2017 dealer catalog

Snowmobile Racks And Accessories

2017

DEALER - CATALOG

Rider- Christian Gagnon Photo-Aaron Leyland

INDEX Tunnel Racks.......................................4-7 Connect ...............................................8-9 Bracket Kits ..................................12-14 Direct Tunnel Mounts.........................15 Bag Division...................................16-20 Snow Accessories..............................21 Snowmobile Control Division...22-27 Snowmobile Handlebar Risers........28 Handlebar Parts............................29-31 Scratchers............................................32 Spare Parts....................................33-34 Stickers .................................................35 CFR Apparel...................................36-39 Ramps.....................................................40

Rider- Nadia Samer

Tunnel Racks

The CFR Tunnel racks are designed to be strong yet lightweight, The signs are what makes these rack hold there own. All of our racks are boards,powsurfers and skis. The Dime bag and QP bags are designe are easily removable. The Rack line up are universal and can be use cept for the Expedition rack requires a 153" tunnel or longer).

e 3/4" X 1/16" ID Aluminum tubing and cutting edge dee designed to work with our bracket kits to carry snowed to fit inside all of our racks to keep your gear dry and ed on most snowmobiles with a 141" track or longer. (Ex-

Av Cust 21 M

Tunnel Racks

Part no. TR04

Mountain Rack -Flat Black -Ghost White -Orange Crush -Monster Green

The CFR Mountain Rack lets you carry extra gear/gas on the back of your snowmobile.The lightweight low profile design is strong and built to last. The CFR Connect system does not work with the Mountain rack.

Part no. TR04.1 Part no. TR04.2 Part no. TR04.3

Expedition Rack -Flat Black

Part no. TR05

The CFR Expedition rack is ready for

most anything. You can carry twice the amount of gear for those big days or overnight trips. Snowboards, powsurfers and ski brackets can still be used as well.

(Requires a 153" tunnel or longer)

iRack 2.0

Part no. TR06

-Flat Black -Ghost white

The new iRack 2.0 is hybrid rack of the Mountain and iRack. The bigger carrying capacity allows you to carry extra gear. Bracket kits (Sold separately) are farther apart to secure skis and snowboards better.

The lower profile keeps skis and or snowboards lower to the snowmobile. The lightweight yet strong design is almost bombproof.

The CFR Connect system works on this revolutionary new rack.

6

iRack

-Flat Black -Monster Green

Tunnel Racks Part no. TR03

The CFR iRack is tried tested and proven. This reliable and well priced rack has been in the line up for a few years now. The CFR Connect system works with the Irack as well.

Part no. TR03.2

Link Rack

Part no. TR07

-Flat Black -Ghost White

The new CFR Link rack is our latest evolution in our rack making technology! The Link rack enables you to put on or take off your rack using the Ski Doo Linq removable brackets. (Linq Brackets not included) All CFR Bracket kits and bags work on the Link rack

Rack Wraps

Available for all of our Tunnel Racks.

Custom Designed wraps with Dealer logos are available.

21 MIL Printed graphic with Laminate

Intense Wrap

Part no.RW10 Part no.RW11

Mountain Line Wrap

Part no.RW14

Part no.RW15

Part no.RW12

Part no.RW16

Part no.RW13

Part no.RW17

7

Connect System

Connect System

-The CFR Connect System enables you to take your CFR iRack on or off at whim! Four stainless steel buckles lock your rack down to your snowmobile.

-Permanent Mounting points on snowmobile are low profile stainles steel loops.

-Going lightweight and low pro drop the rack and go.

-CFR Connect only works with the CFR iRack and on Ski Doo XP and XM snowmobiles

8

Part no. C01

Connect System

9

CFR Bracket Kits and Direct Tunnel Mounts.

g.

We use A polyurethane infused with nylon to make all of our bracke day while taking a beating and still come back for more.

Our straps are injected molded and are made from super tough nylo prevent most damage.

-Features Custom made ratchets have thicker industrial springs that hold the The Mounting hardware we use is made from high grade stainless s All of Our bracket kits are designed to be attached to our tunnel rack

ets. This enables a material that can with stand the coldest winter

on that wont break in the cold but will break in severe roll overs to

ere shape and will give you years of trouble free ratcheting. steel that is super strong and will stay rust free. ks.

Bracket Kits

Snowboard Bracket Kit

Part no. K01

The CFR Snowboard bracket kit carries one snowboard on the side of our Tunnel rack (Sold separately). Another bracket Kit can be purchased for the other side.

