FC&A December 2018

Download the fc&a app for iPhone, iPad and Android. Search ‘fc&a’

December 18

Issue 106

www.fca-magazine.com

Make Architects rewrites history

Brexit – deal or no-deal?

State-of-the-art waterproofing

Make's reimagined London Wall Place

How works, goods and services can

How one waterproofing manufacturer

commercial project references the deep

be procured across the EU in a no-deal

met the spec for one of the largest

history of the site's vicinity

Brexit scenario

green roofs in Europe

CRL Langle Glass Partition Wall Systems With its partition wall systems Office and Office XL, CRL offers a creative and effective solution for modern interior design.

Advantages

The dry-glazed system is easy to assemble and install.

It includes a frame for wall and ceiling mounting and a door frame that produces maximum transparency.

• Suitable for many common hinge and lock types

• Complete dry-glazed system, no wet sealing necessary • Door hinge fully height-adjustable, no drilling and milling necessary • Matching frame profile for glass to glass and glass to wall • Can be executed as single or double glazing (Office XL) • Airborne sound insulation to EN ISO 10140 (Office XL)

Applications • Office glazings and glass partition walls

• Glass door: 8 to 12 mm (10-12 mm for Office XL) • Fixed side panel: 8 to 16 mm (20-28 mm for Office XL)

• Interior glazings for private homes • Practices and chambers • Hotels and spas • Smoking areas

For information call FREE on 00 800 0421 6144 Our technical advisers can help you! e: CRL@crlaurence.co.uk f: 00 800 0262 3299 w: crlaurence.co.uk

DOOR HARDWARE

Editorial Comment FC&A is a proud supporter of the Chartered Institute of Architectural Technologists.

Mixed Media Information Barham Court, Teston, Maidstone, Kent ME18 5BZ Tel: 01622 232723 www.fca-magazine.com www.mixedmediainfo.com

Editor Rebecca Kemp rebecca@mixedmediainfo.com Editorial Assistant Paige Smith paige@mixedmediainfo.com Print & Digital Advertising Sam Ball sam@mixedmediainfo.com Print Design Manager Jack Witcomb jack@mixedmediainfo.com Digital Design Manager David Perry david@mixedmediainfo.com Production Assistant Sofia Franchi sofia@mixedmediainfo.com Accounts/Credit Control Jackie Dearman jackie@mixedmediainfo.com Managing Director Sam Ball sam@mixedmediainfo.com

Terms and Conditions: Contributions are invited and when not accepted will be returned only if accompanied by a fully stamped and return addressed envelope. No responsibility will be taken for drawings, photographs or literary contributions during transmission or in the editors hands. In the absence of an agreement the copyright of all contributions, literary, photographics or artistic belongs to Mixed Media Information Ltd.The Publisher accepts no responsibility in respect of advertisements appearing in the magazine and the opinions expressed in editorial material or otherwise do not necessarily represent the view of the publisher.The Publisher does not accept any liability of any loss arising from the late appearance or non publication of any advertisement.

Front cover: Make Architects has rewritten history at London Wall Place.

See page 19.

Magazine December 2018

Welcome

to Future Constructor & Architect...

W

ith next year in reach and Britain preparing to leave the EU on 29th March 2019, there's a stale air of uncertainty lingering over the nation as Theresa May works on a Brexit deal.

Currently, much scepticism is emerging surrounding May's deal not only from dubious citizens but also from economic forecasters such as the Bank of England, which predicted that if the country voted to remain within the EU, gross domestic product (GDP) would have grown by at least 1% within five years' time1.

With an expected departure date in plain sight, the construction industry's concerns over Brexitrelated matters not only include skills shortages, labour deficiencies and price hikes of materials but also disquiets over how British businesses within the UK construction realm will continue to bid for work, goods and services within the EU. FC&A has talked to two representatives from top transatlantic law firm Womble Bond Dickinson regarding construction and EU procurement in a No-Deal Brexit scenario. Katherine Eddon, Head of the Public Procurement Unit, and Michelle Essen, Managing Associate Practice Development Lawyer, look at the industry's concerns surrounding EU bids and reveal if the Government has provided clarification in the event of a No-Deal Brexit.Turn to pages 26-27 to read up on their account of a No-Deal Brexit.

Elsewhere in this issue, FC&A explores two very different yet remarkable UK-based projects. Firstly, on pages 44-45, Howells Patent Glazing talks through the history of one of the UK's most popular theme parks, Alton Towers Resort. In this article, the glazier discusses the preservation of the site's historical features and explains how it met the pencil-line requirements of English Heritage when creating a glazing package for the park's Gothic Revival architecture. Meanwhile, on pages 34-35, Carlisle Construction Materials explains how it met the spec at the outstanding new premises of a world-renowned Scottish distiller.

Finally, on behalf of the team at FC&A's publishing house, Mixed Media Information, I'd like to wish all our readers a very merry Christmas and a happy New Year. https://www.theguardian.com/politics/2018/nov/28/economic-forecasts-strike-blow-to-theresa-mays-brexit-deal

1

Rebecca

+

Find all of our features and more online, plus our comprehensive archive area, at fca-magazine.com or on the fc&a app. Search ‘fc&a’.

Rebecca Kemp Editor, Future Constructor & Architect

Follow us on Twitter: @fcamagazine

NEW CRL Hydraulic Patch Fittings with Backcheck • Flush mount - No hole required in the floor

• Maximum door weight: 100kg

• Includes two adjustment screws to adjust the latching speed and the swing speed

• Maximum door width: 1m

• For interior use only

• Also available as part of an all-glass door kit

• For 8 to 12mm toughened glass

For more information, call free on: 00 800 0421 6144 or email crl@crlaurence.co.uk

DOOR HARDWARE

Find this issue plus much more on the fc&a app and fca-magazine.com

3

www.selectaglaze.co.uk info@selectaglaze.co.uk 01727 837271

PRODUCT: A grade II* Listed deconsecrated church in Cosway Street London has been fitted with 66 Series 42 fixed lights and 22 Series 80 3 pane horizontal sliders.

BENEFITS: • Requirements were to achieve a 46dB noise reduction as well as comply with Part K of the Building regulations providing a balustrade for guarding on the mezzanine level.

www.firmanglass.com sales@firmanglass.com www.firmanglass.com

01708 374534

PRODUCT: Bespoke double-glazed units for commercial and domestic architectural projects, silicone-sealed using Dow Corning 993.

BENEFITS: Firman Glass can manufacture toughened glass upto 3000mm wide x 5000mm high and has sophisticated software packages to assist with U value and G value calculations, wind, barrier and snow loadings and bolted glass applications.

Contents News 26 Legal & Business:

FC&A talks to Kathrine Eddon and Michelle Essen at law firm Womble Bond Dickinson about what lies ahead before and after March’s withdrawal date for Brexit.

32 Voice of the Industry:

How much do you know about the types of certifications offered by the British Board of Agrément (BBA)?

Features 19 London Wall Place, Make Architects:

Reinstating London’s history, Make Architects has created the largest set of public gardens to be developed in the city. Comprising two office buildings submerged in extensive public realm, the scheme references the deep history of the site.

28 Technical Insight: Timber: The Structural Timber Association’s Chief Executive, Andrew Carpenter, offers his perspective of selecting optimum building solutions to meet clients’ needs and, most importantly, budgets.

34 Acoustics:

Sophie Weston, Channel Marketing Manager at Geberit, runs through four materials that are suitable for acoustically optimised drainage pipes and fittings for a sound specification.

36 Build Focus: Passivhaus:

Here, Nicolas Tye explains how he takes the Passivhaus approach as an Architect.

40 Building Envelope: RCI:

The standout domed roof of Scotland’s renowned whisky producer, Macallan Distillery’s brand-new headquarters in Aberlour, Scotland, is a truly outstanding spectacle.

19

42 Waterproofing:

As a central part of any build process, structural waterproofing may not be the costliest aspect of a build – in fact, Delta Membrane Systems predicts it makes up between 1 and 2% of the total cost of construction – however, get it wrong; and it can be expensive to remediate.

44 Glass & Glazing:

26

Back in 2010, Alton Towers commissioned the restoration of one of the resort’s most historical buildings, the house conservatory. It was down to one professional glazing brand to meet the slim, pencil-line requirements of English Heritage.

46 Floorcoverings:

As we head into a new year, Interface’s Concept Design Team Leader, Laura Light, looks back on some of 2018’s most prevalent flooring trends and forecasts what’s here to stay for the year ahead and the latest emerging trends.

40

Best Standards & Best Practice - Just Ask Technical Manual

Technical Seminar

New 2019 Technical Manual includes new construction solutions and numerous beneficial updates.

Event seminars in your region as well as presentations on your premises.

Register to secure your copy now

Products with risk reduction features not offered by alternatives.

01935 474769

8

enquiries@cavitytrays.co.uk

www.cavitytrays.co.uk

Find this issue plus much more on the fc&a app and fca-magazine.com

New booking period for seminars now open to September 2020.

Yeovil • Somerset • England • UK

CAVITY TRAYS specialism • experience • service

LEVATO MONO

Porcelain paving system and coordinating internal tiling Surface 360, formally The Deck Tile Co, has 130+ colours and finishes in their Levato Mono 20mm porcelain paving tile ranges. Plus create a seamless visual transition between internal and external spaces with coordinating interior 10mm porcelain tiling.

• For both residential & commercial use.

• Ideal for balconies, roof terraces, garden decking and piazzas.

• Various sized 20mm thick porcelain tiles.

• An eternal zero maintenance product - offering over-life savings.

• Timber, stone & cementitious effects.

• ‘Floating floor’ – installation over single ply membranes.

• Height adjustable/slope correcting support system: 9mm - 550mm.

• Lightweight – 45kgs per m2.

INTRODUCING OUR NEW WEBSITE: WWW.SURFACE360.CO.UK

• • • • • •

Highly abrasion and stain resistant.

Highly slip resistant: R11 (ABC).

High load bearing.

Impact resistant.

Completely non porous.

Frost proof.

Industry Updates

NEWS

CONTACT US

FC&A rounds up the latest industry news

In Brief

2018 Brick Award winners

With NHBC figures for new house registrations at their highest level since 2007 and DCLG projections showing that household numbers are set to increase at the rate of 210,000 per year, it is just as well that brick manufacturers are continuing to perform strongly.

Brick production in September was up 8.5% on the same month last year, broadly consistent with the 9.5% increase in the rolling 12-month comparison to the previous period.

Monday 5th November saw the crowning of the 2018 Brick Awards winners, a ceremony that for 42 years has celebrated the best use of brick in the built environment.

Brick production keeping pace

BRE and USGBC partner

BRE (the Building Research Establishment) and USGBC (U.S. Green Building Council) have announced a partnership that will promote the expertise of both businesses and harness their combined industry insights, to deliver a new industry approach to building and built environment performance, solutions and benchmarking.The two organisations aim to highlight the role that buildings can play in improving environmental, economic and health outcomes and to positively impact the quality of life of people around the world.Their joint vision is to create a better built environment that’s cleaner, more efficient, more sustainable and fully meets the world’s current and future urbanisation needs.

Disability Access Course staged

by BSRIA

BSRIA is delighted to be staging a new and exciting three-day industry course,‘Disability Access Legislation & Surveys’, which will ensure you are up to speed with all current legislation and guidelines to guarantee your building fully conforms with the DAA (Disability Access Audit).The DAA is the evaluation of a building or service and its accessibility to disabled people.The course will give delegates an overall understanding of the laws and legislation surrounding DAA. Delegates will undertake a tutored Disabilities Access Audit under the guidance of the course lecturer.The course will be held at BSRIA’s HQ in Bracknell.

10

Architects and contractors routinely enter projects of the highest calibre and this year was no exception.The title of ‘Supreme Winner’ fell to the exemplary Storey’s Field Community Centre & Nursery in Cambridge. Designed by architect firm MUMA, this outstanding community facility also won the ‘Public’ and ‘Outdoor Space’ categories.

The Storey’s Field Community Centre and Nursery serves the new community of Eddington on the North West Cambridge development.The 100-place nursery is arranged around three sides of a landscaped courtyard.

The courtyard is contained by a

Submit your news and comments to: editor@mixedmediainfo.com @fcamagazine

brick-paved cloister and provides a sheltered play garden for the nursery children, solving the need for security without fences. On the fourth side, the civic-scaled community centre addresses the new local centre.The project bowled over judges with its playful use of brick and stunning attention to detail, finish and form.

The task of shortlisting fell to a panel of experienced architects, planners, specialist brickwork contractors, developers and other design and brick experts, who produced a final shortlist of 108 entries. Domestic projects were then visited and reported back to the judging panel as a whole for debate.

Personnel SGP sports and leisure appointment Stephen George + Partners has appointed Umesh Mistry, focusing on client relationship and project management, particularly in the sports and leisure sector.

“I’m looking forward to bringing my extensive experience in the sports and leisure sector to SGP, to spearhead a new focus and develop new clients in the sector,” commented Mistry. He has over 30 years’ experience in the architectural profession and has developed his career at various companies, including GT3 Architects, Benoy and S&P Architects.With a prominent track record in design, development and delivery of a range of projects, both in the UK and overseas, Umesh's primary role is working alongside Managing Partner, James Nicholls.

Urban Edge Architecture appoints senior associate director Urban Edge Architecture has appointed Sonia Parol as Senior Associate Director. As part of her new role, Sonia will be looking to develop strategic business partnerships, further expanding Urban Edge’s workload into care and residential, as well as exploring opportunities for the use of innovative solutions such as modular construction. Sonia, who has worked for the practice for the last two years, has overseen Urban Edge’s continued growth into the care sector. Prior to joining the Urban Edge team, Sonia was also leading large-scale residential and PRS schemes in the rg+p office in Leicester.

Find this issue plus much more on the fc&a app and fca-magazine.com

Newcastle architect celebrates anniversary with a restructure

Leading North East architectural practice Pod Newcastle has restructured its management team as it prepares for growth following recent 10thanniversary celebrations.The firm, owned by equity Directors Craig and Ruth Van Bedaf, has made three senior promotions to its 12-strong team, based in the Toffee Factory, Newcastle.

Jens Rahmann, Adam Lee and Martin Clay have all been promoted from Senior Architect to Director. During the last five years, the firm has doubled its team from six, while also growing its fee income 100pc during the same period.

Industry Updates

In Brief Planning secured for William Morris home

Winners in full: Individual Housing Development Red House Small Housing Development Gospel Oak Infill Housing – Winner Scala Yard – Commended Large Housing Development Royal Albert Wharf – Winner Blackfriars Circus – Highly Commended Large Housebuilder Countryside Properties Urban Regeneration Silchester Housing – Winner Carmichael Court – Commendation

Commercial Television Centre – Winner John Lewis Oxford – Commendation

Outdoor Storey’s Field Community Centre & Nursery Craftsmanship Harpsden Wood House, Fusion Brickwork – Winner The Tropical Ravine – Commendation

Public Storey’s Field Community Centre & Nursery – Winner The Halifax Central Library – Commendation Education Malborough Primary School – Winner Stowe School, Girls’ Boarding House – Commendation Refurbishment Walthamstow Wetlands – Winner Turner’s House – Commendation

Specialist Brickwork Contractor Anglian Brickwork Worldwide APT no 7 – Brickweaving, Iran – Winner Rwanda Cricket Stadium – Commendation Architect’s Choice Creek Road

Innovation Coate St – Winner Step House – Highly Commended

Supreme Winner Storey’s Field Community Centre & Nursery.

Trending on Twitter COMBUSTIBLE MATERIALS BAN

“Have authorised the ban on combustible materials on new high-rise homes.

Regulations were laid in Parliament earlier today.

We are also giving support to local councils to carry out emergency work to remove and replace unsafe ACM cladding.”

– @JBrokenshire

“According to our analysis, at least 340 high-rise buildings, and 1338 high-risk buildings with combustible materials on them have not yet been identified. It is time to ban combustible materials on all high-rise and high-risk buildings.”

– @ROCKWOOLUK

“Government has confirmed its combustible materials ban – and it looks like #CLT is captured by the regulation?”

– @AlliHayman

“...Amendment to Building Regs coming into force on 21 Dec will affect buildings over 18m high.”

– @CIBSE

“Banning ACM cladding is great news @JBrokenshire, however, we need a ban and action on ALL combustible materials!! #claddingscandal” – @KateNHF “The ban means combustible materials will not be allowed on the external walls of new buildings over 18m containing flats, hospitals, residential care premises, dormitories in boarding schools and student accommodation.”

– @SHPOnline

Carter Jonas has secured planning permission on behalf of the Society of Antiquaries of London for a new on-site education centre at Kelmscott Manor, alongside the conservation and refurbishment of the West Oxfordshire estate’s Grade I Listed heritage buildings.

Kelmscott Manor is a limestone manor house that dates from 1570 in the Cotswolds village of Kelmscott. It was built by local farmer Thomas Turner and remained in the family for generations, but is best known as the country home of the Writer, Designer and Socialist William Morris.Carter Jonas’ planning and development team worked closely with experts in the consultancy’s rural practice to vary a restrictive covenant in favour of Kelmscott Manor.

Progressive workplace design for Santander CNP TODD Architects has completed a progressive workplace fit-out for CNP Santander Insurance, undertaking the interior planning and configuration of its newlyconstructed offices at Three Park Place, Hatch Street Upper, Dublin 2. Following an in-depth staff consultation process,TODD Architects created a concept which considered and delivered a consciously ergonomic, contemporary workplace which meets the current needs of the staff, while also allowing for future expansion with the addition of a purpose-built sublet area.

Massive backing for 100% Hackitt More than 100 organisations and individuals across the construction sector have signed up to support the 100% Hackitt initiative. Supporters include architects and designers, fire safety and building consultants, firefighters, trade associations and builders and property maintainers.

The 100% Hackitt initiative was started by LABC and BBA with the aim of bringing together influential individuals and organisations who support the systemic change in the construction industry proposed by Dame Judith Hackitt.

In addition to keeping pressure on ministers to adopt all 53 Hackitt recommendations, it will also provide opportunities for those in the industry to discuss cross-disciplinary issues and share best practice.

