2025CATALOGUE
Automotive | Industrial | Hardware
Air Accessories
DIGITAL TYRE INFLATOR
• Measurement Unit: PSI, BAR, KPA, KG/CM2
• Displays in 1 PSI increments
• 38mm large LCD display with blue back-light
• Maximum pressure:
150 PSI, 10 BAR, 1000KPA, 10 KG/CM2
TYRE REPAIR KIT
• Spiral hole reaming tool
• Repair plug inserting tool
• 20 repair plugs
• Replacement insertion tool tip
• Lubricant
• Trimming knife
TYRE DEFLATOR
• Quick and accurate
• Gauge up to 70psi
ALUMINIUM TYRE INFLATOR
• Range: 0-140 PSI
• Heavy duty aluminium die cast body
• Spiral protected air hose
• Dual hold-on chuck
• Rubber hose protector
• Impact absorbing bumper
• Magnified sight glass
TYRE VALVE CARE PACK
• 1 x Valve tool
• Re-taps threads inside & outside
• Reams inside valve stems
• 4 x Valve cores
• 4 x Plastic valve caps
• Caps fit standard tyre valve stems
MEGA GRUNT DOUBLE AIR COMPRESSOR
TYRE AIR INFLATOR
• 0-150 PSI, 0-1050 KPA
• Heavy duty aluminium die cast body
• Spiral protected air hose
• Dual hold-on chuck
• Rubber hose protector
• Impact absorbing bumpers
• Magnified sight glass
DIGITAL TYRE GAUGE
• 0-99 psi
• Luminated tip
• Digital LED display
• Long-lasting battery
• Measured in PSI, kPa & bar
• Automatic shut off
MEGA GRUNT HEAVY DUTY AIR COMPRESSOR
Part No. GC500
Portable Lighting
125MM LED HAND-HELD
• LED 12V, 10 WATT
• 810 Lumens
• 125mm hand-held spotlight
• Rechargeable lithium battery
• 240V Charger
• Runtime: 2.5hrs Approx
140MM LED HAND-HELD
• LED 12V, 15 WATT
• 1200 Lumens
• 140mm Hand-held Spotlight
• Charge time: 4hrs Approx Part
• Rechargeable Lithium Battery
• 240V Charger
• Runtime: 3hrs Approx
• Long range
65W SPOTLIGHT
• LED 12V, 240V, 65 WATT
• IP65 Waterproof
• 120mm Hand-held Spotlight
• Battery: 12V 2600MAH
• Lumens: 6000 Lumens
• Long Range 1500m Approx
• Charge time: 4-5hrs Approx
• Rechargeable Lithium Battery
LED HEAD LAMP & COB 260LM
Part No. HHL-2R
• Bright LED COB light for illuminating a wide area
• Red LED COB light to help preserve night vision and reduces eye strain
• USB-C rechargeable, 1200mAh Battery
• Hands free switch: Using the inbuilt motion sensor you can turn the head torch off and on.
• Up to 7 hours of runtime
• Long Range
120LI-65W SPARE BATTERY
• Spare Battery for 120LI-65W
• Ion-lithium
• Rechargeable
• 12V 2600MAH
LED HEAD LAMP 250LM
• Cree XPG LED + 2pce COB LED
• Water Resistant IPX4
• 250 Lumens Maximum Output
• Long Beam Distance
• 1M Impact Resistant
• x3 AAA (Not Included)
Part No. HHL-1B
Part No. 120LI-BATT
ALUMINIUM TORCH
Part No. HWL-AMFTB
• High Powered Cree XPG LED
• 300 Lumen Spot Light
• 250 Lumen COB Work Light
• Multi-Function
• Aluminium Body
• Magnetic Base
• Requires 4 x AAA Batteries (Not Included)
Portable Lighting
MA G NETIC B ASE
180° FLEX WORK LIGHT – 3W COB LED
• 300lm Dimmable Main Light
• 70lm Inspection Light
• 180° Multi Position
• 2200mAh 3.7V Rechargeable Li-ion Battery
• USB-C Charging Port
• Magnet Base
RECHARGEABLE DIY WORK LIGHT
Part No. HWL-COBCL
• 3 WATT COB LED
• 250LM Output
• End inspection light
• Foldable handle
• Strong magnetic back & base
• Convenient hanging hook
