Kitchen St Simon

RESIDENCE GEORGIA

Jenny Burger CAD Technician

INTERIOR/KITCHEN RENOVATION

KITCHEN RENOVATION

GEORGIA

LAYOUT PAGE TABLE SHEET NUMBER DESCRIPTION 1 COVER SHEET 2 EXISTING KITCHEN FLOOR PLAN 3 PROPOSED KITCHEN FLOOR PLAN 4 ELEVATI0NS 2 5 ELEVATION 4 6 ELEVATION 1 7 ELEVATION 3 8 OVEN CABINET CUT OUTS 9 ELEVATION 5 10 LIGHTING SCHEDULE 11 PERSPECTIVE 12 PERSPECTIVE 13 PERSPECTIVE

THE HOME OWNER, DESIGNER, AND CONTRACTOR ARE RESPONSIBLE FOR REVIEWING AND ACCEPTING ALL DRAWINGS BEFORE CONSTRUCTION BEGINS. ALL STRUCTURAL DRAWINGS MUST BE EITHER DRAWN OR APPROVED/ STAMPED BY A LICENSED ENGINEER.

SHEET SIZE Letter (8½" x 11") DATE ISSUED:

1/29/2015

COVER SHEET

SHEET: 1 OF 13

FLOORING: HARDWOOD 180 1/4"

72" 45 5/8"

17"

49 1/2"

45 5/8"

33"

12 3/4"

2"

12 7/8"

30610 3087 10 3/8"

3387

17" Jenny Burger CAD Technician

38 7/8"

E3

KITCHEN 241 sq ft

88 3/4"

79 3/4"

82"

BREEZE WAY 98 sq ft

E1

GEORGIA

E4

5 5/8"

13 1/2" 42 1/2"

13 1/8"

54 5/8"

3387

39"

30610

36"

3087

E6

20"

203 3/8"

E2

196 3/8"

E5

37610 3787 9"

45 5/8"

50 1/2"

46"

33"

KITCHEN RENOVATION

30610

3087

53"

9 1/4"

THE HOME OWNER, DESIGNER, AND CONTRACTOR ARE RESPONSIBLE FOR REVIEWING AND ACCEPTING ALL DRAWINGS BEFORE CONSTRUCTION BEGINS. ALL STRUCTURAL DRAWINGS MUST BE EITHER DRAWN OR APPROVED/ STAMPED BY A LICENSED ENGINEER.

SHEET SIZE Letter (8½" x 11") DATE ISSUED:

1/29/2015

EXISTING KITCHEN FLOOR PLAN SCALE: 1/4" = 1' - 0"

SHEET: 2 OF 13

PROPOSED GALLOWAY FLOOR PLAN

34 3/4"

18 5/8"

CEILING HEIGHT APPROX: 135" BASE TRIM: 9 7/8" LINTEL: 8 1/2" WINDOW TRIM: 6 1/4" INTERIOR DOOR TRIM: 5 3/4" EXTERIOR DOOR TRIM: 6" DOOR HEIGHT: 82" FLOORING: HARDWOOD 180 1/4"

78"

72"

49 1/2"

45 5/8"

45 5/8"

33"

24 5/8"

6" FULL HEIGHT CABINETS ON RIGHT SIDE INSIDE THE PANTRY FOR SPICES

27"

17"

FURR OUT BRICK WALL WITH 1" AIR SPACE TO ATTACH CABINETRY. 80 3/4" 1 1/2"

TWO TRAY DIVIDERS IN TOP OF CABINET.

3 5/8"

54 5/8"

21"

19 1/2"

30"

U302496

TV 2"

5 5/8"

13 1/8"

238 sq ft 42 1/2"

W1842R 4DB21

3/4"

24"

44"

KITCHEN

37610 3787 7"

13 1/2"

48"

2DB36

15" 24"

3387

39"

30610

36"

3DB24

1DB15 4DB24

E1 WASTE PULL OUT

3087

36"

E4

16"

24"

36"

SB36

30"

79 3/4"

82"

98 sq ft

20"

203 3/8"

BREEZE WAY

ARCH MANTEL WHAM

196 3/8"

15" E5

Jenny Burger CAD Technician

53"

37"

BROOM CLOSET. FULL HEIGHT FILLER.