Find this issue plus much more on the fc&a app and fca-magazine.com

11

Industry Updates

Architect in Profile

Ben Humphries is Director at Architype

www.architype.co.uk

12

Please tell us a bit about your career background I studied for both degrees at Newcastle University. In between those it was a recession in the UK, so I did my Part 1 experience in Malaysia where I had a great year working for Pakatan Reka Arkitek in Kuala Lumpur. For Part 2, I worked briefly on some great competitions for Ushida Findlay in London and then an intense year with a sole practitioner, Gareth Wright, where I worked on a variety of projects including a lovely school building in Bath.

I joined Architype in 2000 and became Director of the London office in 2015.

Had you always wanted to pursue a career in architecture?

I loved art from an early age. My head, an amazing teacher called Brian Thompson, used to take us places like the British Museum and Kew Gardens to sketch the artefacts and buildings.Towards the end of secondary school, I started thinking about architecture as an option, especially after a visit to Florence, and at A-level, when studying Bauhaus and architects like Walter Gropius and his proposals for affordable housing, I became certain that this was the direction I wanted to take.

Who has been your greatest influence?

It would be very hard to single out one greatest influence.

My father, who was a brilliant Scientist, taught me about the fragility of the earth, and living within our means – my interest in our planet and nature and my commitment to sustainability undoubtedly stems from him.

From university days onwards, I was very influenced by the organic strand of Modernism – Haring, Scharoun and Aalto, and also architects such as Ralph Erskine and Hermann Hertzberger, with their humanist approach to design. Gareth Wright was a big influence and mentor – he taught me about materials, the importance of light and landscape, and how to detail – and I also learnt huge amounts from Architype Founder Bob Hayes – “a good building comes from a good brief and a good brief comes from good consultation”.

What’s your most notable project?

The Enterprise Centre at the University of East Anglia, which I have spent a good proportion of the last seven years of my life on! It is an exemplary low-carbon building, built to the Passivhaus standard, and uses a high proportion of local and natural materials. I am very proud of how the whole team worked together to deliver a special building and one where we have had such good feedback about how it performs in use. It is perhaps best known for its thatch facades – developing this aspect of the design, in collaboration with Morgan Sindall and the thatchers, led by Stephen Letch, through a series of full-size trials, was an experience I’ll never forget.

Find this issue plus much more on the fc&a app and fca-magazine.com

What’s the greatest challenge for designing in sustainability?

Having worked at Architype for 18 years, designing in sustainability is second nature, but holding onto it does sometimes require a bit of attitude and tenacity. It’s important to really understand and be able to explain to clients and endusers what the many benefits of sustainable buildings are.

What is your favourite building?

So tricky! I don’t have an absolute favourite, but the Katsura Palace in Kyoto is a building that I could have happily stayed in for a very long time!

What do you think is the greatest challenge for architects today?

Designing for climate is a challenge that we simply must take seriously.The recent IPCC report could not be clearer. It is indefensible to still see projects that make no effort to tackle this issue – we have the tools out there! From a business point of view, the current uncertain political and financial climate have meant an ever more competitive market, so we are having to invest more time in business development, marketing and bids.

What can we expect to see from Architype over the next year?

We have a number of buildings completing on site, including a new Passivhaus archive for the Imperial War Museum and a zero-carbon primary school for London Borough of Sutton.

We will also see our secondary school complete in Sutton, which is the first whole Passivhaus secondary school in the country.

You can expect to hear about results from more of our postoccupancy and research projects that we are currently investigating.

■

©Jeremy Peters

The Enterprise Centre is an exemplary low-carbon building, built to the Passivhaus standard, and uses a high proportion of local and natural materials

©Nick Caville, BDP

Following his participation in Knauf AMF’s roundtable in October, FC&A caught up with Architype Director Ben Humphries to find out more about his career as an Architect and learn of his true devotion to sustainability.

How Alternative Dispute Resolution can speed up the planning process Whether you’re looking for a dispute resolver or want to gain the skills and expertise to act as one, we offer a complete range of methods for resolving disputes in the planning sector and other areas of the built environment.

• Conflict avoidance services

• Training and qualifications

• Panel of expert dispute resolvers

• Bespoke in-house training delivered to your team

Find out how RICS can help you avoid and resolve disputes today t +44 (0) 24 7334 3806 e drs@rics.org w rics.org/drs

P B S ARY

LIBR

sustainable-buildingproducts.com

sustainable-buildingproducts.com Your essential new reference for sustainable building product information web | mobile | tablet

Find this issue plus much more on the fc&a app and fca-magazine.com

13

Fine Flower – Dubai Heart, city waterfront, Dubai

Organic architecture

Fact File: Official name: Fine Flower – Dubai Heart

Following its ‘Urban Lung’ project that embellished the pages of June’s issue, Yaoundé-based firm HKA | Hermann Kamte & Associates returns to this month’s issue with another feast for the eyes, Fine Flower – Dubai Heart; which is set to be the largest leisure park in the world.

14

Team: Hermann Kamte, Architect and Designer, Ange Djoke, Architect, Joseph NdI, Architect and Urban Planner

Dubai is representing culture across the globe aside its position as a business centre.

People are travelling to Dubai from across the world to discover technology and to observe architectural designs. Fine Flower – Dubai Heart is planned to be the largest leisure park not only in the city but the world.To be the most complete waterpark in the world, the project is dealing with the relationship between architecture and nature.The design has identified the need to explore the connection between humans and three main elements – water, earth and air. The project is set to hold the record for the world’s tallest artificial waterfall.

The challenge consists of creating a space that will provide a leisure atmosphere with respect for the environments. Fine Flower – Dubai Heart has a heart-shaped design surrounding the towers.The project is inspired by the shape of a flower, a natural element which needs water, air and earth to grow.

Find this issue plus much more on the fc&a app and fca-magazine.com

t

H

KA | Hermann Kamte & Associates has unveiled its proposal for an iconic waterpark in the Middle East named Fine Flower – Dubai Heart. The design intends to break the record for the largest iconic leisure park in the world, the tallest water slider and the largest man-made waterfall building.

In 2017, HKA | Hermann Kamte & Associates was invited and selected to a restricted international competition by the Dubai Municipality to reinvent the city waterfront by proposing an entertainment centre which could be the new iconic place of the city. Directed by Architects Hermann Kamte (Creative Director), Ange Djoke (Architect) and Joseph Ndi (Architect and Urban Planner), the architectural concept seeks to play a leading role in tourism attractions, sports and healthy social life in Dubai.

Location: Dubai, United Arab Emirates

Fine Flower – Dubai Heart, city waterfront, Dubai

Find this issue plus much more on the fc&a app and fca-magazine.com

15

Fine Flower – Dubai Heart, city waterfront, Dubai

■

The design is addressed to the young, the old as well as families who want to relax and share unforgettable moments in the Middle East. The site provides a gathering point for practising sports and water activities. Furthermore, for visitors, the project utilises different methods to educate, excite and entertain.

Consideration is given to the advanced high-technology facilities.

Fine Flower – Dubai Heart is a small island divided into several elements to encompass the different activities such as the main step heart-shaped building, tall water slides and towers, a water activities plaza, sports activity areas, children’s water zone and water playground, cafes and restaurants, a gift shop and shopfront zone, a facility building for lockers, showers and toilets, roof shops and activities, a panoramic restaurant tower, visitor's service facilities (ticketing and information), front gate security and administration facilities, sea-sand beach areas, water jogging walkways, food service areas, open-theatre plaza services, outdoor exhibit support facilities and the project has the ability to insert marina within the project; museums, etc.

The scheme aims to increase the awareness of Dubai to the global audience and to attract more tourists.

www.hermann-kamte.com

16

Find this issue plus much more on the fc&a app and fca-magazine.com

London Wall Place, London, UK

History repeats itself

Fact File:

Make Architects has completed work on its London Wall Place project, a new commercial scheme offering the largest set of public gardens developed in the City of London since the post-War Brutalist Barbican estate on behalf of Brookfield Properties and Oxford Properties. made a central part of the public realm, while the elevated walkways of the 1960s have been reimagined and reinstated.The architecture is designed to be a backdrop to these landmarks, not competing but simply becoming the setting.

Sam Potter, Lead Architect at Make, said: “The beauty of this project lies in recognising it is simply the latest layer in the history of this site, the next trace to be remembered.

We’ve designed state-of-the-art offices, but it’s the combination with the public realm that has attracted the occupiers, not just the commercial spaces themselves. It is about bringing in a social, human, tactile scale to the city, and the architecture is all the more successful for the spaces around it.”

t

T

he scheme comprises two office buildings surrounded by extensive public realm including a series of public gardens and reimagined elevated pedestrian walkways to link the neighbouring Barbican with the City of London.

The project’s concept lies in referencing the deep history of the site, from the Romans through to post-War Modernism.The scheme’s geometry is aligned with the historical urban grain created by the section of the original Roman city wall on site and its materials reference those used to build the wall. Both the wall and the Medieval St Alphage Church tower on site – hidden from public view since the 1960s – have been beautifully restored and

Site size: 2 acres/75,000m2 Net size: 46,450m2 Client: Brookfield Properties and Oxford Properties Key consultant, structural engineer, facade engineer, highways engineer, security consultant, acoustic engineering: WSP MEP engineer (also sustainability consultant and fire engineering): HPF Landscape architect: SpaceHub Specialist lighting: Studio Fractal Contractor: Multiplex Project management and cost consultant: Gardiner and Theobold

Find this issue plus much more on the fc&a app and fca-magazine.com

19

Blloku Cube, London Wall Place, Tirana,London, Albania UK

Tim Wells, Development Director at Brookfield Properties, said on behalf of the joint venture: “The scheme’s ability to connect modern business with historic London and offer new perspectives from the revitalised high-level walkways sets it apart from any other development in London and further strengthens Brookfield Properties’ placemaking credentials. At London Wall Place, we have developed world-class office space in an exceptional and unique environment for the benefit of

20

all the building’s occupiers, neighbours and visitors alike.”

With half of the site dedicated to the public realm, London Wall Place has created a new destination for the city. It has also initiated plans to reduce the dominance of the London Wall dual carriageway, which was narrowed to prioritise pedestrian and cycle movement as part of the scheme.

The public realm is formed of a series of pocket gardens for people to discover that, together with the adjacent Salters’

Find this issue plus much more on the fc&a app and fca-magazine.com

Hall Garden and soon-to-be-completed St Alphage Garden, delivers more than 1.5 acres of public space and over 780m2 of green walls across multiple terraced levels.

The walkways, which include four bridges that cross London Wall, Wood Street, Fore Street and Fore Street Avenue, cover 350m and house a new raised garden. The varied levels are conceived as a continuous threedimensional landscape, providing pedestrian connection, sanctuary from the city or simply somewhere to lunch.

London Wall Place, London, UK

LOWER GROUND FLOORPLAN 9

22

20

10

17

15

26

7 3 2

4

18

14

6

21 12 24

5

1

10

01. Remains of tower of Elsing Spital 02. Remains of Roman city wall 03. Salters' Garden 04. English gardens 05. Public gardens 06. Public routes 07. Stair access to city walkways 08. Lift access to city walkways 09. Entrace to Salters' Hall 10. Fern courtyard 11. St Alphage Garden 12. Retail terrace 13. Drop-off to 1 LWP

The two buildings enclose the new London Wall Place gardens. 1 London Wall Place delivers 310,000ft2 of new state-ofthe-art office and trading facilities, and a series of nine roof terraces over 13 storeys. In 2013, 1 London Wall Place was entirely pre-let to Schroders marking a significant turning point in the commercial real estate market as the largest deal signed in London since the beginning of the global recession.

13

6

KEY:

State-of-the-art facilities

6

2 London Wall Place is a multi-tenanted 17-storey tower, with a retail and restaurant unit at level one and a cafe at ground level. As of the end of May 2018, it was 73% let with international law firm Cleary Gottlieb Steen & Hamilton taking the top four floors, for a total of 48,000ft2.

The two buildings share the same striking appearance, with contrasting sections of vertical rectilinear bands of glass-reinforced concrete (GRC), and dark blue ceramic ribs that form a vertically elongated grid.

14. Drop-off to 2 LWP 15. 1 LWP office reception 16. 2 LWP office reception 17. 1 LWP loading bay 18. 2 LWP loading bay 19. Level 01 retail entrance 20. Office 21. Retail 22. Car lift 23. Motorcycle lift 24. Entrance to 2 LWP 25. Entrance to 1 LWP 26. Entrance to 121 London Wall 27. Entrance to 60 Wood Street

The materials were inspired by the Kentish ragstone found in the Roman wall, with the GRC echoing the smooth, matte appearance of the stone’s chalky exterior, and the iridescent blue ceramic reminiscent of the stone’s glossy interior. The verticality is a foil to the horizontal form of the neighbouring area of Barbican.

The concrete sections hide the services and elevators and have defined, sharp edges whereas the ceramic bands are curved and more fluid and clad the office floorplates.

Find this issue plus much more on the fc&a app and fca-magazine.com

t

27 19

16

25

8

11 23

15

6

21

London Wall Place, London, UK

t

The vertical banding serves to minimise heat gain and draw in more sunlight to the occupied areas. The grain and scale expressed along the facades continue to form the soffits and the roof plant enclosures and guardrails. In this way, the rhythm of the building’s facades is extended like ‘ribbons’ up, along, over and down the extent of the building’s mass. On 2 London Wall Place, they flow into the building to form the ribs of the reception ceiling, while on 1 London Wall Place, they form the cantilevered soffit – some of the largest cantilevers in London – and their surfaces bounce light and reflections onto the walkways and landscaping below.

22

Find this issue plus much more on the fc&a app and fca-magazine.com

steam sho wer constr ucted from Schlüter ®K E R D I- B O ARD waterproo f, backer boar cement free d and seale d with Schlüter ®K E R D I- D S

Schlüter ®KERDI waterproo fing membr an

e

Schlüter ®D IT R A - H E AT electric und ertile heatin - E - D U O g and s reduction fo r wall and fl ound oors

Schlüter ®D IL E X movement joint Schlüter ®to complem P R O F IL E S ent tile and stone

Schlüter ®D IT R A 2 5 uncoupling and CE mar ked waterproo fing

Schlüter ®BE hydronic un K O T E C - T H E R M derfloo modular scr r heating and eed system

PROBLEM SOLVED

Schlüter®-SUBSTRATES When specifying substrates, you need a system you can trust.

Our Schlüter®-BEKOTEC floor assembly systems and Schlüter®-KERDI-BOARD substrate for walls, offer flexible, easy-to install substrate solutions, suitable for use in commercial and residential installations with tile and stone coverings.

Backed up by expert technical whenever, wherever you need it.

support,

Making the decision to choose Schlüter-Systems even easier.

To find out more call 01530 813396 or visit www.schluterspecifier.co.uk

London Wall Place, London, UK

The ‘Highwalk’ system, a reminder of the previous 1960s site, was a requirement of the planning consent. The walkway network now has a material palette of weathering steel and iroko timber as a backdrop to the ever-changing gardens and green walls which seamlessly link the various levels. Thousands of plants, including strawberries, lavender and ivy, are distributed to suit various microclimates within the site, from the sun-blessed Salters’ ‘cascade’ to the sheltered water garden and ‘amphitheatre’ around the St Alphage remains. These spaces will provide a welcome respite for the 5000 occupants of the new office buildings, retail customers, Barbican residents and future Crossrail commuters.

24

Find this issue plus much more on the fc&a app and fca-magazine.com

The building is BREEAM ‘Excellent’ rated and designed flexibly to accommodate numerous tenancies throughout its lifespan, while the intent for the public realm is that it endures – as the Roman wall and St Alphage Church tower have – for as long as possible, as part of the historical urban fabric.There is a passive approach to energy in use, with a 50/50 solid-to-glazed ratio in the building facades, which are all heavily insulated, and with deep soffit areas to reduce solar gain.The air handling is a mixed mode to allow both buildings to be naturally ventilated if desired.

The materials – GRC and ceramic – are designed to never need replacing, and the weathering steel was chosen for the bridges so that minimal maintenance is required.

■

Historical connections

www.makearchitects.com

London Wall Place, London, UK

The building is BREEAM ‘Excellent’ rated and designed flexibly to accommodate numerous tenancies throughout its lifespan Find this issue plus much more on the fc&a app and fca-magazine.com

25

Legal & Business

Kathrine Eddon is Head of the Public Procurement Unit in the UK and has over 16 years’ experience as a specialist Public Procurement Lawyer. Her clients include UK central Government departments and their agencies, local authorities, housing associations, universities, utilities, police and fire authorities and NHS hospitals, as well as suppliers, from SMEs to seasoned international bidders.

Michelle Essen is a Managing Associate Practice Development Lawyer specialising in construction law.

She has 13 years’ prior experience of advising clients on construction and engineering matters.

26

Construction and EU procurement in No-Deal Brexit – has Government provided clarity?

With the end of the year nigh, many are relieved to see the back of 2018 – the renowned year of ‘uncertainty’, arduous negotiations and back and forth deal or no-deals. However, three months into the fresh, new year of 2019 lies ‘D-day’ for Brexit. Here, FC&A talks to two representatives from top law firm Womble Bond Dickinson about what they believe is on the horizon for the industry prior to and after March’s predicted events. Kathrine Eddon, Head of the Public Procurement Unit, and Michelle Essen, Managing Associate in Construction, take it from here...

Find this issue plus much more on the fc&a app and fca-magazine.com

Legal & Business UK-based contract opportunities would no longer be advertised to the EU on OJEU/TED and would instead be advertised on the new replacement UKspecific free-to-use e-notification service This UK e-notification service will be available from ‘exit day’ The requirement to advertise and ability to access other UK domestic systems will remain, e.g. on Contracts Finder, MOD Defence Contracts Online, Public Contracts Scotland, Sell2Wales and eTendersNI UK businesses who wish to tender or bid for EU contract opportunities may continue to do so via OJEU/TED To enable the above, some changes to how the current procurement rules operate may be necessary, and these will be made by amending existing UK legislation.

n nearly three months’ time, on 29th March 2019, at 11pm UK-time to be more exact, the UK is expected to leave the EU. The construction industry has already started to feel the impact of Brexit, and has ongoing concerns about, amongst other things, skill and labour shortages, the increasing price of materials, potential import and export tariffs.

