Guide On How To Replace A Broken Window

Guide On How To Replace A Broken Window Replacing a window can be daunting. When this happens, it is easy to worry or get depressed, but depending on the extent of the damage, a repair can be simple. However, instead of hiring some professionals for window repair in Sacramento, several ways are there to fix a broken window yourself. If a window has minor damage, like a crack or a hole, you may perform some interim fixes to keep the window intact until you repair it.

However, a temporary solution won't last long, and you'll eventually need to replace the broken window with a new pane of glass. Replacing a broken window is straightforward with the right tools and preparation.

Here we have outlined simple methods to replace a broken window.

Materials Required

Take a quick turnaround on the tools you’ll need to complete the broken window replacement project: ●

Tape measure

●

Putty knife

●

Wood sealer or linseed oil

●

Dry paintbrush

●

Glazing putty

●

Glazier Points

●

Small hammer

●

Replacement glass

●

Primer and paint

●

Cloth and cleaning solution

Instructions Once you have all the materials ready, simply follow the steps below: ●

Measure the frame before purchasing the replacement glass: Get the window’s opening dimensions using a measuring tape and pen down everything. Since some windows aren’t perfectly square, make a paper template of the area if necessary. To get the glass size, subtract 1/16 inch from the measurement. Once you've determined the dimensions of the glass, have it cut.

●

Remove the glass from the window: Consider wearing safety gear to remove the glass carefully. Since working with broken window glass is dangerous, you may contact professionals for window glass replacement in Sacramento. If you insist on doing it yourself, ensure to take safety measures. Use a small hammer to make huge fragments of glass remaining in the window more manageable. Carefully keep the glass pieces in a secure container.

●

Prepare the window frame:

With your putty knife, remove old caulking and glazier points. Remove all of the residue using a dry paintbrush. Seal any raw wood with a wood sealer or linseed oil to help the wood bind with the new glazing compound if you have an old wooden frame. ●

Apply the glazing putty and install the glass: Knead the fresh glazing putty until it's soft and heated, and make long, thin strands out of it. Apply it to the window frame where the glass will be. Wiggle your replacement glass into the frame carefully and embed the glass in the glazing.

While purchasing the new replacement glass in Sacramento, ensure its accurate measurements.

To fasten the glass, place two glazing points on each side of the square (eight total per window pane). Push the glazier point into the wood with the tip of the putty knife. Place the second bead of putty on the window's top, against the frame, and over the glazing points. Now, flatten the lines with your putty knife.

●

Finishing Touches for Replacing a Broken Window: Allow at least one day for the glazing compound to cure. Then, you can paint the glazing with a similar color to the frame. After the paint has dried, use a towel and cleaning solution to wipe the glass. Now, you’re done with the task. However, if you’re satisfied with the results, you may consider replacing the whole window by hiring a reliable window company. They’ll help you choose the best windows for your house.