SHOWER EXPERIENCE CATALOGUECATALOGUE

SHOWER EXPERIENCE

¿WHAT INFORMATION THEY OFFER YOU OUR TABLES?

The price list is a useful and comprehensive tool for creating your shower space. On the pages of this catalogue you will find all the information needed to choose your screen and other elements of the shower, whether it is a standard product or an adapted tailormade to your special needs.

The boards of each series of enclosures will give you reports from:

Name of the series.

Configuration.

Features of the enclosures.

Sketch for the choice of the measurement.

Partition boards in stock.

Low partition board order

Informational Icons

Measurements: indicating the minimum size and maximum in which such a screen, i.e. your level of compensation

Height: total measurement of the screen, with all its elements

Access: indicates the useful step offered by that Screen Size

Finish: indicates the completion of the Profiles

Packaging: number of boxes it comes in Product Content

The following icons are designed to make it easy and get Quick information about our products.

Along with this information, you will also find the general information of the screen model (type of glass, if it is reversible or not, anti-limescale treatment...) and also the technical drawing of the chosen configuration where the dimensions are indicated shown in the table. A set of information that will make it easier to choose your screen with full guarantees and satisfaction.©

¿HOW MEASURE YOUR ENCLOSURE?

Support Base Level

Check the level of the base of the screen

It is also recommended that you verify that the base where you are The support is correctly leveled. To do this, you can use a “bubble” type. The fact that there are certain small slopes does not imply a major problem for enclosures that have framed structure, but in the partitions that have few profiles and especially in those that do not have profiles compensation is essential to check the perfect framing and leveling of the base with the walls.

FOR CORNER ENCLOSURES

· Floor or ground shower tray?

· In any case, the two sides are measured from the wall to the edge of the shower tray.

· In cases of a tray on the floor, the screen it is always somewhat smaller than the total dimension of the shower trays. E.g.: Helsinki, cod. 22465, nominal measurements of plate 700x900, screen measurements 675-695 and 875-895mm.

FOR FRONT ENCLOSURES

Always make sure to measure twice

· For frontal installations, we must always measure the highest point (A), the midpoint (M), and the lowest point (B)

· Of the three measurements that we take A/M/B we we will keep the smallest one as a reference and we will offset to the largest size with the profile compensation

· Check if all 3 measurements are within the range of a reference of Salgar screen. Ex: Helsinki 22452, 136140cm. Ideally, you should discount 0.5cm to the size and check if they are all within range.

· In case any are not in range, it is ALWAYS THE GREATEST MEASURE that which is compensated by Compensating Profiles

· Ex: A is 139, M is 138.5 and B is 138cm. We discount 0.5 to B and we see that the maximum difference is 137.5 to 139cm, total 1.5cm, which is in the code range and that the offset of the screen, 2cm per side, covers the mismatch.

In the case of masonry of floor level tray. The enclosure, for aesthetics only, must fall at the plate and floor joint. We must measure the two measurements up to those joints and see if the screen fits them

FOR SEMI-CIRCULAR ENCLOSURES

· In addition to the measurements, check:

· Radio Roca (R500) or Italiano (R550).

· If any side of the shower is recessed or Oversized.

· Floor or work/floor shower tray.

IT IS A GUARANTEE OF QUALITY

At Salgar we use the highest quality in the manufacture of our products, this being endorsed on the basis of:

- International standard EN 14428, which sets requirements for shower enclosures, as well as by CE marking. Test carried out by the international organization TÜV Rheiland.

- European Construction Products Regulation No. 305/2011 - UNE EN 12150 Standard Glass for Building. Safety Sodalime Silicate Glass thermally tempered.

- Standard EN 14527:2016+A1:2019 Shower trays for domestic use.

- UNE-ENV 12633:2003 Standard Method for determining the value of resistance to Slipping of polished and unpolished floors.

Optimal enclosure properties

Corrosion resistance resistance to dry-wet change.

Durability and stability

Maximum watertightness

Easy cleaning

DECLARACIÓN DE PRESTACIONES (DoP) Documento N.º DoP Nº 06 De acuerdo con el Reglamento Europeo de Productos de Construcción Nº 305/2011 para el producto: PLATO DUCHA

1. Nombre y código de identificación de los productos: Plato Ducha. Descripción y códigos se encuentran en el Anexo de la presente declaración. 2. Tipo, código número de serie otro elemento, el cual identifique el producto de acuerdo con la disposición del Art. 11, párrafo 4: Véase en el Anexo de la presente declaración.

3. Nombre dirección del fabricante o importador o distribuidor de acuerdo con la disposición del Art. 11, párrafo 5: COMERCIAL SALGAR S.L. Autovía de Logroño, Km 9,5 50011 Zaragoza (España)

4. Uso del producto de acuerdo con la especificación armonizada, según lo designado por el fabricante: Higiene personal Uso doméstico.

5. Sistema o sistemas de evaluación y verificación de la constancia de las prestaciones del producto: Sistema 4. 6. Nombre dirección de contacto del Organismo Notificado: N/A. 7. Prestaciones declaradas: Características esenciales Prestaciones Especificaciones técnicas armonizadas Aptitud para la limpieza.

GENERAL TABLE OF FINISHES

Frame Moire

Transparente Satinado Fumé

Transparent

Gloss silver Matt black Satin

The range of RIOJA Shower trays incorporated by Salgar takes a leap in quality, breadth of range and design thanks to its Stone finish that guarantees superior anti-slip.

