KITCHEN STN

KITCHEN RENOVATION AND ADDITION BY: JENNY BURGER

THREE STORY SINGLE FAMILY RESIDENCE

PRELIMINARIES NOT FOR CONSTRUCTION

LAYOUT PAGE TABLE DESCRIPTION TITLE SHEET EXISTING FLOOR PLAN LOWER BASEMENT LEVEL EXISTING FLOOR PLAN MAIN LEVEL EXISTING FLOOR PLAN MAIN LEVEL EXISTING REAR ELEVATION 1 EXISTING SIDE ELEVATIONS 2 AND 3 EXISTING ROOF PLAN PROPOSED FLOOR PLAN MAIN LEVEL PROPOSED FLOOR PLAN MAIN LEVEL PROPOSED ROOF PLAN & ROOF FRAMING PLAN PROPOSED FLOOR FRAMING PLAN PROPOSED REAR ELEVATION 1 PROPOSED RIGHT AND LEFT SIDE ELEVATION 2 & 3 KITCHEN ELEVATION 4 - CROSS SECTION ELEVATIONS 5 & 6 ELEVATION 7 LIGHTING ELECTRICAL PLAN PERSPECTIVE PERSPECTIVE PERSPECTIVE PERSPECTIVE PERSPECTIVE

KITCHEN RENOVATION AND ADDITION

SHEET # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

COMPUTER DRAWING TECHNICIAN

Effective January 1, 2014 The following will be the State of Georgia's minimum Standard Construction Codes: • International Building Code, 2012 Edition, with Georgia Amendments (2015) • International Residential Code, 2012 Edition, with Georgia Amendments (2015) • International Fire Code, 2012 Edition, with Georgia Amendments (2013) • International Plumbing Code, 2012 Edition, with Georgia Amendments (2015) • International Mechanical Code, 2012 Edition, with Georgia Amendments (2012) • International Fuel Gas Code, 2012 Edition, with Georgia Amendments (2015) • National Electrical Code, 2014 Edition, with no Georgia Amendments • International Energy Conservation Code, 20011 Edition, with Georgia Supplements and Amendments (2011) (2012) • 2012 NFPA 101 – Life Safety Code with state Amendments (2013)

TITLE SHEET SCALE: 1/8" = 1' - 0"

THE HOME OWNER, CONTRACTOR AND/OR BUILDER ARE RESPONSIBLE FOR REVIEWING AND ACCEPTING ALL DRAWINGS BEFORE CONSTRUCTION BEGINS. ALL DRAWINGS INCLUDING STRUCTURAL DRAWINGS MUST BE APPROVED/ STAMPED BY A CERTIFIED/ LICENSED ENGINEER AND/ OR ARCHITECT. SHEET SIZE ANSI B (11" x 17") DATE ISSUED:

1/23/2018

SHEET: 1 OF 22

BY: JENNY BURGER

COMPUTER DRAWING TECHNICIAN

Elevation 1

E1

6x6 Post

6x6 Post

6x6 Post

6x6 Post

6x6 Post

PRELIMINARIES NOT FOR CONSTRUCTION

EXISTING CONCRETE DRIVEWAY

9'

45'-4"

FENCE

5' 4'-8 1/2" 18'-2"

KITCHEN RENOVATION AND ADDITION

BASEMENT 43'-7" X 29'-11" 1271 SQ FT

Elevation 2

31'-5 7/8"

E2

1'-10 5/8"

GARAGE

29'-7 1/4"

E3

31'-5 7/8"

Elevation 3

21'-9 3/8"

GATE

THE HOME OWNER, CONTRACTOR AND/OR BUILDER ARE RESPONSIBLE FOR REVIEWING AND ACCEPTING ALL DRAWINGS BEFORE CONSTRUCTION BEGINS. ALL DRAWINGS INCLUDING STRUCTURAL DRAWINGS MUST BE APPROVED/ STAMPED BY A CERTIFIED/ LICENSED ENGINEER AND/ OR ARCHITECT.

27'-2" 45'-4" LIVING AREA 1353 SQ FT

SHEET SIZE ANSI B (11" x 17") DATE ISSUED:

1/23/2018

EXISTING FLOOR PLAN LOWER BASEMENT LEVEL SCALE: 1/8" = 1' - 0"

SHEET: 2 OF 22

BY: JENNY BURGER

COMPUTER DRAWING TECHNICIAN

67'-10 1/2" Elevation 1

E1 10'-11" 24'-7"

8 1/2"

4'-2 1/2"

3'-1 5/8"

3'-1 3/4"

3'-4 1/2"

5168

1/ -0 4'

8"

2'-2"

5/

4 1/4"

6'-6 1/2"

5'-1 1/2"

13'-6" 2'-10"

5'-6 1/2"

-6

3'-3" 5'-0 3/8"

