15-16 cheetah factory racing

2015 - 2016

Snowmobile Racks and Accessories

Photo- Bryn Hughes

INDEX

Tunnel Racks..........................................4-7 Connect ........................................................8 Bracket Kits .........................................9-12 Direct Tunnel Mounts....................13-15 Bag Division........................................16-19 Snowmobile Handlebar Risers.......25 Handlebar Accessories...............26-28 Snow Accessories.................................29 Sledwraps..................................................30 Scratchers.................................................31 Spare Parts.........................................32-33 CFR Apparel........................................34-38 Ramps..........................................................39

Photo- Mason Mashon

Tunnel Racks

Racks

Photo- Bryn Hughes Sledder-Kye Petersen

The CFR Tunnel Racks are designed to go on the back of most snowmobiles with a 141� or longer tunnel. They are made from strong yet lightweight structural tubular aluminium. The CFR Tunnel Racks are designed to carry extra fuel, backpacks, ski boots, etc. CFR also manufactures a complete line of waterproof bags that are designed to fit seamlessly with our racks to keep your extra gear dry. If you need to carry skis, snowboards or pow surfers we offer a complete line of brackets that bolt to the side of our racks to keep your equipment secure and out of your way.

4

Tunnel Racks

Mountain Rack

Flat Black

Part no. TR03 Ghost White

Part no. TR03.1

The Cheetah Factory Racing Mountain Rack is a low profile light weight weapon.

Dropping the center of mass and weight of the rack allows the snowmobile to perform better under load. Strength has not been compromised in the design and only the excess fat was trimmed to keep this rack tough as nails.

Specs: -Mounting plate lines up with Ski Doo XM snowmobiles factory holes.

-Outside Rack dimensions Height - 4" Length - 13 1/2" Width - 17" -Inside rack dimensions Length - 10 3/4" Width - 15 1/4" -Mounting plate dimensions Length - 13 1/2" Width - 2 1/2" Weight - 3.8 lbs

Monster Green

Part no. TR03.2

Crush Orange

Part no. TR03.3 5

Tunnel Racks

iRack

Flat Black

Part no. TR03.1

Ghost White Part no. TR03.2

The trusty iRack has been in the line up for the past few years. Its strong durable design has proven to take a beating and keep coming back for more. The CFR Connect was designed around the irack. The Connect allows the iRack to be taken on and off your snowmobile without any tools. (Sold separately and only available on Ski doo XM and XP snowmobiles.)

Specs: -Outside Rack dimensions Height - 4 3/4" Length - 15 1/2" Width - 16 3/4" Inside rack dimensions Length - 10 7/8" Width - 15 1/8" -Mounting plate dimensions Length - 12 1/2" Width - 2 1/2" Weight - 4 lbs

Monster Green Part no. TR03.3

Crush Orange

6

Tunnel Racks

Expedition Rack

Part no. TR05

Flat Black

Carries 2 x 20L gas cans -Designed for sleds with 154 track or longer -CFR Blades recommended Specs: Outside rack dimensions Height -4 3/4" Length -25 1/2" Inside rack dimensions Length - 20 1/2" Width -15 1/8" Mounting plate dimensions length - 24" Width 2 1/2"

Rack Wraps

-Available for both the Mountain and iRack -Custom designed wraps are available -Constructed with a thick long lasting 21MIL protective laminate over graphics

Intense Wrap

Part no.RW10 Part no.RW11

Mountain Line Wrap

Part no.RW14

Part no.RW15

Part no.RW12

Part no.RW16

Part no.RW13

Part no.RW17 -Please contact us for pricing

7

Connect System

Connect System

Photo- Matthew Mallory/joydigger.com

Connect System - The CFR Connect System enables you to take your CFR iRack on or off at whim!

- 4 Stainless steel buckles lock your rack down to your snow mobile tunnel.

- Permanent mounting points on snowmobile are low profile Stainless steel loops.

- Going lightweight and low pro,drop the rack and go.