• 240 Volt charging dock
• Rechargeable Lithium battery
270° FLEX WORK LIGHT – 5W COB LED
• 360lm Dimmable Main Light
• 150lm Inspection Light
• 270° Multi Position
• Approx 4 Hours Charging Time
• Approx Working Time: 4.5 Hours (Inspection Light) 3 Hours on Main Light
• USB-C Charging Port
• Magnet Base
FLEX-SHAFT WORK LIGHT
Part No. HWL-FLEXB
• XPG High Performance LED
• 200 lumens (high) 80 lumens (low)
• Adjustable focus, magnetic base
• Water resistant (grade: IP54)
• 450mm flexible shaft
• 3 Batteries included
Auto Lighting
• 175mm LED driving light
• 40W + 6W daytime running light
• 12 Volt - 48 Volt - 2350LM
• Dust & waterproof: IP67
• Driving light 40W: 5300-6000K
• Daytime running light 6W: 6000-6500K
• Dual purpose spot and driving capability
• Black and Chrome finish
• 200mm Diameter
• Lightweight
• IPX7
• Multi Volt
• 7500K
• Size: 115mm x 115mm
• 9 ultra bright, high power LED
• Rating: 1450lm
• 27W
• 10-30V
• 2 x 180mm long range lights
• 2 x clear, scratch resistant lens covers
• Full wiring harness included
• Waterproof wire connectors
• Adjustable focus beam
• 12V, 100W, Osram Xenophot globes
• Stainless steel fasteners
• Triple ‘O’ ring seal
• Non-corrosive body
• Metal reflector
No.
SEALED BEAMS
Flood-lamp 114mm 24V 80W
Part No. 13016X
Part No. 4411X
Hi/low beam 24v 65/50w
TRAILER LIGHT 12V LED
No. NSTL12
• Size: 150 x 78mm
• 12V with reflector
• Submersible
• Complies with ADR
• Pre-wired with 35cm, 4 core wire
• Modern slim design
Auto Lighting
TRAILER LIGHT 12V LED - NP
Part No. NSTLNP12
• Size: 150 x 78mm
• 12V with reflector
• Submersible
• Complies with ADR
• Pre-wired with 35cm, 4 core wire
• Modern slim design
• Built-in number plate and light
Flood-lamp 114mm 12V 35W Part No. 6002X
Part No. 6001X
Part No. 14002X Flood-lamp 24v 80w Part No. 4651X High beam 12v 50w Part No. 9173
Halogen Sealed Beam 7"12V65/55
Part No. FH6014
SEMI SEALED BEAMS - GLOBE NOT INCLUDED
Headlamp insert high/low - H4 - 178mm
Part No. 810030
Flood-lamp 12v 80w
Part No. 14018X
Part No. 5731X 12V 60/37.5W with parker
Hi/low beam 24v 75/55w
Part No. 6024X
Halogen S/B 165x100mm 12V50/65
Part No. H14603
Headlamp insert high/low - H4 - 165x100mm
Part No. 812010
Headlamp insert high - H1 - 165x100mm Part No. 4401X
Part No. 812020
beam 24v 55w
beam 24v 55w Part No. 6000X
Part No. 9079
Halogen S/B 200 x 142mm 12V 70/60
Part No. H15802
Headlamp insert high/low - H4 -200x142mm
Part No. 812040
Heat Shrink Tube & Fuses
STANDARD 112 PIECES STANDARD 220 PIECES
• 12 Sizes 3.5mm to 20mm
• Colours: Black & Red
• Flame Resistant Polyolefin
• 112 Pieces
1M HEAT SHRINK TUBING
• 12 Sizes: 5mm to 20mm
• Colours: Black, Red, Blue, White, Green & Yellow
• Flame Resistant Polyolefin
• 220 Pieces
Heat shrink tubing is used in automotive and industrial settings to insulate, protect, and organize electrical connections against moisture, abrasion, and environmental hazards. Single wall tubing offers basic, cost-effective protection for standard applications, whereas dual wall tubing provides enhanced durability and resistance for more demanding and harsh conditions.
