Fall Protection Rental Catalogue

FALL PROTECTION RENTAL CATALOGUE

Pg. 1

CALL 1-800-477-5732 OR EMAIL SERVICE@FALLCON.CA FOR YOUR FALL ARREST / CONFINED SPACE AND RENTAL REQUIREMENTS

221 HOLIDAY INN DRIVE, CAMBRIDGE ON N3C 3T2 PHONE: 1-800-477-5732 FAX: 1-519-651-1663 EMAIL: SERVICE@FALLCON.CA

TABLE OF CONTENTS

Pg. 1

Pg. 1

Table of Contents

Pg. 2

General Q&A Benefits of Rental vs Ownership Disclaimer

Pg. 3

Miller MightyLite Self-Retracting Lifelines

Pg. 4

Miller MightEvac Self-Retracting Lifelines with Emergency Retrieval Hoist

Pg. 5

Miller Rope Grabs

Pg. 6

Miller Titan II Harnesses & Lanyards

Pg. 7

Miller DuraHoist Portable Confined Space Systems

Pg. 8

Product Listing

Pg. 9

Product Listing

Pg. 10

Product Listing

Pg. 11

Product Listing

Pg. 12

Product Listing

Pg. 13

Rental Agreement

Pg. 14

Our Commitment Non-Destructive Testing Inspection Services Installation Services

CALL 1-800-477-5732 OR EMAIL SERVICE@FALLCON.CA FOR YOUR FALL ARREST / CONFINED SPACE AND RENTAL REQUIREMENTS

221 HOLIDAY INN DRIVE, CAMBRIDGE ON N3C 3T2 PHONE: 1-800-477-5732 FAX: 1-519-651-1663 EMAIL: SERVICE@FALLCON.CA

GENERAL Q&A Q: What is the difference between Visual inspection and recertification in fall protection?

A: Inspection is typically a visual process performed prior to use and on a periodic basis. Recertification is a process which typically involves engineering review of the original design, load testing and other activities in order to “certify” a system.

Q :Can I write on my Harness / Lanyard?

A: The “Sharpie” brand of felt-tip marking pens from Sanford, Inc. uses a type of permanent ink that will not cause deterioration to nylon and polyester webbing. This is the only brand of marker that DuPont has tested and approved.

Q: Is there a expiration date for my harness and/or lanyard?

A: CSA standards require that the user remove the equipment from service if it has been subject to the forces of arresting a fall.

There is no expiry date for Fall Arrest items, They also states that when inspection reveals defects in, damage to, or inadequate maintenance of equipment, the equipment shall be permanently removed from service or undergo adequate corrective maintenance before return to service.

Q: How often should I inspect my gear?

A: Any using fall protection equipment must inspect their gear per the user manual instructions prior to each use, is it also required that a competent person other than the user complete a thorough inspection of the product at least annually and record the results.

Q: Is there a specific height at which point fall protection is required?

A: This depends upon province; Alberta - 3.0 m; BC - 3.0 m; MB - 3.0 m; NL - 3.05 m; NB - 3.0 m; NS - 3.0 m; NT/NU - 3.0 m; Ontario: (Construction, Industry, Mining, Window Washing): 3.0 m; PE - 3.0 m; QC - 3.0 m; SK - 3.0 m; YU - 3.0 m.

BENEFITS OF RENTAL VS OWNERSHIP • • • • • • • • • • •

No annual certification costs – CSA Z259 standards Reduce Capital expenditure Current Models Technical Support Minimize cost / costly breakdowns No Maintenance costs Eliminates storage costs Versatility - Ability to match equipment with specific job application Frequency of need vs ownership 24/7 Emergency Service/Support Field Service / Troubleshooting

DISCLAIMER Section 26.2(1) of the Construction Projects Regulation requires employers on construction projects to ensure workers are adequately trained on the use of a fall protection system if they may use the system on the job. These workers must be given adequate oral and written instructions by a competent person.

Requirements for training and instruction under subsection 26.2(1) of the Construction Projects Regulation must be completed, in addition to an approved working at heights training program. It covers aspects specific to each work site or construction project.

Employers also have a general duty under clause 25(2)(a) of the OHSA to provide information, instruction and supervision to a worker to protect the health and safety of the worker.

Pg. 2

CALL 1-800-477-5732 OR EMAIL SERVICE@FALLCON.CA FOR YOUR FALL ARREST / CONFINED SPACE AND RENTAL REQUIREMENTS

221 HOLIDAY INN DRIVE, CAMBRIDGE ON N3C 3T2 PHONE: 1-800-477-5732 FAX: 1-519-651-1663 EMAIL: SERVICE@FALLCON.CA

Miller MightyLite™ Self-Retracting Lifelines Miller MightyLite™ Self-Retracting Lifelines ■ FEATURES TER THAN H IG L % 0 3 Q Corrosion-resistant stainless steel and aluminum U P TO ODTELHSAN EM IV IT housing components and housing extend T ■ FEATURES E P M E O T C 30% LIGH R service life Q Corrosion-resistant stainless steel and aluminum U P TO ODELS Q No annual factory recertification required* M E IV IT housing components and housing extend T E COMP *Except in Canada where the Canadian Standards Association

requires annual service life factory recertification.

Q Rated to 310-lbs. kg) capacity No annual factory(140.6 recertifi cation required* *Except in Canada where the Canadian Standards Association Q Carabiner and tagline included** requires annual factory recertification.

Q Rated Available in 20-ft.(140.6 (6 m),kg) 30-ft.

(9 m), Q to 310-lbs. capacity 50-ft. (15 m), 65-ft. (20 m), 100-ft. (30 m), Q 130-ft.

Carabiner and tagline included** (40 m) and 175-ft. (53 m) lengths Q Available in 20-ft. (6 m), 30-ft. (9 m), 50-ft. (15 m), 65-ft. (20 m), 100-ft. (30 m), SKU 130-ft. (40 m) and 175-ft. (53 m) lengths

RL20G-Z7/20FT

RL50P-Z7/50FT RL175G-Z7/175FT

RL20G-Z7/20FT

RL50P-Z7/50FT

Description

RL175G-Z7/175FT

Length

Weight

Length 20-ft. (6 m) 20-ft. (6 m) 30-ft. (9 m) 50-ft. m) 20-ft. (15 (6 m) 50-ft. m) 20-ft. (15 (6 m) 65-ft. m) 30-ft. (20 (9 m) 100-ft.

50-ft. (15(30m)m) 130-ft.

50-ft. (15(40m)m) 175-ft.

65-ft. (20(53m)m)

Weight 12 lbs. (5.4 kg) 11 lbs. (5.0 kg) 14 lbs. (6.4 kg) 22 lbs. (10.0 kg) 12 (5.4 kg) 21 lbs. (9.5 11 (5.0 kg) kg) 30 lbs. (10.4 kg) 14 (6.4 kg) 53 lbs. (24.0 22 (10.0 kg) kg) 56 kg) 21 lbs. (25.4 (9.5 kg) 70 lbs. (31.8 30 (10.4 kg) kg)

100-ft. (30 m) 20-ft. (6(40 m)m) 130-ft.

20-ft. m)m) 175-ft.(6(53 20-ft. (6 m) 30-ft.

20-ft. (9 (6 m) m) 30-ft.

20-ft. (9 (6 m) m) 50-ft. (15 m) 20-ft.

(6 m) 50-ft. m) 30-ft. (15 (9 m) 50-ft. m) 30-ft. (15 (9 m) 65-ft.

50-ft. (20 (15 m) m) 65-ft.

50-ft. (20 (15 m) m) 100-ft.(15(30m)m) 50-ft.

100-ft.

65-ft. (20(30m)m) 130-ft.(20(40m)m) 65-ft.

130-ft.

100-ft. (40 (30 m) m) 175-ft. (53 100-ft.

(30 m) m) 175-ft.