22"

W1842L

24"

24"

E2

3DB24UF2596

15"

DW

12" 12"

7 1/4"

E3

3/4" 24"

3/4"

15"

1 1/2"

54 3/8"

TWO ROLL OUT TRAYS IN CABINET ABOVE REFRIGERATOR.

KITCHEN RENOVATION

36"

3387

38 7/8"

30610

2"

GEORGIA

6"

REF.

3087

8 3/4"

42"

18"

3 DECORATIVE SIDE PANELS

9 1/4"

W372227

10 3/8"

15"

3"

12 7/8"

30610

24"

THE HOME OWNER, DESIGNER, AND CONTRACTOR ARE RESPONSIBLE FOR REVIEWING AND ACCEPTING ALL DRAWINGS BEFORE CONSTRUCTION BEGINS. ALL STRUCTURAL DRAWINGS MUST BE EITHER DRAWN OR APPROVED/ STAMPED BY A LICENSED ENGINEER.

SHEET SIZE Letter (8½" x 11") DATE ISSUED:

9"

45 5/8"

50 1/2"

46"

1/29/2015

33"

PROPOSED KITCHEN FLOOR PLAN SCALE: 1/4" = 1' - 0"

SHEET: 3 OF 13

96"

GEORGIA

Jenny Burger CAD Technician

ELEVATION 2

34 1/2"

34 1/2"

2"

THE HOME OWNER, DESIGNER, AND CONTRACTOR ARE RESPONSIBLE FOR REVIEWING AND ACCEPTING ALL DRAWINGS BEFORE CONSTRUCTION BEGINS. ALL STRUCTURAL DRAWINGS MUST BE EITHER DRAWN OR APPROVED/ STAMPED BY A LICENSED ENGINEER.

4"

WASTE PULLOUT

KITCHEN RENOVATION

3 CM COUNTER THICKNESS

SHEET SIZE Letter (8½" x 11") DATE ISSUED:

1/29/2015

ELEVATI0NS 2 SCALE: 1/2" = 1' - 0"

SHEET: 4 OF 13

GEORGIA

34 1/2"

KITCHEN RENOVATION

4"

36"

3CM COUNTER THICKNESS

Jenny Burger CAD Technician

ELEVATION 4

THE HOME OWNER, DESIGNER, AND CONTRACTOR ARE RESPONSIBLE FOR REVIEWING AND ACCEPTING ALL DRAWINGS BEFORE CONSTRUCTION BEGINS. ALL STRUCTURAL DRAWINGS MUST BE EITHER DRAWN OR APPROVED/ STAMPED BY A LICENSED ENGINEER.

SHEET SIZE Letter (8½" x 11") DATE ISSUED:

1/29/2015

ELEVATION 4 SCALE: 1/2" = 1' - 0"

SHEET: 5 OF 13

ELEVATION 1

18"

TALL FILLER FOR COUNTER TOP RETURN

BASE FILLER

Jenny Burger CAD Technician

GEORGIA

KITCHEN RENOVATION

48 7/16"

18" 4"

36"

12 1/4" 6"

49"

7 1/16"

72 7/8"

3 CM COUNTER THICKNESS

2.75" SEPARATION

96"

30"

135"

51"

42"

22"

48"

3"

SEE OVEN DETAIL DRAWING FOR CUT OUTS.

THE HOME OWNER, DESIGNER, AND CONTRACTOR ARE RESPONSIBLE FOR REVIEWING AND ACCEPTING ALL DRAWINGS BEFORE CONSTRUCTION BEGINS. ALL STRUCTURAL DRAWINGS MUST BE EITHER DRAWN OR APPROVED/ STAMPED BY A LICENSED ENGINEER.

