Issuu

CFM - Issue 47 - Sep. 2026

CFM - Issue 47 -Sep. 2026

CFM - Issue 47 - Sep. 2026

CFM - Issue 47 -Sep. 2026

CFM - Issue 47 - Sep. 2026

CFM - Issue 47 -Sep. 2026

CFM - Issue 47 - Sep. 2026

CONTENTS Financial Report

P82-83

Cover Story

P28-29

Small Screws, Grand Vision: The Spirit of Craftsmanship Behind YOUSUN

Industry News

P30-40 China Fastener Industry News P42-48

P30-61

International Fastener Industry News

P50-55 European News P56

P58-61 Turkish News

P62-64

P62-71

Wenzhou Fengding:Focusing on the Flange Bolt Segment, Carving a Niche in Flange Bolts to Weather Industry Cycles

- An Interview with Huang Rongsheng, General Manager of Wenzhou Fengding Fastener Manufacturing Co., Ltd. P66-68

Shanghai Fast-Fix:Riveting Solutions for High-End Manufacturing, Anchoring Global Markets

- An interview with Yan Wang, General Manager of Shanghai Fast-Fix Rivet Corp. P70-71

Chaoyue Mould: Craftsmanship Forging a Globally Renowned Fastener Tooling Brand

- An Interview with Liu Yongchao, General Manager of Hebei Chaoyue Standard Fastener Mould Co., Ltd.

Technology P72-74

Global New Products and Technologies

P72-80

P76-80 Influence of Processing Quality on Fracture Behaviour of

High‑Strength Bolts - How New National Standards Are Driving the Development of the Fastener Industry

Financial Report

P82

P83

P82-83

Financial Reports of Chinese Listed Companies for the First Half of 2026

P30-61

P84-100

Insights

P84-85 China's Fastener Export Data for Jan.–Jul. 2026: Emerging Markets

Soar as Traditional Destinations Diverge

P86-88 Analysis of U.S. Fastener Import Sources in the First Half of 2026 P90

EU Fastener Import and Export Data (Jan-May 2026)

P90

U.S. Fastener Import and Export Data (Jan-June 2026)

P90

Russian News

Featured Company

Industry News

P91 P91 P91

P92-93

Germany Fastener Import and Export Data (Jan-June 2026) Japan Fastener Import and Export Data (Jan-June 2026)

Malaysia Fastener Import and Export Data (Jan-June 2026) Thailand Fastener Import and Export Data (Jan-May 2026)

Haiyan: China's Premier Fastener Hub, From "Industrial Rice" to High-End Precision Manufacturing

P94-97 New Energy and High‑End Applications:

How Fasteners Are Moving Up the Value Chain

P98-100 Tariff Differentials Reshape Global Fastener Sourcing:

Chinese Products Face Duties Ranging From 0% to 83.6%

Exhibition

P102-109

P102-104 FES 2026 Wraps Up in Shanghai,

Next Edition to Return in March 2027

P106-107 Fastener Fair India 2026: New Production Technologies Debut

at South Asia's Largest Fastener Show

P108-109 Fastener Exhibitions: October 2026 - April 2027

Certificated Active Supplier

P110-120

Financial Report of International Fastener Listed Companies

CFM - Issue 47 - Sep. 2026

COVER STORY

Small Screws, Grand Vision:

The Spirit of Craftsmanship Behind YOUSUN

n the intricate network of global manufacturing, fasteners, though small in size, are widely known in China as the "rice of industry". The development of Haiyan Yousun Enterprise Co., Ltd. ("Yousun") exemplifies this transformation, evolving from scale expansion to value enhancement. By successfully transitioning from trade to manufacturing, Yousun has carved out a distinct competitive edge in the global market through strategic focus and specialized expertise in screws. Yo u s un f a c t o r y i s s p e c i a l i z e d i n p r o d u c i n g wood timber screws, chipboard screws and dr ywall screws,bimetal screws and any customized high-end screws.

From Commercial Links to ManufacturingCentered Approaches

Yousun was spun off from CHINFAST in 2009 as a fully owned subsidiary, in response to supply chain fluctuations, rising costs, and product commercialization. By leveraging the local industrial cluster, the company evolved from a pure trader into an integrated enterprise with end-toend R&D, production, and sales capabilities. This shift not only strengthened its manufacturing foundation but also generated significant "1+1>2" synergies between trading and manufacturing, forming a sustainable engine for global expansion. With a team of over 70 people and around 150 sets of equipment, Yousun currently produces 1,000 tons monthly. The company is now pivoting towards a grander vision of intelligent manufacturing. The cornerstone of this vision is

CFM - Issue 47 -Sep. 2026

a new factory slated to commence in 2027, which will not only double output to 2,000 tons but also house its own heat treatment line, a cutting-edge lab, and an R&D hub. All dedicated to one single goal: crafting China's premier small screws.

Yousun Contact: Vicky Email: vicky@yousunfastener.com

The Premium Positioning: An Anchor of Value Amid Uncertainty

Despite turbulence in global trade and the reshaping of supply chains, Yousun is doubling down on a clear and confident strategy: a deeper push into the high-end fasteners' industry. The company's decision leverages its unique edge, particularly the benefit of the EU's AD676 average tax rate and ownership of several essential patents for small screws. Yousun's management believes enduring success in demanding markets comes from being tested and trusted. Rather than chasing every trend, the company concentrates it s resources on for tif ied, high-value segment s. Each innovation and quality upgrade strengthens its premium market position through a disciplined strategy: focused impact over broad reach, and victory by capability, not luck.

Riding the Twin Waves of Green and Intelligence

Yousun is ac tively advancing it s green and smar t transformation to meet global standards like the EU's CBAM. Key initiatives include pursuing Green Factory and ISO14001 cer tifications, tracking high-performance materials and digital technologies, and strengthening resilience of supply chain. The company is also enhancing cross-functional collaboration while investing in talent development and intellectual property to build long-term competitiveness. As one of the key enterprises in China's fastener industry, Yousun is confident that China will remain a vital global manufacturing hub in the next decade. The company believes the industry's sustainable growth depends on shifting from quantitative expansion to qualitative excellence. Guided by this philosophy, Yousun focuses on upstream industrial chain integration and core technology development, forging a path of "upward breakthrough" through specialization and sustainable practices.

INDUSTRY NEWS

CHINA FASTENER INDUSTRY NEWS

Drawing on developments within China's fastener sector from June to August 2026, CFM presents

a focused industry update. It highlights key global trends—from exhibitions and overseas capacity

deployment to supply chain upgrades and intelligent manufacturing—alongside breakthroughs in digital customs efficiency, offering actionable insights for practitioners worldwide.

2nd National Fastener Distributors Conference & Investment Matchmaking Fair Concludes in Shanghai

n June 23, the 2 nd National Fastener Distributors Conference & Investment Matchmaking Fair wrapped up in Shanghai, China. Kicking off at 14:00 local time, the event gatheredindustry exper ts, leading brand representatives and distributors across the country. It delivered approaches to operational improvement in a mature market, and built a precise, efficient platform for supply-demand matching. The keynote forum of the conference was moderated by Mr. Yang Junfeng, Chairman of CFM. Four seasoned industr y practitioners took the stage sequentially to share in-depth insights covering the full range of distributor. Wang Kaibo, Chairman of Hunan Shenyi Precision Components Co., Ltd., delivered the opening presentation focusing on refined management of fastener supply chains for OEMs. Wang Guijuan, Deputy General Manager of Nanjing Flybear Hardware / IIIBEAR Intelligent Technology, interpreted the upgrading path for traders to transition from traders to integrated manufacturing and trading service providers based on her 28 years of industry experience. Yang Haofeng, General Manager of Haiyan Fengtuo Hardware and founder of "Nut Steward", shared his experience of transforming from a distributor to a brand operator. Zhu Zhiqiang, founder of Dianjiang Consulting and management consultant, concluded

CFM - Issue 47 -Sep. 2026

the session with a detailed presentation on the implementation framework of "intensive cultivation and value symbiosis". The conference also featured a partnership and distributor recruitment session hosted by Zhu Zhiqiang. Three leading brands — Lengshuijiang Tianbao, Ningbo Taidahezhong and Letlink Fastening Technology — unveiled their regional distributor partnership programs one after another, translating the concept of "value symbiosis" into tangible cooperation opportunities.

CHINA FASTENER INDUSTRY NEWS 16th Fastener Expo Shanghai 2026 Opens in Shanghai

rom June 24 to 26, 2026, the 16th Fastener Expo Shanghai, hosted by Shanghai Ebseek Exhibition Co., Ltd., officially kicked off at the National Exhibition and Convention Center (Shanghai). Tens of thousands of industry participants from home and abroad gathered at the venue to explore new pathways for fastener industr y innovation, foreign trade expansion and technological upgrading. Ranked among the world's three major professional fastener exhibitions, this year's edition featured an expanded

exhibition space and layout. It deployed two finished fastener halls (Hall 1.1 and 2.1) and one dedicated equipment hall (Hall 3), with a total exhibition area exceeding 70,000 square meters. More than 1,400 high-quality upstream and downstream enterprises from around the world showcased cutting-edge products, intelligent manufacturing equipment and integrated supporting solutions. The show expanded its offerings in product presentation, procurement matching, industry exchange and international cooperation, continuously reinforcing FES's professional value in connecting the entire fastener industrial chain. The exhibition recorded 51,903 professional visitor entries, including 4,578 from overseas. Backed by a complete industrial chain display system, the exhibition continued to strengthen its role as a platform integrating "product display, business negotiation, technical exchange and resource cooperation". Alongside the main exhibition, multiple professional forums and supply-demand matching activities focusing on industry ecosystem, material innovation, channel transformation and product verification were held to promote business cooperation and industry exchange.

Indian Procurement Delegation Visits Gaojia Intelligent Equipment's Automatic Oil Removal Equipment

n June 26, 2026, during the 16th Fastener Expo Shanghai, an In dian p ro cure m e nt de le g at ion le d by CF M visited to Gaojia Intelligent Equipment (Jiaxing) Co., Ltd. in Zhejiang Province, China. The two sides conducted in-depth exchanges on automatic oil removal solutions for fastener production, helping connect overseas procurement needs with Chinese equipment suppliers During the on-site visit, the delegation toured the production workshop and equipment demonstration area, focusing on core products such as heading oil slingers and oil filtration machines. They learned in detail about the equipment's technical performance and practical benefits in oil recovery, iron scrap separation, labor reduction, and safe and environmentally friendly. Targeting the operational conditions and capacity demand of India's fastener manufacturing sector, Gaojia Intelligent Equipment's technical team introduced customized product solutions and after-

CFM - Issue 47 -Sep. 2026

sales service systems, and demonstrated the full equipment operation process on site. This visit serves as an offline extension of the international B2B matching services of the 16th Fastener Expo Shanghai. As core supporting equipment for the fastener cold heading process, intelligent oil removal systems can effectively address pain points of oil loss and solid waste treatment, aligning with India's development goals of cost reduction, efficiency improvement and green upgrading. It also builds a practical communication bridge for Chinese fastener equipment manufacturers to explore the emerging South Asian market.

CFM - Issue 47 - Sep. 2026

CHINA FASTENER INDUSTRY NEWS

Bulten Sells Automotive Contract Manufacturing Businesses in China and Europe

ulten AB, a leading global fastener manufacturer and distributor, recently announced a major strategic restructuring: it has signed agreements to divest its automotive contract manufacturing businesses in China and Europe respectively, marking the Swedish fastener giant's full push toward an "asset-light, high-value" strategic transformation. The company sold 100% equity of its Chinese subsidiary Bulten Fasteners (Tianjin) Co., Ltd. to a local investment group led by Kaikai Chen for RMB 1 million. The unit, with approximately 86 employees and annual revenue of around

RMB 88 million, previously supplied fasteners primarily to Volvo's China production facilities. Meanwhile, Bulten sold its European automotive contract manufacturing business to Swedish investment firm Maelir AB at an enterprise value of approximately 44.5 million euros. The transaction covers 2 sales and service companies in Sweden and Romania, as well as 4 manufacturing entities in Sweden, Germany and Poland. It involves around 1,000 employees, with annual net sales of approximately SEK 1.9 billion, accounting for 38% of the group's total net sales.

Tengda Technology to Build 18,000-Ton Annual Output Stainless Steel Fastener Base in Vietnam

n July 23, Tengda Technology unveiled the latest progress of its globalization strategy: the company plans to invest RMB 167 million to construct a stainless steel fastener production base with an annual capacity of 18,000 tons in Long Jiang Industrial Park, Vietnam. The project has already obtained ODI (Overseas Direct Investment) filing approval from China's National Development and Reform Commission and the Ministry of Commerce, and follow-up construction is proceeding steadily. The project will focus on US-standard stainless steel fasteners in sizes M4 to M24. It aims to optimize the production cost structure and enhance profitability and risk resilience by leveraging Vietnam's local tax incentives and regional trade agreement benefits. As a core pillar of Tengda Technology's internationalization strategy,

the base will enable the company to expand expand into global markets, including the Americas with stronger cost competitiveness, and further grow its market share in the global stainless steel fastener supply chain. Public records show Tengda Technology is one of the world's major stainless steel fastener manufacturers, with products widely applied in petrochemical, machinery, new energy, offshore equipment and other sectors. The Vietnam project marks the company's first overseas manufacturing base following steady domestic capacity expansion, representing a substantive shift of its internationalization strateg y from product expor t to overseas capacit y deployment. It carries far-reaching strategic significance for strengthening supply chain resilience and global market competitiveness.

Yongnian Fastener Cluster Posts 22.6% Export Growth, Adds 3 Overseas Warehouses

fficial data released on July 29 showed that from January to April 2026, the fastener industrial cluster in Yongnian District, Handan, Hebei Province recorded a total import and export value of RMB 923 million, up 23.1% year on year. Exports reached RMB 914 million, a 22.6% year-on-year increase, 14.5 percentage points higher than the city's average growth rate. To expand international market s, local authorities organized enterprises to participate in 6 key exhibitions in 34

CFM - Issue 47 -Sep. 2026

Saudi Arabia, Brazil, Germany and other destinations. The events have facilitated 281 signed orders worth approximately USD 12.27 million in total. Since the start of 2026, local enterprises have also added 3 new overseas warehouses in Saudi Arabia and Russia. To date, Yongnian enterprises operate a total of 14 overseas warehouses worldwide. The "exhibition + overseas warehouse" dual-drive model has become the core engine driving the cluster's foreign trade growth.

German "Hidden Champion" Würth Industry Opens New Hub in Foshan Sanlongwan

n July 8, Würth Industry, a leading global provider of C-class industrial material management and intelligent supply chain solutions, officially inaugurated its Foshan office in Foshan Sanlongwan Sci-Tech City (Foshan Sino-German Industrial Service Zone). The Würth Group is a German family-owned enterprise founded in 1945. It currently operates more than 400 branches worldwide, with 2025 sales reaching 20.7 billion euros. Würth (Shanghai) Industrial Fasteners Co., Ltd. (Würth Industry) is a subsidiary of the German Würth Group. In 2023, the Administrative Committee of Foshan Sanlongwan Sci-Tech City launched the *Greater Bay Area Sino-German Market Partner Program* to support German-funded enterprises in exploring the Guangdong-Hong KongMacao Greater Bay Area market. Würth Industry was among the first batch of signed "partner enterprises". Over the past three years, the committee has facilitated precise matchmaking between Würth Industry and multiple local Foshan enterprises and delivered a series of cooperation outcomes. To get closer to clients and deliver better localized services, the company decided to relocate its entire South China office from Guangzhou to the Foshan SinoGerman Industrial Service Zone. Würth Industry's Foshan office functions as a South China regional operation center integrating office space, after-sales ser vice, product exhibition and an on-site flagship store. Centered on this new hub, Würth Industry will deliver tailored services to customers across South China. Going forward, the Würth Group will further expand its footprint in South China and continuously enhance its localized service capacity as business grows.

China Customs Launches Smart Verification System for High-Strength Fasteners

he General Administration of Customs of China has fully deployed a smart classification and verification system for high-strength fasteners at 22 major ports across the country. The dedicated system covers products under HS codes 731815 and 731816. It adopts AI image recognition and material spectrum comparison technologies to automatically cross-verify the declaration information of property class 10.9 and 12.9 high-strength bolts against material certificates and heat treatment reports. Operational data shows that the average customs clearance time has been cut from 72 hours to 43 hours, while the the rate of declarations returned due to errors has dropped by 86%. CFM - Issue 47 - Sep. 2026

CHINA FASTENER INDUSTRY NEWS

2026 Inaugural Global Fastener Industry Ecosystem Conference Concludes in Shanghai

n June 25, 2026, the highly anticipated 2026 Inaugural Global Fastener Industry Ecosystem Conference came to a successful close at the National Exhibition and Convention Center (Shanghai). The event brought together over 400 fastener industr y professionals, academic exper ts and corporate leaders from China, India, Germany, the United States and other regions worldwide. During the conference, participants not only engaged in in-depth discussions on key industry challenges, but also explored a shift in thinking from "selling products" to "building ecosystems", charting a new course for the coordinated development of the global fastener industry.

CFM - Issue 47 -Sep. 2026

The conference opened with an address by a leader from the China Chamber of Commerce of Metals, Minerals & Chemicals Importers and Exporters (CCCMC). The speech, closely aligned with global industrial trends, laid a positive foundation for international collaboration in the fastener sector. In the subsequent keynote session, industry leaders from different continents delivered in-depth insights from both regional and global perspectives.

Q ia n y ua n Te c h n o l o g y C o . , L t d . , p r e s e nte dp r a c t ic al e x amp le s of AI application in fastener qualit y management, demonstrating how AI and digital technologies can enhance traditional quality control processes. Mr. Abhijat Sanghvi, Chairman of the Indian Fastener Distributors Association, presented an in-depth analysis of the channel ecosystem and cooperation opportunities in India's domestic market, providing valuable insights into the South Asian market landscape for Chinese enterprises seeking new growth opportunities.

Addressing green barriers and supply chain transformation in the European market, Mr. Thomas Haug, General Manager of F.Reyher AsiaPacific Co., Ltd., shared approaches to balancing corporate sustainability and competitiveness under stringent environmental requirement s. His prac tical approaches to building "resilient supply chains" resonated strongly with the audience.

M r. M a r i o V a r g a s , P r e s i d e n t of Fastenal (Shanghai) International Trading Co., Ltd., focused on internal enterprise management. His practice-oriented presentation titled "The Hidden Costs of Fasteners: Why Smar ter VMI Matters" directly addressed the issue of eroding profit margins, emphasizing the core value of intelligent vendor-managed inventory (VMI) systems in cost reduction and efficiency improvement.

A highlight of this conference was its connection between academic research and industrial application. Dr. Zhang Xuzeng, PhD in Industrial Engineering from Florida State University and Adjunct Professor at the College of Mechanical and Electrical Engineering of Wenzhou University, expounded on how scientific research underpins industrial development and technological breakthroughs in the fastener sector from the perspective of fundamental theoretical research, and called on the industry to attach importance to underlying scientific principles.

Regarding market access requirements for overseas markets, Ms. Huo Yuke, Head of Quality Management at the IWB Institute of the University of Stuttgart, Germany, systematically interpreted the underlying framework o f E TA ( E u r o p e a n Te c h n i c a l Assessment) certification, clarifying key market access requirements for Chinese enterprises already operating in or planning to enter the European construction fastener market.

In t h e f a s t- g row ing ar t if ic ial inte llige nce s e c tor, Mr. L i Zhengmin, Co -founder of Ningbo

In addition, Mr. Peng Shidan, General Manager of Xinggang Technology Co., Ltd., complemented a key element of the fastener industry ecos ystem — high value -added processing of raw materials — from the perspective of upstream high-end industrial wire rods.

Mr. Huang Weidong, Chairman of Cunjin Group, complemented a key element of the fastener industry ecosystem — a solid professional talent foundation — from the per spe c tive of t alent cultivation through industr y-education integration.

Mr. Yang Junfeng , Chairman of CFM (the event organizer), delivered welcome remark s, noting that the platform was established to amplify the diverse voices of the fastener industry to the world. CFM - Issue 47 - Sep. 2026

CHINA FASTENER INDUSTRY NEWS

2026 Golden Screw Award unveiled :

What are the new industry signals for the fastener sector?

he Golden Screw Award, one of China's major annual honors for the fastener sector, was cofounded in 2016 by CFM and Fastener Expo Shanghai. Held annually, the award aims to inspire innovation, set benchmarks and drive industrial upgrading. On June 25, 2026, the "2026 Xinggang Technology Screw Night & Golden Screw Award Ceremony" opened with more than 1,000 industry professionals from China and abroad in attendance. This year's selection adhered to the principle of "quality over quantity," with only seven outstanding companies chosen from numerous participating companies - underscoring their industry influence and innovation capabilities.

Shandong Tengda Fasten Tech Co., Ltd.

Benchmark Enterprise in Fastener Industry Integration Focused on stainless steel fasteners, the company has long long held the largest share of China's stainless steel fastener exports. It was listed on the main board of the Shenzhen Stock Exchange in 2024. Following its listing, it carried out industrial integration and successfully acquired companies including Jinyuan Stainless Steel Screws and Hooke Anti-loosening Fasteners, reflecting the integration trend of fastener industry resources.

Xinggang Technology Co., Ltd.

F.Reyher Asia-Pacific Co., Ltd.

Brand Revitalization Award for Highend Cold Heading Steel Wire Rod

Model of Global Fastener Supply Chain Integration

Founded in 1958, Xinggang Technology Co., Ltd. is a steel group integrating ironmaking, sintering, coking, steelmaking, rolling, power generation and R&D. A new production base with an investment of more than RMB 10 billion is currently under construction, injecting fresh vitality into a brand positioned as a global supplier of high-end quality special steel.

F.Reyher Asia-Pacific Co., Ltd. is the Chinese subsidiary of Germany's Reyher. It does not manufacture screws, but integrates around 140 core suppliers and serves more than 12,000 customers worldwide. Each year it ships 1,500 to 2,000 containers from China, defining reliability standards for Class C parts through systematic supply chain management.

Riv-link Fastening Technology (Anhui) Co., Ltd.

Leading Brand for Rivet Products Riv-link focuses on blind rivets, rivet nuts and related products. Star ting from Shanghai, it now operates five manufacturing bases across Hubei, Jiangxi, Anhui and other provinces, making it a preferrablebrand among fastener distributors. Although a relatively new name overseas, it is already a "Little Giant" in the rivet segment and is highly trusted by distributors.

Suzhou Yuefei Packaging Equipment Co., Ltd.

Innovation Award for Visual Sorting & Packaging Integrated Machine Suzhou Yuefei combines optical sorting with packaging, integrating AI visual counting and high-precision quality inspection. Its inspection performance has been widely recognized in the industry.

CFM - Issue 47 - Sep. 2026

CHINA FASTENER INDUSTRY NEWS

Zhejiang Jiancai Machinery Co., Ltd.

Zhejiang Hisener Fasten Tech Co., Ltd.

Thread Rolling Equipment Industry Leader Award (Taiwan-invested Enterprise)

Benchmark Award for Digital Factory in Fastener Industry

Founded in Taipei in 1973, Jiancai began investing in mainland China in 2001 with a plant in Shanghai, and in 2006 established a plant in Jiashan, Zhejiang, where it has since taken root and served the national market. After settling in mainland China, it was recognized as a "specialized, refined, distinctive and innovative" (SRDI) enterprise. Its thread-rolling machine for flow-drill screws used in new energy vehicles has been put into production, doubling output per machine and leading the high-end thread rolling equipment segment.

