Pryme fall prevention c&l

Established 1969

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599 INNOVATING

safety wellness SOLUTIONS

SAFEWORK SITES

Ph: 07 - 3326 1500

Email: Sales@cltoolcentre.com

&

SMALL FALLING OBJECTS WHAT YOU NEED TO KNOW ---NO LOOSE ENDS---

Established 1969

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

Email: Sales@cltoolcentre.com

SMALL FALLING OBJECTS

DANGERS OF SMALL FALLING OBJECTS This brochure provides a step-by-step guide to preventing Small Falling Objects with the latest in small falling objects prevention technologies and best industry practice.

Small falling objects pose serious hazards in the workplace. On most workplaces small objects are varied from hand held tools and equipment to small debris.

Small objects are high in number and their size makes them hard to control. Even a 1kg spanner dropped from a height of 4 metres will hit the ground travelling over 30km/h.

TOOLS

FALLING OBJECTS

Controlling the hazards small objects create pose a number of challenges. Without the correct controls, small falling objects can: • Cause injury and death • Damage property • Create tool damage • Damage equipment below • Lost time recovering fallen tools

SMALL FALLING OBJECTS

PPE

LARGE FALLING OBJECTS

PORTABLE EQUIPMENT

WORKER FALLS

MATERIALS & PARTS

DEBRIS

Ph: 07 - 3326 1500

Studies show that 30% of falling object incidents arise from mechanical, technical and design issues, whilst almost 50% occur from human error.

AUSTRALIA

According to the Notified Fatalities Statistics Report 2009-2010, 14% of fatalities in Australian workplaces from 2004-2010 were attributed to objects falling from heights.

NEW ZEALAND

In a report commissioned by the Ministry of Innovation & Employment, every year in New Zealand around 100 people die from fatal workplace injuries of which people struck by falling objects is a leading cause.

SINGAPORE

Workplace Safety & Health (2008) statistics show being struck by falling objects is the second most common cause of workplace fatalities in Singapore and a leading cause of workplace injuries.

EMPLOYER OBLIGATIONS

1

AUSTRALIA

NEW ZEALAND

SINGAPORE

Sections 34-38 of the Workplace Health & Safety (WHS) Act 2011, requires employers to minimise risks where reasonably practical to employees. To help Employers comply the WHS legislation, Safe Work Australia in 2012 published the “Falling Objects Fact Sheet” that requires tools and materials to be tethered when working at heights.

According to the publication, Guidelines for the Prevention of Falls to meet the Requirement of the Health Safety in Employment Act 1992, all tools and equipment are to be attached by a cord unless another effective method is used to prevent a falling hazard. AS/NZS 4488 also requires all tools and equipment to be tethered when working at heights.

In the Code of Practice for Working Safely at Height, section 10.2.7.4 stipulates that risks of falling objects must be mitigated, small tools must be secured to the person with the use of a lanyard.

The Act also requires employers not to merely follow the law but take reasonable practical steps to proactively reduce risk to Employees.

Established 1969

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

IDENTIFYING HAZARDS

TOP CAUSES OF FALLING OBJECTS

Prior to commencing any task that requires working from heights the following steps can help identify potential small falling object hazards.

1.

2.

3.

4.

5.

6.

7.

8.

9.

1. Inadequate risk assessment

Look for any environmental factors such as wind, rain, drafts, heat etc.

Identify sources of energy that can cause falling objects for example gravity, mechanical movement, electrical, pressurised equipment and vibration.

Prior to starting work visually inspect the area for preexisting hazards such as debris and loose items.

Make sure all safety securing features are in use.

Look for any collision or snagging hazard with fixtures and in particular moving or rotating machinery.

Pay special attention to corroded bolts and brackets.

Check what controls are in place for example: scaffolding, toe boards, barriers, netting, etc.

Inspect all equipment and tools for damage, attachment points, lanyards, lift buckets, ropes and tool belts.

Remove any loose items or equipment.

TO DOWNLOAD EDUCATIONAL TOOLS VISIT WWW.PRYME.NET.AU/SMALL-FALLING-OBJECTS

Email: Sales@cltoolcentre.com

WHAT YOU NEED TO KNOW

2. Human error 3. Inadequate procedures 4. Failed fittings and hazards 5. Poor housekeeping 6. Snaggings & collisions 7. Inadequate repairs & inspections 8. Neglected & home made tools 9. Inadequately stored or secured tools & equipment Source: Dropped Objects Awareness & Prevention: Reliable Securing. Revision 03. www.dropsonline.org

ELIMINATION

ENGINEERING

When working at heights, examples to eliminate small falling object hazards include: • Leave any tools and equipment not required for the job at ground level.