- CFR Connect only works with the CFR iRack on Ski Doo Xp and XM Snowmobiles

8

Part no. C01

Photo- Tom Cepek

Bracket Kits

Bracket

CFR Bracket Kits are designed to be attached to the CFR Mountain Rack, iRack, DD and D Racks. Each CFR Bracket is designed to carry skis, snowboards, no boards and powder surfers. The Bracket Kits attach to the side of the CFR Racks, this allows up to two Bracket Kits on each rack.

Features

-Light weight Nylon parts are infused with resin that makes them extremely strong and can handle -100 degree cold temps.

-Custom made Injected moulded straps that wont break in the cold but will break in severe roll overs to prevent damage.

-Ratchets and Ladders are custom made for superior ratcheting capabilities.

-All mounting Hardware included is made from high grade stainless steel.

-Super strong and rust Free.

9

Bracket Kits

Boardski Bracket Kit

The Boardski Bracket Kit can carry one snowboard or one pair of skis and poles on the side of the DD, iRack or Mountain Rack.

Snowboard Bracket Kit

Part no. K04

Part no. K01

-Carries one snowboard. (Another bracket can be purchased to carry up to two snowboards).

-Specifically designed to be fastened to the CFR iRack or Mountain Rack.(Sold separately)

10

Bracket Kits

Dual Ski Bracket Kit

Part no. K02

-Carries one pair of skis and poles.

(Another Dual Ski Bracket Kit can be purchased to carry up to two pairs of skis).

-Specifically designed to be fastened to the CFR iRack or Mountain rack. (Sold separately)

Single Ski Bracket

Part no. K03

Single Ski bracket carries 1 ski and pole on each side of snowmobile -U channel keeps skis off of snowmobile.

-Specifically designed to be fastened to CFR i or Mountain rack.(Sold separately)

11

Bracket Kits

Pow Surf Bracket Kit

Part no. K05

-Used and approved by Grassroots Founder Jeremy Jensen -Carries one Snowboard or Pow Surf Board -Specifically designed to be fastened to iRack or Mountain rack

INSERT RAD PHOTO Photo- Bryn Hughes Photo- db

12

Direct Tunnel Mount Kits

Bracket Systems The CFR direct tunnel mount (DTM) rack systems are designed to be attached directly to the rear tunnel of most snowmobiles.

No other rack required.

Features

-Light weight Nylon parts are infused with resin that makes them extremely strong and can handle -100 degree cold temps.

-Custom made Injected moulded straps that wont break in the cold but will break in severe roll overs to prevent damage.

-Ratchets and Ladders are custom made for superior ratcheting capabilities.

-All mounting hardware included is made from super strong and rust free high grade stainless steel.

13

Direct Tunnel Mount Kits

Metal Snowboard Rack System (DTM)

Part no. M01

-Metal Snowboard Rack System carries one snowboard on the side of most snowmobiles.

(No other rack required)

Metal Ski Bracket System (DTM)

Part no. M02

-Metal Ski Bracket System carries one ski and pole on each side of most snowmobiles.

(No other rack required)

14

Direct Tunnel Mount Kits

Board-Ski Bracket System (DTM)

Part no. M03

-Carries either a pair of skis and poles or a snowboard -Top vertical holes line up with pre drilled Ski Doo XM’s hole pattern

Photo- Mason Mashon

15

Bag Division

Bag Division

Photo- db

The CFR Bag Division was developed to utilize certain key spots on the snowmobile to carry much needed extra gear. Our goal was to only have the essentials in your backpack and pockets. Lightening up your load when sledding and shredding is a must have for high performance maneuvers. The Bags are waterproof and can withstand the hardest winter conditions you will face, keeping your gear dry and accessible.

PhotoMason Mashon PhotoMason Mashon

16

Bag Division

Buck Bag

CFR handlebar bag lets you empty your jacket and pant pockets keeping all of stuff in one go to spot. With your jacket and pants pockets empty you can boondock your snowmobile through the trickiest terrain and side hill for miles.

Features: -Ripstop waterproof fabric.

-Waterproof zippers.

- 7 external pockets - 2 internal pockets - External pockets ready for OEM manufactures heater bars, (Heaters not included)

Part no. B03 New zippers and thicker stitching.

