Savercall 3000 eng

Home Security System

SAVERCALL-3000 User Manual

Hyun Joung System Co., Ltd. Features or exterior may change for improved performance without notice.

IMPORTANT – PLEASE READ THIS SECTION FIRST Savercall-3000 is a Do-It-Yourself Wireless Security System designed to help users protect themselves, their loved ones, and their property and personal possessions. Please read through the important information below before getting started with Savercall-3000.

•

Carefully follow the instructions in this manual when installing, setting up and programming Savercall-3000

•

Take special notice of any specified notes, bullet points, and so on throughout this manual Warning: Please take the following precautionary measures or it may lead to serious injury or fatality.

- Do not touch the power switch, adapter or power cord with wet hands.

- Do no place the unit in dusty areas, and avoid exposing the power cord to heat.

- Do not disassemble or apply shock to the unit, which may lead to electric shock or short circuit.

- Do not pull the power cord - hold the plug to pull out and cut power.

- This unit is set to work with 230V power source exclusively.

Warning: Please take the following precautionary measures or it may lead to minor injury or damage to the product.

2

1.

Keep Savercall-3000 away from water or damp areas.

2.

Do not use in hot temperatures or humid areas.

3.

Do not install Savercall-3000 in direct sunlight or near extreme heat.

4.

Do not install Savercall-3000 near strong electrical current or magnetic force.

5.

Avoid dropping Savercall-3000 or placing it in an area with strong vibration.

6.

Do not disassemble the product – doing so will render the Warranty void.

7.

If elderly people or pregnant women wish to test the siren, please test from a substantial distance away (about 33ft).

8.

Use soft fabric to clean the unit.

- Using water, alcohol, benzine, or thinner may cause damage to the unit.

9.

Do not let pins, dust, or foreign substances enter the interior of the unit.

10. Turn off the power when inserting the adapter for DC input.

- Use only the adapter provided by our company. We will not be responsible for any damage caused from using nonstandard adapters.

3

11. Disconnect the plug from the power source when the unit is not used for a long period of time.

12. If strange noises are heard while operating the unit, turn off the power and contact your local service center.

13. The warranty period of the rechargeable battery is 6 months.

The battery’s life will shorten with time. Check the battery every 3 months for proper operation. Use only the battery provided by our company when replacing with a new one.

14. Do not connect the keyphone (local switchboard controller) to Savercall-3000 or it may cause damage to the product.

15. When lightning is expected, disconnect the phone line from the unit for protection.

To better understand Savercall-3000 and its performance capabilities, users should test the entire system at least once a week

Hyun Joung Systems Co., Ltd. is a company focused on ensuring our customers the greatest level of satisfaction. If you have any comments or questions, feel free to contact us at: Or visit our website at: www.hjsys.co.kr

4

CONTENTS Section

Page

Savercall-3000 Features & Benefits ……………………….. 8-11 Main Components & Optional Accessories …………………….. 12 Main function …………………………………………………………..13 Over view of Savercall-3000 …………………………………..14-15 Details of main unit & sensors…………………………………….. 16 - Main Unit……………………………………………………………………………………….. 16 - Remote controller ………………………………………………………………………….. 17 - Door Sensor ………………………………………………………………………………….. 18 - Motion Detector …………………………………………………………………………….. 19

Installation & Setup ………………………………………………… 20 How to install Motion Detector…………………………………………………………….. 21 How to install Door Sensor …………………………………………………………………. 22 Initial Setup ………………………………………………………………………………………. 23 Menu Summary …………………………………………………………………………………. 24

Main Menu(How to set up Main Unit) ……………………………………………… 25 1-To set password …………………………………………………………. 25 2-Sensor registration ………………………………………………………26 - Remote controller ………………………………………………………………………. 26 - Door Sensor ………………………………………………………………………………. 28 - Motion Detector …………………………………………………………………………. 30 3-Record user message ……………………………………………… 31-32 4-To input alarm delay time …………………………………………32-33 5-To input telephone number ……………………………………… 34-37 5

6-To set up the current time/day …………………………………. 37-38 0-To finish setting mode …………………………………………………. 39 7-To set up additional menu ……………………………………………. 39

Additional Menu ……………………………………………………. 40 1-To set up delay tone sound ………………………………………… 40 2-To set up remote controller sound ………………………………. 40 3-To set up chime bell sound ………………………………………… 41 4-To set up ringer sound ……………………………………………… 41 5-To set up CID function ……………………………………………… 42 6-To set up morning call ………………………………………………. 43 7-To set up automatic controller mode ………………………. 44-46 8-To set up siren activation time ……………………………………. 46 9-To set up ringer time ………………………………………………… 46 To set up guide volume …………………………………………………47 O-To finish additional menu ………………………………………….. 48 To finish setting mode …………………………………………………. 48

Examples of How Savercall-3000 Works ……………………… 49 Burglary Example ………………………………………………………… 49 Emergency call Example ……………………………………………….. 50

User Guide …………………………………………………………….. 51 1-To enter setting mode ………………………………………………. 51 2-To enter alarm away mode ………………………………………… 51 3-To enter alarm home mode ………………………………………… 52 4-To return to wait mode ………………………………………………53 5-To make an emergency call ……………………………………….. 53 6-Receiving & Responding to an alarm notification call …. 54-58 7-To remote control Savercall-3000 via Telephone ……….. 58-60 8-How to use telephone with main unit ……………………… 60-61 6

9-How to use CID function ………………………………………. 61-64 10-How to use siren with main unit ……………………………….. 64 11-LED status according to mode & status ………………………. 65 12-In case of disconnection of telephone line ………………….. 65 13-In case of power failure ………………………………………….. 66 14-In case of low sensors battery ………………………………….. 67 15-In case of changing the characteristics of sensors …… 67-70 16-How to check LCD & delete the record in the event of a situation 70-71

Savercall-3000 Specifications ……………………………………. 72 Savercall-3000 Optional Sensors ……………………………….. 73 Troubleshooting (Q & A) ……………………………………… 74-75 Technical Support, Customer Care & Sales …………………… 76 Warranty Information ………………………………………… 77-78

7

Savercall-3000 Features & Benefits Feature Do-It-Yourself Wireless

Benefit •

System

FM frequency: Up to 150ft. range covers the entire house, apartment, small business, etc.

•

No hard-wired installation necessary

•

Simple screw-in or double-sided tape mounting

LCD display and Voice-

•

Simple programming & operation

Guided Setup &

•

Very user-friendly

•

Voice-prompts for responses

•

All setup & programming options

Operation

are Password-protected Remote Control

•

Allows for easy “alarm on”, “alarm off” & emergency calls directly from the remote controller

“Alarm away” & “Alarm

•

home” Security Modes

Various programming & arming options for “Alarm away” or “Alarm home” mode.

•

Support of “Alarm home” mode without Motion detector

CID(Caller-ID) function

•

It saves maximum 20 phone numbers

•

Supports redial function

8

Automatic mode

•

conversion

Supports automatic conversion among alarm-home, alarm-away and off mode

Record of sensor

•

User can assign conversion time

•

Records what caused sensor

activation

activation.

•

User can check memory through remote control and LCD.

