INTERIOR RENO BROOK

Jenny Burger CAD Technician

INTERIOR RENOVATION THESE DRAWINGS ARE VISUAL REPRESENTATIONS AND DO NOT REFLECT THE EXACT FIXTURES (PLUMBING & ELECTRICAL), FINISHES, APPLIANCES, AND MILLWORK TO BE USED IN YOUR PROJECT. PLEASE CONFIRM WITH YOUR CONTRACTOR AND/ OR DESIGNER THE EXACT FIXTURES, FINISHES, MATERIALS TO BE SPECIFIED.

THE HOME OWNER AND CONTRACTOR ARE RESPONSIBLE FOR REVIEWING AND ACCEPTING ALL DRAWINGS BEFORE CONSTRUCTION BEGINS. ALL STRUCTURAL DRAWINGS MUST BE EITHER DRAWN OR APPROVED/ STAMPED BY A LICENSED ENGINEER.

SHEET SIZE Tabloid (11" x 17") DATE ISSUED:

1/25/2018

TITLE SHEET SCALE: 1/4 = 1' - 0"

SHEET: 1 OF 22

EXISTING STONE WALL

PROPOSED FLOOR PLAN CEILING HEIGHT: 96"

4'-1" 2068

2068

2068

2068

2068

2068

2068

5068

5826LS

5826LS

WINDOW

24'-6"

3'-9 1/2"

1'-9"

6'

12'-7"

16'-2 1/2" BEDROOM 6068

5726LS

17 SQ FT

E4

KNEE WALL WITH GLASS ABOVE

2'-8" 24'-6" 12'-3"

BLOCKING

3'-6"

3'

3' WIDE

SHOWER

BLOCKING

3'-6 1/2"

5'

TEMPERED FROSTED GLASS DOOR

2668

2468

HALL

16 SQ FT

456 SQ FT

1'-9"

FAMILY ROOM

12'-3"

BLOCKING

E3 5'-1"

CLOSET

WATER CLOSET

BATH 3'-4"

106 SQ FT

BLOCKING

16'-11 1/2"

OPTIONAL LINEN CLOSET

BUILD NEW WALL

173 SQ FT

CLOSET

6068

9'-6"

KITCHEN

9'-6"

BEDROOM

13'-1"

12'-3" FULL MIRROR ON WALL

3'-6"

3'-6"

SLAB DOORS NO PULLS

7'-7"

2'-3" MICROWAVE DRAWER

5' TABLE PROVIDED BY HOME OWNER

36" IS THE MINIMUM REQUIRED FOR A SHOWER.

4" CURB

3'-7"

3'-2 1/2"

2668

15X24 NICHE'

MASTER CLOSET

48 SQ FT

235 SQ FT

7'-6"

BLIND BASE PULL OUT

TRAY DIVIDER

SPICE PULL OUT

9"

SLAB DOORS NO PULLS

23'

36" GAS COOKTOP WITH SEPARATE OVEN BELOW. SEE MANUFACTURER'S CUT OUT SPECIFICATIONS WASTE PULL OUT BEFORE BUILDING CABINETS.

3'-6"

92 SQ FT

REMOVE DOOR AND CLOSE OPENING 2668

18080

6030TC

2868

6068

2868

2668

5826LS

REMOVE DOOR INSTALL WINDOWS

18'-7 1/2"

3'-4"

12'-3" 12'-0 1/2"

2668

MASTER BDRM 197 SQ FT

FILL DOOR

2868

15X24 NICHE'

22 SQ FT

54" TALL KNEE WALL WITH GLASS ABOVE. TOWEL RACK

SHOWER 20 SQ FT

3'-11 7/8"

5'-6"

WATER CLOSET

3'-11 7/8"

FULL MIRROR ON WALL

4'-9 3/4"

5'

BLOCKING

5'-3 1/4"

2468

CURBLESS

FLOATING VANITIES

INSTALL RECEPTACLES IN DRAWERS

INSTALL RECEPTACLES IN DRAWERS

INSTALL RECEPTACLES IN DRAWERS

FULL MIRROR ON WALL

WALL MOUNT OR FLOOR MOUNT FAUCET TO BE DETERMINED.

