23-24 CFR Bro Sure

BroSure W24

HOW TO PICK A HANDLEBAR SET UP WHICH RACK SHOULD YOU CHOOSE? FTP riser RT BAg Hero Grips Photo: TGFG_ Location: Revlestoke, BC Rider: Khan Yong Gee

Handlebars | Risers | Grips | Racks | Accessories | Wearables

IGNITION

WHY Cfr?

Ever since I first took a snowmobile into the Whistler backcountry in 1999 I’ve been obsessed with the idea of making every day out there just a little bit better. Over more than 2 decades, that obsession has led to everything from designing the innovative snowboard and ski racks that continue to define the sector, to releasing our extensive range of handlebars and controls to enhance the performance of your sled. This winter, we’re proud to unveil our new direct-mount FTP Riser for Polaris snowmobiles; available in six rises and six colors so you can dial in the cockpit feel and look of your new Polaris sled. Our all-new RT Bag takes our years of experience designing tunnel bags and delivers our most accessible yet waterproof bag, with bomber TPU coated fabric and quality YKK #10 waterproof zips. Finally, I’ve been wanting a thinner, more supple grip and the hero grip is the result.

The combination of being compatible with the SDG handlebars and being ultra thin gives you the ultimate connection to the machine.

The thinner grip also really reduces your fatigue over long days so you can ride further and longer.

- Dave Basterrechea

Photo: Chad Chomlack Location: Alaska, USA

@cheetah_snow

2

cheetahfactoryracing.com

@Cheetah_snow @Cheetah_bars @Cheetah_racks @Cheetah_Reels @Cheetah_motos cheetahfactoryracing.com

3

@cheetah_snow

How to Pick a Snowmobile Handlebar Set Up ALL ABOUT THE FEEL

Finding the perfect feeling cockpit is a liberating experience! The enhanced comfort and control of a custom CFR setup can unlock the true capabilities of both sled and rider, reducing fatigue and wear on the body while allowing you to execute technical moves with less effort and more precision. Enhance your connection to your machine by choosing a setup that best matches your body type, height and riding style. We believe having your hands at the optimum height and angle is one of the most crucial positive changes you can make to the handling of your stock snowmobile. Use this guide to help you get started and as always, reach out to us if you have any questions or just want a recommendation. vertically from your steering post 1. Determine Your Desired TOTAL RIDE HEIGHT Measured mount to your handle bar grips.

Do you want:

Lower than stock?

Same as stock?

Higher than stock?

Typical Ride Height Desires LOW

MEDIUM

Technical Trees Dynamic Maneuvers Seated Riding

HIGH Aerial Jumping

Stand Up Riding

Tandem Riding

Zac Oh

TGFG_

TGFG_

TGFG_

Leyland

TGFG_

Example of Some Common OEM Ride Heights 2024 Polaris Matryx Low Medium High

@cheetah_snow

4” 5” 6”

Ski-Doo Expert Summit_X Freeride

5.7” 7.5” 7.5”

4

Arctic Cat Alpha_One

6.5”

Lynx Shredder Shredder

RE DS

6.7” 5.7”

cheetahfactoryracing.com

HOW TO PICK A HANDLEBAR SET UP 2. Choose a Bar 2.1. Pick Your DIAMETER STOCK

Oversized bars give you a strength and stiffness advantage when compared to a stock bar.

If you want to use your stock riser then you will need a stock diameter 7/8” sized bar.

7/8” MisFit / 29’Er / Crowbar

OVERSIZED

11/8” Misfit / Kesterke / Turcotte /Munster Boondocker 2.0 / Rooster 2.0

2.2. Pick Your RISE 1/2”

1”

MisFit

29’er / Crowbar

Bar rise is the bend upward in a bar. Bar flex is a big consideration when considering your rise as the higher the rise, the more flex you will get.

Typically people who want a really responsive bar will keep their rise to a minimum.

0”

1/2”

1”

2”

Rooster 2.0

MisFit

Kesterke Turcotte Munster

Boondocker 2.0

28”

29”

2.5. Pick Your Width 28”

29”

30”

MisFit

29’Er

Crowbar

Bar width affects hand, elbow and shoulder positioning and feel. The trend these days is towards more narrow set ups that are more responsive to the most dynamic kind of riding. Tandem riders may want more width.

Body stature also plays an important role: taller, larger people may want more width but not all do. Shorter people may want a narrower bar.

MisFit Rooster 2.0

Kesterke Munster

30” Boondocker 2.0 Turcotte

2.3. Pick Your SWEEP 12°

14°

MisFit 29’Er

Crowbar

Determining your sweep, also called ‘pullback’ is all about comfort. Jumpers will typically like less sweep because it forces a rider to be in a more aggressive stance with elbows over the wrists to brace for big impacts.

We always recommend comfort as a guide and the way to choose the proper sweep is to figure out where and how your wrists intersect with the bar when riding.

14°

12° MisFit Turcotte Kesterke

Munster Rooster 2.0 Boondocker 2.0

2.4. Pick Your GRIP SIZE SDG

Standard

MisFit 29’Er

Crowbar

Grip size can affect stability and arm pump. Some people prefer to have more to hold on to and some prefer less. SDG or Small Diameter Grips have less girth and possibly take less energy to hold on to. .

look for this symbol MisFit

SDG

Standard

MisFit Kesterke

Munster Rooster 2.0 Boondocker 2.0 Turcotte

Munster

cheetahfactoryracing.com

5

@cheetah_snow

HOW TO PICK A HANDLEBAR SET UP 3. Pick Your RISERS 3.1 What Steering Post Do You Have?

SKI-DOO ARCTIC CAT LYNX

Flat

POLARIS

FTP

T Post Knucks

T Post Adapter Knucks +

4. Add Accessories FLAT STEERING POST

KNUCKS 4” OR ABOVE

SKI-DOO XM

See page 21 for more info

mounts underneath the flat top steering post

SKI-DOO GEN 4 / GEN 5

See page 21 for more info

FTP CLUSTER RELOCATE

4.2. Handlebar Heaters Pick according to your Sled model on pg. 26

4.3. Grips REGULAR GRIP BAR

SMALL DIAMETER GRIP BAR HERO GRIPS

SIGNATURE GRIPS

4.4. Bar Pad 7/8” BAR CROW BAR PAD

@cheetah_snow

SKI DOO STOCK MOUNTAIN STRAP

MINIMALIST

NARROW BAR PAD

6

MOST PROTECTION See page 24 for more info

BAR PAD

cheetahfactoryracing.com

SHRED CREW

SET UP Over the past 6 years riding for Cheetah I have had the opportunity to try many different setups. Each season my bar setups have been put through hell and back and not once have they bent or broke, which is a huge priority for me when in the backcountry. Over the past few seasons I have locked down my favorite setup with the 3’riser on the 1” Munster bar. I love the added control and maneuverability of a 29” wide bar and I make it a priority when picking a bar setup.

@kEETERBAWS Base: lake country, BC sled: lynx Shredder DS 154

Favorite:

Smashing through Trees Hitting Cliffs Pillow Lines

CFR kit:

Munster bar 3” Knucks riser Moto Bar pad

KEaton

Roper ADVICE ON PICKING A CFR SET UP Get out there and try different setups on the sled you ride. Everyone has a different build and riding style and it’s important to find something that naturally feels good for you. Buying a pair of bars because the color looks cool is one thing but finding the bend and rise that gives you more control and reduces fatigue after a weekend of riding is the key.

