ISG Catalogue | September - November 2022

PERSONAL PROTECTIVE EQUIPMENT

LIFTING & MATERIAL HANDLING

MACHINERY & EQUIPMENT

LUBRICATION EQUIPMENT

AIR TOOLS & EQUIPMENT

POWER TOOLS

Industrial Supply Group supplies quality industrial products to all facets of Australian industry. Supported by major industrial manufacturers of power tools, hand tools, abrasives, and safety products.

ISG is a coalition of major independent industrial supply companies servicing customers Australia wide with the proven capacity to service national accounts.

Supporting Australian Business with Local Knowledge and National Buying Power

Part of the Stealth Global Holdings Group of Companies (ASX:SGI)

FENCE BARS

• Used for digging holes, breaking up clay and cutting through tree roots

• Finely ground and sharpened chisel end

• Fence bar knobs are forged, not welded, and made to optimum size for tamping and packing soil

UTILITY WRECKING BAR

• Used for construction and carpentry work such as door fitting

• Finely ground wide ends reduce damage to timbers when removing for restoration work

GRIZZLY (PRY) BAR

WRECKING BAR 450 X 16MM - HEXAGON

• Used for construction, demolition and wrecking work

• Finely ground and sharpened ends make demolition work easier and more efficient

• Open bend to get behind larger timbers

• Grooved claw for nail pulling

• Efficient blade angle and 55-1/2’’ (1410 mm) total length provide high leverage as a crow bar, and a nail and spike puller, even in awkward positions

• The 3’’ (7.6 cm) width protects concrete when stripping forms

6 PIECE SET

• Combination set of commonly used punches, drifts and chisels

• Ideal apprentice or workshop starter kit

Cra ed Tough Since 1936

LONG PIN PUNCH

8 PIECE SET

• Used to drive out pre-loosened pins where additional length is needed

• Tough and resilient pin shaft

• Set Components: 2.5mm, 3mm, 4mm, 5mm, 6mm, 6.5mm, 8mm, 10mm 4PPLSET8

PIN

• Small and lightweight hammer is great for general building and

•

• Suitable for use in non-sparking environments

• Copper heads are softer than brass and reduce damage to threads

• Hammer heads are pinned through the steel core of the fibreglass handle for added safety

handle

• Steel core is immersed in glue, with the pin in a blind hole to avoid sparking

2KG

• Head is forged then normalised for a softer face (below 20HRC)

PINNED FIBREGLASS HANDLE

• Perfect for demoliton work, breaking through drywall and masonry walls

• Also used for dislodging items and breaking up concrete

• Hardened and tempered faces for durability and longevity

• Hammer heads are pinned through the steel core of the fibreglass handle for added safety

• Hammer head is pinned through the steel core of the fibreglass handle for added safety

SCAFFOLD

• Dual-purpose tool used for scaffold assembly

• Forged and heat treated for maximum strength

• Correctly balanced for comfort and ease of use

• Knurled handle for greater grip and control

5HSC

SLEDGE HAMMER WITH HARDWOOD HANDLE

• A well balanced versatile sledge hammer for building, construction and demolition work

• Hardened and tempered faces for durability and longevity

• Hammer heads are secured to an Australian hardwood handle

WELDING HAMMERS

• Used for chipping off slag and spatter around welds, especially in holes and difficult corners

• Also suitable for peening welds of hard facing cast iron

• Finely pointed ends allow access to hard to reach spaces

• Welded to the handle at the right point for proper balance

• Rubber grip handle for comfort and insulation from radiant heat whilst welding

NORMALISED SLEDGE HAMMER NUPLA HANDLE

• Head is forged from tough carbon manganese steel, then normalised to give a softer face that is less likely to chip

• Fitted with quality made Nupla Fibreglass handle

NORMALISED

•

STAR DROPPER REMOVER

• Used for removing star droppers, star pickets or fencing droppers, selected pipes and steel pegs

• Gripper bites efficiently into the dropper for easy extraction without slipping

• G shaped grasp is designed to offer greater mobility during set up

• Long handle for excellent leverage

• Will remove star droppers from 600mm in length

•

•

8KG STAR DROPPER HAMMER

• Used for driving in star droppers, star pickets or fencing droppers, marker pegs, stakes and concreting stakes

• Heavy 8kg unit drives droppers very quickly and efficiently with little resistance

• Handle and slug are welded together and not to the pipe for strength

• Drives droppers quietly with a solid blow

• Slides 710mm down the dropper 5SDSH

4LB DEMOLITION HAMMER FIBREGLASS HANDLE

GYMPIE (DRILL) HAMMER

HAMMER

14LB COPPER HAMMERS

CLAW HAMMER - YELLOW

Stainless Steel Taper Gauges

Stainless Steel Rules

Double Sided Metric & Imperial

Engineering Squares

● Metric on front and imperial on back

● Graduations on both upper and lower edges with numerical markings in centre

● One square end and one rounded end with hanging hole

Sliding Bevel

Professional sliding bevel to draw or scribe precise angles on most at surfaces

●

DEFLECTING BEAM TORQUE WRENCHES MADE IN AUSTRALIA

Deflecting beam torque wrenches work by applying torque to a deflecting beam rather than a coil spring. With no wearing parts, the unique design ensures accuracy of +/- 2% throughout the range of the wrench.

The torque setting can easily be set via a sliding scale which displays the torque units. The dual signal feature allows the users to see, feel, and hear when the selected torque has been reached. When working in a noisy environment the operator can see the signal mechanism release without relying solely on an audible notification.