130-ft. (53 (40 m) m)

53 lbs. (24.0 kg) 11 56 lbs. (5.0 (25.4kg) kg) 12 70 lbs. (5.4 (31.8kg) kg) 12 lbs. (5.4 kg) 14 lbs. (6.4 11 (5.0 kg) kg) 14 lbs. (6.4 12 (5.4 kg) kg) 19 lbs. (8.6 12 (5.4 kg) kg) 20 lbs. (9.1 14 (6.4 kg) kg) 21 lbs. (9.5 14 (6.4 kg) kg) 24 lbs. (10.9 kg) 19 (8.6 kg) 24 lbs. (10.9 kg) 20 (9.1 kg) 54 kg) 21 lbs. (24.5 (9.5 kg) 54 lbs. (24.5 24 (10.9 kg) kg) 56 24 lbs. (25.4 (10.9 kg) kg) 56 lbs. (25.4 54 (24.5 kg) kg) 70 54 lbs. (31.8 (24.5 kg) kg) 70 lbs. (31.8 56 (25.4 kg) kg)

Q MILLER MIGHTYLITE SELF-RETRACTING LIFELINES ANSI Z359 SKU Description RL20G-Z7/20FT Galvanized wire rope (3/16-in. [5 mm] ) w/tagline & carabiner Polyester webbing (1-in. [25 mm] ) w/tagline & carabiner QRL20P-Z7/20FT MILLER MIGHTYLITE SELF-RETRACTING LIFELINES RLS30G-Z7/30FT Galvanized wire rope (3/16-in. [5 mm] ) w/tagline & carabiner CSA-Z259.2.5-17 ANSI Z359 RL50G-Z7/50FT [5 mm] mm] ) w/tagline & carabiner RL20G-Z7/20FT Galvanized wire rope (3/16-in. [5 RL50P-Z7/50FT [25 mm] mm] ) w/tagline & carabiner RL20P-Z7/20FT Polyester webbing (1-in. [25 RL65G-Z7/65FT Galvanized wire rope (3/16-in. [5 [5 mm] mm] ) w/tagline & carabiner RLS30G-Z7/30FT RL100G-Z7/100FT [5 mm] mm] ) w/tagline & carabiner RL50G-Z7/50FT Galvanized wire rope (3/16-in. [5 RL130G-Z7/130FT Galvanizedwebbing wire rope (3/16-in. ) w/tagline & carabiner RL50P-Z7/50FT Polyester (1-in.

[25 mm][5) mm] w/tagline & carabiner RL175G-Z7/175FT RL65G-Z7/65FT Galvanized wire rope (3/16-in. [5 [5 mm] mm] ) w/tagline & carabiner ANSI A10.32 RL100G-Z7/100FT RL20P/20FT RL130G-Z7/130FT RL20G/20FT RL175G-Z7/175FT RL20SS/20FT CSA-Z259.2.5-17 ANSI A10.32 RLS30G/30FT RL20P/20FT RLS30S/30FT RL20G/20FT RL50P/50FT RL20SS/20FT RL50G/50FT RLS30G/30FT RL50SS/50FT RLS30S/30FT RL65G/65FT RL50P/50FT RL65SS/65FT RL50G/50FT RL100G/100FT RL50SS/50FT RL100SS/100FT RL65G/65FT RL130G/130FT RL65SS/65FT RL130SS/130FT RL100G/100FT RL175G/175FT RL100SS/100FT RL175SS/175FT RL130G/130FT

Galvanized wire rope (3/16-in. [5 mm] ) w/tagline & carabiner [25 mm][5) mm] w/tagline & carabiner Polyester (1-in.

Galvanizedwebbing wire rope (3/16-in. ) w/tagline & carabiner Galvanized wire rope (3/16-in. [5 mm] ) w/tagline & carabiner Stainless steel wire rope (3/16-in. [5 mm] ) w/tagline & carabiner Galvanizedwebbing wire rope (3/16-in. ) w/tagline & carabiner [25 mm][5) mm] w/tagline & carabiner Polyester (1-in.

Stainless steel (3/16-in.

[5 mm] ) w/tagline & carabiner Galvanized wirewire roperope (3/16-in.

[5 mm] ) w/tagline & carabiner Polyester steel webbing mm] ) w/tagline & carabiner Stainless wire (1-in. rope [25 (3/16-in.

[5 mm] ) w/tagline & carabiner Galvanized wire rope (3/16-in. [5 [5 mm] mm] ) w/tagline & carabiner Stainless steel wire rope (3/16-in. [5 [5 mm] mm] ) w/tagline & carabiner Galvanizedwebbing wire rope (3/16-in. ) w/tagline & carabiner Polyester (1-in.

[25 mm][5) mm] w/tagline & carabiner Stainless steel (3/16-in.

[5 mm] ) w/tagline & carabiner Galvanized wirewire roperope (3/16-in.

[5 mm] ) w/tagline & carabiner Galvanized wirewire roperope (3/16-in.

[5 mm] ) w/tagline & carabiner Stainless steel (3/16-in.

[5 mm] ) w/tagline & carabiner Stainless steel (3/16-in.

[5 mm] ) w/tagline & carabiner Galvanized wirewire roperope (3/16-in.

[5 mm] ) w/tagline & carabiner Galvanized wirewire roperope (3/16-in.

[5 mm] ) w/tagline & carabiner Stainless steel (3/16-in.

[5 mm] ) w/tagline & carabiner Stainless steel (3/16-in.

[5 mm] ) w/tagline & carabiner Galvanized wirewire roperope (3/16-in.

[5 mm] ) w/tagline & carabiner Galvanized wirewire roperope (3/16-in.

[5 mm] ) w/tagline & carabiner Stainless steel (3/16-in.

[5 mm] ) w/tagline & carabiner Stainless steel (3/16-in.

[5 mm] ) w/tagline & carabiner Galvanized wirewire roperope (3/16-in.

[5 mm] ) w/tagline & carabiner

RL130SS/130FT wire (3/16-in.

[5 mm] ) w/tagline & carabiner 130-ft.

(40 m) 56 steel lbs. swivel (25.4 kg) **Available without the tagline andStainless carabiner. steel To order, addrope a “B” to the corresponding model number (Ex: RL20BP/20FT). Also available with a stainless steel swivel top and stainless snap (64 mm) hook. To order, add an “S” to corresponding model number RL20SS-S/20FT).

Snap& Hook – 3/4-in. (19 mm) gate opening; Locking Rebar Hook – 2-1/2-in.

RL175G/175FT Galvanized wire rope(Ex:(3/16-in.

[5 mm] )Locking w/tagline carabiner 175-ft. (53 m) gate opening.

70 lbs. (31.8 kg) RL175SS/175FT Stainless steel wire rope (3/16-in. [5 mm] ) w/tagline & carabiner 175-ft. (53 m) 70 lbs. (31.8 kg)

Miller MightyLite Swivel Brackets

**Available without the tagline and carabiner. To order, add a “B” to the corresponding model number (Ex: RL20BP/20FT). Also available with a stainless steel swivel top and stainless steel swivel snap hook. To order, add an “S” to corresponding model number (Ex: RL20SS-S/20FT). Locking Snap Hook – 3/4-in. (19 mm) gate opening; Locking Rebar Hook – 2-1/2-in. (64 mm) gate opening.

Swivel bracket reduces webbing or cable wear and increases worker mobility. Applications

include leading MightyLite edge deck construction, warehouse pickers, bridge construction, steel Miller Swivel Brackets erection and industrial. Constructed of corrosion-resistant, heavy-duty zinc-plated steel

Swivel bracket reduces webbing or cable wear increases worker mobility.units.

Applications and stainless steel, the swivel bracket is easy to and retrofi t on existing MightyLite include leading edge deck construction, warehouse pickers, bridge construction, steel erection heavy-duty zinc-plated steel SKU and industrial. Constructed of corrosion-resistant, Description 9082 and stainless steel, the swivel bracket is easy to retrofi t on existing MightyLite CALL 1-800-477-5732 OR EMAIL SERVICE@FALLCON.CA FOR YOUR units.