DRS-4 4mm
DRS-6 6mm
DRS-8 8mm
DRS-10 10mm
DRS-12 12mm
• 12 Sizes 3.5mm to 25.4mm
• Colours: Black & Red
• Flame Resistant Polyolefin
• 88 Pieces
AF BLADE FUSE ASSORTMENT KIT
This
DRS-14 14mm
DRS-16 16mm
DRS-20 20mm
DWBS-3 3mm
DWBS-4 4mm
DWBS-6 6mm
DWBS-8 8mm
DWBS-10 10mm
DWBS-12 12mm
DWBS-16 16mm
DWBS-20 20mm
DWBS-25 25mm
DWRS-3 3mm
DWRS-4 4mm
MINI BLADE FUSES
DWRS-6 6mm
DWRS-8 8mm
DWRS-10 10mm
DWRS-12 12mm
DWRS-16 16mm
DWRS-20 20mm
DWRS-25 25mm
MINI BLADE FUSE ASSORTMENT KIT
This assortment contains a range of mini blade fuses, 100 pieces in total in a durable plastic carry case. 10 of each type.
Fuses & Trim Clips
3AG GLASS FUSE HOLDER
Part No. FH-1
• Heavy duty
• Pre-wired
• Blister pack
BLADE FUSE HOLDER
• Water resistant
• Pre-wired
• Blister pack
BLADE FUSE HOLDER
Part No. FH-4
• Fully insulated
• Pre-wired
• Blister pack
BLADE FUSE HOLDER
• Water resistant
• Pre-wired
• Blister pack
MINI BLADE FUSE HOLDER
Part No. FH-6
• Water resistant
• Pre-wired
• Blister pack
3AG GLASS FUSE HOLDER
Part No. FH-10
• Water resistant
• Pre-wired
• Blister pack
• Prevent trim clip damage
• Faster removal
• Comfortable, non-slip grip
• Set includes: Door Trim & Clip Remover, Clip Removal Plier & Trim Clip Pliers
TRIM CLIP ASSORTMENT - 800PCE
Part No. GTI-800
• An assortment of the most popular trim clips, these pieces are suited for a variety of models including: GMH, Ford, Japanese and Korean vehicles.
• 800 Pieces
• 26 Different types of fasteners
• Comes with 30 of each type, apart from GTI800-10 which is 50
• Replacement packs are 30 of each type, apart from GTI800-10 which is 50
• Durable, quick and easy to access carry case.
• A range of body clips, push nuts, trim screws, retainers and plastic anchors
REPLACEMENT PACKS AVAILABLE
• A total of 11 pieces in a carry bag with, easy to carry and store.
• Impact resistant plastic set safely removes and installs interior and exterior trim, door panels, dash and upholstery panels, body moldings and emblems.
• Set includes: Flat Clip Panel, Straight Panel, Panel, Clip Panel, Sharp Panel, Angled Clip Panel, Narrow Type, Upholstery Clip, Handy, Pull Type and Wide Type Removers.
Part No. HTRTS-3
Part No. HTRTS-11
3 PEICE TRIM CLIP REMOVER TOOL SET
11 PEICE TRIM REMOVAL TOOL SET
Terminal Kits
Contains 100 popular crimp
PROFESSIONAL TERMINAL ASSORTMENT KIT
• For the auto-electrician and frequent user of terminals
• This full-range kit contains a comprehensive assortment of 400 terminals and connectors suitable for 2.5mm to 5mm wire
• Supplied in a practical box with fixed dividers, plus full colour contents chart to assist in terminal selection and identification for re-ordering purposes.
• This comprehensive 700 piece assortment is ideal for the professional user.
• Contains the most popular terminals and includes a full colour contents chart to assist in terminal selection and identification for re-ordering purposes.
• Supplied with a heavy-duty adjustable ratchet crimping tool in a sturdy metal carry case.
This selection of crimp terminals is made of the most popular, fast moving terminals, to cover a wide demographic of customers. This wall merchandiser is suitable for automotive, hardware and industrial applications.
• Male/Female Spade Terminals
• Male/Female Blade Terminals
• Male/Female Bullet Joiners
• Male/Female 2-Way Piggy Back
• Male/Female Eye
Includes:
5 x 49 types of Terminal Packs
Total of 245 Packs
Merchandiser Dimensions: 1150mm x 385mm (including header)
Crimp Terminal Merchandiser
MERCHANDISER CONTENTS (49 TYPES)
Part No.