2'-10"

1'-6 1/2"

3'

2"

18068

12'-9"

4 1/4"

11'-9 1/2"

6'

11'-11 1/2"

2'-6 1/8"

6'-3 3/8"

2832DH

2832DH

2846DH

2846DH

12'-10 1/2"

UNSPECIFIED 1'-2" X 1'-8" 2 SQ FT

GAS RANGE

STAIRS

19'-4 1/2"

2668

FAMILY ROOM

2862DH

ENTRY

12'-3" X 17'-3" 211 SQ FT

5068

11'-7"

STORAGE1'-3 1/2"

10'-10" X 3'-11" 42 SQ FT

12'-9 1/2"

6'-11"

STORAGE 10'-10" X 3'-11" 42 SQ FT

LIVING ROOM

UP 17'-9 1/2"

18'-1 1/2"

17'-10" X 19'-5" 345 SQ FT

3468

10'-9 1/2"

9'

5068

12'-10" X 11'-7" 148 SQ FT

2862DH

13'-2 1/2"

5'-6 1/2"

6'-2" 11'-8 1/2"

6'-3 1/2"

4'-6 1/2" 10'-10"

6'-2 1/4"

2862DH

2862DH

2'-10 3/4" 2'-10 3/4" 18'-2"

1'-10 5/8"

1'-10 7/8"

2862DH

E2

Elevation 2

2068

3'-9"

8'-8" X 3'-10" 33 SQ FT

5'-7 1/2"

10'-10"

1'-4"

2868

3'-11"

2868

13'-4 3/8"

HALL

1'-8"

4'-0 1/2"

FENCE

3'-9" X 9'-4" 35 SQ FT

17'-3"

19'-4 1/2"

6'-11"

1'-8" X 5'-2" 8 SQ FT

3'-6"

6'-11"

DOWN TO BASEMENT

UNSPECIFIED

GATE FENCE

9'-3 5/8"

2'-9 3/8"

8'-8" BATH 8'-8" X 5'-1" 40 SQ FT

3'-9 3/4"

2'-6"

CLOSET 1'-5" X 2'-0" 3 SQ FT

1'-9"

TOP OF MANTEL 60" FIRE BOX OVERALL: 31" W X 42" TALL

12'-3" X 12'-5" 152 SQ FT

1'-4 1/2"

1'-11"

12 ROUGH

DINING ROOM

2468

5'-1 3/8"

6'-11"

1668

2668

1'-6"

23'-10"

GARAGE 22'-0" X 23'-10" 508 SQ FT

OVENS

2'-8 1/2"

25'-0 7/8"

30'-2 5/8"

E3

4'

18'-10 3/8"

WASHER

4068

4'-9 1/2"

Elevation 3

DRYER

30'-034'-0 1/2"1/8"

5'-3" X 8'-5" 44 SQ FT

12'-5"

LAUNDRY

12'-3"

8'

6'-4"

25'-4" KITCHEN 25'-4" X 8'-5" 231 SQ FT

3'-11 7/8" 2668

8'-4 7/8"

1'-7"

10'-11"

5'-3" 22'

8'-4 7/8"

3068

2868

10'-8"

2'-0 7/8"

5'-2 1/2"

KITCHEN RENOVATION AND ADDITION

2'-7 1/2"

4'-11"

2'-2"

23'-9"

14'-7"

EXISTING CONCRETE DRIVEWAY

PRELIMINARIES NOT FOR CONSTRUCTION

EXISTING MAIN LEVEL FLOOR PLAN CEILING HEIGHT: 96" MAIN FLOORING: HARD WOOD KITCHEN & LAUNDRY FLOORING: TILE

DECK 24'-7" X 13'-4" 336 SQ FT

6'-2 1/4"

01068

5'-3"

3068

2'-1" 13'-8"

01068

2'-1"

2862DH

4'-3"

5'-1 1/2"

2862DH

2'-10"

5'-6 1/2"

13'-6"

67'-10 AREA 1/2" LIVING 1369 SQ FT

THE HOME OWNER, CONTRACTOR AND/OR BUILDER ARE RESPONSIBLE FOR REVIEWING AND ACCEPTING ALL DRAWINGS BEFORE CONSTRUCTION BEGINS. ALL DRAWINGS INCLUDING STRUCTURAL DRAWINGS MUST BE APPROVED/ STAMPED BY A CERTIFIED/ LICENSED ENGINEER AND/ OR ARCHITECT. SHEET SIZE ANSI B (11" x 17") DATE ISSUED:

1/23/2018

EXISTING FLOOR PLAN MAIN LEVEL SCALE: 1/8" = 1' - 0"

SHEET: 3 OF 22

BY: JENNY BURGER

COMPUTER DRAWING TECHNICIAN

67'-10 1/2"

E1 10'-11" 24'-7"