Sledder - Wiley Miller Photo- Bryn Hughes

Photo- db

17

Bag Division

Dime Bag

Part no. B01

The CFR Dime Bag has velcro strips that wrap around the CFR DD, i and Mountain Rack tubular bars in four spots to keep the bag locked into place.

The waterproof zipper on the outside will keep your contents dry, Inside a waterproof pocket is perfect for your wallet and the key hook keeps your keys in the right place.

A CFR scraper comes standard in all Dime Bags so you can scrape the un wanted ice build up on your snow board/skis and running boards. The CFR Dime Bag allows 10 cubic inches of carrying capacity. Now you can bring along your first aid kit, tow rope, siphon hoses, beverages or whatever else you might need for your winter adventures.

Features: -Ripstop waterproof fabric.

-Used and approved by Dan Treadway and Travis Rice.

-10 Liters of waterproof carrying capacity.

-3 layer laminate construction with waterproof zippers.

-Built in velcro straps secure the Dime Bag. -Designed specifically to be used in CFR DD, i and Mountain racks.

-Inside pocket for holding wallet and other valuables.

-Attached key hook keeps keys in a safe place.

-CFR Snow/Ice scraper included.

18

New Zippers and thicker stitching.

Bag Division QP Bag

The CFR QP Bag offers 25L of waterproof carrying capacity and fits snugly in all of the CFR rack systems.

The QP is a telescoping bag that doubles in size with a quick zipper extension to carry up to 50 liters of gear.

Features: -25 liter capacity. Unzip the extension and up to 50L of capacity are possible.

-Clips right into all CFR rack systems and is easily removable.

-Shovel holder on the top enables a shovel to be carried on the deep days for quick access.

-Convenient carrying handle.

-Individual inside pocket.

Part no. B02

New Zippers and thicker stitching.

Photo- db

Photo- db

19

Snowmobile Control Division

Snowmobile Control Divison Photo - Wally Dagg

The CFR Boondocker, Dan Treadway and Brett Turcotte handlebars along with Knucks risers are now one of the industry leaders in aftermarket handlebars and risers for snowmobiles. The CFR bars continue to change handlebar design and increase the performance of snowmobiling.This year we added the Rooster bar to offer a full range of bends to the already powder packed line up. Our entire line up of handlebars are built from the inside out. We start with high quality 7075 double butted heat treated aluminum for a strong and lightweight base. In the center, where the risers stem clamps to the bar, the width is a beefy 1 1/8” thick. The handlebars then taper to 7/8” thick for all of your handlebar controls and hands to fit nicely around. This construction also allows energy to dissipate over a gradual tapering thickness within the inner core. This results in a stronger bar that dampens hard hits and also gives the user a better feel of what’s going on underneath on the snow.

20

Snowmobile Control Division

2016 Treadway 2.0 -Flat Black -Ghost White -Monster Green

Specs: -3” Rise -8° Up -14° Back -31.5” Width Dan designed this bar around his aggressive style of riding everything that comes into his path. The 3" rise and 31.5" width of the Treadway creates a stable platform to handle anything that comes at you.

-All handle bars come with a CFR Bar Pad

Part no. CD4.5

Part no. CD6.5

Part no. CD5.5

Photo- Russell Dalby Rider- Dan Treadway

Photo- Bryn Hughes Rider- Dan Treadway

21

Snowmobile Control Division

2016 Boondocker 2.0 -Flat Black -Ghost White -Hot Pink Specs: -2” Rise -7° Up -12° Back -31.5“ Width -Designed as an all-around Boondock, hill climbing, jump and tandeming bar with 38° degree angulations on the end of the bars to keep your hands from slipping off -All handlebars come with a CFR Bar Pad

Part no. CD1.5

Part no. CD3.5

Part no. CD12

Photo- Tim Grey Photo- Bryn Hughes

22

Snowmobile Control Division

2016 Rooster Bar -Flat Black -Ghost White -Monster Green

Specs: -0” Rise -0 ° Up -12 ° Back -31.5" Width - Made from 7075 double butted heat treated Aluminum - 38 Degree bar ends.

- All CFR handlebars come with a CFR Bar Pad.

