable for power tools. Rigid and durable lid maintains shape. Underside of lid features a mesh pouch for added storage. Main compartment features twin Heavy Duty easy-open zips with oversized rubber grip tabs. Magnetised external pocket tabs for securing smaller metallic items. Easy-access rubberised, single-pull, twin zippered external pockets. Quick access, spring-loaded “tool chute” for fast job-site pack-up. Fully adjustable, padded shoulder strap included. Padded backing for comfortable carrying. Two piece interlocking Heavy Duty handle. Water resistant, polypropylene-injected base. Unique “2 position” side pockets.

ITEM #

DIMENSIONS

BOX QTY

1.93.955

49 x 32 x 32cm

4

FatMax® Xtreme™ Open Tote

High Quality leather combined with 1200 x 1200 Denier Nylon. Easy access pockets. Rigid construction maintains shape. All-metal storage clip for measuring tape storage. Handsaw compartment safely and securely stores the tool. Huge capacity. Suitable for power tools. Padded shoulder strap included. Heavy Duty steel handle with rubber grip. Water resistant, polypropylene-injected base. Handsaw Compartment and spirit level holder. Adjustable “cable pocket” enables storage of electrical cables of varied lengths. Velcro™ spirit level holder tabs.

122

ITEM #

DIMENSIONS

BOX QTY

1.93.957

25 x 36 x 36cm

4

Visit us at: www.stanleytools.com


TOOL STORAGE FatMax® Xtreme™ Technician’s Bag

High Quality leather combined with 1200 x 1200 Denier. Easy access pockets. Rigid construction maintains shape. Multiple tool compartments for various tool types. Huge capacity. Padded backing for comfortable carrying. Steel chain & hook for electrical tape storage. Specialty pocket for storage of screwdriver bits. Fully adjustable, padded shoulder strap included. Padded backing for comfortable carrying. Rubber grip handle. Water resistant, polypropylene-injected base. Removable centre divider for more frequently used tools. All Aluminium construction Carabiner for added storage. ITEM #

DIMENSIONS

BOX QTY

1.93.958

29 x 29 x 36cm

4

Durable, hard wearing 600 x 600 Denier Nylon. Ergonomic, rubber gripped handle. Easy-to-pull rubber zippers. Internal tool loops for easy organisation. Heavy duty shoulder strap included. Rigid, waterproof plastic base. Reinforced handles for extra durability. External multiple tool compartments. ITEM #

DIMENSIONS

BOX QTY

1.93.949

16” - 44 x 26 x 13cm

4

1.93.950

18” - 49 x 26 x 10cm

4 16” FatMax® Hard Base Tool Bag shown

18” FatMax® Open Tote

SOFT STORAGE

16” & 18” FatMax® Hard Base Tool Bag

Durable, hard wearing 600 x 600 Denier Nylon. Heavy Duty steel handle bar with rubber grip. Easy access structure. Large side pocket for cable storage. Durable saw storage compartment. Rigid, waterproof plastic base. External multiple tool compartments. Velcro™ spirit level holder tabs. ITEM #

DIMENSIONS

BOX QTY

1.93.951

48 x 25 x 33cm

4

FatMax® Technician’s Bag

Durable, hard wearing 600 x 600 Denier Nylon. Job-specific storage solwutions. Ergonomic rubber gripped handle. Steel chain & hook for electrical tape storage. Removable divider with belt clip for frequently used tools. Top handle can be removed for placement of larger tools. Specialty pocket for storage of screwdriver bits. Rigid, water-proof plastic base. ITEM#

DIMENSIONS

BOX QTY

1.93.952

29 x 29 x 38cm

4

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

123


TOOL STORAGE Fatmax® 25” (63.5cm) Professional Toolbox

Made of lightweight, durable steel and high impact resin. Metal/Plastic combination brings the benefits of plastic with the sturdiness of metal, while maintaining a heavy duty structure. Features a unique latchless handle lock closure. Ergonomically designed, spacious steel body design for maximum volume utility while the removable tool tray creates more space and allows easy access to smaller accessories. Built in 60cm (24”) level holder designed to prevent accidental vial breakage. Includes a padlock eye for additional security.

ITEM # 1.92.217

DIMENSIONS 714 x 309 x 254mm

BOX QTY 6

NOTE: Tools not included.

PLASTIC STORAGE

4x4 Anti-Slip Toolbox (25”)

Shock absorbing “Sofprene” to protect the toolbox and the contents from accidental impact damage. Anti-Slip coating on feet stops the box from sliding around and prevents scratch marks on delicate surfaces. Twin built in organisers in lid allow fast and easy access to smaller items that would otherwise sink to the bottom of the toolbox. Aluminium latches are rust resistant and have a positive locking action to prevent the box from opening accidentally. Soft grip high access handle, for additional comfort even whilst wearing gloves. Padlock eye for added security. Integrated level holder straps inside toolbox lid accepts most 60cm levels. Weather resistant construction prevents water from penetrating the toolbox and damaging the contents. ITEM # 1.92.998

DIMENSIONS 323.9 x 122.2 x 66.7mm

BOX QTY 6

Pack n’ Latch

Transparent polypropylene drawers for visibility of content. 3 shallow and 2 deep drawers’. Key holes for wall hanging. Removable dividers for maximum storage space adjustment. ITEM # 1.92.772

DIMENSIONS 311 x 150 x 295mm

BOX QTY 6

25” (63.5cm) Fatmax® Toolbox with Organiser Lid

3 Stage “latch-less” handle mechanism – for easy access. Heavy Duty Aluminium handle for comfort and long life. Roll Formed “Seamless” base for maximum strength. Virtually unbreakable polycarbonate lid to see the contents at a glance. Removable organiser cups for greater convenience. Padlock eye for added security. Rust resistant silver metallic coating for long life. An integrated level holder straps inside the toolbox lid accepts most 60cm levels. ITEM # 1.92.983

124

DIMENSIONS 714 x 309 x 254mm

Visit us at: www.stanleytools.com

BOX QTY 6


TOOL STORAGE Structural Box with Flat Top Lid

Rust free – no metal parts. Twin latches on 20” and 26” toolboxes. Removable tray. Bi-material handle. Saw horse groove on 26” toolbox. ITEM # 1.92.766 1.92.767 1.92.768

DIMENSIONS 16” - 396 x 216 x 164mm 20” - 501 x 248 x 235mm 26” - 651 x 283 x 279mm

BOX QTY 6 6 2

Jumbo with Organisers and Metal Latches

2 Pull out organizers & bit holder. Removable tool tray. Double metal latches for added strength. Comfortable grip handle. ITEM # 1.92.905 1.92.906 1.92.908

DIMENSIONS 16” - 394 x 254 x 178mm 19” - 486 x 276 x 232mm 22” - 566 x 321 x 278mm

BOX QTY 6 6 3

NOTE: Tools not included.

Professional Organiser

Virtually unbreakable lid made of high impact crystal clear polycarbonate. 25 compartments. 3 different sized movable compartments. Unique lid design enables to keep all compartments in place. ITEM # 1.92.748

DIMENSIONS 423 x 334 x 52mm

PLASTIC STORAGE / ORGANISERS

NOTE: Tools not included.

BOX QTY 20

Professional Deep Organiser

Virtually unbreakable lid made of high impact crystal clear polycarbonate. 10 compartments. 3 different sized movable compartments. Unique lid design enables to keep all compartments in place. ITEM # 1.92.749

DIMENSIONS 423 x 334 x 105mm

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

BOX QTY 10

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

125


TOOL STORAGE Pro Tool Organiser

Double sided organizer-enables working with two sides simultaneously. 36 compartments. 5 sliding drawers with snap locking- extra storage capacity for tool storage such as screwdrivers; saw blades etc. Built-in wide handle-lock organizers and drawers. 6 drawer dividers. ITEM # 1.92.050

DIMENSIONS 361 x 193 x 289mm

BOX QTY 4

199 Organiser

See-through lid. 26 Compartments. Movable dividers allow customisation. ”Seal tight” compartment latch keeps heavy components in place. ITEM # 1.92.762

DIMENSIONS 457 x 327 x 79mm

BOX QTY 8

PLASTIC STORAGE

NOTE: Tools not included.

Heavy Duty Tool Tray

Portable, multi purpose tool storage. 2 extra deep compartments with 12 Litre volume. Perforations for tools are designed to allow upright positioning of the tools for easy reach. Ergonomic handle - wide and easy to grasp. Design of the handle contributes to the overall strength as the outer rim is an integral part of the tray. Suitable for heavy loads. ITEM # 1.94.220

DIMENSIONS 503 x 344 x 227mm

BOX QTY 12

NOTE: Tools not included.