• Remove debris from the work area prior to commencing work.

• If there is any energy sources in the work area, such as mechanical rotation, if possible turn them off prior to starting the job.

• If environmental conditions pose a source of danger, such as strong winds, consider rescheduling work.

There are a number of engineering controls to minimise risks of falling objects, examples include: • Temporary work platforms, perimeter guard rails, safety mesh, industrial rope access systems, catch platforms, industrial safety nets, toe boards and rails. For more information refer to Managing the Risk of Falls at Workplaces, Safe Work Australia (2011).

• Tool lanyards and topped containers can also be utilised as engineering controls

SUBSTITUTION Hazards can be substituted for ones that pose a lower risk.

Examples include: • Consider prefabricating components at ground level and hoist into place.

• Investigate the possibility of substituting ladders for elevated work platforms.

PPE PPE is only to be used as a last resort to control risks, examples include: • Hard hats and steel capped boots.

• Individual fall arrest systems, such as harnesses, lifelines, etc.

For more information refer to Managing the Risk of Falls at Workplaces, Safe Work Australia (2011).

Ph: 07 - 3326 1500

RISK CONTROLS

ADMINISTRATIVE ADMINISTRATION When working at heights, administrative controls should be implemented, examples include: • “No Go” areas that prohibit unauthorised people from entering areas. Permit systems can also be used to restrict access.

• Sequence work to reduce risk, for example so trades are not working above and below each other at the same time.

• Staff training, risk assessment and safe work procedures. For more information Visit www.pryme.net.au/small-falling-objects to download your Free Educational Tools

SMALL FALLING OBJECTS WHAT YOU NEED TO KNOW --NO LOOSE ENDS--

2

Established 1969

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

Email: Sales@cltoolcentre.com

SMALL FALLING OBJECTS

The top 3 causes of falling objects are inadequate risk assessments, procedures and human error.

Inspecting the work environment by conducting a detailed risk assessment is crucial to identify these hazards and minimize the risk involved. In addition to large objects, untethered, and unsecured tools and equipment can be dangerous and can cause injury, damages and lost time.

Ph: 07 - 3326 1500

The following pages can help identify the correct tethering and storage solutions for your task to prevent small falling objects. After cataloguing and identifying sizes, weights and attachment points of your tools required for the job, use the following steps to ensure you leave no loose ends.

3

STEP

SELECT TAILS & TRAPS

Use Tails and Traps to create attachment points for tools and personal equipment without attachment points.

STEP

SELECT LANYARDS

Level of clearance, weight of tools and equipment, connection points, risk evaluation and different hazards such as electrical or tangle hazards all effect lanyard selection.

HELPING FIX THE ISSUE

STEP

SELECT HOIST BUCKETS, ACCESSORY ANCHOR & TOOL BELTS

Use the Accessory Anchor to create anchor points where they don’t exist. Use Hoist Buckets to secure and lift tools, materials, parts & debris. Secure smaller objects with Aerial tool belts.

HELPING FIX THE ISSUE

STEP

SELECT TIE HOOKS & GRABBERS

Use Tie Hooks to safely secure rope and cables. Use Grabbers to secure rags, gloves and similar equipment at heights.

HELPING FIX THE ISSUE

HELPING FIX THE ISSUE No attachment point means no tether for the object, creating a falling object hazard.

Safely tether all tools, equipment, PPE, parts, materials and debris to minimise hazards found at heights

Create safe options to tether small objects at heights, on the worker, and for lifting operations.

Help tidy work areas that cause fall hazards. Secure cable and rope to stop trip and tangle hazards.

GO TO P. 5

GO TO P. 9

GO TO P. 14

GO TO P. 18

Established 1969

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

Email: Sales@cltoolcentre.com

WHAT YOU NEED TO KNOW

Ph: 07 - 3326 1500

Falling objects are a leading cause of injuries and death in the workplace.

When working at heights, legislation requires tools to be tethered.

SMALL FALLING OBJECTS WHAT YOU NEED TO KNOW --NO LOOSE ENDS--

4

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

Established 1969

SELECT TAILS & TRAPS

Email: Sales@cltoolcentre.com

STEP

Catalogue all tools and equipment used at heights. For tools and equipment that do not have attachment points, select a tail and trap or a shackle.