Handlebar

Part no. CD14

Part no. CD14.1

Part no. CD14.2

The NEW Rooster Bar from CFR has a fresh new graphic package along with a flat bar bend. The flat bar bend allows more space for controls, and the stock rise to be maintained when switching some OEM handlebars.

The Rooster Bar is a great handlebar for Boondocking, carving fresh powder, hillclimbing, catching big air or riding the trails. The Rooster Bar is made to last using 7075 double butted heat treated aluminum. The bend is a comfy 12° back bend, 31.5" width with a 38° bar end on each side.

Photo- Nic Alegre Sledder- Nadia Samer

23

Snowmobile Control Division

Turcotte Bar

-Monster Green Specs: -2” Rise -7 ° Up -12° Back -31.5” Width

The Brett Turcotte Signature Bar is in it second production year. We tried a few different bends out last season but Brett kept coming back to this already proven and dialed in Bar. If it aint broke dont fix it.

Designed as an all-around Boondock, hill climbing, jump and tandeming bar with 38° angulations on the end of the bars to keep your hands from slipping off.

-All handlebars come with a CFR Bar Pad.

Photo-Tim Grey

24

Part no. CD13

Photo- Tim Grey Sledder- Brett Turcotte

Risers

Knucks Riser

M.R.S.P. -2”Riser Part no. CD15 -3”Riser Part no. CD16 -4” Riser Part no. CD07 -5” Riser Part no. CD08 -6” Riser Part no. CD09 -7” Riser Part no. CD10 -8” Riser Part no. CD11 Features: -CNC machined from Hi strength 6061 - T06 aluminium -Graphics are laser etched for a durable long lasting look -Anodized and tumbled finished -Available in 2,3,4,5,6,7 and 8" inch heights -Will work with either 1-1/8" tapered bar or 7/8"bars -Adaptor included.

Patent pending 7/8" anti slip insert keeps bars where you want them -Designed to be used with the new CFR Boondocker, Treadway and Rooster Bars but will work with all handlebars -Made in Whistler, BC Canada

Now Available in 2" and 3” rise

INSERT RAD PHOTO PhotoBryn Hughes PhotoTim Grey Sledder: Kye Petersen

25

Handlebar Parts

Grips

-Black..................... Part no. CD20 -Fluro Red............. Part no. CD21 -Fluro Orange......Part no. CD22 -Fluro Yellow....... Part no. CD23 -Fluro Green........ Part no. CD24 -Ghost White....... Part no. CD26 -Hot Pink................Part no. CD27

Black Fluro Red Fluro Orange Fluro Yellow Fluro Green Ghost White Hot Pink

Photo- Tim Grey

Mountain Strap

-Mounts to most handlebars to allow a spot to grab for tricky maneuvers or tandem snowmobiling.

26

Part no. CD16

Handlebar Parts

Bar Pad

The CFR bar pads are designed to fit all CFR Handlebars or any oversized large diameter Handlebars. The Dual density foam will protect against sharp corners and hardware on riser. The Cordura material with CFR logos is long lasting and can withstand cold temps and all of the abuse that comes with snowmobiling. The CFR Bar pad comes in Black with white logos.

Part no. CD12

Oversize Bar Adapter

Allows 7/8" risers to accommodate oversize 1 1/8" handlebars

Part no. CD17

Hand Warmers

Universal high powered grip heaters that work on all snowmobiles

Photo- db

INSERT RAD PHOTO Photo- db

Part no. CD18 27

Handlebar Parts

Tube Adapter

Part no. CD19

Arctic Cat Adjustable Post Delete Kit

Part no. CD25

7/8� Tube Adapter that allows CFR Knucks risers to be used on Polaris Snowmobiles.

This kit allows you to use your stock steering post and removes the height adjustable feature off your snowmobile.

By eliminating the adjustable riser you will get rid of 90% of the side to side play in your steering. You can lose up to 1lb of weight saving also, depending on the height of riser you choose.

Photo- Bryn Hughes

28

Snow Acessories

Blades

Ad a little more metal to the rear tunnel of your snowmobile. The CFR XP/XM Blades are designed to be fastened to the outside or the inside rear tunnel of your 146",154" ,163" or 174" Track length Ski Doo snowmobile.