Support of wire

•

extension port

Support of various wire sensors as an option

Loud Siren

•

Immediately deters intruders

(Including built-in siren)

•

Alerts users, neighbors & others of an Alarm Activation

Auto-Dialer

•

Automatically calls up to five specified phone numbers upon alarm activation & plays prerecorded voice messages

•

Voice-prompts for responses

•

Can call out & notify any telephone, cellular phone of an Alarm Activation

SOS call function

•

Auto-dialer function through SOS button on Main unit & Remote controller

9

Phone line disconnection

•

alarm Powersupply disconnection

phone line is disconnected •

alarm Remote Operation via

Voice and LCD notification when

Voice and LCD notification when power supply is disconnected

•

Telephone

Call in to alarm-home, alarm away & program system from anywhere in the world

•

Monitor situation or speak directly to an intruder

Exclusive Integrated

•

Speakerphone (Telephone function)

Usage as a telephone through speakerphone

•

Allows for advanced 2-way voice communication

•

Converse with emergency personnel during an on-site crisis situation

1-button Emergency Call

•

(SOS call function)

Make on-site emergency calls directly from remote controller & main unit by pressing SOS button

•

Call out to emergency personnel during on-site panic or crisis situations

Various additional

•

functions Rechargeable Backup

Support of various functions such as chime bell alarm, wake-up call, etc.

•

Backs up Main unit in the event of a 10

Battery Long-Life Sensor

power outage •

Batteries

Door Sensor & remote controller contain replaceable long-life batteries

•

Notifies users of any low-battery situation

Memory Chip Stores All Programmed Data

•

Retains programmed settings for all User Functions, even during power outages

11

Main Components & Optional Accessories

Main Unit

Wired Siren

Motion Detector

Motion Detector (Battery AA1.5V X 4EA)

Adapter

AC230V 50Hz (DC9V, 500mA)

User Manual

Door Sensor

Door Sensor

12

Bracket

(Battery AAA1.5V X 2EA)

Door Sensor Spacer

Warning Sticker

Remote Controller

Telephone Line 2EA

Pocket Manual

Main Function * As a multifunctional wireless security system, SAVERCALL-3000 provides a reliable, complete security solution for the home or office.

Motion Detector

Door Sensor

Fire Sensor (Optional)

Wireless Repeater/ Siren (Optional)

Wired Siren

Remote controller

Telephone Line

Call out to emergency personnel during on-site panic or emergency situations 230V AC POWER SOS

Automatically calls up to five programmed phone numbers upon alarm activation and plays pre-recorded voice messages Listen in on the situation or speak directly to the person who inside

“SOS” button In the event of an emergency situation, press “SOS’ button for more than 2 seconds.

13

Overview of Savercall-3000 1. In case of intrusion 1) Door sensor or Motion detector will detect intrusion, and Savercall-3000 will sound alarm.

2) Siren will sound, and ‘Alarm notification call’ will call the programmed phone numbers.

3) SAVERCALL-3000 will call the first phone number.

4) If the call is answered, SAVERCALL-3000 will notify the situation and play the recorded user’s message. After this process, the menu will be voice guided to allow the receiver to control remotely.

•

If the receiver answers the phone, Savercall-3000 will operate upon the user’s selection.

•

If the receiver doesn’t press 0, Savercall-3000 considers the phone not answered even if the receiver answered the phone, and tries to call the next phone number. If there is no answer, Savercall-3000 repeats this process three times.

2. Emergency call 1) An emergency situation occurs within the detection range of SAVERCALL –3000.

2) The user should press the “SOS” button of the remote controller or main unit.

3) SAVERCALL –3000 immediately dials the programmed phone number.

14

3. Voice Guided Menu for Alarm Notification Call - To speak (no.1) - To wiretap (no.2) - To start siren (no.3) - To enter ‘Wait mode’ (no.4) - To stop all dialing (no.8) - To hang up the phone and dial the next phone no (no.9) - To hear repeatedly (no.0) 4. Voice Guided Menu for Remote Control Mode - To speak (no.1) - To wiretap (no.2) - To start siren (no.3) - To enter ‘Wait mode’ (no.4) - To enter alarm away mode (no.5) - To enter alarm home mode (no.6) - To stop remote control (no.9) - To hear repeatedly (no.0)

15

Details of main unit & sensors Front side

Speaker

LCD

Antenna Key button

SOS button

Microphone

Press for 2 seconds in emergencies

Back side

AC adapter jack

Telephone line port

Extension port

(AC230/50Hz,

(Optional)

DC9V, 500mA) Backup battery

Wired siren jack

Siren switch

Power switch 16

Remote Controller

When you register the main unit, please press all 3 buttons together.

Alarm button Off button

Press to enter

Press to enter ‘Wait mode’.

‘Alarm mode’.

SOS button

LED

Press in the event of an emergency situation.

How to replace battery Open the cover using a screwdriver and replace the battery when necessary with: CR2032 3V x 1 ea.

Observe (+) and (-) ends.

If the battery is low: * LED light appears dim or doesn’t work. * Battery life: 1 year * The range of operations and functions may be shortened. * Replace the battery when necessary.

17

Door Sensor Within 1Cm(0.4inch)

LED Magnetic

Please press this part for 2 seconds when you attach the main unit.

How to replace batteries Open the cover as below and replace the batteries when necessary with: AAA-1.5V x 2 ea.

Observe (+) and (-) ends.

If the battery is low: * Under wait mode, main unit alerts with the following voice messages: - “Door sensor has been activated.”

- “Battery is low.”

* Battery lasts approx. one and a half years. * Change the battery when necessary.

18

Motion Detector

Open the lid as shown above to replace battery or attach motion sensor.

Do not touch the sensor area.

Use a soft fabric to clean this part when dirty.

Power Switch Turn on the power switch when you attach motion

Open the lid and replace all

detector to the main unit.

batteries when necessary AA-1.5 x4a (Observe (+) and (-)ends.)

Pull down the string to replace with new batteries.

19

If the battery is low: * Under wait mode, main unit alerts with the following voice messages: - “Motion Detector has been activated.”

- “Battery is low.” * If Motion detector detects movement, it makes a ‘beep’ sound.

* Battery lasts approx. 10 months. * Change the battery when necessary.

Installation & Setup of the main unit Installation of the main unit.

Telephone line connection with the main unit.

Configure the connection as shown below when using a single phone line with Savercall-3000

A/C adapter connection (AC230V 50Hz, DC9V/500mA)

20

How to wall mount the Motion detector Mount the Motion Detector using the included mount and screws. * Please note - Follow the diagram and details listed below, otherwise detection range may be shortened.

Place the Motion Detector on a wall using bracket/screws or attach at the desired location.

Tilt the Motion Detector slightly downward, approximately at 14° angle.

The detection range covers about a 90° angle horizontally.

The detection distance is approximately 33-ft.

Mounting on the ceiling If the interior is too wide for the sensor’s coverage, You may attach it to the ceiling.

Refer to the detection range of the sensor and position it to directly face the target.

Detection Range 14° Ceiling 32° Wall

Horizontality 90°

Wall(Top view)

21

How to install Door Sensor •

You will need one Contact with Transceiver, one plain Contact, Shims (for spacers if necessary), and the included screws or double-sided tape for each Door Sensor setup

•

The space between within 1Cm(0.4inch)

•

Use the included shims if necessary to match the height of the two contacts

•

Stretch out cord for best reception

•

Make sure that LED lights up when door/window is opened

•

If LED does not light up, change the battery

When you install the door sensor on a wooden door.

Use the included screws for installation.

Magnetic Spacer

When you install the door sensor on a glass door.

Use double-sided tape for installation.

22

Initial setup * For normal operation in case of emergency or intrusion, set the main unit before use.

Key Button

To enter “Setting Mode” for the first time, follow the steps below: 1) Plug in A/C Adaptor to the main unit.

2) Turn on the power switch of the main unit at the back side by pressing WAIT/SET key.

3) You will hear “ding”, then Savercall-3000 enters setting mode.

4) Green LED will blink in setting mode.

0=Exit 1=ID 2=Sensor memory 3=Recording 4=Delaying alarm L C D 5=Phone number 6=Time 7=Others Select >> VOICE This is setting mode. Please select the function number. * If you cannot see the above menu, start from Step 2) after turning the system off Note: Please note that ‘1=ID’, ‘2=Sensor memory’, ‘3=Recording’, ‘5=Phone number’ are essential menu functions. User must set up for normal operation of this system.