Maximum quality and features to configure your bathroom.

Shower trays with stone non-slip surface.

Maximum qualification with class 3 certificate

Lightened shower tray

Extra-flat chainrings 26-30 mm depending on widths

Resistant to light impacts

Easy cleaning, no harsh products

Includes shiny chrome stainless steel grille

Sanitary Gel Coat Coating

Anti-bacterial properties

700

800

800

800

800

800

800

800 X 1500 23567 545 23585 545 23603 545 82095 628

800 X 1600 23568 581 23586 581 23604 581 82096 666

800 X 1700 23569 593 23587 593

800

800

900

900

900

900

900

Shower trays / Thickness 28 mm

The Pompeya range of shower trays combines design, modernity, functionality and style.

Add a touch of design to your bathroom thanks to the tray’s design framing Pompeya

We adapt to your space:

You can choose a standard POMPEYA shower trays in white, sand and anthracite or customize the color to create a unique bathroom, selecting your favorite color from the RAL chart of colors.

To order these trays, indicate the COD of the chosen size and colour and indicate the RAL on the order if you choose this option.

81908 475 81936 475 81956 475 82113 565

700 X 1400 81909 492 81937 492 81957 492 82114 581

700 X 1500 81910 528 81938 528 81958 528 82116 617

700 X 1600 81911 577 81939 577 81959 577 82117 664

700 X 1700 81912 601 81940 601 81960 601 82118 688

700 X 1800 81913 625 81941 625 81961 625 82119 713

800 X 1000 81914 421 81943 421 81962 421 82120 508

800 X 1100 81915 445 81944 445 81963 445 82121 532

800 X 1200 81916 468 81945 468 81964 468 82122 557

800 X 1300 81917 524 81946 524 81965 524 82123 611

800 X 1400 81918 551 81947 551 81966 551 82124 640

800 X 1500 81919 587 81949 587 81967 587 82125 678

800 X 1600 81920 625 81950 625 81968

ATLAS

At SALGAR we have the target to provide the most practical, functional and aesthetic. Of the purpose of being a reference in bathroom equipment, the ATLAS wall cladding.

ATLAS wall cladding will turn your bathroom quickly, easily and economically in a new and Renovated space to enjoy. The ATLAS coating easily adheres to the tiles and walls with our high-quality specific adhesive resistance. The boards are made

1220 mm x 2550 mm,

SHOWER PANELS ATLAS

FOR GLOSSY ANODISED ALUMINIUM PANELS

1.

· Minimum water pressure 2.5 bars, recommended 3 bars, always at the entrance of the column and a maximum of 5 bar

· Minimum water flow of 15 to 17 liters/min.

· Normalised pipe diameter and hot water production.

· Pressure difference between hot and cold water not exceeding 1 bar.

· Thermostat temperature control according to the instructions In the product.

· Attention to possible pinching of the hoses before and after assembly.

· Be sure to purge your facility of any impurities.

· Periodically clean the thermostatic mixer filters.

· READ THE INSTALLATION MANUAL CAREFULLY..

Bottom tap, twist opening.

Shelf

[Heaven] [Heaven bath]

Anti-limescale treatment included

Anti-limescale treatment included

HEAVEN SERIES

Walk in shower

WALK IN SHOWER, STOCK

■ 8 mm tempered safety glass.

■ Anti-limescale treatment included.

■ Offset, 10 mm.

■ Reversible.

■ Tensor included.

■ Standard construction.

HEAVEN SERIES

Walk in shower

WALK IN SHOWER, BESPOKE

■ 8 mm tempered safety glass.

■ Anti-limescale treatment included.

■ Offset, 10 mm.

■ Reversible.

■ Tensor included.

■ Special construction.

NOTE: Screen printing options on page 28.

Optional accessories on page 34.

■ 8 mm

■ Anti-limescale treatment included.

■ Offset, 10 mm.

■ Reversible.

■ Tensor included.

■ Standard construction.

HEAVEN BLACK SERIES

Walk in

WALK IN SHOWER, BESPOKE

■ 8 mm tempered safety glass.

■ Anti-limescale treatment included.

■ Offset, 10 mm.

■ Reversible.

■ Tensor included.

■ Special construction.

Optional accessories on page 30

HEAVEN BLACK SERIES

Walk in

BESPOKE SHOWER ENCLOSURE WALK-IN WITH SCREEN PAINTING

Optional accessories on page 30

Walk in shower

WALK IN SHOWER WITH CORNER, STOCK

■ 8 mm tempered safety glass.

■ Anti-limescale treatment included.

■ Offset, 10 mm.

■ Reversible.

HEAVEN SERIES

Walk in shower

WALK IN SHOWER WITH CORNER, BESPOKE

■ 8 mm tempered safety glass.

■ Standard tempered glass finish, transparent, smoked, translucent, framed.

■ Art deco silk-screen printed glass 4

5 - 6 moiré and framed

■ Anti-limescale treatment included.

■ Offset, 10 mm.

■ Reversible.

■ Tensor included.

■ Special construction.

HEAVEN BLACK SERIES

Walk in WALK IN SHOWER WITH CORNER, STOCK

■ 8

■ Anti-limescale treatment included.

■ Offset, 10 mm.

■ Reversible.

■ Tensor included.

■ Standard construction.

HEAVEN SERIES

Walk in shower

WALK IN SHOWER WITH CORNER, BESPOKE

■ 8 mm tempered safety glass.

■ Anti-limescale treatment included.