• Deflecting beam mechanism (no spring)

• Dual signal (see and hear when the wrench has reached the selected torque)

• Torque units displayed in ft.lbs, Nm & kg-cm

• Left & right-hand operation

• Rigidity - all steel construction (Made in Australia)

• Repeatability - accurate to +/-2%

• Durability - no wearing parts

• Meets or exceeds international standards

• Certificate of calibration can be provided on request

• Lifetime warranty on deflection bar

Professional Measuring Instruments

Dual Scale Vernier Caliper

• Meet DIN862

• Made of stainless steel

Combination Protractors

• Buttons: On/Off, Hold, Zero

• Locking knob

• Auto power off

Rule Graduations: 1mm & 1/32”

Angular Resolution: 0.1°

Graduation: 0.02 mm/0.001’’

Accuracy: ±0.03 mm

• Functions: zero point, mm/inch

• USB data output

• Made of stainless steel

Resolution: 0.01 mm

Accuracy: ±0.03 mm

Graduation: 0.01 mm

Accuracy: 35 µm

• Limit Hands

• 1 mm Range per revolution

Graduation: 0.001”

Accuracy: 0.004”

• Limit Hands

• 1 mm Range per revolution

Height: 231 mm

Arm length: 155 mm

Magnetic Force: 60 kgf

Height: 228 mm

Magnetic Force: 40 kgf

Annular Cutters

Industrial quality cutting solution for use with magnetic base drilling machines. Suitable for cutting steel, stainless steel and other ferrous metals along with aluminium and other non-ferrous metals.

5 Pce Carbide Burr Set

B900 SCB5

• Cylindrical (square), Cylindrical (radius), Ball, Tree (radius), Cylindrical (radius Al-cut)

• 1/4" shank

Die Grinder Kit

B902 0002

• Pneumatic Die Grinder

• Die Grinder Collets: 1/8", 1/4", 3 & 6mm

• 2 × Wrenches

6 Pce Ratchet Action Pipe

Threading Kit - Metric M455 0001

• Die sizes: 16 x 1.5mm,

6 Pce Needle File Set

M305 M020

• Pillar, half round, warding, three square, square, round x160mm

10 Pk Extra-Close Blades + BONUS Mango ll Handle

SH25500179

• Cobalt blades for longer blade life and great on stainless steel

2 Pce Griplock® Tongue & Groove Pliers Set

GLS-1

• GL10 (241.30mm)

• GL12 (317.50mm)

2 Pce SelfAdjusting Pliers Set L292 0001

• 175mm

•

2 Pce SelfAdjusting Pliers Set

L292 0002

• 250mm

•

3 Pce SelfAdjusting Pliers Set

L293 0001

• 175mm Curved Jaw

• 250mm Curved Jaw

• 200mm Needle Nose

aluminium and breglass reinforced synthetic materials

• Premium quality TCT teeth for clean, accurate holes

ProFit TCT Hole Cutter

6 Piece Kit Sizes: 16 - 40mm

Industrial Power Brushes

• Special quality wire with high flexibility & fatigue resistance • Suitable for work on large surfaces, deburring, cleaning & rust removal

• Unique ceramic grain

• Heavy metal grinding

• Suits high powered angle grinders

• Use high performance backing pad for better results

• Ideally suited for cleaning in hard to reach areas such as angles, corners & pipes

• General-use scratch brush for all light cleaning and rust removal jobs.

Bench

• Suitable for medium heavy duty brushing such as scale removal, rust removal, light deburring & cleaning of weld seams

• Extremely high filament density for aggressive brushing & long brush life

included

Fibre Disc

Backing Pad

High Performance

• M14 Thread

• Long tool life

• Cool grinding

• Recommended for ACTIROX

Flexovit Mega Inox Cut-Off Tub

• Ultra thin aluminium oxide, premium grade - for cutting stainless steel, alloy steels and hard ferrous metals

• Fillers Free of iron, sulphur and chlorine to prevent oxide contamination

• Complies to Australian Standards and Made in Australia

Flexovit Mega Inox

A46T-BF41

Right Angle Cut-Off Wheel

• Fast, straight cutting & long life

• Fillers Free of iron, sulphur and chlorine to prevent oxide contamination

• Complies to Australian Standards and Made in Australia

Flexovit Low Speed Chop Saw Cutting Wheels

• General purpose low speed cutting wheel

• For cutting of stainless steel and ferrous metals (bar & tubing etc.)

• Made in Australia

BONUS

Magnetic Welding Clamp x2

• Applications include welding, soldering, assembly, marking off and pipe installation

• 45° /90° /135° angle

66252849614

Flexovit A36S-BF41 General Purpose Cut-Off

• Designed with aluminium oxide grain forgeneral purpose fast cutting of metals

• All wheels are reinforced for the demanding nature of cutting-off metals with right angle grinders

• Complies to Australian Standards and Made in Australia

Flexovit MAXX Grinding Wheel

• Excellent depressed centre grinding wheel, formulated for high frequency grinders

• For stainless steel, alloy steels, cast iron, tool steel and hard ferrous metals

• Complies to Australian

Norton Blaze Rapid Strip Depressed Centre Disc

• Heavy coating of Norton SG Blaze ceramic alumina grain delivering longer life

• Does not shed on rust-encrusted pieces or load on soft materials

• Ideal for material removal, stripping and cleaning

Flexovit Megaline Blue HD Flap Discs

• Aggressive zirconia grain for high initial cut

• Strong polyester cloth & reinforced fiberglass backing for excellent product life and more material removal per disc

• Lower disc wear allows longer grinding time, without loss of cut throughout disc life

Norton Rapid Strip Depressed Centre Disc

• Open web construction for fast cutting action with very little loading

• Conformable enabling easy cleaning of uneven surfaces

• Thick, strong, synthetic fibres and extra coarse grit for long life

Flexovit, Norton and Blaze are registered trademarks of Saint-Gobain Abrasives Pty. Ltd.