Mobile Work Centre Rolling Workshop II

Mobile 2 in 1 work centre. Includes a soft front pocket. Lightweight and durable. ITEM # 1.92.070

DIMENSIONS 47 x 298 x 610mm

BOX QTY 2

Pro Mobile Job Chest with Organisers and Metal Latches

Extra large capacity. Main compartment for heavy power tools. Full size upper tray. 4 cups. Metal latches. Heavy duty rubber coated wheels and pull handle. ITEM # 1.92.904

126

DIMENSIONS 613 x 375 x 419mm

Visit us at: www.stanleytools.com

BOX QTY 2


TOOL STORAGE 6 Drawer Tool Chest

Quality ball bearing slides. Heavy gauge steel on critical sections of product. Powder coated with polyester/epoxy hybrid. Chrome plated side handles. Drop front cover supported by 2 lid stays. Anodised drawer handles with provisions for labels. All drawers fitted with drawer liners. ITEM # 92.561

DIMENSIONS 660 x 307 x 378mm

BOX QTY 1

Quality ball bearing slides. Heavy gauge steel on critical sections of product. Powder coated with polyester/epoxy hybrid. Ribbed rear panels for added strength. Re-inforced base for added support. Roller cabinet supplied with top mat. Embossed drawers for added strength and support. Heavy duty 125 x 50mm wheels. Anodised drawer handles with provisions for labels. All drawers fitted with drawer liners. ITEM # 92.564

DIMENSIONS 676 x 459 x 995mm

BOX QTY 1

2 Drawer Add-On Chest

Suitable for 92.561 6 Drawer Chest and 92.564 2 Drawer & Hutch Roll Cabinet. Ball bearing slides with centre locking mechanism with cabinet lock. Drawer sides have rolled edges for extra strength. Protective top mat & drawer liners. Cropped corners for safety. Powder coated finish - yellow with black drawers. ITEM # 92.565

DIMENSIONS 670 x 312 x 262mm

METAL STORAGE / TOOLBOXES

3 Drawer Roll Cabinet with Hutch

BOX QTY 1

Single Compartment Toolbox with Sliding Half Tray The sliding tray is convenient for storing small items and allows for easy access to the large main compartment. A lockable latch is fitted for added security. ITEM # 92.031

DIMENSIONS 442 x 152 x 146mm

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

WEIGHT 2.1kg

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

127


TOOL STORAGE Single Compartment Toolbox with Sliding Half Tray

The sliding half tray is ideal for small parts, drill and screwdriver bits and chuck keys. Full length piano hinge for strength. Full size chest handles each make it easier for lifting. Heavy duty hasp and staple keeps the lid secure and can be padlocked for extra security. The height for the box makes ideal for power tools storage. ITEM # 92.060

DIMENSIONS 567 x 248 x 326mm

WEIGHT 8.4kg

Single Compartment Toolbox with Cantilever Tray

METAL TOOLBOXES

The top tray is ideal for small tools like sockets and screwdrivers and lifts up out of the way for access to the small parts channel. Full length piano hinge for strength and heavy duty hasp and staple. ITEM # 92.063

DIMENSIONS 502 x 248 x 265mm

WEIGHT 6.5kg

Single Compartment Toolbox with Cantilever Tray The single compartment toolbox with cantilever tray is large enough for a wide range of tools but because of its smaller size is easily transportable. Fitted with full length piano hinge and heavy duty hasp and staple.

ITEM # 92.070

DIMENSIONS 462 x 207 x 190mm

WEIGHT 4.1kg

Large Capacity Five Tray Cantilever Toolbox

Twin lids allow easy access to trays and main compartment and keep the toolbox balanced when open. Full size piano hinge and lockable latch are used for added security. The trays are ideal for small articles land tools such as sockets. ITEM # 92.057

128

DIMENSIONS 535 x 255 x 221mm

Visit us at: www.stanleytools.com

WEIGHT 8.4kg


TOOL STORAGE Single Compartment Toolbox

Ideal for the homeowner as it has sufficient capacity for a short range of essential maintenance tools.

ITEM # 92.020

DIMENSIONS 377 x 150 x 127mm

WEIGHT 1.4kg

Single Compartment Toolbox with Cantilever Tray All users will find that the cantilever tray is convenient for holding small items and keeps them separate from larger tools.

DIMENSIONS 464 x 206 x 170mm

WEIGHT 3.0kg

METAL TOOLBOXES

ITEM # 92.022

Five Tray Cantilever Toolbox

Five trays allow for more separation of tools whilst still allowing space for larger items in the main compartment. Trays are ideal for storing sockets.

ITEM # 92.142

DIMENSIONS 464 x 206 x 205mm

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

WEIGHT 5.0kg

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

129


Apprentice Kits Stanley® Innovation Advantage – Industry Specific Kits

Stanley® now carries pre built apprentice kits whose contents have been developed in conjunction with national training and education bodies to ensure relevance.

130

Visit us at: www.stanleytools.com


APPRENTICE 57 Pc Carpentry Kit

FatMax® Toolbox FatMax® Swivel-Lock Retractable Knife Bench Plane (No.4) Block Plane (No.60-1/2) Hacksaw FatMax® Handsaw 500mm JetCut Back Saw FatMax® Jab Saw Hole Saw Set Coping Saw 5 Pc Chisel Set (6, 12, 18, 25, 32mm) 3 Pc Sharpening Set

FatMax® AntiVibe™ Claw Hammer 570g Ball Pein Hammer 450g Club Hammer 1.5kg Tripod Torch 14 Pc Screwdriver Set Metric Hex Keys (10) Imperial Hex Keys (10) Intellisensor® Stud Finder Multigrip Pliers 250mm Locking Pliers 250mm Adjustable Wrench 150mm Adjustable Wrench 250mm Pipe Wrench 250mm

Pipe Wrench 450mm Diagonal Cutting Pliers 190mm Combination Pliers 200mm Tin Snips Straight/Right Cut 250mm Tin Snips Straight/Left Cut 250mm Riveter Punch & Cold Chisel Set Sidchrome® Cold Chisel 25mm Tube Cutter Carpenters Pencil Safety Glasses Ear Muffs

DESCRIPTION 57 Pc Carpentry Kit

77 Pc Plumbers Kit

 etal Toolbox 567x248x326mm M FatMax® Swivel-Lock Retractable Knife FatMax® Hacksaw FatMax® Jab Saw JetCut Handsaw 500mm FatMax® Tape 8 Metre FatMax® Long Tape 30 Metre Steel Rule 300mm Folding Rule 1 Metre Cast Iron Combination Square 300mm FatMax® Level 600mm FatMax® Chalkline Reel Set Brass Plumb Bob 450g

ITEM # 92.0003

Rubber Mallet 3 Pc Cushion Grip Nail Punch Set Wonder Bar 35x300mm 14 Pc Screwdriver Set Adjustable Wrench 300mm Combination Pliers 200mm Multigrip Pliers 250mm Tin Snips Straight/ Right Cut 250mm

APPRENTICE KITS

ITEM # 92.0002

FatMax® Tape 8 Metre FatMax® Long Tape 30 Metre Folding Rule 1 Metre Combination Square 300mm Marking Gauge Hardwood Bevel 203mm FatMax® Chalkline Reel Set Intellisensor® Stud Finder FatMax® Level 600mm CL-2 Self Leveling Crossline Laser Level FatMax® AntiVibe™ Claw Hammer 570g

DESCRIPTION 77 Pc Plumbers Kit

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

131


APPRENTICE 51 Pc Builders Kit

Mobile Contractor Toolbox FatMax® Swivel-Lock Retractable Knife FatMax® Handsaw 500mm Hacksaw 3 Pc Chisel Set (12, 18, 25mm) 3 Pc Sharpening Set FatMax® Tape 8 Metre FatMax® Long Tape 30 Metre FatMax® Level 600mm

APPRENTICE KITS

ITEM # 92.0004

132

DESCRIPTION 51 Pc Builders Kit

15 Pc Pre-Apprentice Kit

Stanley® Tape 8 Metre Dynagrip Chisel 25 mm Longlife Rule 1M FatMax® AntiVibe™ Hammer 20oz Bevel 200mm Combination Square 300mm Nail Punch Set 3 Pc

ITEM # 92.0005

Combination Square 300mm Chalkline Reel Set FatMax® AntiVibe™ Claw Hammer 570g Club Hammer 1.5kg Adjustable Wrench 250mm Combination Pliers 200mm Punch & Cold Chisel Set Sidchrome® Cold Chisel 25mm 14 Pc Screwdriver Set

FatMax® Knife Carpenters Pencil Safety Glasses Safety Earmuffs Storage Bag Tool Belt

DESCRIPTION 15 Pc Pre-Apprentice Kit

Visit us at: www.stanleytools.com

600mm FatMax® Wrecking Bar Folding Rule 1 Metre Tin Snips Straight/Right Cut 250mm Carpenters Pencil Safety Glasses Ear Muffs Nail Belt


APPRENTICE 51 Pc Carpentry Pre-Apprentice Kit FatMax® Toolbox Bench Plane (No.4) Block Plane (No.60-1/2) FatMax® Long Tape 30 Metre Hacksaw JetCut Back Saw Hole Saw Set FatMax® Handsaw 500mm Coping Saw FatMax® Jab Saw 5 Pc Chisel Set (6, 12, 18, 25, 32mm)

Multigrip Pliers 250mm Adjustable Wrench 300mm Combination Pliers 200mm Diagonal Cutting Pliers 190mm Tin Snips Straight/Right Cut 250mm

DESCRIPTION 51 Pc Carpentry Pre-Apprentice Kit

APPRENTICE KITS

ITEM # 92.0006

3 Pc Sharpening Set FatMax® Level 600mm Torpedo Level Hardwood Bevel 203mm Marking Gauge FatMax® Chalkline Reel Set Intellisensor® Stud Finder Brass Plumb Bob 450g Ripping Bar 450mm Rubber Mallet 14 Pc Screwdriver Set

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

133


Hardware Stanley® Innovation Advantage – Stanley® 24/7 Security Locks... Ultimate Security!

Stanley® takes padlocks to a new level with our Professional Grade Security Locks. They’re engineered to be the best in their class, with unique features to tackle the toughest jobs and conditions head on. Featuring hardened molybdenum steel shackles, solid hardened steel casings, stainless steel locking mechanisms and patented rotating key-way covers, the Stanley® Security Locks are built to withstand sawing, cutting and drilling attacks as well as the harsh conditions of outdoor Australia. There are four models of Security Lock: Hardened Steel, All Weather Solid Brass, Laminated and Combination. Stanley® Professional Grade Security Locks… providing security 24/7.

134

Visit us at: www.stanleytools.com


HARDWARE Hardened Steel Security Lock

Stanley’s 24/7 Professional Grade Hardened Steel Security Lock offers high quality, top-level protection. The hardened steel body makes it virtually impenetrable providing maximum security and peace of mind regardless of the job, project or application.

Features and Benefits Hardened molybdenum alloy steel shackle protects against sawing or cutting attacks.

Dual stainless steel ball-bearing locking system resist pry attacks.

Shrouded body provides even greater protection against pry attacks Solid hardened steel body protects lock from attacks

Commercial 6-Pin removable, rekeyable solid brass cylinder, with anti-pick pins that resist picking attacks

Patented rotating keyway cover protects against drilling attacks

DESCRIPTION

SHACKLE CLEARANCE

BOX QTY

S828–145

Hardened Steel Security Lock 50mm

25mm

2

S828–152

Hardened Steel Security Lock 50mm Keyed Alike 2-Pack

25mm

2

S828–160

Hardened Steel Security Lock 60mm

25mm

2

All Weather Solid Brass Security Lock

Stanley’s 24/7 Professional Grade All-Weather Solid Brass Security Lock features a solid brass body that protects it from corrosion under virtually all conditions. Yet it still has all of the maximum security features your application demands.