■ Offset, 10 mm.

■ Reversible.

■ Tensor included.

■ Special construction.

HEAVEN BATH SERIES

Walk in bathtub

BESPOKE SPECIAL SIZE SHOWER ENCLOSURES WALK-IN

■ 8 mm tempered safety glass.

■ Art deco silk-screen printed glass 4 - 5 - 6

■ Anti-limescale treatment included.

■ Offset, 10 mm.

■ Reversible.

■ Tensor included.

■ Special construction.

■ Installation type, over bathtub

HEAVEN BATH SERIES

Hinged frontal bathtub

FRONT BATHTUB FOLDING ENCLOSURE, STOCK

■ 6 mm tempered safety glass.

■ silk-screen printed glass Rpad

■ Anti-limescale treatment included.

■ Opening system, hinged door 180º.

■ Reversible.

■ Installation type, over bathtub

[Clear]

Shower front

1 SLIDING DOOR / 1 FIXED, STOCK

■ 6 mm tempered safety glass.

■ Opening system, sliding door.

■ Closure type, overlap rubber seal.

■ Offset, 25 mm each side.

■ Reversible.

■ Double handle.

■ Standard construction.

■ Adjustable roller.

CLEAR SERIES

Bespoke front between walls

1 SLIDING DOOR / 1 FIXED, BESPOKE

■ 6 mm tempered safety glass.

■ Special tempered glass finish, transparent and smoked.

■ Opening system, sliding door.

■ Closure type, overlap rubber seal.

■ Offset, 50 mm front.

■ Reversible.

■ Double handle.

■ Special construction.

■ Adjustable roller.

Front with fixed side panel

1 SLIDING DOOR / 1 FIXED, STOCK

■ 6 mm tempered safety glass.

■ Opening system, sliding door.

■ Closure type, overlap rubber seal

■ Offset, 50 mm front 25 mm fixed side.

■ Reversible.

■ Double handle.

■ Special construction.

■ Adjustable roller.

CLEAR SERIES

Front with fixed side panel

1 SLIDING DOOR / 1 FIXED , BESPOKE

■ 6 mm tempered safety glass.

■ Special tempered glass finish, transparent and smoked.

■ Opening system, sliding door.

■ Closure type, overlap rubber seal.

■ Offset, 50 mm front 25 mm fixed side.

■ Reversible.

■ Double handle.

■ Adjustable roller.

Shower front

2 SLIDING DOORS / 2 FIXED, STOCK

■ 6 mm tempered safety glass.

■ Opening system, sliding door.

■ Closure type, magnetic rubber.

■ Offset, 50 mm front.

■ Doubles handles.

■ Adjustable roller.

Bespoke front between walls

2 SLIDING DOORS / 2 FIXED, BESPOKE

■ 6 mm tempered safety glass.

■ Opening system, sliding door.

■ Closure type, magnetic rubber.

■ Offset, 50 mm front.

■ Doubles handles.

■ Adjustable roller.

CLEAR SERIES

Front with fixed side panel

2 SLIDING DOORS / 2 FIXED WITH FIXED SIDE PANEL, STOCK

■ 6 mm tempered safety glass.

■ Opening system, sliding door.

■ Closure type, magnetic rubber.

■ Offset, 50 mm front 25 mm fixed side.

■ Doubles handles.

■ Adjustable roller.

CLEAR SERIES

Front with fixed side panel

2 SLIDING DOORS / 2 FIXED WITH FIXED SIDE PANEL, BESPOKE

■ 6 mm tempered safety glass.

■ Opening system, sliding door.

■ Closure type, magnetic rubber.

■ Offset, 50 mm front 25 mm fixed side.

■ Doubles handles.

■ Adjustable roller.

CLEAR SERIES

Corner shower screen

2 SLIDING DOORS / 2 FIXED, STOCK

■ 6 mm tempered safety glass.

■ Opening system, sliding door.

■ Closure type, magnetic rubber.

■ Offset, 25 mm each side.

■ Reversible.

■ Doubles handles.

■ Adjustable roller.

Corner shower screen

2 SLIDING DOORS / 2 FIXED, BESPOKE

■ 6 mm tempered safety glass.

■ Opening system, sliding door.

■ Closure type, magnetic rubber.

■ Offset, 25 mm each side.

■ Reversible.

■ Doubles handles.

■ Adjustable roller.

Semicircular shower screen

SEMICIRCULAR SHOWER ENCLOSURE WITH TWO DOORS AND TWO FIXED SECTIONS, SOTCK

■ 6 mm tempered safety glass.

■ Opening system, sliding door.

■ Closure type, magnetic rubber.

■ Offset, 25 mm each side.

■ Reversible.

■ Adjustable roller.

DOUCHESHOWER

[Versa]

Shower enclosure in stock

Shower enclosure per order

VERSA SERIES

Gloss silver front between walls in stock

FC2 SLIDING DOOR/FIXED PANEL

■ 6 mm tempered safety glass.

■ Anti-limescale treatment included.

■ Type of closure, metal profile and 90º magnetic rubber seal.

■ 20 mm compensation for wall unevenness.

■ 20 + 20 mm margin of adaptation.

■ Reversible.

■ Easy cleaning system. Door release push button.

■ Double height regulation bearings +2 -2 mm.

■ Lower rubber seal flashing.

■ Double handle.

■ 6 mm tempered safety glass.

■ Anti-limescale treatment included.