Photos: Kaleb Weston Location: Monashee Mountains, BC

cheetahfactoryracing.com

7

SHRED CREW

SET UP I have been running my exact CFR set up for four seasons now and it literally feels like I’m on the same machine, controls wise, every time I set it up on a new sled. The 2” riser paired with the 1” rise of the Munster bar is the perfect height for me to have full control and leverage for my style of riding.

I also really like the 29” width of the Munster bar as it gives more strength in my upper body due to my shoulders being closer together. Another huge factor as to why this set up works for me, is the durability and strength of CFR bars. With my aggressive style of riding I need the toughest control set up in the industry.

@khanyonggee Base: Mabel lake BC sled: Polaris 155 9R Khaos Favorite:

technical tree riding Big mountain descents Juicy sends

CFR kit:

Khan

Munster bar 2” Knucks riser T post Adapter Bar pad soft mountain strap

Yong gee

ADVICE ON PICKING A CFR SET UP First of all, think about what type of riding you like to do and how your current set up is working for you, what adjustments do you feel you need to make to improve your riding? For me, a lower set up gives me more weight over the front of the machine which maximizes my control and effort up front of the machine. Second think of how far apart you want your arms while riding. Finally, think about all those rad colours CFR has to help you customize your ride. Now get out there and shred!!

Photos: TGFG_ Location: Revelstoke, BC

cheetahfactoryracing.com cheetahfactoryracing.com @cheetah_snow

8

@cheetah_snow cheetahfactoryracing.com

HANDLEBARS CFR Snowmobile Bar Spec Sheet Diameter

Rise (in inches)

7/8”

1 1/8”

0 0.5

Misfit

X

X

X

29’ER

X

Crowbar

X

1

Sweep (in degrees) 2

X

12

X

28

X

X

X

X

X

X

X

X

Turcotte

X

X

Munster

X

X

Boondocks 2.0

X

Rooster 2.0

X

X X

X

29

X

X

X X

Standard

Width (in inches)

SDG

X

Kesterke

Grip Size 14

X

X X

X

X

X

X

X

30

X X X X

two sizes The Misfit bar was made for those who want a narrower, suppler handlebar with SDG (Small Diameter Grips). The Misfit has a ½” rise to dampen the bar and the grip area is tapered by 2mm. Smaller riders, and pretty much everyone with smaller hands will enjoy this bar tremendously. Aggressive tree riders also seem to really like this bar. The Misfit bar is available in both regular and oversized diameters to accommodate both stock and oversized clamps.

Bar Specs.

• • • • •

28” Wide 1/2” Rise SDG Grip 12 Degree pull back 3 Degree Up.

11/8 ” White CD600 Pink CD601 Green CD604

7/8 ”

1 White CD602 Pink CD603 Green CD605

cheetahfactoryracing.com

9

@cheetah_snow

HANDLEBARS

The Crowbar is a non-oversized, 7/8” diameter snowmobile handlebar, which means no different riser or adapter is needed to run these on your stock setup. The 7075 aircraft aluminum helps to keep them straight when things go sideways.

The Crowbar bend works for hill climbing, boondocking, ditch banging, water crossing, and most any other situations you get into when snowmobiling.

7/8 ” Black CD15

Banana Yellow

Orange Crush

White

Matte Tan

CD15.2

CD15.3

CD15.1

CD15.5

Crowbar Pad for 7/8” bars

30” 1” HOOK 10°

14°

7/8”

The Crowbar pad is for 7/8” non-oversized handlebars. Works great on the Crowbar, 29ER and the new Misfit SD handlebar. The softer durometer rubber will soften the blow of an unexpected hit. The pad graphics will add some style to your handlebars.

Riding Style: Trail, Trees, Mountain, Catching Air Strength: Flex: LOW

MED

HIGH

White

Black

Andrew had been cutting down his Boondockers to a 29” width and asked if we could make him a custom bar so he didn’t have to cut his bar down. We went to the drawing board and designed the Munster Bar. We wanted everyone riding all different brands to be able to use this handlebar so we dropped the height to 1” which allows the clamping space to be wide enough to work with all brands and still gives enough room on the handlebars for all of your controls. A great all around riding handlebar with less width for a more responsive powerful feeling in tight situations. The narrow width allows the snowmobile to be thrown around easier for riders with a narrower shoulder width or riders who prefer a narrower handlebar.

11/8 ”

Hot Pink

Flat Black

Blue Bird

CD99.2

CD99

CD99.4

29” 1” HOOK 10°

14°

1 1/8”

Riding Style: Trail, Trees, Mountain, Catching Air Strength: Flex: LOW

MED

White CD99.3

HIGH

Leyland

@cheetah_snow

10

cheetahfactoryracing.com

Red

HANDLEBARS

The Boondocker 2.0 is our most popular bar for a reason; it’s got the perfect combination of comfort and control. Things happen when snowmobiling and by using 7075 aircraft aluminum, the Boondocker strength is twice that of stock bars and provides an even better feel of what’s going on. The bar features a 2” quick rise, extending from an oversized, 1 1/8” midsection, which leads to a natural 14° sweep for your arms and wrists. The control response is lively yet damp and the 30” wide Boondocker 2.0 bar has the width necessary for all your controls. The 10° degree forward hook is there for added support in moments of maximum extension and is the extra bit you need during technical tandem riding.

It is important to note the Boondocker is an oversized 1 1/8” in the center. A 7/8” to 1 1/8” adapter or a different riser that accepts oversized handlebars might be needed depending on the snowmobile riser you have.

11/8 ” Matte Brown CD3.16

Gun Metal Grey CD3.15

Hot Pink

Ghost White

Fluro Orange

Green

Purple

Baby Blue

Flat Black

Blood Red

CD12

CD3.5

CD3.7

CD3.9

CD3.4

CD3.8

CD1.5

CD3.6

2” HOOK 10°

30” 14°

Riding Style: Trail, Trees, Mountain, Catching Air Strength: Flex:

1 1/8”

LOW

The Rooster 2.0 is a re-vamped version of our original straight bar.

This bar suits a smaller rider that doesn’t want more height in their stance. Hill climbers are fond of this bar as is anyone with a narrow shoulder width. The clamp width is 1 1/8” and will require an oversized adapter to fit stock risers.

11/8 ”

0”

28” 12°

Hot Pink CD301v

1 1/8”

MED

HIGH

The SX Bar is CFR’s first snowbike specific handlebar. Made from 7075 heat treated super aluminum with flex technology. Strong, light weight and built to last! Better positioning than stock bars and way stronger! The new design dissipates bumpy conditions better than stock bars while keeping you fresh and riding longer! Vertical and horizontal positioning graphics for perfect centering and pull back angulation. Custom graphics in five color ways. Flat Black, Banana Yellow, Orange Crush, or Blue Bird. The SX bar is an oversized 1 1/8” in the center. A 7/8” to 1 1/8” adapter might be needed depending on the snowbike riser you have.