Another area of concern for the construction industry has been how the system of advertising UK contracts for works, goods and services to EU companies would work post-Brexit and how businesses in the UK construction industry would be able to continue to bid for work, goods and services in Europe. This is important because many UK construction and consultancy businesses benefit and need to continue to benefit from smooth and open working relationships with EU businesses.

advertising them on the Official Journal of the European Union (OJEU) via Tenders Electronic Daily (TED). Equally, UK contractors, consultants, manufacturers and other construction businesses can bid to provide works, goods and services to EU public bodies through OJEU via TED. This means that, for example, a UK public authority procuring specialist offshore trenching and vessel services for a Government-funded offshore renewables project can receive tenders from specialist construction companies throughout the EU. It also means that UK companies, for example, a UK architectural business, can tender for a commission to design a high-profile development project in Spain on the same basis as companies based in other EU member states.

But post-Brexit, without a deal, this position would change.

The Government’s position

The Government’s guidance

While the Government continues to negotiate with the EU, in the hope of reaching agreement on a number of key points in the next few months, it is also starting to prepare for a ‘ No-Deal Brexit’.

As part of that, the UK Cabinet Office recently released guidance entitled ‘Accessing public sector contracts if there’s no Brexit deal’ which sets out how works, goods and services can continue to be accessed across the UK and EU in the event of the UK leaving the EU without an agreement in place.

There are two key messages in the Government’s guidance ‘Accessing public sector contracts if there’s no Brexit deal’.

First, the UK is aiming to accede to the World Trade Organization (WTO) Agreement on Government Procurement (GPA).The GPA is an international trade deal that the UK currently participates in by virtue of its EU membership, but in a No-Deal Brexit world, the UK will need to become a member itself. Whilst this is not a new position it does confirm that there has been no change to the Government’s position on the need to seek GPA membership.

Second, the UK will develop a UK version of OJEU/TED, which it refers to as “a replacement UK-specific e-notification service”. The guidance states that:

The current system At the moment, UK public bodies and authorities can procure certain works, goods and services for construction projects, including from EU businesses, by

So, has the Government provided clarity?

In part, yes. The Government has at least given some insight into its thinking about how works, goods and services can be advertised and procured across the EU in the event of a No-Deal Brexit.

However, there is very little detail around how this will work in practice.

In particular, while the guidance says that: “Suppliers who wish to access contract opportunities from the EU may continue to do so via OJEU/TED”, it is not clear whether this position would be agreed to by the EU or whether they would have to access OJEU/TED as thirdcountry participants.

UK public authorities, construction companies, construction industry professionals and other construction industry businesses may also be concerned that, during a period in which they deal with other challenges that may arise for their businesses due to Brexit (such as skill and labour shortages), they will potentially also have to familiarise themselves with a new UK e-notification service.

One thing is clear though, with no agreement yet reached with the EU, and with the Brexit date looming in a matter of months, the Government should be working hard behind the scenes to flesh out its guidance, to provide certainty for UK public authorities and the construction industry before 29th March.

We would hope to hear more on this by the end of this year.

■

I

The Government has also said that further information will be provided nearer to the Brexit date.

www.womblebonddickinson.com

Find this issue plus much more on the fc&a app and fca-magazine.com

27

Technical Insight: Timber

E Structural timber systems – the adoption of assembly principles There are many aspects to consider when designing a building – from the building system and sustainability to ongoing performance and costs. With numerous routes to take along the design and construction journey, selecting the core structural solution is one of the most important decisions. Andrew Carpenter, Chief Executive of the Structural Timber Association, offers his perspective on how to select the optimum building solution to meet the budget and specific needs of the client.

t

CCG – advanced off-site manufacturing

very project is unique, and the client’s brief influences each design decision. Defining key drivers is, therefore, crucial in establishing the desired project outcomes. If the client intends to occupy the building for years to come, the brief may vary from that of a developer client with a remit to achieve a quick and efficient sale or, in the case of retail projects, to start trading and generating revenue as soon as practically possible. Structural timber systems can ‘tick’ many of the build and performance boxes.

With impressive environmental credentials, along with cost and time efficiencies, factorymanufactured structural timber systems with increased levels of prefabrication – offer greater control over quality, productivity and predictability. Integrated construction systems such as closed panel timber frame, structural insulated panels (SIPs) and volumetric modular options are now driving innovation in the timber industry – offering more choice than ever before.

With standards for efficiency constantly ramping up, the construction industry has faced a real challenge in creating buildings that achieve the actual energy performance that is specified in the design brief.The accuracy and control involved in using timber-based off-site technology overcome this issue.

By investing in a robust, airtight building, operators and occupiers will see the longterm benefits that come from reduced maintenance and running costs – vital for public buildings such as schools and hospitals.

Residential, retail and commercial developers have their own prerequisites with an emphasis on speed of construction – off-sitemanufactured structural timber systems offer a faster return on investment for developers by delivering a quick and efficient build process.

The envelope needs to work for the owners and occupiers to ensure it is energyefficient, low maintenance and provides a comfortable environment when the building is in use.There are many factors involved in achieving this and not just those that are visible. Considerations such as thermal performance, acoustic resistance, acoustic absorption and airtightness are all important factors when considering the build.Timber is uniquely placed to deliver on all requirements, not only for its sustainable credentials and aesthetic appeal but also its structural strength and adaptability.

For cities with complex underground infrastructures, such as London, there is an important financial equation – lighter equals taller. Lighter weight, structurally strong timber systems such as cross-laminated timber, reduce the impact on foundations so permitting additional storeys would be achievable using traditional materials such as masonry, concrete and steel.

28

Find this issue plus much more on the fc&a app and fca-magazine.com

INNOVATIVE INNOVATIVE FIRE FIRE ENGINEERING ENGINEERING CONSULTANTS CONSULTANTS

At At FDS FDS Consult, Consult, we we take take a a bespoke bespoke approach approach to to each each and and every every project. project. Our Our expert expert fifire re engineers engineers will will bring bring all all the the technical technical At FDS Consult, we take afor bespoke approach tothey’ll each and every project.ofOur expert fire engineers will bring allwouldn’t the technical know-how know-how you’re you’re looking looking for to to your your project, project, but but they’ll also also bring bring a a level level of creative creative thinking thinking that that you you probably probably wouldn’t expect. expect. know-how you’re looking for to your project, but they’ll also bring a level of creative thinking that you probably wouldn’t expect.

We’ll work work holistically holistically with with your your building building to to fi find nd solutions solutions that that enhance enhance its its safety safety whilst whilst remaining remaining true true to to its its design design concept concept and and We’ll We’ll work holistically with your building to find solutions that enhance its safety whilst remaining true to its design concept and working working practically practically with with its its end end use. use. Contemporary Contemporary buildings buildings need need to to maximise maximise safety safety whilst whilst exploiting exploiting modern modern construction construction working practically with its endarchitect’s use. Contemporary vision. buildings need to maximise safety whilst exploiting modern construction techniques techniques and and delivering delivering the the architect’s aesthetic aesthetic vision. techniques and delivering the architect’s aesthetic vision.

Contact Contact us us to to fifind nd out out more more about about what what our our innovative innovative approach approach to to fifire re safety safety consulting consulting could could deliver deliver for for you. you.

Contact us to find out more about what our innovative approach to fire safety consulting could deliver for you.

Telephone: Telephone: +44 +44 (0)1322 (0)1322 387 387 411 411 || Email: Email: info@fdsconsult.com info@fdsconsult.com || Visit Visit us us at: at: www.fdsconsult.com www.fdsconsult.com Telephone: +44 (0)1322 387 411 | Email: info@fdsconsult.com | Visit us at: www.fdsconsult.com

The

app

Public Sector Build Journal

for iPhone, iPad and Android Free download available now BROWSE | SPECIFY | SOURCE | DIGEST The smarter way to access news and products for the sustainable building market.

With its easy-to-navigate format, users can benefit from a variety of useful tools, such as the magazine’s latest issue, digital archive, suppliers and newsbank.

The App is also synced with SBP Library (www.sustainable-buildingproducts.com) providing an essential specification portal.

swipe to see more!

Find this issue plus much more on the fc&a app and fca-magazine.com

29

Technical Insight: Timber both in high-profile projects – which demand enhanced properties over and above standard Building Regulations in such areas as fire and noise protection – together with commercial applications requiring fast and cost-efficient construction. Detailed research and development into such systems positively contribute to building physics, ensuring actual on-site performance meets design expectations.

Stewart Milne Timber Systems – on site

Achieving best value

Concurrent processes Crucial to lean and advanced manufacturing is Design for Manufacture & Assembly (DfMA) protocols and Building Information Modelling (BIM). DfMA enables optimal configuration of off-site solutions on site by engaging with multi-discipline and multi-tier suppliers – ideally from the beginning of the design development process.This approach requires a change of mindset and a shift away from ‘traditional construction thinking’ to the adoption of assembly principles.

DfMA is used as the foundation for concurrent engineering processes, to simplify and fully optimise the structure in terms of budget, sustainability and performance – reducing manufacturing and assembly costs, with quantifiable improvements.

With recent industry reports underpinned by the recommendation made in the Building for Change Report by the House of Lords Science and Technology Select Committee – off-site construction

30

has been gaining ground as a build method that offers numerous benefits. A reduction in construction time is one of the most notable, as buildings rapidly manufactured off site are less weather dependent. This, together with an improvement in quality through enhanced production processes in factory-controlled conditions, offers more predictable build programmes.

And finally, the most important benefit to any construction team – off-site manufacture for on-site assembly – improves health and safety and reduces working at height.

The use of structural insulated panel systems, timber frame, glulam and crosslaminated timber in optimised hybrid systems has been well-documented. Recent advances in pre-fabricated timber cassettes have led to pioneering large-format roof and wall elements that deliver precise dimensions and custom-made performance values.

Due to the wide range of possible applications, timber cassettes are used

Find this issue plus much more on the fc&a app and fca-magazine.com

■

CCG – advanced off-site manufacturing facility

Value engineering in construction has enormous benefits to both developers and clients alike.The multi-step process is an integral part of the design and development stage and is aimed at increasing value.The time invested in value engineering produces results and can be a cost-saving measure; however, it is becoming a respected project management technique that addresses all aspects of the building lifecycle, from the initial construction through to the sustainability of sourced materials and utility efficiencies of the final project.

Measuring value is complex and specific to each project and client brief. Using DfMA protocols and off-site techniques to fully optimise the structure in terms of budget, sustainability and performance are essential to all construction projects.

Investment in a robust, airtight building will reap benefits in the long-term from reduced maintenance and running costs – vital for public buildings such as schools and hospitals. Housing developers, retailers and commercial end-users have a different set of priorities with speed of construction rating as one of the highest. Optimised hybrid timber structures offer a rapid return on investment for developers, together with delivering a quick and efficient build process for the retail and commercial sector.

www.structuraltimber.co.uk/library

Further information: There is a wealth of guidance and information available to construction professionals on the Structural Timber Association website; from advice on structural timber systems to market reports and an online member’s enquiry system.

All information is free to access in the STA Library, however, some documents are only accessible to STA members only.

Voice of the Industry

Ramona Donnelly is Operations Manager – Engineering at the BBA. She joined the BBA as a Project Manager in the materials department, progressing through various roles in different departments before taking on her current post. She oversees four teams of over 20 project managers specialising in four major areas (structural roof components, cementitious and ancillaries; structural building systems and cladding as well as civil and highways).

A brief insight into certificating building products and solutions The BBA – or British Board of Agrément to give it its full name – has been an established part of the UK construction industry for more than 50 years, with the sole aim of providing specifiers, installers, users, regulators, manufacturers, insurers and the public with the reassurance they require that building products are safe, reliable, fit for purpose and correctly installed, explains Ramona Donnelly, Operations Manager – Engineering at the BBA.

T

his remit includes encouraging the safe development and adoption of new and innovative construction solutions, where BBA certification is often considered imperative when a product enters the market, especially if there is no CE Marking available (see FC&A October).

It is a wide remit and one that takes the BBA in a number of directions but always with the desire to deliver the highest quality services, ranging from product approvals to installer schemes, management systems to product testing.

32

BBA certificates are the ‘face’ of the organisation and represent all that is best about the construction industry. Specifiers and contractors using products and solutions holding an Agrément certificate gained through the BBA’s independent, third-party assessment process know that they are fit for purpose and benefit from relevant product and regulatory information pooled together into one source.

But how much do you know about the various types of certification the BBA offers? Each category includes a number of schemes that apply to different sectors.

Find this issue plus much more on the fc&a app and fca-magazine.com

BBA product approval Product approval, as the name suggests, applies to construction products and systems which require independent third-party certification either to comply with applicable standards and regulations or to demonstrate superior quality and credibility in a competitive market. Bearing a product approval is a symbol of quality and reassurance, helping manufacturers ensure their products are accepted by specifiers, contractors, local authorities, insurers etc.

The main approval schemes are BBA Agrèment and BBA HAPAS certification.

In addition, the BBA also offers European Technical Assessments (ETAs), Certificates of Conformity (CoC), Certificates of Constancy of Conformity of Factory Production Control – also known as Certificate of Conformity of Performance (CoP) – Micro-Generation Systems (MCS) and Environmental Profile certification.

With so many acronyms, the approval process can be confusing, and guidance on how to select the correct certification for your needs depends on understanding what each offers.

BBA Agrèment certificate: this is a third-party approval document which demonstrates that a product/system has been independently assessed against UK Building Regulations and classified as fit for purpose for its intended use. It is a manufacturer’s quality assurance that supports its claims for that specific product and for a specific intended use. BBA Agrèment certificates are valid within the

Voice of the Industry

Microgeneration certification: assessment for this is carried out against the requirements of BS EN 45011 and relates to zero- or low-carbon heat and power technologies, certifying renewable energy technologies, microgeneration products and installers.

This certification is also accompanied by factory production control audits that verify continuous manufacturing processes.

Other types of certification: Environmental Profile: defines the cradle to grave stages of a specific product or component over a period of life, typically 60 years.

Factory Production Control (FPC): a certificate that demonstrates the manufacturer follows, and their manufacturing process meets, the requirements of a prescribed standard for a specific product type or range.

BBA HAPAS certificate: HAPAS (Highways Authority Product Approval Scheme) is for products and systems used within the highways industry. The approval process verifies them against the requirements of Highways England and its Document Manual for Roads and Bridges. Examples of products that can apply for this type of certification are asphalt, bitumen, materials used for high-friction surfaces, pavements etc.

Similarly, civil engineering products such as retaining walls, geogrids, drainage products, soil reinforcement etc. can apply for HAPAS certification.

European Technical Assessment (ETAs): a third-party certification scheme that allows products and systems to be placed on the European market bearing the CE Mark.

ETAs are granted for products and systems that do not fall under a harmonised standard. Obtaining an ETA requires assessment against a European Assessment Document (EAD). ETAs, alongside the standardised CE Marking process, demonstrate that products and/or systems meet a minimum set of performance criteria and any product of the same type from within the EU can be comparable by applying the exact assessment method.

Certificate of Conformity (CoC) or Certificate of Constancy of Performance (CoP): both relate to CE Marking. A CoC is assessed against a non-harmonised standard and a CoP against a harmonised standard. Both schemes demonstrate that products meet a minimum set of criteria as defined in the relevant standard and both are generally accompanied by a factory production control scheme which covers continuous annual surveillance of the manufacturing process. However, depending upon the AVCP, the surveillance may be carried out by the same notified body that issues the certification.

ISO 14001 Environmental Management System (EMS): an assessment of the system in practice or the manufacturer’s demonstration of the system in accordance with the requirements of the BS EN 14001.

ISO 18001( OHSAS): this assesses a manufacturer’s compliance against BS EN 18001 and is directed at verifying health and safety systems in place.

Conclusion BBA Certification is a means of demonstrating that products and systems meet specific and set requirements for them to be placed on the market with an intended use.This is backed up by a consistent method of manufacturing and auditing of the manufacturing process.

â–

UK and recognised in some other locations around the world, including the Middle East and China. This type of certification can be obtained for any type of construction product and system whether covered by an existing harmonised standard or not.

ISO 9001 Quality Management Systems (QMS): demonstrates that the manufacturer has in place a quality control system for the management of day-to-day activities involving manufacturing, control checks, authorised personnel, training, complaints processes etc. that define the operational activities of the manufacturer in question.

www.bbacerts.co.uk

Find this issue plus much more on the fc&a app and fca-magazine.com

33

Acoustics

Acoustically optimised pipework – why it’s music to the ears Is a reluctance to move away from traditional materials still holding us back when it comes to material selection for key products such as acoustically optimised drainage pipes and fittings? Sophie Weston, Channel Marketing Manager at Geberit, looks at the properties of four key materials used for drainage pipes and fittings and asks what learnings we can gain from the European market.

F

aced with the challenge of balancing increasingly stringent efficiency targets with eversqueezed project budgets, it is inevitable that some systems within the building will be repackaged again and again within new project specifications, because they work at the right cost, without impacting efficiency. But what if there is a better solution? What if this inertia is preventing enhanced acoustic performance, preventing installation efficiencies and costs savings from being achieved?

One such example is the soil and waste drainage system – clearly a critical part of any

34

building, and one in which failure could be costly, disruptive and unpleasant for property owners, operators and users.Yet, despite continued innovation and development of materials, many specifiers still stick to the material they used in the last project.

Each material choice comes with its own advantages and disadvantages, but before I explore the merits of four specific materials in more detail, it is important to consider the demands of drainage pipes – and how this will impact specification.

Effective drainage specification There are the obvious considerations, like acoustic performance, flexibility

Find this issue plus much more on the fc&a app and fca-magazine.com

of installation, lifespan of the pipe and cost, which encompasses both the material cost and installation cost.

Pipes can be connected using either mechanical clamps, push fitting, solvent welding, butt welding or electrofusion welding, depending on the specifier’s material of choice.

We must also consider the smoothness of the pipe bore and the hydrophobicity of the inner pipe – how well it repels water and, therefore, avoids blockages. For metallic pipes, we must factor in susceptibility to corrosion, including whether any coatings are required.