■ Screen printing corresponds to digital printing with a gradient according to the selected RAL

■ Type of closure, metal profile and 90º magnetic rubber seal.

■ 20 mm compensation for wall unevenness.

■ 20 + 20 mm margin of adaptation.

■ Reversible for Fumé finish.

■ Easy cleaning system. Door release push button.

■ Double height regulation bearings +2 -2 mm.

■ Lower rubber seal flashing.

■ Double handle.

VERSA SERIES

Black front between walls in

FC2 SLIDING DOOR/FIXED PANEL

■ 6 mm tempered safety glass.

■ Anti-limescale treatment included.

■ Type of closure, metal profile and 90º magnetic rubber seal.

■ 20 mm compensation for wall unevenness.

■ 20 + 20 mm margin of adaptation

■ Reversible.

■ Easy cleaning system. Door release push button.

■ Double height regulation bearings +2 -2 mm.

■ Lower rubber seal flashing.

■ Double handle.

Black front between walls

SLIDING DOOR/FIXED PANEL

■ 6 mm tempered safety glass.

■ Anti-limescale treatment included.

■ Screen printing corresponds to digital printing with a gradient according to the selected RAL

■ Type of closure, metal profile and 90º magnetic rubber seal.

■ 20 mm compensation for wall unevenness.

■ 20 + 20 mm margin of adaptation.

■ Reversible for Fumé finish.

■ Easy cleaning system. Door release push button.

■ Double height regulation bearings +2 -2 mm.

■ Lower rubber seal flashing.

■ Double handle.

■ 6 mm tempered safety glass.

■ Anti-limescale treatment included.

■ Type of closure, 90º magnetic rubber seals.

■ 20 / 20 mm compensation for wall unevenness.

■ 20 + 20 / 20 mm margin of adaptation.

■ Reversible.

■ Easy cleaning system. Door release push button.

■ Double height regulation bearings +2 -2 mm.

■ Lower rubber seal flashing.

■ Double handle.

■ 6 mm tempered safety glass.

■ Anti-limescale treatment included.

■ Screen printing corresponds to digital printing with a gradient according to the selected RAL

■ Type of closure, 90º magnetic rubber seals.

■ 20 / 20 mm compensation for wall unevenness.

■ 20 + 20 / 20 mm margin of adaptation.

■ Reversible for Fumé finish.

■ Easy cleaning system. Door release push button.

■ Double height regulation bearings +2 -2 mm.

■ Lower rubber seal flashing.

■ Double handle.

■ 6 mm tempered safety glass.

■ Anti-limescale treatment included.

■ Type of closure, 90º magnetic rubber seals.

■ 20 / 20 mm compensation for wall unevenness.

■ 20 + 20 / 20 mm margin of adaptation.

■ Reversible.

■ Easy cleaning system. Door release push button.

■ Double height regulation bearings +2 -2 mm.

■ Lower rubber seal flashing.

■ Double handle.

■ 6 mm tempered safety glass.

■ Anti-limescale treatment included.

■ Screen printing corresponds to digital printing with a gradient according to the selected RAL

■ Type of closure, 90º magnetic rubber seals.

■ 20 / 20 mm compensation for wall unevenness.

■ 20 + 20 / 20 mm margin of adaptation.

■ Reversible for Fumé finish.

■ Easy cleaning system. Door release push button.

■ Double height regulation bearings +2 -2 mm.

■ Lower rubber seal flashing.

■ Double handle.

■ 6 mm tempered safety glass.

■ Anti-limescale treatment included.

■ Type of closure, metal profile and 90º magnetic rubber seal.

■ 20 / 20 mm compensation for wall unevenness.

■ Margin of adaptation 20 + 20 / 20 mm.

■ Reversible.

■ Easy cleaning system. Door release push button.

■ Double height regulation bearings +2 -2 mm.

■ Lower rubber seal flashing.

■ Double handle.

■ 6 mm tempered safety glass.

■ Anti-limescale treatment included.

■ Screen printing corresponds to digital printing with a gradient according to the selected RAL

■ Type of closure, metal profile and 90º magnetic rubber seal.

■ 20 / 20 mm compensation for wall unevenness.

■ Margin of adaptation 20 + 20 / 20 mm.

■ Reversible for Fumé finish.

■ Easy cleaning system. Door release push button.

■ Double height regulation bearings +2 -2 mm.

■ Lower rubber seal flashing.

■ Double handle.

■ 6 mm tempered safety glass.

■ Anti-limescale treatment included.

■ Type of closure, metal profile and 90º magnetic rubber seal.

■ 20 / 20 mm compensation for wall unevenness.

■ Margin of adaptation 20 + 20 / 20 mm.

■ Reversible.

■ Easy cleaning system. Door release push button.

■ Double height regulation bearings +2 -2 mm.

■ Lower rubber seal flashing.

■ Double handle.

VERSA SERIES

■ 6 mm tempered safety glass.

■ Anti-limescale treatment included.

■ Screen printing corresponds to digital printing with a gradient according to the selected RAL

■ Type of closure, metal profile and 90º magnetic rubber seal.

■ 20 / 20 mm compensation for wall unevenness.

■ Margin of adaptation 20 + 20 / 20 mm.

■ Reversible for Fumé finish.

■ Easy cleaning system. Door release push button.

■ Double height regulation bearings +2 -2 mm.

■ Lower rubber seal flashing.

■ Double handle.

VERSA SERIES

Gloss silver front between walls in stock

FC3 SLIDING DOOR/FIXED PANEL/ FIXED PANEL IN LINE

■ 6 mm tempered safety glass.