MIG Spare Parts Kit

Common Spare Parts to Suit BZL 15, 24, 25 & 36

• Available to Suit BZL style torches

• Includes: Nozzles, Tip Holders, Gas Diffusers & range of tips

• Storage box with hang tag for easy display

Weldclass 250MST

Italy MIG/Stick/TIG

Code: WC-250MST

$2681.82 $2950.00

Weldclass 210MST

Italy MIG/Stick/TIG

Code: WC-210MST

$1908.18 $2099.00

NEW PRODUCT

Includes: MIG Torch 4m / Earth Lead 4m / Gas Regulator / Drive Rollers for Steel, Gasless / 15A plug

• 250A max output

• Synergic or manual MIG

• 12mm steel max MIG capacity

• 28 Pre-set programs

• Advanced Thermal Control

Includes: MIG Torch 4m / Earth Lead 3m / Gas Regulator / Drive Rollers for Steel, Gasless / 10A plug

• 210A max output

• Synergic or manual MIG controls

• 10mm steel max MIG capacity

• 2-in-1 10A or 15A input

• 26+ MIG Programs - for welding with different wires & materials

Promax HV2 Jacket

Hi-Vis & Harness-Compatible Welders Jacket

$153.64 $169.00

• Hi-Visibility material with reflective tape for day/night use

• Harness Compatible: Rear opening/flap allows use with Safety Harness, if required

• 100% Flame Resistant, including the silver reflective tape

Available in: M, L, XL, 2XL, 3XL, 4XL

SAFETY GLASSES FRONTSIDE CLEAR LENS WITH CLEAR FRAME

- Certified to AS/NZS 1337.1:2010 Personal Eye Protection.

- Medium impact rated.

- Our FRONTSIDE TR90 Frame is extremely comfortable to wear. Highly flexible, they can bend under pressure which makes them resilient to damage.

- AQUASHIELD Permanent Hydrophilic anti-fog lens coatings.

SAFETY GLASSES FRONTSIDE SMOKE LENS WITH CLEAR FRAME

- Certified to AS/NZS 1337.1:2010 Personal Eye Protection.

- Medium impact rated.

- Our FRONTSIDE TR90 Frame is extremely comfortable to wear. Highly flexible, they can bend under pressure which makes them resilient to damage.

- AQUASHIELD Permanent Hydrophilic anti-fog lens coatings.

SAFETY GLASSES FRONTSIDE SMOKE LENS WITH BLACK FRAME

- Certified to AS/NZS 1337.1:2010 Personal Eye Protection.

- Medium impact rated.

- Our FRONTSIDE TR90 Frame is extremely comfortable to wear. Highly flexible, they can bend under pressure which makes them resilient to damage.

- AQUASHIELD Permanent Hydrophilic anti-fog lens coatings.

SAFETY GLASSES FRONTSIDE POLARISED SMOKE LENS WITH CLEAR FRAME

- Certified to AS/NZS 1337.1:2010 Personal Eye Protection.

- Medium impact rated.

- Our FRONTSIDE TR90 Frame is extremely comfortable to wear. Highly flexible, they can bend under pressure which makes them resilient to damage.

- AQUASHIELD Permanent Hydrophilic anti-fog lens coatings.

SAFETY GLASSES FRONTSIDE POLARISED SMOKE LENS WITH BLACK FRAME

- Certified to AS/NZS 1337.1:2010 Personal Eye Protection.

- Medium impact rated.

- Our FRONTSIDE TR90 Frame is extremely comfortable to wear. Highly flexible, they can bend under pressure which makes them resilient to damage.

- AQUASHIELD Permanent Hydrophilic anti-fog lens coatings.

SAFETY GLASSES FRONTSIDE POLARISED BLUE REVO LENS WITH BLACK FRAME

- Certified to AS/NZS 1337.1:2010 Personal Eye Protection.

- Medium impact rated.

- Our FRONTSIDE TR90 Frame is extremely comfortable to wear. Highly flexible, they can bend under pressure which makes them resilient to damage.

- AQUASHIELD Permanent Hydrophilic anti-fog lens coatings.