Against the backdrop of global supply chain restruc turing and intelligent manufac turing transformation, the Golden Screw Award is not only a celebration of outstanding enterprises, but also a footnote to the Chinese fastener industry's shift from "scale expansion" to "value growth." As the impassioned toast at the gala put it: "Let Chinese fasteners reach the world, and let the world's fasteners reach China."

CFM - Issue 47 -Sep. 2026

Hisener has transformed from a trading company into a large enterprise with annual sales exceeding USD 200 million. It focuses on high-quality stainless steel fasteners, with products that are CE and ETA certified. Equipped with a 23.8-meterhigh automated intelligent warehouse and ERP system, it is leading the industry's digital transformation through intelligent manufacturing.

INDUSTRY NEWS

INTERNATIONAL FASTENER INDUSTRY NEWS

North American News

Hillman Solutions Acquires Kanebridge for $315 Million, Enters Industrial Fastener Distribution

n August 2026, hardware and fastener distributor Hillman Solutions announced it had reached an agreement to acquire fastener wholesale distributor Kanebridge Corp for an estimated $315 million. The acquisition was completed on September 3, 2026. The deal established Hillman's first U.S. master distribution platform in the industrial fastener market and expanded the company's industrial addressable market to approximately $3 billion. This strategic acquisition allows Hillman to enter the previously untapped industrial market while diversifying its customer base and end-market exposure.

PrimeSource Brands Acquires Starborn Industries, Strengthening Fastener Leadership

n August 2026, PrimeSource Brands, a North A m e r ic an p rov ide r of sp e c ialt y b r an de d building products, announced the acquisition of Starborn Industries. The acquisition strengthens PrimeSource Brands' leadership position in the fasteners segment and expands its portfolio in outdoor living. Backed by Clearlake Capital Group, L.P., PrimeSource Brands further strengthened its competitive position in the construction fastener market through this acquisition.

CFM - Issue 47 -Sep. 2026

Turkey's Norm Fasteners Acquires Michigan Plant to Strengthen North American Automotive Fastener Presence

urkey's Norm Fasteners announced in August 2026 the completion of its acquisition of an automotive fastener manufacturing plant in Plymouth, Michigan. The transaction includes a 121,000-square-foot factory, production equipment, workforce and existing customer programs. The plant mainly produces high-strength bolts for the automotive industry, with full-process capabilities including cold heading, heat treatment, thread rolling, sorting and packaging. Norm Fasteners has been in the US market since 2018. This acquisition will help it shorten delivery cycles, quickly respond to order changes, and fur ther d e e p e n i t s lay o u t in North America.

INTERNATIONAL FASTENER INDUSTRY NEWS European News

Extreme Heat Triggers Power Outages Across Europe, Fastener Supply Chains Under Systemic Strain

n the summer of 2026, extreme heatwaves swept across Europe, with France, Spain, Italy and other countries experiencing power outages and rationing. In France, 11 nuclear reactors were forced to shut down or operate at reduced capacity due to high river water temperatures, cutting approximately 8.8 GW of power capacity. Spain's grid operator triggered "demand active response services" due to a sudden drop in wind power output, forcing large industrial companies to temporarily cut power. Italy's Turin, Rome and other cities

experienced prolonged power outages. This has created a triple impact on the fastener industry: on the production side, European fastener manufacturers face severe production disruptions, with German day-ahead power prices exceeding €200/MWh; on the logistics side, high temperatures combined with falling Rhine River water levels have obstructed both road and water transport; on the demand side, automakers including Stellantis and Volkswagen have suspended production, directly reducing fastener orders.

Germany's KAMAX Group Acquired by Italy's Fontana Gruppo, Deal Completed

he KAMAX Group, headquartered in Homberg, Germany, officially completed all regulatory approval procedures for its acquisition by Italy's Fontana Gruppo on June 30, 2026. KAMAX is a world-leading manufacturer of highstrength fasteners, focusing on R&D and production of complex cold-formed parts for the automotive sector. Following the acquisition, KAMAX becomes an important part of Fontana Gruppo's global footprint. The latter has 42 production sites worldwide, employs over 9,000 people and generates annual revenue of approximately 2 billion euros. This integration will further enhance both parties' technical and market competitiveness in automotive fasteners.

African News

Ghana to Begin Local Production of Industrial Fasteners in Q3 2026

ugene T. Sangmortey, Team Lead of the Ghana Partnership for Jobs and Economic Transformation Programme (Ghana Jet), announced that Ghana is set to begin local production of industrial fasteners, including bolts, nuts, etc., in the third quarter of 2026. The initiative is being spearheaded by a Ghanaian company with support from the Ghana JET Programme and international investors. The production facility has received investment backing from British International Investment (BII). 44

CFM - Issue 47 -Sep. 2026

CFM - Issue 47 - Sep. 2026

INTERNATIONAL FASTENER INDUSTRY NEWS South Africa Initiates Safeguard Investigation into Imported Cold-Rolled Iron and Steel Products

n 15 July 2026, the WTO Committee on Safeguards published a safeguard notification submitted by the South African delegation on 14 July 2026. On 10 July 2026, South Africa's International Trade Administration Commission (ITAC) issued a public notice to launch a safeguard investigation into certain imported cold-rolled products of iron and steel, pursuant to an application filed by Arcelor Mittal South Africa Ltd., a domestic producer in South Africa. The products under investigation are flat-rolled products of iron, non-alloy steel or other alloy steels (excluding stainless steel), whether in coils (including cut-to-length products and "narrow strips"), without further processing, only cold-rolled (cold-reduced), and not clad, plated or coated. The involved products are classified under South African tariff codes 7209.15, 7209.16, 7209.17, 7209.18, 7209.25, 7209.26, 7209.27, 7209.90, 7211.23, 7211.29, 7211.90 and 7225.50. The period of investigation for this case covers 1 January 2023 to 31 December 2025.

Southeast Asian News

Thailand Launches Fourth Anti-Dumping Sunset Review on Chinese Hot-Rolled Steel; High-Strength Bolt Suppliers Face Trade Risks

ecently, Thailand's Ministry of Commerce has initiated the fourth anti-dumping sunset review on hot-rolled steel in coil and non-coil form from mainland China (HS codes 7208 and 7211). This steel grade is the primary raw material for anchor bolts as well as property class 10.9 and property class 12.9 high-strength bolts supplied to the Thai market. Should the existing anti-dumping duties be extended, Chinese fastener exporters will face raw material-related trade risks, including origin compliance audits and mounting cost pressures.

China-Indonesia Joint Venture PT LJCSJ Commences Production at Marunda, Jakarta

T LJCSJ officially inaugurated its factory and office facilities at the Nusantara Bonded Zone in Marunda, North Jakarta, in July 2026. The company is a strategic joint venture between China's Lijing Group and Indonesia's CSJ Group, established to strengthen the country's manufacturing capabilities in engineering components, hub bolts, and undercarriage parts. Under the Hiro Bolt brand, PT LJCSJ produces a wide range of industrial and automotive components including hub bolts, nuts, track bolts, U-bolts, cold-headed parts and forged parts. 46

CFM - Issue 47 -Sep. 2026

PT L JC S J Gener al Manager Lu Kebing s tated that the inauguration represents a strategic step to enhance manufacturing capacity and deliver high-quality products for both domestic and international markets. He also noted that the synergy b et we en Indone sian and Chinese par tners ser ves as a crucial foundation for building a more competitive manufacturing industry.

INTERNATIONAL FASTENER INDUSTRY NEWS Malaysian Fastener Manufacturer Tong Herr Suspends Share Trading After 19% Weekly Rally

ong Herr Resources Bhd (KL: TONGHER), a Penang-based screw and bolt manufacturer, requested a trading halt on its listed shares on Thursday, pending the release of a material corporate announcement. The suspension came into effect at 12:16 p.m. local time. Prior to the trading pause, Tong Herr's shares advanced nearly 6% to RM1.90 in Thursday's session. The thinly traded stock has rallied almost 19% this week alone, pushing its market capitalisation to RM292 million.

Japanese and Korean News

U.S. Revises Steel, Aluminum & Copper Tariff Rules; Korean Fasteners and Steel-Intensive Goods Face Up to 50% U.S. Export Duties

n June 2026, a survey released by the Korea Federation of SMEs shows that since the U.S. adjusted its tariff calculation method for steel, aluminum and copper in April, a large number of South Korean small and medium-sized enterprises (SMEs) have faced tariffs of up to 50% on their U.S.-bound shipments. Products with high steel content including fasteners such as bolts and nuts, molds, and automotive parts - are particularly hard hit. According to the survey of 600 SMEs published by the federation on June 21, 20.8% of respondents reported tariff increases on their core export products, with an average rise of 16.2 percentage points. Only 2.8% of enterprises saw tariff reductions. Meanwhile, 40.5% remained uncertain about the impact, and 35.8% reported no change.

Osaka-Based Fastener Manufacturer Tsukimori Kogyo Hikes Bolt Prices; Peak Increase Exceeds 7% Starting September 2026

sukimori Kogyo Co., Ltd., a domestic fastener manufacturer based in Yao, Osaka, has issued an official price adjustment notice for its full bolt product portfolio, with the new pricing taking effect for orders received in September

2026. The company cited sustained increases in upstream steel raw material costs and logistics and freight expenses as the core drivers behind the revision. Specific adjustment ranges: hex socket bolts in property classes 4.8, 6.8, 8.8 and 10.9 will see a price rise of 6% and above; high-strength bolt assemblies, including the S10T, F10T and F8T series, will increase by more than 7%.

CFM - Issue 47 -Sep. 2026

CFM - Issue 47 - Sep. 2026

INDUSTRY NEWS

EUROPEAN NEWS

New provided by Fastener+ Fixing Magazines www.fastenerandfixing.com

UK and EU introduce tougher steel import measures

The UK and European Union have introduced major new steel trade measures, marking one of the most significant shifts in European steel policy in recent years as governments seek to protect domestic producers from surging imports and global overcapacity.

oth regimes came into force on 1st July 2026, replacing long-standing safeguard measures with strengthened tariff rate quota (TRQ) systems designed to support local steel production while maintaining access to essential imported materials.

UK cuts tariff-free import quotas by more than half

The UK government's new steel trade measure reduces tariff-free steel import quotas by 51% compared with the previous safeguard system. Imports exceeding the revised quotas will now be subject to a 50% tariff, replacing the safeguard arrangements that expired on 30th June. The measures apply to steel produc t s that can be manufactured in the UK and form part of the government's wider Steel Strategy, first announced in March. Ministers say the policy is designed to strengthen domestic steelmaking, safeguard critical supply chains and bolster industries including construction, infrastructure and defence. The UK government reports that the new system follows months of consultation with steel producers, downstream manufacturers, and international partners, including the European Union. Officials argue the changes are necessary because of persistent global overcapacity in steel production, which has led to large volumes of lower priced imports entering international markets. The UK says maintaining a viable domestic steel sector is vital for national resilience and security. Alongside the revised quotas the UK government has introduced exemptions for certain specialist steel products that are not manufactured domestically, helping manufacturers that rely on imported materials unavailable from UK producers – removing 11 individual commodity codes. The principal bar, rod and wire categories used by the fastener industry remain 50

CFM - Issue 47 -Sep. 2026

within scope. A transitional arrangement will also protect businesses importing steel under contracts signed before 14th March 2026, allowing qualifying shipments to enter without the new tariff until the end of September.

European Union adopts revised steel trade framework

At the s ame time, the European Commis sion has introduced a new steel trade measure to replace the EU's safeguard regime, with the aim of strengthening the resilience and competitiveness of the European steel sector. The new framework reduces tariff-free import quotas to approximately 18.3 million tonnes per year, representing a 47% reduction compared with the previous system. Steel imports exceeding those quotas will also face a 50% duty. According to the Commission, the measure is intended to address the continuing challenge of global steel overcapacity, which has resulted in increasing volumes of diverted imports entering the European market. The new rules cover 30 categories of steel products, including wire rod, stainless wire rod, stainless wire, cold draw wire, alloy bars, as well as stainless bars, and introduce strengthened origin requirements through the 'melted and poured' principle, helping to ensure imported products cannot circumvent the measures by undergoing limited processing in third countries before entering the EU. The Commission said the revised system seeks to strike a balance between protecting European steel producers from unfair market pressures while preserving access to imported steel for traditional trading par tners and downstream manufacturing industries.

A coordinated response

Although introduced separately, the UK and EU measures reflect a common approach to addressing the challenges facing the steel industry. Both systems significantly reduce tariff-free import quotas while increasing tariffs on volumes exceeding those allocations. Both also cite persistent global overcapacity, market distortion caused by lower priced imports and the strategic importance of maintaining domestic steel production for critical supply chains. For downstream sectors, including the fastener industry, the measures are expected to encourage greater use of domestically produced steel where available, while increasing the importance of careful procurement planning as quota allocations become more limited.

CFM - Issue 47 - Sep. 2026

EUROPEAN NEWS

Bufab acquires DC Iron

In-line with its strategy of acquiring profitable companies in attractive niches within C-parts and technical components, Bufab Group has entered into an agreement to acquire 100% of the shares in D.C. Handrails and Ironwork Parts Limited (DC Iron) – expected to be completed during July 2026.

K-based DC Iron is a distributor of wrought iron components, key clamps, handrailing and fencing for fabricators, engineering companies, and building contractors, across the UK – with net sales of GB£14.8 million (€17.3 million) in 2025 and an operating profit margin significantly above Bufab's profitability target. Based in Newcastle upon Tyne, DC Iron has achieved excellent growth and profit in recent years. Johan Sandberg, group director region UK & Ireland at Bufab, comments: "DC Iron operates in an attractive and resilient niche market with a broad and multi-faceted product range that spans across many applications and has a business model similar to Bufab's. We welcome the DC Iron team to Bufab and look forward to supporting them in their continued growth journey." Scott Collins, who will remain managing director at DC Iron, adds: "We are pleased to become part of Bufab. Throughout this process Bufab demonstrated a clear strategic vision and a strong appreciation for our culture, our people, and the relationships we have built over the years. I believe that being part of Bufab will provide opportunities to further

develop the business, expand into new markets and continue creating value for our customers and employees. I would like to thank our employees, customers, suppliers and advisers who have supported us throughout this journey. This transaction represents not an ending, but an exciting new chapter."

Q2 CBAM certificate price released with minor decrease The European Commission has published the Q2 price of CBAM certificates for 2026, set at €75.28 per tCO2e – slightly down from the Q1 price of €75.36 per tCO2e.

or 2026 CBAM certificate prices will be determined on a quarterly basis. Therefore, there will be four prices in 2026 (one per quar ter). Each price will only apply to emissions in CBAM goods imported into the Union during the quarter it relates to. "Each quar terly price will be calculated by the Commis sion as the average of EU Emissions Trading System (EU ETS) auction clearing prices," comment s t he Europ ean Commis sion.

CFM - Issue 47 -Sep. 2026

"This ensures a fair and consistent alignment with the EU carbon market. From 2027 onwards, the Commission will calculate and publish weekly prices." Although authorised CBAM declarants will only begin purchasing CBAM certificates from February 2027 (covering their 2026 imports) the Commission hopes that early publication of these costs will enhance transparency, provide stakeholders with timely information and reduce the risk of inconsistent or unofficial price estimates circulating in the market.

EUROPEAN NEWS

Hilti Q1 sales grow In the first four months of 2026 Hilti Group increased sales by 4.7% in local currencies. Due to the ongoing appreciation of the Swiss franc, against all major currencies, the negative currency effect rose to 6.2 percentage points. In Swiss francs, total sales reached CHF 2.068 billion (€2.243 billion).

n the Americas, Hilti Group increased sales by 9.6% in local currencies. In Europe, given the continued soft construction market, growth was at 0.8% in local currencies. In the Middle East/Africa region, sales grew at a double-digit rate (+17.5% in local currencies). Asia-Pacific recorded growth of 6.6% in local

currencies in what remained a heterogeneous environment. For the remainder of 2026 Hilti Group expects low to mid single-digit sales growth in local currencies in the current uncertain global environment.

Bulten wins administrative court ruling in customs dispute

Bulten Group has secured a favourable ruling from the Administrative Court in Stockholm in its dispute with the Swedish Customs over anti-dumping duties on imports of materials from China.

he cour t upheld Bulten's appeal and annulled the customs authority's decision covering SEK 35 million (€ 3.17 million) of duties for the 2022 – 2024 period. The judgment means, if it becomes legally binding, that Bulten will receive a refund of previously paid and expensed customs duties as well as interest, totalling approximately SEK 35 million. "This is a pleasing and welcome announcement from the Administrative Court. The judgment confirms our view that we have classified our products correctly in accordance with the applicable regulations," says Axel Berntsson, president and CEO at Bufab. The Swedish Customs are able to seek leave to appeal the judgment.

Bulten to divest Chinese manufacturing operations

Bulten has entered into an agreement to divest 100% of its shares in Bulten Fasteners (Tianjin) Co Ltd to a local investor group led by Kaikai Chen, as part of the organisation's ongoing work to focus on selected core operations. The purchase price amounts to RMB 1 million (€129,000). 54

CFM - Issue 47 -Sep. 2026

For the financial year 2025, Bulten Fasteners (Tianjin) generated revenue of approximately RMB 88 million (€11 million). The divestment supports Bulten's ambition to reduce complexity and capital intensity while strengthening focus on activities with higher long-term value creation potential. The transaction is subject to customary closing conditions and regulator y approvals in China and is intended to be completed no later than the end of August 2026.

Management buyout of Anochrome Group Private equity firm Endless LLP has supported a management buyout of the Anochrome Group, a UK headquartered surface finishing and coatings specialist. The transaction represents a transition from long-standing family ownership and the start of a new phase for the business.

nochrome, which has its headquar ters in Wolverhampton, has been trading for over 80 years – providing high-quality surface coatings, corrosion protection and threadlocking sealants services to a diverse customer base across a range of sec tors, including automotive, construction, industrial fixings, motor sports and renewables. It operates from sites in the UK, Poland and Czech Republic and is recognised for its technical expertise, strong customer relationships and commitment to quality and service. The business will continue to be led by its existing senior management team, headed by Mark Jones, who will partner with Endless to deliver Anochrome's growth strategy. Long serving team members Steve Norman, Kev Walton and Paweł Jagustyn will support Mark in overseeing the six companies within the Group: Anochrome Limited, Anotec, Inlex Locking, Wolverhampton Electro Plating, Anocote CR and Anocote PL. Mark Jones, group chief executive of Anochrome, comments: "This transaction represents not a change in

direction, but an exciting new chapter built upon strong foundations. With the support of Endless, we are exceptionally well positioned to accelerate future investment, strengthen our capabilities and continue delivering long-term innovation and growth across the Group." He continues: "On behalf of the entire team at Anochrome, I'd like to thank outgoing owner Rob Gray for his exceptional leadership and personal commitment to the business over the last 35 years. I, alongside the senior leadership team, are committed to building upon the proud legacy and reputation of the business for many years to come." Rob adds: "It's been a privilege and honour to lead the business. It's been a fantastic journey and my huge thanks go to ever y single person who has been a part of it. The management team I leave behind is absolutely fantastic. I know the business is in safe hands and I wish the new ownership every success for the future."

CFM - Issue 47 - Sep. 2026

INDUSTRY NEWS

RUSSIAN NEWS

Provided by Alexander Ostashov, Chief Editor of "Fasteners, Adhesives, Tools and…" Magazine, www.fastinfo.ru

Russian riveting machines – an example of the development of the Russian machine tool industry

t a meeting with Putin, the Minister of Industry and Trade, Anton Alikhanov, highlighted industries that need to be localized as much as possible in Russia. He specifically singled out machine tool manufacturing. "The equipment, we have created, includes specialized riveting machines that allow for the rapid assembly of aircraft fuselages and wings. Such technologies were previously available to only three countries. And now, in addition to building our own aircraft, we also build them using our own equipment," Alikhanov said. The automated rivet setting system is a new product from the engineering company Aviation Consulting-TECHNO. Riveted joints are currently the primary fastener for aircraft structures. Most rivets are installed manually. According to open sources, only 25-30% of rivets, installed by leading foreign aircraft manufacturers, are installed automatically. In the domestic aircraft industry, this figure is significantly lower.

Conference "Joining Aluminum Structures" invites you to participate

he international conference "Joining Aluminum Structures" will be held in Moscow from November 24–26. This is a professional platform for those involved in the design, production, joining and inspection of aluminum structures—from material and technolog y selection to quality assessment and performance evaluation of the finished product. The conference will focus on modern aluminum joining technologies and practical solutions for industry. Particular attention will be paid to the practical application of these technologies in construction, transportation, automotive, shipbuilding, aviation and other industries.

CFM - Issue 47 -Sep. 2026

New Director at the Rechitsa Hardware Plant

he Rechitsa Hardware Plant has a new director, Ivan Vasilyevich Lenkov. First Deputy Minister of Industry of the Republic of Belarus Viktor Viktorovich Shchetko addressed the plant's employees with a farewell speech, urging them to work from the very beginning to meet the Ministry's targets. Lenkov replaces Viktor Samonchik, who headed the plant for 14 years. Samonchik traditionally handed over the symbolic helm to the new plant director. The Rechitsa Hardware Plant is one of the world's largest nail manufacturers.

Global chemical anchor manufacturer expands operations in the Russian market

urrently, a large share of the Russian chemical anchor market is made by products manufactured at the METSAN plant in Turkey. This company will celebrate its 35th anniversary in 2026. Today, the METSAN plant is a major global manufacturer, ranked among the top 5 global full-cycle manufacturers of chemical anchors. "What's unique about our business is that the plant's products are sold primarily under partner brands (OEMs), rather than under our own brand," - noted Grigory Berkut, Head of the METSAN plant's export office in Russia and CEO of EMS FORCE RUS LLC, in an interview with Alexander Ostashov, Chief editor of "Fasteners, adhesives, tools and…" magazine. - "Our products are in high demand. All other global manufacturers are located in Europe and are currently experiencing difficulties with regular deliveries." Regarding the issue of localizing chemical anchor production, Grigor y Berkut emphasized the product range and quality: "Almost all manufacturers that have emerged in Russia produce chemical anchors exclusively using epoxy resin. Meanwhile, the hardener, high-quality epoxy compounds, and even the tubes are imported. Without the manufacture of chemical components, this is not the most complex technological production. Russian epoxy components are not yet of sufficient quality to produce high-quality Pure EPOXY. As a result, the market is filled with compounds with the same name but completely different characteristics. Consumers are accustomed to considering Pure EPOXY as the standard, but actual quality depends on the specific manufacturer. Furthermore, epoxy compounds have limitations and do not meet all needs."

INDUSTRY NEWS

TURKISH NEWS

News provided by Fastener Europe Magazine www.fastenereurope.com

Türkiye automotive industry July report

n the Januar y–July 2026 per iod, tot al automotive production decreased by 8%, while automobile production declined by 19% compared with the same period of the previous year. During this period, total production stood at 767,216 units, while automobile production amounted to 424,667 units. In the Januar y–July 2026 period, the total market decreased by 11% compared with the same period of the previous year, reaching 661,249 units. During this period, the automobile market contracted by 12%, reaching 502,712 units. In t h e co mm e r c ial v e hi c le s e g m e nt , p r o du c t io n increased by 9% in the January–July 2026 period, while heavy commercial vehicle production increased by 4% and light commercial vehicle production increased by 10% compared with the previous year. During the January–July period, the

CFM - Issue 47 -Sep. 2026

commercial vehicle market declined by 5%, while the heavy commercial vehicle market decreased by 8% and the light commercial vehicle market declined by 5%. In the January–July 2026 period, total automotive exports decreased by 14% in unit terms compared with the same period of the previous year, while automobile exports declined by 29%. During the January–July period, total automotive exports amounted to 542,401 units, while automobile exports stood at 255,679 units. According to data from the Uludağ Automotive Industry Expor ters' A ssociation (OIB), total automotive expor t s increased by 2% in US dollar terms compared with the same period of the previous year, reaching USD 23.9 billion in the January–July 2026 period. During the January–July period, automobile exports decreased by 9%, reaching USD 6.3 billion.

