ISG Catalogue | June - August 2022

Industrial Supply Group supplies quality industrial products to all facets of Australian industry. Supported by major industrial manufacturers of power tools, hand tools, abrasives, and safety products.

ISG is a coalition of major independent industrial supply companies servicing customers Australia wide with the proven capacity to service national accounts.

Supporting Australian Business with Local Knowledge and National Buying Power

Part of the Stealth Global Holdings Group of Companies (ASX:SGI)

HIGH DENSITY LITHIUM

THE MOST POWERFUL 2-ROW BATTERY PACK IN THE WORLD!

18 V - 10.0 Ah

POWER MEETS ENDURANCE

8.0 Ah 5.5 Ah 4.0 Ah 10.0 Ah

LONG SERVICE LIFE + anks to the new LiHD cell technology, in combination with a newly developed battery pack

MORE POWER +

• Busbars and larger contacts capable of handling high currents

• 3x better conductivity thanks to cell connectors made of a specialized copper alloy

LONGER RUN TIME +

• More active material in the new 21700 cells

• Use of higher-quality materials (silver and copper)

• Optimal protection against internal contamination through complete grouting and full protective coating on the electronic components, as well as an optimal seal on the top structure

• Cells protected by a rubber bu er

• Less frequent charging thanks to more usable cell energy

• Exterior rubber coating on the battery pack provides secure, non-slip stability and protects against impacts

380mm Pedestal Drill Press B16RM(HWZ)

25mm 520W Die Grinder GP2S2(H1Z)

36V Cordless 350mm Chain Saw CS3635DB(H4Z)

18V Heat Gun RH18DA(H4Z)

18Kg 1400W 30mm Hex Demolition Hammer H65SB3(H1Z)

36V Brushless 2 Piece Combo Pack KC36DBDL2(HRZ)

18V 10000lm Worklight UB18DD(H4Z)

18V Orbital Sander SV18A13DA(H4Z)

125mm 1200W Angle Grinder with Trigger (Deadman) Switch G13SC2(H1Z)

36V Brushless 1/4 Impact Driver WH36DC(H4Z)

36V 20mm Vibration Drill DV3620DA(H4Z)

18V Brushless 2 Piece Combo Pack KC18DD(HCZ)

614 Dry Cut Saw

$1271.82 $1399.00

Features carbide-tipped blades to cut different materials and geometric configurations without cutting fluid.

Cutting generates no burr, abrasive dust or heat, providing clean and fast cuts on steel, copper, plastic and wood. Either straight or miter.

P/N 14218 - S18

Micro Thermometer IR-200

The micro IR-200 Non-Contact Infrared Thermometer provides simple, quick and accurate surface temperature readings at the push of a button. Simply squeeze the trigger and point the ultra-sharp dual class II lasers at the surface being measured.

$239.00

VJ99 V-Head High Pipe Stand

P/N 14223 - S24

Hardened alloy steel jaws are designed and manufactured to ensure the longest possible blade life. One-step internal cam mechanism provides the quickest and simplest way to keep the cutting blades precisely aligned. Handles and grips designed to allow greater mechanical advantage for crisp, controlled cutting. Capacity for hard metals (42RC)3: 6.4mm for S18 and 7.9mm for S24 model.

• Locking ring allows for quick vertical height adjustments.

• Height adjustment: 71-132mm. Maximum pipe capacity: 300mm. Maximum weight capacity: 1134kg

Micro Gas Sniffer

The micro CD-100 Combustible Gas Detector provides simple and quick readings to identify the presence of combustible gases. With adjustable sensitivity, even low-levels of gases can be detected in seconds.

$353.64 $389.00

For plastic (PVC, CPVC, PP, PEX, PE) and multilayer tubing. Pipe capacity: 3-35mm. Spring-loaded handles for faster positioning. Single stroke, easy cut. PC-1375 ML has a durable aluminum construction for heavy-duty use. Easy attachable ML-adapter for improved multilayer cutting and instant re-rounding of tubing.

• Cools threads and pipe during operation.

• Speeds metal removal.

• Improves thread quality.

• Reduces threading torque.

Crescent Lufkin Ultimate 8m Tape Measures

• Strong ABS plastic case

• Sliding end hook automatically adjusts to inside and outside measurements

• Bright distinctive colours - yellow, green or orange

• 4 Rivets end hook

• Nylon coated blade

Weller 240v Soldering Iron With LED

• A round, soft-grip, non-slip handle design helps relax the hand during extended use.

• Weller heat resistant LEDs and housing ensure long life.

UW148MN

25mm $18.14 $19.95

UW148MEN 8m/26’ x 25mm $18.14 $19.95

Part No. Wattage Ex.GST Inc.GST

SP25NAU 25W $40.86 $44.95

SP40NAU 40W $44.55 $49.00

SP80NAU 80W $50.00 $55.00

GEARWRENCH 15PC Metric Long Pattern Combination

• Off-corner loading on open end: stronger grip, reduces fastener rounding, up to 25% more torque

• 8-22mm

• Bonus set- 15PC SAE Long Pattern Combination

• Head rotates 180° through 14 locking positions

• Extends from 736mm / 29” to 1219mm / 48”

P/N 56662

RATCHETING SPANNER SET

• Double wall, heavy gauge steel construction which offers greater strength and security

• Gas Struts on all tool chest lids for added safety

• Fully extendable snap lock drawers with centrally located handle that allows you to gain full access to all of your tools

• All drawers are fitted with Industrial grade Ball Bearing slides for easy & comfortable use

• Lockable drop fronts for added security

• Includes draw liners and top mat to protect your precious tools

ABBOTT & ASHBY3

3YEAR WARRANTY

150MM / 6” Industrial Bench Grinders ATBG280/6 (804531)

