Carrara set flange en

EN

SETTING FLANGE

flange gaskets

Carrara, gaskets with value

Carrara believes in the modern

for the information exchange, to

SUPPLIER meaning: active subject

verify the effectiveness of the choices

that actively takes part in the value

and the efficiency of our gaskets. The

chain! A value that emerges from:

Carrara Product Range constitutes a

competence, flexibility, innovation

true combination of "supplemented

and availability, always being oriented

seal solutions" truly satisfying the

to the customer’s necessities and the

most heterogeneous seals demands.

continuous interaction with them.

With the very large PLANIFLEX® lines

Thanks to the experiences made in

of asbestos free and PLANIFLON®

the field of the seals systems for

products in PTFE, you will find in

flange, Carrara proposes a very

the

complete and eterogeneous Product

p o s s i b l e o p t i o n s o f graphite

Range of flat and metal gaskets.

products,

For the most general applications as

PLANIGRAPH

PLANIGRAPH ®

line

together ®

METALBOND

all with and

for the most severe one, enriched by

PLANIGRAPH CROSS OVER.

the technical competence acquired

At last the PLANISTEEL line offers you

through the constant relationships

all commonly used metal gaskets in

that Carrara holds with the main

the industrial plants, Spiral wounds,

Partners, such as the plant builders,

Ring Joints and Jacketed gaskets in all

the shopkeepers and the Maintainers,

kinds of steel.

®

Always ask the best.

Carrara gives you more Setting Flange

1

Carrara, a partner for the future Carrara S.p.a. is one of the most important

worldwide

packing

producer and of operating seals systems for valves operating in the western world. With quality as always, Carrara also produces flat and metal gaskets. While many other Big Players of the sector move their production activities in other areas, Carrara S.p.a.

2

invests in Italy and in the European Community, because it considers that the customers of this mature market want and will want to buy, integrated with the product, also attributes that are and will be essential prerogatives of this market. Our Competitive Strategy is to compete in the mature market assigning value to the product through a better organizational performance.

When a market becomes mature combined with the products that represent it, what orientation can assume a Player of this market?

Give us your attention: Carrara still has a lot to say!

Certainty

Efficiency

Support

In a market strongly Price Oriented,

Efficiency means to manage the

Systematically the Carrara S.p.a.’s

the risk of a progressive reduction of

production

those

t e ch n i c a l s t a ff t a k e s p a rt a t

the qualitative standards is always

correlated to the product optimizing

symposiums of the sector and is

present. The certainty to have bought

the resources in order to create value

integrated with the technical offices of

the corresponding product to

perceivable from the customer.

the End Users and planning of the

process

and

the requested qualifications is a

OEM to consolidate and to update the

customer's right and a duty of the

technical competence necessary in

Flexibility

Supplier.

order to provide support before and after sale to the customers.

Flexibility is to be able to answer the

Guarantee

customer necessity and able to

Guarantee means keeping control on

provide what is required quickly at

the productive process and those

sustainable prices, it is a priority Asset!

where the product is involved to guarantee the conformity to certify their performance.

Setting Flange

3

4

Product range If offering good

repetitive. In our

products is taken for

Product Range you

granted, we are

will find definite

pleased to be

security and quality.

www.carrara.it

PLANIGRAPH® Graphite gaskets and sheets • Planigraph® LG - LGR - LGRF • Planigraph® Metalbond • Planigraph® Cross Over

PLANIFLEX® Asbestos free gaskets and sheets • Planiflex® PF 13 • Planiflex® PF 41 - PF 41G • Planiflex® PF 63 - PF 63R - PF 64 - PF 65 • Planiflex® PF 81 - PF 81R

5

PLANIFLON® PTFE gaskets and sheets • Planiflon® B10 • Planiflon® B11 • Planiflon® E12 • Planiflon® Seal Tape

PLANISTEEL Metallic gaskets • Planisteel SW • Planisteel MJ • Planisteel MJS • Planisteel GG • Planisteel RJ

Setting Flange

Planigraph® Competitive quality Whoever manages daily graphite products, a quick glance is enough to notice the difference between two gaskets from different production, apparently equal. The CARRARA S.p.a. products are always identifiable and certified. Just by touching it you notice the intimate adhesion between graphite and steel of the reinforced product and the extreme compactness of the product in pure graphite.

Carrara offers performance, not only product.

Carrara S.p.a. products are recognizable by colour: green identifies LG/C, rose identifies LGR/C and blue identifies 6

LGRF/C. Carrara S.p.a. always thinks of performance safety and to make the maintenance work easy.

Planigraph® line includes three kinds of sheets: • LG/C

pure graphite

• LGR/C pure graphite with 316L plain reinforcement • LGRF/C pure graphite with 316L punctured reinforcement All kinds are available in the format: • 1.000 mm x 1.000 mm (40”x 40”) • 1.500 mm x 1.500 mm (60”x 60”) Thickness from 0.4 up to 5.0 mm (1/64” to 3/16”)

All Planigraph® sheets are treated with corrosion inhibitor.

Planigraph® LG The pure graphite without insertion

7

The gaskets in pure LG graphite are perfect for applications on flanged couplings at low pressure or used as a seal element with a metal support. The pure graphite has poor resistance to traction; therefore it is always advisable the use reduced thickness (by 0.4 to 1.0 mm) to obtain a perfect seal.

Graphite density Carbon Content Ash Content Material of insert Thickness of insert Compressibility Recovery Gas Permeability DIN 3535 Relaxation stress DIN 52913 Temperature “ m “ factor “ y “ factor

gr/cm3 % % AISI mm % % cm3/min N/mm2 °C psi

1.0 ≥ 98 ≤2

35 - 40 3-5 ≤ 1.2 ≥ 45 550 2.0 900

Not usable with oxidizing stream. With oxygen and air, the maximum temperature is 400°C.

Size

1.000 x 1.000 1.500 x 1.500

40” x 40” 60” x 60”

Thickness

0.4 ÷ 5.0

1/64” ÷ 3/16”

Setting Flange

Planigraph® LGR 8

The pure graphite with smooth insertion The gaskets in pure LGR graphite offer excellent performances in the applications on the Bonnet of the valves and for flanged couplings of heat exchangers.