KSB-6 Blue Wire Tap Connectors
KSR-6 Red Wire Tap Connectors
R13-4 Red Ring Terminals 4mm
R13-5 Red Ring Terminals 5mm
R13-6 Red Ring Terminals 6mm
R1320FB Lanced Push-On Female
R1320MB Lanced Push-On Male
R13Y-4 Red Spade Terminals 4mm
R200F Red Bullet Terminals Female
R200M Red Bullet Terminals Male
R201F Blue Bullet Terminals Female
R201M Blue Bullet Terminals Male
R202F Yellow Bullet Terminals Female
R202M Yellow Bullet Terminals Male
R22-5 Blue Ring Terminals 3/16”
R22Y-4 Blue Spade Terminals
R23-10 Blue Ring Terminals 10mm
R23-6 Blue Ring Terminals 15/64”
R23-8 Blue Ring Terminals 5/16”
R309F Red Blade Terminals Female
R309M Red Blade Terminals Male
R309WF Red Fully Insulated Blade Terminal
R309WM Red Blade Terminals Male
R320F Blue Blade Terminals Female
R320M Blue Blade Terminals Male
R320WF Blue Fully Insulated Blade Terminals
R320WM Blue Fully Insulated Blade Terminals
R355F Yellow Blade Terminals Female
R355M Yellow Blade Terminals Male
R355WF Yellow Fully Insulated Blade Terminal
R383FM Red 2-Way Blade Terminals Male/Female
R384FM Blue 2-Way Blade Terminals Male/Female
R385F Blue Blade Terminals Female
R386F Yellow Blade Terminals 10mm
R509F Red Speaker Blade Terminals
R509M Red Speaker Blade Terminals
R52-4 Yellow Ring Terminals 4mm
R52-5 Yellow Ring Terminals 5mm
R520F Red Spade Terminals Female
R520M Red Blade Terminals Male 4.8mm
R520WF Red Blade Terminals Female 5mm
R52Y-5 Yellow Spade Terminals
R53-6 Yellow Ring Terminals 6mm
R53-8 Yellow Ring Terminals 8mm
R55-10 Yellow Ring Terminals 10mm
R55-13 Yellow Ring Terminals 13mm
RTG-1 Red Cable Connectors
RTG-2 Blue Cable Connectors
RTG-3 Yellow Cable Connectors
WIRE TAP CONNECTOR
WIRE TAP CONNECTOR
WIRE TAP CONNECTOR
RED RING TERMINAL
13-5 2-3mm 1/4” RED RING TERMINAL
3/16” BLUE RING TERMINAL
5/16” BLUE RING TERMINAL
5/16” YELLOW RING TERMINAL
3/8” YELLOW RING TERMINAL
YELLOW RING TERMINAL
FEMALE BULLET TERMINAL
BULLET TERMINAL - MALE
53-8 5-6mm
53-10 5-6mm
Electrical Switches and Cable Management
BLUE TOGGLE SWITCH
Part No. HS15B
• 12V, 20 Amp., 3 Pin
• On/Off Switch, Blue LED
• Mounting: 12mm
PUSH/PULL SWITCH
Part No. HS05
• 12V, 16 Amp., 2 Pin
• Short Push & Pull Switch
• Mounting: 8mm
SHORT SWITCH TOGGLE
Part No. HS101
• 12V, 20 Amp., 2 Pin
• On/Off Switch
• Mounting: 12mm
Part No. HS15R RED TOGGLE SWITCH
• 12V, 20 Amp., 3 Pin
• On/Off Switch, Red LED
• Mounting: 12mm
ROCKER SWITCH
Part No. HS16
• 12V, 15 Amp., 2 Pin
• Plain Rocker Switch
• Mounting: 17mm x 37mm
BLUE ROCKER SWITCH
Part No. HS22B
• 12V, 20 Amp., 3 Pin
• On/Off Switch, Blue Illuminated
• Mounting: 12mm
CABLE CLAMPS 25 PIECES
SHORT TOGGLE SWITCH
Part No. HS14
• 12V, 20 Amp., 2 Pin
• On/Off Switch
• Mounting: 12mm
BLUE SWITCH TOGGLE
Part No. HS17B
• 12V, 20 Amp., 3 Pin
• On/Off Switch, Blue LED
• Mounting: 12mm
RED ROCKER SWITCH
Part No. HS22R
• 12V, 20 Amp., 3 Pin
• On/Off Switch, Red Illuminated
• Mounting: 12mm
TOGGLE SWITCH
Part No. HS137
• 12V, 25 Amp., 2 Pin
• On/Off Toggle Switch
• Mounting: 12mm
Part No. HS17R
• 12V, 20 Amp., 3 Pin
• On/Off Switch, Red LED