FALL ARREST / CONFINED SPACE AND RENTAL REQUIREMENTS Pg. 3 Q MILLER MIGHTYLITE SWIVEL BRACKETS 9082 Swivel bracket (retrofit) for 20-ft. (6 m) & 30-ft. (9 m) MightyLite units SKU Description 9083 Swivel bracket (retrofit) for 50-ft. (15 m) & 65-ft. (20 m) MightyLite units Q MILLER MIGHTYLITE SWIVEL BRACKETS 9082 Swivel bracket (retrofit) for 20-ft. (6 m) & 30-ft. (9 m) MightyLite units

9082

221 HOLIDAY INN DRIVE, CAMBRIDGE ON N3C 3T2 PHONE: 1-800-477-5732 FAX: 1-519-651-1663 EMAIL: SERVICE@FALLCON.CA

Miller MightEvac® Self-Retracting Lifelines with Emergency Retrieval Hoist

ACTORY F L A U N N A O N ION ECERTIFICAT R Miller MightEvac Self-Retracting Lifelines combine the superior performance and reliability of the best-selling REQUIRED MightyLite Self-Retracting Lifeline Series with a quick-activating retrieval mechanism for emergency evacuation.

■ FEATURES Q No annual factory recertification required* Q 20% lighter than competitive models Q Promotes quick and easy rescue with a 4:1 mechanical advantage (average speed of 25-ft. [8 m] per minute) Q – 310-lbs. (140.6 kg) working capacity – 400-lbs. (181.4 kg) working capacity when used with SofStop shock absorber pack (928LS/18INYL) Q For emergency evacuation only

MR100GB-Z7/100FT

Q Corrosion-resistant stainless steel/aluminum components Q Convenient, heavy-duty carrying handle

MR50GCM-Z7/50FT

Q Available in galvanized or stainless steel wire rope and Kevlar rope in lengths of 50-ft. (15 m), 100-ft. (30 m) and 130-ft. (40 m). Kevlar rope models in lengths of 40-ft. (12 m) MR40K/40FT, and 80-ft. (24 m) MR80K/80FT. *Does not apply to Canada due to CSA Z259.2.2-98 requirements. Must be inspected by a Miller authorized service center if involved in a fall or if fails user visual or function inspection.

SKU

Description

Q MILLER MIGHTEVAC SELF-RETRACTING LIFELINES W/EMERGENCY RETRIEVAL HOIST ANSI Z359 CSA-Z259.2.5-17 MR50GB-Z7/50FT MightEvac w/50-ft. (15 m) of 3/16-in. (4.8 mm) galvanized wire rope w/mounting bracket & pulley MR100GB-Z7/100FT MightEvac w/100-ft. (30 m) of 3/16-in. (4.8 mm) galvanized wire rope w/mounting bracket & pulley MR130GB-Z7/130FT MightEvac w/130-ft. (40 m) of 3/16-in. (4.8 mm) galvanized wire rope w/mounting bracket & pulley CSA-Z259.2.5-17 ANSI A10.32 MR50GB/50FT MightEvac w/50-ft. (15 m) of 3/16-in. (4.8 mm) galvanized wire rope w/mounting bracket & pulley MR50SB/50FT MightEvac w/50-ft. (15 m) of 3/16-in. (4.8 mm) stainless steel cable w/mounting bracket & pulley MR100GB/100FT MightEvac w/100-ft. (30 m) of 3/16-in. (4.8 mm) galvanized wire rope w/mounting bracket & pulley MR100SB/100FT MightEvac w/100-ft. (30 m) of 3/16-in. (4.8 mm) stainless steel cable w/mounting bracket & pulley MR130GB/130FT MightEvac w/130-ft. (40 m) of 3/16-in. (4.8 mm) galvanized wire rope w/mounting bracket & pulley MR130SB/130FT MightEvac w/130-ft. (40 m) of 3/16-in. (4.8 mm) stainless steel cable w/mounting bracket & pulley

Weight

39 lbs. (18 kg) 59 lbs. (27 kg) 64 lbs. (29 kg) 39 lbs. (18 kg) 39 lbs. (18 kg) 59 lbs. (27 kg) 59 lbs. (27 kg) 64 lbs. (29 kg) 64 lbs. (29 kg)

Miller Complete Confined Space Entry and Rescue Systems SKU

Pg.

Description

Q MILLER COMPLETE CONFINED SPACE SYSTEMS* CSA-Z1006-16 ANSI Z359 MR50GC-Z7/50FT MightEvac w/50-ft. (15 m) of 3/16-in. (4.8 mm) galvanized wire rope / 7-ft. (2 m) tripod / mounting bracket MR50GCM-Z7/50FT MightEvac w/50-ft. (15 m) of 3/16-in. (4.8 mm) galvanized wire rope / ManHandler Hoist w/65-ft. (20 m) of 3/16-in. (4.8 mm) galvanized wire rope / 7-ft. (2 m) tripod / mounting bracket MR100GC-Z7/100FT MightEvac w/100-ft. (30 m) of 3/16-in. (4.8 mm) galvanized wire rope / 7-ft. (2 m) tripod / mounting bracket MR130GC-Z7/130FT MightEvac w/130-ft. (40 m) of 3/16-in. (4.8 mm) galvanized wire rope / 7-ft. (2 m) tripod / mounting bracket ANSI A10.32 MR50GC/50FT MightEvac w/50-ft. (15 m) of 3/16-in. (4.8 mm) galvanized wire rope / 7-ft. (2 m) tripod / mounting bracket MR50GCM/50FT MightEvac w/50-ft. (15 m) of 3/16-in. (4.8 mm) galvanized wire rope / ManHandler Hoist w/65-ft. (20 m) of 3/16-in. (4.8 mm) galvanized wire rope / 7-ft. (2 m) tripod / mounting bracket MR50GX/50FT MightEvac w/50-ft. (15 m) of 3/16-in. (4.8 mm) galvanized wire rope / 9-ft. (2.7 m) tripod / mounting bracket MR50GXM/50FT MightEvac w/50-ft. (15 m) of 3/16-in. (4.8 mm) galvanized wire rope / ManHandler Hoist w/65-ft. (20 m) of 3/16-in. (4.8 mm) galvanized wire rope / 9-ft. (2.7 m) tripod / mounting bracket MR100GC/100FT MightEvac w/100-ft. (30 m) of 3/16-in. (4.8 mm) galvanized wire rope / 7-ft. (2 m) tripod / mounting bracket MR100GX/100FT MightEvac w/100-ft. (30 m) of 3/16-in. (4.8 mm) galvanized wire rope / 9-ft. (2.7 m) tripod / mounting bracket CALL 1-800-477-5732 OR EMAIL SERVICE@FALLCON.CA FOR YOUR FALL ARREST / CONFINED SPACE AND RENTAL REQUIREMENTS 4 MR130GC/130FT MightEvac w/130-ft. (40 m) of 3/16-in. (4.8 mm) galvanized wire rope / 7-ft. (2 m) tripod / mounting bracket MR130GX/130FT MightEvac w/130-ft. (40 m) of 3/16-in. (4.8 mm) galvanized wire rope / 9-ft. (2.7 m) tripod / mounting bracket *Confined Space Systems also include a pulley, carabiner and two heavy-duty equipment bags. For stainless steel wire rope, change the “G” to an “S” in the corresponding SKU number (Ex: MR50GC/50FT becomes MR50SC/50FT and MR130GC/130FT becomes MR130SC/130FT). Note: ManHandler Hoist only available in 65-ft. (20 m) and 100-ft. (30 m) lengths.

Miller MightEvac Unit Miller MightEvac Unit w/7-ft. (2 m) Tripod, Mounting Bracket w/9-ft. (2.7 m) Tripod Length of w/7-ft. (2 m) Tripod Wire Rope & Mounting Bracket & ManHandler Hoist & Mounting Bracket ANSI Z359 MR50GC-Z7/50FT – – 50-ft. (15 m) 100-ft. (30 m) MR100GC-Z7/100FT – – MR130GC-Z7/130FT – – 130-ft. (40 m) ANSI A10.32 MR50GC/50FT MR50GCM/50FT MR50GX/50FT 50-ft. (15 m) 100-ft. (30 m) MR100GC/100FT – MR100GX/100FT 130-ft. (40221 m) HOLIDAY MR130GC/130FT INN DRIVE, CAMBRIDGE–ON N3C 3T2 MR130GX/130FT

w/9-ft. (2.7 m) Tripod, Mounting Bracket & ManHandler Hoist – – – MR50GXM/50FT – –

Meets all applicable OSHA,FAX: ANSI and CSA standards. EMAIL: SERVICE@FALLCON.CA PHONE: 1-800-477-5732 1-519-651-1663

For stainless steel wire rope, change the “G” to an “S” in the corresponding model number (Ex: MR50GC/50FT becomes MR50SC/50FT).