23

Menu summary

Main menu 0

To finish set mode

1

To input password

2

Wait mode

To register remote controller & sensors

3

To record voice guide

4

To set alarm delay time

5

To input telephone number

6

To set current time/day

7

To set additional menu Additional menu 0

To finish additional menu

1

To set alarm delay time sound

2

To set remote controller sound

3

To set chime bell sound

4

To set ringer sound

5

To set CID function

6

To set morning call

7

To set automatic controller mode

8

To set siren activation time

9

To set rings to answer

65

To set guide volume

24

Main Menu(“1” To set password [1=ID] Create & set a 4-digit Password (=ID Number) that will be needed for programming, editing or accessing the system through the keypad on the Main unit or Remotely by Telephone.

KEY 1 LCD

ID =

VOICE Please input password. Please press set key after finishing.

Example: If you input password “1 2 3 4” K E Y 1 + 2 + 3 + 4 + WAIT/SET LCD

ID =1234

VOICE 1,2,3,4 The data is entered. * Please note that password should be composed of 4 numeric digits. If you input the wrong number, press ‘SOS’ button to return to the initial setting menu.

To confirm the password you inputted: LCD

ID [1234] 1=ok 2=change

VOICE Password 1 2 3 4, Press no.1 for selection, press no.2 for change.

Press 1key for selection or press 2key to change.

25

“2” sensor registration. [2=sensor memory] KEY 2 LCD

Activate Sensor

VOICE Please activate sensor and remote controller. * All sensors & remote controllers must be registered to be used. * You can assign sensor number from 1 to 30 and register sensors up to 60 pcs. ①To register sensors: Remote Controller Press three buttons together to register remote controller

When you register “Remote controller” (Press “ALARM”, “OFF”,”SOS” together) LCD VOICE

Remote controller Sensor No= Remote controller, please input number. Press set key after finishing.

26

* When registering, user can assign a “Sensor number” to each sensor, so that the user knows which sensor has been activated in case of intrusion or fire. “Sensor number” is very useful if you use many sensors.

If you want to assign “remote controller” as no.1 (You can register sensor number from no.1 to no. 30): K E Y 1 + WAIT/SET LCD

Remote Sensor No=1

VOICE 1, the data is entered. * User can assign “Sensor number” from 1 to 30. If you input the wrong number, press “SOS” button to return to the initial setting menu.

If you input wrong key, you will hear the below voice message: VOICE Please input again.

To confirm sensor you registered, press the three buttons together one more time. (Remote controller: Press “ALARM”, “OFF”,”SOS” together) LCD

Activate Sensor

VOICE Please activate sensor and remote controller.

If you want to assign “remote controller” as sensor no.1: LCD VOICE

Remote cont 01 1=ok 2=change Remote controller, No.1, Press no.1 for selection, press no.2 for change.

If you want to select, press 1key. If you want to change, press 2key.

27

If you select change (no.2), you will see the below message: LCD

VOICE

Remote control Sensor No= Remote controller, please input number. Please press set key after finishing.

* It is not possible to delete the registered sensors one by one. It is only possible to change the sensor number. If you want to delete the registered sensors, initialize Savercall-3000.

Door sensor

Press this “Test button” for 2 seconds for registration.

When you register “Door sensor”, press “Test button” for 2 seconds.

LCD

VOICE

Door sensor Sensor No= Door sensor, please input sensor number. Please press set key after finishing.

If you want to assign “Door sensor” as no.2 (You can assign sensor number from no.1 to no. 30)

28

K E Y 1 + WAIT/SET LCD

Door sensor Sensor No=1

VOICE 1, the data is entered. * Please note that sensor no.1 and no.2-30 have the following differences: - If user assigns sensor number as no.1, when sensor is activated, main unit will call automatically with ringing siren after alarm delay time in “alarm mode”.

- If user assigns sensor as no.2-30, when sensor is activated, main unit will call automatically with ringing siren immediately in “alarm mode”.

To confirm sensor you assigned:

LCD

Activate Sensor

VOICE Please activate sensor and remote controller.

If you want to assign “Door sensor” as sensor no.2 LCD

Door sensor 02 1=ok 2=change

VOICE Door sensor, No.2, Press no.1 for selection, press no.2 for change.

If you select change (no.2), you will see the below message: LCD

Door sensor Sensor No=

VOICE Please input sensor number. Please press set key after finishing.

29

Motion detector

Please turn on the Power switch.

You will see LED blinking

When you register “Motion detector”, turn on switch.

LCD

VOICE

Motion sensor Sensor No= “Motion detector”, please input sensor number. Please press set key after finishing.

If you want to assign “Motion detector” as no.3 (You can register sensor from no.1 to no. 30.)

K E Y 1 + WAIT/SET LCD

Motion sensor Sensor No=1

VOICE 1, the data is entered. * Please note that sensor no.1 and no.2-30 have the following differences: - If user assigns sensor as no.1, when sensor is activated, main unit will call automatically with ringing siren after alarm delay time in “alarm mode”.

- If user assigns sensor as no.2-30, when sensor is activated, main unit will call automatically with ringing siren immediately in “alarm mode”. *If the motion detector is set at the ‘main gate’, assign the sensor number to no.1.

30

To confirm sensor you assigned, turn off power and then turn it on again.

LCD

Activate Sensor

VOICE Please activate sensor and remote controller.

If you want to assign “Motion detector” as sensor no.3 LCD

Motion_sens 01 1=ok 2=change

VOICE Motion detector, No.3, Press no.1 for selection, press no.2 for change.

If you select change (no.2), you will see the below message: LCD

VOICE

Motion sensor Sensor No= Motion detector, please input number. Please press set key after finishing.

“3” Record user message [3=recording] To record alarm notification message [3=Record] Speak slowly & clearly while recording (Max. 30 seconds) K E Y 3 + [Message and address record] + WAIT/SET LCD

Record address Press any key

VOICE Please leave your message after the beep and then press set key.

31

Then user message will be revived as follows: LCD

Record address Confirm address

VOICE To select user messages: LCD

Record address 1=ok 2=change

VOICE Press no.1 for selection, press no.2 for change.

Press no.1 key for selection, press no.2 key to change

“4” To input alarm delay time [4=Delaying alarm] To input alarm delay time [4=Delay alarm] In case of entering ‘alarm mode’ or in the event of a situation, activation of Savercall-3000 will be delayed according to the alarm delay time.

KEY 4 Delay alarm [15] LCD 1=ok 2=change Alarm delay time,15 seconds, press no.1 for selection, press no.2 VOICE for change.

The default time is 15 seconds. You can set from 1 sec. to 99 sec.

Press 1key for selection, press 2key to change.

When you select “change” of alarm delay time: LCD

VOICE

Delay alarm [15] = Please input the alarm delay time. Please press set key after finishing.

32

If you want to set “alarm delay time” as 30 seconds: K E Y 3 + 0 + WAIT/SET LCD

Delay time =30

VOICE 3, 0, the data is entered.

From the next step, registration will be the same as the above instructions. *If you input the wrong number, press ‘SOS’ button to return to the setting menu. *Alarm delay time will always be counted when you change the mode from ‘Wait mode’ to ‘Alarm away mode’ or ‘Alarm home mode.’ *In case of the below situation, ‘Alarm delay time’ will be counted if Savercall-3000 detects sensor’s activation under ‘Alarm mode’: If you assign ‘Door sensor’ or ‘Motion detector’s number as No.1. *In case of the below situation, ‘Alarm delay time’ will not be counted if it detects sensor’s activation under ‘Alarm mode’: If you assign ‘Door sensor’ or ‘Motion detector’s number between No.2 and No.30 If you press the ‘SOS’ button on main unit or remote controller If “Fire sensor” has been activated (“Fire sensor” will be activated in “Wait mode” and “Alarm away mode”, “Alarm home mode”.)