CFM - Issue 47 - Sep. 2026

TURKISH NEWS

Türkiye steel industry June report

teel Production

Foreign Trade Balance

In June 2026, Türkiye's crude steel production increased by 14.7% compared with the same month of the previous year, reaching 3.3 million tonnes. In the first half of the year, production increased by 8.1%, reaching 19.8 million tonnes.

The export-to-import coverage ratio, which stood at 80% in the January-June period of 2025, increased to 83% in the same period of 2026, supported by the upward trend in exports.

In June 2026, f inished steel produc t consumption increased by 0.4% compared with the same month of 2025, reaching 3.1 million tonnes. In the first half of the year, finished steel product consumption increased by 6.6%, reaching 19.9 million tonnes.

The Turkish steel industr y increased its crude steel production by 14.7% year-on-year in June, reaching 3.3 million tonnes. As a result, production in the first half of the year increased by 8.1% to 19.8 million tonnes. With this performance, Türkiye maintained its position as the world's seventh-largest crude steel producer, ahead of Germany. A positive picture also emerged in steel product exports, with exports increasing by 28.4% in June. The decline recorded during the first five months of the year was reversed thanks to the strong performance in June, resulting in a 2.5% increase in exports during the first half of the year. Strong demand, particularly from the Middle East and South American markets, was a key factor behind this development. In June, exports to the Middle East increased by 80% to 212,600 tonnes, while exports to South America surged by 406% to 182,500 tonnes. During the first six months of the year, the United Kingdom and South America were among the standout markets, with exports to the UK increasing by 246% to 407,000 tonnes and exports to South America rising by 81% to 643,000 tonnes. In contrast, the European Union market continued to show a weak performance. During the first half of the year, steel product exports to the EU declined by 22% to 2.6 million tonnes, making the EU the only regional market where Türkiye recorded a decrease in exports.

Steel Consumption

FOREIGN TRADE Exports

In June 2026, steel product exports increased by 28.4% in volume terms compared with the same month of 2025, reaching 1.7 million tonnes, while their value increased by 29.7% to USD 1.2 billion. During the January-June period, steel product exports increased by 2.5% in volume terms compared with the same period of 2025, reaching 7.8 million tonnes, while their value increased by 1.3% to USD 5.3 billion.

Imports

In June 2026, steel product imports decreased by 0.8% in volume terms compared with the same month of 2025, reaching 1.8 million tonnes, while their value increased by 3.7% to USD 1.2 billion. During the January-June period, steel product imports increased by 0.3% in volume terms compared with the same period of 2025, reaching 9.3 million tonnes, while their value decreased by 2.4% to USD 6.3 billion.

CFM - Issue 47 -Sep. 2026

ASSESSMENT

Türkiye Fastener Industry

he fastener industry in Türkiye is a horizontal link within the industrial supply chain. Millions of vehicles in the automotive industry, millions of structural components in construction, millions of tons of production in the iron and steel industry, and high-tech products in the aerospace sector continuously generate demand for fasteners with different specifications. Therefore, the performance of the sector should not be assessed solely based on its own production volume, but also in relation to the per formance of the major industries it supplies. In Türkiye's fastener trade, HS Code 7318 ser ves as the main reference point. This tariff heading covers screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers and similar products made of iron or steel. Trade Map data included in the Turkish Ministr y of Trade's 2025 country profiles show that Türkiye's expor t s in the HS Code 7318 produc t group reached approximately USD 776 million in 2024. For example, Switzerland's imports of products under HS Code 7318 from around the world amounted to USD 530.2 million in 2024, while Türkiye's exports to Switzerland stood at only USD 7.4 million. This indicates that there is still significant untapped export potential for Türkiye in the European market. The geographical distribution of Türkiye's fastener exports also highlights the sector's Europeoriented structure. Germany remained Türkiye's largest market, with approximately USD 280 million in exports, while increases were also recorded in markets such as France, Italy and the United Arab Emirates. In contrast, exports to the United States declined during the same period. One of the sector's most significant advantages is its geographical proximity to Europe, as well as its access to strong customer industries such as automotive, household appliances, machinery, construction and energy. At the same time, Türkiye's fastener industry faces intense cost competition from major Asian producers, particularly China and Taiwan. Price pressure is especially high in standard products. Therefore, it does not appear sustainable for Türkiye to base its competitive advantage solely on low production costs. High-strength products, special component s, automotive fastener s,

specialized products for the energy sector, stainless steel fasteners, advanced coating technologies and engineering solutions are expected to become increasingly important for the sector's future growth. Another advantage for Türkiye's fastener industry is the diversity of its export markets. Trade shipment data shows that Turkish fastener exports are distributed across a wide range of countries, with Russia, Central Asia, the Middle East and North Africa offering important oppor tunities alongside the European market. At the same time, geopolitical developments, freight costs, EU trade policies, anti-dumping measures and carbon regulations are directly influencing the sector's export strategy.

CFM - Issue 47 - Sep. 2026

FEATURED COMPANY Wenzhou Fengding:

Focusing on the Flange Bolt Segment, Carving a Niche in Flange Bolts to Weather Industry Cycles - An Interview with Huang Rongsheng, General Manager of Wenzhou Fengding Fastener Manufacturing Co., Ltd.

n 2026, as homogeneous competition in the fastener industry becomes increasingly fierce, one company remains steadfastly on its chosen path. Wenzhou Fengding Fastener Manufacturing Co., Ltd. has stayed deeply rooted in the niche flange bolt segment, steadily navigating industry cycles with a "small but specialized, focused and resilient" approach. From it s Wenzhou headquar ters to its Jiang xi production base, and from traditional manufacturing to products for the new energ y sector, how has Fengding built dif ferentiated competitiveness through specialization? With these questions in mind, CFM inter viewed Huang Rongsheng, general m a n a g e r o f W e n z h o u F e n g d i n g Fa s t e n e r Manufacturing Co., Ltd.

Focus on Flange Bolts

Over the past two years, competition in the fastener industr y has intensified, with persistent price wars and commoditization. Huang said Fengding remains committed to t h e sp e c iali ze d f lange b o lt r o u te, avoiding b lin d expansion of its product range and instead fortifying its core competencies.

CFM - Issue 47 -Sep. 2026

The company has steadily implemented its two-base production layout in Wenzhou and Jiangxi, continuously improving automated production lines, upgrading core processes such as heat treatment and surface treatment, and focusing on enhancing product consistency. At the same time, it has increased R&D investment to develop customized flange fasteners for demanding applications such as new energy and automotive components. On the operational side, Fengding enforces stringent qualit y control, optimizes deliver y lead times, retains high-quality customers in China, and steadily expands its export business. Against a challenging industry backdrop, the company has achieved steady growth by relying on differentiated products. "We have always believed that only by focusing on a niche segment and refining product quality can a company ride out industry cycles," Huang emphasized.

Wenzhou-Jiangxi Dual-Base Synergy

Discussing Fengding's long-term strategic layout of two production bases in Wenzhou and Jiangxi, Huang introduced the positioning and capacity division of each site. The Wenzhou headquarters serves as the operations and R&D center, mainly responsible for new product development, sampling and prototyping, production of high-end orders, and commercial coordination with domestic and international customers. Leveraging Wenzhou's well-developed supply chain, the Wenzhou base can quickly respond to sample requests and small-batch, high-end orders, focusing on flange bolts with high technical barriers.

Deep Roots in Automotive and New Energy Sectors

Jiangxi Fengding Technology, meanwhile, is positioned as a large-scale mass production base with extensive plant facilities, mainly handling high-volume, mature orders. By capitalizing on regional and energy advantages, it leverages production scale to effectively reduce manufacturing costs and deliver stable high-volume supply. The two sites complement each other: Wenzhou focuses on R&D and high-precision orders, while Jiangxi handles high-volume production. This creates a structure in which new products can be iterated quickly and large orders can be delivered reliably, with dual-base synergy ensuring supply for customers at home and abroad.

Overcoming Three Key Flange Face Technical Challenges

Compared with standard hex bolts, the core technical challenges of flange bolts are concentrated in the flange face. Huang analyzed them from three perspectives. First, flange head forming: the flange face must be flat and uniform, with no folds, laps or underfill. Second, heat treatment: because the flange and the shank dif fer significantly in section thickness, quenching can easily produce uneven hardness and residual stress, directly affecting fatigue performance. Third, coating thickness uniformity on the flange bearing sur face mus t be controlled, as it direc tly af fec t s the consistency of corrosion protection. After years of process know-how accumulation, Fengding has developed its own technical strengths. In cold heading, the company uses a progressive extrusion process to ensure a flat and smooth flange face. In heat treatment, it applies zoned temperature control to reduce hardness deviation between the surface and the core. It has also optimized the pre-plating degreasing process to ensure uniform coating coverage across all areas of the flange. For high-strength property class 10.9 and property class 12.9 flange bolts, Fengding is able to ensure anti-loosening and fatigueresistant per formance with good product consistency, earning recognition from OEM customers.

Fengding's products are mainly used in passenger car components, new energy motors, PV inverters, construction machinery, power distribution cabinets and related electrical accessories. Among these, automotive chassis and traction motors are key segments for the company. Huang pointed out that motors are subject to longterm high-frequency vibration, making flange bolts highly prone to loosening. By optimizing thread parameters and heat treatment processes, Fengding's products have passed vibration durability tests of more than 10,000 cycles and can meet long-term anti-loosening requirements. Several component manufacturers have used Fengding's products on a long-term basis, reporting low failure rates and excellent batch-to-batch consistency. In the PV industr y, outdoor service conditions involve large temperature differentials and impose stringent requirements on corrosion protection and clamping performance. Fengding's customized high-strength flange fasteners can adapt to complex long-term outdoor environments. Thanks to consistent quality, Fengding has gained a large number of long-term customers.

Three-Dimensional Upgrades to Match Emerging Fields

To meet the higher requirements for strength, corrosion resistance, lightweighting and consistency in emerging fields such as new energy, automotive lightweighting, PV energy storage and industrial automation, Fengding has carried out targeted upgrades in three areas: materials, heat treatment and surface corrosion protection. For raw materials, the company selects high-quality alloy steel and strictly controls impurities. In heat treatment, it has upgraded to continuous mesh-belt quenching and tempering lines with real-time temperature control, narrowing the hardness fluc tuation range of each batch and fur ther improving fatigue life. For surface treatment, in addition to conventional zinc plating, it has developed coating processes with high salt-spray resistance to meet the long-term corrosion protection needs of PV and outdoor equipment.

CFM - Issue 47 - Sep. 2026

FEATURED COMPANY

In te r ms of lig ht weig ht ing , Fe ngding wor k s w it h customers to optimize flange geometry, saving material while ensuring joint safety. At the same time, the company has strengthened full-process quality inspection by adding tensile testing machines, salt spray chambers and metallographic inspection equipment, consistent and verifiable, in line with stringent industry standards.

Expanding into Overseas Markets

At present, Fengding's exports are mainly sold to Europe, South Korea and other regions, with customers consisting primarily of traders and component processors. Relying on its specialization in flange bolts and consistent quality, the company is gradually building its reputation overseas. Regarding future over seas expansion, Huang said Fengding will continue to deepen its presence in mature market s in Europe and Nor th America, while steadily exploring Southeast Asia, the Middle East and Latin America. As the new energy industry grows rapidly overseas, demand for flange fasteners is strong, making it a key target segment for Fengding. In terms of channels, Fengding will actively participate in overseas fastener trade shows, use industry platforms to connect with end customers, and gradually reduce intermediate layers by engaging directly with overseas manufacturers.

CFM - Issue 47 -Sep. 2026

Future Outlook

Looking ahead to the next three to five years, Huang made it clear that Fengding will remain committed to the specialized path of flange fastener manufacturing. In terms of scale, the company will fully unleash the capacity of its Jiangxi base, rationally expand automated production lines and moderately increase overall capacity. In terms of product mix, it will vigorously expand high-valueadded products for new energy vehicles, energy storage and PV applications, while continuously reducing the share of lowmargin commodity fasteners. In terms of market layout, it will deepen cooperation with leading component manufacturers in China and steadily develop emerging regional markets overseas, promoting balanced growth between domestic and international markets. In terms of brand building, Fengding will adhere to a quality-first approach, build a benchmark Chinese manufacturer of high-strength flange bolts, and make "Fengding" a trusted flange fastener brand among customers at home and abroad.

Specialization is the Path to Survival

At the end of the interview, Huang shared his insights on industry development. He pointed out that the fastener industr y is undergoing an accelerated reshuffle, and the era of competing purely on low prices will eventually pass. In the future, the core of industr y competition will be comprehensive strength in specialization, consistent quality, and rapid R&D and support capabilities. For long-term development, Huang said, companies should avoid the trap of pursuing an overly broad product range. The sustainable approach is to identif y a niche segment, deepen cultivation, continuously invest in process R&D, implement refined management, and build irreplaceable competitive strengths. Fengding will remain down-to-earth, focus on the high-strength flange bolt segment, pursue continuous improvement, and work with upstream and downstream partners to jointly advance China's high-end fastener industry.

CFM - Issue 47 - Sep. 2026

FEATURED COMPANY

Shanghai Fast-Fix:

Riveting Solutions for High-End Manufacturing, Anchoring Global Markets - An interview with Yan Wang, General Manager of Shanghai Fast-Fix Rivet Corp.

n high - end e quipment manuf ac tur ing , a seemingly small rivet often determines the connection reliability of a UAV, a high-speed train or a photovoltaic system. Since its establishment in 1997, Shanghai Fast-Fix Rivet Corp. has remained deeply focused on the riveting sector, evolving from a standard rivet manufacturer into a total riveting solutions provider. As global demand grows for lightweight, high-reliability and corrosionresistant fasteners, how is Fast-Fix strengthening its competitive edge? In this issue, CFM speaks with Yan Wang, General Manager of Shanghai Fast-Fix Rivet Corp. Wang told CFM that in it s early years the company focused on rivet R&D and manufacturing, continuously refining its full-process capabilities in materials, forming and surface treatment. After years of iteration, it has gradually transformed from a standard rivet producer into a professional ser vice provider integrating R&D, customized production and complete riveting solutions. "Our core business positioning is very clear: we focus on all types of rivet fasteners, balancing highvolume delivery of standard parts with custom development of non-standard products, and serving industrial customers both at home and abroad," he said.

CFM - Issue 47 -Sep. 2026

High-Strength Structural Rivets

According to Wang, Fast-Fix's product portfolio covers open-end blind rivets, closed-end blind rivets and structural rivets, in materials including carbon steel, stainless steel, aluminum, copper, A280 and Monel, covering most industrial riveting scenarios such as aerospace and defense, rocket launch, high-speed rail, automotive, photovoltaic and renewable energy. Among them, high-strength structural rivets are the company's core strength, mainly targeting aerospace, highspeed rail, automotive and other high-end equipment applications that demand ex tremely high connec tion reliabilit y. Such product s face stringent requirement s for tensile and shear s t reng t h and v ibr at ion f at ig ue resistance. Wang said Fast-Fix has achieved industry-leading performance in key indicators. From wire selection, cold heading and heat treatment to mandrel break point control and surface treatment, the entire production process system is mature and stable, enabling excellent product consistency under high-volume production. "We can not only consistently deliver high-standard mechanical performance, but also effectively avoid risks

such as rivet shank fracture, joint s lip p a g e a n d f a t ig u e f a ilur e in riveted assemblies, fully meeting the stringent reliability and durability tes ting requirement s of the rail transit and automotive industries," he said.

Non-Standard UAV Case

Wang shared with CFM a custom development case for a European industrial UAV manufacturer. The customer needed a completely new rivet developed from scratch. It had to achieve extreme lightweighting to reduce overall aircraft weight, while offering excellent mechanical load-bearing capacity and vibration fatigue resistance. Outdoor operation required high corrosion resistance, and the head had to adopt a flush, streamlined structure to reduce aerodynamic drag. Af ter receiving the requirement, Fast-Fix provided full-process ser vices from preliminar y FTO (freedom-tooperate) patent risk screening, special material selection and streamlined structural design, to tooling development, multiple rounds of sample iteration, full mechanical, salt spray and wind-induced vibration simulation testing , and finally volume production. "During development, we had to repeatedly balance multiple competing technical requirements—lightweighting, strength, corrosion protection and low wind resistance. The custom rivet ultimately passed the customer's complete laborator y validation and was successfully applied. This project fully demonstrates our full non-standard solution capabilities for overseas high-end equipment customers," Wang said.

Four High-Value Segments

In recent years, Fast-Fix has focused its R&D investment on four high-value segments: aerospace, rail transit (highspeed rail), automotive, and photovoltaic and renewable energy. Wang said that in aerospace and UAV applications, the company is concentrating on lightweight specialt y riveting materials, solving the conflict s among weight reduction, high strength, corrosion resistance and low-

drag streamlined structures. For the high-speed rail and automotive industries, it is focusing on high-performance structural rivets, continuously optimizing cold heading and heat treatment processes, strictly controlling mechanical property dispersion, and improving vibration and fatigue resistance.

Global Footprint

Fast-Fix products are aimed at the global market. Europe and the United States are its core overseas markets, while its business also covers South America, the Middle East, Asia and Africa, among others. Wang acknowledged that different regions differ significantly in quality thresholds, applicable standards and certification requirements. European and Amer ican cus tomer s value me chanical per for mance, batch-to-batch consistency, surface corrosion protection, test reports and intellectual property compliance. South American and Middle Eastern customers are more concerned with cost and delivery lead times. Some Asian and African customers focus on compatibilit y with local assembly practices and industry standards. To this end, Fast-Fix has established a flexible adaptation system. For European and American customers, it strictly benchmark s it s produc t s against local standards and provides complete material certifications, salt spray test reports and mechanical test reports, as well as FTO patent risk screening. For South America and the Middle East, it optimizes the supply chain while ensuring baseline quality. For Asian and African markets, it flexibly switches between metric and inch specifications to suit customers' existing assembly conditions.

CFM - Issue 47 - Sep. 2026

FEATURED COMPANY Emerging Sectors

For high-grow th downstream s e c to r s s u c h a s n e w e n e r g y, photovoltaic and energ y storage, rail transit and high-end electronics, Wang said Fast-Fix has introduced dedicated products and solutions. For example, for photovoltaic and energ y storage equipment, it has developed aluminum-stainless s te el comp osite r i ve t s re sis t ant to environment al cor rosion. For rail transit, it has introduced highstrength structural rivets. For new energ y equipment, the company applies strict controls to mitigate hydrogen embrit tlement risk and optimize surface treatment. In entering these emerging s e c t o r s , Fa s t- F i x's a p p r o a c h i s clear: first, engage early in customers' R&D stage to support selection and prototyping; second, strengthen material, coating and mechanical verification capabilities; third, track industry standard updates and iterate products accordingly; and fourth, incorporate patent risk assessment to reduce intellectual property risks when productsenter domestic and overseas markets.

Future Outlook

Looking ahead to the nex t three years, Wang said Fast-Fix will, on the one hand, continue to consolidate its manufacturing foundation in China, upgrade production lines and enhance rapid delivery capability for custom nonstandard products. On the other hand, it will expand its overseas market presence, improve its overseas customer service system and strengthen the international influence of its own brand. At the same time, it will increase R&D investment and continue to launch new riveting solutions for emerging sectors.

CFM - Issue 47 -Sep. 2026

Regarding global rivet industr y trends, Wang sees four clear shif t s. First, downstream customers are no longer buying just a rivet; they increasingly need complete connec tion solutions. Second, demand for corrosionresistant, fatigue-resistant and lightweight high-end fasteners continues to rise. Third, companies expanding overseas are paying more attention to intellectual property FTO risks. Fourth, customers are placing higher demands on supply chain stability and traceability. "The era of competing purely on price is gradually passing. Companies with full-chain capabilities in materials and process R&D, testing and verification, and patent risk management will gain greater opportunities in the global market," Wang said. From standard rivet s to total solutions, and from manufacturing in China to a global footprint, Fast-Fix is continuing to advance along a path of high-end, customized and international development.

CFM - Issue 47 - Sep. 2026

FEATURED COMPANY

Chaoyue Mould:

Craftsmanship Forging a Globally Renowned Fastener Tooling Brand - An Interview with Liu Yongchao, General Manager of Hebei Chaoyue Standard Fastener Mould Co., Ltd.

ounded in 2008 by the company chairman Zhang Tiechui together with veteran mould industry experts from China's Taiwan and Hong Kong regions, Hebei Chaoyue Standard Fastener Mould Co., Ltd. is headquartered in Renqiu, Hebei Province. Its site covers a total area of 12,800 square meters, including 7,200 square meters of workshop space. The company operates nearly 20 vacuum quenching and tempering units and six supporting vacuum titanium coating lines. In 2024, it recorded annual sales of RMB 25 million, with a solid Chinese market presence and exports accounting for more than 40% of total revenue. After 17 years of focused development, Chaoyue has grown into a key player in China's screw die and mould sector. On the production front, as of October 2023, its daily output capacity reached 20,000 titanium-coated punches, over 300 tungsten carbide heading dies, and 200 sets of thread rolling dies. Following the commissioning of fully automatic CNC equipment in March 2025, thread rolling die capacity

CFM - Issue 47 -Sep. 2026

is on track to double. In the market, Chaoyue serves major industrial clusters across Hebei, Tianjin, Jiangsu and Zhejiang in China, and expor ts to Vietnam, Thailand, Indonesia, Malaysia, India and the Taiwan region of China. In late 2023, it launched a local sales subsidiary in Thu Dau Mot City, Binh Duong Province, Vietnam, officially kicking off its localized overseas operations. Quality and responsive ser vice form the foundation o f C ha o y u e's co m p e t i t i v e e dge . I t s b la c k t i t a nium coated punches outper form more than 95% of Chinese and global peers in carbon steel screw applications, and enjoy an outstanding reputation among manufacturers of drywall screws and chipboard screws across China's core manufacturing regions. Its complementary product range – including tungsten carbide heading dies and high-speed steel thread rolling dies – is also widely recognized for its strong price-performance ratio. For quality assurance, the company works with fixed cer tified raw material suppliers, applies standardized production protocols across all processes, and delivers regular technical upskilling for its workforce. On the service side, Chaoyue runs local sales outlets in Kunshan (Jiangsu), Dongguan (Guangdong) and Thu Dau Mot (Vietnam). Going forward, it plans to build branch production facilities in highdensity customer areas to shorten lead times and serve smallbatch, custom fastener manufacturers. Technological innovation is the core driver of the company's long-term growth. Co-developed with GemDuo Co., Ltd. (subsidiary of Gem-Year Industrial Co., Ltd.),

Chaoyue's cross-recess punch with dual ejector pins is engineered for two-die two-blow cold headers running at up to 350 strokes per minute (SPM), and a patent application has been successfully filed for the design. Looking ahead, the company will introduce advanced titanium coating equipment from a European supplier to extend the service life of titanium-coated punches in stainless steel fastener production. It will also deepen collaboration with innovative fastener manufacturers and R&D partners to accelerate industry-wide technological upgrading and suppor t China's fastener sector in its transition toward Industry 4.0. Chaoyue has laid out a clear market expansion framework anchored by its Hebei headquarters, R&D and manufacturing bases in Kunshan and Dongguan, and an overseas growth hub in Vietnam. Within China, the company outlined plans in 2025 to set up new sales offices in Chongqing, Jiangxi and Anhui. Internationally, it will use its Vietnam entity as a springboard to expand across Southeast Asia. Under its "three plants in three years" strategy launched in 2024, construction of production bases in Kunshan, Dongguan and southern Vietnam is progressing steadily, with

the management team advancing site selection and talent recruitment to ensure smooth execution. Looking forward, Chairman Zhang Tiechui – drawing on over 40 years of industr y experience – forecasts that demand for fasteners will continue to grow over the next 20 years, fueled by emerging sectors such as new energy vehicles, smart devices, artificial intelligence, wearable and implantable medical devices, bionic robotics, and advanced air-ground mobility systems. To capture this opportunity, Chaoyue prioritizes talent development, nur turing young technical professionals through a structured mentoring and apprenticeship model. The company will also deepen its strategic par tnership with CFM, promoting its brand through an integrated threechannel approach: digital platforms, CFM and Fastener Expo Shanghai. Guided by the vision of becoming a globally renowned fastener mould enterprise and a full-service provider to screw manufacturers worldwide, Chaoyue is committed to building a Chinese mould brand that will endure for a century "Against the backdrop of a thriving global fastener industry, Chaoyue will stay true to the values of innovation, quality and service, and work alongside industr y par tners to shape a better future," said General Manager Liu Yongchao.