Acoustics

Sophie Weston is Channel Marketing Manager at Geberit

Cast-iron credentials Cast-iron is an alloy of iron and carbon that provides intrinsic acoustic properties, as the material is both dense and thick, preventing air transmission.

However, cast-iron is more expensive to purchase and install when compared with plastic alternatives.

As an iron-based material, it is susceptible to corrosion; whilst modern cast-iron pipes have more advanced coatings, many older buildings are inevitably facing corrosion issues after 40 or 50 years of service from their original drainage systems.

Most significantly, cast-iron pipes are also more likely to build-up depositions than a plastic pipe due to the roughness of the pipe bore. A new cast-iron would typically offer a roughness value (the relative roughness of a pipe against the size of its diameter) of 0.26mm, compared to 0.0015mm or below for plastic alternatives.

Through decades of constant use, this surface roughness will gradually worsen, and deposits will start to grip to pitting in the pipe bore. Even with regular cleaning and maintenance programmes in place, this can lead to serious blockages and clogging with cast-iron, which will eventually cause leaks if left untreated.

A shift towards HDPE Offering a viable alternative to cast-iron, HDPE is becoming an increasingly popular material for drainage pipes and fittings in commercial buildings.

HDPE combines the lightweight flexibility and installation benefits of plastic pipes with the robust, durable properties required for commercial applications. Although HDPE is not the lowest-cost material, the initial investment can often be outweighed by reduced maintenance costs and extended system lifecycle – not to mention the peace of mind that comes with a strong and reliable welded solution.

HDPE pipes have a smooth bore which is maintained throughout their lifetime, helping to repel any waste that might attach to the inside, and they are reasonably hydrophobic – the interior of a HDPE pipe can often be cleaned thoroughly simply by flushing the toilet or running the tap.

It is also a chemically-inert material and insensitive to high water temperatures, able to withstand hot water up to 90°C and even boiling water, unlike PVC which has an upper limit of 75°C.This is particularly important in applications such as hospitals due to the nature of waste deposited through the drainage system.

PVC – the old favourite Unlike cast-iron, PVC does not provide strong acoustic performance, so lagging is often required with extra time and cost implication. PVC is also a relatively brittle material, particularly in cold weather. It is not uncommon with commercial applications for PVC drainage to be installed, only to be damaged later by subsequent contractors.This can add unforeseen project costs.

However, currently around 75% of soil and waste pipes and fittings sold in the UK are made from PVC, which is lightweight, and easy to attach to walls. Like any plastic pipe, it also has a smooth bore, so is less likely to experience clogging from a build-up of deposits in the same way as cast-iron.

Enhanced polypropylene composite The fourth option is relatively new to the UK market but is the latest demonstration of the UK building products market taking the lead from European product development.

Enhanced polypropylene composite is a proven material, used for many years on the continent and now finally delivering benefits to UK specifiers, engineers and installers too.

Geberit Silent-PP is made from mineral reinforced polypropylene, improving the physical properties of the material and achieving firstclass acoustics optimisation, effectively reducing the natural vibrations and noise.

Crucially, it is comparative in price to PVC pipes and fittings, which makes it a fantastic choice for acoustically-sensitive applications such as hospitals and hotels. In fact, enhanced polypropylene even has the ability to provide an opportunity to deliver overall project cost savings compared to lagged PVC by reducing or removing the need for lagging on some projects.

Be open to innovation Ultimately, the choice of material for waste drainage pipes and fittings will come down to a number of considerations, but the key takeaway is to not rule out different or new acoustically optimised materials.

■

Now, let us examine four material options for soil and waste drainage systems in more detail; cast-iron and HDPE (high-density polyethylene), commonly used for higher-value specification projects, then PVC (polyvinyl chloride) and enhanced polypropylene composite, offering a lower-cost alternative.

www.geberit.co.uk

Find this issue plus much more on the fc&a app and fca-magazine.com

35

Build Focus: Passivhaus

High standards: achieving the Passivhaus accreditation Over 30,000 buildings worldwide are accredited to the Passivhaus standard, with that figure continuing to rise as the global pressure to create energy-efficient buildings increases. Here Nicolas Tye, Director at Nicolas Tye Architects, shares his insight into the approach architects can take when designing and building Passivhaus-accredited buildings for both the residential and commercial sectors, particularly with regard to the importance of rooflights.

36

authority environment, such as schools and other commercial buildings, to be built to the Passivhaus standard. Of the residential projects, there’s an interesting divide between those who are striving to officially achieve the Passivhaus standard and those who are simply influenced by the practice and are wanting to create a thermally-efficient home without having to go through the procedure of an official accreditation.

This is indicative of the positive impact the Passivhaus standard is having on both Europe and specifically the UK, as homeowners and local authorities are increasingly looking to construct buildings led by ecological designs to provide cleaner air inside. As the Passivhaus standard supports the construction of entirely energy-efficient buildings that minimise ‘heating demand’ by using energy sources from inside the

Find this issue plus much more on the fc&a app and fca-magazine.com

property, such as the body heat from residents or solar heat that enters through windows, it eliminates the traditional requirement for heating and manual ventilation systems.This dramatically reduces energy use and carbon emissions, which subsequently decreases energy costs, whilst also supporting the building’s ongoing health and overall indoor air quality.

To achieve a Passivhaus-accredited build, an alternative approach must be taken with regard to the building’s overall design, reconsidering the quality and performance of the building components specified. There are five main areas that architects should consider when undertaking a Passivhaus build: airtightness, thermal bridge-free design, thermal insulation, Passivhaus windows and adequate ventilation with heat recovery.

t

F

ounded in the early 1990s in Germany by the Passive House Institute (PHI), the Passivhaus standard is a construction concept that aims to significantly reduce a building’s ecological footprint, whilst also ensuring the property is comfortable and affordable.

Initially considered a ‘trend’, the Passivhaus standard has evolved into an industry-leading standard, with my architectural practice, along with many others across Europe, seeing an increase in interest for both private and public buildings where the primary design influence is for the construction to be as environmentally-friendly as possible.

Whilst we originally received requests for one-off private dwellings looking to achieve the Passivhaus standard to primarily cut heating bills, there has been a significant influx in recent years for projects within the local

OAK FRAMED GARAGE KITS 47 Standard Designs

CH1G £2,395

CH2G £3,295

CH4HA £8,190 CH3B £5,375

www.roundwood.com Tel: 0800 328 3847

Nationwide Sub-Contractors Required (Groundworks, Assembly & Roofing) In the first instance please e-mail jason@roundwood.com

Round Wood | Newick Lane | Mayfield | East Sussex | TN20 6RG

OAK FRAMED BUILDINGS | BEAMS & SLEEPERS | JOINERY | CEDAR SHINGLES | STADDLE STONES QUALITY DECKING & CLADDING |OAK & WALNUT FLOORING | HOME & GARDEN FEATURES

the world leader in timber preservation technology orld leader in timber preservation technology the world leader in timber preservation technology

proven leach resistant fire protection e proven leach resistant fire protection the the proven leach resistant fire protection treatment for timber and shingles treatment for timber and shingles treatment for timber and shingles performance for exterior timber anced performance for exterior timberenhanced enhanced performance for exterior timber FOR MORE INFORMATION FOR MORE INFORMATION Visit: www.kopperspc.eu

Call: +44 (0)1628 486644 Protim Solignum Limited, Fieldhouse Lane Marlow, otim Solignum Limited, Fieldhouse Lane Marlow, Visit: www.kopperspc.eu Call: +44 (0)1628 (0)1628 476757 486644 Protim Solignum Limited, Email: kpc@koppers.eu Fax: +44 Buckinghamshire SL7 1LS Fieldhouse Lane Marlow,

by Appointment to ckinghamshire SL7 1LS Her Majesty The as Queen Email: kpc@koppers.eu (0)1628 SL7Trademark 1LS of *Registered Trademarks of Koppers Performance Chemicals Inc. ProtimFax: Solignum+44 Limited is a Koppers476757 company trades Koppers PerformanceBuckinghamshire Chemicals. Koppers is a registered micals. Koppers is a registered Trademark of

Of Wood Preservatives Koppers Delware, Inc. All products are produced by independently owned and operated woodManufacturers processing facilities.

All other trademarks are trademarks of their respective owners. marks of their respective owners.*Registered Trademarks of Koppers Performance Chemicals Inc. Protim Solignum Limited is a Koppers company Protim Solignum trades as Ltd Koppers Performance Chemicals. Koppers is a registered Trademark of Registered England - Reg. 3037845 Marlow, Buckinghamshire Koppers Delware, Inc. All products are produced by independently owned and operated wood processing facilities.

All other trademarks are trademarks of their respective owners.

Registered England - Reg. 3037845

reservation technology

by Appointment to Her Majesty The Queen

by Appointment to Manufacturers Of Wood Preservatives Her Majesty The Queen Protim Solignum Ltd Manufacturers Of Wood Preservatives Marlow, Buckinghamshire Protim Solignum Ltd Marlow, Buckinghamshire

37 Find this issue plus much more on the fc&a app and fca-magazine.com the world leader in timber preservation technology

Build Focus: Passivhaus

■

In response to the building’s envelope, focusing on the Passivhaus windows section, in particular, the PHI outlines that the recommended maximum U-values for walls, floors and roofs is 0.15W/m2K.With regard to roofs, all building materials must offer maximum energy efficiency, whilst also diminishing the loss of heat. As the roof is one of the main areas where heat is lost due to radiation, the addition of rooflights can play an important part in maximising energy efficiency.

The PHI states that the highest U-value for complete window installations remains at 0.85W/m2K, requiring the specification of rooflights that do not exceed this maximum U-value.To achieve this, we work with manufacturers such as Roof Maker, who offer a Passivhaus-accredited fixed flat rooflight with a U-value of 0.2W/m2K. Specifying products such as the above ensures we can be confident we are well within the PHI’s requirements to achieve complete energy and solar gain efficiencies, without compromising on the aesthetics and overall design of the space.

However, the installation of windows, doors and rooflights can often be where the greatest level of energy is expected to be lost, due to the glazing present, along with the breaks between the frame and the glass where there is the opportunity for heat to escape.Therefore, the frames must be well-insulated and fitted with low-E glazing filled with argon or krypton to prevent heat transfer. For most cool-temperate climates, this requires a U-value of 0.80W/m2K or less, with G-values around 50%.

The inclusion of rooflights within the ceiling and roof design of a Passivhaus building can not only support and increase the thermal performance of the property but also ensure natural light is maximised for additional interior comfort, both physical and thermal.

For architects, it’s important to find that balance between establishing an ecological design that doesn’t impede on personality or creativity, whilst also specifying the highest standard but most affordable products. Following the five design principles offers a strong blueprint with which to begin, to ensure all key elements are not only adhered to but seamlessly integrated into the build itself.

As the PHI states, Passivhaus is a “building standard that is truly energy-efficient, comfortable, affordable and ecological at the same time”, architects can revolutionise the expectations and realisations of both residential and commercial constructions to pave the way for a more energy-efficient future.

www.roof-maker.co.uk

38

Find this issue plus much more on the fc&a app and fca-magazine.com

www.deltamembranes.com 01992 523 523

MANUFACTURER | DESIGN | SOLUTION Waterproofing Types A,B & C Ground Gas Protection Inspiration & Innovation Flood Resilience Pumps, Sumps & Drainage Sustainability CPD Provider Training

Delta Membrane Systems Limited provides a full range of waterproofing solutions suitable for all new, retrofit and refurbishment construction. With over 125 years of manufacturing experience Delta is an impeccable partner on every project. Our skills have been mastered through experience in the waterproofing industry. Delta’s trusted Technical Team will offer assistance from concept to completion.

Our hands on approach and knowledge is what sets us apart.

P B S ARY

LIBR

sustainable-buildingproducts.com

sustainable-buildingproducts.com Your essential new reference for sustainable building product information web | mobile | tablet

Find this issue plus much more on the fc&a app and fca-magazine.com

39

Building Envelope: RCI

Fact File: Project: The Macallan Distillery, Aberlour, Scotland Architect: Rogers Stirk Harbour + Partners, London General contractor: Robertson Construction Group Roofing contractor: Topek Northern

World-class green roof showcasing the art of waterproofing

Duration of construction: 2015-2018

Scotland – synonymous with pristine landscape, harsh weather and, of course, whisky. Whisky has been distilled in Scotland for hundreds of years.

Insulation: KINGSPAN Tr27

T

he Macallan Distillery on the lower reaches of the Spey has been making whisky since 1824, making it one of the oldest licensed distilleries in Scotland. Among connoisseurs, the Macallan single malt whisky is regarded as a prized possession. It is no surprise that in 2014 the Macallan brand created a world record for the most expensive whisky bottle ever sold in an auction.

In 2012, the Edrington Group, owner of Macallan since 1999, announced an extension of the existing distillery and a new visitor centre.

In an international architectural competition to design the new building, London-based Rogers Stirk Harbour + Partners’ proposal was chosen.The firm’s design is a tribute to the beautiful Scottish landscape and whisky production in Scotland.

The production area has 21 massive fermenters made from stainless steel, and 36 copper stilts, capable of producing about 15 million litres of spirit each year.

Only when the spirit has been put into oak casks and matured for a minimum of three years can it be called whisky.

40

Find this issue plus much more on the fc&a app and fca-magazine.com

Launch: 2nd June 2018 Vapour control: ALUTRIX 600 Expansion movement joints: RESIFLEX SK Waterproofing: RESITRIX SKw Roofing products: CCM Insulation Adhesive, CCM FG35 Primer The overall design of the distillery is a masterpiece in itself. The building has a very inclusive design, but few would argue that one of the main design features is the roof of the building. The imposing dome roof – one of the largest green roofs in Europe – blends seamlessly with the surrounding landscape.

The roof The dome roof, with an area of 12,300m², is designed as an expanding green roof which is supported on a steel and wooden construction. The green roof covers 12,300m².

The eaves of the roof are located 13m above ground level. The roof has in total of five domes with a cantilevered canopy. Four of the domes are 18m high, and the fifth one is the tallest at 27m.The biggest dome envelopes an exhibition area, a visitor centre with a cafe, shop and a bar.

The Macallan project was an ambitious project from the onset. The roof is designed to cater to the vapour created by whisky distillation. As a result, the roof panels are designed to move with the expansion and contraction created by these movements. The roofing system was specified with a bitumen system and the waterproofing layer was designed to be laid over timber component.

Later in the project, the system was rejected because the bitumen-based system could not accommodate the extremes of movement required and couldn’t comply with the criteria.

Building Envelope: RCI KEY:

9 10 1

2

7

3 6 4

5

Carlisle Construction Materials (Carlisle CM) proposed RESITRIX hybrid EPDM membrane and roofing system. By composition, RESITRIX’s hybrid EPDM is flexible and a long-lasting membrane with root-resistant qualities and can not only accommodate the expansion but would also keep the building watertight for decades.

Tasked to find a viable solution, Carlisle’s technical team produced a scale working model of the roofing system to reassure the contractor and architects.

“The deciding reason for using Carlisle roofing system was the fact it allowed for expansion without compromising on the waterproofing of the building. All the components within the system were tested and able to accommodate the expansion,” commented Stewart Orton, Carlisle’s Product Technical Manager.

“We took on the challenge and delivered. All the teams worked tirelessly, and as a result, the roof was completed on schedule,” added John Whittaker, Carlisle’s Head of Technical.

Macallan distillery has a complicated wooden roof construction with a cantilevered canopy forming an external covered walkway.

“For this complex project, we needed a new approach and chose a parametric design to realise the complex geometry,” says Erich Wiesner, Owner and Managing Director of WIEHAG. The roof is made from 1800 beams all precisely cut to fit together without screws

or glues. A further 2700 roof elements and 380,000 individual components were made by component manufacturer WIEHAG in its factory in Austria and transported to site.

As a supporting structure for the roof, a tubular steel sub-frame, a sub-structure was designed. On to this sub-structure, the raised octagon wooden structure is placed.

The framework of the rectangular roof elements are made of solid timber, and the underside of the timber structure is made from a 15mm laminated veneer.

Waterproofing The individual roof panels were formed as a sectional cassette, each cassette was made in an unequal triangle shape to form the dome shape required. Each cassette was fixed with one pivoted anchor which allowed the panel to move independently of the surrounding panels. ALUTRIX 600 vapour barrier membrane was used as a full vapour check to prevent the steam and vapours from the whisky production, which can cause condensation problems within the roof cavity.

The movement of these panels was overcome by using RESIFLEX SK expansion strips, which allowed the movement of up to 40mm in every direction bonded to the joints of the panels to complete the air seal. 150mmthick insulation was bonded directly to the ALUTRIX 600 using FG35, Carlisle’s insulation adhesive, and the expansion gaps were completed with a system developed by Carlisle’s technical team.

©Rogers Stirk Harbour + Partners

8

01. The roof, an engineered form, is a manipulated ground plain that expresses the production modules beneath with an accentuated roof above the visitor centre. This accentuation in the roofscape identifies the visitor centre as the point of entry and provides the greatest volumetric space above the bar.

The ‘green’ meadow grass surface is to be integrated into the landscape of the surrounding meadow and will incorporate rooflights and vents to the spaces beneath.

02. The rear access road and tank farm assembly.

The position of the supply and extract process vessels within the depressed access road and removes the otherwise dominant impact of a tank farm on the landscape.

03. A boiler house is integrated into the rear walls to the south of the facility, forming a vertical marker and counterpoint to the horizontal nature of the new facility.

04. Flexible exhibition and gallery space is positioned to the southern end of the visitor centre. This forms an adjacent facility to the visitor bar and benefits from views out to the landscape.

05. Entrance approach 06. Visitor centre 07. 3no. Still houses 08. Mash house 09. Service road 10. Tank farm

The final waterproofing layer of the roof construction was completed with RESITRIX SKW full bond hybrid EPDM adhered to the insulation and heat welded at junctions and laps.

The highest dome posed a challenge with a 45° slope at its steepest section.

The steep pitches of the domes were easily walkable due to the slip resistance of the RESITRIX membranes.