Flat Black CD300

White CD302

Riding Style: Trail, Trees, Mountain, Catching Air Strength: Flex: LOW

MED

HIGH

3”

Black

Banana Yellow

Blue Bird

Raw

CD13.7

CD13.6

CD13.11

CD13.11

30”

1 1/8”

Riding Style: Trail, Trees, Mountain, Catching Air Strength: Flex: LOW

MED

14°

cheetahfactoryracing.com

11

@cheetah_snow

HIGH

HANDLEBARS The CFR 29ER bar is a leader in our 7/8” diameter line up. With an overall width of 29” and a 12 degree pullback the 29ER bar will help you easily navigate through tricky tight terrain. The 29ER is manufactured with SDG (Smaller Diameter Grip) which tapers the grip area by 2mm for a rider who prefers a smaller grip on their handlebar. The 29ER bar will work with most stock risers with no different risers or oversized adapter needed. We use the same 7075 aircraft aluminum as in all of our other handlebars, creating a very strong, great feeling snowmobile handlebar.

7/8 ” Flat Black CD500

Red

Gun Metal Grey

Purple

CD501

CD502

CD503

Products Specs: • • • • • • • • • •

7/8” diameter at the clamp (Works on most stock risers) SDG (Smaller diameter grip area) 1” rise 7° upward bend 12° pull back 40° downward bend J-hooks 29” width QR technology Made from 7075 heat-treated super aluminum with flex technology.

Strong, lightweight and built to last.

Riding style: Trail, Trees, Mountain, Catching Air Strength: Flex: LOW

MED

HIGH

“The perfect bar for a

no hassle swap and feels oh so right in your hands. Light, strong, and the perfect bend!”

Sean McCaig:

PROFESSIONAL SNOWMOBILE GUIDE

@cheetah_snow

12

Photos: TGFG_ Location: Chatter Creek

cheetahfactoryracing.com

HANDLEBARS

Caleb’s dedication and passion continues to push the sport of snowmobiling and his new bar is a reflection of that passion, with no detail overlooked in the pursuit of progression. Caleb’s aggressive riding style required the strongest bar possible so we started by making it oversized 1 1/8” out of 7075 aerospace-grade aluminum. The width of a handlebar determines the stability and agility; too wide will feel slow and sluggish and too narrow will be unstable and sketchy. The 29” width Caleb chose gives the best combination of both quickness and stability. The handto-handlebar connection is one of the most important and overlooked things when snowmobiling. The thinner the grip area, the better the connection and control. Using thin gloves and no hand warmers is one way to allow for a small diameter grip area but cold hands can ruin your day. The Kesterke Signature bars have SDG (smaller diameter grip) which tapers the grip area by 2mm so grip heaters and grips can still be used while retaining a thinner grip feel.

The 1” rise of the CK handlebar gives you just the right amount of flex in the bar and allows all of your controls to fit. Slap on one of the best graphics packages in the lineup and boom, there ya go!

11/8 ”

Teal on Black CD3.15

Flat Black

29” 1”

12°

1 1/8”

Riding style: Trail, Trees, Mountain, Catching Air Strength: Flex: LOW

MED

CD400

HIGH

Caleb kesterke

PROFESSIONAL SNOWMOBILER

@proven_progression Base: Missoula, Montana Height: 5’11”

Riding style: Aggressive Technical Freeriding sleds:

155” Polaris Boost, 155” 9R

CFR kit:

Kesterke bar 2” FTP riser Bar pad Photos: Issac Kesterke

cheetahfactoryracing.com

13

@cheetah_snow

The fire in me still burns.

After all this time.

After all the ups, and all the downs, My passion is what fuels my dreams.

I always want to push myself.

I always want more.

I always want to satisfy my own ability.

I know this chance won’t last forever, And the hands of time are ticking.

But when I look back, I want to have no regrets.

Everything I’ve done has brought me this moment.

My dreams are more real than ever, And I am here, living them out.

It’s time to take what’s mine.

It’s time to Reach Beyond.

Photos: Dalby Location: Golden, BC

Reach Beyond is a new video series by Brett Turcotte.

Scan the QR code to watch the teaser and join the journey.

HANDLEBARS

The Turcotte bar gives you instant access to the cockpit of one of the most progressive riders on the planet. This oversized bar is built with a single focus on progression leading performances. When you’re flying through the sky with a 500lb machine above your head and you’re only hanging on to a set of bars, you had better believe you want those bars to work properly. The Turcotte bars have a 30” width and 12º sweep with a 1” rise coming from an oversized 1 1/8” midsection. This is a strong bar that is not meant to flex and is the choice handlebar for Brett and his aggressive riding style.

30” 1”

1 1/8”

12°

Products Specs: • • •

Riding Style: Trail, Trees, Mountain, Catching Air Strength: Flex:

1” rise 5° upward bend 12° pull back

• • • •

Black

White

Red

CD13.7

CD13.8

CD13.6

True Gold

Purple Haze

CD13.9

CD13.3

LOW

MED

HIGH

40° downward bend J-hooks 30” width QR technology Made from 7075 heat-treated super aluminum with flex technology.

“This is definitely the best all around set up I’ve ever found. It’s a fairly flat feeling bar, with only 2.25” of total rise (bar+riser). It’s very nimble in the trees and great overall.”

@turcotte16

Photo: TGFG_ Locations: Revelstoke BC / Stoked Riding Clinic

cheetahfactoryracing.com

15

@cheetah_snow

SHRED CREW

Jamie

iwaschuk @iwasjamie

Base: Blue River, BC sled:

154’ ArCtic Cat HArdcore

Favorite: technical Trees jumps and drops exploring

SET UP Personally I like the lower bar for tree riding it lets me use more of my shoulders and back to move the sled around.

This setup works good for me because the bars are low enough that I have the control I need but high enough that I have the leverage to make it easy to get the sled to where I need it to be.

CFR kit: 4” Knucks riser Misfit bar Moto bar pad Signature Grips

Photos: TGFG_ Location: Purcell Mountains, BC

ADVICE The handle bar set up makes the sled. If you go too high with the bars, the sled will tend to high-side you and when you’re too low, the sled will be harder to get on edge. If the bars are too wide for what you’re doing, it will be harder to get over on tricky side hills. There’s a happy medium with everything. With my Arctic Cats I swap the steering out from vertical to the lay-down because it fits my riding style better and I find I have better control. If I run the stock vertical post I switch to a 2” riser. Always make sure when you stand on your sled that your knees are bent and your shoulders are over your bars - not behind them. @cheetah_snow

16

cheetahfactoryracing.com

CHEETAH MOTOS Quality you can feel.

Photos: TGFG_

SHOP NOW

CFR bars are all about the feel. Experience the joy of premium control from gripping a quality, oversized bar that is responsive, durable and dampens the bumps. When you choose to install these new Hard Enduro bars on your whip, you’re investing in all the lessons we’ve learned from the snow and have translated them to a quality, dirtbike product. 7050 aluminum with tapered wall thicknesses combined with 8 degree upward bend and 12 degree backward sweep, deliver a quality you can feel so you can ride your best.

3 rises - 4 colorways

Austrian Orange

Blood Red

1” / 25mm

Ghost White

Gun Metal Grey

2” / 50mm

800mm

3” / 76mm

800mm

25mm

800mm

50mm

76mm

Moto Bar Pad - small

Moto Bar Pad For ultimate protection, wrap your bars up with our extra dense Moto Bar Pad. Good for bars with no hand guards or hand guards that mount to the bar.