• Powerful Induction Motor

• 36 and 60 grit 25mm wide Aluminium Oxide grinding wheels for fast removal of material

• 50mm wide wheel guards for the use of wire wheels without fouling for greater user protection

8” Industrial Bench Grinder with Wire Wheel ATBG600/8-WIRE WHEEL-P (806244)

• Powerful 3/4 HP+ Induction Motor

• 36 and 60 grit 25mm wide Aluminium Oxide grinding wheels for fast removal of material

• Crimped wire wheel for cleaning and deburring material

THORHAMMER

710g Copper/Rawhide Hammer #1(1-1/2lb) 32mm Face Wood Handle TH210 (508924)

2380g Copper/Rawhide

Hammer #4(5-1/4lb) 50mm Face Wood Handle TH216 (508927)

NORMALISED SLEDGE HAMMERS - YELLOW FIBREGLASS HANDLE Cra ed Tough

Head is normalised for a softer face (below 20HRC) that will mushroom, for applications where risk of chipping needs to be minimised. Hammer heads are pinned through the steel core of the fibreglass handle for added safety.

NORMALISED BALL PEIN HAMMERS

Useful for engineers and used in metal work for striking punches and chisels Hammer ball end for riveting work. Normalised (softer face) for applications where risk of chipping needs to be minimised.

PODGER BARS

Used for levering and aligning. Heel set to 40 degrees for optimum levering. Blade is ground to 30 degrees for easy entry between surfaces. Hexagon profile to minimise bar roll.

Replacement Rawhide

Face Size ‘4’ 50mm TH16R (508918)

• Suits TH16 & TH216

TRADESMAN

Offers great protection in a convenient size. Protects tools, meters, small parts and tech devices. Soft interior lining and a durable zip-up closure.

WIRE ROPE PUNCHES

Used to safely drive out pins and keys Long two-handed rubber handle for comfort. Head attached with wire rope to reduce shock transferral during striking. Urethane ring for overstrike protection

BARREL DRIFT 5 PIECE SET

Used for aligning holes in construction and for expanding holes in mild steel. Reduced likelihood of scoring, even when driven hard. Heat treated for best performance.

Set Components: 16mm, 19mm, 22mm, 25mm, 30mm

TRADESMAN PROTM TOOL TOTE

40 pockets for tool storage, handles for easy carrying and a zipper pocket to secure small parts and tools. Includes padded shoulder strap.

TRADESMAN PROTM BACKPACK

39 pockets for plenty of tool storage, including a hard, molded front pocket for safety glasses and a front zipper pocket to store loose parts.

9 Drawer Tool Chest with Lockable Drop Front WHI509BP (710752)

14 Drawer Tool Chest with Lockable Drop Fronts WHI514BPR (710754)

MKA2033

ENGINEERS’ VICES - CAST IRON 150mm

• High strength cast iron body, slide and nut,

• Corrosive resistant ACME threaded screw,

• Swarf deflector,

• Forged steel handle,

• ‘V’ notched, case hardened, replaceable jaws.

• 25 year Warrenty PART NO. 60156

ALL STEEL FITTER’S CLAMPS

- HEAVY DUTY 300mm

• Designed for safe fast and easy operation.

• Steel bar,

• Clamping arm and pressure pad are hardened, heat treated and zinc plated;

• Ergonomically designed handle and release lever;

• Wear resistant ratchet design which prevents self-loosening even under vibration.

• Will exert pressure to 7000N. PART NO. 43330

PIPE VICE - CHAIN TYPE BOTTOM SCREW SUPER GRADE - UNBREAKABLE 100mm

• Sturdy, compact design

• Machine cut, heat treated, replaceable jaws

• High tensile chain

• Tighten rapidly providing a powerful grip rendering the pipe immoveable

• 25 year warranty Australian Made PART NO. 60273

FABRICATED OFFSET VICES 150mm

• Australian Made

• Designed for all heavy duty work.

• Manufactured from steel plate

• 25 Years Warranty PART NO. 60214

STANDARD “CURVED” PRY BAR SET - (3 Piece Set)

• Ideal for prying, opening and positioning work

• Made from the highest quality alloy and carbon steel, hardened and tempered the full length of the bar

• Curved blade for extra leverage with corrosion resistant finish PART NO. 61350

G CLAMP, SUPER GRADE ONE HAND 100mm

• Unique design leaves one hand free to hold items being clamped whilst the other operates the clamp by means of a specially designed knurled nut.

• ‘I’ frame for maximum loading and resistance to twisting,

• Two start rolled thread for quick clamping

• Square frame for maximum clamp usage PART NO. DW73040

- Ideal for manipulating large capacity threaded pipe joints and tightening or loosening threaded collars on pipe work, nuts & bolts

- Pipe capacities from 38mm to 125mm

- Frame & handle are a one piece lightweight aluminium casting

ALUMINIUM PIPE WRENCHES

Ideal for industrial,

- Used to punch out pins and dowels

- Manufactured from high quality carbon steel

- Point is hardened & tempered to withstand continuous use

- Contains one each of nine sizes

$45.45 $49.99

- Stepped jaws greatly extend range of taps each wrench will accept

- Adjustable tommy bar for tapping close to a shoulder or other obstructions

- Manufactured from high quality carbon steel

- Delivers a punch when hand pressure is applied to knurled head

- One handed operation, hammer should not be used

- Depth of impression can be adjusted by turning knurled head

- Manufactured from high quality carbon steel

$31.82 $35.00

High Speed STEEL Drill Bits & Sets

• HSSG (M2) STEEL 118° point angle type

• Suitable for steel, cast steel, grey cast iron, annealed cast iron, bronze, brass, aluminium • Easy centring

• Long tool life

• Good chip removal

6mm Shank / Aluminium Oxide

Fan Grinders

Hacksaw

HSS Step Drill

For use in sheet metal, aluminium, plastic and fibreglass. During drilling, the next step deburrs the previously drilled hole.