A better resistance to the permeability can be obtained with the internal edge of the gasket. To obtain a perfect seal with this kind of gasket, the thickness use of 1.5 mm is recommended.

Graphite density Carbon Content Ash Content Material of insert Thickness of insert Compressibility Recovery Gas Permeability DIN 3535 Relaxation stress DIN 52913 Temperature “ m “ factor “ y “ factor

gr/cm3 % % AISI mm % % cm3/min N/mm2 °C psi

1.0 ≥ 98 ≤2 316L 0.05 40 - 50 10 - 15 ≤ 0.6 ≥ 45 550 2.0 900

Not usable with oxidizing stream. With oxygen and air, the maximum temperature is 400°C.

Size

1.000 x 1.000 1.500 x 1.500

40” x 40” 60” x 60”

Thickness

0.4 ÷ 5.0

1/64” ÷ 3/16”

Planigraph® LGRF The pure graphite with tanged insertion

9

The gaskets in pure LGRF graphite are the most versatile and of universal application on the flanges and flanged couplings of heat exchangers. A better resistance to the permeability can be obtained with the internal edge of the gasket. To obtain a perfect seal with this kind of gasket, the thickness use of 2 mm is recommended.

Graphite density Carbon Content Ash Content Material of insert Thickness of insert Compressibility Recovery Gas Permeability DIN 3535 Relaxation stress DIN 52913 Temperature “ m “ factor “ y “ factor

gr/cm3 % % AISI mm % % cm3/min N/mm2 °C psi

1.0 ≥ 98 ≤2 316L 0.10 35 - 45 15 - 20 ≤ 0.6 ≥ 48 550 2.0 1800

Not usable with oxidizing stream. With oxygen and air, the maximum temperature is 400°C.

Size

1.000 x 1.000 1.500 x 1.500

40” x 40” 60” x 60”

Thickness

0.4 ÷ 5.0

1/64” ÷ 3/16”

Setting Flange

ion s s i m E w o •L e • Fire Saf

Planigraph® Metalbond The protection ring

10

Planigraph® Metalbond is a Planigraph® gasket, with an inside reinforcement ring that increases the effectiveness of the seal, a solution that allows minimal spread of the fluid through the most stressed part of the gasket.

Economy and long duration The steel ring prevents the erosion of the inner edge of the seal and at the same time precludes the infiltrations between the graphite and the reinforcement sheet.

Since the graphite does not no infiltration between SS insert and gasket

minimal liquid and gaseous fugitive emissions

enter directly in contact with the fluid, the mechanical property of the seal remains

the graphite does not enter in contact with the fluid

the fluid does not produce erosion on the graphite

unchanged within the time.

A longer operating life, above drastic reduction of the liquid

and gaseous fugitive emissions, guarantees greater security and economical performance.

Low emission Test / VDI 2440 / Certificate nr I -150389

Planigraph® Compatible fluid process ACIDS boric acid bromic acid hydrochloric acid chromium sulphate acid up to 20%* hydrochloric acid hydrofluoric acid nitric acid 20-65% nitric acid up to 20% phosphoric acid up to 20% sulphuric acid up to 70%* sulphuric acid from 70 to 100%, up to 100 °C sulphurous acid ORGANIC ACIDS acetic acid acrylic acid hexachlorophenylacetic acid formic acid maleic acid monochloroacetic acid phthalic acid phenylacetic acid stearic acid sulphonic acid tartaric acid trichloroacetic acid ALKALIS ammonium solutions caustic potash caustic soda potassium hydroxide up to 400 °C sodium hydroxide up to 400 °C ALCOHOLS ethyl alcohol glycolic alcohol isopropyl alcohol methyl alcohol ALDEHYDES acetaldehyde benzaldehyde formaldehyde

OTHER ORGANIC SUBSTANCES acrylonitrile carbon disulphide dimethylsulphoxide epichlorohydrin phenol mercaptan nitrobenzene silicon siloxane thionyl chloride OTHER INORGANIC SUBSTANCES bleach hydrazine hydrogen peroxide, 85% sulphur AMMINES aniline diethylamine triethylamine ethanol KETONES acetone methyl ethyl ketone isobutyl methyl ketone ESTERS amyl ester of acetic acid ethylbuyl ester ethyl ester of acrylic acid ETHERS dioxin diethyl ether diphenyl ether methyl ethynyl ether GAS/VAPOUR air up to around 550 °C ammonia bromidric acid carbon dioxide up to around 600 °C carbon monoxide chlorine sulphur hexafluoride hydrochloric acid hydrofluoric acid nitrogen nitrogen dioxide nitrogen monoxide oxygen up to around 350 °C sulphidric acid sulphur dioxide steam up to 600 °C

HYDROCARBONS benzene ethylene iso-octane propane propylene styrene xylene HALOGENATED HYDROCARBONS chlorobenzene chloroform carbon tetrachloride MELTED METALS aluminium copper gold lead magnesium mercury potassium up to 350 °C silver sodium up to 350 °C tin zinc TECHNICAL MIXES diathermic oils engine oils hydraulic fluid paint thinners petrol petroleum transformer oils MELTED SALTS borate, soda, potash calcium chloride potassium hydrogen sulphate WATER-BASED SALINE SOLUTIONS borates bromide carbonate chloride chromate, 20% conc. floride iodide nitrate nitrite phosphate sulphate

The reported data comes from experiences and test. Carrara s.p.a. declines every responsibility for damages to things or persons caused by an improper or wrong use of its products.

Setting Flange

11

12

速

Planiflex

A new world of gaskets

The new range of non-asbestos sheet Planiflex® is in a sure position to satisfy all the technical requirements that can be performed from this class of gaskets. Search between the different

®

Planiflex

the friendly gasket!

models and you will find what you need! Carrara guarantees you an optimal quality of the products combined with a top certification.

Planiflex®, another step ahead to offer you more!