■ Anti-limescale treatment included.

■ Type of closure, overlap rubber seal.

■ 20 + 20 mm compensation for wall unevenness.

■ 20 + 20 mm margin of adaptation.

■ Reversible.

■ Easy cleaning system. Door release push button.

■ Double height regulation bearings +2 -2 mm.

■ Lower rubber seal flashing.

■ Double handle.

■ 6 mm tempered safety glass.

■ Anti-limescale treatment included.

■ Screen printing corresponds to digital printing with a gradient according to the selected RAL

■ Type of closure, overlap rubber seal.

■ 20 + 20 mm compensation for wall unevenness.

■ 20 + 20 mm margin of adaptation.

■ Reversible for Fumé finish.

■ Easy cleaning system. Door release push button.

■ Double height regulation bearings +2 -2 mm.

■ Lower rubber seal flashing.

■ Double handle.

VERSA SERIES

Black front between walls in stock

FC3 SLIDING DOOR/FIXED PANEL/ FIXED PANEL IN LINE

■ 6 mm tempered safety glass.

■ Anti-limescale treatment included.

■ Type of closure, overlap rubber seal.

■ 20 + 20 mm compensation for wall unevenness.

■ 20 + 20 mm margin of adaptation.

■ Reversible.

■ Easy cleaning system. Door release push button.

■ Double height regulation bearings +2 -2 mm.

■ Lower rubber seal flashing.

■ Double handle.

■ 6 mm tempered safety glass.

■ Anti-limescale treatment included.

■ Screen printing corresponds to digital printing with a gradient according to the selected RAL

■ Type of closure, overlap rubber seal.

■ 20 + 20 mm compensation for wall unevenness.

■ 20 + 20 mm margin of adaptation.

■ Reversible for Fumé finish.

■ Easy cleaning system. Door release push button.

■ Double height regulation bearings +2 -2 mm.

■ Lower rubber seal flashing.

■ Double handle.

■ 6 mm tempered safety glass.

■ Anti-limescale treatment included.

■ Type of closure, overlap rubber seal.

■ 20 / 20 mm compensation for wall unevenness.

■ 20 + 20 / 20 mm margin of adaptation.

■ Reversible.

■ Easy cleaning system. Door release push button.

■ Double height regulation bearings +2 -2 mm.

■ Lower rubber seal flashing.

■ Double handle.

VERSA SERIES

■ 6 mm tempered safety glass.

■ Anti-limescale treatment included.

■ Screen printing corresponds to digital printing with a gradient according to the selected RAL

■ Type of closure, overlap rubber seal.

■ 20 / 20 mm compensation for wall unevenness.

■ 20 + 20 / 20 mm margin of adaptation.

■ Reversible for Fumé finish.

■ Easy cleaning system. Door release push button.

■ Double height regulation bearings +2 -2 mm.

■ Lower rubber seal flashing.

■ Double handle.

■ 6 mm tempered safety glass.

■ Anti-limescale treatment included.

■ Type of closure, overlap rubber seal.

■ 20 / 20 mm compensation for wall unevenness.

■ 20 + 20 / 20 mm margin of adaptation.

■ Reversible.

■ Easy cleaning system. Door release push button.

■ Double height regulation bearings +2 -2 mm.

■ Lower rubber seal flashing.

■ Double handle.

VERSA SERIES

■ 6 mm tempered safety glass.

■ Anti-limescale treatment included.

■ Screen printing corresponds to digital printing with a gradient according to the selected RAL

■ Type of closure, overlap rubber seal.

■ 20 / 20 mm compensation for wall unevenness.

■ 20 + 20 / 20 mm margin of adaptation.

■ Reversible for Fumé finish.

■ Easy cleaning system. Door release push button.

■ Double height regulation bearings +2 -2 mm.

■ Lower rubber seal flashing.

■ Double handle.

Gloss

2 SLIDING DOORS 2 FIXED PANELS

■ 6 mm tempered safety glass.

■ Anti-limescale treatment included.

■ Type of closure, 90º magnetic rubber seals.

■ 20 + 20 mm compensation for wall unevenness.

■ 20 + 20 mm margin of adaptation.

■ Reversible.

■ Easy cleaning system. Door release push button.

■ Double height regulation bearings +2 -2 mm.

■ Lower rubber seal flashing.

■ Double handle.

■ 6 mm tempered safety glass.

■ Anti-limescale treatment included.

■ Screen printing corresponds to digital printing with a gradient according to the selected RAL

■ Type of closure, 90º magnetic rubber seals.

■ 20 + 20 mm compensation for wall unevenness.

■ 20 + 20 mm margin of adaptation.

■ Reversible.

■ Easy cleaning system. Door release push button.

■ Double height regulation bearings +2 -2 mm.

■ Lower rubber seal flashing.

■ Double handle.

■ 6 mm tempered safety glass.

■ Anti-limescale treatment included.

■ Type of closure, 90º magnetic rubber seals.

■ 20 + 20 mm compensation for wall unevenness.

■ 20 + 20 mm margin of adaptation.

■ Reversible.

■ Easy cleaning system. Door release push button.

■ Double height regulation bearings +2 -2 mm.

■ Lower rubber seal flashing.

■ Double handle.

VERSA SERIES

Black front between walls

FC4 2 SLIDING DOORS 2 FIXED PANELS

■ 6 mm tempered safety glass.

■ Anti-limescale treatment included.

