Steps to Install a Bathroom Mirror

How to Install a Bathroom Mirror

A mirror is essential in any bathroom, providing more than just practicality. Choosing the right mirror, especially with lit alternatives of custom mirrors in Sacramento, may make your room lighter and brighter, and strategic placement can create the appearance of additional space. This article will walk you through the procedures necessary to install your new mirror.

First and foremost, inspect your walls: Before drilling, pounding, or screwing into a wall, use a pipe, cable, and stud detector to see what's behind it. It's simpler to use and will alert you if any pipes, cables, or studs are in the area where you want to operate. Simply run it over the area's surface to see where the risks are.

Tools ● Spirit level ● Pencil, hammer, screwdriver, tape measure, dustpan, and brush ● Tile drill bit if drilling into tile ● Drill bits as needed ● Choose a hammer drill if drilling into masonry ● Ladder if needed

Materials ● Bathroom mirror, masking tape, dust sheets, and soft cloth ● Mirror fixings and wall plugs unless supplied with the mirror ● Pipe, cable and stud detector ● Safety goggles

Before installation Determine where you want to hang your bathroom mirror. However, over-the-sink is generally the most practical option. When installing a mains-powered lit mirror or one with a de-mister function, read the product instructions and be aware of the bathroom splash zones and where the mirror may be safely placed. Let's begin!

Step-by-step guide installation procedure!

Step 1: Using a pipe, cable, and stud detector, ensure that there are no concealed pipes or cables behind the wall surface. Sweep your hand slowly over the area you wish to drill into. If you must use a stepladder, ascertain it's properly set up on a level platform and that all work objects are clear of the ladder's bottom.

Step 2: Place the mirror against the wall. You may want assistance doing this, especially if the mirror is huge. Ensure the mirror is level using a spirit level, and mark the location of the fastening points using a pencil. Oversized mirrors or mirrored cabinets may have a somewhat different mounting method, such as brackets, so always read the installation directions for your specific mirror.

Step 3: Remove the mirror and place it somewhere secure and out of the way. Before drilling over a basin, cover it with a dust sheet.

Step 4: Mark the length of your wall plugs with a piece of tape on an appropriate drill bit for your wall to produce a convenient depth gauge. Some mirrors come with fixings, but these may only be suited for specific types of walls, so always verify and use the appropriate wall plugs and screws to support the mirror's weight you're hanging.

Step 5: Put on a pair of safety goggles and drill holes to the indicated depths in the marked spots. Remember that if drilling through a brick or stone wall, you may need to switch to hammer mode.

Step 6: Using a dustpan and brush, remove any dust. Tap the wall plugs in gently with a hammer to ensure they are flush with the wall.

Step 7: Install the plastic mirror washers on the back of the mirror and get the assistance of another pair of hands to help you situate the mirror on the wall. Line up the mirror holes and screw them in position. If you overtighten the screws, the mirror will fracture. However, if the mirror does not come with the anchoring screws, use mirror screws with chrome-colored coverings for a tidy finish.

If your mirror has brackets on the back, leave a tiny bit of the screw head protruding from the wall to give the mirror bracket something to cling to.

Step 8: Place the cover caps over the screw heads, and remember to remove any protective film from the mirror. Lastly, wipe off your new mirror with a soft cloth to eliminate dust or fingerprints.

--Article Source-https://www.articleted.com/article/577589/113434/How-to-Install-a-Bathroom-Mirror