Part of the Planiflex ® line, are the following models: • PF 41, cellulose and rubber NBR, economic, reliable and ideal for the general applications, also available also in graphitized version PF 41G and reinforced with net, PF 41RG. • PF 65, inorganic fibres and rubber NBR, the TOP of the line, prestigious and certified, ideal for the applications on steam and hydrocarbons, also 13

available in the standard version PF 64, economy PF 63, and reinforced with net, PF 63R. • PF 81, aramidic fibres, graphite and rubber NBR, also available in the version with net PF 81R. • PF 13, special fibres and rubber CSM, used for applications with severe chemical substances.

You will find all the technical data sheets and other models of the Planiflex® line at www.carrara.it.

Setting Flange

Planiflex® PF 65 The excellence 14

PF 65 is a material with an excellent parameter of relaxation stress and perfect for steam applications.

Usable with oils, gas, fuels and inorganic acids.

Certified Germanischer Llyod, BS 7531Grade X.

composition • Inorganic Fibres • NBR Compressibility ASTM F 36/J Recovery ASTM F 36/J Tensile strength DIN 52910 Stress resistance DIN 52913 16 h, 300 °C, 50 N/mm2 16 h, 175 °C, 50 N/mm2 GAS permeability DIN 3535/6

%

8

%

50

N/mm2 - Fb/inch

8

N/mm2 - Fb/inch N/mm2 - Fb/inch

30 35

ml/mm2

0.08

Thickness increase acc.to ASTM F 146 ASTM oil no. 3, 5 h, 150 °C ASTM Fuel B, 5 h, 23 °C HNO3 50%, 1 h, 65 °C H2SO4 65%, 48 h, 23 °C Max. operating conditions Peak temperature * Continuous temperature - With steam * Pressure PxT

% % % %

8 8

°C/°F °C/°F °C/°F bar/psi bar x T °C

440 / 824 350 / 662 250 / 482 100 / 1450 10000

Typical values for a thickness of 2 mm.

Tolerance: Thickness 0.10 ÷ 0.25 mm; Length ± 50.0 mm; Width ± 50.0 mm. Surface treatment: standard sheets have anti-stick coating. * Temperature and pressure represent maximum values and they should not be used simultaneously. ** Ask P x T to CARRARA technical office.

Size

1.500 x 1.500 3.000 x 1.500 4.500 x 1.500

60” x 60” 120” x 60” 180” x 60”

Thickness

0.4 ÷ 5.0

1/64” ÷ 3/16”

Planiflex® PF 64 The versatility

15

PF 64 is a material with an excellent certification level.

Usable with oils, gas, fuel and inorganic acids.

Certified DWGW, KTW, WRc, BAM, HTB, SVGW, Germanischer Llyod, BS 7531 Grade Y.

composition • Aramidic fibres • NBR Compressibility ASTM F 36/J Recovery ASTM F 36/J Tensile strength DIN 52910 Stress resistance DIN 52913 16 h, 300 °C, 50 N/mm2 16 h, 175 °C, 50 N/mm2 GAS permeability DIN 3535/6

%

8

%

55

N/mm2 - Fb/inch

11

N/mm2 - Fb/inch N/mm2 - Fb/inch

22 28

ml/mm2

0.05

Thickness increase acc.to ASTM F 146 ASTM oil no. 3, 5 h, 150 °C ASTM Fuel B, 5 h, 23 °C HNO3 50%, 1 h, 65 °C H2SO4 65%, 48 h, 23 °C Max. operating conditions Peak temperature * Continuous temperature - With steam * Pressure PxT

% % % %

5 5

°C/°F °C/°F °C/°F bar/psi bar x T °C

400 / 732 250 / 482 200 / 392 100 / 1450 10000

Typical values for a thickness of 2 mm.

Tolerance: Thickness 0.10 ÷ 0.25 mm; Length ± 50.0 mm; Width ± 50.0 mm. Surface treatment: standard sheets have anti-stick coating. * Temperature and pressure represent maximum values and they should not be used simultaneously. ** Ask P x T to CARRARA technical office.

Size

1.500 x 1.500 3.000 x 1.500 4.500 x 1.500

60” x 60” 120” x 60” 180” x 60”

Thickness

0.4 ÷ 5.0

1/64” ÷ 3/16”

Setting Flange

Planiflex® PF 81 The energy

16

PF 81 is an excellent material with optimal thermal and chemical properties, resistant to steam, oils, gas, fuels, alkalis and weak acids. Certified BAM.

composition • Aramidic and carbon fibres • NBR Compressibility ASTM F 36/J Recovery ASTM F 36/J Tensile strength DIN 52910 Stress resistance DIN 52913 16 h, 300 °C, 50 N/mm2 16 h, 175 °C, 50 N/mm2 GAS permeability DIN 3535/6

%

7

%

50

N/mm2 - Fb/inch

9

N/mm2 - Fb/inch N/mm2 - Fb/inch

25 30

ml/mm2

0.08

Thickness increase acc.to ASTM F 146 ASTM oil no. 3, 5 h, 150 °C ASTM Fuel B, 5 h, 23 °C HNO3 50%, 1 h, 65 °C H2SO4 65%, 48 h, 23 °C Max. operating conditions Peak temperature * Continuous temperature - With steam * Pressure PxT

% % % %

5 8

°C/°F °C/°F °C/°F bar/psi bar x T °C

400 / 732 280 / 536 250 / 482 100 / 1450 10000

Typical values for a thickness of 2 mm.

Tolerance: Thickness 0.10 ÷ 0.25 mm; Length ± 50.0 mm; Width ± 50.0 mm. Surface treatment: standard sheets have anti-stick coating. * Temperature and pressure represent maximum values and they should not be used simultaneously. ** Ask P x T to CARRARA technical office.