SAFETY EYEWEAR

MACK VX2 SAFETY GLASSES

Code: MKVX2SPCGSM0000

• Complies to AS/NZS 1337.1:2010 Medium Impact

• Mining and food safe with no metal parts

• Colour: Green arms, green smoke mirror lens

MACK DUO SAFETY GLASSES

Code: MKDUOSPECCR0000

• Ultra lightweight

• UV resistant

MACK CHRONOS SAFETY GLASSES

Code: MKCHRONOSBL0000

• State of the art base curve 9 wraparound sports style

• Metal free design

• Colour: Blue arms, blue mirror lens

MACK WAVE SAFETY GLASSES

Code: MKWAVEREDA20000

• Adjustable side arms and nose pads

• Anti-fog and anti-scratch coating

• AS/NZS 1337.1:2010 Medium Impact

• Colour: Red arms, amber lens

MACK B-DOUBLE POLARISED SAFETY GLASSES

MACK MONTEREY POLARISED SAFETY GLASSES

Code: MKMNTEREYPZ0000

• UV & medium impact resistant

• Reduces eye fatigue

• Improves contrast & general vision

MACK TRADIE SLIP ON SAFETY BOOT

Code: MK0TRADIE

• Slip-on double gusset boot ideal for the tradesman wanting bang for their buck

CONTEGO ORIGINAL MECHANICS GLOVE

Code: COORIGINL

• Perforated forchettes for increased coolness and air flow

• Sizes S - 2XL

CONTEGO BLACKWATER MECHANICS

CUT 5 GLOVE

Code: COBLKMECH

• TPR impact finger/knuckle strap and back guard provides extra protection

• Sizes M - 2XL

FRONTIER P2 CUP RESPIRATOR

Code: FRP2CNV

• Lightweight disposable respirator

• Protects against dust, mists and fumes

• Adjustable nose clip

• Certified

FRONTIER P2 CUP RESPIRATOR WITH VALVE

Code: FRP2CV

• Lightweight disposable respirator

• Protects against dust, mists and fumes

• Highly efficient exhalation valve

• Adjustable nose clip

• Certified to AS/NZS 1716:2012

FRONTIER P2 MOULDED CUP RESPIRATOR WITH VALVE

Code: FRP2MCV

• Protects against dust, mists and fumes

• Pre-shaped nose cushion and contoured face seal

• Highly efficient exhalation valve

• Adjustable nose bridge

• Certified to AS/NZS 1716:2012

- High density Sound Reducing cup wall

- High quality acoustic insulation foam

- Premium soft touch ear cushion

- Hearing protection for noise levels to 110dB(A)

- High Cut Level F protection.

- Premium goat grain leather provides durability and dexterity.

- Wing thumb, stitch free palm for increased durability and relaxed hand feel.

- Reinforced thumb crotch for increased wear point durability.

• G-Tek® PolyKor™ BareHand gloves designed for light to medium cut hazard risks with an EN388 Cut Rating Level D.

• 21 gauge PolyKor™ BareHand lightweight soft feel shell provides excellent dexterity and tactile sensitivity. Seamless construction o ers increased comfort and breathability.

• Thin and Durable PU coated palm and fingertips help extend the life of the glove and provide excellent abrasion resistance.

• Grippaz™ Skins patented design on the inside and outside of the glove provides extra traction with oily or wet parts.

• 6 mil proprietary nitrile blend with patented fish scale pattern is more tear-resistant and puncture-resistant than conventional single-use disposable gloves – for prolonged use and reduced waste.

• Grippaz™ Skins patented design on the inside and outside of the glove provides extra traction with oily or wet parts.

• 6 mil proprietary nitrile blend with patented fish scale pattern is more tear-resistant and puncture-resistant than conventional single-use disposable gloves – for prolonged use and reduced waste.

• G-Tek® PolyKor® gloves designed for light to medium cut hazard risks with an EN388 Cut Rating Level C.

• 13 gauge PolyKor® lightweight soft feel shell provides excellent dexterity and tactile sensitivity. Seamless construction offers increased comfort and breathability.

• Thicker flexible nitrile micro-surface coated palm and fingertips help extend the life of the glove and provide excellent abrasion resistance.

Assured Protection™ for cut environments

• DURAtech® technology for outstanding durability of more than 18,000 abrasive cycles.

• AIRtech® technology delivers 360° Breathability.

• Micro-cup finish allows for a mor controlled grip.

COMFORT PERFORMANCE HANDCARE

Precision Handling™ in dry environments

• DURAtech® technology for outstanding durability of more than 18,000 abrasive cycles.

• AIRtech® technology delivers 360° Breathability.

• Micro-cup finish allows for a more controlled grip.

Controlled Performance™ in wet or oily environments.

• MaxiDry® is designed for use in oily or wet environments and is rated Type C according to EN ISO 374-1:2016.

• MaxiDry® Zero™ is a full coated glove designed for use in dry or wet environments requiring thermal resistance.

Secure Safety™ for chemical environments

• New TRITech™ protection providing a thinner, more comfortable chemical glove.

• Certified Type A product according to EN ISO 374:2016 + A1:2018 and food approved (EU).

MaxiDex® is a hybrid glove combining the best features of precision handling and diposable gloves into a groundbreaking solution which also includes ViroSan™, designed to prevent the proliferation of viruses which may deposit on the glove.

• Certified to EN ISO 374-5 for protection against Viruses.

• ViroSan™ virucidal within glove coatin prevents transfer of viruses from glove to other surfaces.

DRIVE PROFESSIONAL LAUNDRY POWDER

• Removes the toughest stains and dirt with enzyme power.

• Designed for front load and top load machines, low foam.

• Phosphate free.

SURF PROFESSIONAL LAUNDRY POWDER

• Effective stain removal on 23 different stains.

• Designed for front load and top load machines.

• Phosphate free.

DOMESTOS PROFESSIONAL TOILET & BATHROOM CLEANER

• Clings to toilet bowl rims.

• Kills 99.9% germs.

• Septic tank safe, phosphate free.

• Ultra concentrated thick bleach.

• Kills 99.9% germs.

DOMESTOS THICK BLEACH

• Removes mould, moss, grease, stains, dirt, organic soil, soap, smells.

• Septic tank safe, phosphate free.

DOVE DAILY MOISTURE HAND & BODY WASH

• Gentle pH & Dermatologist approved.

• Softer Smoother Skin after 1 Shower (Body Wash).

JIF PROFESSIONAL CREAM CLEANER

• Powered by plant-based stain remover, 100% natural cleaning mineral and millions of micro crystals.

• Removes 100% of the toughest dirt.

• Delivers 100% shiny clean.

• 0% phosphate, paraben, chlorine, dye.

DOVE DAILY MOISTURE LOTION

• Rich nourishment for dry skin.

• Helps give you long-lasting soft and smooth skin.

• Designed for guest amenities.

DOVE DAILY MOISTURE HAIR

• Nourishing system for smooth hair, resilient to damage.