1 SELECT TAIL WEB TOOL TAIL

ELASTIC LOOP TAIL

0.9Kg Max* MODEL NO.

PART NO.

4.5Kg Max* MODEL NO.

6.8Kg Max*

PART NO.

ELASTIC LOOP TAIL

PART NO.

MODEL NO.

19703 19704 3700

19767

3703

3703

3703EXT 19705

3703EXT

3713

WEB TOOL TAIL

19769

19765

19706

*Note - Max denotes the maximum weight of the item to tether

2 SELECT TRAP

SMALL FALLING OBJECTS WHAT YOU NEED TO KNOW --NO LOOSE ENDS--

Tool Trap

Ph: 07 - 3326 1500

WHAT TO DO...

5

Solution

Tool Trap Model Number

Tool Tail Model (Type)

Tool Diameter Min/Max (mm)

3723

3703 (Elastic)

16-38

3724

3703 (Elastic)

38-45

3726

3703EXT (Elastic)

45-63

SHRINK TRAP

Tool Diameter Min/Max With Capacity 16-32mm

0.9kgs

32-38mm

2.3kgs

32-38mm

2.3kgs

38-45mm

4.5kgs

45mm-57mm

4.5kgs

57mm-63mm

6.8kgs

3700 (Web)

TAPE TRAP

3750

0.9kgs All Diameters

All Diameters

3703 (Elastic)

OR

6.8kgs

Select a tail and trap or a shackle.

3 SELECT SHACKLE Shackle Solution

A

B

C

3790S

19mm

10mm

5mm A

3790M

26mm

12mm

5mm

3790L

32mm

16mm

8mm

3790XL

38mm

20mm

10mm

C B

Elastic loop Tool Tails™ provide retrofit attachment points to a variety of tools and equipment up to 6.8kg using Squids® Tool Traps™. These Tool Tails can also be used as an anchor point on belt, harness or separate structure.

KEY FEATURES • Stretch cord surrounded by tubular nylon webbing • Lock stitching at both ends for extra security • Adjustable barrel lock for tool attachment • Fully enclosed plated O-ring for secure attachment • Maximum safe working capacity 6.8 kg • Doubles as an anchor loop for belt, harness or separate

structure party tested using a 2:1 safety factor

• Third

DESCRIPTION Part No.

Description

Units

19767

3703 Standard 28cm Lime

Each

19769

3703EXT Extended 46cm Lime

Each

ERGODYNE® SQUIDS® 3713 ELASTIC LOOP TOOL TAILS SWIVEL

Elastic loop Tool Tails™ provide retrofit attachment points to a variety of tools and equipment up to 6.8kg using Squids® Tool Traps™. These Tool Tails can also be used as an anchor point on belt, harness or separate structure.

KEY FEATURES • Plated swivelling connection • Doubles as an anchor loop for

belt, harness or separate structure • Maximum safe working capacity: 4.6 kg • Third party tested using a 2:1 safety factor • Stretch cord surrounded by tubular nylon webbing • Lock stitching at both ends for extra security • Adjustable barrel lock for tool attachment

DESCRIPTION Part No. 19765

Description

Units

Swivel Elastic Loop Tool Tail

Each

Email: Sales@cltoolcentre.com

SMALL FALLING OBJECTS WHAT YOU NEED TO KNOW --NO LOOSE ENDS--

ERGODYNE® SQUIDS® 3703, 3703EXT ELASTIC LOOP TOOL TAILS

Ph: 07 - 3326 1500

Established 1969

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

6

Established 1969

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

Email: Sales@cltoolcentre.com

ERGODYNE® SQUIDS® 3700 WEB TOOL TAILS Web Tool Tails™ provide retrofit attachment points to a variety of tools and equipment up to 0.90kg using Squids® Tool Traps™.

KEY FEATURES • Ultra • Fully

strength nylon webbing enclosed plated D-ring for secure attachment • High tensile strength nylon thread • Web catch with double stitch for more durable stopping point • Available in five colour coded lengths • Third party tested using a 2:1 safety factor

DESCRIPTION Part No.