Size

1.500 x 1.500 3.000 x 1.500 4.500 x 1.500

60” x 60” 120” x 60” 180” x 60”

Thickness

0.4 ÷ 5.0

1/64” ÷ 3/16”

Planiflex® PF 13 The aggressiveness

17

PF 13 is a material with an excellent chemical resistance and usable with different substances, with very aggressive alkalis and acids. Certified BAM.

composition • Aramidic fibres • CSM Compressibility ASTM F 36/J Recovery ASTM F 36/J Tensile strength DIN 52910 Stress resistance DIN 52913 16 h, 300 °C, 50 N/mm2 16 h, 175 °C, 50 N/mm2 GAS permeability DIN 3535/6

%

8

%

45

N/mm2 - Fb/inch

10

N/mm2 - Fb/inch N/mm2 - Fb/inch

25

ml/mm2

0.06

Thickness increase acc.to ASTM F 146 ASTM oil no. 3, 5 h, 150 °C ASTM Fuel B, 5 h, 23 °C HNO3 50%, 1 h, 65 °C H2SO4 65%, 48 h, 23 °C Max. operating conditions Peak temperature * Continuous temperature - With steam * Pressure PxT

% % % % °C/°F °C/°F °C/°F bar/psi bar x T °C

10 8 200 / 392 150 / 300 60 / 870 5000

Typical values for a thickness of 2 mm.

Tolerance: Thickness 0.10 ÷ 0.25 mm; Length ± 50.0 mm; Width ± 50.0 mm. Surface treatment: standard sheets have anti-stick coating. * Temperature and pressure represent maximum values and they should not be used simultaneously. ** Ask P x T to CARRARA technical office.

Size

1.500 x 1.500 3.000 x 1.500 4.500 x 1.500

60” x 60” 120” x 60” 180” x 60”

Thickness

0.4 ÷ 5.0

1/64” ÷ 3/16”

Setting Flange

Planiflex® PF 41 The economy

18

PF 41 is the common material for general applications.

Economic, secure, tested.

Certified Germanischer Llyod.

composition • Organic fibres • NBR Compressibility ASTM F 36/J Recovery ASTM F 36/J Tensile strength DIN 52910 Stress resistance DIN 52913 16 h, 300 °C, 50 N/mm2 16 h, 175 °C, 50 N/mm2 GAS permeability DIN 3535/6

%

8

%

50

N/mm2 - Fb/inch

7

N/mm2 - Fb/inch N/mm2 - Fb/inch

20

ml/mm2

0.08

Thickness increase acc.to ASTM F 146 ASTM oil no. 3, 5 h, 150 °C ASTM Fuel B, 5 h, 23 °C HNO3 50%, 1 h, 65 °C H2SO4 65%, 48 h, 23 °C Max. operating conditions Peak temperature * Continuous temperature - With steam * Pressure PxT

% % % %

10 10

°C/°F °C/°F °C/°F bar/psi bar x T °C

180 / 360 140 / 284 120 / 248 40 / 600 5000

Typical values for a thickness of 2 mm.

Tolerance: Thickness 0.10 ÷ 0.25 mm; Length ± 50.0 mm; Width ± 50.0 mm. Surface treatment: standard sheets have anti-stick coating. * Temperature and pressure represent maximum values and they should not be used simultaneously. ** Ask P x T to CARRARA technical office.

Size

1.500 x 1.500 3.000 x 1.500 4.500 x 1.500

60” x 60” 120” x 60” 180” x 60”

Thickness

0.4 ÷ 5.0

1/64” ÷ 3/16”

Planiflex速 Chemical Compatibility Process fluids

PF 65 PF 64

PF 81

PF 13

PF63 PF41 PF 81R PF 63R PF 41G

Acetamide Acetic acid 10% Acetic acid 100% Acetic ester Acetone Acetylene Adipic acid Air Alum Aluminium acetate Aluminium chlorate Aluminium chloride Ammonia Ammonium bicarbonate Ammonium chloride Ammonium hydroxide Amyl acetate Aniline Asphalt Barium chloride Benzene Benoic acid Boric acid Borax Butane Butyl alcohol Butyric acid Calcium chloride Calcium hydroxide Carbon disulphide Carbon dioxide Chloroform Chloryne, dry Chloryne, wet Chromic acid Citric acid Copper acetate Creosote Cresol Cyclohexanol Cycloexanone Decaline Dibenzyl ether Dimethyl formamide Dowtherm Ethane Ethyl acetate Ethyl alcohol Ethyl chloride Ethylene Ethylene glycol Formic acid 10% Formic acid 85% Formaldehyde Freon 12 Freon 22 Fuel oil Gasoline Glycerine Heptane Hydraulic oil (mineral) Hydraulic oil (Phosphate ester type) Hydraulic (Glycol based) Hydrazine Hydrochloric acid 20% Hydrochloric acid 36% Hydrofluoric acid 10% Hydrofluoric acid 40%

Process fluids

PF 65 PF 64 PF 81

PF 13

PF63 PF41 PF 81R PF 63R PF 41G

Hydrogen Isobutane Isooctane Isopropyl alcohol Kerosene Lead acetate Lead arsenate Magnesium sulphate Mallic acid Methane Methanol Methyl chloride Methylene dichloride Methyl ethyl ketone Milk Mineral oil type ASTM no. 1 Naphtha Nitric acid 20% Nitric acid 40% Nitric acid 96% Nitrobenzene Nitrogen Octane Oleic acid Oleum Oxalic acid Oxygen Palmitic acid Pentane Perchloroethylene Phenol Phosphoric acid Potassium acetate Potassium bicarbonate Potassium carbonate Potassium chloride Potassium dichromate Potassium hydroxide Potassium iodide Potassium nitrate Potassium permanganate Propane Pyridine Salycilic acid Silicon oil Soap Sodium aluminate Sodiem bicarbonate Sodium bisulphite Sodium carbonate Sodium chloride Sodium cyanide Sodium hydroxide Sodium sulphate Sodium sulphide Starch Steam Stearic acid Sugar Sulphuric acid 20% Sulphuric acid 96% Tar Tartaric acid Toluene Transformer oil Trichlorethylene Water White Spirit Xylene

Recommended

19

Recommendation depends on operating conditions

Not recommended

Setting Flange

Planiflon® 20

The PTFE Planiflon® product line becomes rich of new m o d e l s i n o r d e r t o b e tt e r s a t i s f y t h e t e ch n i c a l requirements of the customers. Search between the different products and you will find your solution!

Planiflon® a step ahead in order not to remain behind!