DECK EXISTING CONCRETE DRIVEWAY

3'-1 5/8"

6'-6 1/2"

5'-1 1/2"

2'-10"

5'-6 1/2"

1/

8"

4'

5/

-0

-6

2'-2"

2'-10"

13'-6"

3'

3'-3" 5'-0 3/8"

3'-4 1/2"

5168

2"

18068

3'-1 3/4"

1'-6 1/2"

2832DH

2832DH

2846DH

2846DH

12'-10 1/2"

UNSPECIFIED 1'-2" X 1'-8" 2 SQ FT

5'-3" X 8'-5" 44 SQ FT

GAS RANGE

2668

1'-6" 6'-11" 12 ROUGH

1'-11"

1668

GARAGE 22'-0" X 23'-10"

23'-10"

4068

OVENS

2'-8 1/2"

WASHER

5'-1 3/8"

DRYER

4'

18'-10 3/8"

DINING ROOM 12'-3" X 12'-5" 152 SQ FT

1'-4 1/2"

CLOSET 1'-5" X 2'-0" 3 SQ FT

HALL 3'-9" X 9'-4" 35 SQ FT

12'-5"

LAUNDRY

8'

25'-4" X 8'-5" 231 SQ FT

12'-3"

3'-11 7/8" 2668

25'-4" KITCHEN

6'-4"

8'-4 7/8"

1'-7"

10'-11"

2868

22'

8'-4 7/8"

3068

5'-3"

2'-0 7/8"

5'-2 1/2" 10'-8"

THE HOME OWNER, CONTRACTOR AND/OR BUILDER ARE RESPONSIBLE FOR REVIEWING AND ACCEPTING ALL DRAWINGS BEFORE CONSTRUCTION BEGINS. ALL DRAWINGS INCLUDING STRUCTURAL DRAWINGS MUST BE APPROVED/ STAMPED BY A CERTIFIED/ LICENSED ENGINEER AND/ OR ARCHITECT. SHEET SIZE ANSI B (11" x 17") DATE ISSUED:

1/23/2018

EXISTING FLOOR PLAN MAIN LEVEL SCALE: SCALE:1/8" 1/4"==1'1'- -0"0"

SHEET: 4 OF 22

13'-4 3/8"

8 1/2"

4'-2 1/2"

12'-9"

4 1/4"

11'-9 1/2"

6'

11'-11 1/2"

2'-6 1/8"

6'-3 3/8"

KITCHEN RENOVATION AND ADDITION

2'-7 1/2"

4'-11"

2'-2"

23'-9"

14'-7"

24'-7" X 13'-4" 336 SQ FT

EXISTING MAIN LEVEL FLOOR PLAN CEILING HEIGHT: 96" MAIN FLOORING: HARD WOOD KITCHEN & LAUNDRY FLOORING: TILE

PRELIMINARIES NOT FOR CONSTRUCTION

Elevation 1

BY: JENNY BURGER

PRELIMINARIES NOT FOR CONSTRUCTION

COMPUTER DRAWING TECHNICIAN

9 : 12

9 : 12

2830DH 2846DH

2846DH

2832DH

4 : 12

5168

4 : 12

18068

KITCHEN RENOVATION AND ADDITION

2832DH 2846DH

10'-11"

17'-11"

4 : 12

8'-6"

2846DH

7'-11 1/2"

2846DH

16'-10 1/2"

2846DH

THE HOME OWNER, CONTRACTOR AND/OR BUILDER ARE RESPONSIBLE FOR REVIEWING AND ACCEPTING ALL DRAWINGS BEFORE CONSTRUCTION BEGINS. ALL DRAWINGS INCLUDING STRUCTURAL DRAWINGS MUST BE APPROVED/ STAMPED BY A CERTIFIED/ LICENSED ENGINEER AND/ OR ARCHITECT. SHEET SIZE ANSI B (11" x 17") DATE ISSUED:

1/23/2018

EXISTING REAR ELEVATION 1 SCALE: 1/8" = 1' - 0"

SHEET: 5 OF 22

BY: JENNY BURGER

PRELIMINARIES NOT FOR CONSTRUCTION

COMPUTER DRAWING TECHNICIAN

GATE

KITCHEN RENOVATION AND ADDITION

4 : 12

THE HOME OWNER, CONTRACTOR AND/OR BUILDER ARE RESPONSIBLE FOR REVIEWING AND ACCEPTING ALL DRAWINGS BEFORE CONSTRUCTION BEGINS. ALL DRAWINGS INCLUDING STRUCTURAL DRAWINGS MUST BE APPROVED/ STAMPED BY A CERTIFIED/ LICENSED ENGINEER AND/ OR ARCHITECT. SHEET SIZE ANSI B (11" x 17") DATE ISSUED:

1/23/2018

EXISTING SIDE ELEVATIONS 2 AND 3 SCALE: SCALE:1/8" 1/4"==1'1'- -0"0"

SHEET: 6 OF 22

BY: JENNY BURGER

COMPUTER DRAWING TECHNICIAN

2 :1

:1

9 : 12

KITCHEN RENOVATION AND ADDITION

9 : 12

PRELIMINARIES NOT FOR CONSTRUCTION

9 : 12

2

4

4

4 : 12

MAIN LEVEL

9 : 12

UPPER LEVEL

9 : 12

9 : 12

THE HOME OWNER, CONTRACTOR AND/OR BUILDER ARE RESPONSIBLE FOR REVIEWING AND ACCEPTING ALL DRAWINGS BEFORE CONSTRUCTION BEGINS. ALL DRAWINGS INCLUDING STRUCTURAL DRAWINGS MUST BE APPROVED/ STAMPED BY A CERTIFIED/ LICENSED ENGINEER AND/ OR ARCHITECT. SHEET SIZE ANSI B (11" x 17") DATE ISSUED:

1/23/2018

EXISTING ROOF PLAN SCALE: 1/8" = 1' - 0"

SHEET: 7 OF 22

BY: JENNY BURGER

COMPUTER DRAWING TECHNICIAN

Elevation 1

E1 24'-5 1/2" 3'

NEW CONCRETE PAD

6' 3'

STEP MOUNT THESE WINDOWS AT 90" A.F.F.

W1836R

3DB36

3DB36 10'

23'-9 1/2"

E5

18068

E7 9'-6"

INTEGRATED DW PANEL

2046DH

20 WASTE 4'-6"

DW

SB36

3DB16 11'-0 1/2"

REMOVE WALL INSTALL HEADER RECESSED INTO CEILING IF POSSIBLE

1'-3"

B38X18

B38X18

1'-3"

NO CORBELS, USE HIDDEN METAL L BRACKETS

B38X18

1'-2" X 1'-8" 2 SQ FT

13'-2"

TALL LIQUOR DRAWERS

24 WINE

2DB27

12'-7"

SB24

DINING ROOM

U362490

12'-3" X 12'-5" 152 SQ FT

3'-6"

37.25X36 5"

37.25X36

PANTRY

2668 CLOSET 1'-5" X 2'-0" 3 SQ FT

E3 12'-2 1/2"

GATE

GLASS

GLASS

12 ROUGH

22'-0" X 23'-10" 508 SQ FT

FENCE

FENCE

1668

REMOVE WALL INSTALL HEADER INTO CEILING, IF POSSIBLE

2068

3'-9" X 9'-4" 35 SQ FT

5068

E2

DROP MANTEL TO LOWER TV. FIRE BOX OVERALL: 31" W X 42" TALL

Elevation 2

HALL BATH 8'-8" X 5'-1" 40 SQ FT

2468

DOWN TO BASEMENT

STAIRS 8'-8" X 3'-10" 33 SQ FT UNSPECIFIED 1'-8" X 5'-2" 8 SQ FT

2668

3'-6"

6'-11"

FAMILY ROOM 17'-10" X 19'-7" 347 SQ FT PAINT THE WOOD PANELING

LIVING ROOM

STORAGE

STORAGE

ENTRY

10'-10" X 3'-11" 42 SQ FT

10'-10" X 3'-11" 42 SQ FT

12'-10" X 11'-7" 131 SQ FT

2862DH

12'-3" X 17'-3" 211 SQ FT

2862DH

2862DH

2862DH

2862DH

01068

3068

01068

2862DH

2862DH

KITCHEN RENOVATION AND ADDITION

UP

2868

5068

2868

3468

Elevation 3

WASHER

6'-4"

36" BUILT-IN REFRIGERATOR

E6 25'-4"

5'-3" X 8'-5" 44 SQ FT

GARAGE

2846DH

UNSPECIFIED

KITCHEN 23'-10" X 16'-11" 414 SQ FT

LAUNDRY

DRYER

PROPOSED MAIN LEVEL FLOOR PLAN CEILING HEIGHT: 96" MAIN FLOORING: HARD WOOD

2846DH

3 1/2"

2668

2868

3068

SLIDING BARN DOORS

EXISTING DOG DOOR

W36624

3DB18

16'-10 7/8"

3'

3DB14 OTC332490

E4

4'

2668

8'-4"

STEP

1'-10 1/2"

4'-9"

LCW2436R W1536R B30 LCB36R

8'-4"

W1836L

PRELIMINARIES NOT FOR CONSTRUCTION

3"

3"

10'-6 7/8"

B30

8'-6"

4'-6"

5'-6 1/2"

2046DH

6'-10 1/8"

2640DC

INSTALL POT FILLER 3"

3'-6"

1'-3"