In 2017, the Macallan Distillery project scooped two awards at the UK Roofing Awards hosted by the National Federation of Roofing Contractors (NFRC). Carlisle CM won the ‘Single Ply Roofing Award’. The project also won the ‘Green Roofing Award’.

Projects were judged on several categories including workmanship, safety, complexity and the challenges they overcame.

“We are so proud to win the award in the Single Ply Roofing category but what is equally impressive is that the same project also won an award in the Green Roof category, which is a testimony of the far-reaching benefits of our products and especially our hybrid EPDM,” stated Duncan Kirkwood, Managing Director of Carlisle Carlisle CM. Later in 2017 the project also won the ‘Best New Construction Award’ at the Single Ply Roofing Association (SPRA) Awards.

■

MACALLAN DISTILLERY SECTION

www.carlisleconstructionmaterials.com

Find this issue plus much more on the fc&a app and fca-magazine.com

41

Waterproofing

Evolving and improving waterproofing standards and practices In construction, waterproofing is a process of making a building or structure waterproof or water-resistant, so it remains protected from the effects of water penetration or enables the ingress of water within a specified or controlled manner.

W

aterproofing offers structural integrity, the ability of the structure to retain its strength, function and shape, without failure when subjected to the loads imposed throughout the structure’s service life.

Structural waterproofing is a fundamental aspect of the build process.

Structural waterproofing is a relatively new terminology; it covers areas such as tunnelling, basements, reservoirs, top decks and balconies, podium decks, green roofs and car parks; to name a few. The basic principle for structural waterproofing is waterproofing the structure.

42

Historically basement waterproofing was divided into two key areas: Tanking A terminology often used for waterproofing methods used where the below-ground structure sits within the water table continuously or periodically. Hydrostatic pressure is the pressure that is exerted by a fluid at equilibrium at a given point within the ground due to the force of gravity.

Hydrostatic pressure increases in proportion to the depth measured from the surface because of the increasing weight of fluid exerting downward force from above.

Hydrostatic pressure likely to be imposed on

Find this issue plus much more on the fc&a app and fca-magazine.com

the structure requires consideration to the full encapsulation of the basement structure in a tanking membrane, which is installed under the slab and to the structural walls.The positive or negative side may be considered.

Tanking (in current-day terminology) A terminology for waterproofing methods applied using typically liquid-applied, sheetbonded or substrate reactive components such as migratory systems.

Damp-proofing A terminology for waterproofing methods used where the water table is lower than the structure, and there is good free-draining fill.

The damp-proof membrane deals with the shedding of water and the ingress of water vapour only – with no hydrostatic pressure – in above-ground scenarios.

From the late 1990s, the construction industry saw technological advances in waterproofing systems, solutions and materials available and the inclusion of a new set of British Standards.

British Standard BS 8102:2009 BS 8102:2009 (Code of practice for protection of below-ground structures against water from the ground) is the standard that has been developed to give recommendations and provides guidance on methods of dealing with and preventing the entry of water from surrounding ground into a structure below ground-level.

Waterproofing

BS 8102:2009 sets out various considerations to include the three ‘Types’ or ‘Forms’ of waterproofing construction.These systems are categorised as Types A, B and C.

Type A Type A is defined as ‘barrier protection’.

A material is used to offer a barrier to the passage of water. A barrier protection which physically holds water back on either the positive side of a below-ground level structure (externally), the negative sides (internally) or sandwiched into the construction. Cementitious coatings, bituminous coatings or flexible sheet membranes are categorised within Type A ‘barrier protection’.

Type B Type B is defined as ‘structurally integral protection’. Type B protection applies that the structure itself is constructed as an integral water-resistant shell. A concrete structure built inclusive of watertight concrete admixtures, hydrophilic strips/waterbars (passive or active).

When considering and/or specifying a Type B integral system, a superior knowledge and understanding of concrete construction is required to meet BS 8102:2009 specifications. A further design consideration and robust strategy is to design the concrete in accordance with BS EN:1992 Euro Code 3.

There are two main types of integral waterproofing systems: the hydrophilic and the hydrophobic. A hydrophilic system typically uses a crystallisation technology that replaces the water in the concrete with insoluble crystals. Hydrophobic systems use fatty acids to block pores within the concrete, preventing water passage.

Type C Type C is defined as ‘drained protection’ and functions by diverting a passage of water away from the structure (which is usually collected into a submersible pump). A drained cavity system collects and manages any moisture which breaches the integrity of the structure by channelling, collecting and discharging such free water via a suitable evacuation point.

A Type C waterproofing system will not increase or exert water pressure on a structure nor alter the dynamics of a structure.

Structural waterproofing Waterproofing systems have become sophisticated and are a very specialised area.

One of the leading causes of water damage to building structures and of personal injury is the use of improper products, used for the wrong application.

Waterproof is a loose term, used for numerous products. Each product has a very specific area of application. Failure of following manufacturer specifications and installation procedures can cause severe consequences when the systems fail.

How to avoid failed waterproofing systems Waterproofing failures can be expensive and disruptive. Waterproofing makes up between 1 and 2% of the total cost of

A waterproofing design specialist provides expertise in structural waterproofing. A waterproofing design specialist should have: CSSW as a minimum standard of qualification Be able to list the principal considerations for a robust waterproofing design Offer knowledge on waterproofing systems available An in-depth understanding of BS 8102:2009 and its requirements Desktop study and risk assessment knowledge – these should form part of any designer’s report and waterproofing design An understanding of sources of water (such as how it flows through the soil and interacts with the structures) Structural knowledge Knowledge of ground gases Geotechnical knowledge (to be able to understand the implications of a soil report) The ability to produce a design report, method statements and waterproof design drawings.

Delta Membrane Systems offers CSSW training and examinations at its fully functional training facilities in Epping, Essex, hosted by the PCA. All of Delta’s technical team are CSSW-qualified surveyors and are members of the Waterproofing Design Register.

■

It covers the use of: a) Waterproofing barrier materials applied to the structure b) Structurally integral watertight construction c) Drained cavity construction.

construction but accounts for huge costs in remediation. While prevention is the obvious first choice for waterproofing success, there are occasions of error in design, during construction and throughout operation. Water infiltration will not fix itself. Inexperienced attempts at treating systems of waterproofing failure will only serve to trap or redirect moisture.

British Standard 8102:2009 (Code of practice for protection of below ground structures against water from the Ground [BS 8102:2009]) recommends that every design team/waterproofing project incorporates a waterproofing design specialist.

As set out in Section 4.2 of BS 8102:2009 under the heading ‘Design Team’, the code states:“A waterproofing specialist should be included as part of the design team so that an integrated waterproofing solution is created.

The waterproofing specialist should: i) Be suitably experienced ii) Be capable of devising solutions that accommodate the various project constraints and needs iii) Provide the design team with information and guidance that assists with and influences the design, installation and future maintenance of the waterproofed structure.”

www.deltamembranes.com

Find this issue plus much more on the fc&a app and fca-magazine.com

43

Glass & Glazing

Variations on an original theme (park) Today, Alton Towers is best known as a theme park resort, home to Nemesis, Oblivion, The Smiler and new for 2018, Wicker Man. Yet, before the Corkscrew revolutionised the park back in 1980, the estate had been the property and home of the Talbots, Earls of Shrewsbury, for 700 years.

At the heart of the park sits a reminder of this heritage, the iconic Towers, one of the greatest examples of Gothic Revival architecture in Britain.

T

hroughout its history, the Towers has endured endless improvements, renaming and extensive remodelling by numerous earls.

The transformation of the once modest, Alveton Lodge began around 1800 with works commissioned by the 15th and later, the 16th Earls of Shrewsbury. It was during this 50 years of intense reconstruction that the Lodge changed name for the first time, becoming Alton Abbey, a reflection of the style and scale of the developments.

Gothic Revival conservatory One of the most architecturally important works during this building phase was the conservatory.The Gothic transformation of Alveton Lodge into Alton Abbey saw great many romantic and fanciful additions to

44

the house. Architect Thomas Hopper was responsible for the conservatory – a dramatic expanse of glass, iron, wood as well as local building stone.

Dated around 1815 to 1817, the conservatory is a significant feature of the south side of the house. Built in the Gothic style, with a glazed fan-vaulted ceiling believed to be inspired by the chapel at Westminster Abbey, the conservatory would become a key feature for visitors; filled with exotic plants, flowers and birds.

The conservatory was built of stone, with iron-framed windows and a glazed timber roof. It comprised three elements, two long glasshouses linked by an octagon with Gothic windows. A fourth element was added later, in 1824, to connect the conservatory with the new Octagon Gallery.

Find this issue plus much more on the fc&a app and fca-magazine.com

The birth of the Towers

However, after the death of the 15th Earl in the late 1820s, the house underwent its largest development, effectively doubling the size of the building. It was at this time that the Abbey became known as the Towers, as the architecture moved away from the monastic style of the early 1800s and instead, adopted a more Medieval appearance. This incarnation is now familiar to millions of tourists around the world as the centrepiece of Alton Towers Resort.

New era Fast-forward 100 years and the estate was sold to a group of local businessmen.The outbreak of the Second World War saw the Towers and land requisitioned as an officer cadet training camp.They remained a possession of the Ministry of Defence until the mid-1950s.

After this, the estate set about re-establishing itself as a popular tourist attraction throughout the 1960s and 1970s, before the revolutionary arrival of the Corkscrew ride in 1980.

Conservatory conservation As part of its commitment to preserving the site’s historical features, the resort commissioned the restoration of the house conservatory in late 2010, including the reinstatement of the whole roof, using a timber structure with aluminium glazing bars.

As the buildings were listed, the conservation officer was looking for sections which reflected the original form of the roof lanterns, as far as was practicable. It was proposed that the lanterns were constructed in powdercoated aluminium with single glazing.

Glass & Glazing

After a stringent tender process and submission of section details and examples of similar lanterns to the planning officer, Howells Patent Glazing (Howells) was appointed manufacturer and supplier of the roof lanterns. Working alongside Staffordshire-based contractor, Seddon Construction, Howells was tasked with producing and installing the roof in just four months, completing the contract prior to the new tourist season.

To meet the slim, pencil-line requirements of English Heritage, the patent glazing specialist adapted its popular HGR 1 rafter bar to create a bespoke glazing system. The 37.5mm slimline aluminium glazing bars sit on the wooden rafters so the view from below is timber, as it would have been originally. To complement the mullions, crestings were designed specifically for the conservatory featuring fleur-de-lis. These were profile cut from 6mm aluminium. The aluminium bars and crestings were powder coated in RAL 9010, an off-white satin finish.

That was seven years ago; since then the conservatory has been a magnificent spectacle for the many thousands of visitors passing through the Staffordshire tourist attraction. David Rhodes, Head of Buildings and Estate at Alton Towers, comments: “With regard to the roof, we have had no issues over the past seven years, and it is performing as expected.”

■

Future-proof reconstruction

www.howellsglazing.co.uk

Find this issue plus much more on the fc&a app and fca-magazine.com

45

Floorcoverings

2018 and 2019’s key flooring trends Human-centred design isn’t a new concept, but with a growing body of research highlighting its important role in boosting workplace productivity, it has become a key consideration for architects and interior designers, writes Laura Light, Interface Concept Design Team Leader.

A

rguably, the benchmark of a successful office space nowadays is how it meets the wants and needs of end-users. Naturally, this has had a significant impact on the flooring trends we’ve seen emerge in 2018, and it will continue to do so throughout 2019.

However, creating a space which is optimised to promote employee wellbeing involves much more than simply removing barriers, such as relocating a noisy printer or replacing uncomfortable seating.There are significant opportunities to drive positive improvements in productivity and performance by focusing not only on reducing the negative but also by actively creating positive and inspiring spaces.

Inevitably, this is a trend that business leaders are tuning in to and means they are under increasing pressure to provide ‘experiencedriven’ spaces which are also flexible, adaptable and nurture creativity. This might involve having a meditation area, coffee bar or an area for collaborative working – but the point is that we now require the office space to act as a multipurpose environment.

46

How this works in practice when it comes to design all hinges on the key concept of flexibility.

We’ve seen a real move this year towards using flooring to create different zones which fulfil different functions. As a concept design team, we are getting more involved in coworking and learning spaces which require more diverse landscapes across the floor.This can be achieved by mixing colours and textures and smoothly transitioning from hard to soft flooring.

Puzzling shapes Interconnected geometric shapes within flooring provide one way of creating these diverse patterns and are a great way of catching a person’s attention as they walk in a room.The beauty of these shapes, which we’ve seen more and more of this year, is that they can be used across a small area to mark out a breakout or lunch space, or they can be used more widely to create bold, dramatic patterns that really make a room stand out. They also bring an additional dimension to flooring, elevating it from a flat surface to something much more engaging and interesting.

Find this issue plus much more on the fc&a app and fca-magazine.com

Perfect imperfections However, this bold approach isn’t for everyone. As humans, we’re naturally drawn to the imperfections we find in the world around us. In order to translate this into flooring design, we’ve seen an increase in the use of artisan and handmade products which offer a variety of textures and patterns.These surfaces are more tactile and create a sense of warmth and homeliness in a space which could otherwise appear cold and clinical. By mixing these subtle textures, you can also create patterns within a floor to demarcate different zones and areas within a building which have different uses.

Colour is key No analysis of trends would be complete without a delve into the world of colour.

This year we’ve seen real variety, ranging from monochrome contrasts to muted tones and faded colour flow. Using a monochromatic scheme allows businesses to add contrast to a space, while maintaining an overall air of simplicity and calm.

Floorcoverings

This minimalist approach can also be achieved by toning down the colour palette and opting for something more low-key.

Each year, there are distinct influences when it comes to colour trends. A number of big brands will announce their ‘colours of the year’, which interiors will then be shaped around, and magazines will curate collections of furniture, fabrics and flooring which provide inspiration for future trends.

Of course, these colours can also be used in a very different way, and next year we expect to see even more deliberate clashing of colours and textures to create engaging and inspiring spaces.

is well underway and due to be completed in 2020.There’s no question that biophilic design is here to stay.

One thing is certainly clear from the trends we’ve seen emerging this year and those that will continue to develop throughout 2019; they are focused on people.Without considering the impact of colours, patterns, textures and light on people, a designer will struggle to create a positive space which makes end-users happier and healthier.

■

Finally, there’s one key trend which just isn’t going away, and we expect it to continue to grow in 2019 – and that is biophilic design.This takes us back to the need to create spaces which really benefit end-users, and that applies across the board to offices, hotels, restaurants and, of course, our homes. At Interface, we’ve championed biophilic design for a long time and strongly believe in the health and wellbeing benefits of reconnecting people with nature through design. Although the principles remain the same, the way it is being translated into spaces is evolving. For example, we are seeing natural patterns being used on a larger scale, with enhanced colours and integrated technology.The true impact of this approach will be quantified for the first time through BRE’s Biophilic Office research project which

■

Building on biophilic design

www.interface.com

Find this issue plus much more on the fc&a app and fca-magazine.com

47

CPDs & Seminars

Kährs launches RIBA-approved CPD

SIMONSWERK launches Specification of Hinges CPD SIMONSWERK’s RIBA-approved CPD on the Specification of Hinges will provide architects with the technical knowledge for specifying the correct hinge for the right application.

Kährs has launched a new RIBA-approved CPD seminar for architects, designers and trade professionals. The seminar, titled ‘Engineered Wood Flooring’, educates on the construction of engineered wood, and how the product can be effectively specified within both domestic and commercial projects. Environmental accreditations, installation methods and examples of references are covered within the 40-minute seminar, with complimentary lunch.

Learning aims of the seminar include: what is engineered wood, the installation process, environmental considerations, shaping the design brief, budget considerations, accessories and how to maintain an engineered wood floor. Book your CPD with Kährs via the below website. * sales@kahrs.com

( 02392 453045 8 www.ribacpd.com/kahrs-

uk/4209/overview

T

he presentation offers guidance on door specification, legislation, Building Regulations, fire and safety in use, CE Marking – MANDEC and the Equality Act. SIMONSWERK has over 35 years of experience in the manufacture of high-quality brass, aluminium and stainless steel hinges for doors, windows and conservatories. The company’s ranges include the outstanding fully concealed TECTUS system and the increasingly popular TRITECH solid brass hinge with concealed bearings and load capacity to 160kg.

For further information on SIMONSWERK’s RIBA-approved CPD on the Specification of Hinges or any of the company’s products, please visit the website below. * info@simonswerk.co.uk

( 0121 522 2848 8 www.simonswerk.co.uk

48

Learning could be a lifesaver GEZE UK has revised a piece of lifesaving learning – its popular RIBA-approved CPD on specifying, installing and maintaining ironmongery for fire doors.The 40-minute seminar explains what fire doors are, identifies their various components, how they work, the

Find this issue plus much more on the fc&a app and fca-magazine.com

standards and regulations which surround them and why smoke is so dangerous. It is intended for chartered members of RIBA but is also suitable for facilities managers, property managers and architectural ironmongers and completely updates the 2016 version. It incorporates the latest statistics for England,Wales, Scotland and Northern Ireland, including the number of people that die from smoke inhalation every year. It also highlights the latest regulations. * info.uk@geze.com

( 01543 443000 8 www.geze.co.uk

New RIBA CPD app covers subfloor preparation and adhesive selection F. Ball and Co. has made its RIBA-assessed CPD tutorial available to download as an app.

The tutorial covers all aspects of subfloor preparation, including the varying requirements of different subfloor types, moisture testing and providing effective moisture protection, and the installation of a suitable levelling compound to create a smooth, blemish-free finish.

The CPD module also details how to specify the correct adhesive, taking into account the floorcoverings being installed and the environment in which they will be situated.The tutorial can be completed in one go or in sections until it has been fully completed, upon which a certificate of completion is issued.The tutorial is worth one hour of CPD. * mail@f-ball.co.uk

( 01538 361633 8 www.f-ball.co.uk

.uk k W! 00 .co .u NO 23 ic co R 75 ss ic.

TE 2 la ss EN 0189 olfc lfcla ll eg go Ca w.th the ww @ it info Vis ail Em

Celebrating 27 years offering golfers the chance to play golf regionally, make friends and build profitable relationships.

Enter now and be part of the UK construction industry’s annual national tournament.