Part of the Planiflon® line, are the following models: • Planiflon® SEAL TAPE SC, the adhesive tape in expanded PTFE • Planiflon® B 10, PTFE with special fillers • Planiflon® B 11, modified PTFE • Planiflon® E 12, expanded PTFE You will find all the technical data sheets and other models of the Planiflon® line at www.carrara.it.

The PTFE that renews!

n o i s s i m E • Low

Planiflon® B10 The elasticity 21

Planiflon® B10 is a PTFE with special fillers whose elasticity will astonish you. A unique product in its kind, secure and easy to cut, LONG LIFE, that guarantees great elasticity also in presence of thermal gradients and oscillating loads. Certified BAM.

composition • Pure virgin PTFE • Loaded with complex inorganic fillers.

Specific weight Hardness Temperature work Compressibility Recovery Stress retention Creep deformation

Testing Method ASTM D792 ASTM D2240 ASTM F36A ASTM F36A DIN 52913 ASTM F38

Gauge Gr / cm3 Shore D °C % % N/mm2 %

Value 2.2 - 2.3 90 - 98 -200 / +260 10 40 30 18

Size

1.200 x 1.200 1.500 x 1.500

48” x 48” 60” x 60”

Thickness

0.80 ÷ 3.20

1/32” ÷ 1/8”

Low emission Test / VDI 2440 / Certificate nr I -109007

Setting Flange

Planiflon® B11 The security 22

Planiflon® B11 is a modified PTFE with special fillers.

A High Tech product unique in its kind that guarantees great resistance to the deformation in the long period and the elasticity also in presence of thermal gradient and oscillating loads. Certified BAM.

composition • Pure modified PTFE • Loaded with complex inorganic fillers.

Specific weight Hardness Temperature work Compressibility Recovery Stress retention Creep deformation

Testing Method ASTM D792 ASTM D2240 ASTM F36A ASTM F36A DIN 52913 ASTM F38

Gauge Gr / cm3 Shore D °C % % N/mm2 %

Value 2.2 - 2.3 100 - 110 -200 / +260 10 40 30 11

Size

1.200 x 1.200 1.500 x 1.500

48” x 48” 60” x 60”

Thickness

0.80 ÷ 3.20

1/32” ÷ 1/8”

Planiflon® E12 The softness 23

Planiflon ® E12 is an expanded PTFE. An excellent product, very soft and elastic wich is ideal for applications on fiberglass flange for the low torque load required.

Certified FDA - BAM.

composition • Pure expanded PTFE

Specific weight Hardness Temperature work Compressibility Recovery Stress retention Creep deformation

Testing Method ASTM D1457 ASTM D2240 ASTM F36A ASTM F36A DIN 52913 ASTM F38

Gauge Gr / cm3 Shore D °C % % N/mm2 %

Value 0,8 50 - 60 -200 / +260 45 14 30 5

Size

1.500 x 1.500

60” x 60”

Thickness

1.5 ÷ 3.00

1/16” ÷ 1/8”

Setting Flange

Planisteel SW Elasticity and the security: Planisteel SW! The spiral wounds product range Planisteel SW includes all types of gaskets for seal on the flanged coupling of any kind. The gaskets are realized in the dimensions and steels previewed from the regulations or in those request from the industrial applications, from the most common to the special ones.

The spiral wound is a gasket that must answer to the requirement of compressibility and elasticity in order to guarantee the seal. Therefore, Carrara S.P.A. produces spiral wounds on modern machinery with controlled winding tension, in order to always offer an answering product to the technical detailed lists of the regulations.

Thanks to the versatile of its own plants, we are able to assure fast deliveries and also for series of limited quantities. Above that we offer consulting and technical

24

support that only a constant effort of a strongly motivated teamwork can express.

S1

SW d6

S2

d7

S1

SW/I d5

d6

4,5

+0,3 -0

d7

d3

+0,25

3,2 -0,05

3,2 +0,25 -0,05

SWC/I

d4

d3

d2

d1

n o i s s i m E w • Lo e • Fire Saf Low emission Test / VDI 2440 Certificates I /108988 - I /109664

Winding materials

d1

d2

+0,3 -0

d4

4,5

3,2 +0,25 -0,05

SW/C

Try the difference, try Planisteel SW!

ASTM AISI 304 AISI 316 AISI 321 AISI 316 Ti Monel (NiCu30Fe)

DIN Material No. 1.4301 1.4401 1.4541 1.4571 2.4360

Centring ring Bolt and bolt hole 0.175” thick

0.117” 0.131” thick

Inner-ring inside diameter d1 Gasket inside diameter d2 Gasket outside diameter d3 Centering-ring outside diameter d4

ASME B 16,20 inch 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4 5 6 8 10 12 14 16 18 20 24

d1 150-300 14,2 20,6 26,9 38,1 44,5 55,6 66,5 81,0 106,4 131,8 157,2 215,9 268,2 317,5 349,3 400,1 449,3 423,9 603,3

400-600 14,2 20,6 26,9 38,1 44,5 55,6 66,5 78,7 102,6 128,3 154,9 205,7 255,3 307,3 342,9 389,9 438,2 489,0 590,6

900 14,2 20,6 26,9 33,3 41,4 52,3 63,5 78,7 102,6 128,3 154,9 196,9 246,1 292,1 320,8 374,7 425,5 482,6 590,6

d2 1500 14,2 20,6 26,9 33,3 41,4 52,3 63,5 78,7 97,8 124,5 147,3 196,9 246,1 292,1 320,8 368,3 425,5 476,3 577,9

2500 14,2 20,6 26,9 33,3 41,4 52,3 63,5 78,7 97,8 124,5 147,3 196,9 246,1 292,1

150-300 19,1 25,4 31,8 47,8 54,1 69,9 82,6 101,6 127,0 155,7 182,6 233,4 287,3 339,9 371,6 422,4 474,7 525,5 628,7

400-600 19,1 25,4 31,8 47,8 54,1 69,9 82,6 101,6 120,7 147,6 174,8 225,6 274,6 327,2 362,0 412,8 469,9 520,7 628,7

d3

900 19,1 25,4 31,8 39,6 47,8 58,7 69,9 95,3 120,7 147,6 174,8 222,3 276,4 323,9 355,6 412,8 463,6 520,7 628,7