Blackout

@cheetah_motos

Austiran Austrian Orange Orange

Blood Red

The New CFR Small bar pad are designed to just cover the essentials. Perfect if you need a pad that works with riser mounted hand guards or just prefer a low profile pad. This bar pad also features a 3D relief of Ts’zil / Mt Currie on each side.

White Blackout

Austiran Orange

Blood Red

White

cheetahfactoryracing.com

RISERS

RISERS The new CFR FTP riser is designed to be used on Polaris snowmobiles with a flat top Products Specs: steering post. Its wide stance contributes to less bar flex for more control. This clean, • CNC machined from high strength 6061 - T06 aluminum. modern design replaces the need for a T-post or Pivot Tube Adapter. The FTP creates • 1.5” FTP allows for lowest possible setup in the snowmobile industry (with Rooster). a distinctive look and a stronger connection for the Polaris cockpit.

• Tumbled, anodized and laser-etched for a durable finish.

• Will work with all 1-1/8” oversized handlebars.

Available in 6 different rises and 6 different colors.

• Built for use with our Misfit, Kesterke, Boondocker, Turcotte, Rooster or Munster Bar.

Black

Blue

Red

Purple

Gold

Teal

1.5” RISER 2.0” RISER 2.5” RISER BLACK- CD705 BLACK- CD700 BLACK- CD701 GOLD- CD705.1 GOLD- CD700.1 GOLD- CD701.1 PURPLE-CD705.2 PURPLE-CD700.2 PURPLE-CD701.2 BLUE- CD705.3 BLUE- CD700.3 BLUE- CD701.3 TEAL- CD705.4 TEAL- CD700.4 TEAL- CD701.4 RED- CD705.5 RED- CD700 .5 RED- CD701.5

3.0” RISER 3.5” RISER 4.0” RISER BLACK- CD702 BLACK- CD703 BLACK- CD704 GOLD- CD702.1 GOLD- CD703.1 GOLD- CD704.1 PURPLE-CD702.2 PURPLE-CD703.2 PURPLE-CD704.2 BLUE- CD702.3 BLUE- CD703.3 BLUE- CD704.3 TEAL- CD702.4 TEAL- CD703.4 TEAL- CD704.4 RED- CD702.5 RED- CD703 .5 RED- CD704.5 @cheetah_snow

Photos: Issac Kesterke Rider: Caleb Kesterke

18

cheetahfactoryracing.com

RISERS

ULTIMATE POLARIS COCKPIT Blacked Out Bar Pad Misfit Bar

2” FTP Riser Polaris Relocate Hero Grips

“I ran the FTP riser all spring and put it through the ringer tree riding, and jumping. I was impressed with the design and found it a great upgrade over the knucks. It eliminates the need for a post adapter and bolts directly to the steering post. This cleans it up, makes it stronger, lighter and keeps the steering post and riser aligned no matter how hard you land or how bad you crash.” - Caleb Kesterke

Photo: Issac Kesterke Rider: Caleb Kesterke

Polaris Relocate Our Polaris Relocates are designed to be used in conjunction with our new FTP risers, but they can be used on any stock Polaris sled with a flat top steering post. Remove your reverse button and kill switch from your bars for the cleanest look. Parts are CNC machined from strong yet light 6061-T06 aluminum and anodized black and tumble finished. The graphics are laser etched for a clean & durable look. Sold as a pair.

cheetahfactoryracing.com

19

@cheetah_snow

RISERS

Knucks Risers The Knucks handlebar risers are ideal to personally customize the height of your handlebars and the look of your sled.

Machined from high strength, super-tough 6061 - T06 aluminum they can take anything you can throw at them. The tumbled, anodized finish in a range of colors adds style to your steed and the laser-etched graphics are not just for looks, with a centering line on the top cap allowing you to adjust your handlebars to where you want them. The Knucks come in 1.25”, 2”, 2.5”, 3”, 3.5”, 4”, 5”, 6”, 7” and 8” heights and accept both stock 7/8” or oversized 1 1/8” bars thanks to the integral adapters.

Black

Blue

1.25” RISER 2” RISER

Gold

2.5” RISER 3” RISER

Purple

3.5” RISER

BLACK- CD60 BLUE- CD60.1 GOLD- CD60.2 PURPLE-CD60.3

BLACK-CD29 BLACK-CD29.4 BLUE- CD29.5 GOLD-CD29.1 PURPLE-CD29.2 RED - CD29.3

BLACK-CD28 BLACK-CD28.1 BLUE-CD28.5 GOLD-CD28.6 PURPLE CD28.7 RED CD28.8

4” RISER

5” RISER

7” RISER

BLACK- CD07 BLUE- CD07.5 GOLD- CD07.1 PURPLE-CD07.2 RED-CD07.3

6” RISER

Red

8” RISER

BLACK- CD08 BLACK- CD09 BLACK- CD10 BLACK- CD11 BLUE- CD08.5 BLUE- CD09.5 BLUE- CD10.5 BLUE- CD11.5 GOLD- CD08.1 GOLD- CD09.1 GOLD- CD10.1 GOLD- CD11.1 PURPLE-CD08.2 PURPLE-CD09.2 PURPLE-CD10.2 PURPLE-CD11.2 RED-CD08.3 RED-CD09.3

- CNC machined from high strength 6061 - T06 aluminum.

- Graphics are laser etched for a durable long lasting look.

- Anodized black, blue, gold and purple finish.

- Will work with either 1-1/8” tapered bar or 7/8” bar (adapter included).

- Patent pending 7/8” anti slip insert keeps bars where you want them.

- Designed specifically to be used with our entire handlebar line up and all stock and other after market handlebars.

Photo: James Cole Location: Lake Tahoe, CA

@cheetah_snow

20

cheetahfactoryracing.com

SHRED CREW

Duncan

Lee

@theduncan775 Base: Lake Tahoe / Truckee CA sled: Skidoo turbo R 154 Favorite:

burning a full tank plus the caddy, wheelies, long decents, finding features to blast off, and i will always love jumping.

CFR kit:

Boondocker 2.0 Bar 3” Knucks riser Signature Grip Bar Pad 2.0

ADVICE ON PICKING A CFR SET UP What body position do you want to be in while riding? If you’re an aggressive rider then you will have your knees bent and in an attack position so you need your controls to allow you to be there and be comfortable. Think about where you want your weight to be on the machine and how the height of the bars can help you get there. There are a bunch of different widths now, so think about how this can give you leverage, stability, and how it lines up with your shoulders, the nice thing is with so many options you can find the perfect fit. Once you have the shape and riser height dialed in, you can add some pop with all the different color choices. cheetahfactoryracing.com cheetahfactoryracing.com

Photos: James Cole Location: Lake Tahoe, CA

21

21

@cheetah_snow @cheetah_snow

RISER ACCESSORIES Tube Adapter

5-1/2” tube converts stock flat style steering post to a pivot style steering post when using a pivoting style handlebar riser.

• Super strong chromoly steel.

• Attaches to stock handlebar clamps or any 7/8” handlebar attachment.

• Positions pivoting style risers on outside of stock handlebar clamps.