Features and Benefits

Hardened Stainless steel shackle protects against sawing or cutting attacks

Solid brass body is corrosion resistant under virtually all conditions

Dual stainless steel ball-bearing locking system resist pry attacks

Patented rotating keyway cover protects against drilling attacks

Commercial 6-Pin removable, rekeyable solid brass cylinder, with anti-pick pins that resist picking attacks

Bottom cover seals lock from the elements

ITEM #

SECURITY LOCKS

ITEM #

Tested to ASTM security standards: 60mm – Security Rating – 5 50mm – Security Rating – 4

Tested to ASTM security standards: 50mm – Security Rating – 4

DESCRIPTION

SHACKLE CLEARANCE

BOX QTY

S828–194

All Weather Solid Brass Security Lock 50mm

38mm

2

S828–202

All Weather Solid Brass Security Lock 50mm

64mm

2

S828–210

All Weather Solid Brass Security Lock 50mm Keyed Alike 2-Pack

64mm

2

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

135


HARDWARE Laminated Security Lock

Heavy duty laminated steel, hardened steel end caps and recessed rivets, the Stanley® 24/7 Professional Grade Laminated Security Lock brings maximum protection to the job site. This lock works everywhere, giving you peace of mind when securing your tools and equipment.

Features and Benefits

Hardened molybdenum alloy steel shackle protects against sawing or cutting attacks

Laminated steel body, hardened steel end caps and recessed rivets, protects lock from attacks

SECURITY LOCKS

Patented rotating keyway cover protects against drilling attacks

ITEM #

DESCRIPTION

Dual stainless steel ball-bearing locking system resist pry attacks

Commercial 6-Pin removable, rekeyable solid brass cylinder, with anti-pick pins that resist picking attacks Tested to ASTM security standards: 60mm – Security Rating – 5 50mm – Security Rating – 4

SHACKLE CLEARANCE

BOX QTY

S828–228

Laminated Security Lock 50mm w/ Shroud

25mm

2

S830–810

Laminated Security Lock 50mm

25mm

2

S828–236

Laminated Security Lock 50mm Keyed Alike 2-Pack

25mm

2

S828–244

Laminated Security Lock 60mm

38mm

2

Combination Security Lock

Stanley’s 24/7 Professional Grade Combination Security Lock offers all the features of a high security lock with the convenience of a combination lock. The rugged and superior quality construction makes it a top-of-the-line combination lock for all professionals.

Features and Benefits

Hardened molybdenum alloy steel shackle protects against sawing or cutting attacks

Set your combination, no keys required Corrosion resistant, solid brass internal components

Snap fit bottom cover seals lock from the elements

High impact grey polymer casing for added protection Dual hardened steel locking bolt system resists pry attacks

ITEM #

136

DESCRIPTION

Tested to ASTM security standards: 50mm – Security Rating – 3

SHACKLE CLEARANCE

BOX QTY

S828–178

Combination Security Lock 50mm

38mm

2

S828–186

Combination Security Lock 50mm

64mm

2

Visit us at: www.stanleytools.com


HARDWARE Padlock & Hasp Set Padlock Shrouded shackle padlock 50mm solid brass body Brass tumbler mechanism Added pick resistance Rubber bumper around padlock Hasp & Staple Hardened staple All concealed fixings Hinges design for flexible mounting 200mm long ITEM # S824-284

DESCRIPTION Padlock & Hasp Set Brass

Padlock & Cable Set

BOX QTY 5

PADLOCKS

Padlock 40mm laminated steel body Weather resistant shrouding Three dial combination mechanism User changeable combination PVC coated hardened shackle Cable 1.2m long braided cable 8mm twisted wire construction Long life PVC coating PVC coating wont scratch valuables ITEM # S824-292

DESCRIPTION Padlock & Cable Set Laminated

BOX QTY 5

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

137


HARDWARE MaxLatch Sag Compensating Gate Latch

Compensates for over 12mm of gate sag Passed ANSI/BHMA A156.16 Grade 2 Impact test Padlockable All metal construction Patented Striking double-blister packaging Available in: stainless steel, zinc plated, black powder-coated, galvanised ITEM # S808-808 S808-816 S808-824 S808-832

DESCRIPTION Gate Latch Anti-Sag ZP Gate Latch Anti-Sag BLK Gate Latch Anti-Sag GAL Gate Latch Anti-Sag SS

BOX QTY 5 5 5 2

GATE AND FENCE

Improved Gate Latch

Stainless Steel Traditional ‘improved’ design Passed ANSI/BHMA A156.16 Grade 2 Impact test Padlockable All stainless steel construction Striking double-blister packaging Meets ANSI/BHMA A156.18 Salt Fog Spray test (300 hrs.) ITEM # S808-790

DESCRIPTION Gate Latch SS

BOX QTY 2

2-Way Gate Latch

Heavy Duty Aluminium Body Geared lever operating mechanism operates from inside and outside of gate Extruded aluminium body with stainless steel connectors Meets ANSI/BHMA A156.16 Grade 2 (100,000) cycle test Clear powder coat finish for extended corrosion protection. Meets ANSI/BHMA A156.18 Salt Fog Spray test (300 hrs.) Mounts to 2-Sides of Post Passed ANSI/BHMA A156.16 Grade 1 Impact test Patented design ITEM # S808-881

DESCRIPTION Gate Latch 2-Way Aluminium

BOX QTY 2

2-Way Gate Latch

Heavy Duty Steel Body Geared lever operating mechanism operates from inside and outside of gate Padlocks from inside or outside of gate Heavy duty steel body with colour-coded fasteners Meets ANSI/BHMA A156.16 Grade 2 (100,000) cycle test. Mounts to 2-Sides of Post Passed ANSI/BHMA A156.16 Grade 1 Impact test Patented design Black powder-coated finish

ITEM # S808-857

138

DESCRIPTION Gate Latch 2-Way Blk

Visit us at: www.stanleytools.com

BOX QTY 2


HARDWARE LifeSpan® Gate Hinge

Heavy Duty Aluminium Body Meets ANSI/BHMA A156.16 Grade 2 (100,000) cycle test Extruded aluminium body with solid brass pin construction Carbon polymer LifeSpan® bearings for smooth operation and minimum wear Clear powder coat finish for extended corrosion protection. Meets ANSI/BHMA A156.18 Salt Fog Spray test (300 hrs.) ITEM # S808-758

DESCRIPTION T Hinge HD 89mm Aluminium

BOX QTY 2

LifeSpan® Gate Hinge

ITEM # S808-659 S808-667 S808-675 S808-683

DESCRIPTION Gate Hinge HD 89mm SS Gate Hinge HD 89mm ZP Gate Hinge HD 89mm BLK Gate Hinge HD 89mm GAL

BOX QTY 2 5 5 5

LifeSpan® Spring Gate

Hinge Heavy Duty Steel Body Meets ANSI/BHMA A156.16 (100,000) Cycle test requirements Black Powder coat and Zinc finish for extended corrosion protection. (PC) meets ANSI/BHMA A156.18 Salt Fog Spray test (300 hrs.) LifeSpan® Bearings for smooth operation and minimum wear Automatically closes gate An alternative to unsightly closers and springs Patented ratcheting tension adjustment Available in: zinc plated, black powder-coated ITEM # S808-774 S808-782

DESCRIPTION T Hinge HD Spring ZP Card-2 T Hinge HD Spring BLK Card-2

GATE AND FENCE

Heavy Duty Steel Body Meets ANSI/BHMA A156.16 Bearing Grade 1 (100,000) Cycle test requirements Clear powder coat finish (SS) for extended corrosion protection. Meets ANSI/BHMA A156.18 Salt Fog Spray test (300 hrs.) Carbon polymer LifeSpan® Bearings for smooth operation and minimum wear Ideal for 100mm x 50mm construction Available in: stainless steel, zinc plated, black powder-coated, galvanised

BOX QTY 2 2

LifeSpan® Strap Hinges

Stainless Steel Construction Meets ANSI/BHMA A156.16 Bearing Grade 1 (100,000) Cycle test requirements Clear powder coat finish for extended corrosion protection. Meets ANSI/BHMA A156.18 Salt Fog Spray test (300 hrs.) Carbon polymer LifeSpan® Bearings for smooth operation and minimum wear Striking double-blister packaging Available in: 150mm, 200mm ITEM # S808-592 S808-600

DESCRIPTION Strap Hinge HD 152mm SS Strap Hinge HD 203mm SS

BOX QTY 2 2

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

139


HARDWARE LifeSpan速 T Hinges

Stainless Steel Construction Meets ANSI/BHMA A156.16 Bearing Grade 1 (100,000) Cycle test requirements Clear powder coat finish for extended corrosion protection. Meets ANSI/BHMA A156.18 Salt Fog Spray test (300 hrs.) Carbon polymer LifeSpan速 Bearings for smooth operation and minimum wear. Striking double-blister packaging Available in: 100mm, 150mm, 200mm, 250mm ITEM # S808-618 S808-626 S808-634 S808-642

DESCRIPTION T Hinge HD 101mm SS T Hinge HD 152mm SS T Hinge HD 203mm SS T Hinge HD 254mm SS

BOX QTY 2 2 1 1

Gate Springs

GATE AND FENCE

Fully Adjustable Tension Ideal for use in applications requiring a positive self closing action Can be used on light and heavy duty gates Fully adjustable spring tension Stylish stainless steel construction Passed ANSI/BHMA A156.18 (300 hrs) exposure test ITEM # S808-915 S808-923

DESCRIPTION Gate Spring 279mm SS Gate Spring 355mm SS

BOX QTY 2 2

Pull Handles

Stainless Steel Construction Clear powder coat finish for extended corrosion protection. Meets ANSI/BHMA A156.18 Salt Fog Spray test (300 hrs.) Striking double-blister packaging Available in two styles ITEM # S808-899 S808-907