Description

Units

19703

Web Tool Tails (9cm) Black

Each

19704

Web Tool Tails (11.5cm) Orange

Each

19705

Web Tool Tail (14cm) Black

Each

19706

Web Tool Tails (16.5cm) Orange

Each

19708

Web Tool Tails (21.5cm) Black

Each

SMALL FALLING OBJECTS WHAT YOU NEED TO KNOW --NO LOOSE ENDS--

7

pryme.net.au

Ph: 07 - 3326 1500

ERGODYNE® SQUIDS® TAPE TRAP

USING SQUIDS® TAPE TRAPS

MEASURE IT

WRAP IT

HEAT IT

KEY FEATURES • Non-silicone

based makeup works well in a variety of

applications • No adhesives so it can be replaced without a • Sealed and set with heat application to finish

mess

application and secure and puncture resistant compared to other tool tapes • Material content and finish provides added grip to the handle of a tool • Maximum safe working capacity: 6.8 kg depending on length, tool, tail and lanyard used • Cut

LAY IT DOWN

TETHER IT

Captures Squids® Tool Tails™ securing a safe connection to tools like no other tool attachment tape on the market. Quickly wraps on a variety of hand tools, power tools and other equipment providing security and added grip

DESCRIPTION Part No.

Description

Units

19760

3705S - Tape Trap 3.65m Roll Each

19761

3705M - Tape Trap 9.14m Roll Each

Cold Shrink Traps capture Squids® Elastic Tool Tails™ creating a retrofit connection point for tethering.

PULL CORD TO ATTACH SHRINK TRAP TO TOOL & TAIL

KEY FEATURES • 19723

DESCRIPTION Description

Units

19723

Shrink Tool Trap 2.3kg

Each

19724

Shrink Tool Trap 4.5kg

Each

19726

Shrink Tool Trap 6.8kg

Each

TOOL READY FOR TETHER WITH SHRINK TRAP & TAIL

ERGODYNE® SQUIDS® TOOL SHACKLES

Ph: 07 - 3326 1500

Part No.

Fits tool diameter range 16mm - 32mm • 19724 Fits tool diameter range 32mm - 45mm • 19725 Fits tool diameter 45mm - 63mm • Cold Shrink technology from 3M requires no heat source • No additional tools needed to ensure a secure connection on tool • EPDM rubber material resists acids, alkalies and extreme temps • Patent Pending application is the quickest and easiest way to create an attachment point • Maximum safe working capacity: 6.8kg depending on tool, tail and lanyard used • Third party tested using a 2:1 safety factor

SMALL FALLING OBJECTS WHAT YOU NEED TO KNOW --NO LOOSE ENDS--

ERGODYNE® SQUIDS® 3723, 3724, 3726 SHRINK TOOL TRAP

Stainless steel U shaped shackles connect to waisted tools (tapered mid sections) or tools with captive holes, creating clean, secure attachment points for tethering.

KEY FEATURES • Stainless

steel (#304) material is corrosion resistant • One step retrofit attachment for temporary or permanent connection point • Connects around midsection of a waisted tool • Connects through eye of a captive tool to create a more accessible tethering point • Secure by adding a drop of adhesive and tightening with wrench or pliers • Maximum safe working capacity: 6.8 kg depending on model, tool and lanyard used

DESCRIPTION Part No. 19792

Description

Units

Small

Each

19793

Medium

Each

19794

Large

Each

19795

Extra Large

Each

Email: Sales@cltoolcentre.com

Established 1969

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

8

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

Established 1969

9

WHAT TO DO...

SELECT LANYARDS LANYARD FEATURE

SMALL FALLING OBJECTS WHAT YOU NEED TO KNOW --NO LOOSE ENDS--

Ph: 07 - 3326 1500

Email: Sales@cltoolcentre.com

STEP

Identify hazards in your at heights environment. Select lanyards to tether all loose tools, equipment & hoist buckets to minimise hazards identified in the risk assessment.

LANYARD MODEL NUMBER 3000 3001

3115

Weight Max (kg)

0.46

0.9

0.9

Minimise Tangle & Twist Hazard (Ideal for small tools & equipment)

Detachable

X

X

Retractable

X

X

Swivel

X

X

X

Minimise Marring Hazard

Single Loop

X

X

Minimise Sparking & Marring

Dual Loop

Extra Secure Connection Corrosive Environment

Locking Carabiner

Most Secure Connection Corrosive Environment

Dual Leg

Screw Gate

3104 3102 3100 3108 2.0

2.3

4.6

4.6

3111

3311

3119

6.8

6.8

9.0

X

X X

X

X

X

X X X

X

X

X

X

X

Triple Locking

ERGODYNE® SQUIDS® 3115 WRIST TOOL LANYARD Wrist Tool Lanyard: Tethers tools to help worker prevent injury, damage and lost productivity from dropped tools.

