2018-2019 CFR Brochure

Photo: Ryen Dunford. Rider: Denver Debes

2019 BRO-SURE

Since 99

Tunnel Racks 4

Direct Tunnel Mounts 12

Handle Bars

Bag Division

Bracket Kits

Handle bar parts 22

8

13

16

Accessories

26

CFR Apparel

28

Photo:DB. Riders: Brad Slack, Chris Ankeny

2

cheetahfactoryracing.com

20 years in the making.

CFR is a grassroots company that was started by passionate mountain people who demanded more out of their gear in the backcountry. Modern snowmobiling has evolved but with it has grown a gap between accessories that are needed and what is available. CFR strives to fill that gap with innovative and durable products that are created and tested to meet the highest level of performance, so you never miss the moment because of crappy gear.

cheetahfactoryracing.com

3

Tunnel Racks & Bags CFR Tunnel Racks are designed to be strong, durable and lightweight, they are intended to work with CFR Bracket Kits to carry snowboards, powsurfers, and skis.

The racks are also useful to strap on other essentials such as tripods, ice augers, guns or whatever your trip design calls for. The CFR Dime Bags and CFR QP Bags are specially designed to fit inside our racks and allow you the freedom to pack all your trip essentials, wherever you go.

Photo: Tim Grey. Riders: Brandon Peterson, Paul Poohkay

4

cheetahfactoryracing.com

cheetahfactoryracing.com

5

TUNNEL RACKS LINK-IT-UP®

Part No. TRO7

- Flat Black -Ghost White

The CFR LINK-IT-UP® Rack is the latest evolution in our rack making technology! The LINK-IT-UP® Rack enables you to put on or take off your rack quickly, using the Ski-Doo LinQ removable brackets. All CFR bracket kits and bags are compatible with the LINK-IT-UP® rack. *LinQ Cargo Base Kits and fasteners are not included*

LinQ Cargo Base Kit Part No. TR7.1

These 4 Cargo Base Kits are designed to be installed using the 8 factory holes on the rear tunnel of Ski-Doo snowmobiles (all hardware included). When used with the Linq fasteners it allows tool-less installation or removal of the Link-It-Up Rack. *Ski-Doo LinQ Brackets are not included.* Includes: • 4 Ski-Doo Cargo Base Kits.

• All hardware to attach Cargo Base Kits to snowmobile tunnel.

Part No. TRO7.5

LinQ Fastener Part No. TR7.2

These 4 Ski-Doo LinQ cargo fasteners are designed to be attached to the CFR Link-It-Up Rack (all hardware included).

When installed and used with the LinQ Cargo Base Kit, it allows tool-less installation or removal of the Link-It-Up Rack.

Includes: • 4 Ski-Doo Cargo LinQ Fasteners.

• All hardware to attach fasteners to the CFR Link-It-Up rack.

Photos left to right: DB, Leyland, Grey, Slack

6

cheetahfactoryracing.com

TUNNEL RACKS Mountain Rack - Flat Black - Ghost White - Orange Crush - Monster Green

The CFR Mountain Rack lets you carry extra gear/gas on the back of your snowmobile.

The lightweight, low profile design of the Mountain Rack is very strong and built to last.

Snowboards, powsurfers, and ski brackets can still be used on each side of the rack.

Expedition Rack

Part No. TRO4.1

Part No. TRO4.2

Part No. TRO4

Part No. TRO4.3 The CFR Connect System does not work with the Mountain rack.

- Flat Black

The CFR Expedition Rack is ready for most anything. You can carry twice the amount of gear on those big days or overnight trips. Snowboards, powsurfers, and ski brackets can still be mounted on each side of the rack as well. (Requires a 153� tunnel or longer). The CFR QP bag and dime bag also fit great in the Expedition rack.

Part No. TRO5

iRack 2.0 - Flat Black - Ghost White

Part No. TRO6.5

The iRack 2.0 is the hybrid rack of the Mountain and iRack. Its bigger carrying capacity allows you to carry more gear as well as any two Bracket Kits (sold separately). The Bracket mounting holes are farther apart on this rack, securing skis and snowboards better than ever.

The iRack2.0’s lower profile keeps skis and or snowboards lower and closer to the snowmobile. The lightweight, yet strong design is almost bombproof.

Rack Wraps

Part No. TRO6 *The CFR Connect System works perfectly on this revolutionary rack.*

Available for all of our Tunnel Racks. CFR Rack Wraps are 21mm printed graphic with laminate.

