16 05 br brochure opt spreads nocrops

Sustainable Drinks Solutions Focused On Customer Service & Innovation

www.brewfitt.com

@brewfitt

brewfittltd

Brewfitt’s links to the industry were made in the 1950’s by Eric Paxman, the inventor and producer of the in-line ice bank beer cooler. To this day we are still a family owned company and very proud of the fact, providing the industry with all its drinks dispense requirements.

Brewfitt have strategic global partners that allow us to service all of our customer requirements whilst focusing on our own innovation and customer service.

We are a small enough organisation to care but large enough to deliver, our trading time is testament to this statement and commitment to all our customers and partners globally.

1

2

Utilising leading edge fluid dynamic technology to provide maximum efficiency in a minimum space, resulting in energy efficiencies and a lower carbon footprint.

• Saves pubs up to 40% on energy consumption • Saves pubs millions of litres of beer globally, which would normally be wasted on line cleaning • Savings of £3-5k annually for the average pub on electricity and beer wastage • £100m annual savings of electricity within the beer industry in the UK • Huge service level improvement • Options to increase line cleaning to 4 weeks • Full installations and service available • Variable dispense temperatures

3

Backed by a government grant from the Department of Environment the Future of Dispense system has been independently tested by research and development organisation Campden BRI

HOW IT WORKS

WASTE

SAVE

4 SHELF COOLER

3

NO NEED FOR ME WITH FOD

POD

V

TRADITIONAL BAR/CELLAR

CELLR COOLER

NO NEED FOR ME WITH FOD

3

4

SHORTER LINK LINES MEANS LESS BEER WASTAGE

COOLERS CAN BE A LONG WAY FROM THE BARREL CAUSING HUGE LOSSES IN THE LINE

2 NO NEED FOR ME WITH FOD

1 COOLER

COOLER

1

BEER WASTAGE

2

CLUTTERED CELLAR & BAR

3

INEFFICIENT SYSTEMS

4

1

!

2

This is NOT a line cleaning solution!

FOD removes the volume of beer in the system.

Taking the average pub with 16 taps, the coils within the cooler and link lines can hold up to 2 pints of beer resulting in excessive wastage.

This wastage is saved with FOD.

Two remote beer coolers are required within a traditional system taking up cellar space. Shelf coolers and pods also take up space below the bar.

The beer travels from the keg, through the link lines, through the remote cooler and up to the tap. This is inefficient as 1/2 a pint of beer can be lost through the link line per clean.

INCREASED COSTS

FOD ONLY REQUIRES ONE COOLER TO WORK IN CONJUNCTION WITH THE COOLTUBE

The bar can be cluttered with shelf coolers and pods which are required as secondary cooling resources. These not only waste space, create heat and waste beer but can also cost the venue £350 per shelf cooler per annum to run.

1

SAVING BEER

2

SAVING ENERGY

3

SAVING SPACE

4

SAVING MONEY

No link lines or cooler coils are required with FOD which means less beer is wasted and is cooled at the point of dispense. This could be up to approx 1500 pints per annum in an average pub with 16 taps.

One beer cooler can service the entire bar, resulting in improved cellar space and approx £900 in electricity and system savings. Possibility to remove cellar cooling.

No shelf coolers or pods are required at the bar resulting in electricity savings and improved space.

Beer discarded down the drain line through line cleaning, space saving and energy saving could save each venue a massive £3-5K per year. To find out more call Curtis Paxman on 01484 340800.

Our Future of Dispense Customers

5

The World’s smartest and smallest heat exchanger for drinks dispense.

• • • • • • • • •

• • •

Over 6 times smaller and lighter than standard heat exchangers Holds up to 80% less coolant than other products Has a superior delta T in comparisons to other products Has the equivalent of 18 meters of product coil So compact and lightweight that it doesn’t need fixing into position Fits into the most confined spaces including directly under the fontsaving valuable space behind the bar Has over 4 times more cooling surface area per ml of product than a standard heat exchanger Dispensed drinks temperatures can be within 1ºC to 2ºC of the python recirculation temperature Consistent dispensed temperatures due to the low volume of product within the CoolTube and its unique heat exchange technology. Thus removing any dwell pint issues Scope to include the technology inside the point of dispense Only 40ml of product in the coil Variable dispense temperatures on each CoolTube using a valve

6

2Flow is the ultimate drinks cooling innovation of the 21st century!

2Flow is a revolutionary new coolant liquid designed to freeze at sub-zero temperatures. More and more breweries and brand owners around the world are switching over to the 2Flow solution, as the trend towards extra cold drinks becomes a paramount requirement for their customers.