KEY FEATURES • Polyester webbing cuff secures to wrist • Ribbed pull cord • Adjustable barrel lock for tool attachment • Maximum safe working capacity: 0.9 kg • Tether length 19cm • Wrist Measurement: S/M 13cm – 18cm • Wrist Measurement: L/XL 18cm – 22cm

DESCRIPTION Part No. Description

Units

19042

Black S/M

Each

19052

Black L/XL

Each

X

X X

3001 LOOP

KEY FEATURES

Retractable tool lanyard with stainless steel carabiner attachment. Locks into place at desired length preventing tangles and work under tension while securing tools.

Self-setting pawls set desired lanyard length up to 122cm ABS thermoplastic housing for ultimate durability Nickel-plated swivelling top ring for 360 degree rotation Stainless steel carabiners (#304) for corrosion resistance Technora cord for ultimate strength and durability Modular quick connecting buckle for exchanging multiple tools • Adjustable barrel lock for tool attachment • 3000 Carabiner - Maximum safe working capacity: 0.46 kg • 3001 Loop - Maximum safe working capacity: 0.9kg • Patented design • • • • • •

DESCRIPTION Part No. 19300 19301

Description

Units

Carabiner

Each

Loop

Each

ERGODYNE® SQUIDS® 3025, 3026 RETRACTABLE ACCESSORIES Retractable tool lanyard attachments for quick exchange of multiple tools.

3025 CARABINER

KEY FEATURES Compatible with Retractable lanyards 3000 and 3001 • Modular quick connecting buckle for exchanging multiple tools •

DESCRIPTION Part No. Description

Units

19325

Compatible with 3000 Retractable Lanyards

Each

19326

Compatible with 3001 Retractable Lanyards

Each

Email: Sales@cltoolcentre.com

3000 CARABINER

SMALL FALLING OBJECTS WHAT YOU NEED TO KNOW --NO LOOSE ENDS--

ERGODYNE® SQUIDS® 3000 RETRACTABLE DUAL CARABINER ERGODYNE® SQUIDS® 3001 SINGLE CARABINER W/LOOP END

Ph: 07 - 3326 1500

Established 1969

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

3026 LOOP

10

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

Established 1969

Tool Lanyard-Single Carabiner: Tethers tools to help worker prevent injury, damage and lost productivity from dropped tools.

KEY FEATURES • Stretch

cord surrounded by tubular nylon webbing • Lock stitching at both ends for extra security • Aluminium carabiner • Adjustable barrel lock for tool attachment • Maximum safe working capacity: 4.6 kg • Standard 89cm-107cm • Extended 107cm-137cm

DESCRIPTION Part No. 19003 19013

SMALL FALLING OBJECTS WHAT YOU NEED TO KNOW --NO LOOSE ENDS--

Ph: 07 - 3326 1500

Email: Sales@cltoolcentre.com

ERGODYNE® SQUIDS® 3100, 3100EXT SINGLE CARABINER

11

Description

Units

Lime

Each

Lime - Extended Each

ERGODYNE® SQUIDS® 3119, 3119EXT TRIPLE-LOCKING DUAL CARABINER Tethers tools to help worker prevent injury, damage and lost productivity from dropped tools. Swivelling triple locking carabiners provide secure connection and prevent twisting and tangling while performing job.

KEY FEATURES • Stretch

cord surrounded by tubular nylon webbing • Lock stitching at both ends for extra security • Heavy-duty (8KN) triple-locking carabiner • Carabiner features 360 degree swivel captive-eye • Adjustable barrel lock for tool attachment • Maximum safe working capacity: 9.0 kg • Standard 89cm-107cm • Extended 107cm-137cm

DESCRIPTION Part No.

Description

Units

19029

Lime

Each

19039

Lime - Extended

Each

Tool Lanyard - Heavy-duty, Self Locking Carabiner: Carabiner self-locks to worker or anchor for added security. Shorter length helps prevent tools from hitting the deck.

KEY FEATURES • Stretch cord surrounded by tubular nylon webbing • Lock stitching at both ends for extra security • Heavy-duty (500kgf) self-locking carabiner • Adjustable barrel lock for tool attachment • Maximum safe working capacity: 4.6 kg • Standard: 71cm - 89cm

DESCRIPTION Part No. 19008

Description

Units

Lime

Each

ERGODYNE® SQUIDS® 3104 DETACHABLE DUAL LOOP Non-conductive and non-marring. Dual loop, interchangeable design eliminates all metal from lanyard. Great for working on or around sensitive surfaces or electrical applications.