• Mounting, 12mm
BLUE ROCKER SWITCH
Part No. HS20B
• 12V, 20 Amp., 3 Pin
• On/Off Switch, Blue LED
• Mounting, 12mm
SPLIT CONDUIT
4x4 & Battery Accessories
CABLE TIES
CCT3100B 3 x 100mm
CCT5200B 5 x 200mm
CCT5250B 5 x 250mm
CCT5300B 5 x 300mm
CCT8380B 8 x 380mm
BULL BAR MOUNTING BRACKET
ANCHOR TRACKS (PAIR)
• Suits battery width 7" (175mm)
• Length of legs: 220mm
ALUMINIUM BRACKET - BLACK (PAIR)
METRIC ANTI-THEFT NUTS
• Adjustable metal hold down
• Suits batteries 5-1/2" (140mm) to 8-1/2" (215mm)
• Length of legs: 215mm
• 2 x anti-theft nuts
• 1 x coded key
• Thread Size: M10 x 1.5mm
• 2 x anti-theft nuts
• 1 x coded key
• Thread Size: 1/2” BSW
• Complete with nuts and washers
Electrical & Battery Accessories
SMART BATTERY CHARGER 6/12 VOLTS 2 AMP.
COMPACT
DIGITAL MULTIMETER
• Compact design
• Overload protection on all ranges
• Sampling 2-3 times readings per second
• Diode assembly test / Transistor hFE test
• Low battery voltage indication
SMART BATTERY CHARGER 6/12 VOLTS 6.5 AMP.
9V BATTERY DIGITAL MULTIMETER
• Audible Continuity
• Transistor Test
• Diode Test
• Includes Test Leads
• HCT-LED is suitable for use with 6V, 12V & 24V systems
• HCT-LCD-48 suitable for use with 12 to 48V systems
• Provides accurate voltage value of the circuit
• LED indication lights illuminate Green (-) and Red (+)
• Stainless steel testing probe
• +/- 0.3 volt allowance
SMART BATTERY CHARGER 12/24 VOLTS 12 AMP.
PROFESSIONAL DIGITAL MULTIMETER
• CE/GS/cTUVus certified professional multimeter
• Complies with CAT III 600V
• IP65 rated
• Accurate and precise measurement
• “Function Memory” feature
6-12V CIRCUIT TESTER
BATTERY HYDROMETER
Part No. HCT-LCD48 (12V to 48V)
Part No. HCT-5013
Part No. CBH34
400 AMP BOOSTER CLAMPS (PAIR)
12V 10 AMP TEST CLAMPS
MOUNTING BRACKET
200
Electrical & Battery Accessories
480
12V 25 AMP TEST CLAMPS
QUICK CONNECTORS
50 AMP TEST CLAMPS
QUICK CONNECTOR COVERS
• Designed to securely and conveniently mount quick connectors
• Suits TA-0201 Plug
• Single bracket only. Plug not supplied.
Fastener Removal
DRIVER BITS
#2 PHILLIPS
#2 POZI
PIECE METRIC & IMPERIAL HEX KEY SET
No. HKS-30
ADJUSTABLE TAP SOCKET 3/8” DRIVE 2 PIECE SET
Part No. HTS38
• Adjustable
• Fits all 3/8” square drive ratchets
• Knurled ring twists to adjust jaws to tightly secure taps up to 1/2”
• Imperial 15 Sizes: 0.028” to 3/8” (Long Arm Series)
• Metric 15 Sizes: 0.7mm - 10mm (Short Arm Series)
• Chrome Vanadium Steel
• Industrial Quality
#2 SQUARE DRIVE
KEY SETS
Part No. Description Shape
CFK-I Imperial - 9 Sizes
CFK-IB Imperial - 9 Sizes
CFK-M Metric - 8 Sizes
CFK-MB Metric - 8 Sizes
CFK-TPX TPX Torx- 8 Sizes
SCREW EXTRACTOR 5 PIECE SET
Part No. CSES-1
• 5 Piece Screw Extractor Set
• Extracts Screws 6mm - 14mm
• Removes Most Head Types
64 PIECE DRAIN (SUMP) PLUG REPAIR KIT
Part No. HDPRK-64
• 2 Types of Plugs: Socket & Hex Head
• 4 Sizes: M13, M15, M17, M20
• 4 Taps to Suit
• 5 of Each Size Drain Plugs
• 10 Washers to Suit Each Size
METRIC & IMPERIAL 13 PIECE HEX SET
Part No. HHES-1
• For removing rusted, rounded or stripped fasteners.