They will ad 50% more strength to the rear tunnel. The XP/XM Blades are recommended if you travel on bumpy roads carrying lots of extra weight on the rear tunnel of your snowmobile. Blades also available for Arctic Cat M series 2005-2008 and Yamaha Nytro.

Features: -Anatomically designed to fit the rear tunnel -XP/XM Blades all come in anodized black -Come complete with 1 right/1 left side and stainless steel rivets -Made in Canada

Super Strap

Part no. TS

-Anodized Black Skidoo XP, XM

-146 Part no. TS01 -154 Part no. TS02 -163 Part no. TS03 -174 Part no. TS07

Yamaha Nytro Part no. TS04

Arctic Cat M-Series Part no. TS06

Part no. 1013

The must have strap for your backcountry adventures, the CFR Super Strap and duct tape can pretty much fix anything.

Tunnel Armor

Part no. 1014

The CFR Tunnel armour use super sticky 3M adhesive to add a layer of protection to your snowmobile. Stick the pad on the tunnel to prevent against rubbing from equipment.

Snow Scraper

Part no. 1012

The CFR Snow Scraper is a great way to scrape off unwanted snow and ice from your running boards, sn owboards or skis.

29

Sled Wraps Sled wraps not only ad style to your whip but also protect the plastic from the abusive sport of snowmobiling. The graphics are a real hand drawn topo graphical map of one of our favorite snowmobiling areas just west of our headquarters here in Pemberton, BC Canada. CFR is working with Toyskinz to produce these wraps witch are made of industry leading 6 mil. vinyl and 15 mil.over-laminate, making a total of 21MIL thickness. The Colors and designs of the wraps work well with all of our other snowmobile accessories for a tight look!

30

Part#WSD01 White

Part#WSD02 Pink

Part#WSD03 Red

Part#WSD04 Black

Part# WP01 Red

Part# WP02 White

Part# WP03 Pink

Part# WP04 Black

Part# AC01 Green

Part# AC02 White

Part# AC03 Pink

Part# AC04 Black

Part# WY01 Green

Part# WY02 Blue

Part# WY03 Red

Part# WY04 Black

Ski-doo

Polaris

Arctic Cat

Yamaha

Scratchers

Scratchers

Part no. S01

Reversable Scratchers

Part no. S02

The CFR Snow Scratchers are a cost effective way to prevent the overheating of your snowmobiles motor on those early morning long approaches.

These Scratchers are bad ass. They kick up twice as much snow as regular Scratchers and won’t break or bend if you accidentally go in reverse. Hanger included to secure scratchers when not in use.

INSERT RAD PHOTO

31

Spare Parts

Ladder Strap Part no. 1003

Part no. 1003

The CFR 220MM Replacement Ladder Strap works on all of our Snowboard and Ski Brackets.

-64 stainless steel rivet and two washers included

Replacement Strap Replacement strap 16" Part no. 1002

Part no. 1002

The CFR 16� replacement strap is used in all of the snowboard and ski rack carrying racks that we manufacture. A 64 stainless steel rivet and washer included.

Replacement strap 8" Part no. 1001

The CFR 8� replacement strap is used in most of the snowboard and ski rack carrying racks that we manufacture. A 66 stainless steel rivet and two washers included.

Part no. 1001 32

Spare Parts

Aluminium Ratchet

The CFR Aluminum Ratchet is custom made to take the abuse that snowmobiling throws at it. These custom made ratchets are designed to hold your snowboard or skis down solid until you need them no matter what! Powder coated black finish will keep them rust free and looking good. Thick springs are long and will give you years of trouble free use.