1500 19,1 25,4 31,8 39,6 47,8 58,7 69,9 92,2 117,6 143,0 171,5 215,9 266,7 323,9 362,0 406,4 463,6 514,4 616,0

2500 19,1 25,4 31,8 39,6 47,8 58,7 69,9 92,2 117,6 143,0 171,5 215,9 270,0 317,5

150-600 31,8 39,6 47,8 60,5 69,9 85,9 98,6 120,7 149,4 177,8 209,6 263,7 317,5 374,7 406,4 463,6 527,1 577,9 685,8

d4

900-2500 31,8 39,6 47,8 60,5 69,9 85,9 98,6 120,7 149,4 177,8 209,6 257,3 311,2 368,3 400,1 457,2 520,7 571,5 679,5

150 47,8 57,2 66,8 76,2 85,9 104,9 124,0 136,7 174,8 196,9 222,3 279,4 339,9 409,7 450,9 514,4 549,4 606,6 732,8

300 54,1 66,8 73,2 82,6 95,3 111,3 130,3 149,4 181,1 215,9 251,0 308,1 362,0 422,4 485,9 539,8 596,9 654,1 774,7

400

600 54,1 66,8 73,2 82,6 95,3 111,3 130,3 149,4 193,8 241,3 266,7 320,8 400,1 457,2 492,3 565,2 612,9 682,8 790,7

177,8 212,9 247,7 304,8 358,9 419,1 482,6 536,7 593,9 647,7 768,4

900

168,4 206,5 247,7 289,1 358,9 435,1 498,6 520,7 574,8 638,3 698,5 838,2

1500 63,5 69,9 79,5 88,9 98,6 143,0 165,1 174,8 209,6 254,0 282,7 352,6 435,1 520,7 577,9 641,4 704,9 755,7 901,7

2500 69,9 76,2 85,9 104,9 117,6 146,1 168,4 196,9 235,0 279,4 317,5 387,4 476,3 549,4

ASME B 16,47 SERIES B inch 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60

d1 150 654,1 704,9 755,7 806,5 857,3 908,1 958,9 1009,7 1060,5 1111,3 1162,1 1212,9 1263,7 1314,5 1358,9 1409,7 1460,5 1511,3

300 654,1 704,9 755,7 806,5 857,3 908,1 952,5 1003,3 1054,1 1104,9 1152,7 1209,8 1244,6 1320,8 1352,6 1403,4 1447,8 1524,0

400 660,4 711,2 755,7 812,8 863,6 917,7 952,5 1000,3 1051,1 1104,9 1168,4 1206,5 1257,3 1308,1 1352,6 1403,4 1454,2 1517,7

d2 600 647,7 698,5 755,7 812,8 863,6 917,7 952,5 1009,7 1066,8 1111,3 1162,1 1219,2 1270,0 1320,8 1378,0 1428,8 1473,2 1530,4

900 660,4 711,2 768,4 812,8 863,6 920,8 1009,7 1060,5 1111,3 1155,7 1219,2 1270,0

150 673,1 723,9 774,7 825,5 876,3 927,1 977,9 1028,7 1079,5 1130,3 1181,1 1231,9 1282,7 1333,5 1384,3 1435,1 1485,9 1536,7

300 685,8 736,6 793,8 850,9 901,7 955,8 977,9 1022,4 1073,2 1130,3 1178,1 1235,2 1295,4 1346,2 1403,4 1454,2 1511,3 1562,1

400 685,8 736,6 793,8 850,9 901,7 955,8 971,6 1025,7 1076,5 1130,3 1193,8 1244,6 1295,4 1346,2 1403,4 1454,2 1505,0 1568,5

d3 600 685,8 736,6 793,8 850,9 901,7 955,8 990,6 1047,8 1104,9 1162,1 1212,9 1270,0 1320,8 1371,6 1428,8 1479,6 1536,7 1593,9

900 685,8 736,6 793,8 850,9 901,7 958,9 1035,1 1098,6 1149,4 1206,5 1270,0 1320,8

150 704,9 755,7 806,5 860,6 911,4 968,5 1019,3 1070,1 1124,0 1178,1 1228,9 1279,7 1333,5 1384,3 1435,1 1485,9 1536,7 1587,5

d4

300 736,6 787,4 844,6 901,7 952,5 1006,6 1016,0 1070,1 1120,9 1181,1 1228,9 1286,0 1346,2 1397,0 1454,2 1505,0 1562,1 1358,9

400 736,6 787,4 844,6 901,7 952,5 1006,6 1022,4 1076,5 1127,3 1181,1 1244,6 1295,4 1346,2 1397,0 1454,2 1505,0 1555,8 1619,3

600 736,6 787,4 844,6 901,7 952,5 1006,6 1041,4 1098,6 1155,7 1212,9 1263,7 1320,8 1371,6 1422,4 1479,6 1530,4 1587,5 1644,7

900 736,6 787,4 844,6 901,7 952,5 1009,7 1085,9 1149,4 1200,2 1257,3 1320,8 1371,6

150 774,7 831,9 882,7 939,8 990,6 1047,8 1111,3 1162,1 1219,2 1276,4 1327,2 1384,3 1435,1 1492,3 1549,4 1606,6 1663,7 1714,5

300 835,2 898,7 952,5 1006,6 1057,4 1117,6 1054,1 1114,6 1165,4 1219,2 1273,3 1324,1 1378,0 1428,8 1492,3 1536,7 1593,9 1644,7

400 831,9 892,3 946,2 1003,3 1054,1 1117,6 1073,2 1127,3 1178,1 1231,9 1289,1 1346,2 1403,4 1454,2 1517,7 1568,5 1619,3 1682,8

600 866,9 914,4 971,6 1022,4 1073,2 1130,3 1104,9 1155,7 1219,2 1270,0 1327,2 1390,7 1447,8 1498,6 1555,8 1612,9 1663,7 1733,6

900 882,7 946,2 1009,7 1073,2 1136,7 1200,2 1200,2 1251,0 1301,8 1368,6 1435,1 1485,9

