Printer Not Connecting To Wi-Fi – Troubleshoot

If your printer not showing up on network, the trouble might be with your printer or your network. Let’s explore both the causes.

Turn It O And Then On!

This technique is a very common one that’s used in troubleshooting lots of device issues. So, just power o the printer and then turn it on again. Then, try connecting the printer to your network.

Does it work? If yes, that’s terrific! If it doesn’t, use the technique provided below.

Is The Hardware Setup Completed?

Have you completely finished your printer’s hardware setup? Checking this will help solve the issue where your printer is not getting connected to your network.

This might seem trivial, but it’s a significant factor that’s often overlooked. So make sure that the printer’s hardware installation part is done perfectly. Even if a single packing material is left unremoved, it may lead to issues, including network connection troubles. Therefore, check this aspect.

Check Your Router

● Inspect the router you’re using for damages.

● Is it working fine? If yes, that’s swell! In case the router is damaged, go ahead and replace it with a new one.

● If you don’t wish to use a router, opt for the Wi-Fi Direct connection method. In this case, you can connect the printer to your wireless network without using a router. That’s fantastic, isn’t it?

This is one of the most common troubleshooting techniques using which you can resolve most of the connection issues. Connect printer to router

● Observe the distance between your printer and router.

● Are they close enough? Yes? It means the distance between the two devices is not the factor causing the problem where your printer is not connected to your network.

● However, if the two devices are in dierent rooms at your home, keep them in the same room.

● Ensure that the printer and the router are placed close to each other so that the wireless signal strength is good enough.

Use The Respective Tool For Your Printer Brand

Every printer manufacturer provides a tool for their printers to sort out connection issues. Utilize that tool to rectify your network connection problems. A few examples are given here.

● If you’re using a Brother printer, use the Brother Network Connection Repair tool to connect your printer to your network.

● In case you’re using an HP printer, you can opt for the simple tool called HP Print and Scan Doctor to solve connection issues.