Custom options available, look good and match your sled wrap!

cheetahfactoryracing.com

7

BAG DIVISION Dime Bag

Part No. B01

The CFR Dime Bag has Velcro strips that wrap around all of our tunnel rack’s tubular bars to keep the bag locked in place. The waterproof zipper on the outside will keep your contents dry. The inside waterproof pocket is perfect for your wallet and the key hook keeps your keys in the right place.

Dime Bag Features:

• Professionally used and approved by Dan Treadway and Travis Rice.

• 10 liters of waterproof carrying capacity.

• 3 layer laminate construction with waterproof zippers.

• Designed specifically to be used in all CFR Tunnel racks.

• Inside pocket for holding wallet and other valuables.

• Attached key hook keeps keys in a safe place.

• CFR snow/Ice scraper included.

• YKK Zippers and thicker stitching on all bags.

QP Bag

Part No. B02

The CFR QP Bag offers 25 liters of waterproof carrying capacity and fits snugly in all of the CFR rack systems. The QP is a telescoping bag that doubles in size with a quick zipper extension to carry up to 50 liters of gear.

Features: • Cordura waterproof fabric.

• Waterproof zippers.

• 25 liter capacity. Un-zip the extension and up to 50 liters of capacity are possible.

• Clips into all CFR rack systems and is easily removable.

• Shovel holder enables quick access on the top.

• Convenient carrying handle.

• Individual inside pocket.

• New YKK Zippers and thicker stitching on all bags.

NEW zippers with thicker stitching!

8

cheetahfactoryracing.com

BAG DIVISION Buck Bag CFR Buck Bag lets you empty your jacket and snowpants pockets while keeping all of your go-to stuff in one spot.

9� of clearance is needed on XM snowmobiles between the top of the bag to the DESS switch. If clearance is not available the bag can knock the DESS switch out when executing sharp turns. Otherwise, the DESS switch can be relocated if you still want to rock the Buck!

Features: - 7 external pockets and 2 internal pockets.

- External pockets ready for OEM manfactures heater bars, (heaters not included).

Part No. B03

Super Strap Part No. 1013 The CFR super strap is a must have for your set up. This handy strap allows you to fasten pretty much anything to your rack or back pack. With a super strap and duct tape you can pretty much get through anything.

Tunnel Armor

Part No. 1014

The CFR Tunnel armor is designed to prevent ski tips from rubbing against the side of your snowmobile tunnel. The 3M backing will stick to pretty much anything, and the hard durometer ribbed rubber top is strong and long lasting.

The Tunnel Armor comes stock with the Boardski Bracket and Dual Ski Bracket Kit.

Snow Scraper Part No. 1012 The CFR snow scraper is a must have multi-tool. From clearing the snow and ice off of your running boards to scraping the snow and ice off of your snowboard or ski base. The CFR Ice Scraper is available to buy separately or comes in all Dime and QP Bags.

cheetahfactoryracing.com

9

Bracket Kits and Tunnel Mounts.

For 20 years we’ve been perfecting our system for attaching skis, snowboards, and powsurfers to your snowmobile. It brings us a huge amount of satisfaction when we sit back and dream about the countless powder turns that have been enjoyed by snowriders who are using our system. Get your powder weapon to the top worry-free and have a blast on the way up and down!

g.

Photo: DB. Rider: Dave Treadway

10

cheetahfactoryracing.com

cheetahfactoryracing.com

11

DIRECT TUNNEL MOUNTS Single Ski Bracket System (DTM)

-Black Part No. M02-B -Red Part No. M02-R

This ski rack carries a ski and pole on each side of most snowmobiles. This system cannot be used with other bracket systems.

Metal Snowboard Rack System (DTM)

-Black Part No. M01-B -Red Part No. M01-R

This snowboard rack carries a snowboard securely on the side of most snowmobiles.

Another bracket system can be used on the other side of the snowmobile.

Boardski Bracket System (DTM)

-Black Part No. M03-B -Red Part No. M03-R

The Boardski Bracket System bolts directly to the side of 2008-16 SkiDoo snowmobiles. Using this bracket allows you to to carry a snowboard or a pair of skis and poles securely on your snowmobile. Another bracket system can be used on the other side of the snowmobile.

