What are some roofing issues property owners face?
1. Leaks
Aleaky roof is one of the most dreaded events, yet equally common inAustralia as rain can become fierce anytime in the country. Moreover, learning the presence of a leak is not the full redemption, but finding the source is the major challenge.
Just because you spot water falling inside your home does not mean it leaks from that particular point.
So, if you observe a leak in your home, contact roofer Melbourne to find the origin and resolve the issue.
2. Ponding
Ponding generally means the accumulation of water on roof areas Ponding can lead to many problems, for example, sagging because of needless load Also, it can cause mould and attract mosquitoes
The common cause of ponding is inappropriate air conditioning system installation
3. Leaf and moisture build-up
Trees and plants definitely enhance your house's beauty but can also lead to gutter and roofing problems
Fallen leaves will rest on your roof for a long time and sustain moisture, leading to moisture build-up If the moisture issue is not resolved, it will deteriorate roofing materials Also, leaves can accumulate in gutters, giving rise to drainage problems
So, clear out leaves regularly from the roof and install gutter guards for protection
4. Loose tiles
Tiles grouting can become loose and cause them to fall off As a result, rainwater will seep through the roof, damage the attic, and make water puddles in the house
Oozing water will rot wooden beams, leading to mould and mildew development. Additionally, the water can meddle with electrical wiring and lead to power failure Also, falling tiles can damage people below
However, checking yourself can result in more injury, so call a professional
Also Read: Does Your Tile Roof Need Replacement?
5. Damaged flashing
The flashing keeps awkward, open, and protruding areas sealed from water damage. It is inserted around chimneys, venting pipes, heating and cooling systems, and skylights
You will face issues from the beginning if it is not properly attached. If they open up or crack down, you will have to face many troubles So, contact a roofing specialist Melbourne to repair and strengthen the flashing
6. Blockages and downpipes
If rust is building up from pooling water, there are signs of water damage on the ceiling, or water is pouring over gutters, it shows the possibility of blocked gutters or downpipes
Even if the most durable roofs are prone to damage during storms, you have got a blockage if you notice overflow issues during a short downpour. However, bottlenecks can easily be identified and rectified
As preventative measures, you should clean gutters every six months and more often if your area is densely treed Also, you can install a gutter guard and stop debris from entering your gutters
7. Poor installation and workmanship
Roof problems increase with low-quality materials and poor installation, reducing the roof's longevity For example, the roofer had not cleaned, dried, and primed the adhesion area
Even if such issues are not visible, they can cause drastic harm So, call skilled roofers Melbourne for inspection and rectification of problems
8. Granules clogging downspouts
Granules are a critical part of the roof, protecting the home from UV light However, shingles become vulnerable and prone to cracking if granules start to fall off.
New roof installation might spot some granules However, if your roof is not newly installed, granules in your downspout mean shingles have become weak and need replacement
Initial signs of falling granules are choking in gutters If twigs, leaves, and debris are not clogging your gutters, granules likely are
9. Improper roof ventilation
Poor ventilation in the attic can lead to excess heat build-up in the attic Also, it might damage sheathing and damage shingles, resulting in roof failure.
The following things can be the cause of poor ventilation:
● Ridge vent and spray foam insulation
● Ridge vent on a hip and ridge roof instead of an attic fan
● Attic fan and ridge vent
● Too many intake areas
Improper ventilation results in moisture build-up, increased internal house temperature, and cracked or blistered shingles Moreover, in winter, unfitting ventilation can give rise to ice dams, causing structural safety issues
10. Shrinkage
Shrinkage of roof materials occurs because of added pressure from roofing materials' shrinkage and pulling from every direction.
Shrinking roof materials can create loads of other difficulties. For example, cracking, deteriorating, and falling off flashing. Shrinkage especially attacks EPDM-covered roofs.
Its signs include tearing or cracking of shingles or flashing
11. Pests problems
Unwanted bugs are a regular source of vexation for homeowners, and when they damage your roof, they can put you and your home at risk.
Moreover, chimneys become nesting sites for pests The nests then form obstacles that make it difficult for hazardous byproducts to exit your home when it is time to utilize your chimney.
Also, smoke and carbon monoxide will billow within and can be lethal if inhaled in excess