•

IMPACT BIT SET 46 PIECE

• 25mm Bits: Phillips, Hex, Blade, TORX®, Square

• 50mm Impact Bits: Phillips, Hex, TORX®, Square

• Magnetic Nutsetters • Socket Driver Adaptors

• Magnetic Bit Coupler Extreme 75mm, Quick Release 75mm

HYDRAULIC GARAGE JACK RAPID LIFT 2,800KG

• Height Lowered: 100mm

• Height Raised: 510mm

• Twin pistons for superior lifting speeds

• Low profile, heavy duty frame construction

• Ideal for truck repair/maintenance

• Large rubber wheels for easy manoeuvrability

• 3 Interchangeable saddles

• 3 Handle settings

• Long T-handle allows easy positioning under vehicles with large overhangs

F A N M A S T E R cooling heating ventilation extraction F A N M A S T E R F A N M A S T E R cooling heating ventilation extraction F A N M A S T E R F A N M A S T E R NEW PRODUCT

240V 3 Pin 10A Plug (IAC-27) 3 Pin 15A Plug (IAC-45) 2 Fan speeds Portable on wheels Adjustable cooling arms Overload Protection Automatic restart & short cycle protection Condensation tank - 5L (IAC-27) 8L (IAC-45)

INDUSTRIAL PORTABLE AIR CONDITIONER IAC-27 INDUS PORT AIR CON 2.7KW 240V 111 L/s $1,635.45 $1,799.00 IAC-45 INDUS PORT AIR CON 4.5KW 240V 222 L/s $3,180.31 $3,499.00

NATIONAL FANS - INDUSTRIAL 240V 3 Pin 10A Plug 3 Speeds low wattage Oscillation feature on wall & pedestal Part No. Motor Airflow Price ex GST Price inc GST A NFFL45 120W 2000L/s $131.82 $145.00 B NFWL75 280W 4800L/s $209.09 $230.00 C NFPD75 280W 4800L/s $227.27 $250.00

Part No Desc. Airflow Price ex GST Price inc GST F A N M A S T E R F A N M A S T E R cooling heating ventilation extraction

PORTABLE AIR COOLER - AXIAL PAC125-ADC

PORTABLE Part No. Desc. Airflow Price ex GST Price inc GST

built from heavy duty steel premium cooling

$726.36 $799.00 240V 3 Pin 10A Plug 3 sided inlet Swing louvre function 120L incorporated water tank Full function remote control Up to 50m² cooling area

$1235.45 Ex. GST Inc. GST $1359.00

PORTABLE AIR COOLER - AXIAL PAC280-A 240V 2 Pin 10A Plug DC Motor 9 Speeds 3-sided air inlet Fan only option Touch LED control panel Automatic swing louvres Full function remote control Up to 30m² cooling area

INDUSTRIAL PORTABLE FUME COLLECTOR PACISD

HEPA Filters

Fume arm 360º rotation

Portable with castors & brake function

can be breathed PORTABLE AIR COOLERMULTI DIRECTION 240V 3 Pin 10A Plug Variable fan speed 300L incorporated water tank Water level indicator Full function remote control

– have been classified $4362.72 Ex. GST Inc. GST $4799.00 PACIMD LOUVRED WALL EXHAUST FANS 240V Hardwired Perfect for workshops & garages Gravity louvres to stop rain & reverse airflow IWEL300 300mm 300L/s $190.00 $209.00 IWEL350 350mm 630L/s $226.36 $249.00 IWEL400 400mm 800L/s $271.82 $299.00

through welding $4362.72 Ex. GST Inc. GST $4799.00

4.7kW 240V 3 Pin 10A Plug Cleanses & dehumidifies air Washable filters Compressor time delay Anti-freezing device

INDUSTRIAL PORTABLE AIR CONDITIONER Part No. Desc. Price ex GST Price inc GST IPAC-47 Portable Air Conditioner 4.7kW $4,817.27 $5,299.00 IPAC-61 Portable Air Conditioner 6.1kW $5,544.54 $6,099.00

INDUSTRIAL ROOF

INDUSTRIAL GALVANISED LOUVRED

415V Hardwired

Extracts large volumes of air

Airflow: 9000L/s (950mm)

12500L/s (1250mm)

A B C 21 PRICES ARE SUBJECT TO FREIGHT WHERE APPLICABLE. INDUSTRIAL SUPPLY GROUP

LEVERGUN® 450G GREASE GUN

K45-01

• Delivery pressure up to 82,750kPa (12,000psi)

• Rigid 150mm(6”) high pressure extension hose

• KY SUPERGRIP™ 3 jaw high pressure coupler

• Up to 1.5g per shot

• Heavy-duty 1.6mm thick barrel

• Maximum viscosity - Up to NLGI 2

• Compatible with 450g cartridges for contamination free greasing

GREASE COUPLER KY

• Pressures up to 12,000psi

• 1/8” BSP (F) Inlet

• Easy to use, snap on and twist and pull off

• Superior jaw design to ensure maximum grip

• ¼” NPT(F) inlet

• Reliable unblocking with leak free seal

• Suitable for use with any greasing system

RAPID FLO ROTARY

FUEL PUMP

GT-01

• Suitable for 205L drums

• Delivers 800ml per revolution (Up to 100L/min)

• Suitable for use with Diesel, ULP, Kerosene, and lubrication oils up to SAE30

TWIN PEDESTAL

AIR/WATER REEL

MATP1920-01

• Hose Size - 20m x 19mm

• Inlet/Outlet - 3/4” (F) /3/4” (M) BSP

• Pressure Rating - 250 psi

• Wall / floor mounting bracket integral to the reel design

COMPRESSED

AIR/WATER REEL

AW415B-01

• Hose Size - 1/2”x 15m

• Inlet/Outlet - 3/8”/ 3/8” BSP

• Pressure Rating - 250 psi.

