Capmatic Packaging Solutions
High Precision Peristaltic Pump Liquid Filling Solution
Steelheart Peristaltic Pump
➢ Fill volumes:
• 0.01 ml to 1,000 ml
➢ Filling accuracy expectation*:
• ± 2% (for 0.5 ml to 5 ml)
• ± 1% (for 5ml to 15 ml)
• ± 0.5% (over 15 ml)
High precision volumetric dosage pump
Speed up to 35 BPM
Meets or exceed cGMP regulation
➢ Utilities:
➢ 220Volts
➢ Three phase + Neutral
➢ 60/50Hz
➢ 10 to 25 amp
➢ Air at 100 PSI (6.9 bar)
• Air consumption 20 CFM (566 L/m)
➢ Special requests available
Suitable for ISO 5, Class A & B condition in the pharmaceutical industries
Built in accordance with of North American standards (UL)
Additional Features
➢ Disposable fluid path alleviating cross contamination
➢ Accepts broad range of tube materials and sizes
➢ Servo driven pump
➢ Complete stainless steel 316L construction
➢ Complies with cGMP-US FDA regulations
➢ Fully adapted for clean room environments
➢ Dual offset stainless-steel rollers to alleviate pulsation
➢ Drip prevention feature “suck back”
Capmatic’s Steelheart accepts any tubing available on the market
From 0.5mm ID to 12mm ID
Patented self-adjusting tube clamping mechanism
Optional Features
Auto-Compensation
➢ Extend your tubes duration of use
➢ Better plan for downtime
This feature will continuously monitor your filling accuracy via a load cell in order to alert system’s owner of any deviation. As inaccurate fill volumes get automatically rejected, the pump will auto-calibrate and automatically compensate for the low/over fill so production can proceed without interruption or operator intervention.
➢ Monitor and accumulate wear and tear data for your tube replacement schedule
Optional Features
Pump Cart
➢ Pump carts are supplied with a minimum of 4 pumps and go up to 16
➢ Pump carts are designed to be moveable, providing more space around the pumps for maintenance purposes.Also allowing for remote set-up, where in a multiple cart scenario, one cart can be in production while the next one is being staged for next production batch
➢ Capmatic’s pump carts are self-sufficient, meaning that they come with their own HMI and PLC logic to be used without being connected to a filling system, for testing or for manual small batch production
➢ Can be integrated to any filling system (3rd parties acceptable)
Optional Features
Steelheart Bench SH-1500
112 – SH Bench
– Intrepid
– Bambino
198 – SH-1500