Note: ManHandler Hoist is only available in 65-ft. (18 m) and 100-ft. (30 m) lengths.

Miller Rope Grabs Miller rope grabs move easily up and down vertical lifelines to provide continuous fall protection. Trailing models offer complete hands-free operation for increased productivity.

In the event of a fall, Miller rope grabs lock quickly. Compact design; corrosion-resistant stainless steel construction.

8175

8173

8175SLS-Z7/3FTYL

SKU CSA-Z259.14-01 ANSI Z359 8175-Z7/ 8175SLS-Z7/3FTYL ANSI A10.32 8172/U* 8173/U* 8174/U* 8174/C 8175/U* 8175/C

Description Trailing Rope Grab – Stainless steel trailing rope grab w/anti-panic feature for use with 5/8-in. (16 mm) rope Trailing Rope Grab – 8175-Z7/ with attached 3-ft. (1 m) SofStop shock-absorber for use with 5/8-in. (16 mm) rope Miller MicroLoc Trailing Rope Grab – Compact, stainless steel trailing wire rope grab for use with 5/16-in. (8 mm) wire rope Miller MicroLoc Trailing Rope Grab – Compact, stainless steel trailing rope grab for use with 5/8-in. (16 mm) rope Manual Rope Grab – Stainless steel manual rope grab for use with 5/8-in. (16 mm) or 3/4-in. (19 mm) synthetic rope Manual Rope Grab – Stainless steel manual rope grab w/anti-panic feature for use with 5/8-in. (16 mm) or 3/4-in. (19 mm) synthetic rope Trailing Rope Grab – Stainless steel trailing rope grab for use with 5/8-in. (16 mm) rope Trailing Rope Grab – Stainless steel trailing rope grab w/anti-panic feature for use with 5/8-in. (16 mm) rope

Note: Locking snap hook – 3/4-in. (19 mm) gate opening. Meets all applicable OSHA, ANSI and CSA Standards. *Does not meet CSA requirements.

VERTICAL LIFELINES

Standard lifeline lengths are 25 ft. (7.6 m), 50 ft. (15 m), 75 ft. (23 m), and 100 ft. (30 m); additional lengths are available.

SKU 194R-2 194R-5 195R-2 195R-5 300L

Description Nylon rope lifeline with carabiner & thimble; 5/8-in. (16 mm) diameter Polyester rope lifeline for greater chemical resistance with carabiner & thimble; 5/8-in. (16 mm) diameter Nylon rope lifeline with thimbles; 5/8-in. (16 mm) diameter Polyester rope lifeline for greater chemical resistance with thimbles; 5/8-in. (16 mm) diameter Polyester/polypropylene blend rope lifeline with locking snap hook & loop; 5/8-in. (16 mm) diameter

ACCESSORY ITEM SKU 913WLS/3FT

Description 3-ft. (1 m) nylon web lanyard w/SofStop shock absorber and two locking snap hooks

Note: Locking snap hook – 3/4-in. (19 mm) gate opening. Meets OSHA, ANSI A10.32 and CSA Standards.

Pg. 5

913WLS/3FT

CALL 1-800-477-5732 OR EMAIL SERVICE@FALLCON.CA FOR YOUR FALL ARREST / CONFINED SPACE AND RENTAL REQUIREMENTS

221 HOLIDAY INN DRIVE, CAMBRIDGE ON N3C 3T2 PHONE: 1-800-477-5732 FAX: 1-519-651-1663 EMAIL: SERVICE@FALLCON.CA

Features & Benefits Features & Benefits

• Easier vertical adjustability that stays invertical place, slip resistant that back • Easier adjustability D-ring andslip forward positioned stays inpad place, resistant back side D-rings, keeping your tool D-ring pad and forward positioned bagsD-rings, in the right placeyour tool side keeping

• Increased worksite safety with Hi-Viz color webbing and with • Increased worksite safety ANSI compliance Hi-VizZ359.11 color webbing and

• More comfort and better fit with strategically-placed • lighter, More comfort and better fit with paddingstrategically-placed that provides optimal lighter, airflow padding that provides optimal

compliance • ANSI QuickZ359.11 availability with in-stock items

airflow

• Quick availability with in-stock items

bags in the right place

The new economical Miller Titan™ II line of harnesses offers enhanced adjustability, improved comfort and ™ increased worksite safety. next generation of Titan harnesses from Honeywell Industrial is and an The new economical MillerThis Titan II line of harnesses offers enhanced adjustability, improved Safety comfort Features & Benefits affordable fall protection forgeneration the general manufacturing andIndustrial oil & gas (refinery) increased worksite safety.solution This next ofconstruction, Titan harnesses from Honeywell Safety is markets. an • Increased worksite safety with • More comfort and better fit with • Easier vertical adjustability that for the affordable fall protection solution general construction, manufacturing andcolor oil &webbing gas (refinery) markets.

Hi-Viz and lighter, strategically-placed stays in place, slip resistant back Back D-Ringthat Pad provides optimal ANSI Z359.11 compliance • Expanded Product Line padding D-ring pad and forward positioned Non-slip design allows back Back D-Ring Pad airflow Expanded Product Line • New Z359.11 Compliant • Quick availability with in-stock items sideANSI D-rings, keeping your tool D-Ring to stay in position Non-slip design allows back

bags in the right place New ANSI Z359.11 Compliant Maximum capacity D-Ring to stay in position Self-Contained Label Pack 400-lbs.

(181.4 kg) Maximum capacity Integrated pack encapsulates Self-Contained Label Pack labels, minimizing damage and loss 400-lbs. (181.4 kg) Integrated pack encapsulates The new economical Miller Titan™ II line of harnesses offers enhanced adjustability, improved comfort and labels, minimizing damage and loss NEW Vibrant, Pull-Free Lanyard Rings increased worksite safety.

This next generation of Titan harnesses from Honeywell Industrial Safety is an Hi-Viz Webbing: Attach lanyard when not in use NEW Vibrant, Lanyard Rings affordable fall protection solution for Pull-Free the general construction, manufacturing and oil & gas (refinery) markets. to minimize tripping hazards

• •

Hi-Viz Webbing:

Attach lanyard when not in use to minimize tripping hazards

Patented stretchable elastomer

• Expanded Product Line Patented stretchable elastomer • New ANSI Z359.11 Compliant • Maximum capacity 400-lbs. (181.4 kg)

Back D-Ring Pad Non-slip design allows back D-Ring to stay in position

Oversized ID Tags* Self-Contained Label Pack Quick and easy harness size identification Oversized ID Tags* Integrated pack encapsulates *Not included on T2000 models

Quick easy harness size identification labels,and minimizing damage and loss *Not included on T2000 models

NEW Titan™ IIVibrant, T-Flex Stretch Webbing Hi-Viz Webbing: ™ stretchable Patented elastomer

Friction Buckles Pull-Free Lanyard Rings

Titan II T-Flex Stretch Webbing

embedded into tough interwoven Patented stretchable elastomer webbing provides improved embedded into tough interwoven Patented elastomer comfort andstretchable greater mobility. webbing provides improved ™ ™ TITAN II NON-STRETCH comfort and greaterTITAN mobility.II NON-STRETCH

T2000/UAK

T4000/UAK

T2007/UAK

T4000FD/UAK

Easy tolanyard adjust, non-slip Attach when notdesign in use Friction Buckles to minimize tripping hazards Easy to adjust, non-slip design

TITAN™ II NON-STRETCH T4007/UAK

TITAN™ II NON-STRETCH T4500/UAK

TITAN™ II NON-STRETCH T4507/UAK

T4500FD/UAK

T4507FD/UAK

TF4007/UAK

TITAN™ II T-FLEX TF4500/UAK

TITAN™ II T-FLEX TF4507/UAK TF4500/UAK

TF4007FD/UAK

TF4500FD/UAK

Oversized ID Tags* Optional Front D-Ring T4007FD/UAK

Shown above T2000/UAK ™ Titan™ II T-Flex StretchTITAN Webbing II T-FLEX Titan™ II stretchable Non-Stretch Webbing Patented elastomer TF4000/UAK

embedded into toughwebbing. interwoven Durable, Titan™ IIlightweight Non-Stretch Webbing TF4000FD/UAK webbing provides improved Durable, lightweight webbing. comfort and greater mobility.