DESCRIPTION Gate Pull 279mm SS Traditional Gate Pull 279mm SS Ornamental

BOX QTY 2 2

Hasp & Staple

Heavy duty stainless steel Stainless steel fasteners included Stylish stainless steel construction Passed ANSI/BHMA A156.18 (300 hrs) exposure test Striking double-blister packaging ITEM # S808-725

DESCRIPTION Hasp/Staple HD 190mm SS

BOX QTY 2

Barrel Bolt

Heavy duty stainless steel Extra heavy duty design Padlockable Stainless steel fasteners included Stylish stainless steel construction Passed ANSI/BHMA A156.18 (300 hrs) exposure test Striking double-blister packaging ITEM # S808-543

140

DESCRIPTION Barrel Bolt HD 127mm SS

Visit us at: www.stanleytools.com

BOX QTY 2


HARDWARE Drop Bolts

Heavy Duty Steel 14mm Diameter shaft Two-piece bracket Fasteners included Blister on card packaging ITEM # S808-550 S808-568

DESCRIPTION Drop Bolt 457mm BLK Drop Bolt 457mm ZP

BOX QTY 5 5

Low Security Use Ideal for cabinets, boxes & chests Attractive satin brass tone finish Concealed screws when latched Padlockable for added security Accepts shackle diameter up to 7mm ITEM # 750910

DESCRIPTION Hasp/Staple Light 63mm SB

BOX QTY 5

Rotating Post Hasp & Staple

Patented Heavy Duty Design Rotating post allows padlock to always hang straight Rotation helps prevent forced entry by twisting LifeSpan速 Corrugated leaf up to twice as strong as flat leaf hasps Hold-open feature eliminates unwanted swinging Knuckle design and supporting side walls reduce sag Component parts plated prior to assembly ITEM # 754550 754551 801600 754540 754543 754544 754579 754585 754700 754701 754705

DESCRIPTION Hasp/Staple Rotate Post 63mm ZP Hasp/Staple Rotate Post 63mm BLK Hasp/Staple Rotate Post 63mm SB Hasp/Staple Rotate Post 88mm GAL Hasp/Staple Rotate Post 88mm ZP Hasp/Staple Rotate Post 88mm BLK Hasp/Staple Rotate Post 114mm ZP Hasp/Staple Rotate Post 114mm GAL Hasp/Staple Rotate Post 152mm ZP Hasp/Staple Rotate Post 152mm BLK Hasp/Staple Rotate Post 152mm GAL

BOX QTY 5 5 5 5 5 5 5 5 5 5 5

GATE AND FENCE / HASP AND STAPLES

Light Duty Hasp & Staple

Latching Post Hasp & Staple

Patented Heavy Duty Design Serves as a latch or lock Rotation helps prevent forced entry by twisting LifeSpan速 Corrugated leaf up to twice as strong as flat leaf hasps Hold-open feature eliminates unwanted swinging Knuckle design and supporting side walls reduce sag Component parts plated prior to assembly

ITEM # 755200 755201 755210 755211

DESCRIPTION Hasp/Staple Latch Post 88mm ZP Hasp/Staple Latch Post 88mm BLK Hasp/Staple Latch Post 114mm ZP Hasp/Staple Latch Post 114mm BLK

BOX QTY 5 5 5 5

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

141


HARDWARE Fixed Hasp & Staple With Fixed Staple Ideal for use in applications with a 90° corner Available in plain steel or bright zinc plated Accepts shackle diameter up to 7/16” ITEM # 754680

DESCRIPTION Hasp/Staple Fixed 76mm ZP

BOX QTY 5

Adjustable Hasp & Staple Safety Hasp & Staple Design

HASP AND STAPLES

Adjustable staple compensates for shrinking or sagging of door Padlock lays flat when staple is in a vertical position Screws are concealed with hasp in latched position Available in: Bright Zinc Plated, Weathergard™ Galvanized ITEM # 754940 754945 755070 755075 755085

DESCRIPTION Hasp/Staple Safety 88mm ZP Hasp/Staple Safety 88mm GAL Hasp/Staple Safety 114mm ZP Hasp/Staple Safety 114mm GAL Hasp/Staple Safety 152mm ZP

BOX QTY 5 5 5 5 5

Lockable Hasp & Staple

Exclusive LifeSpan® Design Only locks by using key to prevent “lockout“ Functions as a latching hasp when unlocked LifeSpan® corrugated leaf up to twice as strong as flat leaf hasps Hold-open feature eliminates unwanted swinging Knuckle design and supporting side walls reduce sag Component parts plated prior to assembly Includes 2 nickel plated brass keys ITEM # 755235 755240

DESCRIPTION Hasp/Staple Keyed 88mm ZP Hasp/Staple Keyed 114mm GAL

BOX QTY 5 5

Double Fold Hasp & Staple With Fixed Staple For chest, cabinet, locker and door corners Double hinged Design conceals screws when hasp is locked Rust resistant zinc plated ITEM # 755250

142

DESCRIPTION Hasp/Staple DBL Fold 75mm ZP

Visit us at: www.stanleytools.com

BOX QTY 5


HARDWARE Extra Heavy Duty Hasp & Staple Zinc Plated For doors, chests and lockers Solid construction for added security Both hasp & staple accommodate a cup head bolt shank for even greater strength Rust resistant for all-weather applications ITEM # 755600

DESCRIPTION Hasp/Staple EX/HD 188mm ZP

BOX QTY 5

Extra Heavy Duty Hasp & Staple Stainless Steel Greater level of durability than zinc or gal 304 grade stainless steel construction Stainless steel fasteners included Passed ANSI/BHMA A156.18 (300 hrs) exposure test Striking double-blister packaging DESCRIPTION Hasp/Staple HD 190mm SS

BOX QTY 2

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

HASP AND STAPLES

ITEM # S808-725

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

143


HARDWARE

Broad Butt Hinges

Sizes: 100mm x 100mm, 100mm x 75mm Pins: Fixed Pin, Loose Pin Finishes: Zinc Plated, Brass Plated, Prime Coated, Stainless Steel, Polished Stainless Steel, Chrome Plated & Satin Chrome Plated

Easy-Fit (Non-Mortice) Hinges

Butt Hinges

Sizes: 35, 50, 70, 85 & 100mm Pins: Fixed Pin, Loose Pin Finishes: Zinc Plated, Brass Plated, Prime Coated, Stainless Steel, Florentine Bronze, Chrome Plated & Satin Chrome Plated

Parliament Hinges

Narrow Brass Butt Hinges

Lift-Off Hinges Sizes: 85 & 100mm Hands: Left & Right Hand Finishes: Brass Plated & Satin Chrome Plated

Radius Butt Hinges Sizes: 89mm Pins: Loose Pin Finishes: Zinc Plated, Brass Plated, Prime Coated, Stainless Steel, Florentine Bronze, Chrome Plated & Satin Chrome Plated

Radius Lift-Off Hinges

Sizes: 50, 65, 75, 90 & 100mm Pins: Fixed Pin, Loose Pin Profile: Centre Finishes: Zinc Plated, Brass Plated, Stainless Steel, Chrome Plated & Florentine Bronze

HINGES

Sizes: 100 & 125mm Pins: Fixed Pin Finishes: Zinc Plated, Polished Solid Brass, Zinc Plated

Sizes: 25, 38, 50, 63, 75, 90 & 100mm Pins: Fixed Pin Finishes: Polished Solid Brass

144

Visit us at: www.stanleytools.com

Sizes: 89mm Hands: Left & Right Hand Finishes: Brass Plated & Chrome Plated


HARDWARE

ITEM # H00018 H00024 H00019 H00025 H00020 H00026 H00312 H00313 H00021 H00027 H00022 H00028 H00023 H00029 H00284 H00285 H00030 H00034 H00310 H00311 H00031 H00035 H00032 H00036 H00033 H00037 H00038 H00039 H00040 H00041 H00042 H00043 H00044 H00045 H00046 H00047 H00048 H00049 H00050 H00051 H00052 H00053 H00054 H00055 H00056 H00057 H00290 H00293 H00058 H00059 H00060 H00061 H00062 H00063 H00064 H00065

DESCRIPTION Hinge Broad Butt FP 100x100 PSS Hinge Broad Butt LP 100x100 PSS Hinge Broad Butt FP 100x100 SS Hinge Broad Butt FP 100x100 SS Hinge Broad Butt FP 100x100 CP Hinge Broad Butt LP 100x100 CP Hinge Broad Butt FP 100x100 SC Hinge Broad Butt LP 100x100 SC Hinge Broad Butt FP 100x100 ZP Hinge Broad Butt LP100x100 SC Hinge Broad Butt FP 100x100 PC Hinge Broad Butt LP 100x100 PC Hinge Broad Butt FP 100x100 BP Hinge Broad Butt LP 100x100 BP Hinge Broad Butt FP 100x75 SS Hinge Broad Butt LP 100x75 SS Hinge Broad Butt FP 100x75 CP Hinge Broad Butt LP 100x75 CP Hinge Broad Butt FP 100x75 SC Hinge Broad Butt LP 100x75 SC Hinge Broad Butt FP 100x75 ZP Hinge Broad Butt LP 100x75 ZP Hinge Broad Butt FP 100x75 PC Hinge Broad Butt LP 100x75 PC Hinge Broad Butt FP 100x75 BP Hinge Broad Butt LP 100x75 BP Hinge Butt FP 35 PC Hinge Butt FP 35 ZP Hinge Butt FP 35 SS Hinge Butt FP 35 BP Hinge Butt FP 35 FB Hinge Butt FP 50 PC Hinge Butt FP 50 ZP Hinge Butt FP 50 SS Hinge Butt FP 50 FB Hinge Butt FP 50 BP Hinge Butt FP 70 PC Hinge Butt LP 70 PC Hinge Butt FP 70 ZP Hinge Butt LP 70 ZP Hinge Butt FP 70 SS Hinge Butt LP 70 SS Hinge Butt FP 70 BP Hinge Butt LP 70 BP Hinge Butt FP 70 CP Hinge Butt LP 70 CP Hinge Butt FP 70 SC Hinge Butt LP 70 SC Hinge Butt FP 70 FB Hinge Butt LP 70 FB Hinge Butt FP 85 PC Hinge Butt LP 85 PC Hinge Butt FP 85 ZP Hinge Butt LP 85 ZP Hinge Butt FP 85 SS Hinge Butt LP 85 SS