• Hose Material - Reinforced PVC

B2 BOOSTER GUN

B2-01

• Used for high pressure delivery with any air-powered grease pump

• Increases the inlet grease pressure to overcome line resistance or nipple blockages

• ¼” NPT(F) inlet

PISTOL GRIP

GREASE GUN PREMIUM

L-PG450PV

• Offers high pressure or high volume delivery

• 450g cartridge or bulk fill

• Fitted with bulk loader and air release valve

• Develops 48,300 kPa (7,000psi) on high pressure setting

20L MANUAL OIL PUMP

L-DP20J

• 1.5m of PVC hose with anti-kink springs

• Suitable for mineral oils up to SAE90 viscosity

• 340mm pump length with suction tube extender

MULTI-PURPOSE GEAR

OIL PUMP

C7-01

• Compatible fluids - kerosene, two stroke mix, lubricating oils up to SAE140

• Pump output: 100ml/stroke

• Compatible with most drum sizes from 15-25L

MULTI-PURPOSE GEAR OIL PUMP, UNDERGROUND

MINING

C7Z-01

*Stock Subject to availability. Warranty subject to Macnaught Terms & Conditions. ©Macnaught Pty Ltd, 2022.

COMPRESSED

AIR REEL

AR415R-01

• Hose Size - 1/2”x 15m

• Inlet/Outlet - 3/8”/ 3/8” BSP

• Pressure Rating - 250 psi.

• Hose Material - Rubberised Reinforced PVC

OXY/ACET REEL

OA215B-04

• Hose Size - 5mm twin hose x 15m

• Inlet/Outlet - Gas Thread/ Gas Thread

• Pressure Rating - 175 psi.

• Hose Material - Reinforced Rubber (AS1335)

READY FOR ACTION

630A

20V Lithium-ion Cordless Grease Gun

660ANP

450g Trigger Action Grease Gun & Carry Case

• Contaminant free protection for your 660AN grease gun & greasing accessories

• Convenient & handy storage for an extra grease cartridge

• Grease pressures of up to 8,500psi (586bar)

• Ever-Flow System enables the use of thick tacky greases even in the coldest conditions

8828N2 20L Gear Oil Drum Pump

• Capable of delivering up to 110mL per stroke

• Downtube extension & extra Rieke adaptor make the pump suitable for use with a variety of 20L drums

• Ideal pump for the transfer of engine, gear, diff & hydraulic oils

• Supplied with 2 x 2Ah batteries & plastic carry case

• Grease pressures of up to 7,250psi (500bar)

• Adjustable delivery rates of 100g/min or 160g/min

• Able to dispense up to 21 cartridges before battery recharge is required (free fl ow)

• Able to dispense up to 16 cartridges per charge with grease flex & coupler

• Backlit display provides real time battery level, grease level & grease dispensed feedback information

• The display turning red indicates a blocked lube point or another issue

• Battery recharge time of 70 minutes

• Optional 4amp battery capable of dispensing up to 35 cartridges also available (free fl ow) & 32 cartridges with grease flex & coupler

Also available:

• Safety valve at 36psi (2.5bar) with depressurisation option

• Strong translucent bottle with level indicator

• Easy tool free maintenance

• Large filling opening

• Ergonomic design

• Not suitable for use with acids

454110N Samoa Oil Transfer Kit with Meter

• 3:1 ratio pump, 3m x 1/2" ID hydraulic hose & electronic resettable meter

• Flow rates of up to 12L/min

• Air pressure range from 20psi to 140psi

• Air consumption 180NL/min (6.4 cfm)

• Air inlet: 1/4" BSP(f)

• Fluid outlet: 1/2" BSP(f)

ALEMLUBE

Lockable Diesel Refuelling Storage & Dispensing Kits

• Kit consists of a 12V pump, 4m antistatic fuel delivery hose, 2m battery cables, automatic nozzle with fl ow rates of up to 50L/min

BRP5216C

Alemlube Caution Safety Barrier Reel

• Provides a temporary barrier to clearly identify dangerous areas

• Supplied complete with 16m x 52mm of durable yellow/black band with eyelet

• Compact design suitable to mount in most workplace environments

• Automatic spring rewind mechanism

• Robust plastic outer reel casing

• Swivelling steel wall bracket

Also available: BRP5216D as above but red/white band with eyelet

424170

Samoa 20kg Grease Kit

• Delivery rates of up to 0.9kg/min

• 55:1 ratio air motor develops grease pressures of up to 7,950psi (548bar)

• Will handle high density, tacky greases up to NLGI2

• Supplied with a 4m long hose assembly enabling quicker and easier greasing of your plant & equipment

• Heavy duty 3 jaw coupler ensures a tight & precise grease nipple connection

6603A

1L Brake Cleaner Sprayer

$1698.00

RATCHET TIE DOWN STRAPS - STANDARD

145RTD Ratchet Tie Down 4m 4pk Green

Padded grip and thumb release for more comfort and leverage, Strong and durable, Easy to use, SmartWeb™ technology provides webbing that is stronger and more abrasion resistant than standard webbing, Super strong rubber coated steel hooks, For lighter loads often hauled in a pick-up truck or on a small trailer & Much more secure than rope.

• Length: 4m

• Strap Width: 25mm

• Lashing Capacity: 340kg

• Break Strength: 680kg

RETRACTABLE TOW STRAPS

Retractable Tow Strap 4m Automatic Winds

Straps Stays clean because it never meets the ground. No more slack, mean the strap won’t get caught under tired or in vehicle axles. Unique self-winding case keep strap know and tangle-free between uses.