Shown above T4000/UAK

Quick andladder easy harness identification Used for climbing,size confined space, Optional Front D-Ring *Not included on T2000 models rescue or suspensionapplications Used for ladder climbing, confined space, rescue or suspensionapplications

Friction TITAN™ Buckles II T-FLEX

Easy to adjust, non-slip design

Shown above Optional Side D-Ring T4007/UAK Used for positioning or restraint Optional Side D-Ring

Shown above T4500/UAK

TITAN™ II CONTRACTOR T4577/UAK

Shown above TF4500/UAK T4507/UAK

Used for positioning or restraint

Optional Front D-Ring

Titan™ II Contractor TITAN™ II Titan™ II Contractor TITAN™ II Construction-Style Harness

Used for ladder climbing, confined space, rescue or suspensionapplications

NON-STRETCH T-FLEX Designed for more comfort Harness HARNESSConstruction-Style HARNESS and better fit with lighter, SKU

Designed more comfortWebbing Titan™ IIfor Non-Stretch strategically-placed padding and better fit with lighter, that provides optimal airflow Durable, lightweight webbing. strategically-placed padding while working atSKU heights. that provides optimal airflow while working at heights.

T2000/UAK

N/A

Titan™ II Contractor T4000FD/UAK TF4000FD/UAK

Back D-Ring

Integrated Back/Shoulder Pad

Removable Tool Belt

Double Slot Side D-Rings

Offers optimal airflow allowing

Stays in position when Removable Tool Belt disconnected, even when toolsinare attached Stays position when disconnected, even when tools are attached

Forward position allows for TF4500/UAK Double Side D-Rings tools to beSlot placed conveniently your side Forwardatposition allows for tools to be placed conveniently at your side

Integrated Pad for increasedBack/Shoulder comfort while carrying

FrontOffers optimal a fullSide load of tools airflow allowing Chest Strap for increased comfort while carrying D-Ring Buckles a fullD-Rings load of tools

Optional Side D-Ring

Yes

Used for positioning or restraint

Shoulder Strap Buckles

Leg Strap Buckles

Shoulder/Waist Removable Padding Tool Belt

No

No

Mating

N/A

Mating

No

No

Yes

Yes

No

Mating

Friction

Mating

No

No

Yes

Yes

Yes

Mating

Construction-Style Harness Designed for more comfort T4007FD/UAK TF4007FD/UAK and better fit with lighter, strategically-placed padding that provides optimal airflow while working at heights.

Pg. 6

Integrated Back/Shoulder Pad

Removable Tool Belt

Friction

Mating No Double Slot Side D-Rings

Offers optimal airflow allowing for increased comfort while carrying a full load of tools

Stays in position when disconnected, even when tools are attached

Forward position allows for tools to be placed conveniently at your side

No

CALL 1-800-477-5732 OR EMAIL SERVICE@FALLCON.CA FOR YOUR FALL ARREST / CONFINED SPACE AND RENTAL REQUIREMENTS

221 HOLIDAY INN DRIVE, CAMBRIDGE ON N3C 3T2 PHONE: 1-800-477-5732 FAX: 1-519-651-1663 EMAIL: SERVICE@FALLCON.CA

Miller DuraHoist™ Portable Confined Space Systems Miller DuraHoist Complete Four-Piece Hoist/Winch Systems TM

DuraHoist Complete Four-Piece Confined Space Systems consist of a One-Piece Adjustable Mast (DH-3/) and Three-Piece Portable Base (DH-4/).

Suggested applications: • Public Utilities: Vault and manhole entry, pump/lift/valve stations, water treatment and wastewater industries • General Industry (Food, Chemical, Pulp and Paper): Elevated manholes, storage tanks, platforms/mezzanines, underground vaults, clarifier tanks, pre-heaters

DH-1/

LIGHTWEEIGSHYTST, EM

VERSATIL

■ FEATURES

Q System breaks down into four lightweight aluminum components for easy storage, transport and set-up. No tools required for assembly.

Q Overall system height adjusts from 79 in. (2.01 m) to 100 in. (2.54 m)

Q Modular design allows the use of various fixed and portable bases and an optional mast with extensions.

Multiple winches and/or lifeline systems may be mounted as required.

SKU

Description

Weight

Q MILLER COMPLETE FOUR-PIECE HOIST/WINCH SYSTEMS DH-1/ Four-Piece System with ManHandler hoist/winch w/65-ft. (20 m) of 3/16-in. (4.76 mm) galvanized steel cable DH-2/ Four-Piece System without ManHandler hoist/winch

133.5 lbs. (60.6 kg) 91 lbs. (41.3 kg)

Portable and Fixed Base Options Miller Adjustable Mast Options All of the following bases are compatible all Adjustable Mast Options. base options include PVC liner. the need for Combining Lower Mast Extensions with thewith One-Piece Adjustable Mast or theAll Two-Piece Upper Mast eliminates custom-length masts. TheThree-Piece Upper Mast also provides additional solutions to height-restrictive applications.

Manhole Collar Adjustable Portable Base Barrel Mount Designed for MAST Q ONE-PIECE ADJUSTABLE MAST Q TWO-PIECE UPPER Q LOWER MAST Sleeve Three lightweight applications involving EXTENSIONS DH-21/ DH-3/ frequent set-ups over aluminum Designed for • Extensions provide shoring, the similarly-sized access components wall openings.

Simply slip for easy flexibility to changeand parapet • Compatible with any transport. one Lower • Two-piece upper mast collar into sewer manhole, tank hatchwith or Features adjustable aluminum screws and applications overallwhere mast frequent height set-up over Mast Extension is compatible m) other opening. Available from 17.5 in. (.44 a built-in level indicator for easy set-up varyingfrom wall41 thicknesses in. (1.04 m) is required. any two Lower Mast • Overall mast height adjusts to 27.5 in. (.70 m). on uneven surfaces.

No tools required wall m) thicknesses up to a to 146 in. (3.71 Extensions, not exceeding Accommodates DH-11/ for assembly.from 74 in. (1.88 m) to 89 in. (2.26 m) a combined 90 in. (2.29 m) max. of 24 in. (.61 m).

DH-4/ – Maximum 29-in. (.74 m)adjusts offset • Mast offset in height for the DH-21/ or DH-6/ DH-24 – Maximum 48-in.

(1.22(.30 m) offset from 12 in. m) 78 in. (1.98 m) for the DH-23 to 29 in. Floor (.74 m)Mount 12” 29” Wall Mount Core Mount Sleeve Sleeve Sleeve Mounts to horizontal Mounts to vertical Designed for slip-in SKU Description Weight concrete or steel concrete or steel installation into a structures. structures. Compact 4-in. (.10 m) diameter Q MILLER ADJUSTABLE MAST OPTIONS corekg)hole in concrete design creates DH-3/ One-Piece Adjustable Mast 29 lbs. (13.2 DH-7ZP/ or in an existing steel into work space.

29-in. (.74 intrusion m) Adjustable Offset Upper Mast 23 lbs.

(10.4structure. kg) DH-21/– Zinc-plated, mild steel 12-in. (.30 m) tominimal DH-7SS/ – Zinc-plated, mild steel DH-23 – Stainless steel 30-in. (.76 m) toDH-8ZP/ 48-in. (1.22 m) Adjustable Offset Upper Mast DH-8SS/ – Stainless DH-22/21 21-in. (.53 m) Lower Mast Extensionsteel DH-22/33 33-in. (.84 m) Lower Mast Extension Barrel Mount Sleeve Flush Floor Mount DH-22/45 45-in. (1.14 m) Lower Mast Extension w/3.5-in. (.09 m) Opening Sleeve DH-22/57 57-in. (1.45 m) Lower Mast Extension

Eight the potential Carrying bags are available.