16 36 40 47 54 65 70 84 102 115 140 168 196 221 251 307 358 405 458 526 566 666

d3 25 36 40 47 54 65 70 84 102 115 140 168 196 221 251 307 358 405 458 526 566 666

40 36 40 47 54 65 70 84 102 115 140 168 196 221 251 307 358 405 458 526 566 666

64 36 40 47 54 65 70 84 104 119 144 172 200 227 257 315 366 413 466 551 574 674

10 46 51 61 71 82 92 107 127 142 162 192 217 247 272 327 377 437 488 558 593 695

16 46 51 61 71 82 92 107 127 142 162 192 217 247 272 328 383 443 495 567 617 734

d4 25 46 51 61 71 82 92 107 127 142 168 194 224 254 284 340 400 457 514 574 624 731

40 46 51 61 71 82 92 107 127 142 168 194 224 265 290 352 417 474 546 578 628 747

64 56 61 72 82 90 103 113 137 148 174 210 247 277 309 364 424 486 543 534 657 764

UNI EN 1514/1 DN 10 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300 350 400 450 500 600

10 18 22 27 34 43 48 57 73 86 108 134 162 183 213 267 318 363 414 460 518 618

16 18 22 27 34 43 48 57 73 86 108 134 162 183 213 267 318 363 414 460 518 618

d1 25 18 22 27 34 43 48 57 73 86 108 134 162 183 213 267 318 363 414 460 518 618

40 18 22 27 34 43 48 57 73 86 108 134 162 183 213 267 318 363 414 460 518 618

64 18 22 27 34 43 48 57 73 86 108 134 162 183 213 267 318 363 414 460 518 618

10 24 28 33 40 49 54 66 82 95 120 146 174 195 225 279 330 375 426 478 530 630

16 24 28 33 40 49 54 66 82 95 120 146 174 195 225 279 330 375 426 478 530 630

d2 25 24 28 33 40 49 54 66 82 95 120 146 174 195 225 279 330 375 426 478 530 630

40 24 28 33 40 49 54 66 82 95 120 146 174 195 225 279 330 375 426 478 530 630

64 24 28 33 40 49 54 66 82 95 120 146 174 195 225 279 330 375 426 478 530 630

10 36 40 47 54 65 70 84 102 115 140 168 196 221 251 307 358 405 458 526 566 666

Setting Flange

25

26

Materials Materials Low Carbon Steel Stainless steel Stainless steel Stainless steel Stainless steel Monel (NiCu30Fe) Copper Brass Aluminium

ASTM Soft iron AISI 304 AISI 316 AISI 321 AISI 316 Ti B172, alloy 400 Copper Brass Ms 63 Aluminium 99.5

PLANISTEEL gaskets are available in all metals and inserts.

M&J gaskets factors DIN material number 1.1003 1.4301 1.4401 1.4541 1.4571 2.4360 2.0090 2.0321 3.0255

Gaskets

PLANISTEEL MJ

PLANISTEEL MJS

PLANISTEEL GG

Material stainless steel 4%-6%& chrome soft iron copper or brass monel aluminium all stainless steel 4%-6%& chrome soft iron copper or brass monel aluminium

m 2,75 2,75 2,75 2,50 2,50 2,25 3,00 3,75 3,75 3,75 3,50 3,75 3,25

y (psi) 9.000 9.000 7.600 6.500 8.000 5.500 10.000 11.000 9.000 7.600 6.500 7.600 5.500

Planisteel MJ - MJS - GG Carrara S.P.A. realizes jacketed Planisteel gaskets

in all

materials and inserts for piping and heat exchanger applications, in the following versions:

Planisteel MJ

Planisteel MJS

MJ 00

MJS 10

MJ 10 MJS 20

MJ 12 MJ 14

MJS 30 MJ 16

27

MJ 18

PLANISTEEL SIZE CODES

MJ 19 MJ 22

Planisteel GG GG 10

GG 20 GG 30

C1

C9

C17

C2

C10

C18

C3

C11

C19

C4

C12

C20

C5

C13

C21

C6

C14

C22

C7

C15

C23

C8

C16

C24

Setting Flange

28

Planisteel RJ Style R Ring Joints Planisteel RJ, are produced in compliance to the standards API 6A and ASME B16.20 for applications at elevated temperature and pressure. The surfaces of contact between the gasket and the flange must be shaped with particular attention in order to guarantee the maximum performance of the gasket. Thanks to our modern equipments and the particular cure dedicated in

Style RX

the production, we succeed to guarantee superficial hardness and tolerances truly perfect.

The Ring Joints Planisteel RJ gaskets are available in all stainless steels and in all alloy.

Style BX 29

Standard materials Style SRX

According to ASME B16.20 ASTM Soft Iron Low CS 4-6 Cr 1/2 Mo AISI 410 AISI 304 AISI 316 AISI 347