NEW CONCRETE PAD

2640DC

W2436

5068

MICRO + OVEN

EXISTING CONCRETE DRIVEWAY

LIVING AREA 1551 SQ FT

THE HOME OWNER, CONTRACTOR AND/OR BUILDER ARE RESPONSIBLE FOR REVIEWING AND ACCEPTING ALL DRAWINGS BEFORE CONSTRUCTION BEGINS. ALL DRAWINGS INCLUDING STRUCTURAL DRAWINGS MUST BE APPROVED/ STAMPED BY A CERTIFIED/ LICENSED ENGINEER AND/ OR ARCHITECT. SHEET SIZE ANSI B (11" x 17") DATE ISSUED:

1/23/2018

PROPOSED FLOOR PLAN MAIN LEVEL SCALE: 1/8" = 1' - 0"

SHEET: 8 OF 22

Elevation 1

BY: JENNY BURGER

E1 24'-5 1/2"

COMPUTER DRAWING TECHNICIAN

3'

NEW CONCRETE PAD

6' 3'

STEP MOUNT THESE WINDOWS AT 90" A.F.F.

E5

E7 9'-6"

INTEGRATED DW PANEL

2046DH

3DB14

20 WASTE 4'-6"

SB36

3DB16 11'-0 1/2"

1'-3"

B38X18

B38X18

1'-3"

NO CORBELS, USE HIDDEN METAL L BRACKETS

B38X18

KITCHEN

UNSPECIFIED 1'-2" X 1'-8" 2 SQ FT

24 WINE

2DB27

12'-7"

SB24

DINING ROOM

U362490 3'-6"

37.25X36 REMOVE WALL INSTALL HEADER INTO CEILING, IF POSSIBLE

5"

37.25X36

PANTRY

GLASS

GLASS

2668 CLOSET 1'-5" X 2'-0" 3 SQ FT

12'-2 1/2"

12'-3" X 12'-5" 152 SQ FT

12 ROUGH

0" X 23'-10" 508 SQ FT

1668

WASHER

KITCHEN RENOVATION AND ADDITION

13'-2"

TALL LIQUOR DRAWERS

6'-4"

E6 25'-4"

5'-3" X 8'-5" 44 SQ FT

GARAGE

2846DH

36" BUILT-IN REFRIGERATOR

23'-10" X 16'-11" 414 SQ FT

LAUNDRY

DRYER

PROPOSED MAIN LEVEL FLOOR PLAN CEILING HEIGHT: 96" MAIN FLOORING: HARD WOOD

2846DH

3 1/2"

2668

SLIDING BARN DOORS

2868

REMOVE WALL INSTALL HEADER RECESSED INTO CEILING IF POSSIBLE

W36624

DW

16'-10 7/8"

3DB18

EXISTING DOG DOOR

3068

OTC332490

E4

4'

2668

8'-4"

10'

23'-9 1/2"

18068 3'

LCW2436R W1536R B30 LCB36R

PRELIMINARIES NOT FOR CONSTRUCTION

3DB36

4'-9"

8'-4"

3DB36

STEP

1'-10 1/2"

3"

3"

W1836R

10'-6 7/8"

B30

8'-6"

4'-6"

W1836L

5'-6 1/2"

2046DH

6'-10 1/8"

2640DC

INSTALL POT FILLER 3"

3'-6"

1'-3"

NEW CONCRETE PAD

2640DC

W2436

5068

MICRO + OVEN

ONCRETE DRIVEWAY

GATE

HALL 8'-8" X 5'-1" 40 SQ FT

2068

BATH

3'-9" X 9'-4" 35 SQ FT

5068

FAMILY ROOM

THE HOME OWNER, CONTRACTOR AND/OR BUILDER ARE RESPONSIBLE FOR REVIEWING AND ACCEPTING ALL DRAWINGS BEFORE CONSTRUCTION BEGINS. ALL DRAWINGS INCLUDING STRUCTURAL DRAWINGS MUST BE APPROVED/ STAMPED BY A CERTIFIED/ LICENSED ENGINEER AND/ OR ARCHITECT.

17'-10" X 19'-7" 347 SQ FT

SHEET SIZE ANSI B (11" x 17")

DROP MANTEL TO LOWER TV. FIRE BOX OVERALL: 31" W X 42" TALL

UNSPECIFIED 1'-8" X 5'-2" 8 SQ FT

3'-6"

6'-11"

8'-8" X 3'-10" 33 SQ FT

2468

DOWN TO BASEMENT

STAIRS

2668

DATE ISSUED:

PAINT THE WOOD PANELING

1/23/2018

2868

UP

LIVING ROOM PROPOSED FLOOR PLAN MAIN LEVEL 12'-3" X 17'-3" SCALE: 1/8" = 1' SCALE: 1/4" = 1' -0"0"

SHEET: 9 OF 22

PROPOSED ROOF PLAN. MATCH EXISTING OVERHANG, GUTTER, DOWNSPOUT, ROOFING SHINGLES, AND FASCIA.