10

Extractor Insert Set

Engineers Scriber

Double End 90° Bend Point

267M06020

• Size: 270mm

• Made from stainless steel

BUILDING AUSTRALIA SINCE 1917

Engineers Scriber

TCT point

267M06041

• Size: 150mm

• Made from stainless steel

Thread Repair Kits

$9.99

• Knurled aluminium handle Micrometer

• Knurled aluminium handle

Everything you need for complete thread repair in one handy case. Suitable for aluminium, cast iron, magnesium and most machinable steels.

• Driver handle with quick chuck and 4mm driver

• 90mm full hook, angle hook, straight hook, 90° hook

• Magnetic telescopic pick-up tool

$22.73 $25.00

• For measuring external dimensions of any small space or item, including fasteners and threads.

• Measuring range: 0–25mm • Graduations: 0.01mm

Accuracy: ±0.004mm

$75.45 $83.00

Spring

•

Parallel Clamps

• Light weight smooth carbon steel bar and aluminium body.

Precision Engineer Squares

•

•

• 100mm jaw depth with large TPR grip pads.

• Maximum clamping force up to 400kgs.

Black Book

• Matt laminated grease proof pages

• Wire bound to stay flat on workbench and much more

Professional Measuring Instruments

Drill and Tap Set includes sizes: M2.5, M3, M3.5, M4, M5, M6, M8, M10 & M12

Range: 8-150 mm

• Set consists of 6 gauges

• Satin chrome finish

Resolution: 0.1°

Accuracy: ±0.1°(vert. & hor.)

±0.2°(other)

Size: 59 x 59 x 28 mm

Coolant Proof Dual Scale Digital IP67 Calipers

Resolution: 0.01 mm/0.0005”

Accuracy: ±0.03 mm

• Calibration Cartificate

• USB data output

• Automatic power off

• Quick forward/reverse trigger

• Quick & simple to operate

• Light weight composite handle

• M3-M10 mandrels also available

• Suitable for Aluminium and Steel nutserts only.

Outside Micrometer

• Stainless steel spindles

• Strictly made in accordance with DIN 863

• Spindle Thread hardens, ground & lapped for ultimate accuracy

• Comes with Spindle locks

• New special carbide used on measuring anvil instead of traditional easy-wear off carbide tip

• Clear graduations laser-etched on satin chrome nish for easy reading

• Comes with ratchet stop for constant force (5-8N 20% better than the normal standard of 5-10N)

• Supplied in premium sturdy case for convenient storage

• Integrated side trays & elevated headrest

• Made in Taiwan

Size: 1005 x 470 x 135 mm

Load Capacity: 150 Kg

Weight: 5.3 kg

Caliper Digital IP54 Large Screen

• 15mm Character size for an easier to read measurement

• Three Readings:

• Metric

• Decimal

• Fraction

• IP54 Protection against water, oil, dust, or other liquids

• Hardened, Ground & Lapped measuring surfaces

• Zero setting at any position, plus data hold

Magnet Squares with On / Off

• The fast & easy way to hold metal workpieces at 30°/ 60°, 45°, and 90°.

• Turn the magnet Off or at the mid-point position when setting up, turn on when you’re ready to work. Fast and safe set-up!

• Ideal for round and square tubing, angle, and at stock.

• Easy to clean. Simply turn Off and wipe.

Prime Rigger Harness

Ref. 915003

Full body harness with large upright dorsal d-ring and front chest d-ring for fall arrest. Adjustable shoulder, chest and leg straps. Confined space loops and quick connect buckles. Suspension trauma straps included. Certified to AS/ NZS 1891.1

Double Webbing Lanyard

Roofers Kit Standard

Ref. 915100

Austlift Standard Roofers Kit comes complete with a Tradesman full body harness, fall arrest system and tie off anchor strap all packed in a back pack for convenience, suitable for any roofing application.

Stainless Steel Water Repellent Harness

Ref. 915018

The Stainless steel fittings and repel technology coating makes this a durable long lasing harness in highly corrosive environments. Constructed from a unique polyester webbing, incorporating the special repel technology - which repels oil, dirt and water. The coating does not impact weight, feel, colour and texture of the webbing. Liquid spills can easily be wiped away when blotted with a clean cloth, and dry soil can be brushed of easily.

$104.55 $115.00

Ref. 916122 Ref. 916100

2M long x 44mm wide polyester webbing. Maximum free Fall: 2M. Certified product and complies to AS 1891.5:2020.

Double Elas�cated Webbing Lanyard

44mm wide tubular webbing. Relaxed Length: 1.4-1.6M. Expanded length: 2M.

Sharp Edge Double Adjustable Rope Lanyard

Ref. 916232

2M long x 12mm diameter kernmantle rope with sharpe edge resistance. Maximum

AUSTRALIA’S

ACCESS PLATFORMS

• Super strong fully welded design fabricated from heavy duty aluminium

• 100mm deep treads improve safety and comfort when climbing

• Manually operated braking system with high-vis powder coated activation arm helps minimize unauthorised access

• Supplied as a flat pack for optimal transporting

ORDER PICKING PLATFORM

• Industrial Duty Rated order picking ladder designed for use on commercial sites and warehouses

• Rear Tilt-N-Go castors

• Large 600 X 500mm platform

• Ideal for stock picking or industrial applications

• Spring loaded castors for ease of manoeuvrability

• Made to Australian Standards AS1892

Single Webbing Lanyard

2M long x 44mm wide polyester webbing. Maximum free Fall: 2M. Certified product and complies to AS 1891.5:2020.