GOLF CLASSIC THE CONSTRUCTION INDUSTRY’S NATIONAL TOURNAMENT

We do the matching so you can enjoy playing golf in this famous five round knockout tournament. Share green fees and compete toward a place in the Grand Final at world renowned Ryder Cup venue The Belfry Hotel & Golf Resort.

Finalists enjoy playing free championship course golf, gala prize-giving dinner and overnight stay.

For more information and to enter simply call 01892 752300 visit www.thegolfclassic.co.uk, email info@thegolfclassic.co.uk or fill in and return the entry form below with your £46 entry per two ball team. Entrance closes at the end of February 2019 with the 1st round in March.

ENTER NOW FOR JUST £46 PER TEAM AND LOOK FORWARD TO GREAT GOLF IN 2019!

MEDIA PARTNERS

✁

SIMPLY COMPLETE THIS FORM AND SEND IT WITH YOUR CHEQUE FOR JUST £46 PER TEAM MADE PAYABLE TO ‘THE GOLF CLASSIC’ TO: THE GOLF CLASSIC, FREEPOST SEA12502, TUNBRIDGE WELLS, KENT TN3 9BR. ENTER ONLINE AT www.thegolfclassic.co.uk EMAIL info@thegolfclassic.co.uk OR CALL 01892 752300 FOR DETAILS AND TO ENTER PLAYER 1

PLAYER 2

Name

Name

Company Name

Company Name

Address

Address Postcode

Postcode

Contact Telephone Number

Contact Telephone Number

Email Address

Email Address

Name and Address of Golf Club

Name and Address of Golf Club

Golf Club Postcode

Player 1 Handicap

Golf Club Postcode

Player 2 Handicap

Find this plusandmuch onwww.thegolfclassic.co.uk the fc&a app and fca-magazine.com For fullissue conditions rules ofmore play visit

49

HVAC & Electricals

Stunning 33 Glasshouse Street attracts leading tech giant AET Flexible Space has returned to 33 Glasshouse Street, London, to complete Cat B fit-out works on the second, third and fifth floors for one of the world’s leading tech giants. The stunning 52,000ft2 building has recently undergone full structural reconfiguration and refurbishment, features a Grade II Listed facade and is located in a prominent position looking over Regent Street and Soho.

Space-saving underfloor air conditioning was originally specified for this challenging ‘cut and carve’ project, helping to maximise headroom in the restricted space, creating a floor-to-ceiling height of 3.3m, and large open-plan floor plates for the Cat A space on floors three to seven. The underfloor system also helped to maximise natural light penetration through the deep floor plates. Perimeter heating and cooling would not have been effective, and a ceiling system would have

required a void that would virtually cover the low-level windows.

The CAM-C direct expansion system at 33 Glasshouse Street is served by external heat pumps and provides fully conditioned air via the underfloor plenum using zonal downflow units (CAM). Cool or warm air is then introduced into the workspace via TU4-EC Fantiles, or fan terminal units, which are recessed into the 300mm void.

Working for Modus Workspace, AET engineers carried out additional

fit-out works for the incoming tech giant including the supply and installation of additional Fantiles, return air grilles and underfloor air baffle to cater to the proposed high-density layout and accommodate the additional cooling requirements.

8 www.flexiblespace.com

* lucy@flexiblespace.com ( 01342

310400

New Vitocrossal 200 commercial boiler offers maximum output Viessmann has introduced the Vitocrossal 200, an 800 to 1000kW gas-condensing boiler with an innovative MatriX pre-mix disc burner which sets new standards for commercial boilers. The Vitocrossal 200’s numerous improvements over its predecessor include an extended modulation range of 1:6 for greater efficiency at partial load and low NOx emissions of less than 40mg per kWh, a modular design for easier installation, and significantly smaller dimensions which make it perfectly suited to smaller plant rooms. For heating larger premises, there is a cascade function for up to eight boilers with a total output of 8000kW. The Vitocrossal 200’s footprint is 27% more compact than that of a boiler with a conventional burner. This is because the new disc-shaped MatriX premix gas burner is flatter than a conventional cylindrical burner, and because advances in burner materials have allowed a shorter flame and smaller combustion chamber.

Vortice goes even greener Vortice is striving for a greener tomorrow and is asking its customers to participate. As part of this, the company will be gifting Christmas tree seeds this December. Clean air cannot be taken for granted and as an air expert,Vortice’s mission is to improve the quality of the air that we breathe and to work towards maximum wellbeing in the buildings we inhabit. Assisting in this mission by providing additional trees to improve outdoor air quality, is a long-standing tradition of the company.Trees absorb carbon dioxide as they grow and also help to reduce ozone levels in urban areas. During the process of photosynthesis, trees take in carbon dioxide and produce the oxygen that we breathe. In the same way, houseplants can improve oxygen levels indoors.Their leaves also help to collect dust and debris from the air, allowing the householder to wipe them clean and remove the dirt.

* info-uk@viessmann.com

* technical@vortice.ltd.uk

( 01952 675000 8 www.viessmann.co.uk

( 01283 492949 8 www.vortice.ltd.uk

50

Find this issue plus much more on the fc&a app and fca-magazine.com

Get i

nvolv If yo ed: produ u have a p c ro i-buil t that you’d ject or a d, we li ’d love ke to see you! S in to im edito ply email hear from r@mix our e d e or ad dmediainfo itor at du .c PR m s to your om ailing list.

Search ‘ibuildmagazine’

Subscribe free

to receive your invaluable self-build resource Featuring diverse and inspirational projects alongside the latest news, events and products, i-build is the comprehensive guide for planning, designing, building and decorating individual homes.

www.i-buildmagazine.com/subscriptions

i-build www.i-buildmagazine.com

i-build i-nterior i-scape

The

app

for iPhone, iPad & Android Free download available now BROWSE | SPECIFY | SOURCE | DIGEST The smarter way to access news and products for the sustainable building market.

With its easy-to-navigate format, users can benefit from a variety of useful tools, such as the magazine’s latest issue, digital archive, suppliers and newsbank.

The App is also synced with SBP Library (www.sustainable-buildingproducts.com) providing an essential specification portal.

swipe to see more!

Find this issue plus much more on the fc&a app and fca-magazine.com

‹‹‹

51

Doors & Windows

Georgian townhouse remodelled to meet highest energy performance standards A historic Listed Georgian townhouse in London’s Bloomsbury has been transformed into a comfortable, peaceful and energy-efficient home that approaches Passivhaus EnerPHit standards.

The large single-glazed sash windows were challenging as they represented a significant proportion of the wall area and could not be replaced. The answer was an advanced secondary glazing system from Selectaglaze; but the extremely high levels of insulation required, the aesthetics and the need for working shutters in some rooms demanded a bespoke solution.

Robert Prewett of Prewett Bizley Architects approached Selectaglaze, which was both developing a new sash window design and trialling Pilkington’s Spacia thin vacuum units – which have a centre pane U-value of 1.0. The resulting Series 25 window proved perfect for the project

as it offered high sealing efficiency, a very low U-value and a discreet frame with a specially developed slide catch that allowed shutters to close fully. The house now has airtightness close to one air change per hour at test pressure which demonstrates that the secondary glazing is performing well.

The complexity of the project and the time needed to obtain consents meant that part of the building had to be occupied before the secondary glazing was fitted.

As a result, the owner experienced a change in comfort levels. The difference was remarkable and what was also evident was the almost complete removal of road noise.

8 www.selectaglaze.co.uk

* enquiries@selectaglaze.co.uk ( 01727

©Richard Kiely

GEZE UK takes centre stage for leisure needs

837271

Whether it’s creating a grand entrance or ensuring access for everyone, all leisure venues seeking to attract people through their doors need to strike the perfect balance between aesthetics and functionality. Alongside this can be a long list of specific needs: sustainability, accessibility, security, health and safety, the flow of people around the building, environmental impact or heritage sensitivity. GEZE UK’s new ‘Project Portfolio Leisure’ outlines how some of these considerations have been put into practice within a range of different buildings from a prestigious art gallery, theatres old and modern, to striking landmark visitor attractions.

The brochure highlights the flexibility that GEZE UK’s extensive range of solutions provides as a manufacturer of both manual and automatic door and window control systems. It illustrates how the application of solutions must meet demanding and exacting standards that will help ‘sell’ the venue to visitors while meeting practical requirements for building management.

Much ado about sustainability

* info.uk@geze.com

* irene.smith@rehau.com

( 01543 443000 8 www.geze.co.uk

( 01989 762650 8 www.rehau.uk

52

Find this issue plus much more on the fc&a app and fca-magazine.com

REHAU’s AGILA doors have been installed in 12 affordable homes in Shropshire to provide a warm welcome to housing association tenants moving into the flagship Passivhaus development in Much Wenlock. The Callaughtons Ash scheme has been built on behalf of South Shropshire Housing Association for tenants. The development comprises 12 one-, two- and three-bed Passivhaus homes, with 10 allocated for affordable rent and two for shared ownership. In total, 24 AGILA Passivhaus doors were manufactured for the Much Wenlock project by REHAU authorised partner GRM. Based on the GENEO system, the doors can achieve a possible Ud-value of 0.7W/m2K, ensuring they meet the exceptionally high efficiency standards demanded by the Passivhaus Trust. Created in partnership with supplier Roedenburg, the AGILA Passivhaus doors come in a range of contemporary and stylish designs and can be customised with GRP overlay skins in a range of colours and finishes using either foils or Acryl II colour coating.

Doors & Windows

Spencer Allen, GEZE UK’s National Sales Manager for Window Technology

Smart buildings need smart planning Smart buildings must begin with smart planning and designers must play their part by considering connectivity at the beginning of the design process.

T

hat was the foundation of a talk on ‘Building Better Buildings Through Connectivity’ given by Spencer Allen, GEZE UK’s National Sales Manager for Window Technology, which took place at the Smart Building Show, London.

Placing people at the heart of design, construction, operations and development decisions, will, in turn, create “added value” by boosting productivity and generating cost savings in human resources and building management, he outlined.

Controlling a building’s systems – its heating, lighting, ventilation, air conditioning or other application, will offer improved efficiency, reduction in energy consumption and an extended lifecycle of products used throughout the building.

But the greatest return on investment could be seen by providing better workplaces for its occupiers, he stated.

A staggering 90% of an organisation’s expenditure is spent on its people – by way of salaries, ‘on costs’ and benefits according to Knoll Workplace Research.

This compares with only 10% spent on operations and energy consumption.

“The need to look after our people is evident,” he said. “Maintaining the health and satisfaction of employees will result in a greater return on a significant investment in any organisation’s running costs.”

It is estimated that we spend as much as 90% of our time indoors (source: WELL Building Institute PLC 2015) so indoor space is crucial to our wellbeing.

“Since its launch in 2014, the WELL Building Standard has been integral in highlighting a growing aspiration across the built environment to develop spaces that uphold the wellbeing of the people using them day-to-day. A WELL Certified project has the potential to add measurable value to the health, wellbeing and happiness of building occupants. It can also generate increased savings and productivity to the building owner or manager,” said Spencer.

Much of this can be achieved through better ventilation, he suggested.

“Natural ventilation will save a property between 10 and 30% in energy consumption, help remove air pollutants by as much as a third to allow for better breathing environments, provide low

maintenance and easy-to-access operation of windows, helping staff feel ‘in control’, and more satisfied in their working environments.”

He highlighted how technological advances had brought about greater opportunities for connectivity and how intelligent hubs like the GEZE Cockpit could integrate natural ventilation with the management of automatic doors, smoke and heat extraction, escape and rescue route management and access control.

“But this requires a vision,” he insisted.

“The forethought of designers in considering the end game, the proposed use of the building and the desire to create a workplace that puts people at the heart of how it should operate.”

8 www.geze.co.uk

* info.uk@geze.com ( 01543

443000

Find this issue plus much more on the fc&a app and fca-magazine.com

53

Floors, Walls & Ceilings

Schlüter-Systems introduces statement designer shelving Released at Cersaie 2018 and offering new possibilities for the creation of stylish features on tiled walls, Schlüter-SHELF is a welcome introduction to SchlüterSystems’ range of solutions for tile and stone.

SHELF avoids the need to drill through finished coverings (and the waterproofing beneath) in pursuit of a shelving solution.

Instead, products in the range are designed to coincide with grout lines, creating a more aesthetically pleasing and harmonious feel across an installation as well as preventing damage to its layers.

Three variants are available: Corner (SHELF-E) – range includes options for standard or retrofit installation Niche insert (SHELF-N) – sized to slot into the grout joints within a Schlüter niche Conventional (SHELF-W) – with anchoring legs for embedding into adhesive.

The shelves feature the distinctive FLORAL and CURVE designs of the SchlüterKERDI-LINE-STYLE/-DRAIN-STYLE grates released at Cersaie 2017, allowing for coordination across the drainage and storage elements of a room design. They are available not only in a smart brushed stainless steel but also in three of the most popular Schlüter-TRENDLINE finishes – ivory, stone grey and dark anthracite.

This new addition expands further upon Schlüter’s range of designer solutions for finishing and features.

8 www.schluter.co.uk * pr@schluter.co.uk ( 01530

813396

THERE CAN ONLY BE ONE! Easy and quick to apply by trowel or spray Extremely fast drying time Universal use: internal or external and new & old buildings Unbeatable flexibility Excellent crack-bridging capability >2mm Strong resistance to hydrostatic pressure Highly adhesive to most common building substrates Overcoat in just over 4 hours UV-resistant Can be over-coated with Remmers coatings Extreme resistance to frost and salts Solvent & bitumen free – low odour

01293 594 010 www.remmers.co.uk

54

Find this issue plus much more on the fc&a app and fca-magazine.com

Floors, Walls & Ceilings

Wythenshawe Hospital opts for UZIN system By adopting a UZIN system, over 2000m2 of flooring was renovated without having to close down the Starlight Children’s Ward within Wythenshawe Hospital.

The floor at the Starlight Children’s Ward was in need of refurbishment, however, Wythenshawe Hospital didn’t want to close

down the ward so important care could be maintained during the overhaul. It was important that the renovation was quick,

clean and caused as little disturbance as possible so as not to interrupt the treatment provided by Wythenshawe Hospital.

The flooring contractor, Momentum Flooring, worked with both the hospital and UZIN to help find a solution. With UZIN’s unique product systems, the new safety covering could be installed without having to remove the old floor. Momentum Flooring also worked in stages so areas within the ward could be kept running, whilst keeping any disturbances to a minimum. It also avoided any excessive dirt, dust and noise during the renovation.

By utilising a UZIN system, the floor was refurbished whilst vital patient care could be sustained. The new floor was also exceptionally well-finished with intricate designs and patterns inserted into the floor. This has helped enhance the ward, creating a warm and welcome environment for children and their parents.

For more information on the UZIN system used at Wythenshawe Hospital’s Children’s Ward, visit the website below.

8 www.uzin.co.uk

* uzin-uk@uzin-utz.com ( 01788

530080

IDS’ Tuscan Forte range offers the character of solid wood with easy installation

Large wins for Flowcrete UK at the FeRFA Awards 2018

The Forte range is the latest addition to the Tuscan wood flooring collection from IDS. An in-vogue white-washed woodgrain, modish grey and classic oak are among the six elegant colours that offer the character and warmth of solid wood while being easy to fit, thanks to the Välinge 5GC locking system.The 150mm-wide Barley, Barn Oak White Washed, Light Grey, Natural White Oak,Toffee and Truffle planks come with a choice of brushed, hand-scraped and saw-marked textures for greater authenticity and visual appeal. Enhancing any new-build or renovation project, the FSC-certified Forte range comes with the assurance of a 25-year warranty.The range’s multi-ply construction provides a highly stable flooring solution that is suitable for use with a variety of underlays and is compatible with water-piped underfloor heating systems.Välinge 5GC profile technology assures fast, easy and strong click installation.The complete Tuscan collection offers 35 wood flooring options.

Flowcrete UK has won the ‘Large Industrial Project of the Year’ and ‘Large Commercial Project of the Year’ categories at the FeRFA 2018 Best Practice Awards. The Resin Flooring Association (FeRFA) represents major businesses and organisations involved in resin flooring, screeding and surface preparation. Its annual awards event, which this year was held at St Johns Hotel, Solihull, on November 23rd, celebrates the best of the resin flooring industry’s achievements from over the past year. At the awards ceremony, Flowcrete UK was first presented with the Large Industrial Project of the Year award, thanks to its work at The Macallan’s stunning new whisky distillery. This was soon followed up by winning the Large Commercial Project of the Year category in recognition of the Menai Science Park’s (M-SParc) Flowcrete UK floor. The Sandbach, Cheshire-based resin flooring manufacturer was also nominated in the Innovation Award category for its fast curing terrazzo system Mondéco Rapide.

* info@idsurfaces.co.uk

* ukweb@flowcrete.com

( 08457 298298 8 www.idsurfaces.co.uk

( 01270 753000 8 www.flowcrete.co.uk

Find this issue plus much more on the fc&a app and fca-magazine.com

55

KBB

TBS Fabrications and Amwell Systems join forces to provide unbeatable service TBS Fabrications and Amwell Systems have announced that they have joined forces as TBS Amwell, a move that will prove to be great news for contractors in the UK washroom market.

TBS Fabrications is currently the UK’s largest washroom provider in the design and build market with an annual turnover of £9m.

With TBS’ heritage in the North West and with Amwell’s strong presence in the South, the combined teams are set to become the largest washroom supplier in the contractor market over the coming year.

Greg Wilson, Sales Director, comments: “For us, TBS Amwell is a natural partnership, both companies were leaders in their field, so we are combining their strengths. We know that contractors want good quality, excellent value products which are fit for purpose, from a supplier that they know will deliver. TBS Amwell is that company.”

Sarah Gulliver, Commercial Director, continues: “The core value of TBS Amwell is ‘value without compromise’. Ensuring that we provide products, services and support all at a great value. Our new combined product range is competitively priced, but always offers the highest quality product, technical service and support.”

With offices in Irlam in Manchester and Stevenage in Hertfordshire, as well as a team of national sales managers, TBS Amwell will cover the whole of the UK and is proud to remain a UK manufacturer. With over 80 years’ combined experience, TBS Amwell has a strong team of highly experienced people with a positive ‘can-do’ culture that will be reflected in the products and services offered to contractors.