Boardski Bracket Kit The CFR Boardski bracket Kit carries one snowboard or one pair of skis and poles on the side of one of our tunnel racks (Sold separately) Another bracket kit can be purchased for the other side.

12

Part no. K04

Bracket Kits

Pow Surf Bracket Kit

Part no. K05

We worked with grassroots founder Jeremy Jenson to design this bracket kit to carry his revolutionary pow surfers. The CFR Pow Surf Bracket Kit carries one Pow surfer on the side of one of our tunnel racks (Sold separately). Another bracket kit can be purchased for the other side.

Single Ski Bracket The CFR single ski bracket kits carry a ski and pole on each side of one of our tunnel racks (Sold separately). No other bracket kits can be used.

Part no. K03

13

Bracket Kits

Dual Ski Bracket Kit

Part no. K02

The CFR Dual Ski Bracket Kits carries a pair of skis and poles on the side of one of our tunnel racks (Sold separately). Another bracket Kit can be used on the other side.

Photo: Mason Mashon

14

Single Ski Bracket System (DTM)

Direct Tunnel Mount Kits Part no. M02

This ski rack carries a ski and pole on each side of most snowmobiles.

This system cannot be used with another bracket systems.

Metal Snowboard Rack System (DTM)

Part no. M01

This snowboard rack carries a snowboard securely on the side of most snowmobiles. Another bracket system can be used on the other side of snowmobile.

Board-Ski Bracket System (DTM)

Part no. M03

The Boardski bracket system bolts directly to the side of 08-16 ski doo snowmobiles .Using this brackets allows you to to carry a snowboard or a pair of skis and poles securely on your snowmobile.

Another bracket system can be used on the other side of snowmobile.

15

Bag Division

g.

The CFR Bag Division was developed to Utilize key spots on the snowm essentials in your backpack and pockets. Lightening up your load wh maneuvers. All of our bags are waterproof using a 3 layer laminate fa Waterproof zippers are strong for lots of trouble free zips. The 2MM s conditions you will face keeping your gear dry and accessible. Both tunnel racks.

mobile to carry much needed gear. Our goal was to only have the hen sledding and shredding is a must have for high performance abric with ripstop weaved in the outer shell for strength. YKK stitching holds the bags together to withstand the hardest winter the Dime and QP bag are designed to be used with all of our

Bag Division

Dime Bag The CFR Dime bag has Velcro strips that wrap around all of our tunnel racks tubular bars to keep the bag locked in place. The waterproof zipper on the outside will keep your contents dry. The inside waterproof pocket is perfect for your wallet and the key hook keeps your keys in the right place.

A CFR scraper comes standard in all Dime Bags so you can scrape the un wanted ice build up on your snowboard/skis and running boards. The CFR Dime Bag allows 10 cubic inches of carrying capacity. Now you can bring along your first aid kit, tow rope, siphon hoses, beverages or whatever else you might need for your winter adventures.

18

Part no. B01

Bag Division

Buck Bag

Part no. B03

CFR handlebar bag lets you empty your jacket and pant pockets keeping all of your go to stuff in one go to spot. With your jacket and pants pocket empty you can boondock your snowmobile through the trickiest terrain and side hill for miles.

9� of clearance is needed on XM snowmobiles between the top of the bag to the DESS switch. If clearance is not available the bag can knock the DESS switch out when turning sharply. Otherwise the Dess switch can be relocated if you still want to rock the buck bag if you don’t have clearance.

Features: -7 external pockets 2 internal pockets -External pockets ready for OEM manu factures heater bars, (Heaters not included)

Photo: Bryn Hughes

19

Bag Division

QP Bag The CFR QP Bag offers 25 liters of waterproof carrying capacity and fits snugly in all of the CFR tunnel racks.

The QP is a telescoping bag that doubles in size with a quick zipper extension to carry up to 50 liters of gear.

20

Part no. B02

Snow Acessories

Blades

-Anodized Black Skidoo XP, XM

-146............................................. Part no. TS01 -154............................................. Part no. TS02 -163............................................. Part no. TS03 -174.............................................. Part no. TS07

Part no. TS

Yamaha Nytro..........................Part no. TS04 Arctic Cat M-Series............ Part no. TS06

Super Strap

Part no. 1013

Tunnel Armor Part no. 1014

Snow Scraper Part no. 1012

21

Handlebars

g.

The CFR Boondocker, Turcotte, Rooster and Treadway handlebar market handlebars and Risers for snowmobiles. Our entire line u high quality 7075 double butted heat treated aluminum for a stro bar, the width is a beefy 1 1/8" thick. The handlebars then taper o around. This construction also allows energy to dissipate over a sults in a stronger handlebar that dampens hard hits and also g the snow.