Part No. CD19

Polaris Bar Mount Cap

The CFR Polaris bar mount cap replaces the stock handlebar clamp for a better fitting/looking bar clamp. A stock Polaris bar clamp will not clear our 1.25” Knucks risers, but the new CFR bar mount cap eliminates this issue, allowing for the lowest possible cockpit setup on a Polaris snowmobile.

Part No. CD19.75

Polaris T Post The CFR Polaris T-Post adapter bolts on your factory Polaris flat post. Made from 6065 Aluminum and CNC’d to perfection. Using the CFR Polaris T-Post adapter allows you to install our knucks risers directly to your T-Post for a solid connection with fewer parts.

Part No. CD19.5

Arctic Cat Adjustable Post Delete Kit This kit allows you to use your stock steering post and removes the height adjustable feature off your Arctic Cat snowmobile. Simply cut below the adjustable part of your steering post and install the new T style billet block (step by step directions included). You will also need to get a riser (height of your choice). Eliminates 90% of the slop found in the stock adjustable post and saves over 1lb, depending on the height of risers you choose.

Part No. CD25

7/8” Anti-Slip Adapters These adapters come in the Knucks risers to make them compatible with 7/8” handlebars. These are replacement rings if you lose the ones that come with your knucks.

Part No. CD11.3

The Cluster Relocate - Ski Doo Gen4— Part No. CD28 - Ski Doo XM— Part No. CD28.1 - Knucks Riser— Part No. CD28.3 CD28

Clean up your handlebar controls and move them out of the way with this easily installed relocator.

CD28.3

@cheetah_snow

CD28.3

CD28

CD28.1

22

cheetahfactoryracing.com

SHRED CREW

SET UP When people ask about how to get the right set up I say there isn’t a perfect first set up because they may have to fine tune after riding awhile.

Key point is when standing on sled you want your knees with a slight bend and also your elbows bent. You never want both straight. That is very important so that you are able to take impacts of any kind and also puts you in more control. Also having a lower bar set up may feel off at first but once a person gets used to it you won’t wanna change. You will have way more control of the sled and less negative feedback from the skis.

@nmader800 Base: Revelstoke BC sled:

155’ Polaris 9R

Height: 6’1”

Riding Style: technical Trees

Nic

backcountry freestyle

Mader

CFR kit: Large bar pad Signature Grips Munster bar 2” riser T Post Adapter

ADVICE ON PICKING A CFR SET UP “I like a really aggressive stance when I’m riding and therefore I picked a 2” riser. I’m 6’1” and depending on how you ride I’d probably recommend a 2.5” or higher. I used to run a 3inch riser but as my riding progressed I dropped to a 2inch which gave me even more control in technical trees and also when progressing into 270 flips, re-entry’s. ”

Photos: TGFG_ Location: Revelstoke, BC

cheetahfactoryracing.com

23

@cheetah_snow

BAR PADS Shane Roy

Narrow Bar Pad Our Narrow Bar Pad is a low profile offering that fits between a mountain strap, especially on a new Doo. The pad is made of high density foam and is wrapped with a tough Cordura top with a rubber logo. Velcro on the bottom latches the pad to the bar.

Blacked Out

Blue

Green

Orange

CD31.8

CD31.4

CD31.6

CD31.5

Pink

Purple

Red

White

CD31.2

CD31.7

CD31.3

CD31.1

Bar Pad The CFR bar pads are designed to fit all CFR handlebars or any oversized large diameter handlebars. The dual density foam will protect against sharp corners and hardware on riser. The Cordura material with CFR logos is long lasting and can withstand cold temps and all of the abuse that comes with snowmobiling.

Baby Blue

Part No. CD30.4

Blood Red

Part No. CD30.1

Purple

Monster Green

Ghost White

Part No. CD30.2

Hot Pink

Part No. CD30

@cheetah_snow

The Crowbar pad is for 7/8” non-oversized Handlebars.

Works great on the Crowbar, 29ER and the new Misfit SD handlebar. The softer durometer rubber will soften the blow of an unexpected hit. The pad graphics will add some style to your handlebars.

Blacked Out

Part No. CD30.8

Part No. CD30.3

Orange

Part No. CD30.5

Crowbar Pad for 7/8” bars

Polaris Pad Part No. CD30.7

Part No. CD30.6 24

cheetahfactoryracing.com

HANDLEBAR ACCESSORIES

GRIPS

Signature Grip

We are stoked to have a whole rainbow of colorways for the Signature Grip line. The signature grip graphics are designed to provide superior grip with no snow or ice build-up. The graphics not only look good but provide comfort and grip so your hands stay right where you want them. The Signature Grip fits all regular sized handlebars (Hero Grips are made for SDG bars).

Features: • Functional graphics for maximum grip performance.

• Compatible with hand warmers.

• Fits over straight end or handlebars that have pre bent hooks.

• 6”/ 150mm - Length • Sold per pair

Signature Grips

BLACK PURPLE BLUE RED ORANGE YELLOW GREEN WHITE HOT PINK GREY

Hero Grips The New CFR Hero grip is the stickiest grip on the market. The soft Durometer rubber keeps your hands where you want them.

Designed only to be used with our smaller diameter grip (SDG) handlebar.

Features: • 6” (150mm) length • Compatible with hand warmers • Long enough to fit over J hooks • Sold per pair

HERO GRIPS

BLACK PURPLE BLUE RED ORANGE FLURO ORANGE YELLOW GREEN WHITE HOTPINK GREY

not shown

CD210 CD211 CD 212 CD213 CD214 CD215 CD216 CD217 CD218 CD219 CD220

cheetahfactoryracing.com

25

@cheetah_snow

CD200 CD201 CD202 CD203 CD204 CD205 CD206 CD 207 CD 208 CD209

HANDLEBAR ACCESSORIES Handlebar Heaters OEM HB Heaters

Generic HB Heaters

SKI DOO XM CURVED ENDS PP- CD18.2 SKI DOO GEN 4 CURVED ENDS PP- CD18.3 POLARIS 850 CURVED ENDS PP- CD18.4 POLARIS 850 SQUARE ENDS PP- CD18.85 POLARIS 800 CURVED ENDS PP- CD18.6 POLARIS 800 SQUARE ENDS PP- CD18.7

GENERIC-CURVED ENDS- CD18 GENERIC-SQUARE ENDS- CD18.1

Oversize Bar Adapter Allows 7/8” risers to accommodate oversize 1 1/8” handlebars. You’ll want a set of these if you are buying any of our oversized 1 1/8” handlebars and wanting to use your stock risers.

Flat Black CD17

Purple CD17.2

Mountain Strap Adapter The CFR Mountain strap adapter allows you to attach your Ski Doo Mountain strap (2017 - Current) directly to the top clamps of your Knucks Risers for more of a stock look. ** Mountain Strap is not included **

Gold CD17.1

Bar Nuts

Blue CD17.5

Soft Mountain Strap

CFR Bar Nuts allow you to mount your Ski-Doo grab strap to any handlebar. Two forged aluminum brackets connect to your handlebar for a solid connection, without slippage. (The strap is not included).

The Soft Mountain Strap offers greater strap mobility compared to a rigid strap and is a great price.

Part No. CD50 Part No. CD50.1 Part No. CD16

Blue Polaris Mountain Strap The Fabcraft Polaris Mountain Strap is designed to be attached to the Chris Brown Handlebar. The Mountain Strap is made from an extremely elastic compound with threaded bolts built into the ends. All hardware is included to attach to the crossbar of the Chris Brown Handlebar.