CFM - Issue 47 - Sep. 2026

TECHNOLOGY

Global New Products and Technologies A

gainst the backdrop of manufacturing's shift toward intelligence and sustainability, the fastener industry is transforming. This issue of CFM showcases innovations from late 2025 to early 2026 that define current trends. Let's take a look at the cutting-edge technologies driving the fastener sector forward.

SFS Introduces ErgoDek® Next-Gen Metal Deck Fastening System

Global fastening technology leader SFS Group has unveiled ErgoDek®, an ergonomic fastening tool purpose-built for metal deck lap joints, marking a new era of safer, more efficient and innovative installation for metal roofing and wall cladding projects. Engineered with a light weight build, productivity-enhancing features and operatorcentric ergonomics, the system enables roofing and metal facade contractors to complete installations with enhanced safety, speed and consistency. ErgoDek® is compatible with commercially available cordless screwdrivers and features an integrated feed strip that reduces operator fatigue while delivering uniform, high-quality fastening results. Available in three models tailored for leading power tool brands including DeWalt, Hilti and FEIN, the system fits a variety of metal deck profiles and panel assemblies up to 2×1.25 mm in total thickness. When paired with SFS's metal deck screw portfolio, it further elevates installation speed and on-site workmanship.

CFM - Issue 47 -Sep. 2026

Treace's SuperBite™ Compression Screw System Debuts in Clinical Foot Surgery

Medical device firm Treace Medical Concepts has announced the successful first clinical use of its nextgeneration SuperBite™ compression screw system. Featuring variable-pitch threads, a headless profile, and integrated self-drilling and countersinking capabilities, the screw enables rapid implantation and provides high compressive force. Its beveled head and smooth edges make it suitable for both minimally invasive and traditional open procedures. Available in diameters ranging from 2.5 mm to 7.0 mm, the system supports a wide range of orthopedic and fusion surgeries across the forefoot, midfoot and hindfoot. "The first cases went exceptionally smoothly. The surgical workflow and compression performance are impressive," said Dr. Anne Holly Johnson, surgeon at Hospital for Special Surgery in New York and member of Treace's Surgeon Advisory Board. "We will continue utilizing this system across more fusion and osteotomy procedures." John T. Trea ce, CEO of Trea ce, note d t hat SuperBite™ — alongside the upcoming SpeedXM™ midfoot fusion system — is expected to expand the company's addressable market by approximately $300 million in 2026 and strengthen Treace's position as a one-stop solution provider for foot and midfoot surgical technology. The full product line is on track for commercial launch in the third quarter of 2026.

Teks® Rolls Out Dedicated Standing Seam Roofing Screw

Ramset Launches Cobra+ IFS Rapid Insulation Fastening System in the U.S.

Construction fastening and tool specialist Ramset has officially introduced its Cobra+ IFS (Insulation Fastening System) to the U.S. market, extending its established Cobra+ nailing platform into an all-in-one tool solution for rapid rigid insulation installation. Designed for rigid and semi-rigid insulation boards, the system fastens insulation directly and securely into concrete, eliminating the need for adhesive curing time, pre-drilling and temporary bracing. This greatly streamlines construction workflows and improves labor efficiency and jobsite productivity. With a conversion kit — including a dedicated piston, barrel and buffer component — standard Cobra+ tools can be reconfigured for insulation fastening in under three minutes. Paired with specially designed spiral steel pins, the system secures common foam boards and mineral wool materials in a single shot. Its integrated thermal break cap and patented fastener head design enhance thermal performance while maintaining a clean aesthetic, making the system suitable for insulation retrofit applications in both residential and commercial buildings.

Baosteel Pioneers Nickel-Free High-Strength Weathering Steel Wire Rod for Bolts

Baoshan Iron & Steel Co., Ltd. (Baosteel) has filed a core patent for a nickel-free high-strength weathering steel wire rod for bolts, along with the corresponding bolt product and manufacturing method — an industry-first breakthrough that reduces reliance on nickel resources. The patented formulation eliminates nickel entirely and achieves advanced performance through precise tuning of carbon, silicon, manganese, chromium and copper content — with chromium controlled at 3.0%5.5% and copper at 0.3%-0.5% — supplemented by trace amounts of titanium and aluminum. The production process includes smelting and casting, controlled heating at 1050~1100°C, rolling and cooling steps, resulting in high-performance weatheringresistant bolts.

Metal fastener brand Teks® has launched its new Teks Standing Seam Roofing Screw, a purpose-engineered solution built to meet the performance and installation demands of modern standing seam metal roofing systems. While many contractors still rely on generic, non-specialized screws, the new standing seam fastener is engineered for precision, consistency and installation efficiency. It works with wood substrates and framing, and is compatible with both clipped and non-clipped standing seam systems. Its low-profile pancake head prevents panel dimpling and preserves a clean, finished appearance. The screw features a sharp point and coarse threads for faster starting and superior holding power in wood, plus a T25 Torx drive that reduces the risk of cam-out and dropped fasteners. "Standing seam roofing has evolved from a niche segment to a mainstream application," said Kim Cortes, Senior Product Manager at Teks. "Our design is focused on real-world jobsite conditions, not just adapting a generic fastener. This product helps contractors deliver precise, consistent, high-quality results on every project." The full line is now available nationwide across Home Depot, Amazon and multiple building mate r ial dis t r ib utor s , g i v ing contractors dedicated fastening options instead of relying solely on standard screws bundled with panel packages.

Essence Fastening Granted Two Self-Tapping Screw Patents for Anti-Loosening Technology

Essence Fastening Systems (Shanghai) Co., Ltd. has secured two utility model patents for self-tapping screw innovations that address loosening challenges in fastening applications. On July 28, the company was granted a patent for a high performance self-tapping screw . The design uses a one-way ratchet mechanism with interlocking protruding and recessed tabs that prevent reverse rotation of the threaded shank, significantly improving anti-loosening per formance when assemblies are subjected to impact loads. On August 7, Essence Fastening received a second patent for a self-tapping screw connec tion struc ture with antidisengagement effect. This design incorporates an annular washer with protrusions at the base of the screw head, increasing friction between the fastener and the mounting surface to resist loosening and disengagement during service. So far this year, Essence Fastening has obtained 5 new patent grants, representing a 400% year-on-year increase. CFM - Issue 47 - Sep. 2026

TECHNOLOGY Sherex Fastening Solutions Rolls Out Full Metric Rivet Nut Line in North America

Sh e re x Fa s te ning S olut ions , a di v ision of PennEngineering, launched its complete range of full metric blind rivet nuts across the North American market in late July 2026. Featuring round, half-hex, and full-hex bodies in both open- and closed-end options, the product line aligns with standard metric hole geometries. Driven by rising North American manufacturing activity in EVs, renewable energy, and datacom equipment, the standardized metric portfolio aims to streamline crossborder assembly standards and lower installation costs.

Fabory Introduces Black Stainless Steel Fastener Range with 230 New Products

Fabory announced on July 27, 2026, the expansion of its assortment with 230 additional black A4 stainless steel fasteners. The expansion aims to give customers greater choice and make it easier to find fasteners that seamlessly integrate into their designs. Black stainless steel fasteners are seeing growing demand in applications where aesthetics matter, such as construction, furniture and decoration, and Fabory's product line expansion addresses this market trend.

CFM - Issue 47 -Sep. 2026

UK's Accu Launches Hygienic Fastener Range for Food and Pharmaceutical Industries

UK precision engineering component distributor Accu launched a new range of hygienic bolts, washers and nuts, designed specifically for food processing, beverage production, bakery and pharmaceutical manufacturing environments to prevent microbial contamination risks. The product range is made of 304 stainless steel with highly polished, crevice-free surfaces. Integrated silicone gaskets beneath the flanges create airtight and watertight seals that withstand chemical agents used in daily sanitization and Clean-in-Place (CIP) cycles. With an operating temperature range of -50°C to +190°C, they meet the requirements of stringent hygienic environments.

Yahata Screw Launches YAHATA PRO Professional Fastening Series for Construction Market

Yahata Screw Co., Ltd. announced in August 2026 that it would officially launch the YAHATA PRO professional fastening product series at the 62nd Japan DIY Homecenter Show, expanding its layout in the professional construction sector. The series focuses on cross-construction scenarios of woodworking and steel structures, with core products including quick-drive screws and reverse-traction self-drilling screws. When matched with special bit s and drill bit s , t h e f a s te ne r s allow countersinking and pilot hole drilling to be merged into a single operation, theoretically cut t ing t he cons t r uc t ion timeline by about one third.

TECHNOLOGY Building on the content covered in Part I (see CFM Issue 46, pp. 70-73), this article will elaborate in detail on the remaining content.

Influence of Processing Quality on Fracture Behaviour of High‑Strength Bolts - How New National Standards Are Driving the Development of the Fastener Industry Technical Expert: Zhang Xianming

Metallographic Structure Examination

Specimens were cut from the shank of fractured bolts and from locations near the threaded fracture surface, then observed and analyzed under a DM3000 optical microscope. Non-metallic inclusions in the bolt steel were rated in accordance with the standard rating charts specified in GB/T 10561-2023 "Determination of Non‑Metallic Inclusion Content in Steel". After etching with a 4% nitric acid (HNO3) solution in alcohol, the metallographic structure of the fractured bolts was observed and analyzed via optical microscope and highresolution scanning electron microscope (HR-SEM). Tempered sorbite was rated using the fourth group of rating charts from GB/T 13320-2025 "Metallographic Rating Charts and Evaluation Method for Steel Die Forgings".

shank surface, while the ferrite content increased significantly at the core, where residual banded structure characteristics were clearly visible, with bright white undissolved ferrite distributed in a banded pattern. The presence of this bright white ferrite and residual banded structure characteristics in the bolt's metallographic structure [4-5] reflects incomplete austenitization during quenching heating [6]. (3) The metallographic structures at the surface and core of the bolt 2 shank are shown in Figure 6, both consisting of tempered sorbite and rated at grade 4.5. A small amount of ferrite was observed in the shank structure, with a notably higher content at the core, and faint banded structure characteristics remained visible on the bolt shank.

(1) Type A sulfide inclusions in the fractured bolt steel were distributed along the longitudinal direction of the bolt, rated as fine A1.5; Type D globular oxide inclusions were rated as fine D2 (Figure 4). This indicates average metallurgical quality of the bolt steel. (2)The metallographic structures at the surface and core of the bolt 1 shank are shown in Figure 5, both consisting of tempered sorbite and rated at grade 4.5. A small amount of punctate and blocky bright white ferrite was observed on the 76

CFM - Issue 47 -Sep. 2026

a) ×100 (Longitudinal)

b) ×100 (Transverse)

Figure 4 Non‑Metallic Inclusions in Fractured Bolt Steel (Polished State)

a) ×500 (Surface)

b) ×500 (Core)

Figure 5 Metallographic Structure at Surface and Core of Shank of Fractured Bolt 1

a) ×500 (Surface)

b) ×500 (Core)

Figure 6 Metallographic Structure at Surface and Core of Shank of Fractured Bolt 2 (Banded Structure Characteristics)

A – Fracture Initiation Zone

C – Shear Lip Zone

A – Fracture Initiation Zone

B – Fibrous Zone

C – Shear Lip Zone

B – Fibrous Zone

C – Shear Lip Zone

a) Fracture surface of bolt 1

secondary cracks or tearing voids (Figures 8–9). Zone B, the fibrous zone of the fracture surface, occupied approximately one‑third of the total fracture area. It was relatively flat near the central fracture, with torsional tearing striations visible macroscopically at the peripher y. Under SEM, this zone exhibited quasi‑cleavage and extensive plastic tearing (Figures 10–11), or successive plastic tearing features. Its microscopic characteristics consisted of abundant quasi‑cleavage plus tearing dimples (Figures 12–13) and a large number of tearing dimples (Figure 14). Zone C, located at the peripheral edge of the fracture surface, exhibited fine shear‑type dimples in its microscopic morphology (Figure 15). This edge region corresponds to the shear lip formed during final fracture. All bolt fractures originated from the center of the fracture surface. The fracture surfaces were either rough and uneven or presented flat zones characteristic of brittle fracture. Microscopically, the fractures were dominated by brittle cleavage and quasi‑cleavage fracture, accompanied by plastic tearing dimple features, numerous secondary cracks and tearing voids, with abnormal morphology of faint coarse grain traces visible locally. These abnormal fracture characteristics are highly similar to the microscopic fracture features of brittle fracture in hot‑rolled steel [7], indicating that although the bolt core has undergone quenching and tempering treatment, its microstructure has not been fully refined and improved, with residual hot‑rolled structural traces and obvious ferrite banded structure.

b) Fracture surface of bolt 2

Figure 7 Macroscopic Morphology of Bolt Fracture Surfaces

Microscopic Morphology Analysis of Fracture Surfaces

A typical fracture surface of the bolt 2 was selected for observation and analysis of its microscopic morphology using a JSM-7001F high‑resolution scanning electron microscope. The fracture morphology of the bolt is shown in Figure 7. Microscopic characteristics were observed and analyzed for the fracture initiation zone (Zone A), fibrous zone (Zone B) and shear lip zone (Zone C) of each fracture surface. Zone A, the central fracture initiation zone, had a rough and uneven macroscopic fracture surface with a relatively large area of approximately Φ8–10 mm. The microscopic fracture morphology of Zone A was dominated by flat cleavage facets, with localized plastic tearing dimple features and deep

a) ×500

b) ×1000

c) ×1500

Figure 8 Microscopic Morphology of Central Zone A-1 on Bolt Fracture Surface

a) ×500

b) ×1000

Figure 9 Microscopic Morphology of Central Zone A-2 on Bolt Fracture Surface

CFM - Issue 47 - Sep. 2026

TECHNOLOGY

b) ×200 (local magnification of left image)

a) ×50

b) ×1500

a) ×1500

Figure 13 Microscopic Morphology at Edge of Zone B-3 on Bolt Fracture Surface

c) ×500 (local magnification of upper right image)

d) ×1000 (local magnification of left image)

Figure 10 Microscopic Morphology of Central Zone A-3 on Bolt Fracture Surface

a) ×1000

b) ×1000

c) ×1500

Figure 14 Microscopic Morphology of Zone B-4 on Bolt Fracture Surface

a) ×1000

b) ×2000

c) ×1000

Figure 11 Microscopic Morphology of Zone B-1 on Bolt Fracture Surface a) ×50

b) ×2000

Figure 15 Microscopic Morphology of Peripheral Shear Lip Zone C on Bolt Fracture Surface

Analysis and Discussion Heat Treatment Quality

Figure 12 Microscopic Morphology of Zone B-2 on Bolt Fracture Surface

CFM - Issue 47 -Sep. 2026

The fractured high‑strength bolt steel is of average metallurgical quality, with no abnormal inclusion defects obser ved. The quenched and tempered metallographic structure of the bolts consists of tempered sorbite, but with poor structural uniformity and high ferrite content at the core. This is attributed to incomplete austenitization during heating for quenching: in addition to undissolved ferrite at the bolt core, traces of banded structure from the hot‑rolled raw material are visible in the microstructure. In pursuit of cost reduction and efficiency improvement, enterprises may

shorten the holding time of quenching heating to save energy and costs, resulting in incomplete austenitization and uneven quenched structure. Such uneven undissolved ferrite structure cannot be eliminated during subsequent tempering, posing a risk of premature failure. The metallographic structure af ter quenching and tempering is evaluated in accordance with GB/T 13320-2025 "Metallographic Rating Charts and Evaluation Method for Steel Die Forgings". For property class 10.9 high‑strength bolts, the tempered sorbite rating is generally required to be no higher than grade 4. Although the tensile strength and hardness of this batch of bolts meet the performance requirements for property class 10.9 bolts, the structural uniformity is poor (tempered sorbite + bainite + strip and block ferrite + a small amount of pearlite), resulting in a grade 4.5 rating, which fails to meet the specification. In zones with high ferrite content in the bolts, the fracture surface exhibits quasi‑cleavage characteristics. Fracture analysis shows a good correspondence between fracture morphology and microstructure analysis at the bolt core due to high ferrite content: the tempered sorbite zone presents dimple morphology, while localized ferrite zones present quasi‑cleavage characteristics [8]. The high ferrite content at the core of fractured bolts and residual traces of hot‑rolled banded structure in the microstructure both indicate insufficient holding time during quenching heating, which severely impairs the strength‑toughness balance and service safety of the bolts.

Thread Machining

Crack defects were observed on the threads near the fracture in all thread specimens, mainly caused by improper thread rolling process, which leads to folding af ter the convergence of metal plastic flow during rolling forming. Microcracks of varying depths were also present at all thread roots, propagating obliquely with relatively wide openings and rounded tips, indicating that cracks had formed at multiple thread roots of the bolts. After etching, the metallographic structure at the thread crests and roots was fine with obvious flow traces (Figure 16). As specified in GB/T 5770.3-2000 "Surface Defects of Fasteners – Particular Requirements for Bolts, Screws and Studs", for load‑bearing bolt threads, folding with a depth no greater than 1/4 of the thread profile height above the pitch diameter is permissible, while folding at the thread root is a non‑permissible defect. This batch of bolts had extensive folding defects at both thread roots and crests, which do not comply with standard requirements. Thread folding is also one of the primary causes identified in the bolt fracture analysis.

a) ×100 (Crest of fractured bolt)

b) ×100 (Crest of fractured bolt)

c) ×100 (Root of fractured bolt)

d) ×100 (Root of fractured bolt)

Figure 16 Folding Cracks at Threaded Section of Fractured Bolts (Etched State)

Crack Initiation and Stress Source

After necking occurs under tensile stress, the necked region is subjected to triaxial tensile stress, and the maximum tensile stress shifts toward the core. The ferrite at the bolt core acts as a weak link, undergoing deformation and tearing first via quasi‑cleavage fracture. In zones with high ferrite content at the bolt core, numerous secondary cracks appear on the fracture surface, and multiple brittle quasi‑cleavage fracture micro‑zones are visible at high magnification. The quasi‑cleavage fracture mode of ferrite impairs the strength‑toughness balance of high‑strength bolts and serves as a crack initiation source [9]. For regions beyond the 10 mm central zone, the fracture surfaces are essentially composed of dimples, with shear dimples in the shear lip zone. The tempered sorbite matrix in the metallographic structure of high‑strength bolts ensures that the fracture surface is predominantly dimple‑type overall. The presence of numerous secondary cracks and abundant brittle quasi‑cleavage micro‑zones at the bolt core is a rare abnormal morphology in high‑strength bolt fractures.

External Factors of Fracture

Given that the hardness and tensile strength of the fractured bolts meet the technical requirements for property class 10.9 bolts, fracture during installation at the specified torque of 2810 N·m is abnormal. Based on the presence

CFM - Issue 47 - Sep. 2026

TECHNOLOGY of necking near the fracture surface, the fracture can be determined as ductile fracture caused by tensile overload. The possibility of overload due to over‑tightening cannot be ruled out, which also constitutes an external factor leading to bolt fracture.

Conclusions

(1) The abundant quasi‑cleavage micro‑zones at the central fracture surface of the bolts constitute the fracture initiation zone, which is associated with high ferrite content and hot‑rolled banded structure in the core microstructure of quenched and tempered bolts. The primary cause of bolt fracture is incomplete through-hardening at the core. The poor uniformity of the bolt microstructure indicates that during quenching heating in the mesh belt furnace, excessive furnace loading and fast mesh belt speed resulted in insufficient heating, leading to incomplete and uneven austenitization at the core and incomplete through‑hardening of the bolts. To ensure sufficient austenitization during quenching, to obtain an

approximately 90% martensitic structure that is uniform and free from microstructural defects, great importance shall be attached to metallographic examination of the as‑quenched structure to verify the rationality and effectiveness of the heat treatment process. (2) Medium‑carbon CrMo steel and CrMoV steel are generally selected for property class 10.9 products. The quality of high‑strength fasteners depends on the heat treatment method and processing technology to ensure resistance to delayed fracture and the required product performance, with yield ratio and microstructure as mandatory inspection items. When the hardness and tensile strength of high‑strength bolts meet property class 10.9 requirements but microstructure inhomogeneity is neglected, there is a risk of bolt overload fracture due to over‑tightening during installation. Improper thread rolling process and extensive folding defects at both thread roots and crests are among the secondary causes of fracture for this batch of bolts. First‑article inspection and in‑process inspection during thread machining must be strengthened.

References [1] Dong H, Lian X T, Hu C D, et al. Progress in Theories and Technologies for High-Performance Steels [J]. Acta Metallurgica Sinica, 2020, 56(4): 558-582. [2] Gu Q L, Zhang X M. Application of Fastener Wire Rods and Bars in High-Strength Bolts for Wind Power Applications [J]. Metal Processing, 2010, 15(5): 37-39. [3] Guo Y G, Jiang C, Lu H C, et al. Key Points for Manufacturing Critical Fasteners for Automotive Engines [J]. Shanghai Metals, 2020, 42(6): 6‑14. [4] Liu Zongchang, Wang Yufeng, Yang Hui, et al. Banded Structure of Forged and Rolled 42CrMo Steel [J]. Journal of Baotou University of Iron and Steel Technology, 2003, 22(4): 323-325. [5] Xiong Jiahao, Chen Jiabao, Wang Yizhong, et al. Influence of Banded Structure on Fasteners [J]. China Metal Bulletin, 2024, 32(12): 158-161. [6] Xia Lifang. Metal Heat Treatment Technology [M]. Harbin: Harbin Institute of Technology Press, 2008. [7] Li Jionghui, Lin Decheng. Metallographic Atlas of Metallic Materials (Volume 1) [M]. Beijing: China Machine Press, 2007. [8] Writing Group of "Metal Fracture Analysis", Shanghai Jiao Tong University. Metal Fracture Analysis [M]. Beijing: National Defense Industry Press, 1979. [9] Zhong Qunpeng, Zhao Zihua. Fractography [M]. Beijing: Higher Education Press, 2006.

FINANCIAL REPORT

Financial Reports of Chinese Listed Companies for the First Half of 2026 (Unit: USD million)

Ranked by market value as of August 28, 2026, and converted based on the exchange rate of that day.