-This Ratchet will replace all CFR ratchets current and past years

Part no. 1006

Photo- Bryn Hughes

33

Stickers

Stickers 12-Pack

Part no. ST01

Large Stickers

Part no. ST02

34

CFR Apparel

CFR Skull Logo

CFR Hats CFR Skull Logo black........................................SG14 Mountain Saw black and white......................SG15 Mountain Saw red and white......................SG15.1 Goat Skull black and white............................ SG16 Goat Skull red and white..............................SG16.1

Mountain Saw

Goat Skull

Photo- db Sledder- Dave Treadway

35

CFR Apparel

CFR T-Shirts BC black...............................Small - SG01 BC black...............................Medium- SG01.1 BC black............................... Large -SG01.2 BC black............................... X-Large-SG01.3

BC

CFR Side Logo black.........Small -SG02 CFR Side Logo black.........Medium-SG02.1 CFR Side Logo black.........Large -SG02.2 CFR Side Logo black.........X-Large-SG02.3 Mountain Saw red............Small -SG03 Mountain Saw red............Medium -SG03.1 Mountain Saw red.............Large -SG03.2 Mountain Saw red.............X-Large-SG03.3

CFR Side Logo

CFR Skull Logo..................Small - SG04 CFR Skull Logo..................Medium -SG04.1 CFR Skull Logo.................. Large - SG04.2 CFR Skull Logo.................. X-Large- SG04.3

Mountain Saw

Goat Skull 36

Goat Skull.............................Small -SG05 Goat Skull.............................Medium-SG05.1 Goat Skull.............................Large -SG05.2 Goat Skull.............................X-Large-SG05.3 SRW........................................Small -SG06 SRW........................................Medium-SG06.1 SRW........................................Large -SG06.2 SRW........................................X-Large-SG06.3

Model- Tim Grey Photo- Julie Ann Chapman

CFR Skull Logo

SRW

CFR Apparel

CFR Long Sleeve T-Shirts Mountain Saw red........................Small - SG07 Mountain Saw red........................Medium- SG07.1 Mountain Saw red.........................Large -SG07.2 Mountain Saw red.........................X-Large -SG07.3

Saw Logo

BC black..........................................Small - SG08 BC black..........................................Medium - SG08.1 BC black.......................................... Large -SG08.2 BC black.......................................... X-Large -SG08.3 CFR Skull Logo black...................Small -SG09 CFR Skull Logo black...................Medium-SG09.1 CFR Skull Logo black.................. Large -SG09.2 CFR Skull Logo black...................X-Large-SG09.3

BC

Goat Skull........................................Small -SG10 Goat Skull........................................Medium-SG10.1 Goat Skull........................................Large -SG10.2 Goat Skull........................................X-Large-SG10.3

CFR Skull Logo

Photo- db

Goat Skull 37

CFR Apparel

CFR Hoodies Text Logo.......................Small -SG11 Text Logo.......................Medium-SG11.1 Text Logo.......................Large -SG11.2 Text Logo.......................X-Large-SG11.3

Text Logo

Mountain Saw..............Small -SG12 Mountain Saw..............Medium-SG12.1 Mountain Saw............. Large -SG12.2 Mountain Saw..............X-Large-SG12.3 Goat Skull.....................Small -SG13 Goat Skull.....................Medium-SG13.1 Goat Skull.....................Large -SG13.2 Goat Skull.....................X-Large-SG13.3

Saw Logo

Goat Skull Logo 38

Ramps

Ramps

-6 ft Ramp Part no. AR01 -7 ft Ramp Part no. AR02 -8 ft Ramp Part no. AR03

8 Foot Ramp!

39

Cheetah Factory Racing started designing and building snowmobile products in 1999. 16 Years later our product line has grown along with our passion for snowmobiling. Snowmobiles are taking us further and deeper into the backcountry than we ever thought would be possible. As new technology is improving snowmobile performance and ability, we are constantly designing and creating new products to make your experience even better.

The products featured in this catalogue compliment and improve the next generation of snowmobile technology. All our products have been tested and used on the most abusive, bumpiest trails and backcountry conditions known. Only after being tested, refined, approved by us and our valuable team of athletes are products put in the line up. Our products are designed to maximize the enjoyment of your days out snowmobiling and to never let you down or miss a powder day!

Cheetah Factory Racing PO Box 93 Pemberton, BC V0N2L1 604-894-1880 dave@cheetahfactoryracing.com

Studio Photos: Dice K. Brian Hockenstein Catalog Design by

Photo: Chad Chomlack

cheetahfactoryracing.com