Rigid Mountain Strap The CFR Rigid Mountain strap is the perfect tool for tricky maneuvers, Getting your sled unstuck and tandem (Double up snowmobiling). The low-profile bar clasps easily and installs in tight areas using minimal precious bar space.

Part No. CD16.1 Part No. CD16.75

@cheetah_snow

26

cheetahfactoryracing.com

TUNNEL RACKS How to Pick a RACK HARD MOUNTED TO TUNNEL

LINQ SYSTEM

Permanent Ski Doo / Lynx

Removable Ski Doo / Lynx

Polaris / Arctic Cat

Polaris Matryx

Standard Brackets

2.0 Brackets

PreDrilled- Polaris T Slot - Polaris Link Link Adapter plates Adapter plates

16” Stealth (XL, L , S)

LINK IT UP 2.0

SNOWBOARD XL, Large, Small

See page 30 for more info

iRack 2.0

Mountain Rack

Standard Brackets

Mountain Rack Narrow

SKI XL, Large, (Small not recommended)

Expedition Rack

2.0 Brackets

15” Stealth ( L , S) *XL Stealth rack is not recommended for Matryx tunnels.

cheetahfactoryracing.com

Axys

*XL Link It Up rack is not recommended for Matryx tunnels.

27

@cheetah_snow

TUNNEL RACKS

2.0 STEALTH RACK For those who want the rack hard mounted to their tunnel. The Stealth rack mounting plates have pre-drilled holes engineered to fit the factory hole pattern of both Ski Doo and Polaris snowmobiles. *The revolutionary Boardski Bracket Kit 2.0 and Pow Surf Bracket Kit 2.0 work on all sizes of the Stealth rack for carrying skis, snowboards, Pow surfers and gear. *The side plates are stamped from 3mm thick aerospace aluminum and bolted together with 20mm tubes to create a bomb-proof rack which will stay looking good for years thanks to the hard-wearing anodized finish. *Our QP, Dime and new RT bags will fit inside all sizes of the Stealth rack. *The Small Stealth rack takes a small amount of space on the rear tunnel allowing other accessories to be used on the rear tunnel. It is not recommended for carrying skis. *The Large and Extra Large Stealth racks are designed for bigger carrying capacities. *The stealth rack comes in 3 sizes and is availabe in two different widths.

16” width for Ski Doo / Lynx and 15” width for Polaris, Arctic cat and Yamaha Snowmobiles.

Small Rack 16” -TR09 15” -TR09.1

Large Rack 16” -TR09.2 15” -TR09.3

XL Rack 16” -TR09.4 15” -TR09.5 *XL Stealth rack is not recommended for Matryx tunnels.

T-Slot ADP100

Polaris Linq Adapter Plates

Pre-drilled

ADP101 The CFR Adapter plates works on both Polaris tunnels with accessory channels and the new Matryx tunnel with factory holes.

When installed the plates allow Ski Doo cargo base kits to be used.

Once the cargo bases are installed the CFR Link It Up Racks can be used on your Polaris snowmobile. The CFR Link It Up racks are removable on the fly. No tools required to take the rack on or off.

These plates come in pairs, one plate for each side.

The CFR adapter plates work on Polaris rear tunnels with the Factory Accessory Channels. When installed the plates allow Ski Doo cargo base kits to be used. Once the cargo bases are installed the CFR Link It Up Racks can be used on your Polaris snowmobile. The CFR Link It Up racks are removable on the fly. No tools required to take the rack on or off. These plates come in pairs, one plate for each side.

@cheetah_snow

28

cheetahfactoryracing.com

TUNNEL RACKS

2.0 LINK IT UP RACK The CFR 2.0 Link It Up Rack is the next generation of removable on-the-fly snowmobile rack systems. The new bolted together design allows the rack to be easily assembled and can be configured for different carrying capacities. The new Link it up Rack 2.0 comes in 3 different sizes. Small, Large and XL. Small Rack 2 mounting points (one on each side of the tunnel.)

14 1/8” Long x 16 5/8” Wide Large Rack 4 mounting points (two on each side of the tunnel.)

20 15/16” Long x 16 5/8” Wide

Small Rack TR 08.0

XL Rack 4 mounting points (two on each side of the tunnel.)

Designed to carry extra large loads.

26 7/8” Long x 16 5/8” Wide Large Rack TR 08.5

**Each Link it Up 2.0 Rack requires 2-4 Linq Cargo Base Kits (TR7.1) and Fasteners (TR7.2) to mount to your sled, sold separately. **Ski-Doo LinQ Fasteners are not included.

XL Rack TR 08.75 *XL Link It Up rack is not recommended for Matryx tunnels.

2.0 RACK BRACKETS

Pow Surf Brackets 2.0 K07

The CFR Link It Up Rack 2.0 uses the Link It Up 2.0 Brackets for ski ,snowboard and pow surfer carrying. These new brackets allow for vertical adjustments so that the edges of your board or skis won’t rest on your running boards. The Link It Up 2.0 brackets are ski/board compatible so there is no need to choose which system you might want, it automatically works for both ski and snowboards. The Pow Surfer Brackets are wider and a seperate product.

Link It Up 2.0 Ski/Board Brackets K06

Large Rack with skis configuration

Small Rack with a board -Bindings on the inside is optional.

cheetahfactoryracing.com

Large Rack with a board

Large Rack with skis.

-New specific poles storage on bracket.

29

Large Rack with snowboard configuration

@cheetah_snow

TUNNEL RACKS

Mountain Rack - Flat Black - Ghost White

Part No. TRO4 Part No. TRO4.1

The CFR Mountain Rack lets you carry extra gear/gas on the back of your snowmobile.

The lightweight, low profile design of the Mountain Rack is very strong and built to last.

Snowboards, powsurfers, and ski brackets can still be used on each side of the rack.

The CFR Connect System does not work with the Mountain Rack.

Expedition Rack - Flat Black Part No. TRO5

The CFR Expedition Rack is ready for most anything. You can carry twice the amount of gear on those big days or overnight trips. Snowboards, powsurfers, and ski brackets can still be mounted on each side of the rack as well. (Requires a 153” tunnel or longer). The CFR QP bag and dime bag also fit great in the Expedition rack.

iRack 2.0

- Flat Black Part No. TRO6 - Ghost White Part No. TRO6.5 The iRack 2.0 is the hybrid rack of the Mountain and iRack. Its bigger carrying capacity allows you to carry more gear as well as any two Bracket Kits (sold separately). The Bracket mounting holes are farther apart on this rack, securing skis and snowboards better than ever.

The iRack 2.0’s lower profile keeps skis and or snowboards lower and closer to the snowmobile. The lightweight, yet strong design is almost bombproof.

Blades

Add a little more metal to the rear tunnel of your snowmobile. The CFR XP/XM/ Gen 4/5 Blades are designed to be fastened to the outside or inside rear tunnel of your Ski-Doo snowmobile. Blades add 50% more strength to the rear tunnel. The XP/XM/Gen 4/5 Blades are recommended if you travel on bumpy roads carrying lots of extra weight on the rear tunnel of your snowmobile. Blades also available for Arctic Cat M series 2005-2008 and Yamaha Nytros as well.