$71.82 $79.00

Single Adjustable Webbing Lanyard

Ref. 916111

#1 LADDER BRAND

P170 JOB STATION PLATFORM STEPLADDER

• Huge platform area (610 x 457mm) adds comfort and stability

• Trapezoidal step design provides a strong step to stile joint

• Multi-function handrail

• Fully integrated bracing and castor system with a patented industry leading design

• Made to Australian Standards AS1892

AUSTRALIA'S #1 LADDER BRAND

HEIGHT SAFETY

B-SAFE TRADIE ROOFERS KIT

Code: BK061215TRAD

Kit contains the following:

• BH01120 - All Purpose Fall Arrest Harness

• BS010315A - 15m Kernmantle Rope Safety

Line with Manual Rope Adjuster

• BP03101.5 - 1.5m Webbed Attachment Strap

• BL01000HD - Energy Absorber

• BSK0003-16 - 3 x Alloy Steel Twist Lock

Karabiners

• BA00024 - Suspension Trauma Straps

• B-Safe Backpack

B-SAFE FALL ARREST HARNESS WITH WEB

LANYARD

Code: BH01112

• Lightweight and comfortable

• 2m web shock absorbing lanyard permanently attached to the rear D ring

• Fully adjustable leg, shoulder, chest & waist straps

• Side D rings for pole strap

• Frontal fall arrest loops

• Complies to AS/NZS 1891.1

B-SAFE 2M LANYARD KERNMANTLE ROPE WITH SNAP HOOKS

Code: BL02112HD

B-SAFE 2M LANYARD KERNMANTLE ROPE WITH SNAP & SCAFFOLD HOOK

Code: BL021222HD

B-SAFE 2M LANYARD WEBBING WITH 2X SNAP HOOKS

Code: BL01112HD

B-SAFE PROFESSIONAL ROOFERS KIT

Code: BK061015PRO

Kit contains the following:

• BH01120 - All Purpose Fall Arrest Harness

• BS010315A - 15m Kernmantle Rope Safety Line with Manual Rope Adjuster

• BP03102 - 2m Webbed Attachment Strap

• BL01112PRO-ADJ - 2M Heavy Duty Adjustable Shock Absorbing Lanyard with Snap Hooks

• BSK0003-16 - 1 x Alloy Steel Twist Lock Karabiners

• BA00024 - Suspension Trauma Straps

• B-Safe Back Pack

B-SAFE ARRESTO MINI SELF RETRACTING LANYARD

Code: BMIC02-130AT

• Extremely light weight (less than 600gm) and easy to carry

• Inbuilt textile energy absorber

• 140kg capacity with 2m length

• Aluminium triple action karabiner with fall indicator

• 21mm Technora polyester webbing

• Edge tested (to 100kg) and approved where falls over an edge are possible

B-SAFE 2.5M RETRACTABLE LANYARD

Code: BL05332.5

B-SAFE TRAUMA ATTACHMENT STRAP

Code: BA00024

• Prevention of suspension trauma after a fall

• Universal attachment to all harnesses

• Two zip up pouches, one for each side of the harness

• High tenacity webbing straps with loop in one pouch and hook in the other

• Fully adjustable

B-SAFE

•

SAFETY EYEWEAR

FRONTIER VISION X SAFETY GLASSES

• Tough polycarbonate frame with anti-scratch lenses for 99.9% UV protection

• Moulded nose bridge

• Ultra lightweight for increased comfort

MACK DUO SAFETY GLASSES

CODE: MKDUOSPECCR0000

• Ultra lightweight

• UV resistant

HAND PROTECTION

FRONTIER RIGGER GLOVE

SAFETY PPE

KWIKMASTER KM60 & KM80 INDUSTRIAL WIPERS

• Available in General Purpose and Heavy Duty

• Excellent water and oil absorbency

• High strength, performance and durability

• Cost effective - rinseable and reusable disposable wipers

NINJA RAZR DIAMOND CUT 5 GLOVE Code: NIDIAMNC5

MACK VX2 SAFETY GLASSES

SMOKE: MKVX2SPCGSM0000

• Complies to AS/NZS 1337.1:2010 Medium Impact

• Mining and food safe with no metal part s

MACK CHRONOS SAFETY GLASSES

CODE: MKCHRONOSBL0000

• State of the art base curve 9 wraparound sports style

• Metal free design

• Colour: Blue Mirror lens. Blue arm

99% UV

GRIPPAZ NITRILE GLOVES

Code: GZGLVSKND

Sizes: M-2XL

100% Nitrile Chemical resistant Silicone free

FRONTIER SUPERSUIT DISPOSABLE COVERALL

Code: FRCVRT456

Sizes: M-2XL

• Type 4, 5, 6

• Low Linting

• Stick down zipper flap

• White colour for increased coolness

XTLZ-COLOUR-SIZE

BISON XT ZIP SIDE, LACE UP SAFETY BOOTS

COLOURS: BLACK, STONE, WHEAT SIZES: 4 - 14 | EXTRA WIDE SIZES: 8W, 9W, 10W, 11W, 12W

• Bison Grip nitrile rubber out-sole compound and multi-directional tread design, delivers maximum grip on all surfaces.

• A unique 4 layer heel support system for enhanced heel and lower leg stability to prevent ankle roll.

• Proven hi-durability materials; abrasion, heat and chemical resistant, organic fat, oil and acid resistant.

• Nitrile rubber outsole offers extreme protection up to 300°C.

• Moulded footbed compound, with athletic arch support, provides compression resistant cushioning and improved support.

$150.00

$165.00

DUNEBR

DUNE-COLOUR-SIZE

BISON DUNE ZIP SIDE, LACE UP, HIGH TOP SAFETY SHOES

COLOURS: BLACK, BROWN | SIZES: 5 - 13

• Bison Grip 300°C rated nitrile rubber self dispersing venting system and breathable lining combine to enhance heat dispersion and reduce moisture.