8 www.tbs-amwell.co.uk

* contact@tbs-amwell.co.uk ( 01763

276200

Ideal Standard starts collaboration with Palomba Serafini Associati

Striking NAYA 6 sink from BLANCO The NAYA 6 sink from BLANCO UK is the perfect finishing touch to create a stylish modern kitchen. The SILGRANIT PuraDur compact sink offers a spacious bowl with an integrated overflow. The rectangular outer edge means the sink has a sleek frame which blends seamlessly into the kitchen worktop. Perfectly suited to 60cm sink cabinets, the NAYA 6 sink has a 20cm-deep bowl and comes with a 3.5" basket strainer and is available for inset installations. The model is available in multiple colours to suit any style, comprising white, pearl grey, coffee, alu metallic, tartufo, nutmeg, champagne, rock grey, jasmine and anthracite.

8 www.blanco.co.uk * info@blanco.co.uk ( 01923 635200

56

Ideal Standard International announced at the Milan Triennale its collaboration with prominent Italian architect and design studio Palomba Serafini Associati. The company also announced the creation of a design centre in Milan, where Ludovica Serafini and Roberto Palomba will work closely together with internal Ideal Standard experts and their own design team to drive Ideal Standard’s overall design philosophy. The new collaboration fits perfectly within Ideal Standard’s long and successful history of innovation and design. A history of combining cutting-edge technologies with avant-garde aesthetics to accompany society’s evolution and redefine the role of the bathroom within it. * customercare@idealstandard.com

( 01482 346461

8 www.ideal-standard.co.uk

Multi-generational living In these days of multi-generational living, the best option is a walk-in wetroom-style showering space that can work alongside a traditional bath. However, if space is limited, the walk-in Shower + Bath from Duravit is an ideal alternative. Designed by EOOS, it has an integrated glass door which transforms the bathtub into an accessible open shower. If the preference is to remove the bath and install a wetroom-style shower, select one featuring an antislip surface ideal for all ages and preferably with a concealed drain, such as the Stonetto from Duravit. * info@uk.duravit.com

Find this issue plus much more on the fc&a app and fca-magazine.com

( 01908 286680

8 www.duravit.co.uk

Create a good sound environment Design flexibility for your internal space

Photographer: Gordon McAvoy

Saint-Gobain Ecophon, is a global supplier of acoustic ceilings and wall panel systems which contribute to good room acoustics. Our systems support a healthy indoor environment, and are used within offices, education, healthcare, retail and industrial manufacturing premises.

With a deep understanding of the impact of sound on people and specialised knowledge in how best to implement our systems for maximum effect, we are confident we offer a product range that will help you create a space with optimal room acoustics while exploring almost endless design possibilities.

For further information or for acoustic advice for your internal space, please contact our specification team on 01256 850977, alternatively email info@ecophon.co.uk or visit www.ecophon.com/uk

Building Elements

Visqueen’s Gas Vent Mat, bollards and other additional materials are also being used within the system which Laing O’Rourke is installing along with the Gas Barrier membrane

The site for the development was classified as a ‘moderate risk’ Characteristic Situation Level 3 for ground gas, under the gas membrane code of practice BS 8485:2015

Visqueen and SIG protect Hinkley Point workers from ground gases Visqueen gas protection systems have been supplied by SIG Construction Accessories to an accommodation facility for construction workers and their families in order to protect against ground gases.

W

orking with contractor Laing O’Rourke, a comprehensive gas protection membrane system was installed at the development in Bridgwater, Somerset, which supports the construction of the new Hinkley Point C nuclear power station.

Consisting of modular-style accommodation blocks and a large amenity building, all accommodation buildings are designed as lightweight prefabricated structures providing for safe and efficient construction and removal of the campus.The buildings are designed to meet the highest current environmental standards including BREEAM. The site for the development was classified as a “moderate risk” Characteristic Situation Level 3 for ground gas, under the gas membrane code of practice BS 8485:2015, as it had high concentrations of methane and CO2 present.The very high insulation and efficiency standards for the buildings made it critical to install an effective gas protection system in order to meet the standards outlined in the BS 8485 ‘Design of Protective Measurements for Methane and Carbon Dioxide Ground Gases for New Buildings’ guide to ensure residents were protected.

Working with ASL Environmental to design the venting ensured Visqueen had the full calculations for the required vent systems that would be installed alongside the gas membrane.

Visqueen’s Gas Barrier offered the ideal solution for this project, as it protects buildings against both methane and carbon dioxide gases.

SIG Construction Accessories became involved in the project when Visqueen and Laing O’Rourke approached the Bristol

58

branch to supply the materials to the site. Having previously supplied Visqueen products to numerous projects before, the team at SIG CA were able to ensure they had the stock of the required products when they were needed on site.

Visqueen’s Gas Vent Mat, bollards and other additional materials are also being used within the system which Laing O’Rourke is installing along with the Gas Barrier membrane. To ensure the correct standard of installation operatives received training at Visqueen’s new Training Academy in Heanor.

Commenting on the project, Anthony Goode,Visqueen’s Regional Sales Manager, said: “In order to ensure that the operatives had all the necessary skills and were confident installing the gas protection system, we provided full training at our new Training Academy in Heanor. This provided practical, hands-on experience to all those involved and helped certify that all the protection measures are installed to the correct standard.”

Find this issue plus much more on the fc&a app and fca-magazine.com

The designs were put together in conjunction with AWW Architects and AECOM, ensuring that the gas protection elements worked in conjunction with the rest of the building structure.

“Visqueen’s expertise in specifying suitable products for gas protection and providing training to our team has been invaluable,” commented Scott Palmer from Laing O’Rourke.

“Development of industrial sites can often be a challenge and ensuring we meet the legislative demands to protect buildings from potentially harmful gases is fundamental and it’s great peace of mind to know that the site is fully protected.”

Installation is currently taking place on site with ASL Environmental carrying out the verification and validation process in accordance with the codes of practice.The project is due to be complete in January 2019.

8 www.visqueenbuilding.co.uk * enquiries@visqueen.com ( 0333

202 6800

Visqueen’s Gas Barrier offered the ideal solution for this project, as it protects buildings against both methane and carbon dioxide gases

Building Elements Slide aside, ordinary

Sika Sarnafil and partners scoop NFRC awards

The Luminia SC156 Lift and Slide door is a brand-new aluminium sliding door from leading aluminium systems company AluK that is anything but ordinary.

Designed primarily for high-end apartment blocks and luxury hotels, it has already been specified ahead of a launch in Berkeley Homes’ prestigious West End Gate residential development in Marylebone, Central London.This the second product to be introduced into AluK’s new Luminia premium product tier, which is characterised by contemporary aesthetics and exceptional performance; and it sits alongside the already popular Luminia F82 bi-folding door. In terms of aesthetics, the SC156 Lift and Slide door boasts slim sightlines of 95mm around the frame and just 50mm on the central interlock. It can accommodate large expanses of glazing up to 3100mm high with panel weights of up to 400kg, so truly maximises space, views and natural light.When it comes to performance, this door has achieved a marketleading weathertightness rating of 1500 Pa.

Market-leading single-ply roofing manufacturer, Sika Sarnafil, and two of its registered contractors, have triumphed at the National Federation of Roofing Contractors (NFRC) Scottish Roofing Contractor of the Year Awards. The awards, which recognise outstanding standards of workmanship and technical expertise in the roofing industry, saw Sika Sarnafil win ‘Supply Chain Partner of the Year’ and Perth-based roofing contractor, Aim Developments, come out top in the ‘Single Ply Roofing’ category. The NFRC announced the winners at a ceremony presented by TV Broadcaster Jackie Bird, on Friday 26th October at The Grand Central Hotel, Glasgow. Judged by an independent expert panel, finalists were chosen for their exceptional work on Scottish roofing projects across 13 categories. Sika Sarnafil received the award for ‘Supply Chain Partner of the Year’ alongside one of its registered contractors, Q9 Cladding Solutions, SFS Group Fastening Technology and Kingspan Insulated Panels UK, for the prestigious Victoria & Albert Museum in Dundee.

* laura.morgan@aluk.com

* sarnafilroofing@uk.sika.com

( 01291 639739 8 www.aluk.co.uk

( 01707 394444 8 www.sarnafil.co.uk

Firestone adds a fourth to Capital Quarter success in Cardiff

A fourth building has been completed using Firestone Building Products’ RubberGard EPDM waterproofing system for flat roofs at the prestigious Capital Quarter development, in the heart of Cardiff’s Commercial Enterprise Zone.The RubberGard EPDM roofing system has become part of a proven formula for success for developer, JR Smart, with four office buildings designed by architect firm, Morgan2Morgan, using the system as part of a warm roof build-up. As with the previous three office buildings, the RubberGard EPDM roofing system has been installed by Firestone Licensed roofing contractor, Envirotek Specialist Products. A further two office buildings are planned for the scheme, and these are also anticipated to follow the same, proven specification. * info@fbpl.co.uk

( 01606 552026

8 www.firestonebpe.co.uk

Levolux responds for Kao Data centre Kao Data London One, the first of four freestanding data centre buildings on the 15-acre Kao Data Campus located in the Harlow Enterprise Zone, is an imposing construction which features a dazzling external brise soleil screening solution provided by Levolux. With an unparalleled track record delivering screening solutions for data centres, Levolux was the natural choice for delivering the eye-catching and colourful solution for Kao Data London One. The Levolux solution combines its Aerofoil Fins, arranged vertically and its VLS100 Contour Louvre system, arranged horizontally. In total, Levolux installed 644 Aerofoil Fins, each measuring 400mm wide by 54mm thick, with lengths of up to 5.5m. * info@levolux.com

( 0208 863 9111

8 www.levolux.com

Klober Permo air gets public sector recognition Klober has received a boost for its low resistance air-open underlay Permo air with certification by Local Authority Building Control (LABC) for its Registered Details scheme. In the past, variable performance of vapour permeable underlays led to the NHBC and BSI deciding that only airopen membranes could be used without supporting high-level ventilation. Designed to meet this requirement and prevent condensation forming in the roofspace, Klober Permo air offers an exceptional level of breathability. It has a water vapour transmission sd-value of 0.009m, and a water vapour resistance confirmed to be as low as 0.045 MNs/g. As a result, it has been specified for roofing upgrades of many high-profile and historic buildings.

8 www.klober.co.uk * klober@yourresponse.co.uk ( 01332 813050

Find this issue plus much more on the fc&a app and fca-magazine.com

59

Building Elements Simpson Strong-Tie updates ‘Connectors for CLT’ catalogue

To support the growing use of cross-laminated timber (CLT) in the UK and Europe, leading connector manufacturer Simpson Strong-Tie has released an updated version of its ‘Connectors for CLT’ catalogue. Featuring a host of new products – including heavy-duty angle brackets, hold-down connectors and structural screws – this edition represents a complete set of solutions for the assembly of CLT buildings, as well as steel and chemical mortar products designed specifically to connect the entire structure to concrete.To further support the design and construction of CLT structures, Simpson Strong-Tie also has a team of engineers based at its manufacturing plant in Tamworth, offering technical support and assistance. * sgreenway@strongtie.eu

( 01827 255600

8 www.strongtie.co.uk

The Golf Classic tees up for another exciting year Since its launch in 1993, the Golf Classic has attracted thousands of players from across the country, making it a significant networking event for the construction industry with new business relationships and friendships forged on and off the green. Many return each year to take part, but we love to see new faces too, and the 2019 tournament is set to be one of the biggest yet. Great prizes will be offered, and there are more opportunities to win a place in the Grand Final. Entries must arrive by the end of February and play tees-off in March 2019. * info@thegolfclassic.co.uk

( 01892 752300

8 www.thegolfclassic.co.uk

McAvoy awarded £15m contract to build hospital wing The McAvoy Group has been awarded its largest healthcare project to date – a £15m contract for the offsite construction of a new wing at Northumbria Specialist Emergency Care Hospital in Cramlington. Due for completion in spring 2019, the 6500m2 three-storey building will be linked to the existing hospital. The new wing is being constructed by McAvoy using an advanced off-site solution to reduce the build programme by half to less than 12 months. This will help Northumbria Healthcare Trust to meet the rising demand for patient services in the region and maintain its position as a world leader in emergency medicine.

8 www.mcavoygroup.com/healthcare * info@mcavoygroup.com ( 0288 774 0372

Offsite Solutions announces how off-site can help minimise Brexit impact Deanestor announces record orders and strong financial performance Deanestor, a UK-leading contract furniture and fit-out specialist, has announced a record order book and strong financial performance this year. The business has generated £20m of orders in 2018 from contractors and developers – a record order intake in the history of the company. This is a 40% increase on the same period last year and has secured projects for the business for 2019 through to 2020. Turnover has grown from £2.5m in 2002 when the company was acquired by its current owners to in excess of £16m this year. Its average project size has increased to over £1m.

8 www.deanestor.co.uk * enquiries@deanestor.com ( 01623 420041

60

Offsite Solutions has announced how it can help construction clients and contractors mitigate some of the economic uncertainty around Brexit. Many main contractors and developers are concerned about potential cost inflation and project overruns as a result of Brexit. By placing an order for bathroom pods with Offsite Solutions before 31st March 2019, the price agreed will be fixed for the duration of the project, regardless of the effects of Brexit. By entering into a contract for Offsite Solutions’ factory-built bathrooms, contractors and developers will secure a fixed price for one of the larger packages in a building project and at least 12 to 24 months ahead of the traditional procurement process for in-situ bathrooms. * info@offsitesolutions.com

( 01278 780807

8 www.offsitesolutions.com

Dublin apartments use Magply performance The full range of performance benefits of Magply boards have been utilised in the specification of an advanced off-site system being employed in the construction of a new apartment building standing alongside a famous central Dublin landmark. Linham Construction is creating 10 single-bedroom apartments plus a two-bedroom, duplex property. The structure has been designed and specified to achieve an A1 building energy rating under Part L of the Building Regulations. 9mm Magply boards are being used to walls and 12mm to ceilings of construction for their strength, fire performance and overall durability. * sales@magply.co.uk

Find this issue plus much more on the fc&a app and fca-magazine.com

( 01621 776252

8 www.magply.co.uk

Year at a Glance

Celebrating 170 years of excellence Established in June 1848, Newton Waterproofing Systems is the oldest supplier of waterproofing and damp proofing products to UK construction, and 2018 is its incredible 170th year of trading. The independent company is still family owned and run, and its ethos, expertise and willingness to innovate are what have allowed the brand to continually compete and grow.

The 21st-century Newton Waterproofing has 33 employees providing solutions for architects, developers, contractors and homeowners on projects from the smallest domestic basement, to highend properties, commercial developments and extensive civil infrastructure projects.

Recycling goes from strength to strength Introduced in March 2017, the Newton Membrane Recycling Service is the only scheme in UK waterproofing that collects and recycles plastic waterproofing waste, with the aim of solving the issue of the hundreds of tonnes of HDPE membrane that are sent to landfill every year.

Newton Waterproofing

Newton committed to finding an answer to this by investing two years of development and £27,000 for the necessary machinery in order to successfully launch the service.

The results have included the collection of 8.24 tonnes of HDPE to date, and the prevention of 9.46 tonnes of CO2 being released into the atmosphere.

Comprehensive third-party approvals Newton has long been synonymous in the UK with the highest levels of product quality and technical service, and this reputation is now further reinforced by two more products achieving new, third-party Agrément approvals.

The two new Agréments sit alongside Newton’s existing selection of product approvals, and now mean that the company can boast thirdparty testing approvals for all three Types of waterproofing, defined by BS 8102:2009 as Types A, B and C. The full set of approvals are also all accepted by the UK’s leading new home warranty and insurance provider, the NHBC.

8 www.newtonwaterproofing.co.uk

62

*

Kent Environment Champion from the Kent Environment Strategy Family Business of the Year at the Times Local Business Awards The Kent Unsung Hero Award from Family Business Place.

Other awards that shortlisted Newton as a finalist included the Construction Enquirer Awards, London Construction Awards, National Recycling Awards and Plastics Industry Awards.

Lillie Square, London SW6 One of the top London developments, Lillie Square transformed a 7.4-acre car park in Earl’s Court into 800 luxury residences, with a belowground clubhouse, swimming pool, spa, sauna, steam room, gym and function room, all of which required robust waterproofing protection.

Newton joined forces with its Specialist Contractor Stonehouse Basements in order to provide both Type A and Type C waterproofing solutions on this prestigious development. Both systems were professionally installed to an exceptionally high standard

by Stonehouse, resulting in a completely dry internal environment that also fulfils the requirements of the British Standard for waterproofing – BS 8102:2009.

Awards across the board Throughout 2018, Newton has been recognised with a host of awards thanks to its industryleading environmental and business initiatives.

The awards included: Medium Business of the Year and the Commitment to the Environment Award at the Kent Excellence in Business Awards The Sustainability Award from the Property Care Association

info@newtonwaterproofing.co.uk

Find this issue plus much more on the fc&a app and fca-magazine.com

(

Go back to school with Newton’s RIBA CPDs Newton’s three RIBA-approved, double-points CPD seminars are a perfect guide through the plethora of specification choices in the waterproofing industry. Seminars can be delivered at your office or at Newton’s training facility, whilst the content can be tailored to address your company’s individual learning requirements.

Newton went out of their way to provide a CPD that was engaging, up-to-date and tailored to our areas of work.

The speaker was extremely knowledgeable and ensured that they accommodated all team members equally.

We will certainly be in touch with Newton in future to discuss our upcoming projects.

– Damon Hilliard, BDB Design LLP

01732 496512

Rockfon

Metal ceilings strengthen onestop specification

With Rockfon you can have your cake and eat it Following a €12m restoration, iconic Dublin landmark Bewley’s Grafton Street has reopened.