940RTD & 364RTD Ratchet X Tie Down Straps

Robust flared out aluminium handle with padded grip and release pawl for extra grip strength and leverage. Includes protective hex caps to help keep ratchet mechanism clean and sewn-in soft tie loops to prevent scratching. SmartWeb™ technology provides webbing that is stronger and more abrasion resistant than standard webbing. Pre-threaded webbing helps prevent accidentally feeding webbing from the wrong direction. Convenient securing strap to make it easy to tie off excess webbing or to keep your straps bundled after use. Extra-long webbing on attachment end for hard-to-reach anchor points. Super strong, Non-Marring Coated Steel S-Hooks

940RTD Ratchet X Tie Down Orange 4m 2pk

• Length: 4m

• Lashing Capacity: 680kg

• Break Strength: 1360kg

• Colour: Orange

• Webbing Width: 25mm

364RTD Ratchet X Camo 3m 2pk

• Length: 3m

• Lashing Capacity: 340kg

• Break Strength: 680kg

• Colour: Camo

• Webbing Width: 25mm

ULTRA LONG RATCHET TIE DOWN STRAPS

6m 1130kg Commercial Ultra Long Ratchet Tie Down - 2 Pack

• 2 pack

• 40% more webbing than standard

$230.00

PNEUMATIC & PUNCTURE PROOF WHEELS

YOUR NUMBER ONE CHOICE FOR WHEELS, CASTORS, AND MORE

NYLON WHEEL SPRING LOADED GATE CASTOR

• Ideal for use over uneven surfaces

• Enclosed spring design to reduce pinch-points and corrosion

• Make closing of residential gates easier

• Durable nylon wheels

HEAVY INDUSTRIAL SERIES CASTORS

WORKBENCH CASTORS KIT

• 4 free-swivelling 75mm (3”) diameter polyurethane castors

• Available in two mounting options: fixed or quick release

• Easily lift and reposition your workbench

• Suitable for workbenches up to 400kgs

Workbench Castors Kit - Fixed Mounting Plates (WBC001SET)

Workbench Castors Kit - Quick Release Mounting Plates (WBC002SET)

MATERIALS HANDLING

BEAVER GRADE S BOW SHACKLES

• Made to AS 2741

• For heavy duty lifting and towing

BEAVER GRADE S DEE SHACKLES

• Made to AS 2741

• For heavy duty lifting and towing

BEAVER COMMERCIAL DEE SHACKLES HOT DIPPED GALVANISED

BEAVER COMMERCIAL WIRE ROPE THIMBLES GALVANISED

BEAVER COMMERCIAL WIRE ROPE GRIPS GALVANISED

BEAVER LIFTING METRIC SHOULDERED EYENUTS TO DIN 582

BEAVER LIFTING METRIC SHOULDERED EYEBOLTS ZINC PLATED LARGE EYE

BEAVER LIFTING COLLARED EYEBOLT WITH METRIC THREADS BS 4278

BEAVER SNAP HOOKS ELECTRO GALVANISED

BEAVER QUICK LINKS ELECTRO GALVANISED

BEAVER CHAIN SPLIT LINKS HOT DIPPED GALVANISED

BEAVER COMMERCIAL CHAIN SWIVELS GALVANISED

BEAVER HOOK AND EYE COMMERCIAL TURNBUCKLES ELECTRO PLATED

BEAVER JAW AND JAW RIGGING SCREWS WITH LOCKNUTS

CHAIN REGULAR

(25KG PAIL)

B-SAFE TRADIE ROOFERS KIT

Code: BK061215TRAD

• Fall Arrest Harness

• Alloy Steel Twist Lock Karabiner x 2

• Attachment strap - 25mm web rated for 1 Person

• And other height safety equipment

HEIGHT SAFETY $226.36 $249.00 $317.27 $349.00

B-SAFE PROFESSIONAL ROOFERS KIT

Code: BK061015PRO

• Fall Arrest Harness

• Suspension Trauma Straps

Century Lithium Pro batteries are designed to provide long lasting power in recreational deep cycle applications. Capable of delivering over 3000 cycles1, 50% more usable energy and up to 10X faster recharging* they are suitable as a drop in replacement for standard 12V Flooded, Gel or AGM Deep Cycle batteries^. The superior energy capacity, operating temperature range and lightweight design makes Century Lithium Pro batteries ideal for use in a range of applications where longer life, faster recharge and dependable power is required.

1. At 80% DOD / #Not suitable for cranking/starting and under bonnet, grid connected solar systems or float charge applications. *Compared with standard flooded lead acid battery. ^When used within recommended operating conditions and in conjunction with a compatible Lithium charger or charging system. +Where feasible, always install upright to optimise the performance under a dynamic vibration condition

Our range of Engine Driven Water pumps have exceeded all expectations offering high performance and reliability whilst remaining a value product with either a full 2 or 3 year engine and pump warranty.

HP: 3

Max Flow Rate (l/min): 300

Max Head (m): 25

Suction (m): 8

Ports: 1 x 1½ " BSPM In, 1 x 1½ " BSPM Out

Weight (kg): 17.5

$690.00 $759.00

CLAYTECH 2 2 YEARPUMP WARRANTY

ClayTech Twin Impeller Engine Driven Fire Pump 300L/min CLA 2HP15ABS (808369)

HP: 6.5

Max Flow Rate (l/min): 300

Max Head (m): 80

Suction (m): 8

Ports: 1 x 1½ " BSPM In, 1 x 1½ " BSPM Out 2 x 1” BSPM Out

Weight (kg): 29.2

$1180.91 $1299.00

Light Commercial battery suitable for many applications across the industrial industry.

3 3 YEARPUMP WARRANTY

Deep Cycle AGM battery technology – suitable for applications including scissor lifts and other industrial applications which require high performance sealed deep cycle capacity.

Deep Cycle battery suitable for many applications across the industrial industry.

(808511)

A 30L wet and dry workshop vacuum cleaner delivers greater versatility than ever before, now with improved performance across all floor surfaces. Engineered with a 1500W motor, generating 230 Air Watts of suction power, thick skinned stainless-steel tank and power take-off socket.