Bulk Hinges BOX QTY 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

ITEM # H00066 H00067 H00068 H00069 H00291 H00294 H00070 H00071 H00072 H00073 H00074 H00075 H00076 H00077 H00078 H00079 H00080 H00081 H00292 H00295 H00082 H00083 H00084 H00085 H00086 H00087 H00088 H00089 H00090 H00091 H00092 H00093 H00094 H00095 H00096 H00097 H00098 H00099 H00100 H00101 H00102 H00103 H00104 H00105 H00106 H00107 H00108 H00109 H00110 H00111 H00112 H00113 H00114 H00115 H00116 H00117

DESCRIPTION Hinge Butt FP 85 BP Hinge Butt LP 85 BP Hinge Butt FP 85 CP Hinge Butt LP 85 CP Hinge Butt FP 85 SC Hinge Butt LP 85 SC Hinge Butt LP 85 FB Hinge Butt LP 85 FB Hinge Butt FP 100 PC Hinge Butt LP 100 PC Hinge Butt FP 100 ZP Hinge Butt FP 100 ZP Hinge Butt FP 100 SS Hinge Butt LP 100 SS Hinge Butt LP 100 BP Hinge Butt FP 100 SS Hinge Butt FP 100 CP Hinge Butt LP 100 CP Hinge Butt FP 100 SC Hinge Butt LP 100 SC Hinge Butt FP 100 FB Hinge Butt LP 100 FB Hinge Butt FP 25 BRASS Hinge Butt FP 38 BRASS Hinge Butt FP 50 BRASS Hinge Butt FP 65 BRASS Hinge Butt FP 75 BRASS Hinge Butt FP 90 BRASS Hinge Butt FP 100 BRASS Hinge Non-Mortice FP 50 ZP Hinge Non-Mortice FP 50 BP Hinge Non-Mortice FP 50 SS Hinge Non-Mortice FP 50 FB Hinge Non-Mortice FP 65 ZP Hinge Non-Mortice FP 65 BP Hinge Non-Mortice FP 65 FB Hinge Non-Mortice FP 65 SS Hinge Non-Mortice FP 75 ZP Hinge Non-Mortice LP 75 ZP Hinge Non-Mortice FP 75 ZP Hinge Non-Mortice FP 75 BP Hinge Non-Mortice FP 75 FB Hinge Non-Mortice LP 75 FB Hinge Non-Mortice FP 75 SS Hinge Non-Mortice LP 75 SS Hinge Non-Mortice FP 90 ZP Hinge Non-Mortice LP 90 ZP Hinge Non-Mortice FP 90 BP Hinge Non-Mortice LP 90 BP Hinge Non-Mortice FP 90 FB Hinge Non-Mortice LP 90 FB Hinge Non-Mortice FP 90 SS Hinge Non-Mortice LP 90 SS Hinge Non-Mortice FP 100 ZP Hinge Non-Mortice LP 100 ZP Hinge Non-Mortice FP 100 BP

BOX QTY 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

HINGES

Bulk Hinges

145


HARDWARE

HINGES

Bulk Hinges

146

ITEM # H00118 H00119 H00120 H00121 H00122 H00315 H00314 H00123 H00124 H00125 H00126 H00127 H00128 H00129 H00130 H00306 H00131 H00132 H00133 H00134 H00135 H00136 H00137 H00138 H00139 H00140

DESCRIPTION Hinge Non-Mortice LP 100 BP Hinge Non-Mortice FP 100 FB Hinge Non-Mortice LP 100 FB Hinge Non-Mortice FP 100 SS Hinge Non-Mortice LP 100 SS Hinge Lift Off RH 85 SC Hinge Lift Off LH 85 SC Hinge Lift Off RH 85 ZP Hinge Lift Off LH 85 ZP Hinge Lift Off RH 100 ZP Hinge Lift Off LH 100 ZP Hinge Radius Lift Off RH 90 CP Hinge Radius Lift Off LH 90 CP Hinge Radius Lift Off RH 90 BP Hinge Radius Lift Off LH 90 BP Hinge Butt Radius LP 90 SC Hinge Butt Radius LP 90 CP Hinge Butt Radius LP 90 BP Hinge Butt Radius LP 90 ZP Hinge Butt Radius LP 90 FB Hinge Butt Radius LP 90 PC Hinge Butt Radius LP 90 SS Hinge Parliment FP 100 BR Hinge Parliment FP 125 BR Hinge Parliment FP 100 ZP Hinge Parliment FP 125 ZP

Carded Hinges BOX QTY 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 6 6 6 6

Carded Hinges ITEM # H00157 H00160 H00141 H00145 H00142 H00146 H00143 H00147 H00144 H00148 H00158 H00159 H00149 H00153 H00150 H00154 H00151 H00155 H00152 H00156 H00282 H00161 H00162 H00163 H00164 H00165 H00283

DESCRIPTION BOX QTY Hinge Broad Butt FP 100x100 SS Card-2 3 Hinge Broad Butt LP 100x100 SS Card-2 3 Hinge Broad Butt FP 100x100 CP Card-2 3 Hinge Broad Butt LP 100x100 CP Card-2 3 Hinge Broad Butt FP 100x100 ZP Card-2 3 Hinge Broad Butt LP 100x100 ZP Card-2 3 Hinge Broad Butt FP 100x100 PC Card-2 3 Hinge Broad Butt LP 100x100 PC Card-2 3 Hinge Broad Butt FP 100x100 BP Card-2 3 Hinge Broad Butt LP 100x100 BP Card-2 3 Hinge Broad Butt FP 100x75 SS Card-2 3 Hinge Broad Butt LP 100x75 SS Card-2 3 Hinge Broad Butt FP 100x75 CP Card-2 3 Hinge Broad Butt LP 100x75 CP Card-2 3 Hinge Broad Butt FP 100x75 ZP Card-2 3 Hinge Broad Butt LP 100x75 ZP Card-2 3 Hinge Broad Butt FP 100x75 PC Card-2 3 Hinge Broad Butt LP 100x75 PC Card-2 3 Hinge Broad Butt FP 100x75 BP Card-2 3 Hinge Broad Butt LP 100x75 BP Card-2 3 Hinge Butt FP 35 CP Card-2 5 Hinge Butt FP 35 PC Card-2 5 Hinge Butt FP 35 ZP Card-2 5 Hinge Butt FP 35 SS Card-2 5 Hinge Butt FP 35 BP Card-2 5 Hinge Butt FP 35 FB Card-2 5 Hinge Butt FP 50 CP Card-2 5

Visit us at: www.stanleytools.com

ITEM # H00166 H00167 H00168 H00169 H00170 H00171 H00172 H00173 H00174 H00175 H00176 H00177 H00178 H00179 H00180 H00181 H00182 H00183 H00184 H00185 H00186 H00187 H00188 H00189 H00190 H00191 H00192 H00193 H00194 H00195 H00196 H00197 H00198 H00199 H00200 H00201 H00202 H00203 H00204 H00205 H00206 H00207 H00208 H00209 H00210 H00211 H00212 H00213 H00214 H00215 H00216 H00217 H00218 H00219 H00220 H00221

DESCRIPTION Hinge Butt LP 50 ZP Card-2 Hinge Butt LP 50 ZP Card-2 Hinge Butt FP 50 SS Card-2 Hinge Butt FP 50 FB Card-2 Hinge Butt FP 50 BP Card-2 Hinge Butt FP 70 PC Card-2 Hinge Butt LP 70 PC Card-2 Hinge Butt FP 70 ZP Card-2 Hinge Butt LP 70 ZP Card-2 Hinge Butt FP 70 SS Card-2 Hinge Butt LP 70 SS Card-2 Hinge Butt FP 70 BP Card-2 Hinge Butt LP 70 BP Card-2 Hinge Butt FP 70 CP Card-2 Hinge Butt LP 70 CP Card-2 Hinge Butt FP 70 FB Card-2 Hinge Butt LP 70 FB Card-2 Hinge Butt FP 85 PC Card-2 Hinge Butt LP 85 PC Card-2 Hinge Butt FP 85 ZP Card-2 Hinge Butt LP 85 ZP Card-2 Hinge Butt FP 85 SS Card-2 Hinge Butt LP 85 SS Card-2 Hinge Butt FP 85 BP Card-2 Hinge Butt LP 85 BP Card-2 Hinge Butt FP 85 CP Card-2 Hinge Butt LP 85 CP Card-2 Hinge Butt FP 85 FB Card-2 Hinge Butt LP 85 FB Card-2 Hinge Butt FP 100 PC Card-2 Hinge Butt LP 100 PC Card-2 Hinge Butt FP 100 ZP Card-2 Hinge Butt LP 100 ZP Card-2 Hinge Butt FP 100 SS Card-2 Hinge Butt LP 100 SS Card-2 Hinge Butt FP 100 BP Card-2 Hinge Butt LP 100 BP Card-2 Hinge Butt FP 100 CP Card-2 Hinge Butt LP 100 CP Card-2 Hinge Butt FP 100 FB Card-2 Hinge Butt LP 100 FB Card-2 Hinge Butt FP 25 BRASS Card-2 Hinge Butt FP 38 BRASS Card-2 Hinge Butt FP 50 BRASS Card-2 Hinge Butt FP 65 BRASS Card-2 Hinge Butt FP 75 BRASS Card-2 Hinge Butt FP 90 BRASS Card-2 Hinge Butt FP 100 BRASS Card-2 Hinge Easy Fit FP 50 ZP Card-2 Hinge Easy Fit FP 50 BP Card-2 Hinge Easy Fit FP 50 SS Card-2 Hinge Easy Fit FP 65 ZP Card-2 Hinge Easy Fit FP 65 BP Card-2 Hinge Easy Fit FP 65 BP Card-2 Hinge Easy Fit FP 65 FB Card-2 Hinge Easy Fit FP 65 SS Card-2

BOX QTY 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5


HARDWARE

Carded Hinges Hinge Legend:

DESCRIPTION BOX QTY Hinge Easy Fit FP 75 ZP Card-2 5 Hinge Easy Fit FP 75 BP Card-2 5 Hinge Easy Fit FP 75 FB Card-2 5 Hinge Easy Fit FP 75 SS Card-2 5 Hinge Easy Fit FP 90 ZP Card-2 5 Hinge Easy Fit FP 90 BP Card-2 5 Hinge Easy Fit FP 90 FB Card-2 5 Hinge Easy Fit FP 90 SS Card-2 5 Hinge Easy Fit FP 100 ZP Card-2 5 Hinge Easy Fit FP 100 BP Card-2 5 Hinge Easy Fit FP 100 FB Card-2 5 Hinge Easy Fit FP 100 SS Card-2 5 Hinge Easy Fit FP 50 CP Card-2 5 Hinge Easy Fit FP 65 CP Card-2 5 Hinge Easy Fit FP 75 CP Card-2 5 Hinge Easy Fit FP 90 CP Card-2 5 Hinge Easy Fit FP 100 CP Card-2 5 Hinge Lift Off Right Hand 85 ZP Card-2 5 Hinge Lift Off Left Hand 85 ZP Card-2 5 Hinge Lift Off Right Hand 100 ZP Card-2 5 Hinge Lift Off Left Hand 100 ZP Card-2 5 Hinge Rad Lift Off Right Hand 90 CP Card-2 5 Hinge Rad Lift Off Left Hand 90 CP Card-2 5 Hinge Rad Lift Off Right Hand 90 BP Card-2 5 Hinge Rad Lift Off Left Hand 90 BP Card-2 5 Hinge Butt Radius LP 90 CP Card-2 5 Hinge Butt Radius LP 90 BP Card-2 5 Hinge Butt Radius LP 90 ZP Card-2 5 Hinge Butt Radius LP 90 FB Card-2 5 Hinge Butt Radius LP 90 CP Card-2 5 Hinge Butt Radius LP 90 SS Card-2 5 Hinge Parliment FP 100 BR Card-2 3 Hinge Parliment FP 125 BR Card-2 3 Hinge Parliment FP 100 ZP Card-2 3 Hinge Parliment FP 125 ZP Card-2 3

FP fixed pin LP loose pin, PSS polished stainless steel SS stainless steel CP chrome plate SC satin chrome ZP zinc plate PC prime coat BP brass plate FB florentine bronze BR brass.

HINGES / RATCHET TIE DOWNS

ITEM # H00223 H00223 H00224 H00225 H00226 H00227 H00228 H00229 H00230 H00231 H00232 H00233 H00234 H00235 H00236 H00237 H00238 H00239 H00240 H00241 H00242 H00243 H00244 H00245 H00246 H00247 H00248 H00249 H00250 H00251 H00252 H00253 H00254 H00255 H00256

4 Pc Ratchet Tie-Down Set

Size 25mm x 4.6m Through-dyed polyester webbing â&#x20AC;&#x201C; no bleeding or fading TPR coated ratchet handle for added durability and longevity Heat-sealed, non-fray ends Includes display box Cut Carton/6 Working Load Limit: 151kg Rated Breaking Capacity: 453kg ITEM # S881-987

DESCRIPTION 4 Pc Ratchet Tie Down Set 25mm x 4.6m

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

BOX QTY 6

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

147


HARDWARE

Door Closers Light Duty Residential - Hold Open Option High quality construction tested to 500,000 cycles Suitable for doors up to 30 kilograms Door hold-open feature 5 Year warranty Adjustable closing and latching speed Reversible for left or right swing Flexible mounting options: standard, parallel, top jam End and bottom covers to hide fixings Available in: ivory, bronze ITEM # S820-233 S820-241

DESCRIPTION Door Closer Residential Hold-Open Bnze Door Closer Residential Hold-Open Ivry

BOX QTY 2 2

DOOR CLOSERS

Door Closers Light Duty Residential – UL Listed High quality construction tested to 500,000 cycles Suitable for doors up to 30 kilograms UL Listed for fire safety applications 5 Year warranty Adjustable closing and latching speed Reversible for left or right swing Flexible mounting options: standard, parallel, top jam End and bottom covers to hide fixings Available in: ivory, bronze ITEM # S824-540 S824-557

DESCRIPTION Door Closer Residential UL Bnze Door Closer Residential UL Ivry

BOX QTY 2 2

Door Closers Medium Duty

Light Commercial/Residential – UL Listed High quality construction tested to 500,000 cycles Suitable for doors up to 65 kilograms UL Listed for fire safety applications 10 Year warranty Adjustable closing and latching speed Reversible for left or right swing Flexible mounting options: standard, parallel, top jam End and bottom covers to hide fixings Available in: ivory, bronze ITEM # S820-258 S820-266

148

DESCRIPTION Door Closer Resid/Light Comm UL Bnze Door Closer Resid/Light Comm UL Ivry

Visit us at: www.stanleytools.com

BOX QTY 2 2


HARDWARE

Door Closers Heavy Duty Light Commercial â&#x20AC;&#x201C; UL Listed High quality construction tested to 500,000 cycles Suitable for doors up to 83 kilograms UL Listed for fire safety applications 10 Year warranty Adjustable closing and latching speed Reversible for left or right swing Flexible mounting options: standard, parallel, top jam End and bottom covers to hide fixings Available in: silver, bronze DESCRIPTION Door Closer Light Commercial UL Brnz Door Closer Light Commercial UL Slvr

BOX QTY 1 1

Shelf Brackets - Decorative

ITEM # 250590 250591 250592 250593 250594 250595 250596 250597 250598

DESCRIPTION Bracket Traditional 177 x 203mm Blk Bracket Traditional 177 x 203mm Sat Nkl Bracket Traditional 177 x 203mm Ant Bnze Bracket Rustic 177 x 203mm Blk Bracket Rustic 177 x 203mm Ant Pwtr Bracket Rustic 177 x 203mm Ant Bnze Bracket Modern 177 x 203mm Blk Bracket Modern 177 x 203mm Sat Nkl Bracket Modern 177 x 203mm Wht

BOX QTY 10 10 10 10 10 10 10 10 10

Traditional Rustic

Modern

Shelf Brackets ITEM # 257545 250079 250509 250520 250531 250536 250547 250559 250565 250574 250585 250588

DESCRIPTION Heavy Duty Brackets Wht 304 x 203mm Folding Bracket Wht 279 x 127mm London Bracket Blk 127 x 152mm London Bracket Wht 127 x 152mm London Bracket Blk 158 x 203mm London Bracket Wht 158 x 203mm London Bracket Blk 203 x 254mm London Bracket Wht 203 x 254mm London Bracket Blk 254 x 304mm London Bracket Wht 254 x 304mm London Bracket Blk 304 x 355mm London Bracket Wht 304 x 355mm

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

BOX QTY 20 5 20 20 20 20 20 20 20 20 20 20

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

DOOR CLOSERS / BRACKETS

ITEM # S820-274 S820-282

149


HARDWARE

Hooks DESCRIPTION Heavy Duty Hook 127mm Card-2 Overhead Hooks 127mm Card-2 Ladder Hooks 203mm Card-2 Tool Hooks 95mm Card-2 Utility Hooks 182mm Card-2 All Purpose Hooks 127mm Card-2 Rafter Hooks 70mm Card-2 Hanging Rafter Hooks 146mm Card-2 Broom/Tool Hooks 70mm Card-2 Multi Tool Hook 182mm Card-1 Curved Hammer In Hooks 55mm Card-3 Angled Hammer-In Hooks 76mm Card-3 Large Curved Ham Hooks 142mm Card-2 Over-The-Door Hooks Card-2

HOOKS

ITEM # 819250 819260 819270 819280 819290 819300 819310 819330 819350 819360 819380 819390 819410 819430

150

Visit us at: www.stanleytools.com

BOX QTY 10 10 10 10 10 10 10 10 10 10 10 10 10 10


Page No.

Part No.

Page No.

Part No.

Page No.

Part No.

Page No.

02.130

80

5-16-264

68

12.060

47

15.836

43

03.608

80

5-16-265

68

12.078

47

15.837

43

0.11.911

36

5-16-266

68

12.100

46

15.839

43

0.11.921

36

5-16-267

68

12.102

47

15.862

43

0.11.952

36

5-16-268

68

12.116

47

15.905

43

1.92.050

126

5-16-269

68

12.134

47

15.993

43

1.92.070

126

10.049

35

12.151

48

15.994

43

1.92.217

124

10.099

32

12.152

48

15.995

43

1.92.748

125

10.099B

32

12.202

47

15.996

43

1.92.749

125

10.143P

34

12.204

46

16.007

70

1.92.762

126

10.150

34

12.220

47

16.050

72

1.92.766

125

10.151

34

12.312

47

16.286

72

1.92.767

125

10.179

32

12.313

47

16.287

72

1.92.768

125

10.189C

31

12.315

47

16.288

72

1.92.772

124

10.209

32

12.330

47

16.289

72

1.92.904

126

10.280

33

12.333

47

16.290

72

1.92.905

125

10.299

32

12.336

48

16.291

72

1.92.906

125

10.411

33

12.350

48

16.292

72

1.92.908

125

10.418

33

12.378

47

16.298

72

1.92.983

124

10.421

33

12.504

47

16.299

72

1.92.998

124

10.480

33

12.508

47

16.328

71

1.93.949

123

10.601RB

35

14.562

48

16.330

71

1.93.950

123

10.777

31

14.563

48

16.331

71

1.93.951

123

10.779

31

14.564

48

16.332

71

1.93.952

123

10.788

31

14.566

48

16.333

71

1.93.954

122

10.804

34

14.567

48

16.400

70

1.93.955

122

10.810

34

14.568

48

16.402

70

1.93.956

122

10.813

34

15.0009

44

16.403

70

1.93.957

122

10.815

31

15.0011

44

16.406

70

1.93.958

123

10.816

32

15.061

41

16.407

70

1.94.220

126

10.817

33

15.104A

41

16.409

70

2.11.921

36

11.040

37

15.150

42

16.410

70

5-16-251

68

11.300

37

15.166

42

16.413

70

5-16-252

68

11.301

37

15.275

41

16.415

70

5-16-253

68

11.325

37

15.281

39

16.418

70

5-16-254

68

11.911A

36

15.288

39

16.419

70

5-16-255

68

11.921A

36

15.289

39

16.970

69

5-16-256

68

11.988

36

15.352

40

16.971

69

5-16-257

68

12.003

46

15.556

41

16.973

69

5-16-258

68

12.004

46

15.599

39

16.975

69

5-16-259

68

12.005

46

15.774

44

16.977

69

5-16-260

68

12.006

46

15.829

43

16.978

69

5-16-261

68

12.007

46

15.830

43

16.979

69

5-16-262

68

12.020

47

15.831

43

16.980

69

5-16-263

68

12.045

46

15.835

43

17.202

40

INDEX

Part No.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

151


INDEX

Part No.