• Made of high hardness chrome molybdenum steel.
• Sizes: 1/4", 5/16"(8mm), 3/8", 7/16"(11mm), 1/2", 13mm, 9/16"(14mm), 15mm"5/8"(16mm), 11/16", 3/4"(19mm)
DRAIN (SUMP) PLUG REMOVER TOOL SET
PLASTIC SUMP PLUGS AVAILABLE FROM CHAMPION
• Remove and install plastic drain plugs with ease!
• Suits most vehicles with plastic plugs.
• 3/8" T-Handle
• 8 Adapters for Ford, PSA, Daf, Man, GM, Mercedes, BMW, Volkswagen & Audi Group Part No.
METRIC
Part No. CTD32
• Metric Taps in 7 Sizes: M3, M4, M5, M6, M8, M10, M12
• (Starter, Intermediate, Finishing Taps)
• Metric Dies in 7 Sizes: M3, M4, M5, M6, M8, M10, M12
• Thread Gauge
• Tap Handle
• Screwdriver
Drilling, Tapping & Sump Plug Tools
METRIC & IMPERIAL
PIECE
Part No.
• 1 x Tap Handle 1/8" to 1/2" (3mm to 12mm)
• 1 x Tap Handle 1/4" to 3/4" (6mm to 20mm)
• 1 x ‘T’ Tap Handle
• 1 x Die Stock (1" OD) Handle
• 1 x Die Stock (1-1/2" OD) Handle
• 70 Intermediate & Finishing Taps
• 35 Dies: 23 x 1" & 13 x 1-1/2"
14 PIECE METRIC TAP SET
Part No. HTTS14
• Tap: M3 x 0.50 to M10 x 1.50
METRIC & IMPERIAL
PIECE
• Fine & Course Threads
• 48 x Taps & 48 x Dies: M2 to M18 & 1/4" to 3/4"
• 5 x HSS Drills
• 5 x Screw Extractors
• 2 x Pitch Gauges
• 3 x Tap Handles & 2 x Die Handles
• 1 x Screwdriver
• 1 x Centre Punch
13 PIECES IMPERIAL TAP & DRILL SET
Part No.
• Tap: 4-40 UNC to 1/4-20 UNC
• Drill: No.7 to No.43
Part No. CTD115
CTD110
HTTS13
TERMINAL
MULTI-FUNCTION ELECTRICAL PLIERS
(CABLE TIE) PLASTIC CUTTERS CIRCLIP PLIER REPLACEMENT TIPS
RIVET GUN & REPLACEMENT STEMS
Part
H2033-2
H2033-3
H2033-4
H2033-5
H2033-6
H2033-8
H2033-10
Nut Rivet Gun
M3 Replacment Stem
M4 Replacment Stem
M5 Replacment Stem
M6 Replacment Stem
M8 Replacment Stem
M10 Replacment Stem
RIVETER ADAPTOR - POP RIVETS
• Suitable for 2.4mm, 3.2mm, 4.0mm & 4.8mm diameter rivets
• Suitable for aluminium rivet applications
• Ideal for roofing, guttering, plumbing, handyman, vehicle repairs, securityinstallations, caravan & marine applications
BLIND RIVET HAND GUN
Part No. CBRG-1
• Stroke adjustment features
• Excellent leverage
• Industry fabrication quality
• Easy one hand operation
• Tool overall length 200mm
• Working stroke 7mm
RIVETER ADAPTOR - NUT RIVETS
• Suitable for M3, M4, M5, M6 & M8 Nut Rivet Inserts
• Suitable for aluminium & steel Nut Rivet Insert applications
• Ideal for vehicle restoration, vehicle storage/rack installation, aeronautical & marine applications
BLIND RIVET LONG ARM GUN ALUMINIUM & STEEL RIVET NUTS
• Quick change nozzles under the stem catcher
• Plastic stem catcher for rivet wastes
• 5 Nozzle Sizes: 2.4mm to 6.4mm
• Handle Length: 380mm
Part No. CBRG-2
Part No. CRA-NR
Part No. CRA-PR
Lubrication Accessories
• Includes 6” steel extension & high-pressure hose coupler
• Uses standard 450gm cartridges or can also be hand packed
• Knurled barrel for non-slip grip
• Rated to 10,000 PSI
• Air bleeder valve
MINI PISTOL GRIP GREASE GUN
• Flexible grease hose and coupler
• 2 fixed nozzles
• Cartridge: 85g
• Bulk load: 120cc
GREASE GUN FLEXIBLE HOSES
GREASE CARTRIDGES - TWIN PACK
• Spring loaded activation trigger
• Sliding sleeve reveals 4 hardened spring steel jaws that lock onto grease nipples and leaves both hands free to operate grease gun
• 1/8" NPT female thread.