6'-4"

9'-7 1/2" 16'-4"

7'-10 7/8"

5825RS

TOWEL RACK

7'-10 7/8"

E1

1'-7"

6'

KNEE WALL HEIGHT: 2" ABOVE BACKSPLASH HEIGHT

3'-4"

FLOORING: TILE

12'-3 1/4"

MASTER BATH 152 SQ FT

INTERIOR RENOVATION

11'-10" TEMPERED GLASS DOORCENTER DOOR WITH BATH TUB

1'-9"

37'-9"

5826LS

22'-0 1/2"

8'-10"

12'-3 1/4"

12'

TRIPLE CASEMENT OPENING SAME DIRECTION

4'-10"

19'-1"

6" 3'

INSTALL POT FILLER WALL CABINETS ON THE LEFT AND RIGHT OF THE HOOD SHOULD BE EQUAL IN WIDTHS.

CLOSE KITCHEN DOOR

421 SQ FT

E6

2668

16'-11"

DW

SPICE PULL OUT

GARAGE

43'-2"

5'

4'

CENTER HOOD WITH UPPER RUN OF WALL CABINETS. BOTTOM HOOD HEIGHT 61.5" COUNTERTOP THICKNESS 2.5"

TEMPERED GLASS PANEL - 72" WIDE BARN DOORS CENTER BARN DOORS WITH BACK DOORS.

28'-8 1/2"

E7

RECESS BOTTOM OF CABINETS TO ACCOMMODATE UNDER CABINET LIGHTS. BOTTOM WALL CABINETS ON THIS WALL ARE TO HAVE GLASS DOORS.

2668

CASED OPENING

3'-10"

3'-1"

2'-11"

2468

PHONE CHARGING STATION MAGAZINE RACKS KEY HOOKS

2'-3"

Jenny Burger CAD Technician

E5

9'

3068

11'-3 1/2"

142 SQ FT

CLOSET

17 SQ FT

2'-11"

3068

103 SQ FT

BEDROOM

WINDOW

280 SQ FT

FILL DOOR

ENTRY

1'-9"

DINING

BLOCKING

2868

2468

74 SQ FT

162 SQ FT

CLOSET

11'-3 1/2"

MUD ROOM

126 SQ FT MAKE ROOM LARGER

6068

STORAGE

INSTALL NEW TEMPERED GLASS DOOR

CASED OPENING

4'

8'-3 1/2"

54 SQ FT

11'-5"

9'-3"

2'

10'-2" LAUNDRY

3'

8' 5'-4"

13'-8"

THESE DRAWINGS ARE VISUAL REPRESENTATIONS AND DO NOT REFLECT THE EXACT FIXTURES (PLUMBING & ELECTRICAL), FINISHES, APPLIANCES, AND MILLWORK TO BE USED IN YOUR PROJECT. PLEASE CONFIRM WITH YOUR CONTRACTOR AND/ OR DESIGNER THE EXACT FIXTURES, FINISHES, MATERIALS TO BE SPECIFIED.

THE HOME OWNER AND CONTRACTOR ARE RESPONSIBLE FOR REVIEWING AND ACCEPTING ALL DRAWINGS BEFORE CONSTRUCTION BEGINS. ALL STRUCTURAL DRAWINGS MUST BE EITHER DRAWN OR APPROVED/ STAMPED BY A LICENSED ENGINEER.

SHEET SIZE Tabloid (11" x 17") DATE ISSUED:

1/25/2018

PROPOSED FLOOR PLAN-MAIN LEVEL SCALE: SCALE: 1/4 1/8"==1'1'- -0"0"

SHEET: 2 OF 22

11'-3 1/2"

11'-10"

INSTALL RECEPTACLES IN DRAWERS

INSTALL RECEPTACLES IN DRAWERS

FULL MIRROR ON WALL

INSTALL RECEPTACLES IN DRAWERS

1'-7"

FLOATING VANITIES

2'-11"

5'-1"

E3

12'-3"

Jenny Burger CAD Technician

WATER CLOSET

BATH

9'

2468

106 SQ FT

BLOCKING

3' WIDE

TEMPERED FROSTED GLASS DOOR

WINDOW

SHOWER

3'

1'-9"

3'-6"

BLOCKING

BLOCKING

5'

HALL 2468

7'-10 7/8"

5825RS

TOWEL RACK

3'-6 1/2"

36" IS THE MINIMUM REQUIRED FOR A SHOWER.