■ Screen printing corresponds to digital printing with a gradient according to the selected RAL

■ Type of closure, 90º magnetic rubber seals.

■ 20 + 20 mm compensation for wall unevenness.

■ 20 + 20 mm margin of adaptation.

■ Reversible.

■ Easy cleaning system. Door release push button.

■ Double height regulation bearings +2 -2 mm.

■ Lower rubber seal flashing.

■ Double handle.

■ 6 mm tempered safety glass.

■ Anti-limescale treatment included.

■ Type of closure, 90º magnetic rubber seals.

■ 20 / 20 mm compensation for wall unevenness.

■ 20 + 20 / 20 mm margin of adaptation.

■ Reversible for Fumé finish.

■ Easy cleaning system. Door release push button.

■ Double height regulation bearings +2 -2 mm.

■ Lower rubber seal flashing.

■ Double handle.

■ 6 mm tempered safety glass.

■ Anti-limescale treatment included.

■ Screen printing corresponds to digital printing with a gradient according to the selected RAL

■ Type of closure, 90º magnetic rubber seals.

■ 20 / 20 mm compensation for wall unevenness.

■ 20 + 20 / 20 mm margin of adaptation.

■ Reversible for Fumé finish.

■ Easy cleaning system. Door release push button.

■ Double height regulation bearings +2 -2 mm.

■ Lower rubber seal flashing.

■ Double handle.

■ 6 mm tempered safety glass.

■ Anti-limescale treatment included.

■ Type of closure, 90º magnetic rubber seals.

■ 20 / 20 mm compensation for wall unevenness.

■ 20 + 20 / 20 mm margin of adaptation.

■ Reversible for Fumé finish.

■ Easy cleaning system. Door release push button.

■ Double height regulation bearings +2 -2 mm.

■ Lower rubber seal flashing.

■ Double handle.

■ 6 mm tempered safety glass.

■ Anti-limescale treatment included.

■ Screen printing corresponds to digital printing with a gradient according to the selected RAL

■ Type of closure, 90º magnetic rubber seals.

■ 20 / 20 mm compensation for wall unevenness.

■ 20 + 20 / 20 mm margin of adaptation.

■ Reversible for Fumé finish.

■ Easy cleaning system. Door release push button.

■ Double height regulation bearings +2 -2 mm.

■ Lower rubber seal flashing.

■ Double handle.

Gloss silver corner shower enclosure in stock AC2 + AC2 SLIDING DOORS/FIXED PANELS 1/2

■ 6 mm tempered safety glass.

■ Anti-limescale treatment included.

■ Type of closure, 45º magnetic rubber seals.

■

■ 20 + 20 mm margin of adaptation.

■ Reversible.

■ Easy cleaning system. Door release push button.

■ Double height regulation bearings +2 -2 mm.

■ Lower rubber seal flashing.

■ Double handle.

AC2 + AC2 SLIDING DOORS/FIXED PANELS 1/2

■ 6 mm tempered safety glass.

■ Anti-limescale treatment included.

■ Screen printing corresponds to digital printing with a gradient according to the selected RAL

■ Type of closure, 45º magnetic rubber seals.

■ 20 / 20 mm compensation for wall unevenness.

■ 20 + 20 mm margin of adaptation.

■ Reversible for Fumé finish.

■ Easy cleaning system. Door release push button.

■ Double height regulation bearings +2 -2 mm.

■ Lower rubber seal flashing.

■ Double handle.

For Satin and Screen print finishes please inform on which side fixed panel is positionated.

VERSA SERIES

Black corner shower enclosure in stock

AC2 + AC2 SLIDING DOORS/FIXED PANELS 1/2

■ 6 mm tempered safety glass.

■ Anti-limescale treatment included.

■ Type of closure, 45º magnetic rubber seals.

■ 20 / 20 mm compensation for wall unevenness.

■ 20 + 20 mm margin of adaptation.

■ Reversible.

■ Easy cleaning system. Door release push button.

■ Double height regulation bearings +2 -2 mm.

■ Lower rubber seal flashing.

■ Double handle.

See access tables on page 130

See combinations tables on page 138

Black corner shower enclosure

AC2 + AC2 SLIDING DOORS/FIXED PANELS 1/2

■ 6 mm tempered safety glass.

■ Anti-limescale treatment included.

■ Screen printing corresponds to digital printing with a gradient according to the selected RAL

■ Type of closure, 45º magnetic rubber seals.

■ 20 / 20 mm compensation for wall unevenness.

■ 20 + 20 mm margin of adaptation.

■ Reversible for Fumé finish.

■ Easy cleaning system. Door release push button.

■ Double height regulation bearings +2 -2 mm.

■ Lower rubber seal flashing.

■ Double handle.

For Satin and Screen print finishes please inform on which side fixed panel is positionated.