33

“5” To input telephone number To input telephone number [5=Phone number] You can input maximum 5 telephone numbers, and the numbers should be within 20 digits.

KEY 5 LCD

1 Phone number =

VOICE The first telephone no. Please press set key after finishing.

Ex. If you want to input the first telephone no. “02-861-5333”.

K E Y 0 + 2 + 8 + 6 + 1 + 5 + 3 + 3 + 3 + WAIT/SET LCD

1 Phone number =028615333

VOICE 0, 2, 8, 6, 1, 5, 3, 3, 3. The data is entered. *If you input the wrong number, press ‘SOS’ button to return to the setting menu.

To confirm the first telephone number you input: LCD

VOICE

☎1=028615333 1=ok 2=change The first telephone number 0,2,8,6,1,5,3,3,3. Press no.1 for selection, press no.2 for change.

34

To register from the second to the fifth telephone numbers: K E Y (Input user telephone number) + WAIT/SET LCD

Phone number [2 ~ 5] =(Input user telephone number)

VOICE (Input user telephone number), the data is entered.

Same as above instruction. *If you want to stop inputting telephone numbers or have finished, press WAIT/SET key. It will return to the initial setting menu. *To stop inputting telephone numbers and return to the initial setting menu while you are setting, press SOS button.

To register extension number: (Example: to register 02-861-5333 as extension code 9) KEY LCD

9 + ARM-AWAY + 0 + 2 + 8 + 6 + 1 + 5 + 3 + 3 + 3 + WAIT/SET (1 ~ 5) Phone number =9W028615333

VOICE 9, WAIT, 0, 2, 8, 6, 1, 5, 3, 3, 3, the data is entered. *ARM-AWAY button waits for about 3 seconds when auto dialer makes a phone call.

To register telephone number of pulse system (example: 012-345-6789) KEY LCD

ARM-Home + 0 + 1 + 2 + 3 + 4 + 5 + 6 + 7 + 8 + 9 + WAIT/SET (1 ~ 5) Phone number =P0123456789

VOICE PULSE, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, the data is entered. * To change Pulse/Tone, press “ARM-HOME� KEY. 35

※ To delete the programmed phone number: -If you programmed 3 phone numbers and would like to delete the third phone number: -Choose number 5 [5=Phone number] in initial setting menu.

-If the first phone number is “8615331”, the second phone number is “8615332”, the third phone number “8615333”, etc., and the LCD will display as below: LCD

VOICE

☎1=028615331 1=ok 2=change The first telephone number 0,2,8,6,1,5,3,3,1, Press no.1 for selection, press no.2 for change.

-Press 1, and then move on to the second phone number.

LCD

VOICE

☎2=028615332 1=ok 2=change The first telephone number 0,2,8,6,1,5,3,3,2, Press no.1 for selection, press no.2 for change.

-Press 1, and then move on to the third phone number.

LCD

VOICE

☎3=028615333 1=ok 2=change The first telephone number 0,2,8,6,1,5,3,3,3, Press no.1 for selection, press no.2 for change.

36

-Press 2, and Savercall-3000 will enter the menu for changing the telephone number as below: LCD

3 Phone number =

VOICE Please press set key after finishing.

-Here, press WAIT/SET key to delete the third phone number. If you delete the third phone number, the fourth & the fifth phone numbers will also be deleted. * The registered phone numbers can be changed, but it is not possible to delete the phone number one by one.

-If you registered 5 phone numbers, you cannot delete the third phone number alone. If you delete the third phone number, the fourth & the fifth phone numbers will also be deleted.

“6” To set the current time / day To set the current time [6=Time] KEY 6 LCD

Time [HH:MM]?

12:00 AM

VOICE Please input the current time. Please press set key after finishing. ※ First input ‘hours’, then input ‘minutes’.

37

Example - The current time is 8:12 AM: K E Y 0 + 8 +1 + 2 + LCD

WAIT/SET

Time [HH:MM]?

08:12AM

VOICE 0, 8, 1, 2 After inputting the time, LCD displays date setting menu. * “Time” should be composed of 2 digit numeric numbers, and “AM/PM” will be selected automatically.

Example –10 AM: 10 (1 + 0), 10 PM: 22 (2 + 2) *If you want to change “AM/PM” manually, press any number before pressing WAIT/SET key.

Example – 1 + 0 + 2 + 2 + Any number To set the current day [6=Day] LCD

Day [YY/MM/DD]?

2004/01/01

VOICE Please input a date. Please press set key after finishing.

Example-The current day is 2004.02.12 KEY LCD VOICE

0 + 4 + 0 + 2+ 1 + 2 + WAIT/SET Day [YY/MM/DD]?

2004/02/12 0,4,0,2,1,2

38

“0” To finish Setting mode [0=EXIT] KEY

0 0=Exit 1=ID 2=Sensor memory 3=Recording 4=Delaying alarm

L C D 5=Phone number 6=Time 7=Others Select >> VOICE The setting is accomplished.

Then you will enter “wait mode”.

LCD

WAIT mode 2/12

8:12.AM

VOICE This is wait mode. *Please note that “1=ID”, “2=Sensor memory”, “3=Recording”, “5=Phone number” are essential menus.

Ex) if you do not set “password” & “record”, you will hear: VOICE Password, Recording, not set yet

“7” To set up additional menu To set up additional menu [7=Others] KEY

7 Others: 0=Exit 1=Delay tone 2=Remote sound 3=Chime bell

L C D 4=Ringer sound…….

Select >> VOICE Please select the function number.

39

<Additional Menu> “1” To set up delay tone sound In this menu, you can select whether you use the delay tone sound or when “Door sensor no.1” or “Motion sensor no.1” has been activated in “Alarm away mode”, “Alarm home mode”.

If you want to use the delay tone sound [0=Exit, 1=Delay tone, 2=Remote sound, 3=Chime bell, 4=Ringer sound, 5=CID use…….]

KEY 1 LCD

Delay tone [1] 1=select 2=not

VOICE If you want alarm delay time sound, press no.1, otherwise, press no.2 * “Delay tone sound” will last according to the alarm delay time which was programmed in set up menu 4 [4=Delaying alarm] * Delay tone sound is always played whenever “Alarm Home mode”, “Alarm Away mode” is entered ,regardless of above setting.

“2” To set up remote controller sound To set up remote controller sound: KEY 2 LCD

VOICE

Remote sound [1] 1=select 2=not If you want remote controller sound, press no.1, otherwise, press no.2

If you want to use this function, press no.1, otherwise, press no.2 40

* If the siren switch of main unit is off, remote controller will not sound, regardless of above setting.

“3” To set up chime bell sound To set up chime bell sound (*Default is [2].): KEY 3 LCD

Chime bell [2] 1=select 2=not

VOICE If you want chime bell sound, press no.1, otherwise, press no.2 * This function works only under “Wait Mode”.

“4” To set up ringer sound To set up telephone ringer sound when main unit receives a call (*Default is [2].): KEY 4 LCD

Ringer sound [2] 1=select 2=not

VOICE If you want phone ringer sound, press no.1, otherwise, press no.2

41

“5” To set up CID function This function is used to see the phone number of caller. “CID” function is only possible if you apply for this service to phone service provider.

To set up CID function [5=CID function] (*Default is [2].)

KEY 5 LCD

CID use? [2] 1=select 2=not

VOICE If you want CID function, press no.1, otherwise, press no.2 * If the phone network is not to allow CID function, choose 2.

If you choose CID function, input “local area code”.

LCD

Local no [

]

=

VOICE Please input area code. Please press set key after finishing.

If the area is “Seoul”, input [02].