Blades Add a little more metal to the rear tunnel of your snowmobile. The CFR XP/XM/ Gen 4 Blades are designed to be fastened to the outside or inside rear tunnel of your Ski-Doo snowmobile. Blades add 50% more strength to the rear tunnel. The XP/XM/Gen 4 Blades are recommended if you travel on bumpy roads carrying lots of extra weight on the rear tunnel of your snowmobile. Blades also available for Arctic Cat M series 2005-2008 and Yamaha Nytros as well.

SKI DOO REV GEN 4

Features: -Anatomically designed to fit the rear tunnel -Blades all come in anodized black.

-Comes with 1 right/1 left side and stainless steel rivets.

-Made in Canada.

-Anodized Black Skidoo XP, XM

NEW!

-165 ..........................Part no. TS08 -154 ......................... Part no. TS08.5 -175 ..........................Part no. TS08.6

12

-146............................................. Part no. TS01 -154............................................. Part no. TS02 -163............................................. Part no. TS03 -174.............................................. Part no. TS07 Yamaha Nytro.......................... Part no. TS04 Arctic Cat M-Series............ Part no. TS06

cheetahfactoryracing.com

BRACKET KITS Powsurf Bracket Kit We worked with Grassroots founder Jeremy Jenson to design this bracket kit to carry his revolutionary pow surfers. The CFR Pow Surf Bracket Kit carries one Pow Surfer on the side of one of our Tunnel Racks (sold separately). Another Bracket Kit can be purchased for the other side.

-Black Part No. K05-B -Red Part No. K05-R

Snowboard Bracket Kit The CFR Snowboard Bracket kit carries one snowboard on the side of one of our Tunnel Racks (sold separately). Another Bracket Kit can be purchased for the other side.

-Black Part No. K01-B -Red Part No. K01-R

Board/Ski Bracket Kit Like it both ways? The CFR Boardski Bracket Kit carries one snowboard or one pair of skis and poles, on one side of our Tunnel Racks (sold separately). Another Bracket Kit can be purchased for the other side. Tunnel Armor included.

Tunnel Armor included.

-Black Part No. K04-B -Red Part No. K04-R

Dual Ski Bracket Kit The CFR Dual Ski Bracket Kit carries a pair of skis and poles on the side of one of our tunnel racks (sold separately). Another Bracket Kit can be used on the other side.

Tunnel Armor included.

-Black Part No. K02-B -Red Part No. K02-R

Single Ski Bracket The CFR Single Ski Bracket kit carries a ski and pole on each side of one of our Tunnel Racks (sold separately). No other bracket kits can be used.

-Black Part No. K03-B -Red Part No. K03-R cheetahfactoryracing.com

13

Handlebars

The CFR control division spawned out of the need for increased performance and reliability from stock handle bars. People have different needs and wants when it comes to power sport control and we are continually expanding our line to accompany these desires.

Photo: Tim Grey

HANDLEBARS Boondocker 2.0 The Boondocker 2.0 is bent as an all-around boondock, hill climbing, jump and tandeming handlebar. The 38° degree angulation on the end of the bars keep your hands from slipping off. The 10° degree forward bend is more comfortable for the wrists when your hands are on the handlebar ends.

-Flat Black

Part No. CD1.5

-Ghost White

Part No. CD3.5

-Hot Pink

Part No. CD12

-Blood Red

Part No. CD3.6

-Baby Blue

Part No. CD3.8

-Fluro Orange

Part No. CD3.7

16

cheetahfactoryracing.com

HANDLEBARS Turcotte Bar The Brett Turcotte signature bar is the handlebar of choice for Brett to accomplish his mind-blowing snowmobile stunts.

From the snowcross track to the backcountry, Brett is a Jedi of our sport and this handlebar his lightsaber! Brett was using his Signature handlebar at the 2018 Winter X-Games where he won 2 Gold Medals, in Snowmobile Air And Style, and Snowmobile Freestyle!

-Flat Black

Part No. CD13.2

-Fluro Green

Part No. CD13

-Ghost White

Part No. CD13.1

-True Gold

Part No. CD13.4

-Purple Haze

Part No. CD13.3

“The most important part of my sled is the controls: my office, you could say! Since working with CFR to develop the perfect all around handlebar, I’ve never had to worry about failure, whether I’m rolling my sled over in pow, or throwing whips upside down, I know my bars are going to take a beating and keep me stoked day after day!”