109917 109921 + 109918 109921 + 109919 109921 + 109920 109921 + 109921 109921 + 109922 109921 + 109923 109921 + 109924 109921 + 109925

950 109922

+ 110039 110041 + 110040 110041 + 110041

+ 109829 109827 + 109830 109827 + 109831 109827 + 109832 109827 + 109833 109827 + 109834 109827 + 109835 750 109828 + 109827 109828 + 109828 109828 + 109829 109828 + 109830 109828 + 109831 109828 + 109832 109828 + 109833 109828 + 109834 109828 + 109835 800 109829 + 109827 109829 + 109828 109829 + 109829 109829 + 109830 109829 + 109831 109829 + 109832 109829 + 109833 109829 + 109834 109829 + 109835

850 108930 + 109827 108930 + 109828 108930 + 109829 108930 + 109830 108930 + 109831 108930 + 109832 108930 + 109833 108930 + 109834 108930 + 109835

900 109831 + 109827 109831 + 109828 109831 + 109829 109831 + 109830 109831 + 109831 109831 + 109832 109831 + 109833 109831 + 109834 109831 + 109835

950 109832 + 109827 109832 + 109828 109832 + 109829 109832 + 109830 109832 + 109831 109832 + 109832 109832 + 109833 109832 + 109834 109832 + 109835

1000 109833 + 109827 109833 + 109828 109833 + 109829 109833 + 109830 109833 + 109831 109833 + 109832 109833 + 109833 109833 + 109834 109833 + 109835 1150 109834

DARE WITH COLOUR

Match RAL screen printing with the bathroom furniture

[Helsinki]

Shower front

1 SLIDING DOOR / 1 FIXED

■ 6 mm tempered safety glass.

■ Opening system, sliding door.

■ Closure type, bubble rubber.

■ Offset, 40 mm front 20 mm fixed side.

■ Reversible, except glass with silk-screen printing.

■ Easy cleaning system

■ Adjustable roller.

HELSINKI SERIES

Bespoke front between walls

1 SLIDING DOOR / 1 FIXED, BESPOKE

■ 6 mm tempered safety glass.

■ Opening system, sliding door.

■ Closure type, bubble rubber.

■ Offset, 40 mm front 20 mm fixed side.

■ Reversible, except glass with silk-screen printing.

■ Easy cleaning system

■ Adjustable roller.

Front with side panel

1 SLIDING DOOR / 1 FIXED + FIXED SIDE PANEL

■ 6 mm tempered safety glass.

■ Opening system, sliding door.

■ Closure type, bubble rubber.

■ Offset, 40 mm front 20 mm fixed side.

■ Reversible, except glass with silk-screen printing.

■ Easy cleaning system

■ Adjustable roller.

HELSINKI SERIES

Bespoke front with side panel

1 SLIDING DOOR / 1 FIXED + FIXED SIDE PANEL

■ 6 mm tempered safety glass.

■ Opening system, sliding door.

■ Closure type, bubble rubber.

■ Offset, 40 mm front 20 mm fixed side.

■ Reversible, except glass with silk-screen printing.

■ Height: 1500 - 2000 mm.

■ Adjustable roller.

HELSINKI

SERIES

Shower front

2 SLIDING DOORS / 2 FIXED

■ 8 mm tempered safety glass.

■ Opening system, sliding door.

■ Closure type, magnetic rubber.

■ Offset, 20 mm each side.

■ Handles included.

■ Easy cleaning system

■ Adjustable roller.

HELSINKI SERIES

Bespoke front between walls

2 SLIDING DOORS / 2 FIXED

■ 8 mm tempered safety glass.

■ Opening system, sliding door.

■ Closure type, magnetic rubber.

■ Offset, 20 mm each side.

■ Easy cleaning system

■ Adjustable roller.

DIGITAL SCREEN PRINTING

Corner

2 SLIDING DOORS / 2 FIXED

■ 6 mm tempered safety glass.

■ Opening system, sliding door.

■ Closure type, magnetic rubber.

■ Offset, 20 mm each side.

■ Reversible.

■ Easy cleaning system.

■ Adjustable roller.

Recommended options for our range of shower trays

HELSINKI SERIES

Corner shower screen

2 SLIDING DOORS / 2 FIXED

■ 6 mm tempered safety glass.

■ Opening system, sliding door.

■ Closure type, magnetic rubber.

■ Offset, 20 mm each side.

■ Reversible.

■ Easy cleaning system

■ Adjustable roller.

<700

DIGITAL SCREEN PRINTING

[Reikiavik]

This series is an excellent product, proof of These are the International Design Awards received by its handle.

Shower front

1 SLIDING DOOR / 1 FIXED

■ 8 mm tempered safety glass.

■ Anti-limescale treatment included.

■ Opening system, sliding door.

■ Offset, 15 mm.

■ Reversible.

■ Fixed crossover / sliding 80 mm.

of

Please check that the frame or base of your plate allows you to measure A mandatory tensioner to choose for each frontage

on the plate for its

REIKIAVIK SERIES

Front with side panel

1 SLIDING DOOR / 1 FIXED + FIXED SIDE PANEL

■ 8 mm tempered safety glass.

■ Anti-limescale treatment included.

■ Opening system, sliding door.

■ Closure type, magnetic rubber.

■ Offset, 15 mm each side.

■ Reversible.

■ Fixed crossover / sliding 80 mm.

For each front a tensioner is required

This screen, as it has lower bearings, requires 6 cm. of space on the tray for its installation, please check that the frame or the base of your shower tray is suitable for this measure

Corner shower

2 SLIDING DOORS / 2 FIXED

■ 8 mm tempered safety glass.

■ Anti-limescale treatment included.

■ Opening system, sliding door.

■ Offset, 15 mm each side.

■ Reversible.

■ Fixed crossover / sliding 80 mm.

For each front a tensioner is required

This screen, as it has lower bearings, requires 6 cm. of space on the tray for its installation, please check that the frame or the base of your shower tray is right for this measurement. Magnetic kit with angle gutter included, mandatory

REIKIAVIK SERIES

Choose your screen shower and combine it with the tensionerr that best suits your space.