BY: JENNY BURGER

KITCHEN RENOVATION AND ADDITION

9 : 12

PRELIMINARIES NOT FOR CONSTRUCTION

3 : 12

COMPUTER DRAWING TECHNICIAN

ROOF FRAMING PLAN 2X8 RAFTERS (16" O.C.) SCALE: 1/4" = 1' - 0"

THE HOME OWNER, CONTRACTOR AND/OR BUILDER ARE RESPONSIBLE FOR REVIEWING AND ACCEPTING ALL DRAWINGS BEFORE CONSTRUCTION BEGINS. ALL DRAWINGS INCLUDING STRUCTURAL DRAWINGS MUST BE APPROVED/ STAMPED BY A CERTIFIED/ LICENSED ENGINEER AND/ OR ARCHITECT. SHEET SIZE ANSI B (11" x 17") DATE ISSUED:

1/23/2018

PROPOSED ROOF PLAN & ROOF FRAMING PLAN SCALE: 1/8" = 1' - 0"

SHEET: 10 OF 22

BY: JENNY BURGER

COMPUTER DRAWING TECHNICIAN

GALVANIZED SIMPSON 6"X6" STAND-OFF BASE WITH ACQ RATED HANGER NAILS.

6" X 6" PRESSURE TREATED POST. POST HEIGHT TO BE DETERMINED BY GRADE-ARPPOX. 125"

PRELIMINARIES NOT FOR CONSTRUCTION

TWO ROWS OF #4 REBAR

HEIGHT: 1' MINIMUM 2'

FOOTING DETAIL

7'-11 3/4"

FLOOR FRAMING PLAN 2X10 FLOOR JOIST (16" O.C.) DOUBLE RIM JOIST 6X6 PT POST (TYP.) REINFORCED CONCRETE FOOTINGS (TYP.): 24"X24"X12" MINIMUM

KITCHEN RENOVATION AND ADDITION

7'-11 7/8"

8'-1"

7'-11 7/8"

THE HOME OWNER, CONTRACTOR AND/OR BUILDER ARE RESPONSIBLE FOR REVIEWING AND ACCEPTING ALL DRAWINGS BEFORE CONSTRUCTION BEGINS. ALL DRAWINGS INCLUDING STRUCTURAL DRAWINGS MUST BE APPROVED/ STAMPED BY A CERTIFIED/ LICENSED ENGINEER AND/ OR ARCHITECT. SHEET SIZE ANSI B (11" x 17") DATE ISSUED:

1/23/2018

PROPOSED FLOOR FRAMING PLAN SCALE: SCALE:1/8" 1/4"==1'1'- -0"0"

SHEET: 11 OF 22

BY: JENNY BURGER

PRELIMINARIES NOT FOR CONSTRUCTION

COMPUTER DRAWING TECHNICIAN

2830DH 2846DH

2846DH

2846DH

2846DH

FLASHING

17'-11"

3 : 12

2640DC

8'-6"

5068

2X10 FLOOR JOIST (12" O.C.) DOUBLE RIM JOIST 6X6 PT POST (TYP.) 24"X24"X24" REINFORCED CONCRETE FOOTINGS (TYP.

KITCHEN RENOVATION AND ADDITION

7"

2"

18068

9 1/4"

8'

2846DH

INTERIOR CEILING HEIGHT

2846DH

10'-11"

MOUNT THESE WINDOWS AT 90" A.F.F.

2640DC

THE HOME OWNER, CONTRACTOR AND/OR BUILDER ARE RESPONSIBLE FOR REVIEWING AND ACCEPTING ALL DRAWINGS BEFORE CONSTRUCTION BEGINS. ALL DRAWINGS INCLUDING STRUCTURAL DRAWINGS MUST BE APPROVED/ STAMPED BY A CERTIFIED/ LICENSED ENGINEER AND/ OR ARCHITECT. SHEET SIZE ANSI B (11" x 17") DATE ISSUED:

1/23/2018

PROPOSED REAR ELEVATION 1 SCALE: 1/8" = 1' - 0"

SHEET: 12 OF 22

BY: JENNY BURGER

PRELIMINARIES NOT FOR CONSTRUCTION

COMPUTER DRAWING TECHNICIAN

2046DH

KITCHEN RENOVATION AND ADDITION

2668

THE HOME OWNER, CONTRACTOR AND/OR BUILDER ARE RESPONSIBLE FOR REVIEWING AND ACCEPTING ALL DRAWINGS BEFORE CONSTRUCTION BEGINS. ALL DRAWINGS INCLUDING STRUCTURAL DRAWINGS MUST BE APPROVED/ STAMPED BY A CERTIFIED/ LICENSED ENGINEER AND/ OR ARCHITECT. SHEET SIZE ANSI B (11" x 17") DATE ISSUED:

1/23/2018

PROPOSED RIGHT AND LEFT SIDE ELEVATION 2 & 3 SCALE: SCALE:1/8" 1/4"== 1'1'--0" 0"

SHEET: 13 OF 22

BY: JENNY BURGER

KITCHEN RENOVATION AND ADDITION

4'-6"

3'

8'

7'-6"

5068

2640DC

6'

2640DC

PRELIMINARIES NOT FOR CONSTRUCTION

3'

COMPUTER DRAWING TECHNICIAN

THE HOME OWNER, CONTRACTOR AND/OR BUILDER ARE RESPONSIBLE FOR REVIEWING AND ACCEPTING ALL DRAWINGS BEFORE CONSTRUCTION BEGINS. ALL DRAWINGS INCLUDING STRUCTURAL DRAWINGS MUST BE APPROVED/ STAMPED BY A CERTIFIED/ LICENSED ENGINEER AND/ OR ARCHITECT. SHEET SIZE ANSI B (11" x 17") DATE ISSUED:

1/23/2018

KITCHEN ELEVATION 4 - CROSS SECTION SCALE: SCALE:1/8" 1/2"== 1'1'--0" 0"

SHEET: 14 OF 22

BY: JENNY BURGER

8'

COMPUTER DRAWING TECHNICIAN

GLASS

8'

3'

GLASS

KITCHEN RENOVATION AND ADDITION

3'

PRELIMINARIES NOT FOR CONSTRUCTION

2668

THE HOME OWNER, CONTRACTOR AND/OR BUILDER ARE RESPONSIBLE FOR REVIEWING AND ACCEPTING ALL DRAWINGS BEFORE CONSTRUCTION BEGINS. ALL DRAWINGS INCLUDING STRUCTURAL DRAWINGS MUST BE APPROVED/ STAMPED BY A CERTIFIED/ LICENSED ENGINEER AND/ OR ARCHITECT.

4'-6"

3'

2668

SHEET SIZE ANSI B (11" x 17") DATE ISSUED:

1/23/2018

ELEVATIONS 5 & 6 SCALE: SCALE:1/8" 1/2"== 1'1'--0" 0"

SHEET: 15 OF 22

BY: JENNY BURGER

KITCHEN RENOVATION AND ADDITION

1'-6"

2668

3'

8'

3'

PRELIMINARIES NOT FOR CONSTRUCTION

COMPUTER DRAWING TECHNICIAN

THE HOME OWNER, CONTRACTOR AND/OR BUILDER ARE RESPONSIBLE FOR REVIEWING AND ACCEPTING ALL DRAWINGS BEFORE CONSTRUCTION BEGINS. ALL DRAWINGS INCLUDING STRUCTURAL DRAWINGS MUST BE APPROVED/ STAMPED BY A CERTIFIED/ LICENSED ENGINEER AND/ OR ARCHITECT. SHEET SIZE ANSI B (11" x 17") DATE ISSUED:

1/23/2018

ELEVATION 7 SCALE: SCALE:1/8" 1/2"== 1'1'--0" 0"

SHEET: 16 OF 22

BY: JENNY BURGER

WP

GFCI

CT

GFCI

H

NUMBER E01 E02 E03 E04 E05 E06 E07 E08 E09 E10 E11 E12 E13 E14 E15 E16 E17 E18 E19 E20 E21

GFCI

GFCI

R

R

R O M

R

GD

COMPUTER DRAWING TECHNICIAN

COMMENTS

PRELIMINARIES NOT FOR CONSTRUCTION

WP

ELECTRICAL SCHEDULE QTY ATTACHED TO DESCRIPTION 2 PLUG MOLD 7 UNDER CABINET LIGHT 1 CABINET GARBAGE DISPOSAL SWITCH 1 CEILING CO/SMOKE DETECTOR 3 CEILING PENDANT 10 CEILING RECESSED DOWN LIGHT 6 1 FLOOR DISHWASHER 1 FLOOR GARBAGE DISPOSAL 1 WALL CABLE JACK 3 WALL DUPLEX 2 WALL DUPLEX (WEATHERPROOF) 3 WALL EXTERIOR SCONCE 6 WALL GFCI 1 WALL GAS COOKTOP 1 WALL HOOD W/ VENT 1 WALL MICROWAVE 1 WALL OVEN 1 WALL REFRIGERATOR 1 WALL SINGLE POLE 1 WALL SINGLE POLE SLIDING DIMMER 3 WALL THREE WAY SLIDING DIMMER

DW

R

GD

R

R

3DM

R

R

R

CO/SD

R 3DM 3DM GFCI

GFCI

DM

KITCHEN RENOVATION AND ADDITION

5"

THE HOME OWNER, CONTRACTOR AND/OR BUILDER ARE RESPONSIBLE FOR REVIEWING AND ACCEPTING ALL DRAWINGS BEFORE CONSTRUCTION BEGINS. ALL DRAWINGS INCLUDING STRUCTURAL DRAWINGS MUST BE APPROVED/ STAMPED BY A CERTIFIED/ LICENSED ENGINEER AND/ OR ARCHITECT.