CFM - Issue 47 -Sep. 2026

FINANCIAL REPORT Financial Report of International Fastener Listed Companies Company

Local Currency

Revenue H1 2026

Revenue H1 2025

YoY

Bossard

CHF million

575.70

546.70

5.30%

Bufab

SEK million

4,488.00

4,224.00

6.25%

Bulten

SEK million

1,558.00

1,795.00

-13.20%

Fastenal

USD million

4,588.60

4,039.70

13.59%

Grainger

USD million

9,763.00

8,860.00

10.19%

Howmet Aerospace

USD million

4,860.00

3,995.00

21.65%

ITW

USD million

8,317.00

7,892.00

5.39%

LISI

EUR million

942.90

891.70

5.70%

MonotaRO

JPY million

193,261.00

160,232.00

20.61%

MSC

USD million

1,883.46

1,820.20

3.47%

Nucor

USD million

19,893.00

16,286.00

22.15%

PCC

USD million

6,000.00

5,386.00

11.40%

SFS

CHF million

1,554.70

1,533.50

1.38%

Stanley Black & Decker

USD million

7,807.10

7,689.80

1.53%

Hilti (Jan.–Apr. 2026)

CHF million

2,068.00

2,099.00

-1.48%

Misumi (Apr.–Jun. 2026)

JPY million

131,440.00

99,368.00

32.30%

Nifco (Apr.–Jun. 2026)

JPY million

90,900.00

85,500.00

6.30%

Notes: Precision Castparts Corp. (PCC) is a wholly owned subsidiary of Berkshire Hathaway Inc. and therefore does not publicly disclose standalone financial statements; the relevant figures are as disclosed in Berkshire Hathaway’s Industrial Products segment discussion.

CFM - Issue 47 - Sep. 2026

INSIGHTS China's Fastener Export Data for Jan.–Jul. 2026:

Emerging Markets Soar as Traditional Destinations Diverge

ccording to the latest customs data released for the January–July 2026 period, China's fastener export sector has demonstrated robust resilience and a clear trajectory of high-quality development. Total export value reached USD 7.32 billion, marking a solid 5.4% year-on-year (YoY) increase (USD 6.95 billion in Jan-Jul 2025). The 7-month period witnessed a positive "volume-price joint growth" pattern. Export volume expanded by 2.5% YoY to 3.69 million tonnes, while the average export price rose by 2.8% YoY to USD 1.98/kg. Notably, the growth rate of export value (5.4%) is nearly double that of the volume (2.5%). The faster growth in export value than in volume suggests an improvement in the average export value per unit.

China's Fastener Export Data for January-July 2026 Period

Total Value (USD)

Quantity (kg)

Average Price (USD/kg)

Jan.‑Jul. 2026

7,320,261,000.00

3,694,929,000.00

1.98

Jan.‑Jul. 2025

6,947,518,000.00

3,604,037,000.00

1.93

YoY

5.4%

2.5%

2.8%

Among these, steel fasteners classified under HS code 7318 accounted for the largest share, with an export value reaching approximately USD 6.18 billion. An in-depth analysis of China's fastener export destinations for January–July 2026 reveals a shifting landscape where emerging markets are acting as the primary growth engine, while demand in certain traditional markets is stagnating. The US retained it s position as the larges t single destination with exports of USD 786.0 million, up a modest 3.2% YoY. However, the most dynamic growth came from Southeast Asia. Vietnam surged to second place with USD 446.6 million (+18.1% YoY), followed by Thailand which posted the strongest growth among the top five at 23.0% (USD 244.8 million). India (+20.9%) and Malaysia (+19.6%) also showed significant momentum. Conversely, exports to Russia (-6.9%), Germany (-5.9%) and the UAE (-30.0%) declined. The most notable outlier is Kyrgyzstan, which, despite a lower export base (USD 105.9 million), demonstrated explosive growth of 43.1%, highlighting the deepening penetration into Central Asian and "Belt and Road" markets. This divergence underscores a strategic

CFM - Issue 47 -Sep. 2026

rebalancing, where low-competition, high-growth emerging corridors are becoming pivotal for China's fastener exports amidst a complex global trade environment. Taken as a whole, the January-July 2026 export data paints a picture of a Chinese fastener industry successfully navigating complex global headwinds through structural optimization and strategic market rebalancing. While total export value grew by a solid 5.4% to USD 7.32 billion, the parallel growth in both volume (2.5%) and average prices (2.8%) underscores the sector's steadfast transition from quantity-driven expansion to value-driven quality enhancement. Simultaneously, the significant double-digit surges in emerging markets such as Vietnam, Thailand, India, and Kyrgyzstan, juxtaposed against the contractions in Russia, Germany, and the UAE, highlight a pivotal shift in the global demand map. With traditional Western markets offering increasingly saturated or volatile demand, the deepening penetration into Southeast Asian and Belt and Road corridors is becoming the primary growth engine for Chinese fastener exporters.

Note: The data in the table are for steel fasteners classified under HS code 7318

Details of Countries with Export Values Over USD 100 Million

Number

Country

Jan.‑Jul. 2026

Jan.‑Jul. 2025

Percentage

The US

785,951,901

761,529,197

3.2%

7 8

10 11 12 13 14 15 16

Vietnam Russia

Germany Thailand Japan India

South Korea Australia Malaysia Mexico Britain Brazil Italy

The UAE

Saudi Arabia Canada

Indonesia

Kyrgyzstan Poland

446,591,292

300,463,282

279,106,065

244,847,541

201,872,902 194,719,531

179,082,778 178,821,350 174,319,464 167,820,439 162,248,127 149,273,117 146,480,042 130,966,075

130,666,263 121909761

106,116,077

105,946,384 102,683,120

378,153,261

18.1%

322,849,773

-6.9%

296,653,052

-5.9%

199,068,660

23.0%

201,391,286

0.2%

161,103,986

20.9%

186,939,912

-4.2%

144,115,202

24.1%

145,793,088

19.6%

162,543,910

3.2%

165,588,662

-2.0%

142,128,543

5.0%

149,741,528 187,190,949

130,513,466 110,538,019

-2.2% -30 .0% 0.1% 10.3%

94,696,327

12.1%

74,059,505 97,817,803

43.1% 5.0%

CFM - Issue 47 - Sep. 2026

INSIGHTS

Analysis of U.S. Fastener Import Sources in the First Half of 2026

ntroduction

According to the latest monthly data, the total volume of U.S. fastener imports in the first half of 2026 registered a 9.3% year-on-year drop, with total import value falling by 11.7%, signaling a pronounced contraction trend. By integrating monthly aggregate data for H1 2026 with an analysis of rankings by major source regions, CFM unveils the evolving dynamics among the top 10 source regions.

Overall Monthly and Total Trends

Based on data extracted and collated from the United Nations Commodity Trade Statistics Database (UN Comtrade), U.S. fastener imports in H1 2026 totaled 783.1 million kg, down from 863.6 million kg in H1 2025, a 9.3% year-over-year drop. In value terms, the total shrank from USD 3.406 billion to USD 3.006 billion, an 11.7% decline—indicating that average unit values also fell slightly.

Month-by-month comparisons paint a consistent picture of contraction:

The most striking feature is June 2026: volume edged up by 0.7% year-over-year, while value was nearly flat (-1.1%). This suggests a possible stabilization at the end of the half-year, though it remains too early to call a turning point. The steepest year-over-year declines came early in the period, with January and February value down 18.1% and 18.6% respectively, before the pace eased through the spring. This overall contraction sets the stage for the regional shifts detailed below—where we see that not all sources suffered equally.

Value Rankings

When ranked by trade value, "Other Asia, nes" (a category that primarily includes Taiwan, China in UN Comtrade

U.S. Fastener Import Data (Jan-June 2026)

Month

2026 Quantity (kg)

2025 Quantity (kg)

YoY

2026 Value (USD)

2025 Value (USD)

YoY

2026 Unit price (USD/kg)

2025 Unit price (USD/kg)

YoY

Jan.

143,012,540

162,665,111

-12.1%

511,118,001

623,821,384

-18.1%

3.6

3.8

-6.8%

Feb.

122,294,818

136,030,134

-10.1%

451,003,297

554,273,411

-18.6%

3.7

4.1

-9.5%

Mar.

131,060,179

152,957,848

-14.3%

524,377,534

606,615,861

-13.6%

4.0

0.9%

Apr.

129,668,134

138,617,250

-6.5%

510,987,097

553,149,990

-7.6%

3.9

4.0

-1.2%

May

127,434,139

144,622,353

-11.9%

504,257,547

557,616,356

-9.6%

4.0

3.9

2.6%

Jun.

129,602,087

128,731,959

0.7%

504,355,577

510,078,984

-1.1%

3.9

4.0

-1.8%

Total

783,071,897

863,624,655

-9.3%

3,006,099,053

3,405,555,986

-11.7%

3.8

3.9

-2.6%

CFM - Issue 47 -Sep. 2026

statistics) maintained its position as the top source region for U.S. fastener imports in H1 2026, with a total value of USD 938.3 million. However, this figure represents a 15.0% year-over-year decline from USD 1.10 billion in H1 2025. China, the second-largest source by value, saw an even sharper contraction. Imports from China fell to USD 490.4 million in H1 2026, down 20.8% from USD 619.2 million in the prior-year period. This double-digit decline aligns with ongoing tariff escalations: U.S. Section 232 duties on steel and steel derivatives, combined with successive Section 301 tariff actions on Chinese goods, have continued to raise the effective cost of Chinese fasteners, potentially encouraging importers to diversify their sourcing. Japan, ranking third, recorded USD 285.2 million in H1 2026, a 9.3% decrease from USD 314.4 million in H1 2025. The Republic of Korea also recorded a double-digit decline of 12.3%, falling to USD 136.6 million from USD 155.8 million. Canada experienced a notable 14.9% decline, sliding to USD 155.3 million.

Top 10 Source Regions for U.S. Imports in H1 2026 (Ranked by Value) Region

H1 2026 Trade Value (USD)

H1 2025 Trade Value (USD)

YoY

Other Asia, nes

938,317,577

1,104,191,195

-15.0%

China

490,378,208

619,188,529

-20.8%

Japan

285,167,646

314,350,863

-9.3%

Germany

172,621,638

166,330,453

3.8%

Canada

155,297,880

182,556,797

-14.9%

Italy

154,565,322

149,109,262

3.7%

India

151,245,471

154,871,542

-2.3%

Rep. of Korea

136,607,118

155,836,848

-12.3%

Mexico

76,516,867

103,934,024

-26.4%

France

64,898,013

60,173,703

7.9%

Top 10 Source Regions for U.S. Imports in H1 2026 (Ranked by Value)

Not all regions followed the downward trend. Germany bucked the pattern, posting a 3.8% increase to USD 172.6 million from USD 166.3 million, moving up to fourth place. Italy rose by 3.7% to USD 154.6 million, while France recorded a 7.9% gain to USD 64.9 million—the strongest growth among valueranked sources. India, however, saw a marginal 2.3% dip to USD 151.2 million. Mexico experienced the most severe contrac tion, plummeting 26.4% to USD 76.5 million from USD 103.9 million— the largest percentage drop in the value ranking.

Volume Rankings

When ranked by quantity (kilograms), the story shifts considerably. "Other Asia, nes" again topped the list with 261.7 million kg in H1 2026, down 10.4% from 292.2 million kg. China followed with 227.6 million kg, a 16.5% decline from 272.5 million kg - a drop that is slightly less severe in volume terms than its value decline. India secured the third spot by volume with 54.7 million kg, a modest 1.6% increase from 53.8 million kg. Japan's

CFM - Issue 47 - Sep. 2026

INSIGHTS volume fell 17.8% to 51.5 million kg, while the Republic of Korea dropped 4.4% to 27.2 million kg. The most notable volume gains came from European suppliers. Germany's volume surged 42.0% to 24.2 million kg from 17.0 million kg—the largest percentage increase among all ranked sources. Italy followed with a 31.8% jump to 20.8 million kg. Vietnam and Thailand also posted solid gains of 14.9% and 24.3%, respectively, underscoring Southeast Asia's growing role as an alternative sourcing hub. Canada, by contrast, saw its volume decline 16.0% to 26.0 million kg, mirroring its value drop.

Top 10 Source Regions for U.S. Imports in H1 2026 (Ranked by Quantity) Region

H1 2026 Quantity (kg)

H1 2025 Quantity (kg)

YoY

Other Asia, nes

261,736,830

292,213,744

-10.4%

China

227,580,126

272,512,046

-16.5%

India

54,698,416

53,833,461

1.6%

Japan

51,540,598

62,713,804

-17.8%

Rep. of Korea

27,246,788

28,492,077

-4.4%

Canada

26,022,860

30,981,756

-16.0%

Germany

24,166,072

17,018,106

42.0%

Italy

20,759,303

15,753,801

31.8%

Vietnam

20,440,924

17,789,869

14.9%

Thailand

18,935,092

15,234,947

24.3%

Top 10 Source Regions for U.S. Imports in H1 2026 (Ranked by Quantity)

Conclusion

The first half of 2026 marks a pivotal moment for U.S. fastener imports. Overall demand has shrunk by nearly 10% in volume and over 11% in value, with monthly data showing a clear downward trend that only began to flatten in June. Yet within this contracting market, a significant reallocation is visible: as some sources decline, others rise. China and "Other Asia" continue to dominate in absolute terms, but their share is eroding under tariff pressures and supply chain diversification. Europe is gaining ground, both in value and volume, while Southeast Asian suppliers like Vietnam and Thailand are emerging as quiet winners. For procurement professionals and industry stakeholders, the message is unambiguous: the sourcing landscape is in flux.

CFM - Issue 47 -Sep. 2026

INSIGHTS

Source: UN Comtrade Database (HS Code: 7318)

EU Fastener Import and Export Data (Jan-May 2026) EU Fastener Import Data (Jan-May 2026)

EU Fastener Export Data (Jan-May 2026)

Month

Quantity (kg)

Value (USD)

Month

Quantity (kg)

Value (USD)

Jan-26

133,554,437

574,893,485

Jan-26

41,528,525

458,555,686

Feb-26

132,842,025

593,404,586

Feb-26

43,878,229

559,145,309

Mar-26

150,332,888

645,152,030

Mar-26

48,084,129

610,883,636

Apr-26

147,494,573

631,086,701

Apr-26

45,968,780

593,555,028

May-26

128,670,924

575,426,294

May-26

42,746,118

541,220,504

Total

692,894,846

3,019,963,096

Total

222,205,782

2,763,360,163

Germany Fastener Import and Export Data (Jan-June 2026) Germany Fastener Import Data (Jan-June 2026)

Germany Fastener Export Data (Jan-June 2026)

Month

Quantity (kg)

Value (USD)

Month

Quantity (kg)

Value (USD)

Jan-26

76,335,863

415,830,220

Jan-26

68,743,034

674,070,783

Feb-26

77,064,809

420,913,762

Feb-26

69,410,629

674,818,677

Mar-26

81,923,445

455,047,169

Mar-26

74,292,701

742,291,758

Apr-26

78,097,646

433,982,109

Apr-26

69,111,673

691,871,481

May-26

69,509,666

385,131,224

May-26

61,823,996

627,303,280

Jun-26

75,287,948

426,174,988

Jun-26

68,626,004

676,970,034

Total

458,219,376

2,537,079,472

Total

412,008,037

4,087,326,013

U.S. Fastener Import and Export Data (Jan-June 2026)

U.S. Fastener Import Data (Jan-June 2026)

U.S. Fastener Export Data (Jan-June 2026)

Month

Quantity (kg)

Value (USD)

Month

Quantity (kg)

Value (USD)

Jan-26

143,012,540

511,118,001

Jan-26

446,894,258

Feb-26

122,294,818

451,003,297

Feb-26

475,961,796

Mar-26

131,060,179

524,377,534

Mar-26

525,292,734

Apr-26

129,668,134

510,987,097

Apr-26

510,085,852

May-26

127,434,139

504,257,547

May-26

531,116,305

Jun-26

129,602,087

504,355,577

Jun-26

523,392,527

Total

783,071,897

3,006,099,053

Total

3,012,743,472

CFM - Issue 47 -Sep. 2026

Note: "-" indicates data not shown or disclosed

Japan Fastener Import and Export Data (Jan-June 2026) Japan Fastener Import Data (Jan-June 2026)

Japan Fastener Export Data (Jan-June 2026)

Month

Quantity (kg)

Value (USD)

Month

Quantity (kg)

Value (USD)

Jan-26

44,172,059

167,857,386

Jan-26

19,357,898

156,997,588

Feb-26

35,253,555

147,157,954

Feb-26

22,147,942

177,237,375

Mar-26

31,130,937

149,279,629

Mar-26

25,451,875

202,228,582

Apr-26

38,458,617

173,716,456

Apr-26

25,513,601

203,844,012

May-26

39,070,850

167,032,272

May-26

21,615,179

176,225,091

Jun-26

39,515,750

172,253,744

Jun-26

24,074,737

191,851,340

Total

227,601,768

977,297,441

Total

138,161,232

1,108,383,988

Malaysia Fastener Import and Export Data (Jan-June 2026) Malaysia Fastener Import Data (Jan-June 2026)

Malaysia Fastener Export Data (Jan-June 2026)

Month

Quantity (kg)

Value (USD)

Month

Quantity (kg)

Value (USD)

Jan-26

22,145,898

66,889,082

Jan-26

11,380,705

37,752,557

Feb-26

18,149,243

58,709,013

Feb-26

8,718,043

30,392,854

Mar-26

20,992,517

59,165,050

Mar-26

11,505,785

34,675,805

Apr-26

28,588,016

72,494,536

Apr-26

12,732,420

34,757,907

May-26

27,269,182

68,199,023

May-26

12,877,540

37,416,551

Jun-26

73,648,533

Jun-26

11,130,886

40,925,504

Total

117,144,856

399,105,237

Total

68,345,379

215,921,178

Note: "-" indicates data not shown or disclosed

Thailand Fastener Import and Export Data (Jan-May 2026) Thailand Fastener Import Data (Jan-May 2026)

Thailand Fastener Export Data (Jan-May 2026)

Month

Quantity (kg)

Value (USD)

Month

Quantity (kg)

Value (USD)

Jan-26

25,395,763

124,549,587

Jan-26

13,607,258

50,335,325

Feb-26

21,294,557

104,620,670

Feb-26

14,318,695

53,975,855

Mar-26

18,512,421

109,753,951

Mar-26

13,490,703

52,676,070

Apr-26

23,034,070

109,677,532

Apr-26

13,258,214

51,623,918

May-26

24,373,403

113,426,828

May-26

12,914,314

50,956,958

Total

112,610,213

562,028,569

Total

67,589,184

259,568,126

CFM - Issue 47 - Sep. 2026

INSIGHTS

Haiyan: China's Premier Fastener Hub, From "Industrial Rice" to High-End Precision Manufacturing

ocated on the northern shore of Hangzhou

Bay in Zhejiang Province and in the core

hinterland of the Yangtze River Delta, Haiyan

County is a major manufacturing hub and one of China's three largest fastener production bases. Its fastener industry dates back to the early 1970s.

Today, Haiyan not only provides a reliable supply base for global buyers, but has also become a

vivid example of China's fastener sector moving up

from being the "industrial rice" of manufacturing to high-end production.

A Full-Fledged Industrial Ecosystem: The Cluster Power of 401 Enterprises

According to data from the Zhejiang Fasteners Industry Association, by the end of 2025, Haiyan County was home to 401 companies across the fastener supply chain. Of these, 171 were above-scale high-end fastener manufacturers, accounting for 20.68% of all above-scale industrial enterprises in the county. Thirty-nine companies had annual output value exceeding RMB 100 million, representing 16.53% of all county enterprises above that threshold. The total industrial output 92

CFM - Issue 47 -Sep. 2026

v a lu e o f hig h end fasteners reached RMB 15.625 billion, accounting for 10% of the county's total above-scale industrial output value. In terms of enterprise strength and innovation, Haiyan has two listed fastener companies, seven national-level "Little Giant" enterprises, three provincial "hidden champion" enterprises, and 47 provincial-level "Specialized, Refined, Distinctive and Innovative (SRDI)" SMEs. The county is also home to five provincial enterprise research institutes and 16 enterprise technology R&D centers at or above the provincial level, providing solid support for technical breakthroughs and product upgrades.

From Niche Player to Industry Standout: An Entrepreneur's Differentiated Growth Path

In Haiyan's fastener industry, individual stories often best illustrate the vitality of the region. CFM previously interviewed Chen Zhen, chairman of Zhejiang Hystron Auto Parts Co.,

Ltd. Originally from Hubei Province, Chen came to Haiyan in 2004 at the invitation of a local fastener company. Drawing on his technical exper tise, he worked as a technician. Watching the busy production site, he began to dream of building his own modern factory. Today, Zhejiang Hystron Auto Parts produces automotive parts, non-standard fasteners, specialshaped parts and other specialty products that have reached overseas markets. Around 90% of its products are exported to Europe, North America and other regions. The company has been recognized as a "Zhejiang Provincial Specialized and Sophisticated Fastener Product Enterprise' and serves as an Executive Council Member of the Zhejiang Fasteners Industry Association.

Craftsmanship Meets Innovation: Unlocking the Full Potential of a Single Screw

I f C h e n Zh e n's s to r y r e f le c t s t h e b o ld , enterprising spirit of Haiyan entrepreneur s, Zhejiang Excellent Industries Co., Ltd. demonstrates another dimension: small products can deliver big achievements. The company used 163,852 screws to create a 7m × 7m artwork titled "Spring Scenery of Wuling", turning fasteners into art. Its output value reached RMB 230 million in 2025. The company was named a national-level "Little Giant"enterprise, and as early as 2016 it took the lead in cross-border e-commerce. Its own brands, including "TK" and "EXCELLENT," sell well in Europe and America. B e yond the companie s ab ove, Haiy an's fastener industry also includes a number of other outstanding players in the high-end and precision segment. Würth Group, a global benchmark in fasteners, has been operating in Haiyan since 2015. It has built a 47,000-square-meter smart logistics hub equipped with German automated warehousing systems, and its supply chain center sales approached RMB 1 billion in 2025. In the capital market, Qifeng Precision Industry Sci‑Tech Corp. listed on the Beijing Stock Exchange in 2022, becoming the first fastener company listed on the exchange. Its fasteners are deployed in critical components including brake discs and gearboxes of China's Fuxing bullet trains. Zhejiang Ronnie Precision Machine Co., Ltd. also went public in the same year. Also a national-level "Little Giant"enterprise, Ronnie's products cover the 3C electronics and automotive sectors. In addition, Yuxing Fasteners (Jiaxing) Co., Ltd. is a leading nut

manufacturer in China, focusing on high-strength nuts for wind power, automotive and railway applications. It has ranked first in domestic market share for consecutive years and has also been recognized as a national-level "Little Giant" enterprise.

From "Made in Haiyan" to "Smart Manufacturing in Haiyan"

For global buyers, Haiyan is a region that deserves close attention. In 2025, China's fastener exports totaled USD 10.036 billion and 4.9997 million tonnes. Haiyan County accounted for 8.37% of the national export value and 14.8% of the national export volume. The top three export markets—the European Union, the United States and Russia— accounted for 23.94%, 22.65% and 7.44% of the county's total fastener exports respectively, together representing 54.03%. By the end of 2025, 17 fastener enterprises in the county had annual exports exceeding USD 10 million, accounting for 17.17% of all county enterprises with exports above USD 10 million.

Haiyan Fastener Export Enterprise Showcase (in no particular order) Zhejiang Morgan Brothers Technology Co., Ltd. Stud Bolts, Threaded Rods / Bars, Other Screws, etc. Zhejiang Junyue Standard Part Co., Ltd.

Stud Bolts, Threaded Rods / Bars, etc.

Zhejiang Lianxiang Hardware Science and Technology Co., Ltd.‌

Hex Head Bolts, Stud Bolts, Hex Nuts, Flat Washers, Spring Washers, etc.