Referindependent to the Miller DuraHoist Confined Space Safety Systems brochure atEliminates www.millerfallprotection.com.

clamping screws allow temporary installations over edges of shoring cans, walls and other structures.

DH-5/

trip hazard presented by other floor mount sleeves. Installs into a 4-in. (.10 m) diameter core hole in concrete or in an existing steel structure.

DH-20ZP/ – Zinc-plated, mild steel DH-20SS/ – Stainless steel

DH-9ZP/ – Zinc-plated, mildkg)steel 29 lbs. (13.2 DH-9SS/ – Stainless steel 14 lbs.

(6.4 kg)

17 lbs. (7.7 kg) Vehicle Hitch Mount 20 lbs. (9.1 kg) Sleeve 23 lbs. (10.4 kg)

Designed to install into a 2-in. (.05 m) receiver on an attendant vehicle to provide a portable anchor point for confined space entry/retrieval, rescue and fall arrest applications.

DH-12/ – Maximum 29-in. (.74 m) offset DH-25 – Maximum 48-in. (1.22 m) offset

Miller Accessories Pg. 7

SKU Description CALL 1-800-477-5732 ORDH-4WK/ EMAIL SERVICE@FALLCON.CA FOR YOUR FALL ARREST / CONFINED SPACEWeight AND RENTAL REQUIREMENTS

DH-18/

Q MILLER DURAHOIST EQUIPMENT CARTS DH-18/ Equipment Cart for DuraHoist Four-Piece Hoist System (DH-1/, DH-2/) DH-18DC/ Dust Cover for the DuraHoist Equipment Cart Q MILLER WHEEL KIT DH-4WK/ Wheel Kit (two wheels) for the DuraHoist Three-Piece Base (DH-4/)

40 lbs. (18.1 kg) 2 lbs. (.91 kg) 30 lbs. (13.6 kg)

PRODUCT LISTING SELF RETRACTING LIFELINES AND WINCHES PRODUCT #

BLACK RHINO Smallest and lightest 9 ft cable lifeline on the market. Comes with stainless steel wire rope. Ideal for concrete construction, welding, steel erection, food processing and warehouse applications.

CFL-4/9FT

BLACK RHINO 9FT SELF RETRACTING LIFELINE WITH LOCKING CARABINEER

CFL-5/9FT

BLACK RHINO 9FT SELF RETRACTING LIFELINE WITH REBAR HOOK

PRODUCT #

FALCON Pound for pound the strongest, most durable retractable lifeline available. For tough applications, nearly indestructable.

MP20G/20FT

FALCON 20FT GALVANIZED SELF RETRACTING LIFELINE

MP20SS/20FT

FALCON 20FT STAINLESS STEEL SELF RETRACTING LIFELINE

MP30G/30FT

FALCON 30FT GALVANIZED SELF RETRACTING LIFELINE

MP30SS/30FT

FALCON 30FT STAINLESS STEEL SELF RETRACTING LIFELINE

MP50G/50FT

FALCON 50FT GALVANIZED SELF RETRACTING LIFELINE

MP50SS/50FT

FALCON 50FT STAINLESS STEEL SELF RETRACTING LIFELINE

MP65G/65FT

FALCON 65FT GALVANIZED SELF RETRACTING LIFELINE

MP65SS/65FT

FALCON 65FT STAINLESS STEEL SELF RETRACTING LIFELINE

PRODUCT #

MIGHTYLITE Up to 30% lighter than competitive models in their class. Durable and dependable, ideal for hard-tomount locations.

RL20P/20FT

MIGHTYLITE 20FT WEB STYLE SELF RETRACTING LIFELINE

RL50P/50FT

MIGHTYLITE 50FT WEB STYLE SELF RETRACTING LIFELINE

RL100G/100FT*

MIGHTYLITE 100FT GALVANIZED SELF RETRACTING LIFELINE

RL100SS/100FT

MIGHTYLITE 100FT STAINLESS STEEL SELF RETRACTING LIFELINE

RL130G/130FT*

MIGHTYLITE 130FT GALVANIZED SELF RETRACTING LIFELINE

RL130SS/130FT

MIGHTYLITE 130FT STAINLESS STEEL SELF RETRACTING LIFELINE

PRODUCT #

MIGHTEVAC SELF RETRACTING LIFELINE WITH RETRIEVAL HOIST 20% lighter than competitive models. Combines the superior performance of the best-selling MightyLite Self-Retracting Lifeline Series with a quick-activating retrieval mechanism for emergency evacuation.

MR50G/50FT

MIGHTEVAC 50FT GALVANIZED RETRIEVAL UNIT

MR100G/100FT

MIGHTEVAC 100FT GALVANIZED RETRIEVAL UNIT

MR130G/130FT

MIGHTEVAC 130FT GALVANIZED RETRIEVAL UNIT

MR50SS/50FT

MIGHTEVAC 50FT STAINLESS RETRIEVAL UNIT

MR100SS/100FT

MIGHTEVAC 100FT STAINLESS RETRIEVAL UNIT

MR130SS/130FT

MIGHTEVAC 130FT STAINLESS RETRIEVAL UNIT

PRODUCT #

WINCHES The perfect solution for a range of applications including confined space entry, rescue and personnel/material handling. A secondary fall arrest system is recommended for fall protection.

8442/65FT

MANHANDLER WINCH

8440/60ftbr*

MATERIAL WINCH

Pg. 8

CALL 1-800-477-5732 OR EMAIL SERVICE@FALLCON.CA FOR YOUR FALL ARREST / CONFINED SPACE AND RENTAL REQUIREMENTS

PRODUCT LISTING ANCHORAGES AND CONNECTORS PRODUCT #

SHADOWLITE ADJUSTABLE SLIDING BEAM ANCHOR Shadow beam anchors connect horizontally to a range of I or H beams from 3 to 24 inches and 2 and 1/2 inches thick. Once attached, some units slide along the beam with the worker to provide increased safety, mobility and productivity.The fixed unit is designed to be tightened horizontally or vertically to provide a firm grip on the beam or column to provide a permanent or temporary anchorage attachment.

8816-14/

SHADOWLITE ADJUSTABLE SLIDING BEAM ANCHOR

PRODUCT #

SHADOWLITE FIXED ADJUSTABLE BEAM ANCHOR

8815-12/

SHADOWLITE FIXED ADJUSTABLE BEAM ANCHOR (FITS BEAMS UP TO 12")

8815-24/

SHADOWLITE FIXED ADJUSTABLE BEAM ANCHOR (FITS BEAMS UP TO 24")

PRODUCT #

EXTENSION POLE AND HOOK The 20 ft fiberglass pole and spring loaded hook is ideal for climbing ladders and towers. Installs fall arrest systems up to 20 ft from ground level to angle iron, piping and related structures.

475/

EXTENSION POLE AND HOOK

PRODUCT #

CROSS ARM CHAIN The 6 ft Chain Cross Arm provides a single user with an easy-to-install temporary anchorage connector. It easily installs around I-beams and other structures. It safely wraps around corners and sharp edges and is ideal for use in environments where chemical, heat or weld splatter can occur.

440/6ft

CROSS-ARM CHAIN

PRODUCT #

BEAM CLAMP The Beam Clamp is a steel anchor point that can be attached to I-beams, S-beams and W-beams. It’s swivel attachment ring prevents twisting of the workers attachment device.

455/

BEAM CLAMP

ROOF SYSTEMS, ROPES AND ROPE GRABS PRODUCT #

ROOFSTRIDER MightyLite self-retracting lifeline w/360 degree rotating bracket. Roof mounting assembly w/clamping feet for use on standing seam metal roofs.