SHEET SIZE Letter (8½" x 11") DATE ISSUED:

1/29/2015

ELEVATION 1 SCALE: 3/8" = 1' - 0"

SHEET: 6 OF 13

ELEVATION 3

GEORGIA

KITCHEN RENOVATION

74" 34 1/2" 36"

TO TOP OF HINGE.

4"

72 7/8"

96"

18" 96" 110 3/4"

135"

42"

22"

2 ROLL OUT SHELVES

Jenny Burger CAD Technician

6" DEEP SPICE CABINET

THE HOME OWNER, DESIGNER, AND CONTRACTOR ARE RESPONSIBLE FOR REVIEWING AND ACCEPTING ALL DRAWINGS BEFORE CONSTRUCTION BEGINS. ALL STRUCTURAL DRAWINGS MUST BE EITHER DRAWN OR APPROVED/ STAMPED BY A LICENSED ENGINEER.

SHEET SIZE Letter (8½" x 11") DATE ISSUED:

1/29/2015

ELEVATION 3 SCALE: 1/2" = 1' - 0"

SHEET: 7 OF 13

30" OVEN CABINET CUT OUTS OVER ALL HEIGHTS

GEORGIA

Jenny Burger CAD Technician

48 7/16"

7/16"

29 1/16"

THERMADOR 24" CONVECTION MICROWAVE MCES WITH 30" TRIM KIT OVERALL WIDTH: 23 7/8" OVERALL HEIGHT 14 13/16" (A MINIMUM OF 3/4" IS RECOMMENDED BETWEEN MICROWAVE AND LOWER WALL OVEN. CUTOUT WIDTH: 28 7/16" CUTOUT HEIGHT: 19 7/8" TRIM KIT: 29 3/4"W X 20 1/2" TALL

THERMADOR 30-INCH SINGLE OVEN POD301J Min. Cabinet Width 30" Min. Cabinet Depth 24" Cutout Width 28 1/2" Cutout Height 28 1/4" Trim Overlaps (top - bottom - sides) 13/16" – 1/8" – 5/8"

THERMADOR WARMING DRAWER 30-INCH CONVECTION WDC30JP Front Panel Width 29 3/4" Front Panel Height 11 1/4" Front Panel Depth 1 5/8" (includes gasket) Cutout Width 28 1/2" Cutout Height 10"

Cutout Depth 23"

KITCHEN RENOVATION

96"

20 1/2"

TRIM KIT 13/16"

28 1/2"

11 1/4"

28 1/2"

4"

28 1/4" 1" MINIMUM

1 1/2" 10"

45 7/8"

3/4" MINIMUM IF OVEN IS BELOW

28 7/16"

1 1/2"

19 7/8"

29 15/16"

CUT OUT HEIGHTS

THE HOME OWNER, DESIGNER, AND CONTRACTOR ARE RESPONSIBLE FOR REVIEWING AND ACCEPTING ALL DRAWINGS BEFORE CONSTRUCTION BEGINS. ALL STRUCTURAL DRAWINGS MUST BE EITHER DRAWN OR APPROVED/ STAMPED BY A LICENSED ENGINEER.

30"

SHEET SIZE Letter (8½" x 11") DATE ISSUED:

1/29/2015

OVEN CABINET CUT OUTS SCALE: 1/2" = 1' - 0"

SHEET: 8 OF 13

GEORGIA

KITCHEN RENOVATION

4" 3/4" 34 1/2"

96"

Jenny Burger CAD Technician

ELEVATION 5

THE HOME OWNER, DESIGNER, AND CONTRACTOR ARE RESPONSIBLE FOR REVIEWING AND ACCEPTING ALL DRAWINGS BEFORE CONSTRUCTION BEGINS. ALL STRUCTURAL DRAWINGS MUST BE EITHER DRAWN OR APPROVED/ STAMPED BY A LICENSED ENGINEER.