Rockfon Mono Acoustic ceilings are installed throughout to create a comfortable acoustic environment. The restoration of its interior has seen many original features restored to their former glory. There are new additions too, including the expansion of the in-cafe bakery which enables customers to see Bewley’s pastry chefs and bakers create delicious treats. Architect, Brendan Duffy, commented: “The introduction of Rockfon acoustic ceilings throughout, directly fixed to the plasterboard ceilings, minimised the visual impact on the building fabric, particularly the ceiling covings. In addition, the sprayapplied finish to the Rockfon panels provides a seamless ceiling in keeping with the original plasterboard ceilings and concealing the use of a modern acoustic treatment.” The ceiling offers Class A2 fire protection and dimensional stability at up to 100% relative humidity and allows for easy incorporation of lighting, air conditioning and ventilation systems.

Rockfon is proud to announce the launch of its Metal ceiling tiles, a unique innovation combining proven stone wool performance and attractive metal surfaces. No other tile can offer Class A1 safest reaction to fire, the highest Class A (aw= 1.00) sound absorption from its stone wool core and complete the offer with a modern metal finish. Rockfon Metal combines the unique stone wool performance characteristics such as A1 safest reaction to fire and highest Class A sound absorption with an attractive and modern metal surface.This bright white surface enables specifiers to create contemporary ceiling designs that offer the additional benefits of high light reflection.

Year at a Glance

dealership can display up to 872 cars. The ground floor is home to the complete BMW range, where 7500m² of Rockfon Tropic ceilings were chosen to provide outstanding acoustic control and contribute to the light, open interior design.

The new building is designed to create a comfortable and welcoming environment.

Rockfon’s ceiling plays a pivotal role here. The large showroom is fitted with floor-to-ceiling glazing and tiled floors which could make the open-plan area prone to reverberation.

The Class A sound absorption of Rockfon Tropic controls the ambient sound level in this space, reducing echo and improving speech intelligibility.

Healthy high-tech luxury delivered

Acoustic challenges answered with intelligent solutions

Rockfon turning heads and driving performance Rockfon Tropic ceilings are installed in Europe’s largest car showroom, Sytner BMW, Sheffield. Designed by AT Architects, the three-storey, 18,500m² BMW and MINI

8 www.rockfon.co.uk

*

with state-of-the-art facilities.

Rockfon acoustic products play a pivotal role in both schools by creating stimulating learning environments that are at the heart of the architect’s vision.

Delivered under the 21st Century Schools and Education Programme and costing £36.5m, the new Caldicot School building in Monmouthshire offers the innovative and flexible learning facilities demanded by a contemporary secondary school. The building is designed to be energy-efficient, and natural light has been optimised throughout. Monmouth Comprehensive, costing £47m, is a brand-new school equipped

info@rockfon.co.uk

(

Rockfon acoustic ceilings are installed in a new state-of-theart health assessment clinic, Preventicum, Central London.

This specialist healthcare provider offers bespoke, indepth health evaluation and diagnostics which includes full-body scanning. Sonnemann Toon Architects designed the clinic’s interior with a hightech spec that has the feel of a luxury hotel. Architect Galina Borovikova explains how Rockfon Mono Acoustic helps create a sense of opulence: “It combines the elegance of a seamless ceiling with outstanding sound absorbing qualities which enhances the sleek interior and creates client privacy.” Rockfon Mono Acoustic offers a unique solution for ceiling design as it combines high acoustic performance with a smooth, white, seamless surface. The Class A sound absorption of Rockfon’s monolithic ceiling significantly decreases echo and reverberation levels, creating a relaxed environment where confidential communication between doctor and client is optimised.

0208 222 7457

Find this issue plus much more on the fc&a app and fca-magazine.com

63

Polyflor

Year at a Glance

Polyflor launches Polysafe Quattro PUR Polyflor has just announced the launch of its new Polysafe Quattro collection. This innovative safety flooring range offers barefoot and shod sustainable wet slip resistance with a stud-free finish for enhanced comfort underfoot.

Polysafe Quattro has been specifically designed to provide a high degree of slip resistance in continually wet areas within the healthcare, residential care, housing and leisure sectors. This includes areas such as changing rooms, walk-in showers, wetrooms, adapted bathrooms, spas and pool surrounds. As the potential for slips is higher in wet environments, it is important to choose HSEcompliant safety flooring such as Polysafe Quattro which offers sustainable slip resistance, assured throughout the product’s guaranteed life.

Silentflor acoustic flooring helps create stylish burger restaurant interior Silentflor from Polyflor’s collection of acoustic floorcoverings was chosen for the interior design scheme of a brand-new burger restaurant, The Counter Custom Burgers at The Quay in Glasgow. The Counter is

a Los Angeles-based burger restaurant franchise, and Glasgow is its first location in the UK, offering a new burger experience to customers with a choice of over 80 ingredients to build your own custom burger. Approximately 220m² of heavy commercial Silentflor flooring in Light Industrial Concrete was fitted in the front of house areas of the restaurant which can seat up to 100 covers. Another 100m² of Polysafe Standard safety flooring with sustainable slip resistance was also used for the back of house kitchen and staff zones.

Expona Simplay offers speedy flooring solution for Ubisoft office Expona Simplay loose lay luxury vinyl tiles from Polyflor have formed part of a creative working space for video game developer Ubisoft’s office in Newcastle upon Tyne. Installed

by Monument Flooring, based in Gateshead, 186m² of Expona Simplay PUR tiles in the American Oak design features in meeting rooms and communal areas at the Ubisoft office, where developers create popular games such as Assassin’s Creed, Tom Clancy’s The Division and Watch Dogs.

The American Oak design is a classic oak with bevelled edges that perfectly complements the office’s bright, bold and modern interior design scheme. Quick to install, these loose lay tiles were the ideal choice for fitting alongside carpet tiles which were used in other areas.

8 www.polyflor.com

64

*

Silentflor flooring improves acoustics at Newport primary school Concrete-effect Silentflor acoustic sheet vinyl flooring from UK manufacturer Polyflor was chosen to refurbish the reception area at St Andrew’s Primary School in Newport, South Wales. Installed by Cardiff-based Parker Flooring Supplies, 84m² of Silentflor flooring in the Dark Grey Concrete design was fitted in the primary school’s reception, meeting room and office areas.

This project was headed up by facilities management and contract services provider Newport Norse. Silentflor is a robust, beautifully designed collection that achieves 19 dB impact sound reduction and has been expertly created for a wide range of heavy traffic commercial interiors, such as installations in the education sector.

Expona Bevel Line ensures stressfree departures at Cardiff Airport Luxury vinyl tiles from the Expona Bevel Line Collection were used as part of a brandnew departures area which was recently unveiled at

info@polyflor.com

Find this issue plus much more on the fc&a app and fca-magazine.com

(

0161 767 1111

Cardiff Airport. The light, clean, contemporary design of the Portland Stone tiles complements the classic Light Oak planks, defining seating areas and walkways, and creating a calming, stylish environment perfectly suited for the soonto-be bustling departure area.

Versatile, both designs work well alongside the lounge’s slate grey colour, a decision inspired by the famous Welsh slate heritage.

Ocean Fish and Chip Restaurant dives into the Palettone collection Opening just off the A6 in Preston, The Flower Bowl, a large, single-storey building (4200m), with a grass roof which undulates to give a natural appearance, is a new mixed leisure destination at Barton Grange. Part of the build was the addition of the Ocean Fish and Chips Restaurant featuring a maritime-inspired decor. Six designs from the Palettone PUR range were selected to create the bespoke floor in the dining area of the restaurant. Caramel Kick, Buttered Corn and Hay Grain featured to create a sand effect and the blues of Weekend Sky, Superior Sky and Sapphire Star were used in a waved pattern to create the Sea.

Knauf AMF

Year at a Glance

Heradesign proves it’s tough enough inside and out

Stylish acoustic solutions from Knauf AMF make a good start As part of East Renfrewshire Council’s ambitious expansion plan for early years provision, the new Arthurlie Family Centre offers places for children aged between three and five, and spaces for community use.

A mixture of acoustic ceilings and ceiling rafts from Knauf AMF are specified throughout to help create a visually appealing and comfortable auditory environment.The entrance to Arthurlie Family Centre has a steep pitched roof designed to allow light to flood in; it also gave the architect the opportunity to make a feature of the exposed timber structure. AMF Topiq Sonic ceiling rafts are fitted here. East Renfrewshire Council Senior Architect, Marie Mullen, explains why:“Lining the roof soffit with hard plasterboard would have produced unpleasant echoes, so I specified square-shaped AMF Topiq Sonic ceiling rafts to improve the acoustics. Either side of the entrance porch are two informal meeting areas where circular-shaped AMF Topiq Sonic rafts are suspended on long wires to create an intimate feel and provide acoustic privacy.”

8 www.knaufamf.com

*

Albion Primary in London, an Ofsted ‘Outstanding’-rated school, has expanded and is now a valuable local venue and community resource. Heradesign ceilings from Knauf AMF are installed throughout the new building to meet the aesthetic and acoustic demands of this innovative project. Architect firm Haverstock worked in partnership with Morgan Sindall. Heradesign is safe to use in semi-exposed external areas which is one of the reasons Haverstock Associate Partner,Tim Bystedt, specified it: “Heradesign has an interesting texture and is available in the neutral colour we wanted for the underside of the entrance canopy and outside stairwell. It was easy to install and did not require any painting or plastering which helped keep costs down and the project on schedule.”

Heradesign works out at 1Rebel 1Rebel is a new chic boutique brand of gyms in London. 1Rebel promises that every class feels like a night out.To achieve this, each gym is designed as a mix of contemporary industrial chic with luxury and theatrical glamour. Specified in all five

info@knaufamf.co.uk

(

locations by 1Rebel’s architect firm Studio C102, Knauf AMF Heradesign acoustic ceilings and wall absorbers helped the architect fulfil this vision. Studio C102 Principal, Kyriakos Katsaros, explains why:“I like Heradesign for two reasons. Firstly, as a practice, we prefer to use building materials in their raw state, and Heradesign with its naturally textured surface creates a tactile finish and fits with our ethos and the gym’s industrial aesthetic. Secondly, I wanted to make the environmental footprint as low as possible for the client.

Heradesign helps us accomplish this because it’s produced from sustainable wood-wool.”

New Heradesign Creative – designed to inspire Heradesign Creative is an innovative range of decorative and functional acoustic wall absorbers available in eight shapes that can be combined to produce truly unique designs. Architect practice Reiach and Hall’s Director, Angus Wilson, specified these innovative wall absorbers in triangular shapes for the University of Edinburgh’s Lister Learning and Teaching Centre’s reception and breakout spaces.

“The triangular pattern was initially developed to reflect a 1970s motif that is repeated through various signage and graphics around the building,” he said. “We chose a neutral colour, RAL9010, for the wall absorbers to enable signage elements to be mounted on to their surface. We also wanted to introduce a textured finish, in keeping with the original building, that is tough enough to withstand these heavily trafficked areas.”

0191 518 8600

Find this issue plus much more on the fc&a app and fca-magazine.com

65

SchlüterSystems

Year at a Glance

A host of new finishes for Schlüter’s slimmest tile edge profile The latest development from Schlüter-Systems allows slimline edge protection to blend even more seamlessly with installations of the moment.

Due to popular demand, slimline wall edge profile, Schlüter-FINEC, is now available in a host of fashionable finishes that complement current tiling trends. It is the latest solution to receive the SchlüterTRENDLINE treatment; all of the TRENDLINE textured finishes, plus matte black (MBW) and matte white (MGW), can now be applied to the profile. Customers also have three new heights of the slimline profile to choose from – 9, 11 and 12.5mm. These new options enabling fine and elegant corner detailing for a wider range of installations.

New pedestal system raises the bar Schlüter-Systems is pleased to announce the debut of Schlüter-TROBA-LEVEL, a pedestal system for balconies and terraces. The seven-part system is the first loose-lay option to be offered by the company and is fully compatible

with its other balcony and terrace solutions. The TROBALEVEL system is stackable and can be combined to form heights between 3 to 1000mm, making it adaptable to a wide range of projects. Broadening the possibilities for flow and transitions between different landscape elements, the system can also accommodate a slope of up to 10%. Manufactured in polyethylene and polypropylene, the TROBA-LEVEL system is also UV resistant, recyclable, durable (each pedestal supports >1000kg) and temperature resistant (-40°C to +100°C).

Smart thermostat enhances UFH system Schlüter-Systems is delighted to announce the arrival of a new smart thermostat, a highly anticipated enhancement to its electric underfloor heating system, Schlüter-DITRA-HEAT-E. Based on Schlüter’s existing 2” thermostat, the new Wi-Fienabled introduction allows for more closely customised operation of the award-winning system.The discreet thermostat offers minimal visual impact within a room and connects directly to a chosen wireless network. In addition, an easy setup wizard and capacity to schedule up to six events per day results in ultimate flexibility for end-users. Alongside the new thermostat is a dedicated app; Schlüter-HEAT-CONTROL is free for both Android and Apple iOS devices and boasts an intuitive interface for easy control of the system.

8 www.schluter.co.uk

66

*

12 new finishes announced for popular wall profile Schlüter-Systems is pleased to announce the release of 12 new finishes for one of the manufacturer’s longest established profiles for tile and stone. The new additions are available for the 6, 8, 10 and 12.5mm versions of the company’s most popular wall profile, Schlüter-JOLLY. The latest finishes provide options to contrast or blend with wall tiles and also include matches to the latest fixture and fitting trends in kitchen and bathroom design. They include: brushed chrome, nickel/titanium (satin, polished and brushed), copper (satin, polished and brushed), brushed antique bronze, brass (satin and brushed) and bright black and brushed graphite.

Movement joint developments at Cersaie 2018 Cersaie 2018 saw the release of two advances for the SchlüterDILEX range: Crème, Dark Anthracite, Joint Grey and Stone Grey add further depth to the range of colours available for

pr@schluter.co.uk

Find this issue plus much more on the fc&a app and fca-magazine.com

(

the inserts of DILEX profiles.

The new insert colours allow customers to achieve even closer matches to their chosen tile or stone, making Schlüter’s already discreetly designed movement joints even more inconspicuous within an installation. The release of a cross connector insert for some of the most popular joints in the DILEX range – intermediate joint DILEX-KS and structural joints DILEXKSBT20 and DILEX-KSBT30.

This new item allows for neater and more uniform handling of the intersections between perpendicular movement joints.

VR provides accessible introduction to tiling systems Designed by Lewis and Hickey Architects, Schlüter-Systems’ current UK offices opened in 2015. The 3480m2 premises routinely receive an enthusiastic reaction from visitors; with this in mind, they this year became the focus of the company’s first ever Google 360 Tour.

Through the use of a VR headset, individuals can coordinate their own experience of the premises, which are designed to bring the company’s often-invisible products to life through images, displays and semi-concealed installations. Schlüter-Systems would love to share its VR experience with architects and specifiers. To request a free, specially branded Google Cardboard headset, please get in touch.

01530 813396

Evinox Energy

HIUs can be commissioned and maintained remotely over the internet For any residential building project, time saved on site is hugely beneficial.Therefore, Evinox Energy has introduced remote commissioning and warranty validation for its ModuSat heat interface units (HIUs), which can significantly reduce the cost of commissioning and time spent on site. Many other HIUs for communal and district heating developments require an engineer to attend site to set-up every individual unit manually.

Evinox’s electronically-controlled ModuSat HIUs feature SmartTalk communication technology and can be connected over the internet to remote servers, enabling Evinox to check the operation of each unit remotely and adjust settings where required.

New online tool helps designers with HIU specification Evinox is excited to announce the launch of the ModuSat Heat Interface Unit Online Selector.

Available via the Evinox Energy website, this intuitive tool recommends the ideal HIU(s) for a district or communal heat network development, based on project parameters entered by the user. With over 15 years of experience in the design and manufacture of interface units for heat network systems, Evinox created the selector with M&E consultants in mind, aiming to provide a tool that is easy to use, and can help with sizing and selection whilst saving time for the specifier.

Evinox launches fresh new website Evinox Energy has announced the launch of its new company website, which features a fresh look and feel alongside userfriendly navigation, enabling users to browse through its extensive range of heat network products and services with ease.

These include a range of smart heat interface units (HIUs) and comprehensive support services including metering, billing, revenue management and service and maintenance.

Delivering a fully responsive experience, the website gives users a seamless transition from desktop to mobile browsing and has been designed to provide heat network information for housing developers, M&E consultants, housing associations and building managers, covering all stages of a communal or district heating project.

8 www.evinoxenergy.co.uk

*

Year at a Glance of just 33.4ºC, impressively low domestic hot water return temperatures and the ability to deliver flexible keep warm operation, the BESA test results provide a clear, independently verified confirmation that the Evinox ModuSat XR range delivers outstanding heating and hot water performance for modern heat networks.

CIBSE-accredited seminar explores heat interface unit test standard from BESA Evinox Energy has launched a new CIBSE-accredited CPD seminar following the introduction of the first UK test standard for heat interface units from BESA (British Engineering Services Association). The seminar explores aspects of the test regime and discusses how for the first time, designers and specifiers will be able to see the impact of a specific HIU on their network. Entitled ‘Understanding the BESA Test Standard for HIUs (VWARTS and All)’, the seminar is accredited by the Chartered Institution of Building Services Engineers (CIBSE) and provides credits towards consulting engineers’ CPDs.

Impressive results for Evinox ModuSat under BESA HIU testing Evinox is extremely proud to announce that the ModuSat XR heat interface unit has been tested to the BESA (British Engineering Services Association) UK Standard for HIUs, achieving impressive results all round.

Currently, only a handful of manufacturers have published results for the HIU test regime, with Evinox being one of the first to undertake the testing process. With an overall VWART

technical.email@evinox.co.uk

(

Evinox team of CIBSE certified Heat Network consultants expands Evinox has added to its CIBSEcertified technical and design team, with Design Engineer Arturs Kokins becoming the latest to successfully complete the CIBSE Heat Networks Code of Practice course, passing his final exam with flying colours.

The CIBSE Heat Network qualification is recognised across the industry and covers a broad spectrum of considerations for communal and district heating systems, demonstrating the depth of knowledge Evinox can offer to its customers in the design of heat network systems.

Arturs joined Evinox in early 2017 as a Graduate Engineer and has since developed his skills and gained valuable experience working on a number of key projects.

01372 722277

Find this issue plus much more on the fc&a app and fca-magazine.com

67