• Connects directly to any grease gun connector
• Lubricates into very tight places (ie: universal joints, sealed bearings)
• 40mm long stainless steel needle
• General purpose grease
• Recommended operating temperature: 200C to 1200C
• Good mechanical stability
• Good oxidation stability
• Excellent resistance to rust & corrosion
• Cartridge gives easy clean loading
• 1/8" BSP Thread
• Strong positive grip on all grease nipples
Hose Accessories
HOSE CLAMPS
STAINLESS STEEL HOSE CLAMPS
HOSE MINI CLIPS
HOSE MINI CLIPS
7PC
FLEXIBLE DRIVER SET
Part No. HCD3
• 1/4” Drive Standard Sockets
• Sizes: 5, 6, 7, 8, 9 & 10mm
• Handy Rubber Grip Cover
Thread & Tapping Tools
Part No. CTT48 (Kit)
Part No. CTT48-P (Panel Only)
3MM TO 10MM RATCHET “T” HANDLE
METRIC 20 LEAF SCREW PITCH GAUGE Part No. HSPG30
UNC/UNF 30 LEAF SCREW PITCH GAUGE
• Twin HSS blade adjusts automatically
• M4-M45 (Capacity:5/32” to 1-3/4”(4-45mm)
• Knurled Grip Adjustment
• Zinc body, CR-plated
THREAD TESTER - 48 SIZES Part
• Twin HSS blade adjusts automatically
• M4-M45 (Capacity:5/32” to 1-3/4”(4-45mm)
• Knurled Grip Adjustment
• Zinc body, CR-plated
• Twin HSS blade adjusts automatically
• M4-M45 (Capacity:5/32” to 1-3/4”(4-45mm)
• Knurled Grip Adjustment
• Zinc body, CR-plated
5MM TO 12MM RATCHET “T” HANDLE
Part No. CRTH-2
METRIC/BSW 52 LEAF SCREW PITCH GAUGE
Part No. HSPG52
• Twin HSS blade adjusts automatically
• M4-M45 (Capacity:5/32” to 1-3/4”(4-45mm)
• Knurled Grip Adjustment
• Zinc body, CR-plated
RESTORER FILE
• Designed to accurately measure both UNC (Unified Coarse) and UNF (Unified Fine) thread sizes.
• It’s suitable for measuring the length and diameter of UNC, UNF, Metric, and SAE.
• Enables fast and easy determination of the exact length, width, and diameter of nuts and bolts.
• Constructed from ABS plastic for accurate measuring. It also includes SAE to ISO hardness conversion.