SMALL FALLING OBJECTS WHAT YOU NEED TO KNOW --NO LOOSE ENDS--

ERGODYNE® SQUIDS® 3108 LOCKING SINGLE CARABINER

Email: Sales@cltoolcentre.com

Established 1969

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

KEY FEATURES cord surrounded by tubular nylon webbing • Lock stitching at both ends for extra security • Truly non-conductive with dual loop design • Perfect for scratch and damage sensitive surface work as non-marring option • Adjustable barrel lock for tool attachment • Modular quick connecting buckle for exchanging multiple tools • Maximum safe working capacity: 2.26 kg • Standard 89cm-107cm

Ph: 07 - 3326 1500

• Stretch

DESCRIPTION Part No. 19104

Description

Units

Lime

Each

ERGODYNE® SQUIDS® 3102, 3102EXT DETACHABLE SINGLE CARABINER Tool Lanyard - Detachable/Single Carabiner: Tethers tools to help worker prevent injury, damage and lost productivity from dropped tools. Compatible with #3103 Lanyard Loop.

KEY FEATURES Stretch cord surrounded by tubular nylon webbing • Lock stitching at both ends for extra security • Aluminium carabiner • Adjustable barrel lock for tool attachment • Quick connect buckle • Compatible with 3103: Detachable Lanyard Loops • Maximum safe working capacity: 2.26 kg • Standard 89cm-107cm • Extended 107cm-137cm •

DESCRIPTION Part No.

Description

Units

19063

Lime

Each

19073

Lime-Extended

Each

12

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

Established 1969

Twin Leg Triple Carabiner: Stainless steel carabiners with locking screw gates for a sure connection in more corrosive environments. Dual leg for multiple connections.

KEY FEATURES • Stretch

cord surrounded by tubular nylon webbing • Lock stitching at both ends for extra security • Twin leg for connecting multiple tools or having 100% tie-off of single tool • Stainless steel carabiners (#304) for corrosion resistance • Maximum safe working capacity: 6.8 kg • Captive eye carabiner with screwgate for locking connection • Standard 89cm-107cm

DESCRIPTION Part No. Description 19083

SMALL FALLING OBJECTS WHAT YOU NEED TO KNOW --NO LOOSE ENDS--

Ph: 07 - 3326 1500

Email: Sales@cltoolcentre.com

ERGODYNE® SQUIDS® 3311 TWIN LEG STAINLESS TRIPLE CARABINER

13

Lime

Units Each

ERGODYNE® SQUIDS® 3111, 3111EXT STAINLESS DUAL CARABINER

Stainless Steel Screw Gate Tool Lanyard - Dual Carabiner: Stainless steel carabiners with locking screw gates for a sure connection in more corrosive environments.

KEY FEATURES • Stretch

cord surrounded by tubular nylon webbing • Lock stitching at both ends for extra security • Stainless steel carabiners for corrosion resistance • Screwgate on carabiner for locking connection • Maximum safe working capacity: 6.8 kg • Standard 89cm-107cm • Extended 107cm-137cm

DESCRIPTION Part No. Description

Units

19027

Lime

19037

Lime - Extended Each

Each

Clamp Hard Hat Lanyard: Easily and comfortably secures a hard hat to a worker to prevent the item from falling.

KEY FEATURES • Comfortably

attaches to hard hats and other headwear • Easy release clamp attaches securely to just about anything • Comfortable high stretch elastic material • Hi-Vis Lime

DESCRIPTION Part No. Description 19155

Units

Lime

Each

STEP SELECT HOIST BUCKETS, ACCESSORY ANCHOR & TOOL BELTS

SMALL FALLING OBJECTS WHAT YOU NEED TO KNOW --NO LOOSE ENDS--

ERGODYNE® SQUIDS® 3155 CLAMP HARD HAT LANYARD

WHAT TO DO...