Photo: Tim Grey

cheetahfactoryracing.com

17

HANDLEBARS Crowbar The Crowbar is a non-oversized, 7/8� diameter snowmobile handlebar, from end to end. No different riser or adapter needed to run these on your stock setup. The 7075 aircraft aluminum helps to keep them straight when things go sideways.

The Crowbar bend works for hill climbing, boondocking, ditch banging, water crossing, and most any other situations you get into when snowmobiling.

-Flat Black

Part No. CD15

-Banana Yellow

Part No. CD15.2

-Orange Crush

Part No. CD15.3

-White Part No. CD15.1

Photo: Tim Grey. Rider: Ben Bernasconi

18

cheetahfactoryracing.com

HANDLEBARS Brown Bar Chris Brown is one of the best all-around snowmobilers in the business. We are beyond stoked to work with Chris to develop this Polaris specific handlebar. No adapter needed, you can throw these 7/8” bars on your stock Polaris clamp!

Along with its bombproof 7075 aircraft aluminum, the 28.5” width, 6 degree bend, 11 degree pullback, and 5” rise make the Chris Brown Signature Bar super smooth and comfortable to use.

-Flat Black

Part No. CD40

-Blood Red

Part No. CD40.2

-Ghost White

Part No. CD40.1

“I wanted a bar that is designed for technical riding but strong enough to take anything I throw at it.”

cheetahfactoryracing.com

19

HANDLEBARS SX The SX Bar is CFR’s First Snowbike specific handlebar. The New SX snowbike handlebar was tested and Approved by Cory Derpak and the MAG Silver Star Team.

Photo: Mason Mashon. Rider: Cory Derpak

-Flat Black

Part No. CD41

-Banana Yellow

Part No. CD41.2

-Orange Crush

Part No. CD41.3

-Blue

Part No. CD41.4

*Made from 7075 Heat treated super Aluminum with flex technology. *Strong, Light weight and built to last!*Better positioning than stock bars and way stronger! *The new design dissipates bumpy conditions better than stock bars keeping you fresh and riding longer! *Vertical and horizontal positioning graphics for perfect centering and pull back angulation. *Custom graphics in Four color ways. Flat Black, Banana Yellow, Orange crush, or Blue Bird. *The SX bar is an oversized 1 1/8” in the center. A 7/8” to 1 1/8” adapter might be needed depending on the snowbike riser you have*

20

cheetahfactoryracing.com

Team

The best in the biz create and test our stuff.

Andreas Bergmark (Sled) Andrew Munster (Sled) Brett Turcotte (Sled) Caleb Kesterke (Sled) Charles Reid (Snowboard) Chris Brown (Sled) Chris Logan (Ski) Cody Borchers (Sled) Cody Hunt (Sled) Cody Mcnolty (Sled) Cody Townsend (Ski) Cory Davis (Sled) Cory Derpak (SX) Denver Debes (Sled) Duncan Lee (Sled, Photo) John Jackson (Snowboard) Jon Jean (Sled) Josh Penner (Sled) Julie-Ann Chapman (Sled) Kalle “KJ” Johansson (Sled) Khan Yong Gee (Sled) Kye Peterson (Ski) Maria Sandberg (Sled) Mark Abma (Ski) Mikey Rencz (Snowboard) Nadine Overwater (Sled) Parker White (Ski) Riley Suhan (Sled) Seth Morrison (Ski) Travis Rice (Snowboard) Wiley Miller (Ski)

Photos by: Serfas, Dunford, Grey, Basterachea, Slack, Mashon, Best

cheetahfactoryracing.com

21

HANDLEBARS Knucks Risers 2” RISER

BLACK-CD29 BLUE- CD29.5 GOLD-CD29.1 PURPLE-CD29.2

6” RISER

BLACK- CD09 BLUE- CD09.5 GOLD- CD09.1 PURPLE-CD09.2

Black

3” RISER

BLACK-CD28 BLUE-CD28.5 GOLD-CD28.6 PURPLE CD28.7

7” RISER

BLACK- CD10 BLUE- CD10.5 GOLD- CD10.1 PURPLE-CD10.2

4” RISER

BLACK- CD07 BLUE- CD07.5 GOLD- CD07.1 PURPLE-CD07.2

5” RISER

BLACK- CD08 BLUE- CD08.5 GOLD- CD08.1 PURPLE-CD08.2

Blue

8” RISER

BLACK- CD11 BLUE- CD11.5 GOLD- CD11.1 PURPLE-CD11.2

Gold

- CNC machined from high strength 6061 - T06 aluminum.