SRM50P/50FT

ROOFSTRIDER II WITH MIGHTYLITE 50FT WEB STYLE SRL

SRM50G/50FT

ROOFSTRIDER II WITH MIGHTYLITE 50FT GALVANIZED SRL

PRODUCT #

ROPE GRAB Rope Grab moves easily along vertical lifelines to provide continuous fall protection. Trailing model provide complete hands-free opoeration for increased productivity. They lock quickly in the event of a fall.

8175/C

STAINLESS STEEL TRAILING ROPE GRAB

PRODUCT #

VERTICAL ROPE LIFELINE

300L/25FTBL

25 FT POLYESTER / POLYPROPYLENE ROPE LIFELINE WITH LOCKING SNAP HOOK AND LOOP

300L/50FTBL

50 FT POLYESTER / POLYPROPYLENE ROPE LIFELINE WITH LOCKING SNAP HOOK AND LOOP

300L/75FTBL

75 FT POLYESTER / POLYPROPYLENE ROPE LIFELINE WITH LOCKING SNAP HOOK AND LOOP

300L/100FTBL

100 FT POLYESTER / POLYPROPYLENE ROPE LIFELINE WITH LOCKING SNAP HOOK AND LOOP

Pg. 9

CALL 1-800-477-5732 OR EMAIL SERVICE@FALLCON.CA FOR YOUR FALL ARREST / CONFINED SPACE AND RENTAL REQUIREMENTS

PRODUCT LISTING RESCUE AND DESCENT EQUIPMENT PRODUCT #

UNIVERSAL RESCUE SYSTEM Universal Rescue System is lightweight, compact, versatile access and retrieval rope system. Simple, easy-to-use operation, the rope control handle allows the user to easily ascend and descend the rope control line. Should an emergency rescue situation occur, a top-side worker can easily activate the system to retrieve the user. Ideal for refineries, grain elevators, subways, fire departments, breweries, chair lifts, window washing, confined spaces, shipbuilding, transmission towers, power plants, offshore drilling and bridge inspection.

70-100/100FT**

UNIVERSAL ASCENT DECENT UNIT WITH 25FT WORKING LENGTH

70-200/200FT**

UNIVERSAL ASCENT DECENT UNIT WITH 50FT WORKING LENGTH

70-400/400FT**

UNIVERSAL ASCENT DECENT UNIT WITH 100FT WORKING LENGTH

70-500/500FT**

UNIVERSAL ASCENT DECENT UNIT WITH 125FT WORKING LENGTH

PRODUCT #

SAFESCAPE CONTROLLED DESCENT/SELF-RESCUE SYSTEM SafEscape Controlled Descent/Self-Rescue System offers a safe, timely solution for emergency height rescue. The SafEscape Descender is specially designed for smooth, automatic vertical and angular controlled descent from overhead cranes, towers, aerial lifts, oil derricks, platforms or other elevated work areas.

AG10KT/50FTBL

COMPLETE MILLER SAFESCAPE SELF RESCUE SYSTEM

HARNESSES PRODUCT #

TITAN II Miller Titan II offers enhanced adjustability, improved comfort and increased worksite safety. Easier vertical adjustability that stays in place, More comfortable and better fit with lighter strategically placed padding that provides optimal airflow.

T2000/UAK

TITAN II NON-STRETCH HARNESS WITH BACK D RING

T4000FD/UAK

TITAN II NON-STRETCH HARNESS WITH BACK D RING

T4007FD/UAK

TITAN II NON-STRETCH HARNESS WITH BACK D RING & FRONT D RING

ROOFERS / HORIZONTAL LIFELINES PRODUCT #

TECHLINE KITS Techline Kits contain durable, low-stretch lifline, lifeline adjuster to prevent overtensioning, two heavy-duty cross-arm anchorage straps, shock absorber pack, connecting o-rings and waterproof bucket.

HLLR2/30FT

TECHLINE 30 FT TEMPORARY HORIZONTAL LIFELINE KIT

HLLR2/60FT

TECHLINE 60 FT TEMPORARY HORIZONTAL LIFELINE KIT

TRIPODS PRODUCT #

TRIPOD The Miller Tripod is the anchorage connector for typical confined space and rescue systems. Light weight, high strength aluminum construction.

Used in conjunction with MATERIAL WINCH, MATERIAL WINCH AND 50FT RETRIEVAL UNIT, MAN RATED WINCH, MAN RATED WINCH AND 50 FT RETRIEVAL UNIT, 50FT RETRIEVAL UNIT.

51/7FT

7FT TRIPOD

51X/9FT

9FT TRIPOD

Pg. 10

CALL 1-800-477-5732 OR EMAIL SERVICE@FALLCON.CA FOR YOUR FALL ARREST / CONFINED SPACE AND RENTAL REQUIREMENTS

PRODUCT LISTING DURAHOIST PRODUCT #

FOUR PIECE DURAHOIST SYSTEM / ONE PIECE ADJUSTABLE MAST Complete and economical confined space systems.The four piece Durahoist System is designed for manhole and confined space entry/retrieval applications.The modular design allows for the use of components in various configurations and applications. High strength, light weight aluminum construction, manageable components for easy storage, transport and set-up. Davit pivots for ease of rescue and adjusts for overhead clearance. Base adjusts to fit most standard entries. No tools required for assembly. Demonstrations available.

Used in conjunction with MATERIAL WINCH, MATERIAL WINCH AND 50FT RETRIEVAL UNIT, MAN RATED WINCH, MAN RATED WINCH AND 50 FT RETRIEVAL UNIT, 50FT RETRIEVAL UNIT.

DH-2/

FOUR PIECE MATERIAL HANDLING AND FALL ARREST SYSTEM

DH-3/

ONE PIECE ADJUSTABLE MAST / MOUNTING SLEEVES NOT INCLUDED ON ALL UNITS

PRODUCT #

BARREL MOUNT SLEEVE

DH-5/

BARREL MOUNT SLEEVE WITH 3.5IN OPENING

PRODUCT #

ADJUSTABLE BARREL MOUNT SLEEVE Designed for shoring, wall and parapet applications where frquent set-up over varying wall thicknesses is required. Accomodates wall thicknesses up to 24 inches.

DH-6/

ADJUSTABLE BARREL MOUNT SLEEVE WITH UP TO 24 IN OPENING

PRODUCT #

FLOOR MOUNT SLEEVE Permanently mounts to horizontal steel or concrete structures.

DH-7SS/

FLOOR MOUNT SLEEVE / SALE ONLY

PRODUCT #

WALL MOUNT SLEEVE Permanently mounts to vertical concrete or steel structures.

DH-8SS/

WALL MOUNT SLEEVE / SALE ONLY

PRODUCT #

CORE MOUNT SLEEVE Designed for slip-in installation into 4 inch core hole in concrete or an existing steel structure.

DH-9SS/

CORE MOUNT SLEEVE / SALE ONLY

PRODUCT #

DURAHOIST PORTABLE FALL-ARREST ANCHOR POST, DAVIT ARM AND EXTENSION The suggested applications for this system are electrical transformers, leading edge deck work, confined space and rescue, industrial presses, bridge cranes, large cranes and limited HLL applications. The Anchor Post provides 3 independent swivel tie-off points for fall arrest anchorage, three stage/four position telescoping design and aluminum consturction for easy transportation and setup. The levelling screws allow the system to be plumbed to vertical for proper working stability on inclines up to 15 degrees. Also provides Horizontal Lifeline (HLL) capabilities using the HLL Anchor Ring. The Davit Arm has a quick-attach design and assembles easily to address material handling and rescue needs. The Anchor Post Extension provides the option to tie off one worker at an increased height of 68.5 inches. Demonstrations available.

Used in conjunction with MATERIAL WINCH, MATERIAL WINCH AND 50FT RETRIEVAL UNIT, MAN RATED WINCH, MAN RATED WINCH AND 50 FT RETRIEVAL UNIT, 50FT RETRIEVAL UNIT.

DH-AP-1/

FALL ARREST ANCHOR POST / ANCHOR PLATES NOT INCLUDED ON ALL UNITS

DH-AP-2/

FALL ARREST ANCHOR POST WITH 14IN EXTENSION

DH-AP-3/

FALL ARREST ANCHOR POST WITH RESCUE DAVIT ARM

PRODUCT #

ANCHOR PLATES Durahoist anchor plates are designed to be permanently welded to existing structures in locations of frequent work, or where the use of a portable base is impratical.