Zhejiang Hisener Fasten Tech Co., Ltd.

High Strength Bolts & Screws, etc.

Yuxing Fasteners (Jiaxing) Co., Ltd.

Nuts, etc.

Qifeng Precision Industry Science And Technic Corp.

Hex Head Bolts, Hex Nuts, Flat Washers, Spring Washers, etc.

Zhejiang New Shengda Fastener Co., Ltd.

Stainless Steel / Carbon Steel Fiberboard Screws, Drywall Screws, Self-tapping Screws, etc.

Zhejiang Laibao Precision Technology Co., Ltd.

Hex Bolts, Carriage Bolts, T-head Bolts, etc.

Zhongda United Holding Group Co., Ltd.

Bolts, Nuts, Threaded Rods, etc.

Zhejiang Excellent Industries Co., Ltd.

Screws, Anchors & DIY Hardware Kits, etc.

Zhejiang Fangquan Automotive Fasteners Co., Ltd.

Rivet Nuts, etc.

Zhejiang Ansheng Automobile Parts Co., Ltd.

UN Thread Nylon Insert Lock Nuts, BS Thread Nylon Insert Lock Nuts, UN Thread Hex Flange Nuts, etc.

Zhejiang Hystron Auto Parts Co., Ltd.

DIN 928 Square Weld Nuts, DIN 929 Hex Weld Nuts, GB 13680 Type B, etc.

Jiaxing Hongcheng Fastener Co., Ltd.

Self-drilling Screws, Drywall Screws, Self-tapping Screws, etc.

Haiyan Jieng Beeing Metal Products Co., Ltd.

High Strength Bolts (Thread Rolled After Heat Treatment), etc.

Jiaxing Xingxin Trade Co., Ltd.

Hex Bolts, Hex Nuts, Lock Nuts, etc.

Haiyan Guangda Hardware Co., Ltd.

Hex Bolts, Flange Bolts, Non-standard Bolts, etc.

Youwei Auto Parts (Jiaxing) Co., Ltd.

High-end Fasteners, Stamping Parts & Injection Molding Parts for Automotive, Machinery & Home Appliances, etc.

The companies highlighted above, together with many member companies of the Zhejiang Fasteners Industr y Association, have enriched Haiyan's industrial landscape as it moves from "industrial rice" to high-end precision manufacturing, and provide global buyers with a broader range of reliable sourcing and cooperation options . For more information about the Haiyan fastener market and companies, please contact the CFM editorial team at buyer@chinafastener.com. CFM - Issue 47 - Sep. 2026

INSIGHTS New Energy and High‑End Applications:

How Fasteners Are Moving Up the Value Chain

s wind turbines, battery packs and high-voltage systems grow in scale and complexity, the value proposition of fasteners is shifting. Buyers are no longer simply sourcing a bolt that meets dimensional and strength requirements — they are investing in a joint solution that delivers greater reliability, verifiability and maintainability.

Why Fastener Value Is Changing

In conventional procurement, fasteners are widely regarded as commodit y component s: buyer s spe cif y dimensions, thread form, material and property class, then select suppliers based on price and lead time. Yet in wind energy, electric mobility and other high-end equipment sectors, fasteners occupy a critical intersection of safety, per for mance and life c ycle maintenance. Though the component itself is small, the costs of joint failure — downtime, repair work and safety risks — can be substantial. This issue has come into sharper focus as these industries scale rapidly. According to the International Energy Agency 94

CFM - Issue 47 -Sep. 2026

(IEA), global electric vehicle sales surpassed 20 million vehicles in 2025, accounting for roughly one-quarter of all new vehicle sales. The Global Wind Energy Council (GWEC) reported 165 GW of new wind power capacity installed in 2025. As a growing fleet of mission-critical assets enters long-term service, an increasing number of bolted joints must perform reliably under vibration, thermal cycling, humidity, salt spray and cyclic loading. High strength alone does not provide a complete picture. ISO 898-1 specifies the mechanical properties of carbon and alloy steel fasteners, but it does not address fatigue performance, corrosion resistance or the torque-clamp force relationship. A property class is therefore merely a baseline. True value resides in the performance of the entire joint system: appropriate material selection, consistent preload, controlled coating friction, repeatable assembly processes, comprehensive test and batch traceability records, and inservice inspectability.

Wind Energy Fasteners

A wind turbine is by no means a static structure. Wind speeds fluctuate constantly, the rotor rotates continuously, and the tower and drivetrain are subjected to repeated loading over many years of operation. Bolted joints in tower flanges, support structures and interfaces such as the hub-to-mainshaft connection must therefore withstand not only peak loads, but also fatigue damage accumulated over long-term cyclic loading. One of the most critical concepts in bolted joint design is preload — the initial clamping force applied to a bolt before the equipment enters service. When preload is properly set, mating surfaces are less prone to separation or slip, and translated into additional dynamic stress in the bolt.. If preload drops substantially, micro-movements at the joint become more likely, amplifying bolt stress fluctuations and increasing fatigue risk. Studies on wind turbine tower flanges have confirmed that significant preload loss accelerates bolt fatigue damage. The value of a wind energy fastener therefore extends far beyond large diameter and high tensile streng th. It encompasses controlled friction characteristics, specified lubrication and coating systems, validated tightening procedures, flange contact quality and dimensional control, as well as traceable installation and inspection records. Depending on joint configuration and loading mode, torque tightening, hydraulic tensioning or angle-controlled tightening may be required. A single tool set and parameter set cannot be assumed suitable for all joint locations. O f f shore wind applic at ions int ro duce addit ional challenges: salt spray, high humidity, limited access and elevated service costs. Corrosion protection and in-service condition monitoring become even more critical. A seemingly low-cost fastener can result in a higher total cost of ownership (TCO) if it requires frequent retightening, lacks traceability or suffers premature failure.

Smart Fastening Solutions

Smart fasteners are often oversimplified as bolts with embedded chips, but the technology landscape is far more diverse. The first core function is digital identification: RFID or NFC tags can store part numbers, installation locations, installation dates and maintenance records. This addresses basic traceability: identifying the fastener, its origin and its installed position. The second function is condition sensing. Strain gauges, thin-film sensors, piezoelectric elements, fiber Bragg gratings and smart washers can all be used to monitor preload, applied load, temperature or loosening. The third layer is connectivity and data analytics: measurement data is transmitted via wired, wireless or RFID systems to build a historical record of joint condition. Identification, sensing

and connectivity can be integrated into a single solution, or deployed separately. Not every smart fastening application requires the same sensor or chip technology. Fraunhofer's Q‑Bo® smar t joint system ser ves as a practical example. It uses a thin‑film sensor to measure clamp force and temperature, transmits data via low‑power wireless communication, and can harvest energy from temperature differentials. For wind‑turbine‑specific validation, Fraunhofer IWES has also tested strain‑gauged bolts on a scaled wind turbine drivetrain test rig to obser ve load and preload variations in a hub‑to‑main‑shaft flange interface. These technologies point to a potential shif t from scheduled manual inspection to condition-based maintenance, but they are not yet widely adopted in the industry. Sensors add cost and present challenges related to power supply, calibration, temperature compensation and long-term durability. If sensor integration requires modifications to bolt geometry, the resulting load capacity and fatigue performance must be fully revalidated. Smart fastening delivers real value only when the data is reliable and embedded into established maintenance workflows.

Electric Vehicle Fastening

New energy vehicles not only change the source of power, but also alter the application positions of fasteners. Batteryto-body mounting points, battery trays and covers, module assembly, high-voltage busbars, e-motors, power electronics, thermal management lines and high-voltage harness routing all demand specialized joint solutions.

CFM - Issue 47 - Sep. 2026

INSIGHTS The first consideration is structural safety. Battery packs are heavy and typically mounted low in the vehicle chassis. Their fastening points must withstand everyday vibration and shock loads, as well as crash impacts. U.S. FMVSS 305 includes requirements concerning the retention of rechargeable energy storage systems during and after crash testing, including restrictions on intrusion into the occupant compartment. This is not a specification for any single bolt, but it underscores that battery retention is a vehicle-level safety-critical issue. The second area is high-voltage electrical joints. Busbars transmit high currents throughout the battery and power distribution system. If a bolted busbar joint loses clamp force, contact quality can degrade, leading to increased electrical resistance and elevated temperatures. A high-voltage busbar joint must therefore be evaluated not just on torque or mechanical strength, but on clamp force, contact resistance, thermal behavior and long-term stability. A 2025 SAE research has addressed this topic through combined mechanical, electrical and thermal analysis. The third dimension is material compatibilit y and manufacturing integration. Battery systems incorporate a mix of materials: aluminum, steel, copper, plastics and composites. Mismatches in hardness, thermal expansion coefficients and electrochemical properties can cause embedding in softer materials, preload relaxation or galvanic corrosion. Battery enclosures may also require joints to provide sealing performance. Meanwhile, automotive production demands high-speed, automated and verifiable assembly processes, while serviceability and recyclability benefit from removable joint designs. This is why bolted joints will not simply be fully replaced by welding across all applications. Welding delivers high production efficiency and low electrical resistance, but mechanical fastening adds unique value in disassembly, rework, diagnostics and modular system design. The optimal joining method depends on the application location, base materials, current carr ying requirements, sealing needs, production cycle time and service requirements.

The Common Foundations of HighValue Fastening

Across wind energy, electric mobility and other high-end sectors, there is seldom a single "universal bolt" that solves every joint challenge. High value is delivered through a defined set of controllable, verifiable capabilities. First, application-aligned material selection. Strength, toughness and operating temperature range must be matched to actual load profiles and service environments. Second, surface and friction control. Coatings impact not only corrosion resistance, but also tightening friction coefficient and resultant

CFM - Issue 47 -Sep. 2026

clamp force. For high-strength steels, tighter process control is also required to mitigate hydrogen embrittlement risks introduced during manufacturing and surface finishing. Third, joint design and assembly process control. Torque is merely an input parameter at the tool; the target outcome is consistent, accurate clamp force. Tightening method, lubrication condition, mating surface quality and component tolerances all influence the result. Fourth, comprehensive testing. Tests of mechanical property, torque-clamp force, fatigue and corrosioneach address different performance aspects. No single test can validate the full service life of a joint in realworld operating conditions. Fifth, documentation and batch traceability. Records of material heat number, heat treatment, coating process, test results and production lot allow buyers to verify product origin and streamline root cause analysis in the event of a quality issue. Sixth, in-service maintenance support. For applications with difficult access or high downtime costs, preload inspection, condition trend monitoring and datadriven maintenance create new service-based value. This means fastener suppliers need to engage with customers on joint design much earlier in the development cycle, rather than waiting for finalized drawings to quote a unit price. Defining loads, materials, service environment, assembly methods and validation requirements upfront significantly reduces the need for costly rework later.

Extending the Same Logic to Other High-End Applications

The same value proposition applies across energy storage, hydrogen equipment, rail transit and aerospace. These sectors do not rely on a single standardized bolt. What unites them

What base materials are being joined — for example, aluminum, copper, plastics or composites? Will the joint be exposed to salt spray, humidity, temperature extremes, chemical media or hydrogen environments?

Which tightening method will be employed, and how will clamp force or installation quality be verified?

What test reports, material certificates, coating process records and batch traceability documentation are required? Does the joint require sealing, electrical conductivity, insulation, removability or condition monitoring capabilities?

is the high cost of joint failure, harsh operating environments and expensive maintenance — all factors that elevate the impor tance of process control and documented quality evidence. Aerospace of fer s a def initive example of rigorous traceability. NASA's standards for mission hardware fasteners cover procurement , incoming inspec tion, testing , lot traceability and storage conditions. While these requirements c annot b e dire c t ly t r ans fe r re d to ge ne r al indus t r ial procurement, they demonstrate that in high-consequence applications, material and batch documentation are intrinsic to product value. Hydrogen-related equipment also brings material embrittlement into sharp focus. Hydrogen can be introduced during manufacturing, surface finishing or service operation, and high-strength steels typically require much tighter process control. It would be inaccurate to claim that a standard highstrength bolt is inherently suitable for high-pressure hydrogen service. Suitability must be assessed against the specific medium, pressure level, base material and applicable industry standards.

These questions reframe the procurement task from sourcing a commodity bolt to delivering a joint solution. A fastener does not inherently deliver higher value simply because it is larger, stronger or fitted with a sensor chip. Its true value lies in reducing uncertainty around joint performance, enhancing safet y of critical equipment, and improving verifiability and maintainability over the asset lifecycle.

Key Questions for Procuring HighValue Fastening Solutions

For safety-critical or performance-critical applications, specifying only thread size, property class and quantity is insufficient. An effective technical RFQ should address at minimum the following questions: What loads act on the joint, and is there vibration or long-term cyclic loading?

CFM - Issue 47 - Sep. 2026

INSIGHTS Tariff Differentials Reshape Global Fastener Sourcing:

Chinese Products Face Duties Ranging From 0% to 83.6%

lobal demand for fasteners has not seen a material contraction in 2026. Instead, the structural shift lies in the tariff cost composition underlying every purchase order. The same shipment of Chinese-made fasteners qualifies for duty-free entry into Australia when it meets the China-Australia Free Trade Agreement (ChAFTA) rules of origin and is accompanied by the required documentation. They typically attract a 5% standard customs duty in the UAE. Yet when shipped to the United States, they face combined duties of 75% to 83.6%. In Canada, cer tain carbon steel screws may face a 25% derivative-product sur tax, a 170% antidumping duty and an additional countervailing duty charged by weight.

W h il e d e m a n d f r o m g l o b a l buyers remains inelastic, their sourcing decisions have shifted from straightforward price comparison to full-chain landed cost analysis. 98

CFM - Issue 47 -Sep. 2026

North America:

Base Tariffs No Longer Drive Core Costs United States: Combined Duties Top 80% for Standard Steel Fasteners

As of August 2026, the key tariff risk in the U.S. market comes not from any single trade measure, but from the cumulative impact of stacked duties across multiple trade regimes. Take HTS 7318.15.80 — which covers other iron and steel screws and bolts with shanks or threads of 6 mm or more in diameter — as a reference example. The standard statutory duty for this heading is 8.5%. Goods of Chinese origin under this classification are also subject to a 25% Section 301 tariff. Effective April 6, 2026, this HTS code was added to Annex I-A of the revised Section 232 metals program. The Section 232 levy is now assessed on the full customs value of the finished imported article, rather than solely on the value of its steel content.

This brings the total duty calculation to: 8.5% base duty + 25% Section 301 duty + 50% Section 232 duty = 83.5% combined rate For self-tapping screws under HTS 7318.14.10, the combined rate is roughly 81.2%, while HTS 7318.14.50 hits 83.6%. Even bolts and nuts with a zero base duty still face a combined 75% levy from Section 301 and Section 232 measures. In July 2026, the U.S. introduced an additional 12.5% Section 301 duty linked to forced-labor import prohibitions. However, products already subject to Section 232 metals tariffs are exempt from this new measure. This 12.5% rate should not be stacked mechanically on top of the combined rates set out above. For U.S. buyers, quotes based solely on FOB terms no longer hold meaningful reference value. The competitiveness of duty-paid landed cost has become the core decision-making metric.

the export price and impose corresponding anti-dumping duties. A countervailing duty of RMB 1.25 per kilogram may also apply. This means total duty exposure for affected products can reach: 25% steel derivative surtax + 170% anti-dumping duty + weight-based countervailing duty Total rates can surpass 195% in extreme scenarios. Canada market access cannot be judged solely by its zero headline MFN tariff.

EU and Mexico:

Trade Remedy Scope Determines Actual Market Access

Canada: The 25% Surtax Is Just the First Layer of Duty Exposure

Under Canada's 2026 tariff schedule, fasteners classified under headings 7318.14, 7318.15 and 7318.16 carry a 0% MostFavored-Nation (MFN) duty rate. However, since December 26, 2025, Canada has imposed a 25% ad valorem surtax on the full value of specified steel derivative products from all origins. The list explicitly includes screws, bolts, nuts, washers, rivets and other fasteners under HS heading 7318. A more significant cost risk comes from trade remedy measures under Canada's Special Import Measures Act (SIMA). For certain carbon steel screws from China subject to antidumping proceedings, if an exporter cannot provide valid normal value documentation, the Canada Border Services Agency (CBSA) may set the normal value at a 170% uplift from

The EU's standard customs duty for most fasteners under HS heading 7318 is around 3.7%, a relatively low nominal rate. However, certain non-stainless steel fasteners from China are subject to anti-dumping duties ranging from 22.1% to 86.5%, depending on the manufacturer. Combined with the 3.7% base duty, the total customs burden ranges from roughly 25.8% to 90.2%. In addition, the EU Carbon Border Adjustment Mechanism (CBAM) entered its definitive phase on Januar y 1, 2026. Importers above the exemption threshold must purchase and surrender CBAM certificates matching the embedded carbon emissions of covered goods. CBAM is not a fixed-percentage tariff. Its cost depends on the product's verified embedded emissions, EU Allowance (EUA) market prices, applicable benchmarks, and any carbon price already paid in the country of origin. It is therefore misleading to present CBAM as a flat 5% or 10% tariff surcharge. For exporters, quotes for the EU market need to answer three core questions: Is the product subject to an anti-dumping order? What producer-specific duty rate applies? Can the manufacturer provide verifiable emissions data? CFM - Issue 47 - Sep. 2026

INSIGHTS origin goods under ChAFTA, provided the required origin documentation is presented. The disparity between duty rates of 0%, 5%, 35% and 83.6% is now wide enough to prompt global buyers to restructure their sourcing strategies

Demand Remains Steady

—But Buyer Sourcing Practices Have Evolved

Mexico's tariff structure is simpler. Under its official tariff decree of April 23, 2026, a 35% import duty applies to products including other screws and bolts under 7318.15.99, nuts under 7318.16.06, and various washers, rivets and pins. Since China and Mexico do not have a free trade agreement covering these products, the 35% rate represents the baseline duty for most Chinese exporters.

Emerging Markets:

Not All Duty-Free, But Rate Gaps Are Wide Enough to Shift Sourcing Patterns

India imposes a 15% basic customs duty on other screws and bolts under 7318.15.00 and nuts under 7318.16.00. On top of this, a Social Welfare Surcharge — generally 10% of the basic customs duty — and 18% Integrated Goods and Services Tax (IGST) are levied, calculated on the sum of the CIF value, basic duty and surcharge. For a shipment with a CIF value of 100, the total border levy comes to roughly 37.47 of the CIF value. Notably, IGST is generally creditable for eligible registered Indian importers. The 37.47% figure therefore reflects border cash outflow rather than a fully irrecoverable final cost. By contrast, Vietnam offers significantly more preferential tariff access. Under the ASEAN-China Free Trade Area (ACFTA) framework, eligible Chinese fasteners accompanied by a valid Form E certificate of origin enjoy a 0% duty rate under headings 7318.14.10 and 7318.14.90. The ACFTA rate is 5% for 7318.15.10 and 0% for 7318.15.90. Nuts under 7318.16.10 and 7318.16.90 also enter duty-free. The UAE generally levies a 5% customs duty calculated on CIF value. Australia grants duty-free access to eligible Chinese-

100

CFM - Issue 47 -Sep. 2026

In the past, fastener exporters could win orders simply by demonstrating their manufacturing capabilities. Today, buyers increasingly expect suppliers to provide a full set of information alongside quotes: estimated tariff classification in the destination country, eligibility requirements for preferential origin treatment, a preliminary check of trade remedy scope, material and property class certifications, carbon emissions and environmental compliance data, and a destination-specific landed cost estimate. For Chine se f as tener manuf ac turer s , new mar ket opportunities are not limited to targeting countries with lower tariffs. More importantly, they need to ensure that when buyers search for specific products, they can easily find information on the company's specification capabilities, certification credentials, packaging solutions, lead times and dut y implications in target markets. Entr y barriers continue to rise in traditional mature markets, while demand in emerging markets keeps growing steadily. Orders will not automatically flow to the markets with the lowest tariffs. They will shift toward suppliers that are easy to find, have verifiable credentials, and can help buyers calculate the true total landed cost.

Exhibition

FES 2026 Wraps Up in Shanghai, Next Edition to Return in March 2027

he 16th Fastener Expo Shanghai (FES 2026) concluded successfully on June 26 at the National Exhibition and Convention Center (Shanghai), closing a three-day run from June 24 to 26, 2026. As Asia's largest dedicated fastener trade show, FES 2026 continued to emphasize professionalism, international reach and trade efficiency. Occupying Halls 1.1, 2.1 and 3 with a total exhibition area of 70,000 square meters, the event brought together nearly 1,400 exhibitors showcasing finished fasteners, manufacturing equipment, dies, wire rods and supporting products, building a full-spectrum platform that connects every link of the fastener supply chain.

102

CFM - Issue 47 -Sep. 2026

The 2026 edition delivered comprehensive upgrades across exhibition experience, procurement matching, industry exchange and international cooperation, fur ther strengthening FES's role as a platform connecting fastener industrial chain. The show recorded 51,903 trade visitor visits, including 4,578 from overseas. Over the three show days, FES 2026 pooled industrywide resources and saw strong ac tivit y in equipment procurement, international business matching and forum exchanges, reflecting the fastener sector's robust momentum in accelerated industrial upgrading and global integration. Since its debut in 2010, Fastener Expo Shanghai has evolved in lockstep with the industry's development. Built on 16 years of growth and industry insight, FES has remained at the forefront of the fastener sector, serving as a critical gateway for enterprises to access market opportunities, reach end-use customers and identify emerging industry trends. With three integrated halls creating diversified display scenarios, FES 2026 presented a complete picture of the evolving fastener industrial ecosystem. Halls 1.1 and 2.1, dedicated to finished fastener products, featured core lines including stainless steel standard fasteners, high-strength bolts, riveting components, washers and retaining rings, selfdrilling screws and nuts. Spanning end-use sectors from automotive, wind power and photovoltaics to machinery

Exhibition development and AI applications in export sales, delivering a high-value platform for in-depth industry dialogue and targeted business matching. One day ahead of the official show opening, the 2 nd National Fastener Distributor s Conference & Channel Partnership Meeting kicked off the FES 2026 program. Focused on distribution channel optimization and regional market expansion, the conference connected leading fastener brands with distributors nationwide to strengthen connections between suppliers and buyers. The 5th Fastener Anti-Loosening Performance Invitational Competition was also successfully held during the pre-show period.

manufac turing , construc tion, elec tronic s & elec trical appliances, rail transit and aerospace, the exhibits highlighted the industr y's latest progress in shif ting toward highperformance, application-specific and customized fastener solutions. Running in parallel with the main exhibition, the 2 nd Fastener Equipment Procurement Festival drove robust foot traffic and active deal-making in Hall 3, which hosted equipment, wire rod and die displays. Exhibitors showcased a full lineup of manufacturing solutions including cold heading machines, nut forming machines, thread rolling machines, tapping machines, packaging machines, screw assembly machines, CCD optical sorting machines, inspection systems and other intelligent production equipment, underscoring the fastener manufacturing sector's transition toward automation, smart manufacturing and greater operational efficiency. Meanwhile, dedicated industry pavilions from Haiyan, Jiashan and Wenzhou made a collec tive appearance, demonstrating each region's industrial achievements and distinctive competitive strengths. By gathering leading local enterprises under unified pavilions, these regional clusters created an efficient avenue for companies to showcase their capabilities, connect with prospective clients and expand cooperative partnerships. More than 10 specialized industr y forums were held concur rently with the e xhibition, cover ing indus tr ial ecosystem development, channel recruitment, anti-loosening technology, material trends, international procurement, talent

On the first exhibition day, the B2B International Buyer Matchmaking Session took center stage. Leveraging preevent procurement demand surveys and a precision matching process, the session welcomed buyers from Malaysia, Russia, Türkiye, the United Arab Emirates, Indonesia, South Korea, Brazil and other markets, enabling Chinese exhibitors to build targeted, efficient connections with overseas clients. The 5th Fastener Anti-Loosening Technology Forum was held the same day, where leading technical experts in the antiloosening field shared insights on product testing protocols, real-world application cases, technology advancement trends and R&D commercialization, creating a practice-oriented exchange platform for the industry.

