Factors to Consider When Resurfacing Asphalt Parking Lots

Even though many people truly value the unique and adaptable look that driveway pavers can help them attain, some individuals are still unaware of the necessity to spend money on sealing them. In Burlington, where paving must be protected from constantly changing weather conditions, driveway sealing may even be more crucial. Brick sealing can make the driveway more practical, lessen the growth of weeds, and shield the pavement from fading and stains.

The contractor will need to remove the existing drive in a thorough tear-out. The next step is to apply a base course of compacted asphalt, then a first layer of compacted gravel. This layer typically has a thickness of two to four inches. The final compacted layer will then be put down.

The surface course of asphalt is laid over the driveway or parking lot's current surface during the resurfacing procedure. Due to their shared construction, the two layers will cling to one another without difficulty. Prior to deciding on this course of action, it is crucial to think about why the driveway is malfunctioning. For instance, adding a new layer will not be the best answer if the issue stems from a weak basis.

A concrete drive can also have asphalt poured on it. In order to prevent the concrete from shifting beneath the new surface, you must take specific steps. This will not happen if the drive is properly prepared, and it will last for many years. You must look at a few different things to determine whether the concrete driveway that is currently there is appropriate. The joints and cracks must be close together, and the blocks should be level.

There are a few things you need to be aware of while installing anything, regardless of the type. Drainage needs to be considered so that rainwater may be transported to the street or a catch basin. Water should not overflow over your neighbor's property or back into your garage. Additionally, the contractor must make sure that the edges are adequately supported.