Mercury Lane Closure for Futureproofing Works - Stage Two
Dear neighbours,
Following on from our initial Mercury Lane Closure Works notification (28 March) distributed last week detailing stage one works, we would like to provide information regarding stage two.
To minimise disruption to Auckland’s traffic network, stage two will take place across two – three weekends: The first weekend of works is 20 – 21 April. We will notify you about the other weekend closures once confirmed. This work is weather dependent and the contingency dates will be the next available weekend.
These works will take place across the Mercury Lane / Cross Street intersection (red in the first diagram below). During this period, Cross Street will not be accessible to vehicles via Mercury Lane. Pedestrian access through Mercury Lane, to apartments and businesses will be maintained, with additional signage installed when required.
Traffic controllers will be in place to manage vehicular access for residents and businesses at the top of Mercury Lane, the eastern end of Cross Street and the bottom of Mercury Lane.
Wilson Parking will remain open throughout the works and will be accessible via their respective entrances on Cross Street and Mercury Lane
The following diagram shows the traffic diversion routes that will be in place during stage two works. Please note that Cross Street will change to a two-way flow, so we advise drivers to take extra caution during this period. Vehicles coming from the eastern end of Karangahape Road will still be able to turn left onto Upper Queen Street during these works.
We will notify you of stage three works closer to the start date
What is the purpose of these works?
To ensure the neighbourhood is futureproofed for potential development, Link Alliance will be installing a mixture of high (22kV) and low (11kV) voltage cables within the road in Mercury Lane. We will also be installing pipework to connect the station to the local Watercare network during the same work window
These works require temporary closures of sections of the lane to vehicles. The closure will allow us to dig a 150-metre-long trench that will be used by Vector to futureproof power supplies. The trench is 1.2 metres deep and 1.2 metres wide.
Hours of work
The hours of work for stage two are 7am to 10pm, Monday to Saturdays and 7am to 10pm, Sundays. From time to time set up will begin before 7am and work may continue after normal hours.
How will these activities affect me?
Diversions for vehicles (shown above) will be in place for traffic accessing Cross Street and the lower section of Mercury Lane, as well as Canada Street via Mercury Lane. There may be delays associated with this diversion.
Aspects of this work will create noise, dust and vibration. At times we will be using a hydrovac machine, rock breaking attachments, and saw cutting equipment. The team will use noise mats to minimise disruption and we will undertake additional noise and vibration monitoring to ensure our activities are within consent guidelines
We are engaging local businesses regarding their potential impacts from works. If you have questions, please reach out to us (contact details below).
Where can I go for more information?
You can find a copy of our notifications and a list of frequently asked questions about these works by scanning the following QR code:
If you have any questions or concerns about these works, please email the Link Alliance Karanga-aHape Station team at karangahape@linkalliance.co.nz or phone 0800 CRL TALK and press option 4 for Karanga-a-Hape.