INPUT: 1500W

PTO MAX: 800W

TANK VOL: 30L

NET WEIGHT: 7.47kg

MAX VAC PRESSURE: 20kPa

MAX FLOW RATE: 48.5L/s

AIR WATT: 230

HOSE: 2.6m

CABLE: 5m

AA362 Linisher With 8" Industrial Bench Grinder AA362W8 (808440)

The 8” (200mm) high powered Industrial bench grinders are complete with the new AA362 linishing attachment. Comes standard with:

• 915 x 50mm (36 x 2”) 240 grit belt

• 178mm (7”) diameter 100 grit disc

• 89mm (3 ½”) contact wheel

• 25m wide 60 grit grinding wheel

$549.00

$226.36 $249.00

Svenic Pro Sealant Applicator Caulking Gun - Orange - SV616TLV (810354)

• Strong, lightweight, metal construction, ensures reliability

• Comfortable operation due to smooth, effortless action, contoured trigger

• Premium epoxy powder coating resists corrosion

• Dripless function releases pressure from cartridge automatically

• 7:1 trigger thrust exerts up to 1.2kn of force

• Dispenses 300mL cartridges of silicone, acrylic, timber adhesive, mastic and caulk

$27.23 $29.95

ClayTech Engine Driven Transfer Pump 300L/min CLA WP15 (808367)

Type B Bauer Style Coupling Set

These couplings are easy to quickly couple and uncouple, providing a flexible solution especially where installations are difficult to access or in harsh environments.

Rubber Handy Roll

Used for a variety of applications including matting, packing, gaskets, dust curtains and mud flaps.

Flow Boss Heavy Duty Washdown Gun

Blue Air Tool Hose Assembly

Air, water and mild agricultural chemicals and fluid transfer where low temperature flexibility is required. Good oil mist resistance for portable compressor units. Supplied fitted with Nitto compatible couplings.

Straight Swivel x Hose Shank Connector for Washdown Gun

Made in brass for corrosion resitance, ductility at high temperatures, and low magnetic permeability and stainless steel hose shank for resistance to scaling and corrosion.

SELF-PRIMING JET PUMP JSL101PC

Twin Motor Air-Hydraulic

Pumps

• Suit all 700bar (10000psi) cylinders

• Twin air motors for high flow rate

• 8.5 litre/min at low pressure; 0.26 litre/min at 700 bar

Z Series Air-Hydraulic Pumps

• Suit all 700bar (10000psi) cylinders

• 4 and 7 litre models are supplied with steel reservoirs.

• ZR models are operated by push button remote control

KFK 15 Portable Beveler PART NO. 25315

Max. bevel width: 15mm

Designed for bevelling and deburring of parts, internal and external radiuses and holes. Specially designed for producing visual bevel and welding preparation. Powerful electric drive for extreme loads.

Benefits:

 Bevelling workhorse - large bevels with portable machine

 Swivel ergonomic handle for ease of use

 Extremely high powered 2500W motor

Tips

Buy your bandsaw blades through ISG

Bi-alfa Cobalt Bandsaw Blades

 Made in Germany - guaranteed quality and consistency

 Made for cutting all ferrous and non-ferrous metals from structural to engineering or tool steels.

 Lowest cost per cut and less downtime

 Smoother cuts and longer blade life

210 PHW Portable Bandsaw Machine

PART NO. 4210PHW

Largest capacity portable saw on the market. Due to the large wheels it is easy to move around on worksites. It uses a large 20mm wide bandsaw blade enabling straighter cuts and also larger range of cutting capabilities.

• Capacity (diameter) 35mm

• Capacity (depth) 52mm

• Gravity feed coolant system with magnetically attached bottle

PRO

• European made

• Capacity (diameter) 65mm

• Capacity (depth) 75mm

• Dual rail slide system

• Powerful 1500W motor

• 2-speed gearbox

• Lightweight, only 17kg

• Comes complete in plastic carry case

through steel up to 120mm x 120mm

• Offers an accurate, fast & clean cold cut

• 3hp 240V motor, 1450rpm • 90° - 45° swivel vice

• Supplied with T.C.T. mild steel blade Part No. S14

TORQUE WRENCHES

• Nm engraved marking scales on the front

• Ft-lb or in-lb engraved marking scales on the back

• Non-slip knurled handle design

• Turn screw to unlock and lock the torque setting

• Premium quality - Made in Taiwan

200MM, 750 WATT BENCH GRINDER

• Powerful; 750W (1hp) induction motor

• Cast iron body and base for long lasting performance

• Capacitor start / run motor

• N.V.R. safety switch

BENCH GRINDER WITH MULTITOOL ATTACHMENT

• 5 Grinding surfaces

• Genuine Multitool PO362 915 x 50mm Belt & Disc Grinding Attachment

• Grinder and attachment are assembled together in the box Part No. PO362-200HD

FORGED STEEL F

HIGH-FLEX AIR HOSES

• Hybrid polymer High-Flex hose

• Anti-kink technology, the hose will not kink when under pressure • Superior all weather flexibility -5°C to 65°C

• 300psi maximum working pressure

• Hi-visibility for safety • Nitto style fittings

ROTARY SCREW

COMPRESSORS

• Complete ready to go package with screw, tank, dryer and pre/post filters included

• Fully sealed soundproofed cabinet

• Extra large surface cooler

•

filtration

cleaner air

M18

1/2” MID-TORQUE IMPACT WRENCH WITH FRICTION RING KIT (2X 5.0AH)

HIGH TORQUE IMPACT WRENCH WITH FRICTION

M18 FUEL™ 2 PIECE POWER PACK 2F2 (M18ONEFHIWF34-0, M18GG-0)

FUEL™ ONE-KEY™ 3 PIECE POWER PACK 3A2 (M18ONEPD2, M18ONEID2, M18ONEFAG125XPDB-0)

FUEL™

M18 FUEL™ 1/2”

RING KIT (2X 5.0AH)

M18