Our handlebar graphic packages not only look good but are fun enable you to center your bar and get the right angulation for yo

rs and Knucks risers are now the Industry leader in afterup of handlebars are built from the inside out. We start with ong base. In the center,where the risers stem clamps to the off to 7/8" thick for all of your controls and hands to fit nicely a gradual tapering thickness within the inner core. This regives the user a better feel of whats going on underneath on

nctional as well. Vertical and horizontal positioning graphics our style of riding. No tape measure required.

Snowmobile Control Division

Turcotte Bar

-Flat Black -Monster Green -Ghost White -Specs: -2' Rise -7 Degree Up -12 Degree back -31.5 Width This Handlebar has been used and abused by Brett at his Compound and the bends are of his liking. We work closely with Brett to make sure this handlebar satisfies his needs. Brett was using his handlebar at the X-games this year where he was on the podium in the speed and style with a bronze medal. The Turcotte bar is now offered in 3 color ways with a new graphics package.

24

Part no. CD13.2 Part no. CD13 Part no. CD13.1 Rider: Brett Turcotte Photo: Tim Grey

Treadway 2.0 Bar

Snowmobile Control Division

-Flat Black -Monster Green -Ghost White

Part no. CD4.5

Specs: - 3" rise - 8 Degree Up - 14 Degree back - 31.5" Width

Part no. CD5.5

-The CFR Treadway handlebar is designed for riders who do not want hooks and there handlebars.

The 3" rise and 14 degree pull back has a more motorcycle feel and look.

Part no. CD6.5

Rider: Dan Treadway Photo: Blake Jorgenson

25

Snowmobile Control Division

Boondocker 2.0

-Flat Black -Ghost White -Hot Pink -Blood Red

-Specs: -2' Rise -7 Degree Up -12 Degree back -31.5 Width The Boondocker 2.0 is our best selling handlebar. The bends work well in all conditions. 4 Color way options to choose from.

Part no. CD1.5 Part no. CD3.5 Part no. CD12 Part no. CD3.6

Rider: Nadia Samer

26

Snowmobile Control Division

Rooster Bar

-Flat Black -Monster Green -Ghost White Specs: -0 Rise -0 Degree UP -12 Degree Up -31.5" Width

Part no. CD14

The Rooster bar works great to replace stock flat bars and maintain the same over all height. The bend work great for all riding style and conditions.

Part no. CD14.2

Part no. CD14.1

Rider: Christian Gagnon Photo: Aaron Leyland

27

Risers

Knucks Riser

Also Available in Blue

-2”Riser...................................... Part no. CD29 -3”Riser...................................... Part no. CD28 -4” Riser..................................... Part no. CD07 -5” Riser..................................... Part no. CD08 -6” Riser..................................... Part no. CD09 -7” Riser...................................... Part no. CD10 -8” Riser..................................... Part no. CD11 -CNC machined from Hi strength 6061 - T06 Aluminum -Graphics are laser etched for a durable long lasting look -Anodized black and tumbled finished -Available in 2,3,4,5,6,7 and 8" inch heights -Will work with either 1-1/8" tapered bar or 7/8" bar.

(Adapter included) -Patent pending 7/8" anti slip insert keeps bars where you want them -Designed to be used with the CFR Boondocker/Tread way/Rooster and Turcotte handlebars but will work on all handlebars.

-Made in Whistler, BC Canada

28

Handlebar Parts

Grips

-Black..................... Part no. CD20 -Fluro Red............. Part no. CD21 -Fluro Orange......Part no. CD22 -Fluro Yellow....... Part no. CD23 -Fluro Green........ Part no. CD24 -Hot Pink............... Part no. CD27 -Ghost White...... Part no. CD26

Mountain Strap

-Mounts to most handlebars to allow a spot to grab for tricky maneuvers or tandem snowmobiling.

Part no. CD16

29

Handlebar Parts

Part no. CD30

Bar Pad

Oversize Bar Adapter Allows 7/8" risers to accommodate oversize 1 1/8" handlebars.

Part no. CD17

Also Available in Blue

Hand Warmers

Universal high powered grips heaters that work on all snowmobiles.

30

Part no. CD18

Handlebar Parts

Tube Adapter

Part no. CD19

Arctic Cat Adjustable Post Delete Kit.

Part no. CD25

-5-1/2" tube converts stock flat style steering post to a pivot style steering post when using a pivoting style handlebar riser.

-Super strong Chromoly Steel.