SHEET SIZE Letter (8½" x 11") DATE ISSUED:

1/29/2015

ELEVATION 5 SCALE: 1/2" = 1' - 0"

SHEET: 9 OF 13

CL 2'-6"

CL 4'-2 1/16"

CL 4'-2 1/16"

4'-6"

2'-6"

3DM

R

CL

R

R

R

5'-8 3/16"

GFCI PLUG MOLD

GFCI DW

B CL

CT

R DW DISPOSER

H

5'-8 3/16"

A - NOT TO SCALE GFCI

2'-6"

R

PLUG MOLD

R

A

3DM DM DM

LIGHTING SCHEDULE CODE DESCRIPTION COMMENTS SINGLE POLE (SLIDING DIMMER) THREE WAY (SLIDING DIMMER) RECTANGULAR A 5" RECESSED CANS IC REMODEL HOUSING PLUG MOLD. B HANGING PENDANT GFCI DISHWASHER VENT RECEPTACLE GAS COOKTOP MICROWAVE RECEPTACLE REFRIGERATOR RECEPTACLE OVEN RECEPTACLE DISPOSER

M M O

KITCHEN RENOVATION

R

CL

GFCI

GEORGIA

GFCI

QTY 2 2 3 8 2 21 3 1 1 1 1 1 1 1

Jenny Burger CAD Technician

R

MODEL

EL55RICA

THE HOME OWNER, DESIGNER, AND CONTRACTOR ARE RESPONSIBLE FOR REVIEWING AND ACCEPTING ALL DRAWINGS BEFORE CONSTRUCTION BEGINS. ALL STRUCTURAL DRAWINGS MUST BE EITHER DRAWN OR APPROVED/ STAMPED BY A LICENSED ENGINEER.

SHEET SIZE Letter (8½" x 11") DATE ISSUED:

1/29/2015

LIGHTING SCHEDULE SCALE: 1/4" = 1' - 0"

SHEET: 10 OF 13

Jenny Burger CAD Technician

GEORGIA

KITCHEN RENOVATION THE HOME OWNER, DESIGNER, AND CONTRACTOR ARE RESPONSIBLE FOR REVIEWING AND ACCEPTING ALL DRAWINGS BEFORE CONSTRUCTION BEGINS. ALL STRUCTURAL DRAWINGS MUST BE EITHER DRAWN OR APPROVED/ STAMPED BY A LICENSED ENGINEER.

SHEET SIZE Letter (8½" x 11") DATE ISSUED:

1/29/2015

PERSPECTIVE

SHEET: 11 OF 13

Jenny Burger CAD Technician

GEORGIA

KITCHEN RENOVATION THE HOME OWNER, DESIGNER, AND CONTRACTOR ARE RESPONSIBLE FOR REVIEWING AND ACCEPTING ALL DRAWINGS BEFORE CONSTRUCTION BEGINS. ALL STRUCTURAL DRAWINGS MUST BE EITHER DRAWN OR APPROVED/ STAMPED BY A LICENSED ENGINEER.

SHEET SIZE Letter (8½" x 11") DATE ISSUED:

1/29/2015

PERSPECTIVE

SHEET: 12 OF 13

Jenny Burger CAD Technician

GEORGIA

KITCHEN RENOVATION THE HOME OWNER, DESIGNER, AND CONTRACTOR ARE RESPONSIBLE FOR REVIEWING AND ACCEPTING ALL DRAWINGS BEFORE CONSTRUCTION BEGINS. ALL STRUCTURAL DRAWINGS MUST BE EITHER DRAWN OR APPROVED/ STAMPED BY A LICENSED ENGINEER.

SHEET SIZE Letter (8½" x 11") DATE ISSUED:

1/29/2015

PERSPECTIVE

SHEET: 13 OF 13