• Moulded footbed compound, with athletic arch support, provides compression resistant cushioning and improved support.

• Breathable, synthetic and leather upper with ergonomic zip and lace combination.

• EVA midsole: Lighter, more flexible and better impact absorbtion.

• Anti-penetration IMFLEX insole uses thermoforming technology to allow for additional comfort at heal strike area as well as up to 20% more flex across the forepart of the foot, insole complies to ISO 20345:2004 International Safety Standards.

E15-4PS-(SIZE)

EUREKA PUNCTURE SOFT GLOVES

• Unique combination of extremely high level cut resistance F protection. Along with a mid level Hypodermic Needle Puncture Resistance.

• Seamless knit para-aramide, FR polyester and fibre glass liner delivers dexterity and protection.

• Breathable nitrile composite foam with FR properties, suitable for contact heat over a short time. Coating provides dry and wet grip.

• Sizes: XS - 2XL

E15-4DUO-(SIZE)

EUREKA PUNCTURE DUO GLOVES

• Extremely high EN388 Level F Cut protection, 360 degree puncture protection from mid-level Hypodermic Needle Puncture Resistance in palm, fingers and back of hand.

• Seamless knit para-aramide, FR polyester and fibre glass liner designed for dexterity and protection.

• Breathable nitrile composite foam with FR properties. The coating provides good dry and wet grip on palm and fingers.

• Sizes: S - 2XL

E15-4VRCUT-(SIZE)

EUREKA FLEXI VIBRATION CUT GLOVES

• Designed to reduce vibration transmission for low to mid frequency tools from 50 - 350Hz.

• High cut resistance reaching EN388:2016 Cut Rating D, with Level F at palm.

• 15 gauge nitrile liner with padded palm o ers high comfort and dexterity, with protection against continued exposure to vibrating equipment.

• Sizes: XS - 2XL

Resuscitation Chart Full Colour

• Measures W450mm x H600mm

• Made from long-lasting Polypropylene

Vehicle & Low Risk First Aid Kits

This popular first aid kit is great value for money. It has a simple design and practical internal layout, supplied in an embroidered, hardwearing, zippered, 600D/PVC case. This compact kit is ideal for the glove box, cupboard or suitcase.

848890 - BLUE

856603 - GREEN

848794 - RED

Heartsine® Samaritan® PAD 360P

Fully Automatic Defibrillator

Simple to use device with CPR coaching. Highest level of protection from dust and water. Most compact design weighing only 1.1kg 4-year electrode and battery life.

Scafftag Mk I Standard Insert

The Mk I Scafftag system fits all standard tube fit scaffolding. The Mk I loading colour coded inserts incorporate informative graphics and inspection details on the front face. Inserts are colour coded according to load (light weight, medium weight, heavy weight or special purpose). Complete kit includes: 10 holders, 10 status inserts and one permanent marking pen.

Scafftag Mk I Holder - 10 Pack

The Mk I Scafftag Holder, goes with the Mk I Scafftag system.

Defibrillator Cabinet

This wall-mounted defibrillator cabinet offers convenient access & keeps the AED clean and dust free.

Sharps Container - 2L

• Complies with with Australian Standard AS4031/92

• Dispose of medical and contaminated waste responsibly

• Reduce the risk of spreading bacteria and infectious diseases

• Ideal for items such as swabs, gauze, bindings, bandages, adhesives, masks and gloves

• 180(L) X 140(W) X 130(H)mm

Emergency Information Sign - First Aid (Metal) H450mm x W300mm

• These signs indicate the location of; or directions to emergency related facilities.

• Complies with AS 1319.

Lightweight Pole Stretcher

Ideal basic emergency first aid stretcher. Aluminium folding pole construction

Roto Light

• Attaches to your traffic control cones to ensure visibility.

• Cost effective, wind powered rotating beacon. No batteries required

Economy Plastic Expanding Barrier

• Sturdy plastic construction with high resistance to corrosion

• Lightweight and portable, weighing at just 3kg

• Barrier legs can be filled with water for extra stability

• Built-in handle and locking strap for ease of handling

• Expands 2.4m wide and retracts to 250mm when fully closed

AED (Automated External Defibrillator)

Sign

• Complies To Standard AS 1319:1994

• Measures W225mm x H300mm

• Made from long-lasting Polypropylene

• Clearly mark the location of your workplaces’ AED (Automated External Defibrillator) and stay safe at work

Wall Mounted Webbing Tensabarrier

DANGEROUS GOODS STORAGE

AUSTRALIAN MADE SPILL AND SAFETY EQUIPMENT FOR ALL WORKPLACES

Safety cabinets - flammable liquids

• Heavy-duty, powder-coated steel

• Self-closing lockable doors

• Double wall construction with 40mm thermal barrier

• Adjustable shelf(ves) plus fixed base shelf

• Adjustable screw-in feet

• Manufactured to meet AS1940-2017

Aerosol can storage cages

• Heavy-duty, powder-coated steel

• Perforated sides and door(s) provide

• Bolt down plates and padlockable door with magnetic latch

•

Safety cabinets - corrosive substances

• Safely store Class 8 corrosive substances indoors

• Heavy-duty, powder-coated steel

• Supplied with chemical resistant poly trays

• Self-closing lockable doors

• Double wall construction with 40mm thermal barrier

• Adjustable, perforated shelf(ves) plus fixed base

• Manufactured to meet AS3780-2008.