152

Page No.

Part No.

Page No.

Part No.

Page No.

Part No.

Page No.

17.204

40

33.433

7

35.410

10

47.140

18

17.206

40

33.731

7

35.425

11

47.312

19

18.790

72

33.732

7

35.426

11

47.314

19

20.046

39

33.825

7

35.440

11

47.403

19

20.047

39

33.893

7

35.444

9

47.440

18

20.074

39

33.894

7

35.445

9

47.443

18

20.087

39

33.963

7

35.464

10

47.480

18

20.088

39

33.964

7

42.073

14

47.482

18

20.112

41

33.966

7

42.074

14

47.483

18

20.222

39

33.967

7

42.075

14

47.681

18

20.405

42

34.073

11

42.076

14

47.803

19

20.531

42

34.075

11

42.193

15

47.821

19

20.556

40

34.077

11

42.287

15

47.822

19

20.600

41

34.105

9

42.291

15

47.827

19

20.807

42

34.107

9

42.294

15

47.828

19

21.102

50

34.108

9

42.540C

15

51.033

62

21.103

49

34.132

9

43.512

15

51.061

63

21.104

49

34.138

9

43.524

14

51.071

63

21.115

49

34.273

11

43.525

14

51.072

63

21.122

49

34.275

11

43.536

14

51.090

62

21.291

50

34.277

11

43.548B

14

51.091

62

21.293

50

34.791

9

43.549

14

51.109

63

21.295

50

34.792

9

43.572

14

51.164

61

21.296

49

34.792

9

43.609

14

51.533

63

21.297

50

34.794

9

43.624

14

51.534

63

21.299

50

34.795

9

43.625

14

51.537

63

21.393

51

34.814

8

43.636

14

51.952

61

21.398

51

34.824

8

43.648

14

54.000

63

21.399

49

34.953

11

43.648B

14

54.001

63

21.508

51

34.955

11

43.649

14

54.004

63

21.515

51

34.957

11

43.672

14

54.015

62

28.593

37

34.975

11

45.530

16

54.022

62

30.458

8

35.330

10

46.017

17

54.023

62

30.458M

8

35.331

10

46.053

16

54.070

63

30.459

8

35.332

10

46.060

16

54.072

63

30.459A

8

35.333

10

46.064

17

54.189

63

30.486

8

35.340

11

46.068

17

54.190

63

30.487

8

35.341

11

46.143

16

54.191

63

30.496

8

35.342

11

46.151

16

54.192

63

30.497

8

35.343

11

46.152

16

54.193

63

30.559M

8

35.400

10

46.222

16

55.099

65

30.656M

8

35.401

10

46.813

17

55.101

65

30.657M

8

35.402

10

46.825

17

55.102

65

33.429

7

35.403

10

47.099

18

55.104

65

33.432

7

35.409

10

47.101

18

55.114

66

Visit us at: www.stanleytools.com


Page No.

Part No.

Page No.

Part No.

Page No.

Part No.

Page No.

55.117

66

65.187

75

65.586

77

77.169

26

55.118

65

65.188

75

65.589

77

77.170

26

55.119

65

65.190

75

65.596

77

77.171

26

55.124

65

65.191

75

65.597

78

77.172

26

55.130

65

65.193

75

65.750

76

77.173

26

55.136

65

65.196

75

65.752

76

77.174

26

55.515

66

65.242

75

65.8000

76

77.188

25

55.525

66

65.520

77

65.966

74

77.189

24

56.001

61

65.521

77

65.967

74

77.191

26

56.004

62

65.522

77

65.968

74

77.202

26

56.705

64

65.523

77

65.969

74

77.203

26

57.528

64

65.524

77

65.970

74

77.204

26

57.530

64

65.525

77

65.971

74

77.227

21

57.531

64

65.532

78

65.972

74

77.227B

21

57.532

64

65.534

78

65.973

74

77.229

21

57.533

64

65.535

78

65.974

74

77.229B

21

57.534

64

65.540

77

65.975

74

77.500

27

57.550

64

65.541

77

65.980

74

77.720

27

57.551

64

65.542

77

66.052

79

77.730

27

57.552

64

65.543

77

66.344

80

83.004

53

57.554

64

65.544

77

67.546

74

83.005

53

58.111

66

65.545

77

68.0001

79

83.006

53

58.112

66

65.546

77

68.010

79

83.007

53

58.113

66

65.547

77

68.0102

79

83.008

53

58.114

66

65.548

77

69.264

88

83.124

53

58.230

66

65.549

77

69.265

88

84.001

54

58.911

66

65.550

77

69.266

88

84.002

54

58.912

66

65.551

77

69.331

88

84.003

54

58.913

66

65.553

77

69.332

88

84.004

54

58.930

66

65.554

77

69.335

105

84.006

54

60.039

78

65.555

77

69.335

88

84.007

54

60.060

78

65.559

78

69.799

94

84.008

54

65.005

75

65.561

77

77.018

28

84.011

54

65.157

75

65.563

77

77.110

28

84.091

58

65.162

75

65.570

77

77.152

25

84.092

58

65.163

75

65.571

77

77.153

23

84.093

58

65.164

75

65.572

77

77.154

24

84.094

58

65.166

75

65.573

77

77.155

23

84.095

58

65.167

75

65.575

78

77.156

22

84.121

57

65.169

75

65.576

78

77.159

22

84.123

57

65.171

75

65.580

78

77.162

26

84.131

57

65.172

75

65.582

77

77.163

26

84.133

57

65.173

75

65.583

77

77.164

26

84.139

57

65.180

75

65.584

77

77.165

26

84.150

57

65.183

75

65.585

77

77.168

26

84.151

57

INDEX

Part No.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

153


INDEX

Part No.

154

Page No.

Part No.

Page No.

Part No.

Page No.

Part No.

Page No.

84.271

57

86.347

107

86.542

108

87.667

109

84.272

57

86.348

107

86.543

108

87.668

109

84.273

57

86.349

107

86.544

108

87.669

109

84.274

57

86.350

107

86.546

108

87.670

109

84.294

54

86.351

107

86.547

108

87.671

109

84.369

58

86.352

107

86.580

109

87.672

109

84.881

58

86.362

107

86.581

109

88.000

108

84.971

57

86.363

107

86.845

108

88.146

107

84.972

57

86.364

107

86.946

108

88.147

107

85.610

59

86.365

107

87.057

109

88.176

107

85.762

59

86.366

107

87.058

109

88.177

107

85.763

59

86.367

107

87.069

109

88.788

108

85.764

59

86.368

107

87.070

109

88.789

108

86.004

106

86.369

107

87.071

109

88.790

108

86.007

106

86.370

107

87.072

109

88.791

108

86.011

106

86.371

107

87.074

109

88.792

108

86.022

106

86.380

107

87.075

109

88.793

108

86.024

106

86.381

107

87.076

109

88.794

108

86.025

106

86.407

106

87.077

109

88.795

108

86.026

106

86.408

106

87.078

109

88.796

108

86.027

106

86.411

106

87.079

109

88.798

108

86.028

106

86.414

106

87.080

109

88.799

108

86.029

106

86.415

106

87.081

109

88.800

108

86.030

106

86.418

109

87.082

109

88.802

108

86.102

106

86.419

109

87.083

109

88.803

108

86.103

106

86.420

109

87.084

109

88.815

108

86.104

106

86.421

109

87.430

59

88.816

108

86.105

106

86.422

109

87.431

59

88.817

108

86.106

106

86.423

109

87.432

59

88.818

108

86.107

106

86.424

109

87.433

59

88.819

108

86.108

106

86.425

109

87.434

59

88.820

108

86.109

106

86.426

109

87.435

59

88.821

108

86.112

106

86.427

109

87.621

59

88.822

108

86.206

106

86.461

108

87.622

59

88.823

108

86.207

106

86.462

108

87.623

59

88.824

108

86.211

106

86.463

108

87.624

59

88.889

108

86.214

106

86.464

108

87.625

59

88.930

106

86.260

107

86.480

108

87.626

59

89.505

102

86.261

107

86.481

108

87.660

109

89.506

102

86.338

107

86.482

108

87.661

109

89.507

101

86.339

107

86.483

108

87.662

109

89.508

103

86.343

107

86.484

108

87.663

109

89.509

104

86.344

107

86.485

109

87.664

109

89.511

106

86.345

107

86.540

108

87.665

109

89.512

106

86.346

107

86.541

108

87.666

109

89.516

102

Visit us at: www.stanleytools.com


Page No.

Part No.

Page No.

Part No.

Page No.

Part No.

Page No.