2Flow replaces water and glycol in existing ice bank beer and soft drinks coolers in order to provide you with an extra cold brand specification, without the need for purchasing extra or enhanced capital equipment.

Our Specialist Range Of Coolants

7

2Flow is an ultra cool, low cost liquid innovation that replaces water or glycol in your current drinks cooling systems in order to provide you with an extra cool brand specification •• Specialist liquid coolant with an accurate range of freeze points available (eg. -2°C -3°C) •• The perfect solution for all ice bank beer coolers •• Superior thermal and heat transfer properties •• Reduces cooler energy consumption •• A stable, non-toxic and non-corrosive cooling solution •• Provides a uniform, crystalline ice store with excellent energy reserves •• A pre-mixed and concentrate solution •• Improves cooler performance •• Patent protected

8

COOLFLOW DTX for BREWERY PLANTS and cooler HEAT DUMPS has been especially formulated to exploit the advantages Ethylene Glycol has over Propylene Glycol. Specifically; •• Major advantages over Mono-Propylene Glycol •• Less viscous thus easier to recirculate especially at lower temperatures •• Considerably more stable than MPG •• Less energy consumed •• Less volume for the same freeze protection, more cost effective •• Cheaper per litre •• Biodegradable (90% over 10 days) •• Contains scale & biological inhibitors to prevent fouling and promote longer operational life & higher thermal efficiency •• Miscible with water and can operate as low as -50°c depending on concentration levels •• Can be supplied in 5/10/15/20/25/205 & 1000 litre containers and in bulk

9

10

DISPENSE FONTS For our full font range please visit our website or request a brochure

www.brewfitt.com

11

Cobra Range

Lotus Tower

Ceramic Tower

Easy Tower

Brahaus Tower

Havana Range

ADS2 Tublar Font

Azur Tower

Cobra B3 with LED

Only a selection shown, see website for full version www.brewfitt.com

12

Customised Off The Shelf Fonts

1

2

3

CHOOSE YOUR COLOUR

CHOOSE YOUR FINISH

ADD YOUR BRANDING

Bespoke Offering an impressive variety of dispense fonts, Brewfitt work in partnership with leading manufacturer Celli, to supply the UK market with a wide range of solutions to suit all styles and budgets. Bespoke fonts can make your brand stand out at the bar, speak to Brewfitt today about your unique requirements.

14

BRING YOUR BRAND TO LIFE 15

Frog Eye Badges Bring Your Brand To Life!

What is a Frog Eye Badge?

A Frog eye lens is a wide-angle lens that takes in a broad, panoramic and hemispherical image, displaying extremely wide angles. Brewfitt’s lenses add an extra dimension to any brand.

What are the benefits?

•

• •

•

•

An innovative addition which brings your brand to life at the tap Creates impact, making your brand instantly recognisable Each badge is custom made to your specific brand requirements; colour and design are all chosen by you A cost effective way to revolutionise your brand at the tap, making it stand out against competitors Low quantities can be produced

16

17

Celtic Taps

FC4 TAPS

Branded Tap Handles

Various Branded Tap Handles

Globus Tap

St Aceline Tap

Bespoke tap handles also available

Taps & Handles

Accessories From cellar to point of sale, Brewfitt pride themselves on offering first class customer service to ensure you have everything from keg couplers to branded lenses for your dispense needs.

18

CO 2 & Mixed Gas Regulators Brewfitt supply world leading Tof regulators along with all accessories to allow seamless supply of all Co2 and mixed gas requirements for new and remanufacture.

TOF pressure regulators fully meet the highest international standards, according to the provisions of the UNI EN ISO 2503 standard and UK legislation.

19

Foam Stop Brewfitt introduces Beer Foam Stop, a device currently used throughout Europe to massively reduce fob in installations where Co2/N2 systems are in place, this compact patented device connects directly to any standard keg coupler and massively reduces the amount of air which escapes from a keg as it empties.

Features & Benefits •• Closed system-improved hygiene •• Potential to use recirculation feeds to the coupler resulting in less cleaning frequency •• Simple effective and ideal for small 1 to 2 tap •• •• •• ••

installations No traditional fob detector to get contaminated Simple operation at keg change Includes shut off valve for safety/after hours Quick & low cost installation

20

Beer, Wine & Post Mix Coolers Brewfitt can offer a full range of hydrocarbon and eco friendly cooling technology to suit any requirements for any type of beverage. For our complete product range please contact our sales department.

21

22

T: +44(0)1484 340 800 E: SALES@BREWFITT.COM W: BREWFITT.COM Brewfitt Limited, International House, Penistone Road, Fenay Bridge, Huddersfield, UK, HD8 0LE

www.brewfitt.com @brewfitt brewfittltd