K E Y 0 + 2 + WAIT/SET LCD

Local no [

]

=02

VOICE 0,2, the data is entered. ※ It is possible to input up to 4 digits for “Area code”.

42

To register extension number K E Y 9 + WAIT/SET LCD

Out line [ ] =9

VOICE 9, the data is entered. ※ It is possible to input up to 2 digits for “Extension code”.

If the phone line is residential, press WAIT/SET key K E Y WAIT/SET LCD

Out line [ ] =

“6” To set up morning call To set up morning call [6=Morning call] KEY 6 LCD

VOICE

Morning call [2] 1=select 2=not If you want wake up call function, press no.1, otherwise, press no.2

Ex) If you set up (A.M) 6:30, K E Y 0 + 6 + 3 + 0 + WAIT/SET LCD

Morning call 06:30 AM

VOICE 0,6,3,0 43

* Time should be composed of 2 digit numeric numbers from 0 to 9, and “AM/PM” will be automatically selected. If you want to change “AM/PM” manually, press any number before pressing WAIT/SET key.

Example – 0+ 6 + 3 + 0 + Any number

“7” To set up automatic controller mode * If you select auto mode, Savercall-3000 will be active at programmed time and inactive at programmed time, repeatedly.

To set up auto mode [7=Auto mode] KEY 7 LCD

VOICE

Auto mode? [2] 1=select 2=not If you want automatic controller mode, press no.1, otherwise, press no.2

If you selected ‘Auto mode’, then select ‘Alarm mode’ (‘Alarm home mode’ or ‘Alarm away mode’.)

LCD

alarm select [2] 1=Home 2=Away

VOICE Please select mode

44

If you selected ‘Alarm Away mode’, then select the time to enter the Alarm mode.

LCD

auto AWAY time?

09:00 PM

VOICE Please set time. Please press set key after finishing.

To set SAVERCALL-3000 to enter “Alarm Away mode” automatically at 09:30 AM K E Y 0 + 9 + 3 + 0 + WAIT/SET LCD

auto AWAY time ?

09:30 AM

VOICE 0, 9, 3, 0 * Time should be composed of 2 digit numeric numbers from 0 to 9, and “AM/PM” will be automatically selected. If you want to change “AM/PM” manually, press any number before pressing WAIT/SET key.

Example – 0 + 9 + 3 + 0 + Any number After setting the Alarm mode and the time to enter the alarm mode automatically, select the time to enter wait mode.

LCD

auto WAIT time ?

09:00 PM

VOICE Please set time. Please press set key after finishing.

45

To set SAVERCALL3000 to enter “Wait mode” automatically at 07:30 PM K E Y 1 + 9 + 3 + 0 + WAIT/SET LCD

auto AWAY time ?

07:30 PM

VOICE 1, 9, 3, 0

“8” To set up siren activation time To set up siren activation time [8=Siren time] KEY 8 LCD

VOICE

Siren time [30] = Please input siren activation time. Please press set key after finishing.

* Default setting is 30 seconds, and it can be selected from 1 to 99 seconds. * If you inputted the wrong time, press “SOS” button to return to the initial setting menu.

“9” To set up ringer time * This function is to set up the number of phone rings before the main unit responds when you use the remote control outside via the telephone. For example, if you input 12 for ringer time, Savercall-3000 will respond to a phone call after the ringer sounds 12 times, and then it allows you to remote control Savercall-3000 on the phone.

46

To set up ringer time [9=Ringer time] (*Default setting is 12 times, and you can set it from 1 to 99 times.)

KEY 9 LCD

Ringer time [12] =

VOICE Please input rings to answer. Please press set key after finishing. * If you inputted the wrong number, press “SOS” button to return to the initial setting menu.

To set up guide volume To set up guide volume [▼] [▲] K E Y [▼] or [▲] LCD

VOICE

Guide volume ▼=down ▲=up Please adjust the volume level by volume keys. Please press set key after finishing.

47

“0” To finish additional menu To finish additional menu [0=Exit] To finish additional menu and return to the main menu: KEY 0 0=Exit 1=ID 2=Sensor memory 3=Recording 4=Delaying alarm L C D 5=Phone number 6=Time 7=Others select >> VOICE Please select the function number. ※ Under ‘Additional menu’, it is not possible to finish ‘setting mode’ directly.

To finish setting mode, exit ‘additional menu’ and enter ‘main menu’. Then, press 0 to finish ‘setting mode’ and enter ‘wait mode’.

To finish setting mode To finish setting mode * In the main menu -> 0 = Exit (To finish setting mode and go to wait mode) * In the additional menu -> 0 = Exit (To finish additional menu and go to main menu) -> 0 = Exit (To finish set mode and go to wait mode) KEY 0 0=Exit 1=ID 2=Sensor memory 3=Recording 4=Delaying alarm L C D 5=Phone number 6=Time 7=Others select >> VOICE The setting is accomplished.

Then you will hear: VOICE This is wait mode 48

Examples of How Savercall-3000 Works Burglary Example When you are out, set to “Alarm away mode”. All sensors will be activated.

When you are at home, set to “Alarm home mode”. All sensors will be activated except motion detector.

If an intruder enters your home, Savercall-3000 will be activated as below: ①An intruder triggers a Door Sensor or Motion Detector and activates Savercall-3000

②Savercall-3000 immediately dials the first programmed phone

Who are you?

number.

③You can monitor the situation

Who are you?

and speak directly to the intruder.

Time chart Emergency call

Detect the situation

To start alarm mode

e t a v i t c a r o s n e S

To set alarm mode

Savercall-3000 immediately dials the first Programmed phone number for 30 seconds.

If there is no touch-tone response, Savercall-3000 will continue to call each number down the list until a user responds, or until the last programmed phone number has been called. The main unit will repeat this process three times.

me chart

1~99sec

Delay time 0~99sec

1st phone number

Siren activation 49

2nd

3rd

4th

Emergency Call Example If you press ‘SOS’ button on remote controller or main unit, Savercall-3000 will be operated as below regardless of current mode:

②Savercall-3000 immediately

①The user should press and

dials the first programmed phone

hold the red SOS button on the

number with ringing Siren

Remote controller or main unit.

③You can monitor the situation and speak directly to a caller.

‘SOS’ button of main unit or remote controller (Time chart) Start making Emergency call ‘SOS’ button of remote controller / main unit

No Delay Time 1st phone number

Siren sounds

50

2nd

3rd

4th

[USER GUIDE] 1. To enter setting mode ① When you are in “Wait mode”. ⓐ Press WAIT/SET + 4-digit password (Ex: password is “1 2 3 4”) K E Y WAIT/SET LCD

+1+2+3+4

ID =****

VOICE This is setting mode. ② When you are in “alarm (alarm away & alarm home) mode”. ⓐ If you press WAIT/SET + 4-digit password, you will enter “wait mode”, ⓑ Then follow ① in order to enter “setting mode”. ※ It is possible to enter the “setting mode” only in “wait mode”.

2. To enter alarm away mode ※ Finish “setting mode” and enter “wait mode”. It is not possible to apply mode changes in “setting mode”.

By Remote controller – Press the Alarm button

By Keypad on the main unit – ARM-AWAY + Password Remotely by Telephone – Password + 5 Details: •

LED on main unit lights up RED

•

Savercall-3000 starts countdown before activation according to “Alarm delay time”.

•

If you want to cancel activation during countdown, you can do this with remote controller or by pressing “#” button of main unit.

51

•

If telephone line is disconnected, you will hear voice guide, “Telephone line is disconnected.” 5 times, and then you will see a blinking LED light (Yellow/Green/Red).

* “Alarm” button of remote controller can be used to change mode to “alarm home mode” or “alarm away mode”.

LCD

ALARM AWAY 9/12

8:12 AM

VOICE This is alarm-away mode

3. To enter Alarm home mode ※ If you select ‘alarm home mode’, all sensors will be activated except motion detector Therefore, ‘alarm home mode’ is a very useful function if somebody or a pet is in your house.