- Graphics are laser etched for a durable long lasting look.

- Anodized black, blue, gold and purple finish.

- Available in 2,3,4,5,6,7 and 8” inch heights.

- Will work with either 1-1/8” tapered bar or 7/8” bar (adapter included).

- Patent pending 7/8” anti slip insert keeps bars where you want them.

- Designed to be used with the CFR Boondocker/Rooster/Turcotte/SX and Crow handlebars.

- Made in Whistler, BC Canada.

Purple

Grips CFR snowmobile grips are injection molded with super tacky rubber. The ultra thin diameter rubber compound will fit over your handlebar heater elements, and give you optimum handlebar feel and response.

Features: • Standard grips are 6 3/4” long.

• Nice diamond grip surface.

• Compatible with hand warmers.

• Fits over tapered and steel handlebar hooks.

• Sold per pair.

GRIPS (6 3/4”) BLACK RED ORANGE YELLOW GREEN GHOST WHITE HOT PINK PURPLE BLUE

CD20 CD21 CD22 CD23 CD24 CD26 CD27 CD 20.2 CD 20.5

New!

New!

Polaris GRIPS (5 1/8”) BLACK

CD20.1

22

cheetahfactoryracing.com

HANDLEBARS Part No. CD18

Hand Warmers Universal high powered grip heaters that work on all snowmobiles.

Mountain Strap Bendable The CFR bendable Mountain Strap works great to get out of sticky situations and for tandem snowmobiling. The soft compound allows for a greater mobility of strap. New pre-bent mounting brackets, with stainless hardware, wrap securely on the handlebar to prevent slippage.

Part No. CD16

Polaris Mountain Strap The Fabcraft Polaris Mountain strap is designed to be attached to the Chris Brown Handlebar. The Mountain strap is made from an extremely elastic compound with threaded bolts built into the ends. All hardware is included to attach to the crossbar of the Chris Brown Handlebar.

New!

Part No. CD16.1

Ridgid Mountain Strap The CFR Rigid Mountain Strap is made for sledders wanting a solid grabbing point on their snowmobile handlebars. The rigid strap fastens to most handlebars using the CFR bar nuts. The bar nut mount fastens to the bars tightly not allowing slippage.

Part No. CD16.5

Bar Nuts CFR Bar Nuts allow you to mount your Ski-Doo grab strap to any handlebar. Two forged aluminum brackets connect to your handlebar for a solid connection, without slippage. (The strap is not included).

Part No. CD50

cheetahfactoryracing.com

23

HANDLEBARS Oversize Bar Adaptor Allows 7/8� risers to accommodate oversize 1 1/8� handlebars.

Gold CD17.1

Flat Black CD17

Blue CD17.5

Purple CD17.2

Bar Pad The CFR bar pads are designed to fit all CFR handlebars or any oversized large diameter handlebars. The dual density foam will protect against sharp corners and hardware on riser. The Cordura material with CFR logos is long lasting and can withstand cold temps and all of the abuse that comes with snowmobiling.

Baby Blue

Ghost White

Monster Green Part No. CD30

Part No. CD30.4

Blood Red

Part No. CD30.2

Hot Pink

Blacked Out New!

Part No. CD30.8 Part No. CD30.1

Purple

New!

Part No. CD30.3

Orange

New!

Polaris Pad Part No. CD30.7

Part No. CD30.5

Part No. CD30.6

24

cheetahfactoryracing.com

HANDLEBARS Tube Adaptor

Part No. CD19

5-1/2” tube converts stock flat style steering post to a pivot style steering post when using a pivoting style handlebar riser.

• Super strong Chromoly Steel.

• Attaches to stock handlebar clamps or any 7/8” handlebar attachment.

• Positions pivoting style risers on outside of stock handlebar clamps.

Arctic Cat Adjustable Post Delete Kit

Part No. CD25

This kit allows you to use your stock steering post and removes the height adjustable feature off your Arctic Cat snowmobile. Simply cut below the adjustable part of your steering post and install the new T style billet block (step by step directions included). You will also need to get a riser (height of your choice). Eliminates 90% of the slop found in the stock adjustable post and saves over 1lb, depending on the height of risers you choose.

The Cluster Relocate - Ski Doo Gen4— Part No. CD28 - Ski Doo XM— Part No. CD28.1 - Knucks Riser— Part No. CD28.3 CD28

Clean up your handlebar controls and move them out of the way with this easily installed relocator.