CFM - Issue 47 - Sep. 2026

103

Exhibition On the second show day, the Annual Fastener Industry Technical Talent Index Release & Human Resources Symposium was convened, addressing core industry pain points including recruitment challenges, talent-position matching and longterm talent development.

The 5 t h National Indus tr ial Bar & Wire (Shanghai) Conference & Fastener Industry Development Conference brought together cross-sector stakeholders to discuss market outlook, product mix dynamics, EU CBAM regulatory compliance and fastener-grade steel applications, helping strengthen resource alignment and industrial collaboration among steel mills, distributors, wire drawing factories and fastener manufacturers. The inaugural Global Fastener Industr y Ecosystem Conference focused on end-to-end supply chain collaboration across fastener produc tion, distribution and end-use segments. Industr y association representatives, leading traders and core supply chain enterprise delegates gathered to explore new growth opportunities amid industry-wide efforts to shore up weak links and build a more resilient, integrated industrial ecosystem.

On the evening of June 25, the 2026 Xinggang Technology Screw Night & The Golden Screw Award Ceremony was held. As a premium networking gala in the fastener industry, the event expanded its scale to 1,000 attendees this year, bringing together association leaders, senior corporate executives, industr y professionals, scholars and overseas delegates. Multiple industr y accolades were presented during the 104

CFM - Issue 47 -Sep. 2026

ceremony to recognize outstanding innovative achievements and exemplary enterprises, setting new benchmarks for sectorwide development. On June 26, the final show day, the Fastener Youth Exchange Forum was held under the theme "AI Applications in Fastener Export Sales". The session explored practical AI use cases across key export scenarios including customer acquisition, content generation, client communication and business growth, offering actionable insights for fastener enterprises pursuing digitally driven global expansion. Separately, an Indian procurement delegation visited Gaojia Intelligent Equipment (Jiaxing) Co., Ltd. for an on-site inspection of its automatic oil removal equipment portfolio, including oil extractors for heading machines and oil filtration systems. The delegation reviewed the company's integrated solutions for oil recovery, iron scrap separation, labor cost reduction and safe, eco-friendly production, strengthening business exchanges and cooperation between overseas buyers and Chinese fastener equipment suppliers. While the 16th Fastener Expo Shanghai has drawn to a successful close, the connections and collaborations formed across the global fastener community will continue beyond the exhibition. The 17th Fastener Expo Shanghai will return to the National Exhibition and Convention Center (Shanghai) from March 3 to 5, 2027. We look forward to welcoming industry partners worldwide for the next chapter of shared industry growth.

Exhibition

Fastener Fair India 2026: New Production Technologies Debut at South Asia's Largest Fastener Show

astener Fair India, South Asia's largest fastener exhibition, opened its doors in Mumbai on July 24, 2026. CFM participated in the three-day event at Booth M3, Hall 14 with Issue 46 of China Fastener Magazine, delivering on-site coverage of the latest shifts in India's fastener supply chain. Covering the full industr y value chain, the show is organized into four themed sections: finished fasteners, upstream raw materials and tooling, automated production and testing equipment, and supporting services. Exhibits range from cold heading wire rods and cemented carbide

106

CFM - Issue 47 -Sep. 2026

dies to property class 8.8/10.9/12.9 high-strength automotive fasteners, construction expansion anchors and micro screws for electronics, as well as AI vision inspection systems and eco-friendly surface treatment technologies, showcasing the complete ecosystem of fastener manufacturing and end-use applications. High-strength automotive fasteners led all categories in inquiry volume by a substantial margin. Both new energy and traditional internal combustion engine automakers demonstrated strong purchasing interest in property class 8.8 to 12.9 bolts and chassis-specific fasteners. Driven by largescale infrastructure and real estate construction, orders for construction anchoring and expansion fasteners saw sharp growth. Demand for precision micro screws for electronics, buoyed by mobile phone and home appliance manufacturing, continued on an upward trajectory. Meanwhile, the ongoing capacity expansionamong local Indian manufacturers directly drove inquiries for cold heading equipment and cemented carbide dies, while fastener testing instruments also gained traction as factories stepped up quality control. The event drew buyers from industrial clusters across India, as well as from markets in South Asia, the Middle East, Africa and Southeast Asia, including Bangladesh, the UAE, South Africa and Malaysia.

Exhibition Table 1: India Fastener Import Data (Jan-June 2026) Month

Quantity (kg)

Value (USD)

Jan-26

18,213,239

104,008,483

Feb-26

17,603,657

101,764,889

Mar-26

15,579,253

93,072,773

Apr-26

15,044,554

97,059,368

May-26

18,174,646

104,226,902

Jun-26

23,204,104

96,723,718

Total

107,819,453

596,856,133

Table 2: India Fastener Export Data (Jan-June 2026) Month

Quantity (kg)

Value (USD)

Jan-26

26,729,289

71,895,782

Feb-26

25,649,817

70,292,838

Mar-26

25,491,034

66,673,315

Apr-26

26,328,968

74,368,816

May-26

27,599,755

72,912,037

Jun-26

26,550,700

72,403,519

Total

158,349,563

428,546,308

Cemented carbide dies with a 30% longer service life and micron-level precision areimproving the feasibility of massproducing fasteners with complex head geometries and micro threads. AI-powered in-line inspection systems, which perform fully automated sorting based on surface defects and dimensional specifications, effectively replace manual quality inspection and ease labor pressure on production floors. Additionally, lightweight boron steel fasteners, titanium alloy connectors and eco-friendly processes like chromiumfree Dacromet are positioned to address demand from India's new energy vehicle sector and align with the country's updated environmental regulations. As a key bridge connecting China's fastener industr y with global markets, CFM will continue to closely monitor developments in the Indian market and provide Chinese enterprises expanding internationally with up-to-date industry intelligence and business matching services.

According to data compiled by CFM, India impor ted approximately 107,800 metric tons of fasteners in the first six months of 2026, with a total value of USD 597 million and an average unit price of USD 5.54 per kilogram. Monthly import volumes fluctuated significantly. Volume trended downward from January to April, hit a trough in April, then recovered month on month. June imports reached 23,200 metric tons, the highest monthly total in H1 2026, while the unit price dropped sharply to USD 4.17 per kilogram - the lowest level in H1 2026 - creating a clear divergence between import volume and price. On the export front, India's fastener exports maintained steady overall performance. Total exports stood at around 158,300 metric tons, valued at USD 429 million, with an average unit price of USD 2.71 per kilogram. Both monthly export volume and unit price fluctuated within a tight range. Multiple new technologies made their debut at the exhibition. Chinese equipment suppliers launched integrated cold heading production lines that combine feeding, forming, thread rolling and heat treatment into a single workflow. Marketed as a low-cost retrofit solution, the lines are tailored for capacity expansion projects of small and medium-sized Indian manufacturers. CFM - Issue 47 - Sep. 2026

107

FASTENER EXHIBITIONS October 2026 - April 2027 China Fastener Exhibitions 17-19 2026

Oct.

21-23 21-23

2026

Nov. 2027

Feb. 2027

Mar.

12-13 26-28

13-15

3-5

13-15 2027

Apr.

24-26

27-29

Wenzhou Fastener Exhibition 中国 ( 温州 ) 国际紧固件博览会

Wenzhou International Convention & Exhibition Center

TITE x IHT

中国台灣國際五金工具博覽會 x 五金工業展 Taichung International Exhibition Center

Fastener Trade Show SuZhou & Nev Parts Exhibition 苏州国际紧固件及设备展

Suzhou International Expo Center

China (Jiaxing) International Fastener Industry Expo 中国 ( 嘉兴 ) 国际紧固件产业博览会

Jiaxing International Convention & Exhibition Center

Dongguan International Industrial Supply Chain Expo 东莞国际工业供应链博览会

Guangdong Modern International Exhibition Center

China Yongnian Fastener Product Fair 中国·永年标准件厂商联谊暨产品展示会 Handan (Yongnian) Fastener Expo Center

Fastener Expo Shanghai 上海紧固件专业展 Shanghai·China

Chongqing Fastener, Spring & Equipment Exhibition 第二十四届重庆紧固件弹簧及设备展览会 Chongqing International Expo Center

Northeast International Construction Hardware, Fasteners & Nailing Mesh Exhibition 东北国际建筑五金、紧固件及钉丝网展览会 Shenyang International Exhibition Center

China·Zhejiang International Industrial Supply Chain Expo 中国·浙江国际工业供应链博览会 Hangzhou International Expo Center

CFM Partner 108

CFM - Issue 47 -Sep. 2026

For business cooperation, please contact: Mobile:+86-18588814900 Email:editor@chinafastener.com

International Fastener Exhibitions 6-9 7-9 2026

Oct.

8-9 19-21 28-30

4-6 18-20 2026

Nov.

18-21 18-21 23-26

2027

Apr.

6-8

Fastenex

俄罗斯紧固件和焊接展 Moscow·Russia

Manufacturing World Osaka 日本 ( 大阪 ) 工业展 Osaka·Japan

International Fastener Expo 美国国际紧固件展

Phoenix, Arizona·U.S.A.

Fasttec

俄罗斯紧固件展 Moscow·Russia

Korea Metal Week 韩国金属周

Seoul·South Korea

Vietnam Industrial and Manufacturing Fair (VIMF) 越南国际工业制造及自动化展

Bac Ninh· Vietnam

Indusmach Tanzania 坦桑尼亚工业展

Dar-es-Salaam·Tanzania

Istanbul Hardware Fair 伊斯坦布尔紧固件展 Istanbul·Türkiye

METALEX

泰国曼谷工业及金属加工展 Bangkok · Thailand

Big 5

阿联酋迪拜五大行业展

Dubai · United Arab Emirates

Fastener Fair Global

德国斯图加特国际紧固件展 Stuttgart·Germany

CFM - Issue 47 - Sep. 2026

109

CERTIFICATED ACTIVE SUPPLIER

What is CAS?

Certificated Active Suppliers are competitive Chinese fastener suppliers with good reputation, credit and high quality which are audited by ChinaFastener.com regularly. Index of Buyer's Guide Bolts/Studs Screws Nuts

Rivets

Washers

Retaining Rings

Stainless Steel Fastener Scan QR code, Find them all on www.ChinaFastener.com

Non-Standard Fastener High Strength Fastener

CFM - Issue 47 -Sep. 2026

P113-114 P115 P116

P116-117 P117 P117 P118 P118

Equipment

P118-119

Die

P119-120

Tools and Other Fasteners 110

P111-113

P119

Ningbo Jiulongchuangzhan Fastener Holding Co., Ltd.

Ningbo ABC Fasteners Co., Ltd. 宁波联欣标准件有限公司

宁波九龙创展紧固件股份有限公司

Ningbo Jiulongchuangzhan Fastener Holding Co., Ltd. is an enterprise specializing in the production, research & development, sales, and technical service of high-strength fasteners. The products, including hexagon bolts, socket head screws, studs, hexagon nuts, welding studs, other high-strength fasteners, and non-standard fasteners made according to the drawings, are widely applicable in metallurgy, power, petrochemical industries, large span steel structure factories, high-rise buildings, wind power generation, railway bridges, cross-sea bridges, subways, oil refineries, etc. The company has passed the ISO9001:2015 Quality Management System, IATF 16949:2016, ISO14001:2015, and ISO45001:2018 certifications. All products adhere to the standards of GB, ISO, EN, DIN, ASME, JIS, BS, and other international standards.

Ningbo ABC Fasteners Co., Ltd. is one of the main manufacturers for building anchor in China. We are able to provide various kinds of anchor such as drop in anchor, wedge anchor, metal frame anchor, sleeve anchor, etc. We also provide standard & non standard parts.

86-574-62468311 sales@abcfasteners.cn www.abc-fasteners.com / abcfastener.chinafastener.com

86-574-86621795

Anchors

Zhejiang Xinchun Fastening Piece Co., Ltd.

广东法思特精密五金有限公司

Zhejiang Xinchun Fastening Piece Co.,Ltd is the enterprise which specializes in the development, sales, service, and production of industrial aluminum profiles, connectors, bolts, and more. The main products include the T-bolt, T-nut, Flange nut, Square nut, Spring nut, Channel nut, Cold forged nonstandard fasteners, Stainless steel bolts, Stainless steel nuts, and stainless steel pins.

info@xincjgj.net

Bolts

www.jiulongfstn.com / 121540.chinafastener.com

Fastener Group (Guangdong) Co., Ltd.

浙江信纯紧固件制造有限公司

86-578-2076677

sophie@jiulongfstn.com / sale@jiulongfstn.com

Fastener Group (Guangdong) (abbreviated as Guangdong FAST) is a leading manufacturer of stainless steel fasteners in China, founded in 2009 in Guangzhou. Currently, we have three manufacturing bases in Anhui, Guangdong and Jiangsu, with an annual capacity of 45,000 tons. The integration of manufacturing and trading results in competitiveness characterized by high quality, competitive prices and efficient service. We have established successful cooperation with clients in China, Europe, the USA, Australia, and countries in Southeast Asia, etc. One-stop purchasing solutions can be provided.

Bolts

www.xinchun.chinafastener.com www.zjxincjgj.com

86-18620607052 / 86-13660091816 2853575003@qq.com / ivy@fast-screws.com www.fastwj.com

Bolts/Screws

Jiaxing Xingxin Trade Co., Ltd.

Zhejiang Hystron Auto Parts Co.,Ltd.

Jiaxing Xingxin Standard Heat Treatment Co., Ltd is found in July 2005. It has grown to the leader of fastener heat and surface treatment in China. The main products including hex bolt, hex nut, drywall screw, threaded rod and washer etc.

HYSTRON is a professional designer and m a n u fa ct u re r o f c u sto m i ze d n u ts a n d standard nuts (such as DIN929, DIN928, GB13680, DIN74361, DIN6923, DIN1624). We have a monthly production capacity of 500 tons and advanced production equipment. Choose us for mutual benefits.

嘉兴兴欣贸易有限公司

浙江洪扬汽车零部件有限公司

86-573-86058220 allen@jx-xingxin.com www.jx-xingxin.com / xingxin.chinafastener.com

+86-573-86170668

Bolts

chenzhen@hystron.com www.hystron.com / hystron.chinafastener.com

Nuts

CFM - Issue 47 - Sep. 2026

111

华网出口通

Wenzhou FengDing Fastener Manufacturing Co., Ltd.

Cixi Jingeng Fastener Co., Ltd. 慈溪精耕紧固件有限公司

温州市丰鼎紧固件制造有限公司

Wenzhou FengDing Fastener Manufacturing Co., Ltd. was founded in 1997. The company mainly produces FD-branded flange bolts, flange cross screws, extra-large flat head screws, hex cross screws, combination bolts, automotive fasteners, wind energy fasteners, valve fasteners, fan fasteners, water pump fasteners, welding machine fasteners, and customized stainless steel flange bolts. Product standards include GB, QC, DIN, AS, ANSI/ASME, JIS, BS, etc.

Our company specializes in construction fasteners, which are widely used for outdoor walls, indoor decoration, and the fixing and installing of doors, windows, ceilings, air-conditioners, roof boards, floors, etc. Additionally, they are utilized for highway guards and photovoltaic equipment. The products are made of carbon steel, stainless steel, alloy steel, reinforced nylon, brass, zinc alloy and so on.

86-13484243398

86-18857755588

sales@chinaluosi.com

Anchors

www.chinaluosi.com jingeng.chinafastener.com

·In 1989, the Taiwan company was established. ·In 1993, Sanhewlett Metal Products (Shenzhen) Co., Ltd. was established in Mainland China. ·In 2005, to expand the production line, we moved to Dongguan and established Dongguan Sanhewlett Metal Products Co., Ltd. ·In March 2007, Liyou Metal Products (Tianjin) Co., Ltd. was established. ·The company passed the TUV ISO9001:2000 certification in September 2005. ·The company passed the TUV ISO/TS 16949 certification in September 2007, and updated to IATF 16949 in October 2017. ·The company passed ISO14001:2004 in December 2010.

GB798, JB/ZQ 4318, QC190/191,CNS 4490/4492，DIN444， PN 82425, GOST 3033, UNI 6058, AN165/170... HINGE SINCE 1973

86-13826902627

Eyebolt/ Hinge

biaoer.chinafastener.com

business@sanhewlett.com.cn WWW.SANHEWLETT.COM.CN

Handan Xinzhufeng Hardware Products Co., Ltd.

Haiyan Guangda Hardware Co., Ltd.

Our main products are hex bolts,hex nuts,flat wa s h e r s , s p r i n g wa s h e r s a n d a l l ot h e r standard and non-standard fasteners.

The company established in 1992, covering an area of 11,100square meters, with 24 forging machines and 24 threading machines, mainly produce hex bolts, flange bolts, carriage bolts, square head bolts, and non-standard bolts as required, assured with ISO 9001 and CE certificate.

0573-86408016

+86-13111353435 admin@everestfasteners.com www.everestfasteners.com / xinzhufeng.chinafastener.com

Bolts

海盐光大标准件股份有限公司

邯郸新朱峰五金制品有限公司

CFM - Issue 47 -Sep. 2026

Bolts

三合利金属制品（台山）有限公司

EYE BOLT

112

www.wzfengding.com / fengding.chinafastener.com

Sanhewlett Metal Products (Taishan) Co., Ltd.

Yuyao Biaoer Trading Co., Ltd. Yuyao No.2 Standard Fastener Factory

86-574-62003555 / 86-574-62003860 86-17357501777 / 15306621777 Mrs.lao/Mr.ruan ruanlifei@biaoer.com

wzfdjgj@163.com

Bolts

Guangda05@hygdbzj.com www.hygdbzj.com / guangda.chinafastener.com

Bolts

Yongnian County Tianbang Fasteners Co., Ltd.

Haiyan Yousun Enterprise Co., Ltd.

Yongnian County Tianbang Fasteners Co., Ltd. was established in 2005. We specialize in the manufacturing of various types of hex bolts, hex nuts, flat washers, threaded rods, anchor bolts, and non-standard fasteners, etc. With over 10 years of experience in research, development, and production, our products are exported to Europe, the United States, Southeast Asia, Russia, and other regions.

CHINFAST wholly owns two screw factories - Haiyan Yousun Enterprise Co., Ltd. and Joystart Automotive Parts Co., Ltd. YOUSUN factory's AD rate imposed by the EU is only 39.6% with tariff code: C788. Our YOUSUN factory is specialized in producing wood timber screws, chipboard screws and drywall screws with the production capacity of 1000 tons/month. The wood timber screw has an ETA certificate; the drywall screw and the chipboard screw have CE certificates. JOYSTART factory is specialized in the production and DIY package services for Advanced Multi-Purpose Screws, Stainless Steel Screws, etc. Welcome to visit us!

海盐友上五金有限公司

永年县天邦紧固件有限公司

+86-310-6731766 karryyan@hbtbls.com www.hbtbls.com/hbtbls.chinafastener.com

86-573-82119831

Bolts

vicky@yousunfastener.com

Screws

www.yousunfastener.com

NingBo Shengtai Fastener Technology Co., Ltd.

Shenzhen Shenhu Fasteners Industiral Co., Ltd.

Taric code C821-39.6%

Shenzhen Shenhu Fasteners Industiral Co., Ltd. was established in May 1984. We have obtained multiple system certifications, including IATF16949, ISO9001 and ISO45001, with full-process quality control implemented throughout. Our high-strength products featuring stainless steel and anti-corrosion coatings are suitable for industries demanding ultrahigh stability, including new energy, photovoltaic, energy storage, lithium battery, automotive, medical, communication, mechanical equipment and military sectors.

深圳深沪标准件实业有限公司

宁波盛泰紧固件科技有限公司

Main products: - wood construction screw - sandwich panel screw - bi metal screw - non standard screws

Screws with material: carbon steel and stainless steel 410/304/316 are all available

86-15058062341 yolanda@nbsunlong.com www.nbsunlong.com

86-13798584460 (wechat / whatsapp)

Screws

p2@szshenhu.com

Screws

www.shenhusz.com

Dongguan Dalang Yiding Screw Factory

Jiaxing Hongcheng Fastener Co., Ltd.

Set screws (slotted, Phillips, Torx, triangle, square, Y-slot), grub screws and special cold heading parts

We are a professional screw manufacturer, making fastener products of high quality at a competitive price. Our products include self-drilling screws, drywall screws, self-tapping screws, roofing screws, sandwich panel screws, etc. Size: as per customer's requirement. We can also make the customization according to your drawings or samples.

嘉兴宏诚精工科技股份有限公司

东莞市大朗易定螺丝厂

86-13537118163 723167268@qq.com https://qr.1688.com/s/LvE0k1lk CZ5688

86-13656733611

Screws

tony@hc-fastener.com www.hc-fastener.com www.hcseiko.com hongcheng.chinafastener.com

Screws

CFM - Issue 47 - Sep. 2026

113

华网出口通

Zhejiang Excellent Industries Co., Ltd.

Hisener Industrial Co., Ltd.

Zhejiang Excellent Industries Co., Ltd. was founded in 1997. We have two production bases (China: ZHEJIANG EXCELLENT and Vietnam: TINSING INDUSTRY), mainly producing screws, anchors and DIY Hardware kits. The monthly production capacity exceeds 2000 tons.

Hisener is a leading manufacturer of top quality screws, both carbon steel and stainless steel. We offer a complete range of high performance screws, including timber screws, chipboard screws, drywall screws, terrace screws, self-drilling screws, selftapping screws, machine screws, etc. Hisener, a reliable, supportive, innovative and loyal business partner, definitely is your best choice.

浙江天开实业有限公司

浙江海迅精密科技有限公司

86-18257387376 fangx@excellenthardware.com www.excellenthardware.com excellenthardware.chinafastener.com

86-13819084509

Screws

simon@hisener.com www.hisener.com

Jiaxing Zhengying Hardware Co., Ltd.

Hangzhou Lizhan Hardware Co., Ltd.

Jiaxing zhengying Hardware Co., Ltd. was founded in 2005. It is a Mainland-Hongkong joining venture company. Our productions include chipboard screw, drywall screw, drilling screw, machine screw, non-standard fasteners, etc. The annual production capability can reach The annual production capability can reach to 3000-5000 tons.

Started in 2007, with more than 10,000 square meters of workshop and package warehouse, we offer screws for composite deck, windows, concrete, wood, furniture, steel pipe, roofing and customized items. Monthly production yield is more than 2,000 tons, and we are increasing day by day. We sincerely hope for your cooperation and trust.

杭州力展五金有限公司

嘉兴正英五金有限公司

86-573-85535366 jxzywj@jxzywj.com www.zhengying.chinafastener.com

Screws

86-13968092329

Screws

carrie@lizhan-hardware.net lizhanhardware.chinafastener.com

Screws

www.lizhan-hardware.net

Uni-Protech Fasteners (Suzhou) Co., Ltd.

Shanghai Kingpluse Industry Co., Ltd.

UNI-PROTECH was founded in 1992 and established its China branch in 2010. Our products serve the automotive, solar panel, EV, mining and construction industries. Our laboratory holds ISO17025 certification, and the entire group is ISO9001 certified to guarantee product quality and reliability.