-Attaches to stock handlebar clamps or any 7/8� handlebar attachment.

-Positions pivoting style risers on out side of stock handlebar clamps.

This kit allows you to use your stock steering post and removes the height adjustable feature off your Arctic cat snowmobile. Simply cut below adjustable part of steering post and install the new T style billet block. (Step by step directiond included) You will also need to get a riser height of your choice. Eliminates 90% of the slop found in the stock adjustable post and saves over 1 Lb depending on the height of risers you choose

The Cluster Relocate Ski-doo ........................ Part no. CD26 Arctic Cat ................... Part no. CD26.1 Clean up your handlebar controls and move them out of the way with this easily installed relocator.

31

Scratchers

Scratchers

Part no. S01

Reversable Scratchers

Part no. S02

32

Spare Parts

Aluminium Ratchet Part no. 1006

Photo: Mason Mashon

33

Spare Parts

Ladder Strap Part no. 1003

Replacement Strap Replacement strap 16" Part no. 1002 Replacement strap 8" Part no. 1001

34

Stickers

Stickers 12-Pack

Part no. ST01

Large Stickers

Part no. ST02

35

CFR Apparel

CFR T-Shirts

BC Logo

Small Medium Large X-Large

MTN Line Logo

BC Logo Black.............................Small SG01 BC Logo Black.....................Medium SG01.1 BC Logo Black.........................Large SG01.2 BC Logo Black.....................X-Large SG01.3 MTN Line Logo Black................Small-CG18 MTN Line Logo Black........Medium-CG18.1 MTN Line Logo Black............Large-CG18.2 MTN Line Logo Black........X-Large-CG18.3

Saw Logo

Mountain Saw Red....................Small-SG03 Mountain Saw Red............Medium-SG03.1 Mountain Saw Red................Large-SG03.2 Mountain Saw Red............X-Large-SG03.3 CFR Classic Logo.......................Small-SG04 CFR Classic Logo...............Medium-SG04.1 CFR Classic Logo...................Large-SG04.2 CFR Classic Logo...............X-Large-SG04.3 Goat Skull Logo..........................Small-SG05 Goat Skull Logo..................Medium-SG05.1 Goat Skull Logo......................Large-SG05.2 Goat Skull Logo..................X-Large-SG05.3

Goat Skull Logo

36

CFR Classic Logo

CFR Apparel

CFR Hoodies Text Logo Mountain Line

Mountain Saw......................Small SG12 Mountain Saw..............Medium SG12.1 Mountain Saw..................Large SG12.2 Mountain Saw..............X-Large SG12.3 Goat Skull.............................Small SG13 Goat Skull.....................Medium SG13.1 Goat Skull.........................Large SG13.2 Goat Skull.....................X-Large SG13.3 Mountain Line......................Small CG17 Mountain Line..............Medium CG17.1 Mountain Line..................Large CG17.2 Mountain Line..............X-Large CG17.3

Saw Logo

Goat Skull Logo

37

CFR Apparel

CFR Long Sleeve T-Shirts Mountain Saw Red................................Small SG07 Mountain Saw Red........................Medium SG07.1 Mountain Saw Red............................Large SG07.2 Mountain Saw Red........................X-Large SG07.3

BC Logo

BC Logo Black........................................Small SG08 BC Logo Black................................Medium SG08.1 BC Logo Black....................................Large SG08.2 BC Logo Black................................X-Large SG08.3 CFR Classic Skull Logo Black............Small SG09 CFR Classic Skull Logo Black....Medium SG09.1 CFR Classic Skull Logo Black........Large SG09.2 CFR Classic Skull Logo Black....X-Large SG09.3 CFR Goat Skull.......................................Small SG10 CFR Goat Skull...............................Medium SG10.1 CFR Goat Skull...................................Large SG10.2 CFR Goat Skull...............................X-Large SG10.3

Skull Logo

Photo/Rider : Dave b

CFR Classic Logo

Saw Logo

38

CFR Apparel

CFR Hats Clasic logo Black................................................SG14 Mountain saw Black and white.......................SG15 Mountain saw Red and White......................SG15.1 Goat Skull Black and White.............................SG16 Goat Skull Black and Red.............................SG16.1 Mountain line Red and White.......................CG16.2 Mountain line Black and Red.......................CG16.3 Model: Tim Grey Photo: Julie Ann Chapman

39

Ramps

Ramps -6 ft Ramp..................................... Part no. AR01 -7 ft Ramp...................................... Part no. AR02 -8 ft Ramp..................................... Part no. AR03

40