13 PIECE DRILLS COBALT / HEX
• 1/4 HEX Shank
• 13 Peice
• 1.5mm to 6.5mm
3 PIECE SET COBALT STEEL STEP DRILL
Part No. HSD-3C
• Twin HSS blade adjusts automatically
19 PIECE SET COBALT DRILLS
• 0.5mm Increments
• 19 Peice
• 1.0mm to 10mm
5 PIECE SET CARBIDE BURR
Part No. HCBS-5
Drilling & Tapping Tools
6 PIECE KIT DRILLS & TAPS
• High Speed Steel: HSS6542
• HEX Shank
• Size: M3 x 0.5mm to M10 x 1.5mm
• Twin HSS blade adjusts automatically
• M4-M45 (Capacity:5/32” to 1-3/4”(4-45mm)
• Knurled Grip Adjustment
• Zinc body, CR-plated
COBALT DRILL BITS
• M4-M45 (Capacity:5/32” to 1-3/4”(4-45mm)
• Knurled Grip Adjustment
• Zinc body, CR-plated
10 PIECE SET SCREW EXTRACTORS
• 5x Reverse Drill Bits: 5/64”, 7/64”, 5/32”, 1/4”, 19/64”
• 5x Screw Extractors: EX-1 to EX-5
6 PIECE SET COUNTERSUNK BITS
Part No. HCBS-6
• Twin HSS blade adjusts automatically
• M4-M45 (Capacity:5/32” to 1-3/4”(4-45mm)
• Knurled Grip Adjustment
• Zinc body, CR-plated
HDB-1/8CDE 10 COBALT 1/8” Double End
HDB-3/16CDE 10 COBALT 3/16” HDB-3/32CDE
1/4”
HDB-1/8CSE 10
1/8” Single HDB-3/16CSE 10
3/16”
HDB-3/32CSE 10
HDB-5/32CSE 10
HDB-3CSE 10
HDB-3.5CSE 10
HDB-4CSE 10
HDB-4.5CSE 10
HDB-5CSE 10
HDB-6CSE 10
3.5mm
4.0mm
4.5mm
5.0mm
6.0mm
Ancillaries
SILICONE TOOL TRAY
• 350mm (W) x 228mm (H) x 23mm (D)
• Removable Magnetic Tray
• 8 x Slots for Screw Bits & 10 x Slots for Sockets
3m x 16mm TAPE MEASURE
• Soft Grip Handle
• Working Temperature: -40°C to 240°C
8m x 25mm TAPE MEASURE
MAGNETIC PARTS TRAY
• 240mm x 140mm
• 2 Strong Magnets
• Can be used on almost any angle
• Rubber coated magnets to prevent marking
8m x 25mm TAPE MEASURE
• Self-marking
CAR VACUUM CLEANER – 12V FOAMING SPRAY WASH GUN
• 12V/106W Powerful Suction
• Wet & Dry Dual Application
• Head Torch
• 5 Metre Long Cord
• Waterproof Carry Bag
BATTERY POWERED SOLDERING IRON
• Revolving Regulator with Portable Bottle
• Quality Brass Fitting
• Spring Loaded Adjustable Lever
• Turn Dial to Adjust Dilution
• 4.5V/6W
• Technicians & Engineers
• Mobile Technical Field Repairs
• Small Gauge Wire & Connectors
• Suitable for General Soldering
• Circuit Board Repairs
• Electronic Components
TAPE MEASURE BELT CLIP
COLLAPSIBLE BUCKET – 10L
• 10 Litre
WHEEL CHOCKS (PAIR)
• Size: 110 H x 120 W x 205 D (mm)
• Anti-slip rubber on the base prevents movement
• Suitable for cars, 4WDs, trailers and caravans
• Wheel chocks should always be used when a vehicle is on vehicle support stands or ramps
6" OSCILATING FANS
• Clip-on or dash mount
• Adjustable arm
• Cord length: 3 metres
12V FUEL PUMP
• Suitable for positive (+) or negative (-) earth
• Suits 4 and 6 CYL engines
• Suits systems 4 to 7 PSI (27.6 to 48.3kpa)
• Complete with barb fittings and in-line filter
• Not suitable for diesel
EXTENDABLE TYRE WRENCH SET
Part No. HETW
• Telescopic Wrench extends from 365mm to 530mm.
• 2x Multi-size sockets to fit 17mm, 19mm & 21mm, 23mm nuts
TRAILER CARGO NETS
HTCN-150220 150 x 220cm HTCN-200300 200 x 300cm
• Mesh Size: 4.5cm x 4.5cm
• Elastic cord diameter: 6mm
3/4" SIPHON BRASS
Part No. HSP34
• 3/4" copper head with glass ball
• Transfers any type of liquid from one container to another
• 3/4" x 1.9 metres
3/8" ADJUSTABLE MULTI FIT SOCKET
Part No. HUSS-1
• Adjustable to suit both Metric & Imperial Nuts & Bolts
• Metric: min/max: 10mm to 19mm
• Imperial min/max: 3/8” to 3/4”
BRAKE CALIPER PISTON SPREADER TOOL
Part No. HBCDS-1
• Two sizes of push plates:
• 115mm x 55mm (fixed to the ratchet)
• 178mm x 60mm (magnetic plates)
180MM CURVED HANDY FOLDING SAW
Part No. HFS-180
• Push button locking/unlocking mechanism
• Foldable blade for secure storage & easy storage
• Rubberized handle
• Durable 180mm steel blade
Part No. FP401