Gas cylinder storage cages

• Tough zinc anneal steel construction

• Solid steel roof and floor

• High open area perforation provides natural ventilation

• Door fitted with magnetic latch and padlock lugs

• Manufactured in Australia to meet AS4332-2004

KEYED ALIKE PADLOCKS

• Solid brass bodies (20mm-50mm)

• Steel shackle for cut resistance

• Lifetime Guarantee

HIGH SECURITY & WEATHER TOUGH® PADLOCKS LOCKOUT HASPS & TAGS

• High security heavy duty bodies withstand physical attacks

• Keyway cover keeps out dust, dirt and grime

• Available keyed differ (standard), keyed alike or master keyed

• Lifetime Guarantee

• Keeps equipment inoperative while repairs or maintenance are being undertaken

• Designed for multiple worker lockout

• Do Not Operate Danger Tags (12pk )

• Durable Polyester laminate resists water, grease & extreme temperatures

HIGH SECURITY LAMINATED PADLOCKS

• Brass covered laminated steel body for higher strength and resistance to the elements.

• Tough-Cut™ octagonal boron-carbide shackle is 50% harder than hardened steel

• Dual ball bearing locking for maximum pry

EXTRA HEAVY DUTY TARPS ZENEX™ SAFETY PADLOCKS

• ZenexTM body provides superior performance against chemicals, moisture, heat, cold and UV

• Designed exclusively for Lockout/Tagout applications

• Key retaining ensures padlock is not left unlocked

• Can be laser engraved on up to 4 sides for permanent lock identification

• Waterproof and mildew resistant

• UV resistant for extended outdoor exposure

• Heavy duty moulded plastic reinforced corners and rust free eyelets every 45cm

• Ideal for heavy duty or hard wearing applications such as trailer covers, equipment covers, cargo covers, roof repairs and 2nd storey extensions

• Larger sizes available upon request

Metal Working Fluids

Excision high quality metal working fluids for all applications.

Water Soluble Cutting Fluid

XDP 905 Foam is a cutting, drilling and tapping oil that is the ultimate performer in high pressure applications formulated for ferrous and non ferrous metals, great on stainless steel. XDP 905 Foam is a highly formulated semi-synthetic cutting oil - the latest development in extreme pressure cutting and tapping oils.

XDP905 Spray

Neat Cutting Oil 400g

XDP905 Spray is a high performance neat oil for medium and severe cutting operations (milling, grinding, drilling, tapping, broaching and general cutting on lathes). It´s suitable for cutting steel, stainless steel, low and high steel alloys, cast iron, aluminum alloys materials and yellow metals like copper and brass

XDP1000 is a water-miscible cutting fluid with high lubricating and cooling properties based on refined mineral oil and anti-wear and anti-oxidant additives. Thanks to its high oil content, it obtains a very good surface finish of parts and a long life of the tool. XDP1000 is a cutting fluid that is suitable for machining metals such as steel, copper, brass and their alloys.

XDP905 Fluid

Neat Cutting Oil 500 ml

Excision’s new XDP 905 Fluid for neat oil application continues the superior performance of the XDP 905 range. XDP905 is a high performance neat oil for medium and severe cutting operations (milling, grinding, drilling, tapping, broaching and general cutting on automatic lathes).

XDP905 Paste

Neat Cutting Paste

XDP905 Paste is a high-performance neat product for medium and severe cutting operations (drilling, tapping, cutting, etc.). It is suitable to machine ferrous and non ferrous metals. XDP 905 Paste provides exceptional film strength, adhesion and extreme pressure properties.

83905-200

200g

Tube with brush

XDP905 Foam

Neat Cutting Foam 440g

POWERGUN™ HIGH PERFORMANCE

LI-ION GREASE GUN

PG450

• Continuous flow with an output up to 150g/m

• Suitable for greases up to NLGI no2

• Supplied with 2 x 3Ah Li-ion batteries, charger, 1m long flexible extension an KY Supergrip coupler

P3 POWERLUBE™

20KG GREASE KIT

P3-01C

• Supplied with P3001 (50:1 air operated grease pump, lid, follower 4m grease hose and B2 Booster gun

• Maximum pump output pressure: 51,700kPa (7,500psi)

• Maximum gun output pressure: 68,900kPa (10,000psi)

• Grease viscosity up to

NLGI No.2

• Air inlet: 1/4” NPT (F)

• Pump outlet: 1/4” NPT (F)

LUBEMATE POLY DIESEL TANK

• Pump Free flow rate - 40l/m

• Voltage - 12V

• Duty Cycle - 30min

• Hose length - 4m x 3/4”

• Available in 200L and 400L

• Automatic nozzle

• Lockable lid for security

AR320R-01

• Hose Size - 3/8”x 20m

• Hose Type - Compressed Air

• Inlet/Outlet - 3/8”/ 1/4” BSP

• Pressure Rating - 275 psi.

• Hose Material - Rubberised reinforced PVC

AR420R-01

• Hose Size - 1/2”x 20m

MULTI-PURPOSE

GEAR OIL PUMP

C7-01

• Compatible fluids - kerosene, two stroke mix, lubricating oils up to SAE140

• Pump output: 100ml/stroke

• Compatible with most drum sizes from 15-25L

ALL PURPOSE OIL TRANSFER PUMP

MAOP20

• Suitable for oils up to SAE140 / ISO680 viscosity

• Delivers up to 75ml per stroke, viscosity dependant

• Suits between 20L - 25L drums via suction tube extender

RAPIDFLO ROTARY FUEL PUMP

GT-01

• Suitable for 205L drums

• Delivers 800ml per revolution (Up to 100L/min)

• Suitable for use with Diesel, ULP, Kerosene, and lubrication oils up to SAE30

LUBEMATE POLY ADBLUE/DEF TANK 200LTR

L-PABT200

• Tank Capacity - 200ltr

BOP20 STARTER KIT

20L EXTRA BATTERY

BP20S-OLA-XB

• Suitable for oils up to SAE75/W90

• 18V rechargeable 2.0Ah battery delivers up to 105L

• Delivery rate - Up to 3.5L/min

• Battery - 2.0Ah Li-Ion

• Extra Battery

FOOT OPERATED 10KG

BUCKET PUMP GREASE

C/W HOSE & COUPLER

K8-01

• Grease Capacity - 10kg

• Output Pressure - Up to 8700psi

• Per stroke - 2g

• Suitable for greases up to NLGI no2

• Pump Free flow rate - 26l/m

• Hose length - 4m x 3/4”

• Duty Cycle - 30min

• Lockable lid for security

• Hose Type - Compressed Air

• Inlet/Outlet - 3/8”/3/8” BSP

• Pressure Rating - 275 psi.