C

UP

SHEET SIZE ANSI B (11" x 17") DATE ISSUED:

1/23/2018

LIGHTING ELECTRICAL PLAN SCALE: SCALE:1/8" 1/4"== 1'1'--0" 0"

SHEET: 17 OF 22

BY: JENNY BURGER

KITCHEN RENOVATION AND ADDITION

PRELIMINARIES NOT FOR CONSTRUCTION

COMPUTER DRAWING TECHNICIAN

THE HOME OWNER, CONTRACTOR AND/OR BUILDER ARE RESPONSIBLE FOR REVIEWING AND ACCEPTING ALL DRAWINGS BEFORE CONSTRUCTION BEGINS. ALL DRAWINGS INCLUDING STRUCTURAL DRAWINGS MUST BE APPROVED/ STAMPED BY A CERTIFIED/ LICENSED ENGINEER AND/ OR ARCHITECT. SHEET SIZE ANSI B (11" x 17") DATE ISSUED:

1/23/2018

PERSPECTIVE SCALE: 1/8" = 1' - 0"

SHEET: 18 OF 22

BY: JENNY BURGER

KITCHEN RENOVATION AND ADDITION

PRELIMINARIES NOT FOR CONSTRUCTION

COMPUTER DRAWING TECHNICIAN

THE HOME OWNER, CONTRACTOR AND/OR BUILDER ARE RESPONSIBLE FOR REVIEWING AND ACCEPTING ALL DRAWINGS BEFORE CONSTRUCTION BEGINS. ALL DRAWINGS INCLUDING STRUCTURAL DRAWINGS MUST BE APPROVED/ STAMPED BY A CERTIFIED/ LICENSED ENGINEER AND/ OR ARCHITECT. SHEET SIZE ANSI B (11" x 17") DATE ISSUED:

1/23/2018

PERSPECTIVE SCALE: 1/8" = 1' - 0"

SHEET: 19 OF 22

BY: JENNY BURGER

KITCHEN RENOVATION AND ADDITION

PRELIMINARIES NOT FOR CONSTRUCTION

COMPUTER DRAWING TECHNICIAN

THE HOME OWNER, CONTRACTOR AND/OR BUILDER ARE RESPONSIBLE FOR REVIEWING AND ACCEPTING ALL DRAWINGS BEFORE CONSTRUCTION BEGINS. ALL DRAWINGS INCLUDING STRUCTURAL DRAWINGS MUST BE APPROVED/ STAMPED BY A CERTIFIED/ LICENSED ENGINEER AND/ OR ARCHITECT. SHEET SIZE ANSI B (11" x 17") DATE ISSUED:

1/23/2018

PERSPECTIVE SCALE: 1/8" = 1' - 0"

SHEET: 20 OF 22

BY: JENNY BURGER

KITCHEN RENOVATION AND ADDITION

PRELIMINARIES NOT FOR CONSTRUCTION

COMPUTER DRAWING TECHNICIAN

THE HOME OWNER, CONTRACTOR AND/OR BUILDER ARE RESPONSIBLE FOR REVIEWING AND ACCEPTING ALL DRAWINGS BEFORE CONSTRUCTION BEGINS. ALL DRAWINGS INCLUDING STRUCTURAL DRAWINGS MUST BE APPROVED/ STAMPED BY A CERTIFIED/ LICENSED ENGINEER AND/ OR ARCHITECT. SHEET SIZE ANSI B (11" x 17") DATE ISSUED:

1/23/2018

PERSPECTIVE SCALE: 1/8" = 1' - 0"

SHEET: 21 OF 22

BY: JENNY BURGER

KITCHEN RENOVATION AND ADDITION

PRELIMINARIES NOT FOR CONSTRUCTION

COMPUTER DRAWING TECHNICIAN

THE HOME OWNER, CONTRACTOR AND/OR BUILDER ARE RESPONSIBLE FOR REVIEWING AND ACCEPTING ALL DRAWINGS BEFORE CONSTRUCTION BEGINS. ALL DRAWINGS INCLUDING STRUCTURAL DRAWINGS MUST BE APPROVED/ STAMPED BY A CERTIFIED/ LICENSED ENGINEER AND/ OR ARCHITECT. SHEET SIZE ANSI B (11" x 17") DATE ISSUED:

1/23/2018

PERSPECTIVE SCALE: 1/8" = 1' - 0"

SHEET: 22 OF 22