DH-AP-5/

STANDARD ANCHOR PLATE / SALE ONLY

DH-AP-7/

ANCHOR PLATE FOR INCLINED SURFACES / SALE ONLY

Pg. 11

CALL 1-800-477-5732 OR EMAIL SERVICE@FALLCON.CA FOR YOUR FALL ARREST / CONFINED SPACE AND RENTAL REQUIREMENTS

PRODUCT LISTING XTIRPA PRODUCT #

XTIRPA Xtirpa is a portable confined space and fall arrest unit with a built-in guard rail. It is designed for manhole and corner confined space entry/retrieval applications. The mast, davit arm and 4 sided barricade are lightweight, reliable and easy to install. This system can be configured for a variety of applications.

Used in conjunction with MATERIAL WINCH, MATERIAL WINCH AND 50FT RETRIEVAL UNIT, MAN RATED WINCH, MAN RATED WINCH AND 50 FT RETRIEVAL UNIT, 50FT RETRIEVAL UNIT.

XTIRRPA

XTIRPA UNIT

BIOSYSTEMS MULTIPRO GAS MONITOR PRODUCT #

BW XT* The Multipro confined space gas detector is compact and rugged with a one-button operation. Real time gas readings with easy to read front mounted backlit display. Exceeds IEC 1000-4-3 for level RFI immunity specifications. Three sensors and up to four channels of direct detection.O2, LEL and a choice of CO, H2S or Duo-Tox two channel CO/H2S sensor. CSA approved.

54-48-314N

COMBUSTIBLES (LEL), OXYGEN (O2), DUO-TOX (CO / H2S), LI-ION BATTERY PACK

54-48-314NC

COMBUSTIBLES (LEL), OXYGEN (O2), DUO-TOX (CO / H2S), LI-ION BATTERY PACK, DATALOGGING

54-48-314A

COMBUSTIBLES (LEL), OXYGEN (O2), DUO-TOX (CO / H2S), ALKALINE BATTERY PACK

54-48-314AC

COMBUSTIBLES (LEL), OXYGEN (O2), DUO-TOX (CO / H2S), ALKALINE BATTERY PACK, DATALOGGING

SURVIVAIR SUPPLIED AIR RESPIRATORS (SAR) PRODUCT #

PRESSURE DEMAND HIP-PAC SAR Survivair Pressure Demand (PD) Supplied Air Respirators and Hip-Pacs provide the highest level of interchangeability, protection, and ease of operation.

HIP-PAC SUPPLIED AIR RESPIRATOR

PRODUCT #

PRESSURE DEMAND AIR CART SAR Used as a primary air source or an emergency air supply, the Survivair Air Cart can contain up to two independently operating 30 minute low pressure (2216 psig) cylinders.

BREATHING AIR CART WITH 25 FT HOSE BREATHING AIR CART WITH 50 FT HOSE BREATHING AIR CART WITH 100 FT HOSE EXTRA 30 MINUTE CYLINDER

Pg. 12

CALL 1-800-477-5732 OR EMAIL SERVICE@FALLCON.CA FOR YOUR FALL ARREST / CONFINED SPACE AND RENTAL REQUIREMENTS

221 HOLIDAY INN DRIVE, CAMBRIDGE ON N3C 3T2 PHONE: 1-800-477-5732 FAX: 1-519-651-1663 EMAIL: SERVICE@FALLCON.CA

RENTAL AGREEMENT Rental/Sales agreement made between Scantech Inspection Services Ltd herinafter called “Lessor” / “Vendor” and the customer named above hereinafter called “Lessee” / “Purchaser” / “Customer”.

I. Master Agreement: The Renter and Dealer acknowledge and agree that the terms and conditions contained in this agreement shall govern the rental of any and all equipment by the Renter from the Dealer, and the term equipment as used herein shall refer to all such equipment. The terms and conditions of this agreement shall govern the rental of all equipment and, except as otherwise expressly agreed by the Dealer and Renter in writing, in the event of a conflict between the terms and conditions contained in this agreement and any terms or conditions set out in any purchase order, acceptance or other document the Renter and Dealer agree that the terms and conditions set out in this agreement shall govern.

II. The Rental Period: The rental period with respect to each piece of equipment shall commence on and include the day of actual delivery of the equipment.

III. Maintenance, Operations and Repairs: The Renter shall not remove, alter, disfigure or cover up any numbering upon the equipment, and shall ensure that no equipment is subjected to careless or needlessly rough usage, and shall at the Renter’s own expense, maintain and ultimately return the equipment together with any tools and accessories in good repair and running order.

IV. Damage to Equipment: The Renter shall indemnify and hold harmless the Dealer against all loss and damage to the equipment during the rental period and the appraisal for any such loss or damage shall be based on the replacement cost of equipment without deduction for depreciation.

V. Liability of Renter: The Renter shall indemnify and hold harmless the Dealer against all loss, expenses penalties, damages, condemnation and legal costs which the Dealer may suffer or many be required or condemned to pay for personal injuries and/or property damage suffered by any person by reason of the equipment or the operations, handling, transportation or use thereof by or while in the hands of the Renter.

VI. Title: Title to the equipment shall at all times be and remain vested in the Dealer and nothing contained in this lease shall be deemed to have the effect or conferring on the Renter any right or title whatsoever.

VII. Subletting: None of the equipment shall be sublet by the Renter, nor shall he assign or transfer any interest in this lease without the previous written consent of the Dealer.

VIII Return: ALL UNITS WILL BE INSPECTED ONCE RETURNED - CHARGES WILL APPLY IF UNIT REQUIRES REPAIRS IX: Freight: Customers are solely responsible for transportation costs to and from our facility.

Pg. 13

CALL 1-800-477-5732 OR EMAIL SERVICE@FALLCON.CA FOR YOUR FALL ARREST / CONFINED SPACE AND RENTAL REQUIREMENTS

221 HOLIDAY INN DRIVE, CAMBRIDGE ON N3C 3T2 PHONE: 1-800-477-5732 FAX: 1-519-651-1663 EMAIL: SERVICE@FALLCON.CA

OUR COMMITMENT Scan-Tech Inspection Services Ltd. works hard to provide you rapid response, technical expertise, best value and quality service and products. Our commitment to “Safety Saves - Safety Pays” is incorporated into the many services Scan-Tech provides, including the inspection of overhead, below the hook, mobile, and stationary material handling equipment.

During your inspection, our certified technicians will perform electrical, mechanical, structural, visual, operational and non-destructive testing as required. Our Inspections comply with all insurance, manufacturer and government requirements, complete with signed documentation as outlined in the Occupational Health and Safety regulations.

NON-DESTRUCTIVE TESTING Our non-destructive testing division can provide high-tech solutions to improve productivity, reduce downtime, while simultaneously maintaining a safer working environment. High-tech solutions require competent personnel and state-of-the-art equipment. ScanTech will provide the best in the industry to ensure your legal and inspection requirements are fulfilled.

INSPECTION SERVICES Safety Inspections of Lifting Devices - Cranes - Hoists - Attachments - Lifting Slings

- Fork Lifts - Stackers - Pallet Trucks

- Man-baskets - Mobile Cranes - Work Platforms - Dock Levelers

REPAIR, SERVICE AND MAINTENANCE TO ALL MAKES OF CRANES - Minor Service

- Major Overhauls - Emergency Repairs

- Personalized PM Programs

INSTALLATION SERVICES - Installation of Overhead Cranes, Jib Cranes, Monorails and Light Rail Systems.

- Installations Horizontal Lifeline Systems from 3M and Honeywell

MATERIAL HANDLING PRODUCTS ®

Pg. 14

CALL 1-800-477-5732 OR EMAIL SERVICE@FALLCON.CA FOR YOUR FALL ARREST / CONFINED SPACE AND RENTAL REQUIREMENTS

1-800-477-5732 SERVICE@FALLCON.CA