89.517

103

91.296

107

41134

82

41324

82

89.518

102

91.297

107

41149

81

41325

82

89.520

105

91.298

107

41160

83

41326

87

89.530

99

92.0002

131

41164

81

41329

82

89.531

101

92.0003

131

41165

81

41330

82

89.532

100

92.0004

132

41169

82

41334

82

89.534

100

92.0005

132

41170

82

41335

82

89.535

103

92.0006

133

41174

81

41339

82

89.536

101

92.020

129

41175

81

41341

82

89.537

104

92.022

129

41179

82

41343

84

89.540

105

92.031

127

41180

82

41344

84

89.541

105

92.057

128

41184

81

41345

84

89.542

105

92.060

128

41185

81

41346

84

89.600

99

92.063

128

41189

82

41349

86

89.811

103

92.070

128

41194

81

41350

86

89.813

104

92.142

129

41199

82

41354

86

89.817

106

92.561

127

41200

82

41355

86

89.818

106

92.564

127

41214

81

41359

86

89.819

106

92.565

127

41215

81

41360

86

89.858

55

92.804

97

41219

82

41364

86

89.859

55

92.808

97

41224

81

41365

86

89.861

55

92.809

97

41225

81

41369

86

89.862

55

94.374

98

41229

82

41370

86

89.867

55

94.375

98

41230

82

41374

86

89.868

55

94.376

98

41234

81

41375

86

89.869

55

95.112

95

41235

81

41380

82

89.870

55

95.113

95

41239

82

41385

87

89.872

56

97.073

109

41240

82

41390

87

89.873

56

41038

83

41244

81

41395

87

89.874

56

41040

83

41259

83

41400

87

89.875

56

41042

83

41260

83

41402

84

90.947

59

41044

83

41261

83

41404

84

90.948

59

41099

81

41264

83

41405

84

90.949

59

41100

81

41265

83

41409

84

90.950

59

41104

82

41270

83

41410

84

91.059

106

41105

82

41279

83

41411

84

91.132

107

41108

81

41280

83

41412

84

91.138

107

41109

81

41284

83

41414

84

91.151

107

41110

81

41300

83

41415

84

91.186

107

41111

87

41305

83

41419

84

91.283

107

41114

82

41310

86

41420

84

91.286

107

41115

82

41314

82

41424

84

91.287

107

41119

81

41315

82

41425

84

91.288

107

41124

82

41316

87

41429

84

91.289

107

41129

81

41320

82

41430

84

INDEX

Part No.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

155


INDEX

Part No.

156

Page No.

Part No.

Page No.

Part No.

Page No.

Part No.

Page No.

41431

84

41815

81

754544

141

991035

116

41442

85

41824

81

754550

141

991090

113

41446

85

41825

81

754551

141

991092

113

41450

85

41830

82

754579

141

991401B

120

41454

85

41835

84

754585

141

991404B

120

41458

85

41840

84

754680

142

991413

119

41462

85

41852

85

754700

141

991511

118

41466

85

41854

85

754701

141

991511

120

41474

82

41856

85

754705

141

991561

115

41476

82

41858

85

754940

142

992130

112

41480

82

41860

85

754945

142

992132

115

41482

82

41862

85

755070

142

992186

112

41486

82

41864

85

755075

142

992187

112

41496

85

41866

85

755085

142

992223

120

41552

84

41868

85

755200

141

992237

118

41562

86

41870

85

755201

141

992242

115

41562

86

41872

85

755210

141

992267

120

41564

86

41875

84

755211

141

992296

112

41566

86

41880

84

755235

142

992426

111

41595

83

41885

86

755240

142

994018

114

41599

86

41900

81

755250

142

994021

114

41600

83

250079

149

755600

143

994025

114

41603

85

250509

149

801600

141

994702

114

41664

82

250520

149

819250

150

994702

116

41664

83

250531

149

819260

150

994711

118

41666

86

250536

149

819270

150

994774

117

41669

81

250547

149

819280

150

994775

117

41674

81

250559

149

819290

150

995000

117

41679

81

250565

149

819300

150

995001

115

41684

83

250574

149

819310

150

995002

115

41704

85

250585

149

819330

150

995008

117

41705

85

250588

149

819350

150

995010

117

41706

85

250590

149

819360

150

995020

118

41707

85

250591

149

819380

150

995562

112

41708

85

250592

149

819390

150

996536

116

41710

81

250593

149

819410

150

996589

116

41724

81

250594

149

819430

150

996800

114

41734

81

250595

149

990101

112

996805

116

41735

81

250596

149

990103

112

996806

116

41790

84

250597

149

990105

115

997001

111

41795

84

250598

149

990401

111

997008

111

41800

87

257545

149

990403B

111

997013

111

41809

81

750910

141

990447

117

997641

113

41810

81

754540

141

990501

118

997654

113

41814

81

754543

141

990502

118

997663

114

Visit us at: www.stanleytools.com


Page No.

Part No.

Page No.

Part No.

Page No.

Part No.

Page No.

997670

113

H00051

145

H00096

145

H00141

146

997671

113

H00052

145

H00097

145

H00142

146

997687

113

H00053

145

H00098

145

H00143

146

997693

113

H00054

145

H00099

145

H00144

146

997852

119

H00055

145

H00100

145

H00145

146

997866

119

H00056

145

H00101

145

H00146

146

997875

119

H00057

145

H00102

145

H00147

146

998001

119

H00058

145

H00103

145

H00148

146

998025

119

H00059

145

H00104

145

H00149

146

998400

120

H00060

145

H00105

145

H00150

146

998404

120

H00061

145

H00106

145

H00151

146

998405

120

H00062

145

H00107

145

H00152

146

H00018

145

H00063

145

H00108

145

H00153

146

H00019

145

H00064

145

H00109

145

H00154

146

H00020

145

H00065

145

H00110

145

H00155

146

H00021

145

H00066

145

H00111

145

H00156

146

H00022

145

H00067

145

H00112

145

H00157

146

H00023

145

H00068

145

H00113

145

H00158

146

H00024

145

H00069

145

H00114

145

H00159

146

H00025

145

H00070

145

H00115

145

H00160

146

H00026

145

H00071

145

H00116

145

H00161

146

H00027

145

H00072

145

H00117

145

H00162

146

H00028

145

H00073

145

H00118

146

H00163

146

H00029

145

H00074

145

H00119

146

H00164

146

H00030

145

H00075

145

H00120

146

H00165

146

H00031

145

H00076

145

H00121

146

H00166

146

H00032

145

H00077

145

H00122

146

H00167

146

H00033

145

H00078

145

H00123

146

H00168

146

H00034

145

H00079

145

H00124

146

H00169

146

H00035

145

H00080

145

H00125

146

H00170

146

H00036

145

H00081

145

H00126

146

H00171

146

H00037

145

H00082

145

H00127

146

H00172

146

H00038

145

H00083

145

H00128

146

H00173

146

H00039

145

H00084

145

H00129

146

H00174

146

H00040

145

H00085

145

H00130

146

H00175

146

H00041

145

H00086

145

H00131

146

H00176

146

H00042

145

H00087

145

H00132

146

H00177

146

H00043

145

H00088

145

H00133

146

H00178

146

H00044

145

H00089

145

H00134

146

H00179

146

H00045

145

H00090

145

H00135

146

H00180

146

H00046

145

H00091

145

H00136

146

H00181

146

H00047

145

H00092

145

H00137

146

H00182

146

H00048

145

H00093

145

H00138

146

H00183

146

H00049

145

H00094

145

H00139

146

H00184

146

H00050

145

H00095

145

H00140

146

H00185

146

INDEX

Part No.

National Customer Service Centre: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand: 0800 478 265 Fax: 0800 278 265

157


INDEX

Part No.

158

Page No.

Part No.

Page No.

Part No.

Page No.

Part No.

Page No.

H00186

146

H00231

147

PHT350

93

S828–194

135

H00187

146

H00232

147

S808-543

140

S828–202

135

H00188

146

H00233

147

S808-550

141

S828–210

135

H00189

146

H00234

147

S808-568

141

S828–228

136

H00190

146

H00235

147

S808-592

139

S828–236

136

H00191

146

H00236

147

S808-600

139

S828–244

136

H00192

146

H00237

147

S808-618

140

S830–810

136

H00193

146

H00238

147

S808-626

140

S881-987

147

H00194

146

H00239

147

S808-634

140

SBN200K

90

H00195

146

H00240

147

S808-642

140

SDA250K

91

H00196

146

H00241

147

S808-659

139

SFN250K

91

H00197

146

H00242

147

S808-667

139

SFS100K

90

H00198

146

H00243

147

S808-675

139

SN9033K

91

H00199

146

H00244

147

S808-683

139

SWKBN050

93

H00200

146

H00245

147

S808-725

140

SWKBN625

93

H00201

146

H00246

147

S808-725

143

TR150

92

H00202

146

H00247

147

S808-758

139

TR150HL

92

H00203

146

H00248

147

S808-774

139

TR250

92

H00204

146

H00249

147

S808-782

139

TR45

92

H00205

146

H00250

147

S808-790

138

TRA204T

93

H00206

146

H00251

147

S808-808

138

TRA205T

93

H00207

146

H00252

147

S808-816

138

TRA206T

93

H00208

146

H00253

147

S808-824

138

TRA704T

93

H00209

146

H00254

147

S808-832

138

TRA705T

93

H00210

146

H00255

147

S808-857

138

TRA706T

93

H00211

146

H00256

147

S808-881

138

TRA708T

93

H00212

146

H00282

146

S808-899

140

TRA709T

93

H00213

146

H00283

146

S808-907

140

TRE550

93

H00214

146

H00284

145

S808-915

140

H00215

146

H00285

145

S808-923

140

H00216

146

H00290

145

S820-233

148

H00217

146

H00291

145

S820-241

148

H00218

146

H00292

145

S820-258

148

H00219

146

H00293

145

S820-266

148

H00220

146

H00294

145

S820-274

149

H00221

146

H00295

145

S820-282

149

H00223

147

H00306

146

S824-284

137

H00223

147

H00310

145

S824-292

137

H00224

147

H00311

145

S824-540

148

H00225

147

H00312

145

S824-557

148

H00226

147

H00313

145

S828–145

135

H00227

147

H00314

146

S828–152

135

H00228

147

H00315

146

S828–160

135

H00229

147

MR100CG

94

S828–178

136

H00230

147

PHT150C

93

S828–186

136

Visit us at: www.stanleytools.com


WARNING: Work Safely With Tools Wear Safety Goggles. Š2008 THE STANLEY WORKS: Stanley Australia, 82 Taryn Drive, Epping, Victoria 3076. Stanley Australia National Customer Service Centre - Phone: 1800 338 002 Fax: 1800 080 898 Stanley New Zealand - Phone: 0800 478 265 Fax: 0800 278 265


Stanley Hand Tools