1. Select hoist buckets by identifying heavy equipment, parts, debris, materials required to be secured and/or hoisted.

2. Select tool belt & bag for smaller items carried by the worker.

3. Select accessory anchors to create attachment points .

Ph: 07 - 3326 1500

Established 1969

1 SELECT HOIST BUCKETS Model

Diameter (cm)

Height (cm)

Litres

Interior Pockets

Max Working

5740

32

43

34.2

1

68kg

5742

25

71

36.0

2

56kgs

5746

32

33

30.2

15

34kgs

2 SELECT TOOL BELT & BAG Model

5516

5518

Pockets

16

19

D-rings

3

4

Email: Sales@cltoolcentre.com

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

Select the 5728 bolt bag to secure small parts to the person working at heights

3 SELECT ACCESSORY ANCHORS Model

Length (cm)

Max Working KG

3175

60

181

14

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

Established 1969

Email: Sales@cltoolcentre.com

ERGODYNE® ARSENAL® 5746 TAPERED PLASTIC BOTTOM BUCKET-SWIVEL

Tall Safety Bolt Bag with Loop Design: Wide body and one-handed cinch-up top for keeping gear safe and secure

Tapered Plastic Bottom Bucket: Wide top for easy access to bucket contents.

Rope Handle

KEY FEATURES

KEY FEATURES

• Canvas • Moulded plastic base • Moulded plastic top ring • PP rope handle • 15 interior pockets • Heavy-gauge nylon

• Canvas • Patented

one-handed closure for safety and security • Nickel-plated rivets • 6- and 12-ply nylon stitching • 2 Exterior tool loops • Patented nickel-plated storm drain • Maximum safe working capacity: 12 Kg • 25cm x 13cm x 33cm

stitching • Nickel-plated swivel clip • Maximum safe working

capacity: 34kg mouth for easy loading • Diameter 32cm, height 33cm • Wide

DESCRIPTION

DESCRIPTION Part No.

SMALL FALLING OBJECTS WHAT YOU NEED TO KNOW --NO LOOSE ENDS--

14446

Ph: 07 - 3326 1500

ERGODYNE® ARSENAL® 5728 TALL SAFETY BOLT BAG

15

Description White

Units

Part No.

Each

14428

Description

Units

White

Each

ERGODYNE® ARSENAL® 5740T LEATHER BOTTOM BUCKET-SWIVEL WITH TOP

ERGODYNE® ARSENAL® 5742T TALL LEATHER BOTTOM BUCKET-SWIVEL WITH TOP

Leather Bottom Bucket w/ Snap: High wall, heavy duty bucket for strength and durability. Included detachable safety top.

Tall Leather Bottom Bucket: High wall, heavy duty bucket.

Tall design holds longer equipment. Rope handle with swivel snap. Safety top included.

KEY FEATURES • Canvas • Leather reinforced base • Moulded plastic top ring • PP rope handle • Interior pocket • Heavy-gauge nylon

KEY FEATURES • Canvas • Leather reinforced base • Moulded plastic top ring • PP rope handle • 2 interior pockets for

stitching

organization

• Nickel-plated swivel clip • Maximum safe working

• Heavy-gauge nylon stitching • Nickel-plated swivel clip • Maximum safe working

capacity: 68 kg 32cm, height 43cm • Patented safety top included • Diameter

DESCRIPTION Part No. 14540

capacity: 56 kg • Diameter 25cm, height 71cm • Patented safety top included

DESCRIPTION

Description

Units

Part No.

White

Each

14542

Description

Units

White

Each

• 1680D Ballistic Nylon • 16 pockets for tools and fasteners • Top cover flap with buckle closure • Three nickel-plated D-rings for tool

KEY FEATURES lanyard

attachment • Patented Storm Drains™ • Abrasion-resistant PVC-reinforced pouch • Maximum safe working capacity: 15 kg

DESCRIPTION Part No. 13640

bases

• 1680D Ballistic Nylon • Top cover flap with hook and loop closure • Four Nickel-plated D-rings for tool lanyard attachment • Patented Storm Drains™ • Abrasion-resistant PVC-reinforced pouch bases • Maximum safe working capacity: 15 kg

DESCRIPTION

Description

Units

Part No.

Grey

Each

13642

Description

Units

Grey

Each

ERGODYNE® SQUIDS® 3175 ACCESSORY ANCHOR

Tool Lanyard - Heavy-duty, Self Locking Carabiner: Carabiner self-locks to worker or anchor for added security. Shorter length helps prevent tools from hitting the deck.

KEY FEATURES • Heavy-duty 45mm Tetoron webbing strap • Nickel-plated iron D-Ring • Black 840D Nylon sleeve material • Heavy-gauge, contrasting color stitching • Maximum safe working capacity: 181 kg • Not for climbing or fall arrest

DESCRIPTION Part No. 19175

Description

Units

Lime

Each

Email: Sales@cltoolcentre.com

Aerial Tool Pouch/Loop Design: Easily attaches to any belt while keeping tools and fasteners secure.