DIN No 1.1003 1.0038 1.7362 1.4000 1.4301 1.4401 1.4550

Max HV 56 78 72 86 83 83 83

Max HB 90 120 130 170 160 160 160

Material Code D F F5 S 410 S 304 S 316 S 347

Style SBX

References Style IX

RJ style

Gaskets

R

ASME B16.20 - API 6A

RX BX

ASME B16.20 - API 6A API 6A

Flanges ASME B16.5 ANSI B16.47 series A API 6B API 6BX

Setting Flange

Planisteel RJ ASME B 16.20

150

300

600

1/2

1/2

900

ASME B 16.47A

1500

2500

3/600

900

API 6B

2000

3000

WEIGHT Kg

5000

1/2 3/4

3/4

1/2 3/4

1

Oval

Octagonal

R11

0,05

0,05

R12

0,10

0,10

R13

0,10

0,10

R14

0,11

0,11

R15

0,12

0,12

0,12

0,11 0,13

1

1

1

3/4

1

1

1

R16 R17

0,14

1.1/4

1.1/4

1.1/4

1

1 1/4

1 1/4

1 1/4

R18

0,15

0,14

R19

0,16

0,15

R20

0,17

0,15 0,29

1.1/4 1.1/2 1.1/2

1.1/2

1 1/2

1.1/2

1 1/2

1 1/2

1.1/4 2 2

2

2

1.1/2

2

2

2

2.1/2 2.1/2

2.1/2

2 1/2

2

2 1/2

2.1/2

2 1/2

2.1/2 3 3

30

R

3

3

3

3

3 3 1/2 3 1/2

3 1/2 3

3 4

4

4

4

5

5

5

6

6

8

8

10

12 12

12

12

12

12

12

12

0,57

0,55

0,28

0,26

R30

0,48

0,47

R31

0,51

0,50

R32

0,65

0,63

R33

0,32

0,30

R34

0,54

0,52

1,16

1,14 0,65

R40

0,42

0,39

R41

0,75

0,73

R42

1,91

1,88

R43

0,48

0,44

5

R44

0,80

0,78

R45

0,87

0,85

6

R46

1,08

1,05

R47

2,29

2,26

R48

0,61

0,56

10 10

R28 R29

0,67

10

10

0,43

R38

8

10

0,45

R39

10 10

0,41

R27

4

8 10

0,42

0,60

8

8

0,23

R26

0,34

8 8

0,38

0,25

0,62

6 8

0,39

R37

6

6

R24 R25

3 1/2

5

6

0,33

0,55

6 6

0,34

0,37

5

5

0,19

R23

0,56

5 5

0,20

R35

4 4

0,30

R36

4 4

R21 R22

R49

1,11

1,09

R50

1,99

1,95

R51

3,65

3,69

R52

0,75

0,69

R53

1,34

1,30

R54

2,39

2,35

R55

7,35

7,68

R56

0,93

0,87

R57

1,57

1,53

ASME B 16.20

150

300

600

900

ASME B 16.47A

1500

2500

3/600

900

API 6B

2000

3000

WEIGHT Kg

5000

12 14 12 14

14

14

14

14

14

14 14 16 16

16

16

16 16

16

16

16 18 18

18

18

18 18

18

18

18 20

20 20

20

20

20 20

20

20

24 24

24

24

24

24 24 22 22

R

Oval

Octagonal

R58

4,98

5,03

R59

0,98

0,90

R60

10,47

11,09

R61

1,73

1,69

R62

3,09

3,04

R63

7,33

7,54

R64

1,12

1,03

R65

1,94

1,89

R66

3,47

3,40

R67

10,07

10,53

R68

1,28

1,18

R69

2,20

2,15

R70

5,35

5,27

R71

11,43

11,95

R72

1,38

1,27

R73

2,99

2,92

R74

5,85

5,77

R75

15,05

15,94

R76

1,66

1,53

R77

5,11

5,01

R78

12,10

12,46

R79

22,58

22,06

R80

1,40

R81

3,86

1

R82

0,23

1 1/2

R84

0,25

2

R85

0,40

2 1/2

R86

0,65

3

R87

0,72

4

R88

1,22

3 1/2

R89

1,13

5

R90

2,05

10

R91 R92

7,10 0,94

0,92

26

R93

28

R94

7,90

30

R95

8,47

32

R96

12,08

34

R97

12,75

36

R98

13,51

R99

0,95

8

8

7,40

26

R100

16,79

28

R101

21,83

30

R102

23,39

32

R103

24,95

34

R104

31,49

36

R105

33,35

Setting Flange

31

Easy Cutter: your gasket maker Easy cutter is the maintenance tool to produce FLAT GASKETS easily and quickly. Easy Cutter will become your indispensable tool to manipulate the small emergencies when the gasket are needed immediately.

32

Carrara S.P.A. has in its product range an extensive spectrum of graphite packings in order to satisfy every type of technical requirement.

Carrara S.P.A. also exposes a vast variety of other products.

All technical data sheets of the packings and for the other Carrara S.P.A. products are in

www.carrara.it Request the password and you will be able to access information and services of great usefulness for your job.

The reported data in the technical data sheet, are the test results executed in the Carrara S.P.A. laboratories, from tests executed by third party laboratories and from experience by the use of the products in the industrial applications. The correct product selection and its correct installation constitute decisive factor for the functionality of the product itself. Carrara S.P.A. declines every responsibility for damages to things or persons, caused by an improper use, from wrong use or from use in not optimal configuration of the products. Carrara S.P.A. reserves them selves to change the reported technical data without obligation of communication to third party.

Setti ng F lange

www.carrara.it valve sealing

FERP

SETTING FLANGE

metallic gaskets for flange

FERP

SETTING FLANGE

FERP

flat gaskets for flange

Flat Gaskets for Flange

Planisteel Spiral Wound Gaskets, Kamprofile and Ring Joints according to all International standard or customized on demand.

Planigraph, Planiflon and Planiflex gasketing sheets and flat gaskets for all applications.

SETTING MECHANICAL SEALS

FERP

mechanical seals

INSULATING KIT

flange protection

FERP

VALVE SEALING & COMPONENTS

valgasket division

FERP

EN

Metallic Flange Gaskets

FE approved graphite stem sealing, special graphite seat sealing and huge range of engineered graphite seals for valves.

EN

Valve Graphite Sealing

Huge and qualified range of braided packings covered by API 622, ISO 15848, BAM and FDA for any industrial applications.

EN

Braided Packings

FERP

FERP

environmental division

Mechanical seals

Insulating Kit

Valve Components

FERP Envir. Division

Single Stationary Multiple Spring Cartridge and High Temperature Metal Bellows Single Cartridge are the main product of our range.

Flange insulation kits for cathodic protection are one of our specialties.

Metallic Seat soft inserted and metal to metal for Ball and Gate Valves , Kit «ball and seat» equipped with all soft parts.

LDAR and Smart LDAR, Tanks Survey, Steam System Assessment and 3D Environmental Consulting.

CARRARA SpA via Provinciale, 1/E - 25030 ADRO (Bs) Italy - Tel. +39 030 7451129 / 7457821 - Fax +39 030 7453238 / 7457829 info@carrara.it - www.carrara.it

SETTING FLANGE - EN - 01-16

SETTING VALVE

EN

FERP

EN

EN

EN

SETTING COMPRESSION PACKINGS

packings for valves and pumps

EN

Text and pictures of this catalogue are Carrara properties. The reproduction, also partial, for improper divulgation is forbidden.

FERP