Features: -Anatomically designed to fit the rear tunnel -Blades all come in anodized black.

-Comes with 1 right/1 left side and stainless steel rivets.

-Made in Canada. @cheetah_snow

SKI DOO REV GEN 4/ GEN 5

-165 ..........................Part no. TS08 -154 ......................... Part no. TS08.5 -175 ..........................Part no. TS08.6 30

Anodized Black Skidoo XP, XM -146............................................. Part no. TS01 -154............................................. Part no. TS02 -163............................................. Part no. TS03 -174.............................................. Part no. TS07 Yamaha Nytro.......................... Part no. TS04 Arctic Cat M-Series............ Part no. TS06

cheetahfactoryracing.com

TUNNEL RACKS

LINK IT UP RACK - Flat Black Part No. TRO7

The CFR Link It Up Rack allows you to attach and remove your snowmobile rack quickly and easily using the Ski Doo LinQ Fasteners. All CFR brackets kits and bags are compatible with the Link It Up Rack. *Each Link it Up Rack requires 4 Linq Cargo Base Kits (TR7.1) and Fasteners(TR7.2), to mount to your sled, sold separately.* *Ski-Doo LinQ Fasteners are not included.

LinQ Cargo Base Kit Part No. TR7.1

These 4 Cargo Base Kits are designed to be installed using the 8 factory holes on the rear tunnel of Ski-Doo snowmobiles (all hardware included). When used with the Linq fasteners it allows tool-less installation or removal of the Link-It-Up Rack. *Ski-Doo LinQ fasteners are not included.* Includes: • 4 Ski-Doo Cargo Base Kits.

• All hardware to attach Cargo Base Kits to snowmobile tunnel.

LinQ Fastener Part No. TR7.2

These 4 Ski-Doo LinQ cargo fasteners are designed to be attached to the CFR Link-It-Up Rack (all hardware included).

When installed and used with the LinQ Cargo Base Kit, it allows tool-less installation or removal of the Link-It-Up Rack.

Includes: • 4 Ski-Doo Cargo LinQ Fasteners.

• All hardware to attach fasteners to the CFR Link-It-Up rack.

Mountain Rack Narrow - Flat Black Part No. TR04.75 The CFR Mountain Rack-NRW is designed specifically for Polaris and Arctic-Cat snowmobiles. The 16” width and pre-drilled holes in the mounting plate fit the T-slots on the back of most Polaris snowmobiles. All of our bracket kits and our RT, QP and Dime bags also fit inside the new rack. We are constantly working on making our product line better and better. The Mountain rack is as cutting edge as it gets. The overall height of the Mountain rack is 3 3/4”. Dropping the center of mass lowers all of the weight that’s carried in the rack allowing the snowmobile to perform better under load. The CFR Mountain Racks design allows the rack to be mounted on the edge of the tunnel. This will allow OEM factory holes to be used requiring less drilling into the rear tunnel. The design is also engineered to use fewer materials than existing racks yet still be as strong.

Features: -Designed by CFR’s super team of snowmobilers, skiers, and snowboarders.

-Total rack height is only 3 3/4” high.

-Carries up to a 20L or 6 gallon jerry can.

-Carries up to two pairs of skies and or two snowboards with proper attachments.

-All mounting hardware is made from high grade stainless steel.

-Compatible with CFR Dime and QP bags

cheetahfactoryracing.com

31

Dimensions: - 16” Width - 13 1/2” Length - 3 3/4” High

@cheetah_snow

DIRECT TUNNEL MOUNTS Metal Snowboard Rack System (DTM)

This snowboard rack carries a snowboard securely on the side of most snowmobiles. Another bracket system can be used on the other side of the snowmobile.

-Black Part No. M01-B -Red Part No. M01-R

Boardski Bracket System (DTM) The Boardski Bracket System bolts directly to the side of 2008-16 Ski-Doo snowmobiles. Using this bracket allows you to to carry a snowboard or a pair of skis and poles securely on your snowmobile. Another bracket system can be used on the other side of the snowmobile.

-Black Part No. M03-B -Red Part No. M03-R

Powsurf Bracket Kit We worked with Grassroots founder Jeremy Jenson to design this bracket kit to carry his revolutionary pow surfers. The CFR Pow Surf Bracket Kit carries one Pow Surfer on the side of one of our Tunnel Racks (sold separately). Another Bracket Kit can be purchased for the other side.

-Black Part No. K05-B -Red Part No. K05-R

Snowboard Bracket Kit The CFR Snowboard Bracket kit carries one snowboard on the side of one of our Tunnel Racks (sold separately). Another Bracket Kit can be purchased for the other side.

-Black Part No. K01-B -Red Part No. K01-R

Board/Ski Bracket Kit Like it both ways? The CFR Boardski Bracket Kit carries one snowboard or one pair of skis and poles, on one side of our Tunnel Racks (sold separately). Another Bracket Kit can be purchased for the other side. Tunnel Armor included.

-Black Part No. K04-B -Red Part No. K04-R

Dual Ski Bracket Kit The CFR Dual Ski Bracket Kit carries a pair of skis and poles on the side of one of our tunnel racks (sold separately). Another Bracket Kit can be used on the other side. Tunnel Armor included.

-Black Part No. K02-B -Red Part No. K02-R

BRACKET REPLACEMENTS Front Boardski Bracket

Rear Boardski Bracket

Front Snowboard Bracket

Rear Snowboard Bracket

CFR-PK048-FB

CFR-PK048-RB

CFR-PK01B-FB

CFR-PK01B-RB

Front Dual Ski Bracket

Rear Dual Ski Bracket

Front Pow Surf Bracket

Rear Pow Surf Bracket

CFR-PK02B-FB

CFR-PK02B-RB

CFR-PK01B-FB

CFR-PK01B-RB

@cheetah_snow

32

cheetahfactoryracing.com

SHRED CREW

SET UP My 2023 sled has the Misfit Bar and 3.5” rise. I would have to say that this is my all time favorite set up. The narrow bar and SDG grips are perfect for riders who are a bit smaller.

Jenna

Napier @jennanapier Base: YellowHead County, AB sled: Ski-Doo 850 Turbo 154 Favorite:

Powder, Trees, Pillows

CFR kit:

Misfit bar 3.5” Knucks riser Small Bar pad Photos: Allen Sawchuck Location: Selkirk Mountains, BC

cheetahfactoryracing.com

33

@cheetah_snow

BAG DIVISION

RT Bag Part No. B05 The new CFR RT Bag offers 25 liters of waterproof carrying capacity and fits snugly in all of the CFR rack systems. The bag has an easy access roll top bag that doubles in size to carry up to 50 liters of gear. #10 YKK Waterproof zippers and a TPU coated tarpaulin fabric will keep your goods from getting wet.

RT Bag Features: * The Roll Top with compression straps keeps everything tight to prevent your goods from bouncing around. * Comes with hooks that wrap around the bottom bars of your rack which makes it easy to remove. * Shovel holder on the top enables a shovel to be carried on the deep days for quick access. * A quick-stash waterproof zippered top pocket, with internal zippered mesh sleeve for valuables. * A quick-access waterproof zipper opens main compartment without undoing roll top. * Convenient carrying handle.