Front screen shower composed of straight stabilishing bar (pag 162)

Front screen shower composed of angle stabilishing bar (pag 162)

Angle screen shower composed of a front panel, with straight stablishing bar and fixed side panel. (pag 164)

panel, with straight stabilishing bar and fixed side panel. (pag 164) Required tensioners

Angle

Angle screen shower composed of 2 front panels, with angle stabilishing bar and angle magnetic kit (pag 166)

Connetor for 2 tensioners. Only for angle screen showers

[Habitat]

■

■ Anti-limescale

■

■

■ Offset, 20 mm each side.

■ Reversible.

HABITAT SERIES

frontal with fixed side panel

PIVOT HINGED DOOR + IN LINE FIXED PANEL

■ 6 mm tempered safety glass.

■ Anti-limescale treatment included.

■ Opening system, hinged door 90º.

■ Closure type, magnetic profile.

■ Offset, 20 mm front 20 mm fixed side.

■ Reversible.

■ Tensor included in fixed in linea side.

PIVOT HINGED DOOR

■ 6 mm tempered safety glass.

■ Anti-limescale treatment included.

■ Opening system, hinged door 90º.

■ Closure type, magnetic profile.

■ Offset, 30 mm each side.

■ Reversible.

HABITAT SERIES

Black silver front with fixed side panel

PIVOT HINGED DOOR WITH FIXED SIDE PANEL

■ 6 mm tempered safety glass.

■ Anti-limescale treatment included.

■ Opening system, hinged door 90º.

■ Closure type, magnetic profile.

■ Offset, 30 mm front 15 mm fixed side.

■ Reversible.

[Malmö]

Shower front

PIVOT HINGED DOOR

■ 6 mm tempered safety glass.

■ Anti-limescale treatment included.

■ Opening system, exterior / interior 180º.

■ Closure type, magnetic profile included.

■ Offset, 20 mm front.

■ Reversible.

Shower front

PIVOT HINGED DOOR, STANDARD

■ 6 mm tempered safety glass.

■ Anti-limescale treatment included.

■ Opening system, exterior / interior 180º.

■ Closure type, magnetic profile included.

■ Offset, 20 mm front.

■ Reversible.

MALMÖ SERIES

frontal with fixed side panel

PIVOT HINGED DOOR WITH FIXED SIDE PANEL

■ 6 mm tempered safety glass.

■ Anti-limescale treatment included.

■ Opening system exterior 90º.

■ Closure type, magnetic rubber.

■ Offset, 20 mm front 20 mm fixed side.

■ Reversible.

■ Tensor included in fixed side.

■ 6 mm tempered safety glass.

■ Anti-limescale treatment included.

■ Opening system exterior 90º.

■ Closure type, magnetic rubber.

■ Offset 20 + 20 mm.

■ Reversible.

■ Tensor included.

[Odense]

ODENSE SERIES

Shower front

HINGED / FOLDING DOOR

■ 6 mm tempered safety glass.

■ Anti-limescale treatment included.

■ Opening system, hinged folding door.

■ Closure type, magnetic profile.

■ Offset, 20 mm front.

■ Reversible.

■ Handles included.

OPTIONAL FRONT IN BETWEEN WALLS, 4 PANELS

For this composition 2 profiles (cod.83628) of 40mm have been added to each side to get the right size

ODENSE SERIES

frontal with fixed side panel

HINGED / FOLDING DOOR + IN LINE FIXED PANEL

■ 6 mm tempered safety glass.

■ Anti-limescale treatment included.

■ Opening system, hinged folding door.

■ Closure type, magnetic profile.

■ Offset, 20 mm front 20 mm fixed side.

■ Reversible.

■ Handles included.

2 FOLDING DOORS

■ 6 mm tempered safety glass.

■ Anti-limescale treatment included.

■ Opening system, hinged door 90º.

■ Closure type, magnetic profile.

■ Offset, 20 mm front 20 mm fixed side.

■ Reversible.

■ Handles included.

Combinations for angular Odense collection of two fronts

ADDITIONAL FITTING PROFILES

PARTS LIST

If you need a spare part of any of our screen showers, due to loss or damage, please follow the instructions below to find it easily and place your order.

PASOS A SEGUIR

On our website www.salgar.net click on Shower screens Select any model and size from that series to to get into the product-specific screen

Please select below the screen series for which you need a spare part (e.g. Helsinki Series).

Once on this page, at the bottom you will find a menu with download options where you will find the option “Spare parts list”.

Once you have opened or downloaded the pdf file, you will be able to see every single configurations of the selected collection. Choose the exact configuration (frontal, angular...) and identify in the drawing of the screen shower the spare part you need. This number indicates, in the attached table, the product code that you should order.

ANGLE

RECTANGULAR

RECTANGULAR

BEARING HELSINKI 6 MM

ANTI-ROLL HELSINKI

ASSAMBLY SET HELSINKI FRONT

BUBBLE JOINT FOR DOOR CLOSING

TRANSPARENT SLIDING GLASS HELSINKI

HANDLE HELSINKI

40 x 80 2000 MATT BLACK Adapt your Salgar shower enclosure to the exact dimensions of your bathroom. AFTER SALES SERVICE

RECTANGULAR

RECTANGULAR

RECTANGULAR PIPE

RECTANGULAR PIPE

RECTANGULAR

RECTANGULAR PIPE

Our Technical Assistance Department is at your disposal to solve any incident as soon as possible.