By Remote controller – Press the Alarm button in Alarm away mode.

By Keypad on the main unit –ARM-HOME + Password Remotely by Telephone – Password + 6 Details: •

LED on main unit lights up ORANGE

•

Savercall-3000 starts countdown before activation according to “Alarm delay time”.

LCD

ALARM HOME 9/12

8:12 AM

VOICE This is alarm-home mode

52

4. To return to Wait mode ※ ‘Wait mode’ is the initial mode, and it is possible to enter any mode from “wait mode”. In “wait mode”, you can use Savercall-3000 as a telephone through the speaker, and can also be used as a chime bell.

By Remote Controller – Press the OFF button

By Keypad on the main unit –WAIT/SET + Password Remotely by Telephone – Password + 4 Details: • LCD

LED on main unit lights up GREEN WAIT mode 9/12

8:12 AM

VOICE This is wait mode.

5. To make an emergency call

By Remote controller – Press the red SOS button from any mode

By Keypad on the main unit– Press the red SOS button for 2 seconds from any mode.

Details: •

LED on main unit lights up Yellow/Orange/Green, blinking

•

Loud Siren immediately sounds

•

Savercall-3000 automatically dials the preset phone number, plays the Alarm Notification message and voice-prompts for response.

To stop emergency call: Press OFF button of remote controller to stop emergency call

53

※ It is possible to stop emergency call with the main unit. To stop emergency call, press WAIT/SET + PASSWORD.

6. Receiving & Responding To an Alarm Notification Call ① In the event of a situation such as intrusion or fire, Savercall-3000 will automatically make phone calls to the preset phone numbers, up to 5 places. ② Auto dialer of Savercall-3000 will be activated and phone calls made automatically in case of detecting sensors’ activation as below: Mode

Fire sensor

SOS from remote

Door

Motion

controller or main unit

sensor

detector

Wait mode

O

O

x

x

Alarm home mode

O

O

O

x

Alarm away mode

O

O

O

O

③ How auto dialer of Savercall-3000 works: ⓐ In the event of a situation, Siren will make an ear-piercing sound as the user sets, and then Savercall-3000 will make phone calls to the preset phone numbers. ⓑ Savercall-3000 will attempt to call for 30 seconds. If the call is responded to, the user will hear a voice guide message such as, “Emergency call has been activated. Press No. 0”. If you press “0” at this time, the voice guide will be played in the table below: Ex) If “Motion detector no.1” has been activated in alarm away mode: ① Notify the reason of the alarm notification call (Activated by ‘Motion detector no.1’) 54

② Notify the current mode status (The current status is ‘alarm away mode’) ③ Revive the prerecorded user’s voice message (“This is Hyun Joung System in Kurodong 197-7, Emergency situation has been activated.”) ④ Guide the menus which can be controlled by the user (Refer to the below chart for ‘Voice Guided Menu for Alarm Notification Call’.) ⑤ Wait for the user’s choice for 5 seconds. ⓒ If user doesn’t press any button, Savercall-3000 will hang up the phone and attempt to call the next phone number. ⓓ If a phone number is busy, or if there is no touch-tone response (DTMF signal) from a receiver, SAVERCALL-3000 will attempt to call the next phone number, and the system will run this process three times.

Voice Guided Menu for Alarm Notification Call User Function Converse via speakerphone

Voice Guide

Press

“To speak, press no. 1.”

1

“To wiretap, press no. 2.”

2

Want to start Siren alarm

“To start Siren, press no. 3.”

3

Enter wait mode

“To enter wait mode, press no. 4.”

4

“To stop all dialing, press no. 8.”

8

Listen only, mute speakerphone at the alarmed zone

Have main unit stop dialing the programmed phone numbers To hang up the phone and dial

“To hang up the phone and dial the

the next phone number

next phone number, press no.9.”

Hear Voice guidance again

“To hear repeatedly, press no. 0.”

55

9 0

1 To speak via speakerphone: •

Press no. 1

•

User can talk to the person who is on-site and warn the intruder to leave the place immediately.

•

After 30 seconds, this menu will stop automatically and Savercall3000 will return to the introduction menu.

•

If the user wants to end this menu and move to another menu, press a menu number.

2 To wiretap •

Press no. 2

•

User will hear the sounds on-site and will know what is happening inside.

After 30 seconds, this menu will stop automatically and Savercall3000 will return to the introduction menu.

•

If the user wants to end this menu and move to another menu, press a menu number.

3 To activate siren •

Press no. 3

•

User can activate siren of their choice. At this time, siren will be activated even if the siren switch on the main unit is off.

•

Siren will be activated according to the “siren activation time” as set by the user. If the user enters the no.1 or no.2 menu, siren activation will stop automatically.

•

If you want to stop the siren activation, press no.1 or no.2.

56

4 To enter “Wait mode” •

Press no. 4

•

It is used to change the mode of the main unit to “Wait mode. For security, user should input the “Password”.

•

In this case, the mode of the main unit will be changed to “Wait mode”. It doesn’t mean that the “Alarm situation” will be deactivated or that “Auto dialer” will cease to function.

8 To stop dialing the programmed phone numbers •

Press no. 8

•

This is used to stop all dialing and to hang up the current phone connection.

9 To hang up the phone connection and dial the next phone number •

Press no. 9

•

This is used to hang up the phone and dial the next phone number.

•

If you do not select no. 9 and hang up the phone, Savercall-3000 will dial the next phone number. In this case, phone connection could be delayed.

0 To hear voice guidance again •

Press no. 0

•

After playing “Reason for Alarm notification call” & “Current status” & “Recorded user’s voice message”, menu will be guided from the start.

•

“Reason for Alarm notification call” will let you know which sensor has been activated and the sensor number, so that you can know the 57

reason (for example, door open, motion detect, fire, etc.) and the location referring to the sensor number. Also, you can check which sensor has been activated sequentially by pressing 0 even during the “Alarm notification call’ dialing and when other sensors have been activated. Therefore, you will know the intruder’s route.

•

“Reason for Alarm notification call”: Door sensor, Motion detector, fire sensor, SOS button of main unit. SOS button of remote controller.

•

“Reason for Alarm notification call” will save up to 5 sequentially, and the same reason will not be saved repeatedly.

7. To remote control SAVERCALL-3000 via Telephone ① You can remote control Savercall-3000 via telephone even if you are outside.

You can perform mode change and listen in & talk to the person who is inside. ② To remote control via telephone: Make a phone call to SAVERCALL-3000.

After you hear “ringer times” which was set, you’ll enter Remote control mode.

When Savercall-3000 answers, you will hear: “ding, ding, ding”, then you will also hear “Please input password.”

Enter 4 digit Password ※ Password should be 4-digit numeric numbers, and Savercall3000 will hang up the phone if you input the wrong password three times.

If password is correct, you will hear voice guide as follows: Ex) If Savercall-3000 is remote controlled via telephone in ‘alarm home mode’: 58

a) Voice guide will inform you of the history (Refer to the below information) b) Voice guide will inform you of the current mode. (This is ‘alarm home mode’.) c) Voice guide will inform you of the menu for remote control mode. d) Savercall-3000 will wait 5seconds for user’s order.

If you do not press any button within 5 seconds, Savercall-3000 will hang up the phone.

Voice Guided Menu for Remote Control Mode User Function Converse via speakerphone Listen only, mute speakerphone at the alarmed zone Want to start Siren alarm To enter wait mode To enter alarm away mode To enter alarm home mode To finish remote control mode Hear Voice guidance again

Voice Guide

Press

“To speak, press no. 1.”

1

“To wiretap, press no. 2.”

2

“To start Siren, press no. 3.”

3

“To enter wait mode, press no.