CD28.3

CD28.3

cheetahfactoryracing.com

CD28

CD28.1

25

SCRATCHERS Part No. S01

Scratchers The OTTP snow scratchers kick up snow and ice into the Hi-Faxes and cooling vents of your snowmobile. The snow and ice keep the snowmobile motor cool and prevents overheating on icy, early morning approaches. Snow on the track/rail connection prevents melting and premature wearing of your Hi-Faxes. When not in use you simply place them over the rail.

Part No. S02

Reversible Scratchers

The OTTP reversible snow scratchers are the best scratchers you can buy. They kick up twice as much snow than regular snow scratchers and if you accidentally forget about them and go in reverse, they won’t break or bend. Snow scratchers kick up snow and ice into the Hi-Faxes and cooling vents of your snowmobile. The snow and ice keep the snowmobile motor cool and prevents overheating on icy early morning approaches. Snow on the track/rail connection prevents melting and premature wearing of your Hi-Faxes. When not in use you simply place them onto the included scratcher rail supports.

Photo:db. Rider: Jon J and the rad dad club

Photo: Aaron Leyland Rider: Chris Brown

26

cheetahfactoryracing.com

Ladder Strap

SPARE PARTS

Part No. 1003

The CFR 220mm ladder strap is injection molded from super strong nylon. This replacement strap works on all of our snowboard and ski brackets.

Replacement Strap - 16” Strap— Part No. 1002 - 8” Strap— Part No. 1001 The CFR 8” and 16” straps are injection molded with super strong nylon. These straps will replace any strap used in our snowboard and ski racks.

Aluminium Ratchets

Part No. 1006

The CFR Aluminum Ratchet is built specifically to take the abuse snowmobiling throws at it. These custom made ratchets are designed to hold your snowboard or skis down solid until you need them no matter what! The powder-coated black finish will keep them rust free and looking good. Thicker springs are long lasting and will give you years of trouble free use.

-This ratchet will replace all CFR ratchets current and past.

Stickers: 12 Pack The CFR sticker pack comes with an assortment of different sizes and colors of high quality stickers.

Part No. ST01

Package contents: • 4 CFR Classic skull stickers • 3 CFR OG Die Cuts • 2 CFR MTN Saw Die Cuts • 2 Goat Skull Die Cuts • 1 CFR BC Logo Die Cut

Large Stickers

Part No. ST02

Large 9” X 8” XL Die Cut Decals Choose between: • -Skull Logo (White) • -Skull Logo (Red) • -Skull Logo (Black) • -BC Logo (White) • -BC Logo (Red)

cheetahfactoryracing.com

27

SoftGoods

Cool, comfortable clothes. That’s what we want and that’s what we make.

Photo: Tim Grey. Riders: Riley Suhan, Kayli Dentman

cheetahfactoryracing.com

SOFT GOODS

Goat Skull

Tee Front

Tee Side

Long Sleeve Front

Long Sleeve Side

Hoodie Side

Hoodie Back

Long Sleeve Back

Goat Skull Foam Trucker Hat

Hoodie Side

Hoodie Back

Mountain Saw

Hoodie Front

Tee Front

Tee Front

cheetahfactoryracing.com

Tee Side

Long Sleeve Front

29

Long Sleeve Side

Mountain Saw Foam Trucker Hat

SOFT GOODS BC Logo

Long Sleeve Front

Long Sleeve Side

Tee Front

Long Sleeve Front

Long Sleeve Side

Tee Front

Tee Side

Tee Front

Tee Side

Tee Front

Tee Side

Tee Side

Mountain Line

Tee Front

Tee Side

Hoodie Front

Hoodie Back

Foam Truck Hat

30

cheetahfactoryracing.com

SOFT GOODS Kell ‘Em All Series

Tee Front

Tee Side

Long Sleeve

Long Sleeve Side

Hoodie Front

Hoodie Back

Original

Long Sleeve Front

Long Sleeve Side

Tee Front

Tee Side

W Tee Front

W Tee Side

Ladies

W Tee Front

W Tee Side

Foam Trucker Hats

cheetahfactoryracing.com

31

20 years in the making.

CHEETAH FACTORY RACING PO Box 93 Pemberton, BC V0N2L1 Canada 1300 Boblett St Unit A 3584 Blaine WA 98230 United States

604-894-1880

dave@cheetahfactoryracing.com

Photo: Mason Mashon photo: Blake Jorgenson