KINGPLUSE, ISO9001:2008 certified, is a professional manufacturer and exporter of screws, bolts and nuts, as well as an exporter of a wide range of industrial and constructive fasteners. Main products are self-driling screws, roofing screws, hex head bolts, and customized products.

苏州致韦贸易有限公司

86-512-68361603 eli@uni-protech.com.tw www.uni-protech.com.tw / uni-protech.chinafastener.com

114

CFM - Issue 47 -Sep. 2026

上海劲烁实业有限公司

86-21-57733852

Screws

bacon@kp-industry.com www.kp-industry.com / kingpluse.chinafastener.com

Screws

Zhejiang Xianchuang Automobile Parts Co., Ltd.

Shanghai Welfast Enterprise Co., Ltd. 上海瑞固实业有限公司

浙江先创汽车零部件有限公司

Founded in 2000, Zhejiang Xianchuang covers an area of 22,000 square meters and is a well-known manufacturer in the auto parts industry. The company has equipped itself with advanced domestic and international production and testing equipment, and a one-stop production chain including material restructuring, molding, machining, modulation, and surface treatment, as well as a mature integrated packaging and storage system. The company has passed ISO9001 international quality system certification and IATF16949 quality system certification and has its export right.

We are specialized in producing and exporting fasteners according to the standards of DIN, ANSI/ASME, ISO, BS, etc. Our products are mainly Hexagon nuts, Flange nuts, Coupler nuts, Nylon nuts, U-Bolts, and so on.

+86-21-62442081

86-18958860888

sales@welfast.com

Nuts

welfast.chinafastener.com

有为汽车零部件 ( 嘉兴 ) 有限公司

Nuts

浙江安盛汽车零部件有限公司

Located on the north side of Hangzhou Bay with superior location and easy access to transport, our company covers 20,000 m2 with 130 staff. Boasting 12,000-ton annual output, we have full-set production & testing facilities, specializing in high-end fasteners, stamped and injection-molded parts for automotive, machinery and home appliances.

T h e co m pa n y a l wa y s wo r k s fa i t h f u l l y, professionally and people oriented to increase the quality of products constantly and create famous corporation. Products: DIN985 DIN982 ANSI BSF NYLON LOCK NUT, DIN1587 CAP NUT, DIN6923 etc.

86-15157799099

86-573-86857371

sales10@yw-f.com

Nuts

www.yw-f.com

Dongguan Grand Metal Precision Tech Industrial Limited 东莞市昕艺精密五金有限公司

Grand Metal produces self-clinch nuts, standoff, studs equivalent to PEM standard, rivet nuts, weld studs, cage nuts, brass inserts and customized parts for CNC and cold forging, 200 millions stock, 5000+ items, PPAP and IMDS for automotive industry, IATF 16949 certificated . Most quotation can be obtained within 24-48 hours, with samples usually available within one week.

86-13929204841 www.grandametal.com grandametal.chinafastener.com

www.showstrong.com / showstrong.chinafastener.com

Zhejiang Ansheng Automobile Parts Co., Ltd.

Youwei Auto Parts (Jiaxing) Co., Ltd.

zhuyb@grandametal.com

jamenzhang@showstrong.com

sales@zjansheng.com.cn www.zjansheng.com.cn / Pioneer.chinafastener.com

Nuts

Jiaxing Lixin Fasteners Co., Ltd. 嘉兴立欣紧固件股份有限公司

We are the professional manufacturer for kind of nuts.Our main producuts are DIN980V/DIN6927/DIN929/DIN928/DIN6923/ DIN439/DIN936/DIN557 etc.

86-573-85583150

Self-clinching nuts/screws

lxfasteners@vip.163.com www.zhapuNUT.chinafastener.com

Nuts

www.lxfasteners.com

CFM - Issue 47 - Sep. 2026

115

华网出口通

Shanghai Fast-Fix Rivet Corp.

SRC Metal (Shanghai) Co., Ltd.

Shanghai Fast-Fix Rivet Corp. is a Chinese leader in Blind riveting systems. We have two rivet factories We are ISO9001 and IATF196949 certified, with 80% products exported to worldwide. We offer a comprehensive line of blind rivet, including open type blind rivets, closed-end rivet, multi-grip rivet, tri-fold rivet, peel type, grooved, and high strength structural rivets.

Established in 1983, SRC specializes in BLIND RIVETS, BLIND RIVET NUTS, & RIVETING TOOLS manufacturing. We can manufacture 6 billion blind rivets that meet DIN 7337, IFI and ISO standards annually – production power that most competitors simply can't match. We also produce up to 2 million high-quality riveters annually, leaving no doubt that we can cover your largest, most demanding orders. For more details, visit our website today.

上海飞可斯铆钉有限公司

恒昭金属制品（上海）有限公司

86-21-58912860 sales@rivet-china.com www.rivet-china.com fastfixrivet.chinafastener.com

86-21-57745555

Rivets & Self-clinching

深圳市朗固精密五金有限公司

中山澄翰五金制品有限公司

Zhongshan Chehan Hardware Products Co., Ltd. (CHEHAN RIVETS & FASTENERS) was established in Zhongshan City, Guangdong Province, China in 2002 by Mr. James from Taiwan. With over 20 years of industry experience, we have actively expanded into the Chinese market and export markets, and have become a trusted and excellent supplier for many customers. Our company specializes in the production and sale of various rivets and riveting fasteners. We offer a wide range of materials, as well as multiple surface treatment processes and colors. In addition to our standard products, we also provide custom rivets and non-standard fastener solutions.

Established in 2006, it specializes in the production of fasteners for sheet metal riveting applications. The products are mainly used in industries such as communication cabinets, instrument cabinets, energy storage equipment, medical equipment, household electrical appliances, automobiles, and highspeed railways.

86-13510980258 www.szlangu.com

+86-760-22284520

Rivets

Shanghai Shangdian Washer Co., Ltd.

86-13788982145

116

CFM - Issue 47 -Sep. 2026

Rivets & Self-clinching fastener & Stinless steel fastener

chfastener.chinafastener.com www.chfastener.com We chat/Whats app/Telegram:+86-13809682476

苏州友尼可紧固件有限公司

Shanghai Shangdian Washer Co., Ltd. is a washer manufacturing company located in Shanghai, China, established in the early 1960s. We specialize in producing all types of washers, including flat washers, wave spring washers, spring lock washers, deformed washers for automobiles, square taper washers, square hole washers, conical spring washers, serrated lock washers, toothed lock washers, round washers, and plastic washers. We can utilize any material, ranging from Aluminum and Brass to Titanium and Viton, in accordance with DIN, BS, ANSI, ASTM, JIS, and NF standards.

www.shwasher.com / shangdian.chinafastener.com

james@chfastener.com

Suzhou YNK Fastener Co., Ltd.

上海上垫垫圈有限公司

sunjin@shwasher.com

Rivets & Self-clinching

www.srcrivet.com srcrivet.chinafastener.com

Zhongshan City Chehan Hardware Products Co., Ltd.

Shenzhen Langgu Precision Hardware Co., Ltd.

Youk@szlangu.com

srcmetal@srcrivet.com

Founded in 1988, YNK is one of the most reliable manufacturers of washers and high strength threaded rods with production capacity reaching over 2,000 tons/month. Our company is capable of manufacturing all types of standard and customized carbon steel washers, DIN976/B7 threaded rods. Our company is certified according to ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and EN14399-1:2015.

86-15250117179

Washers

joy@ynkfastener.com www.ynkfastener.com / ynk.chinafastener.com

Washers

Jiaxing Risen Hardware Co., Ltd.

Suzhou Baisiwei Hardware Co., Ltd.

Our main products are Hex Head Bolts, Flange Bolts, Countersunk Bolts, Carriage Bolts, Hex Wood Screws, Chipboard Screws, Nuts, Threaded Rods, Studs, etc.

Suzhou Baisiwei Hardware Co., Ltd.is one professional fasteners company, established in Suzhou City, China since 2008. We supply a wide range of fasteners. It includes both standard and customized washers, nuts, bolts, threaded rods, anchors, screws, stamping parts, threaded plates and assemble parts in carbon steel, stainless steel, aluminum, etc.

苏州柏斯威五金有限公司

嘉兴日森五金有限公司

86-573-83719336

86-18913557228

Sales@risen-fasteber.com

Bolts

www.risen-fastener.com

Yichang City Hengchang Fasteners Co., Ltd.

嘉兴迅宇贸易有限公司

Hengchang is leader factory of spring washer and cotter pins in mid-china.it was built in 1966 and passed TS16949 at 2006.products service to car and train industry well.The capacity is over 10000 tons.we are famouse with high quality and good service.

Jiaxing Xunyu Trade Co., Ltd. was founded in 2003. Our products include flat washers, spring washers, thread rods, non-standard fasteners, etc. Our production capacity reaches 300 tons per month.

86-717- 6913257 hcbzj.chinafastener.com

Washers

www.baswellhardware.com

Jiaxing Xunyu Trade Co., Ltd.

宜昌市恒昌标准件有限责任公司

hcfasteners@vip.163.com

info@baswellhardware.com

86-18358399319

Washers

vincent@xyufastener.com

Washers

www.xyufastener.com

Cargin Fasteners Co., Ltd.

Dongtai QB Stainless Steel Co., Ltd.

Cargin Fastener Company is a manufacture of circlips,washers,rings based on many standards.With advanced machines and more than 20 year's experience, we provide our customers high-quality product,DIY package,reasonable price,on-time delivery and good service.Having customers from all around the world, we are here to wait for you.

Dongtai QB Fasteners Factory (Dongtai Qindong High Strength Standard Factory) was founded in 1976, dedicated to the manufacture of stainless steel fasteners. It can produce all kinds of high quality products such as bolts, nuts, screws, drawn wire and other off-standard fasteners.

嘉紧紧固件有限公司

东台市溱标不锈钢有限公司

86-13906641106 asher@cargin.cn www.cargin.cn

86-515-85520679

Retaining Rings

DAVY@QBFASTENER.COM www.QB.chinafastener.com

Stainless Steel Fastener

www.qbfastener.com

CFM - Issue 47 - Sep. 2026

117

华网出口通

Dongguan Yuet Chung Metalware Manufacturing Limited

Wenzhou Riyi Standard Components Co., Ltd.

东莞悦忠金属制品有限公司

温州日一标准件有限公司

Wenzhou Riyi Standard Components Co., Ltd. is a technology-driven enterprise, specializing in the research, development, manufacturing and sales of non-standard fasteners. The production process mainly includes cold heading, CNC machining, and stamping. We can provide flexible customized services for industrial components according to the requirements of customers, drawings or samples.

Over 50 years of experience in stamping forming non-standard parts with good quality, reasonable price and responsibility.

86-15257728616 86-0577 85628011 rsluosi@foxmail.com wzrybzj.en.alibaba.com

WeChat

NonStandard Fastener

Jiaxing Sunrise Import & Export Co., Ltd. 嘉兴华昕进出口有限公司

Beijing Jinzhaobo High Strength Fastener Co., Ltd.

+86-15130012227

Non-Standard Fastener

info@jzbolts.com www.jzbolts.com www.bjzhaobo.com

High Strength Fastener

Wenzhou Gongyou Automatic Packaging Equipment Co., Ltd.

Jiashan Sanyung Electric Furnace Industry Co., Ltd.

Our equipment is widely used in the packaging of metal stamping parts, plastic parts, auto parts, screws and other hardware fasteners; it is suitable for accessories of various shapes such as granules, blocks, sheets, strips, etc. Gongyou packing machine boasts high cost-performance advantages including simple operation and programming, a wide range of applications, high efficiency, and strong operational stability. I believe it will be your best choice.

San Yung is a professional manufacturer of high-quality heat treatment machines. Since its establishment in 1970, San Yung's brand has been affirmed by all of our customers. Now we mainly have products such as: applications for continuous bright carburizing (tempering) quenching furnaces, continuous hot blast non-oxidation annealing (spheroidizing) furnaces, etc.

嘉善三永电炉工业有限公司

温州工友自动包装设备有限公司

86-13857772345 gytech-01@gonyopacking.com gonyopacking.com

118

Non-Standard Parts

www.yuet-chung.com.hk

Beijing Jinzhaobo High Strength Fastener Co., Ltd, established in 2000, is an industrial company with large-scale production of highstrength fasteners in Beijing. The products are widely used in various types of steel industrial buildings.

86-573- 84893440 sunrisefastener.chinafastener.com

service@yuet-chung.com.hk

北京金兆博高强度紧固件有限公司

"It takes months to earn a customer and seconds to lose one..." Sunrise is one such company that understands this. Therefore, we offer high-quality products while ensuring customer satisfaction and longterm customer relationships.

admin@hxsunrise.com

86-769-85545611 / 852-27562811

CFM - Issue 47 -Sep. 2026

86-18258308999

Equipment

18258308999@139.com www.sanyung.com

Equipment

Dongguan AnXiang Intelligent Packing Equipment Co.,Ltd

Jiangyin Tengma Standard Tools Co., Ltd.

AX-Pack is a main manufacturer of high-speed precise counting and packaging equipment based in China. We base in Dongguan city, near Guangzhou and Shenzhen, with two factories which cover more than 20,000 square meters. With more than 10 years development in the packing industry, We commit to r e s ea r c h a n d d e v e l o p m e n t , manufacturing, production, has a wealth of packaging intelligent system integration solutions experience. Our solutions can be optimized for different customer requirements and environments.

If you're looking for something efficient and reliable, our product is definitely worth considering. We continuously innovate our products based on customer feedback to stay ahead of the curve.

东莞市安翔智能包装设备有限公司

86-18929294698

Visual Counting Packaging Machine

connie@ax-pack.com www.dgaxvision.com

Shanghai Juhong Industrial Co., Ltd. 上海巨鸿实业有限公司

www.jytengma.cn

Tools and Other Fasteners

Hebei Chaoyue Standard Fastener Mould Co., Ltd.

Main Products: Header punches (second punches), Carbide dies, First punches, Trimming dies, Thread rolling dies, Wire drawing dies, K.O. pins, Drywall screws, and Chipboard screws.

86-18631721110

Tools and Other Fasteners

Haiyan Jieng Beeing Metal Products Co., Ltd. 海盐精斌五金制品有限公司

Thread Rolling Die for 10.9/12.9/Stainless Second Punch & Pin

MAThread & CONTI Licensee ISO 9001 & ISO 14001

More than 30 countries selling

86-13586360588 maggieyang@mail.jpmetalgroup.com.tw

hbcymj@qq.com

Die

www.chaoyuemould.com

LeeSheng Industry Co., Ltd. 深圳市利盛五金螺丝模具有限公司 Leesheng is a professional manufacturer of fastener forming tools, such as heading dies, shear dies, cutting knives, punches, punch cases, hex punches, and pins, as well as all kinds of HSS and carbide tools.

＜ JP ＞ Brand since 1973

www.jpmetalgroup.com.tw/en

david@jytengma.cn

Chaoyue Mould is a professional screw and bolt mould manufacturer. The company has a production workshop covering an area of 7200 m². In addition to mould manufacturing, we also produce some drywall screws and chipboard screws.

86-13321985721 gfx118.luosi.com

86-15152298388

河北超跃标准件模具股份有限公司

Juhong Tools has advanced equipment and twenty years of experience, and has been recognized by customers from all over the world. Main products: Screw bits, Socket bits, Hex wrenches, Drills and other non-standard tools

jay.juhongtools@foxmail.com

江阴市腾马标准件工具有限公司

86-13823754343

TRD and Punch

LSMOULD168@126.COM WWW.LS-TOOL.CN

Die

CFM - Issue 47 - Sep. 2026

119

华网出口通

Suzhou JUNGU Precision Mould Co., Ltd.

Kunshan Datong Precision Dies Co., Ltd. 昆山大同精密模具有限公司

苏州钧固精密模具有限公司

JunGu produces high-quality moulds with advanced production and testing equipment such as +GF+ Slow Wire Cutting Machine, MAKINO Electrical Discharge Machining, and Mitutoyo Coordinate Measuring Machine. It has adopted ERP, MES and simulation software to optimize the production process and form a unique processing system, providing customers with high-precision, fast delivery, and high-level moulds at competitive prices, ensuring stable and efficient production for customers.

Kunshan Datong Precision Dies Co., Ltd., founded in 2005, is a technology-oriented enterprise focusing on the manufacturing of cold heading dies and accessories. The company owns more than 6,000 square meters of production plants, and more than 70 sets of production and processing equipment. The company has more than 50 employees, and the core staff has nearly 30 years of industry experience.

86-13764335488 / 86-13915790298 (WhatsApp)

86-18662459572 ksdatong@163.com www.ksdatong.com

120

CFM - Issue 47 -Sep. 2026

Die

info@jungumolding.com www.jungumoulds.com / jungu.chinafastener.com

Die

CFM - Issue 47 - Sep. 2026

121

INDEX OF ADVERTISERS 广告索引 Steel Structure Bolt Connection Pair Steel Structure Bolt Connection Pair Flange Bolts T-bolts Other Special Bolts Other Special Bolts Long Screws Long Screws Long Screws Machine Screws Machine Screws Drilling Screws Drilling Screws Drilling Screws Wood Screws Hex Nuts Metal Locking Nuts Metal Locking Nuts Nylon Locking Nuts Welding Nuts Plain Washers Plain Washers Plain Washers Plain Washers Rings Double Fold Self-locking Washer Blind Rivets Structural Rivets Self-clinching Screws Wedge Anchors Stainless steel bolts Heat Treatment Equipment Packaging Machine Packaging Machine Forming Die Forming Die Thread Rolling Die Thread Rolling Wheel Magazine Exhibition Exhibition Exhibition Exhibition Exhibition

Beijing Jinzhaobo High Strength Fastener Co., Ltd. ·················································· P43 北京金兆博高强度紧固件有限公司 Ningbo Jiulongchuangzhan Fasteners Holding Co., Ltd. ·········································· P16 宁波九龙创展紧固件股份有限公司 Wenzhou Fengding Fastener Manufacturing Co., Ltd. ················································ P21 温州市丰鼎紧固件制造有限公司 Zhejiang Xinchun Fastening Piece Co., Ltd. ····································································· P3 浙江信纯紧固件制造有限公司 Wenzhou Riyi Standard Components Co., Ltd. ······························································P41 温州日一标准件有限公司 Yuyao No.2 Standard Fastener Factory ········································································· P35 余姚市高中压标准件二厂 CHINFAST Co., Ltd. ································································································· Front Cover 嘉兴市锋捷贸易有限公司 Hisener Industrial Co., Ltd. ·························································································· P24-25 海宁市海迅贸易有限公司 Jiaxing Zhengying Hardware Co., Ltd. ············································································· P14 嘉兴正英五金有限公司 Shenzhen Shenhu Fasteners Industrial Co., Ltd. ·························································· P53 深圳深沪标准件实业有限公司 Sunco Industries Co., Ltd. Sunco Industries Co., Ltd. ·················································· P22 Jiaxing Hongcheng Fastener Co., Ltd. ··············································································P49 嘉兴宏诚精工科技股份有限公司 Jiaxing Xingxin Trade Co., Ltd. ···························································································P10 嘉兴兴欣贸易有限公司 NingBo Shengtai Fastener Technology Co., Ltd. ····························································P57 宁波盛泰紧固件科技有限公司 Zhejiang Excellent Industries Co., Ltd. ·····························································Back · Cover 浙江天开实业有限公司 Shanghai Welfast Enterprise Co., Ltd. ············································································· P17 上海瑞固实业有限公司 Jiaxing Lixin Fasteners Co., Ltd. ························································································ P15 嘉兴立欣紧固件股份有限公司 Youwei Auto Parts (Jiaxing) Co., Ltd. ·············································································· IBC 有为汽车零部件（嘉兴）有限公司 Zhejiang Ansheng Automobile Parts Co., Ltd. ······························································· P33 浙江安盛汽车零部件有限公司 Zhejiang Hystron Auto Parts Co., Ltd. ············································································· P18 浙江洪扬汽车零部件有限公司 Dongguan Yuet Chung Metalware Manufactory Limited ··········································· P47 东莞悦忠金属制品有限公司 Shanghai Shangdian Washer Co., Ltd. ··············································································· IFC 上海上垫垫圈有限公司 Suzhou Baisiwei Hardware Co., Ltd. ················································································ P45 苏州柏斯威五金有限公司 Suzhou YNK Fastener Co., Ltd. ···························································································· P2 苏州友尼可紧固件有限公司 Cargin Fastener Co., Ltd. ···································································································· P31 温州华泰紧固件有限公司 ( 温州嘉紧 ) Guangdong STL Fastening System Co., Ltd. ·····································································P20 广东史特牢紧扣系统有限公司 Shanghai Fast-Fix Rivet Corp. ·························································································· P8-9 上海飞可斯铆钉有限公司 SRC Metal (Shanghai) Co., Ltd. ····················································································· P12-13 恒昭金属制品 ( 上海 ) 有限公司 Shenzhen Langgu Precision Hardware Co., Ltd. ···························································· P59 深圳市朗固精密五金有限公司 Ningbo ABC Fasteners Co., Ltd. ··························································································· P1 宁波联欣标准件有限公司 Dongtai QB Stainless Steel Co., Ltd. ················································································· P4-5 东台市溱标不锈钢有限公司 Jiashan Sanyung Electric Furnace Industry Co., Ltd. ················································· P6-7 嘉善三永电炉工业有限公司 Dongguan AnXiang Intelligent Packing Equipment Co., Ltd. ···································· P19 东莞市安翔智能包装设备有限公司 Wenzhou Gongyou Automatic Packaging Equipment Co., Ltd. ································P11 温州工友自动包装设备有限公司 Hebei Chaoyue Standard Fastener Mould Co., Ltd. ···················································· P26 河北超跃标准件模具股份有限公司 Kunshan Datong Precision Dies Co., Ltd. ········································································· P51 昆山大同精密模具有限公司 Haiyan Jieng Beeing Metal Products Co., Ltd. ································································ P23 海盐精斌五金制品有限公司 Jiangyin Tengma Standard Tools Co., Ltd. ······································································P65 江阴市腾马标准件工具有限公司 China Fastener Magazine (CFM) ······················································································ P121 华人螺丝英文杂志 Fastener Expo Shanghai (FES) ·························································································· P105 上海紧固件专业展 Istanbul Hardware Fair ········································································································· P89 伊斯坦布尔紧固件展 Korea Metal Week ················································································································· P101 韩国金属周 Taiwan Int'l Tools & Hardware Expo x Int'l Hardware Expo Taiwan ······················ P81 (TiTE x IHT) 台湾国际五金工具博览会 x 五金工业展 Vietnam Industrial and Manufacturing Fair (VIMF) ····················································· P75 越南国际工业制造及自动化展览会

China Fastener Magazine

Part of China Fastener Group

Download or subscribe e-Magazine

Chairman Yang Junfeng / yangjf@luosi.com

Chief Editor Kelly Yuan / Kelly@chinafastener.com

Deputy Editor Erica Huang、Hailey / huangqf@luosi.com Graphic Design Wu Likui / wulk@luosi.com

Reviewer Gracie Wang / editor@chinafastener.com Disclaimer

The Publisher cannot be held responsible or liable for errors or omissions, during input or printing of any materials supplied or contained herein. The Publisher also cannot be held liable for any claims made by advertisers. The opinions expressed are not necessarily those of the Editor or the Publisher. The advertisers should be responsible for authorization of copyright of any materials provided.

All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means without the prior permission of the publisher. Annual subscription (4 issues) to non-trade and outside China is USD99.00.

We kindly invite submissions for consideration to editor@chinafastener.com

For advertising inquiries, please contact editor@chinafastener.com or 86-18688878737 广告刊登请联系 editor@chinafastener.com 或 86-18688878737

CFM China Fastener Magazine lssue 47