4.”

“To enter alarm away mode, press no. 5.”

“To enter alarm home mode, press no. 6.”

“To finish remote control mode and hang up the phone.”

“To hear repeatedly press no. 0.”

59

4 5 6 9 0

● Menu 1, 2, 3, 4, 0 is the same function as alarm notification call, and 5,6,9 is only possible in remote control mode.

Enter “Alarm-away” mode (no. 5) This is used to change the mode of the main unit to “Alarm-away mode”.

Enter “Alarm-home” mode (no. 6) This is used to change the mode of the main unit to “Alarm-home mode”.

Finish remote control mode (no. 9) This is used to finish remote control mode and hang up the phone.

8. How to use telephone with the main unit Press [☎]Key in the main unit K E Y [☎] LCD

Phone number = When you hear a dial tone, press numeric buttons to make a phone call.

If you want to increase volume, press [▲] If you want to decrease volume, press [▼] To receive a call, press [☎] Key. To hang up the phone, press [☎] key.

60

※ LCD display while talking over the phone KEY 0+2+8+6+1+5+3+3+3 LCD

4:54P

00.07

=028615333_

4:54P: Current time, 00.07: elapsed time To redial, press [0Redial] key. (The last called phone number will be dialed.)

K E Y [0Redial] LCD

Phone number =028615333_

9. How to use “CID” function Caller information (Telephone number, Date, Time) will be displayed on LCD. Information can be saved up to 20, and can be searched. During searching, you can make a phone call using [0Redial] button. (“CID” function can be used if you apply for service to the phone service provider.)

To use “CID” function, [Set Mode]-[Additional function 7]-[CID use 5]-“1 use” should be selected.

If you choose “1 use”, LCD will be displayed as below under “Wait mode”: LCD

WAIT mode c00 9/12 8:12 AM

※ “c00”: number of information- 0 (ex. “c03”: New information -3)

61

If you choose “2 not use”, LCD will be displayed as below under “Wait mode”: LCD

WAIT mode 9/12 8:12 AM

If there was a phone call from outside: Ex) Oct. 15th, 11:28 AM, 02-861-5333…

LCD

N—10-15 11:28A 028615333

If there was one phone call: LCD

WAIT mode c01 9/12 8:12 AM

To search Caller ID, press [*CID] button on the main unit.

K E Y [*CID] LCD

N—10-15 11:28A 028615333

Search caller ID using [▼], [▲] buttons.

K E Y Press [▼], [▲] button.

LCD

N01 10-15 11:28A 028615333

※ N—: Displays caller ID when receiving a phone call from outside N01: Displays new caller ID during searching of caller ID C01: Displays previous caller ID during searching of caller ID

62

To make a phone call using “CID” information: K E Y Press [*CID] button LCD

N01 10-15 11:28AM 028615333

Select the phone number using [▼], [▲] buttons, and press [0Redial] button.

To delete caller ID: K E Y [*CID] LCD

C01 10-15 11:28A 028615333

Select phone number using [▼], [▲] buttons, and press [#DEL] button.

If there is no caller ID information: LCD

WAIT mode c00 CID no data!!

※ In the below situation, caller ID will not be displayed. ① In case of caller making a phone call using a public phone: LCD

N—10-15 11:28A Pay phone

② In case of caller making a phone call from an area not serviced.

LCD

N—10-15 11:28A Out of area

63

③ In case of caller not sending information: LCD

N—10-15 11:28A Private blo-

10. How to use Siren with the main unit Savercall-3000 supports inner siren & external siren with wire & wireless siren (additional option). ※ To set ‘Wireless siren & repeater”, refer to the user manual for “Wireless siren & repeater”.

Basically, the external siren will sound. The inner siren will sound when the phone line is disconnected or when the user activates siren manually via telephone.

If you select “remote controller sound” in the additional menu, you will hear a whistle sound from the siren when you activate the remote controller. ⓐ Wait mode: Press “alarm” key → alarm away mode: 1 whistle sound ⓑ Alarm away mode: Press “alarm” key → alarm home mode: 2 whistle sounds ⓒ Alarm home mode: Press “alarm” key → alarm away mode: 1 whistle sound ⓓ All modes without set mode: Press “off” key → wait mode : 3 whistle sounds

64

11. LED status according to mode & status Mode

LED Status

Setting Mode

Blinking Green

Wait Mode

Green

Alarm-away Mode

Red

Alarm-home Mode

Orange

Emergency call

Blinking Yellow/Orange/Red

Savercall-3000 has 3 types of LED as follows: Green LED: Wait/set mode Orange LED: Alarm-home mode Red LED: Alarm away mode ※ If all LED lights (Yellow /Orange/Red) are blinking, it means that an event has been activated. In this case, check the LCD by pressing([▼]button)and press [#DEL] key after investigating the event.

12. In case of disconnection of telephone line

LCD

ALARM AWAY =Phone disconnect If the telephone line is disconnected when Savercall enters “Alarm-home mode” or “Alarm-away mode”, “Phone disconnection alarm” will be activated.

65

In case of phone line disconnection, you will hear the voice message, “The telephone is disconnected.” five times, and the Yellow/Orange/Green LED light will blink.

Also, LCD will notify the phone disconnection. You can check the situation using the [▼] button.

In case of phone line disconnection, it is not possible to make emergency calls.

If the phone line is recovered, Savercall-3000 will return to normal operation.

13. In case of power failure

LCD

ALARM AWAY Power failure!

VOICE The power supply is off In case of power failure, Savercall-3000 will work normally on the backup battery for 2 hours.

Yellow/Orange/Green LED lights will blink, and it will be notified by voice guide and LCD. Savercall-3000 will perform normal operation if power is recovered. ※ If power is recovered, Savercall-3000 will return to the previous activation mode.

Ex) If power fails in ‘Alarm away mode’, Savercall-3000 will return to “Alarm away mode” if power is recovered.

66

14. In case of low sensors battery When the sensors battery is low, the Yellow/Orange/Green LED lights will blink, and the LCD & Voice guide will notify low battery status (except remote controller.)

If the battery of the remote controller is low, it will not be notified.

Low battery alarm will sound upon sensor’s activation. Therefore, operate sensors 1~2 times a month to check battery status of sensors (especially if a sensor is installed in a remote area.)

In case of low sensors battery, automatic alarm notification calls will not be made to notify the battery status. However, automatic alarm notification calls will be made if sensor detects an event, even when the battery is low.

Ex) If the battery of motion detector number 1 is low: LCD

01] low battery Motion_sens01

VOICE Motion detector number 1, battery is low.

15. In case of changing the characteristics of sensors (Please use this function only in case of necessity.)

Each sensor has their own characteristic among ‘W’, ‘H’, ‘A’. ① If sensor has ‘W’ characteristic, it will operate under all modes (Wait/Alarm-home/Alarm-away mode). ② If sensor has ‘H’ characteristic, it will only operate under ‘Alarmhome mode’ and ‘Alarm-away mode’. ③ If sensor has ‘A’ characteristic, it will only operate under ‘Alarmaway mode’.

67

Each sensor is assigned to have a standard characteristic as below: Standard characteristic of each sensor Sensor SOS of remote controller Door Sensor Motion Detector Image Spider (Image Camera) Fire Sensor Window Sensor

Characteristic

Activation mode

A

Wait Alarm Alarm Alarm Alarm Alarm

A

Alarm Away

W H

W H

Other sensor W

Wait Alarm Alarm Alarm Alarm Wait Alarm Alarm

Home Away Home Away Away

Home Away Home Away

Emergency Main/Other Gate Main/Other Gate Main/Other Gate Emergency

Home Away

Above standard characteristics can be changed by pressing WAIT/SET, ARM-HOME, ARM-AWAY button of the main unit. To change the characteristic, refer to the below example: Ex) Change the characteristic of the motion detector To have the motion detector activate under â&#x20AC;&#x2DC;Alarm-homeâ&#x20AC;&#x2122; mode, Press WAIT/SET + PASSWORD+ 2.