RT BAG

@cheetah_snow

34

cheetahfactoryracing.com

BAG DIVISION Beefy #10 YKK waterproof zippers are standard on every RT, Dime and QP bag’s outside zipper. The zipper will tractor its way through ice and grime to allow you to get your gear in and out whenever you want.

Dime Bag Part No. B01 The CFR Dime Bag has Velcro strips that wrap around all of our tunnel rack’s tubular bars to keep the bag locked in place. The waterproof zipper on the outside will keep your contents dry. The inside waterproof pocket is perfect for your wallet and the key hook keeps your keys in the right place. *The #10 YKK zipper on the top is long lasting, can be opened and closed in the most demanding situations and keeps your gear dry.* Dime Bag Features:

• #10 YKK long lasting zippers on the top zipper • 10 liters of waterproof carrying capacity.

• 3 layer laminate construction with waterproof zippers.

• Designed specifically to be used in all CFR Tunnel racks.

• Inside pocket for holding wallet and other valuables.

• Attached key hook keeps keys in a safe place.

• CFR snow/Ice scraper included.

QP Bag Part No. B02 The CFR QP Bag uses Cordura straps with Fastext clips to fasten the bag to any of our tunnel racks. This method of attachment allows the bag to be easily fastened or removed from your rack. The 25 liters of waterproof carrying capacity can be doubled by unzipping the extension to carry up to 50 liters of gear. *The #10 YKK zipper on the top is long lasting, can be opened and closed in the most demanding situations and keeps your gear dry.* QP Bag Features: • #10 YKK zipper pulls with waterproof sliders are stronger and will last longer than previous zippers.

• Bag material is made from waterproof and tear resistant cordura fabric.

• 25 liters of carrying capacity. Un-Zip extension and up to 50 liters of carrying capacity is available.

• Easily fastened and removed from all CFR Tunnel racks.

• Shovel holder on top for carrying an extra shovel on the deep days.

• Convenient carrying handle.

• Individual inside pocket.

cheetahfactoryracing.com

35

@cheetah_snow

RAD EVENT Feeder 500 drag race ovAL TRACK

#feeder500 Lake Tahoe, CA April

I had another wildly successful Feeder 500 event. This year I had 77 sleds race and over 200 people attend the event. New for this year I purchased a set of “Port-A-Tree” drag lights which made the drag racing feel more “real”. All the racers said it was much more fun to have the lights and get a printed out time slip. Also new for this year I awarded points for the top 8 finishers in each class.

I put in so much work behind the scenes the past 12 months, trying to both coordinate the event and make sure I had a good running sled to race in every class. At the end of the event the points were tallied up and I won “Points Champion” with a total of 144pts.

All the late nights, busted knuckles, and money spent was worth it whether I won or lost.

But winning sure was the cherry on top.

2nd place was won by my girlfriend Adrianne Clark-Conley who had 79pts. She competed in all the women’s classes as well as 3 of the men’s classes. She was awarded our “Dorthy Mercer” award for winning “Women’s Point Champion”.

The Feeder 500 is for the racers and the community. It brings me so much joy to see everyone having a good time. I’m proud to have brought snowmobile racing back to the Lake Tahoe region. Next year I plan to add a couple of new classes. A Senior 60+ and a Women’s Pro Mod. The event has gotten big enough where I need to have it be spread out over two days. Drag Racing will be on Saturday and Oval Track will be on Sunday.

Thank you CFR for your support this past winter. Without your support, product, and time I wouldn’t be able to put on the Feeder 500. - @BenBirk

Photos: TGFG_

@cheetah_snow

36

cheetahfactoryracing.com

SPARE PARTS

Super Strap Large 22” Part No. 1013.5 Small 15” Part No. 1013 The CFR Super Strap is a must have for your set up. This handy strap allows you to fasten pretty much anything to your rack or back pack. With a super strap and duct tape you can pretty much get through anything.

Tunnel Armor Part No. 1014 The CFR Tunnel armor is designed to prevent ski tips from rubbing against the side of your snowmobile tunnel. The 3M backing will stick to pretty much anything and the hard durometer ribbed rubber top is strong and long lasting.

The Tunnel Armor comes stock with the Boardski Bracket and Dual Ski Bracket Kit.

Snow Scraper Part No. 1012 The CFR Snow Scraper is a must have multi-tool. From clearing the snow and ice off of your running boards to scraping the snow and ice off of your snowboard or ski base. The CFR Ice Scraper is available to buy separately or comes in all Dime and QP Bags.

Ladder Strap

Replacement Strap - 16” Strap— Part No. 1002 - 8” Strap— Part No. 1001

Part No. 1003

The CFR 220mm Ladder Strap is injection molded from super strong nylon. This replacement strap works on all of our snowboard and ski brackets.

The CFR 8” and 16” straps are injection molded with super strong nylon. These straps will replace any strap used in our snowboard and ski racks.

Aluminium Ratchets Part No. 1006 The CFR Aluminum Ratchet is built specifically to take the abuse snowmobiling throws at it. These custom made ratchets are designed to hold your snowboard or skis down solid until you need them no matter what! The powder-coated black finish will keep them rust free and looking good. Thicker springs are long lasting and will give you years of trouble free use.

-This ratchet will replace all CFR ratchets current and past.

Teather Clip CD 80

2.0 Rack Bolt TR08.75-17

2.0 Rack Bar 15” TR08.75-15

2.0 Rack Bar 16.5” TR08.75-16

cheetahfactoryracing.com

37

@cheetah_snow

WEARABLES Raven T

Tees A fresh batch of CFR T-shirts is just what you need to keep things looking good. We pick out the most comfortable and durable Gilden shirts we can find.

Halen T

Pow Tour T

Bear T

Race T

Bear T

Women’s Pow Tour T

@cheetah_snow

38

cheetahfactoryracing.com

WEARABLES Balaclava

These stretchy and comfortable balaclavas are tight fitting and good for helmet use. The deep collar keeps the powder out and the warmth in.

86% polyester and 14% spandex.

3D foam embroidery give these awesome snapback hats a premium look and feel.

Crew Neck

Our tried and true foam trucker hats are perhaps the most comfortable hat on the planet!

You can’t go wrong with this constant performer because the fit and price are smokin!

Hoodies Treeline Hoodie

Treeline Hoodie

Black

Green

Crew Neck Logo Grey/Blue

Logo Full Zip Hoodie

Logo Full Zip Hoodie

Camo

cheetahfactoryracing.com

Black

39

@cheetah_snow

What started as a standard testing day for the new Polaris FTP risers and Cluster Relocates, took an interesting turn when CFR product designer Trevor Hunt (pictured) and CFR owner Dave Basterrechea (photographer) found this once in a lifetime ice tunnel.

“In this committing scenario, where losing your sidehill will have you at the bottom of an ice wall, my 2” prototype FTP riser and Misfit bar gave me the easy confidence that a lower and narrower than stock cockpit can create,” -Trevor

@Cheetah_snow @Cheetah_bars @Cheetah_racks @Cheetah_Reels @Cheetah_motos Photo: Dave B Rider: Trevor Hunt

SHOP @

HFACTORYRACING.COM CHEETA@cheetah_snow

PO Box 93 Pemberton, BC V0N2L1 40 Canada

1300 Boblett St Unit A 3584 Blaine WA 98230 United States

604-894-1880

cs@cheetahfactoryracing.com cheetahfactoryracing.com