KEY FEATURES

SMALL FALLING OBJECTS WHAT YOU NEED TO KNOW --NO LOOSE ENDS--

ERGODYNE® ARSENAL® 5518 19-POCKET AERIAL TOOL POUCH - LOOP DESIGN

ERGODYNE® ARSENAL® 5516 16-POCKET AERIAL TOOL POUCH

Ph: 07 - 3326 1500

Established 1969

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

16

SMALL FALLING OBJECTS WHAT YOU NEED TO KNOW --NO LOOSE ENDS--

Ph: 07 - 3326 1500

Email: Sales@cltoolcentre.com

Established 1969

17

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

& GRABBERS

ERGODYNE® SQUIDS® 3400 GRABBER Grabber: Keep gloves and other items handy.

Clips to almost anything. Patented.

KEY FEATURES • • • • • •

Clips to clothing, belts, tool belts, and D-rings Detachable, usable with ‘beeners, D-rings, etc.

Breakaway feature Dielectric / non-conductive material Durable, ultra-resilient acetal copolymer Patented design

DESCRIPTION Part No. Description

Units

19112

Black

Each

19117

Blue

Each

19118 Hi-Vis Orange

Each

19119

Each

Hi-Vis Lime

ERGODYNE® SQUIDS® 3510, 3530, 3540 TIE HOOK Tie Hook: Super duty, reusable tie hook for organizing and cinching hoses, cords, pipe and almost anything else.

KEY FEATURES Reusable sliding belt lock mechanism • High tensile strength, weather resistant Nylon 66 • Hi vis orange color • Excellent resistance to oil, salt, solvents, and alkali • Temp range: -40°C - 80°C • Patented design •

DESCRIPTION Part No. Description

3510 Recommended Load Limit

3530

3540

Units

33102

Small Hook 30cm

10kg

Each

33103

Small Hook 40cm

10kg

Each

33104 Small Hook 50cm

10kg

Each

33302

Large Hook 30cm

10kg

Each

33303

Large Hook 40cm

10kg

Each

33304

Large Hook 50cm

10kg

Each

33402

Large Locking Hook 30cm

20kg

Each

33403

Large Locking Hook 40cm

20kg

Each

33404

Large Locking Hook 50cm

20kg

Each

Email: Sales@cltoolcentre.com

1. dentify trip and tangle hazards. Use tie hooks to secure rope and cable.

2. Use grabbers to secure any loose items such as gloves and rags to the worker.

SMALL FALLING OBJECTS WHAT YOU NEED TO KNOW --NO LOOSE ENDS--

WHAT TO DO...

STEP SELECT TIE HOOKS

Ph: 07 - 3326 1500

Established 1969

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

18

Email: Sales@cltoolcentre.com

Established 1969

6 Armada Place, Banyo Qld 4014 (cnr of Nudgee Road) Ph: 07 3326 1500 Fax: 07 3326 1599

INNOVATING SAFETY AND WELLNESS SOLUTIONS

Since its launch in New Zealand in 1999, Pryme has established itself as an international leader in the innovation of safety and wellness solutions.

Operating in Australasia and Asia Pacific, Pryme has over 300 distributors and 700 outlets covering the safety, industrial, mining, automotive, electrical, sporting, hardware, mining and pharmaceutical sectors. Its products are used by some of Australia’s largest organisations.

Pryme has a strong international presence, with products in over 10 countries.

Ph: 07 - 3326 1500

Australia, South East Asia. Thailand, New Zealand, Indonesia, Vietnam, Malaysia, Papua New Guinea, South Africa, South Pacific, Singapore, USA (Los Angeles).

CONTACT AUSTRALIA ADDRESS

MAIL

Unit 10/38, Limestone Street Darra, QLD 4076 PO Box 1298 Kenmore QLD 4069

PHONE

+61 7 3374 4544

FAX

+61 7 3374 4768

WEB

www.pryme.net.au

NEW ZEALAND ADDRESS

MAIL

52A Stonedon Drive East Tamaki, Auckland PO Box 98726, SAMC Auckland

PHONE

+64 9 272 3075

FAX

+64 9 272 3095

WEB

www.pryme.net.au

SINGAPORE ADDRESS

PHONE FAX WEB

1015 Geylang East Ave 3 #04-105 Singapore 389730 +65 6743 9882 +65 6743 9887 www.ensscom.com

AJ885