K E Y Press 2 LCD

Activate Sensor

VOICE Please activate sensor and remote controller.

68

Please turn on the Power switch.

Turn on the power switch LCD

VOICE

Motion_sens 01 1=ok 2=change Motion detector no. 1, press no. 1 for selection, press no. 2 for change

K E Y Press 2 LCD

Motion_sensor Sensor No=

VOICE Motion Detector, please input number.

If you want to assign no. 1 as motion detector: K E Y Press ARM-HOME +1 + WAIT/SET LCD

Motion sensor Sensor No=H1

VOICE Alarm home mode, 1, the data is entered.

Turn power switch off, and then on again LCD

Activate Sensor

VOICE Please activate sensor and motion detector.

69

K E Y Press 1 LCD

Motion_ sens H01 1=OK 2=change

VOICE Motion detector, No.1, Press no.1 for selection, press no.2 for change.

Setup is complete. To finish and enter ‘Wait mode’, press 0.

16. How to check LCD & delete the record in the event of a situation

Ex) when the door sensor has been activated (if you assigned no.1 as door sensor) If an intruder breaks in through the door under ‘Alarm-away mode‘, Savercall-3000 will make ‘Alarm notification call’ and LCD will display as below: LCD

ALARM AWAY Door_ Sensor 01 If Savercall-3000 answers the phone, and the situation is rectified, LCD will display as below:

LCD

WAIT mode ACTIVE EVENT [▼]

VOICE Wait mode

70

To check the event: KEY LCD

Press [â&#x2013;¼] A01)3-25 10:46A Door_Sensor 01 Date/Time (AM) Activated Sensor (no.)

To delete the event:

KEY

Press [#DEL]

71

SAVERCALL-3000 Specifications ITEM

SPECIFICATIONS Main Unit 1EA, Motion Detector 1EA, Door sensor 1EA, Remote Controller 1EA,

Basic content

Wired Siren 1EA Back up Battery 1EA, Power Adapter 1EA, Telephone Line 2EA, Additional accessories,

Motion Detector Door Sensor

Range: 10m, Horizontal: 90°/ Vertical: 32° The space between the magnetic parts: within 1Cm(0.4inch)

Back up Battery

8.4V/300mAh

Weight (Main unit)

457g

Siren

110 +/- 5dB

Remote Controller

Range: over 20m(Open Space) Battery: CR2032

Main Unit Power

AC230V 50Hz(DC9V, 500mA)

SIZE(Main unit)

205mm(L) x 155mm(W) x 45mm(H)

Weight(Set)

2,350g

Frequency

FM 433.92 MHz

Main sensor

Door sensor, Motion detector, Remote Controller

Sub-detecting

Fire sensor, Repeater, Window Breakage Sensor,

sensor(Optional)

Electric power detector, Image Spider

No. of Extension sensors

Total 60 pcs.

Programming phone no.’s

5 numbers

Voice recording

30 seconds

Operating guidance

LCD display and Voice guidance

Operating temperature

0°C~ 50°C

Operating Humidity

20% ~ 90% 72

SAVERCALL-3000 (Optional sensors)

Motion Detector

Door Sensor

Fire Sensor

Wired Siren

Repeater & Siren

Remote Controller

Necklace Type

Image Spider

Repeater

Window Breakage Sensor

Electric power detector 73

Troubleshooting (Q & A) Q: What if I forget the password?

A: 1. Turn off main unit.

2. Turn on main unit by pressing WAIT/SET Key. Then you will enter initial setting mode after ‘Beep’.

Q: What if I don’t want to activate Motion Detector when someone is in?

A: 1. Enter alarm home mode.

2. The range of detection in Alarm Away mode is set from the setting.

3. Refer to Remote Control/Sensor Registration in the manual for the setting.

Q: Why can’t I receive phone calls?

A: 1. Check that the programmed telephone number is correct.

2. Check that the telephone line is securely connected to the “LINE” port.

3. Check that the phone (connected to the main unit) is placed correctly.

4. Check that the dialing method is set correctly with the proper type phone line.

Q: The motion detector is making false alarms.

A: 1. Change the sensor’s location and direction to avoid detecting pets.

2. Check if the sensor is located near an air current source (ex: near an air conditioner, nearby a window) or a sunny place.

Q: The remote controller doesn’t work.

A: 1. Check remote controller light by pressing button. If light doesn’t work, change battery.

74

Q: The chime bell doesnâ&#x20AC;&#x2122;t work.

A: 1. Check the chime bell setting.

2. Check if it is in wait mode.

3. Check the battery of door sensor.

Q: In case the function button does not work well A: 1. The function button may not work well if the phone connection is inadequate. Press the function button for a long time.

75

Technical Support, Customer Care & Sales Technical Support If you need Technical Support regarding installation, programming or using the SAVERCALL-3000 system, feel free to contact our Technical Support Line at: Phone: (82-2)861-5333 Email: emark@hjsys.co.kr Customer Care If you would like to contact Customer Care for general questions, comments or concerns regarding Savercall-3000 or any other Hyun Joung Systemsâ&#x20AC;&#x2122; product, feel free to write to our Customer Care Department at: Attn: CUSTOMER CARE Hyun Joung System Co., Ltd. Seoul, Korea Email: emark@hjsys.co.kr Sales If you need Additional or Optional Accessories for Savercall-3000, feel free to contact our Sales Department at: Phone: (82-2) 861-5333 Email: emark@hjsys.co.kr General Information Regarding Savercall-3000 For general information, feel free to visit our website at: www.hjsys.co.kr

We at Hyun Joung System Co., Ltd. would like to thank you for your patronage, and we look forward to your continued support.

76

Warranty Information The following product is covered by the Manufacturer’s Warranty for a period of one (1) year from the purchase date. All terms and conditions of this warranty are stated within. The purchaser must register (by following the instructions on the attached Warranty Registration Form) within 60 days of the purchase date to qualify for warranty coverage.

Product: Savercall-3000, Do-It-Yourself Wireless Security System

Covered by Warranty

Not covered by Warranty

•

Factory defects

•

Batteries

•

Product malfunction

•

Damage or malfunction due to customer abuse or negligence

•

*All parts and labor are covered under

Defects from repair or assembly by

the conditions of this Warranty. Parts

an unauthorized service company or

that become obsolete will be kept in

individual •

manufacturer’s stock for up to three years. Manufacturer reserves the right to

Defects from the use of non-OEM, after-market parts or accessories

•

replace any part with equal or better quality as deemed necessary.

Defects from natural disasters, including but not limited to: fire, earthquake, flood, lightning, etc.

NOTE: The Manufacturer shall have no liability for any death, personal and/or bodily injury and/or damage to property or other loss, whether direct, indirect, incidental, consequential or otherwise, based on a claim that the Product failed to function.

77

Warranty claims, repairs and exchanges

Please submit all Warranty claims/requests in a letter to the address listed below, along with any defective merchandise. Please include the following information: 1)

Your name, address and phone number

2)

The product name and model number

3)

The part name or part number being returned

4)

A description of the defect/malfunction

Hyun Joung System Co., Ltd.

Product: Savercall-3000

Warranty Registration Form

Hyun Joung System Co., Ltd. now offers two easy ways to register your product under Warranty: 1) Register online at www.hjsys.co.kr (Just click on the Warranty Registration Form, fill it out and submit it), or 2) Fill out this Warranty Registration Form and send by e-mail to us-at: emark@hjsys.co.kr Name:______________ _______ Purchase Date:_______________ Address:_________________________________________________ City:____________________________State:_________

78

Zip:__________

MEMO

79