PREMIER SELECTED 2026
Scandinavian Essense — Every Surfaces Tells a Story
60x 60cm
60x 120cm
20/ 30x 120cm
80x 160cm
OSLO PREMIER SELECTED 2026
80x 240cm
TABLE OF CONTENT Surfaces ...
... 01
60x60 ...
... 02
60x120 ...
... 29
80x160 ...
... 66
STAIRS ...
... 72
COSMOS Big Slab 80x240 ...
... 79
PRIME CEMENTUM BEIGE
FINISH : MATT
PRIME CEMENTUM BEIGE
RANDOM : 4 PATTERNS
PRIME CEMENTUM GRIS
FINISH : MATT
RANDOM : 4 PATTERNS
PRIME CEMENTUM BONE
FINISH : MATT
RANDOM : 4 PATTERNS
PRIME CEMENTUM NERO
FINISH : MATT
RANDOM : 4 PATTERNS
PRIME CEMENTUM NERO
PRIME BELJIO CLAY
FINISH : MATT (R10)
RANDOM : 6 PATTERNS
PRIME BELJIO GREY
RANDOM : 6 PATTERNS
FINISH : MATT (R10)
OSLO PREMIER SELECTED 2026
28
ROYAL TECTONIC CREMA
FINISH : MATT
RANDOM : 3 PATTERNS
ROYAL ATOM BEIGE
FINISH : MATT / GLOSS
RANDOM : 3 PATTERNS
OSLO PREMIER SELECTED 2026
44
ROYAL SILK TRAVERTINE
RANDOM : 4 PATTERNS
FINISH : MATT / GLOSS
ROYAL PINAQUVA PEARL
RANDOM : 4 PATTERNS
FINISH : MATT
45
OSLO PREMIER SELECTED 2026
80x 160 REGAL SYMPHONY GRIS
REGAL TECTONIC CREMA
RANDOM : 3 PATTERNS
FINISH : EVAN
67
OSLO PREMIER SELECTED 2026
REGAL TECTONIC CREMA
Crafted For Pefection 800x2400mm
Crafted with seamless aesthetic continuity Allows the texture of the ceramic slab to be reproduced on the edge, digitally reprinted on the selected portion of the surface in a way that is very faithful to the original graphic. This process is result of an innovative production technology which has been patented and granted exclusively to OSLO Tiles that creates a much more realistic textural effect on porcelain stoneware surfaces, maintaining a continuous texture that descends from the top and continues throughout the thickness.
Where Digital Precision Meets Timeless Elegance. PERFECT EDGES, EVERY TIME
PERFECTION IN EVERY VEIN
Infinite applications in every location Product Specifications: Material: Premium Porcelain Stoneware Thicknesses: 15 MM Applications: Custom furniture, bathroom surfaces, countertops, and broad commercial use.
Kitchen Top
Bathrooms Top
Shelves and furniture
Tables
Timeless
EDGES Natural elegance in every fine detail.
SQUARED EDGE
ROUNDED STRAIGHT EDGE
ROUNDED EDGE
TRIPLE ROUNDED EDGE
CONCAVE EDGE
FLAT POLISH EDGE
STATUARIO LUX
Sizes 800X2400MM
Surface MATT
Thickness 15MM
Slim slab size to easy installation Through-Vein Pattern Stain resistance Built for Indoors & Outdoors High Durability
STATUARIO LUX
PANTAGONIA
Sizes 800X2400MM
Surface MATT
Thickness 15MM
Slim slab size to easy installation Through-Vein Pattern Stain resistance Built for Indoors & Outdoors High Durability
PANTAGONIA
PANDA WHITE
Sizes 800X2400MM
Surface MATT
Thickness 15MM
Slim slab size to easy installation Through-Vein Pattern Stain resistance Built for Indoors & Outdoors High Durability
PANDA WHITE
COPACABANA QUARTZ
Sizes 800X2400MM
Surface MATT
Thickness 15MM
Slim slab size to easy installation Through-Vein Pattern Stain resistance Built for Indoors & Outdoors High Durability
COPACABANA QUARTZ
POSITIONING Handling after cutting After completing all work on large format ceramics, take special care during handling, transport and installation at the client’s premises. Most damage to the structure occurs during these phases, caused by flexing, twisting or impact on edges and corners. When there are large cutouts, or more than one cutout, we recommend installing wooden bars (50 x 30 mm/1.2”x2.0”) along the entire length of the large format ceramic and also crossways, as per the diagram below to reduce the possibility of flexing (using hot glue to fix in place).
If the kitchen counter has a built-in basin assembled directly on the large format ceramic, provide support and fix the basin ceramic, provide support and fix the basin . so that it cannot cause twisting or flexing.
Positioning the reinforcements It is recommended to build reinforcements to be placed on the slab rear side at a reciprocal distance of 600 mm (24.0 in). All joints must be reinforced in the lower part. Gaps, not supported by any surface, must be reinforced with bars of a granite, aluminum, high density polyurethane foam.
If the taps are to be installed directly in the top, it is advisable to add a reinforcing pad under the top in the point where the hole has been drilled. Be careful as the pad must be positioned so as to enable free movements of the top.
Bonding the top To bond porcelain stoneware parts (i.e. joints
Over time the structure may settle slightly.
between vertical and horizontal pieces), use a
We therefore recommend periodically
two-part epoxy resin in the same color as the
checking the level of the cabinet
ceramics. Remove any excess two-part resin
supporting the top, and adjusting the feet
before it hardens. To bond the top to the
usually provided on the base of the
structure use an flexible adhesive (i.e. silicone).
cabinet.
For joints between set-in elements and the top use a transparent flexible adhesive (i.e. silicone) or the gaskets supplied with the basin or appliance.
INSTALLING THE KITCHEN TOP Installing the kitchen top We always recommend to position an insulating panel over the dishwasher or under the worktop. All tops and islands made with 12 mm (0.48 in) slabs can be installed with a projection. We also recommend to make a 3-4 mm (0.12 / 0.16 in) radius around the slab edges. It is recommended to position a supporting strip under the points where the 12 mm (0.48 in) slabs are matched in 50 mm (2.0 in) wide laminar structures and to make sure that the strip has the same thickness.
Kitchen top
Furniture
Comfortable to the most extreme factors and conditions, OSLO Tiles Sintered Surfaces combine the elegance of the most exclusive designs with the most advanced technical features offering a personallised service for the most demanding residential and commercial projects.
15 MM
EDGE
°
°
L
JOINT POSSIBILITIES
45°