• Hose Material - Rubberised reinforced PVC

RETRACTA R3 COMPRESSED

AW420B-01

• Hose Size - 1/2”x 20m

• Hose Type - Compressed Air/Water

• Inlet/Outlet - 3/8”/ 3/8” BSP

• Pressure Rating - 250 psi.

• Hose Material - Reinforced PVC

RETRACTA R3 COMPRESSED

AIR/WATER REEL

AW320B-01

• Hose Size - 3/8”x 20m

• Hose Type - Compressed Air/Water

• Inlet/Outlet - 3/8”/1/4” BSP

• Pressure Rating - 250 psi.

• Hose Material - Reinforced PVC

L-PDT400

L-PDT200

INDUSTRIAL QUALITY

52000

HR40030

Alemlube EL Series Air Hose Reel

• Supplied complete with 20m x 10mm ID PVC hose & 0.9m lead in hose

• Maximum working pressure of 300psi (20bar)

• 3/8" BSP(f) inlet/outlet

• Can be wall or ceiling mounted

• Detachable steel mounting bracket enables 180º hose reel rotation

DH180240

240V 205L/180kg Drum Heater

• Suits 205L oil drums & 180kg grease drums

• Heats viscous fluids to a pourable temperature

• Maximum operating temperature of 218ºC

• Dimensions of 1,740mm (L) x 125mm (W)

• B200 type thermostat

• 1,400mm long power cord & 3-pin plug

• Resistant to chemicals & weather conditions

• Rolls up after use for convenient storage

• Easy to clean

12V Diesel Refuelling Tank Kit

• Capable of fl ow rates of up to 50L/min

• Includes 4m of antistatic fuel delivery hose, 2m of battery cable, a stainless steel and brass fuel filter & a manual nozzle

• Maximum head capacity of 15m

• Self priming vane pump includes a built-in bypass

• Suction capacity of up to 2m

Also available: 52001

51039

1" Automatic Diesel Nozzle

• Can operate with fl ow rates of up to 120L/min

• 1" BSP(f) swivel included

• Suitable for applications involving an electric diesel transfer pump

• Automatically cuts off when a fuel tank is full

413080

Samoa Grease Control Valve with Rigid Extension & Z-Swivel

• Maximum working pressure of 7,150psi (500bar)

• 1/4" BSP(f) inlet thread

• 1/8" BSP(f) outlet thread

• Single shot or continuous fl ow option

• Rigid outlet with 3 jaw coupler

• Genuine high pressure performance reduces operator hand fatigue

600A

Lever Action Grease Gun

• Grease pressures of up to 12,000psi (828bar)

• Delivers up to 1.6g of grease per stroke

• 450g capacity

• Suitable for all grease grades up to NLGI3

• Ever-Flow System enables the use of thick/tacky greases

• 4 jaw coupler & rigid extension

• Three way loading

• Manufactured in Germany

L4674 / L4675 / L4676 Grease Nipple Assortment Kits

All grease nipples included in the kit are case hardened, fully chromated, zinc passivated, batch tested to 8,000psi (552bar) and conform to international standards including BSS 1486, DIN 71412, SAE J534 and JIS B1575

5060AN

Heavy Duty Hi-Flo

Refuelling Drum Pump

• Delivery rates of 1.1L per rotation

• Supplied complete with 2.6m of UV & fuel resistant hose, spout, in built spout holster, 3-piece downtube which suits 60L & 205L drums & IBC’s, and heavy duty bung adaptor

• Suitable for the transfer of diesel fuel, petrol, light oils up to SAE30 & kerosene

G10040N

Alemlube EL Series 18V Lithium-ion

Cordless Grease Gun

• Generates grease pressures of up to 10,000psi (690bar)

• Capable of delivering up to 80g/min

• Spare battery, recharger, 106cm long grease gun

flex & plastic moulded carry case supplied standard

• 25 minutes continuous working time

Rubber General Purpose Black Hose (A101)

General purpose black is made to handle many special purpose air and water applications. This quality versatile hose meets the requirements for the industrial, construction and agricultural markets where oil is not considered a significant factor. *Available in

to 25mm and available in

Rubber Hot Water Washdown Hose (A225)

This quality hose is used for cleaning food processing equipment in meat, poultry, confectionery and dairy plants. *Available in

Aluminium EconoCam 50mm Camlock Range

This reliable quick connect camlock coupling is used with hose, pipe, tubing and tanks conveying a wide variety of liquids, dry bulk materials and vapours including cooling water, fuels, chemicals, cosmetics, food products, adhesives, dyes, pharmaceuticals, pellets, slurries and much more.

*Camlocks also available in Stainless Steel, Brass and Polypropylene as well as other type configurations and sizes from 12mm to 150mm

Multi-purpose hose used in steel mills, shipyards, foundries, auto plants and construction industries. For conveying a wide range

BUCKLES (100 PACK)

Buckle For Single or Double Wrapped Band

• Available in CRNI - 304 Stainless Steel / CRNIMO - 316 Stainless Steel

TORRO® HOSE CLAMPS

NEW! 41 PIECE GRAB KITS

The benchmark Worm Drive Hose Clamp

• Size range: 8mm to 60mm Ø

• Available in Galvanised Steel (W1) or Stainless Steel AISI 403 (W3)

NORMAFIX® PLAIN BANDING

TIGHTENING & CUTTING TOOL

Specifically designed to tighten and cut banding and pre-form clamps in the field or workshop.

For the correct installation of all One & Two Ear Clamps

SERH-50F 08385200037

JOCKEY WHEELS

Richmond’s range of jockey wheels are ideal for use on trailers, caravans, campers, boat trailers, and various other trailers.

YOUR NUMBER ONE CHOICE FOR WHEELS, CASTORS, AND MORE

1000 SERIES CASTORS

GAS BOTTLE TROLLEY

MIGHTY TOUGH HAND TROLLEYS

Mitre table suitable for grinding ends square and adjusting lengths and angles

Welding fumes – fine metal particles produced through welding that can be breathed in – have been classified as carcinogenic. This means employers in mining and other industries where welding takes place must make sure workers are protected, for example by installing welding fume extractors.

Flexovit Maxx Ultra Thin Cut Off Wheels

• Premium Grade NorZon® Plus grain

• Ultra thin fast cut reinforced straight wheel for fast cutting off where minimal material loss is required

• For cutting of stainless steel, ally steels, cast iron, tool steels & hard ferrous metals

Norton NorZon Slotted Fibre Disc F827

• Blend of ceramic alumina & patented zirconia alumina abrasives for fast, aggressive cutting on stainless and low carbon steels

• Advanced self-lubricating grain treatment for reduced heat and loading on hard-to-grind materials

Bear-Tex Rapid Blend Flap Discs

• Layered flaps of surface conditioning material are ideal for quick durable blending and finishing of uneven surfaces

• Ideal for cleaning and light de-burring work on TIG-weld seams on stainless steel •

flap and fibre discs in the blending and finishing process

PVC Duct Tape

• Made from PVC to provide excellent stretch, conformability and durability

• For use on a wide variety of applications in the home, office, industry and garden

• Strong adhesive for quick and reliable attachment

Flexovit, Norton and Bear are registered trademarks of Saint-Gobain Abrasives Pty. Ltd.

CY Series Spread Cylinders

• Used for many tasks in confined situations

• Use for spreading dies, flange spreading and more.

• Operate with any 700 bar pump

CY1501 15T Spread Cylinder

• 15T Capacity, lightweight and ergonomic tool

• Designed for pipe and flange repair & maintenance

• Required access gap of only 5mm

• Maximum spread 47mm

• Can be operated by any 700 bar pump

• Options include Safety Block and Handle

CA1014 Maintenance Set

• 10T capacity

• Includes carry / storage case

$4726.36 $5199.00

$2899.09 $3189.00

• Versatile set of attachments for pushing, pulling and clamping

• Includes spreader ram

• Other rams can be added later to expand its capabilities.

Includes: MIG Torch 4m H/ Duty /Earth Lead 3m / Gas Regulator / Drive Rollers for Steel & Gasless / 10A plug

• 210A max output

• Synergic or manual MIG controls

• 10mm steel max MIG capacity

• 2-in-1 10A or 15A input

• 26+ MIG Programs - for welding with different wires

Includes: TIG Torch #26

8m / Earth Lead 4m / Stick Lead 4m / Gas Regulator / Long 3m Power Lead / Parts Kit & Tungstens / Large Carry Bag

• 200A max output (TIG)

• 3.2mm max Tungsten size

• 15A 240V

• Weighs only 8kg - compact, robust & lightweight

• LCD Digital Controls

• 3 year warranty*

PLATINUM LT40 “HANDYFLAME” LPG Burner Torch Kits

Handle + 750mm Tube + Ø65mm Tip + 3m Hose + Cylinder Adaptor Output up to 500mj/hr, torch length 1m, ideal where maximum flame size/ power is required, operates on full bottle pressure

• Made in Europe, industrial quality & robust heavy-duty design

• Unique hose/handle swivel connection, eliminates hose torsion/twisting & improves operator comfort

• Air/LPG operation requires LPG gas only (no oxygen required)

• Use with 4/9/45kg LPG bottles with standard POL connection

• On/off/control needle valve

Includes: MIG Torch 4m

H/Duty /Earth Lead 4m H/ Duty / Stick Lead 4m

H/Duty / Gas Regulator / Drive Rollers for Steel & Gasless

• 200A max output

• 10mm steel max MIG capacity

• 15A 240V

• Takes 5kg (D200mm) or 15kg (D300mm) spools •

Includes: MIG Torch 3m

H/Duty /Earth Lead 3m / Stick Lead 3m / Gas Regulator / Drive Rollers for Steel & Gasless

• 180A max output

• 8mm steel max MIG capacity

• 10A 240V

• Takes 1kg or 5kg spools

• Digital Readout Displays

• Robust Drive Systemfor reliable wirefeeding •

PLATINUM Oxy/Acetylene

PLATINUM Oxy/LPG Kit with Flashback Arrestors

• Heavy duty Platinum Series - no quality shortcuts

• Complete kit for Oxy/Acetylene gas cutting & brazing

• 12 month warranty on regulators, blowpipe handle and cutting attachment

• Bonus combination circle/roller guide

• Heavy duty Platinum Series - no quality shortcuts

• Complete kit for Oxy/LPG (Oxy/ Propane) gas cutting & brazing

• 12 month warranty on regulators, blowpipe handle and cutting attachment

• Bonus combination circle/roller guide

MIG/Stick/TIG

201T AC/DC Pulse TIG