7'-10 7/8"

E1

15X24 NICHE'

BLOCKING

3'-4"

6'

KNEE WALL HEIGHT: 2" ABOVE BACKSPLASH HEIGHT

2668

4" CURB

2468

CURBLESS

12'-3"

3'-4"

20 SQ FT

MASTER BATH

FLOORING: TILE

OPTIONAL LINEN CLOSET

12'-3" FULL MIRROR ON WALL

BUILD NEW WALL

WALL MOUNT OR FLOOR MOUNT FAUCET TO BE DETERMINED.

6'-4"

9'-7 1/2" INTERIOR RENOVATION

4'-10"

SHOWER

12'-3 1/4"

12'-3 1/4"

5826LS

54" TALL KNEE WALL WITH GLASS ABOVE. TOWEL RACK

152 SQ FT

KNEE WALL WITH GLASS ABOVE

1'-9"

22 SQ FT

3'-11 7/8"

5'-6"

WATER CLOSET

5'

4'-9 3/4"

3'-11 7/8"

5'-3 1/4"

FULL MIRROR ON WALL

1'-9"

15X24 NICHE'

BLOCKING

2468

FILL DOOR

2868

BLOCKING

TEMPERED GLASS DOORCENTER DOOR WITH BATH TUB

16'-4"

THESE DRAWINGS ARE VISUAL REPRESENTATIONS AND DO NOT REFLECT THE EXACT FIXTURES (PLUMBING & ELECTRICAL), FINISHES, APPLIANCES, AND MILLWORK TO BE USED IN YOUR PROJECT. PLEASE CONFIRM WITH YOUR CONTRACTOR AND/ OR DESIGNER THE EXACT FIXTURES, FINISHES, MATERIALS TO BE SPECIFIED.

THE HOME OWNER AND CONTRACTOR ARE RESPONSIBLE FOR REVIEWING AND ACCEPTING ALL DRAWINGS BEFORE CONSTRUCTION BEGINS. ALL STRUCTURAL DRAWINGS MUST BE EITHER DRAWN OR APPROVED/ STAMPED BY A LICENSED ENGINEER.

SHEET SIZE Tabloid (11" x 17") DATE ISSUED:

1/25/2018

PROPOSED BATH ROOM FLOOR PLANS SCALE: 1/4 = 1' - 0"

SHEET: 3 OF 22

6"

INTERIOR RENOVATION

3'

4'

8'

Jenny Burger CAD Technician

OPTIONAL FULL TILE WALL.

THESE DRAWINGS ARE VISUAL REPRESENTATIONS AND DO NOT REFLECT THE EXACT FIXTURES (PLUMBING & ELECTRICAL), FINISHES, APPLIANCES, AND MILLWORK TO BE USED IN YOUR PROJECT. PLEASE CONFIRM WITH YOUR CONTRACTOR AND/ OR DESIGNER THE EXACT FIXTURES, FINISHES, MATERIALS TO BE SPECIFIED.

THE HOME OWNER AND CONTRACTOR ARE RESPONSIBLE FOR REVIEWING AND ACCEPTING ALL DRAWINGS BEFORE CONSTRUCTION BEGINS. ALL STRUCTURAL DRAWINGS MUST BE EITHER DRAWN OR APPROVED/ STAMPED BY A LICENSED ENGINEER.

SHEET SIZE Tabloid (11" x 17") DATE ISSUED:

1/25/2018

MASTER BATH ROOM ELEVATION SCALE: SCALE: 1/4 1/2"==1'1'- -0"0"

SHEET: 4 OF 22

Jenny Burger CAD Technician

8'

INTERIOR RENOVATION

3'

CONFIRM CHILDREN'S VANITY HEIGHT WITH HOLLY. INSTALL RECEPTACLES IN DRAWERS.

CONFIRM CHILDREN'S TOWEL BAR HEIGHT WITH HOLLY

THESE DRAWINGS ARE VISUAL REPRESENTATIONS AND DO NOT REFLECT THE EXACT FIXTURES (PLUMBING & ELECTRICAL), FINISHES, APPLIANCES, AND MILLWORK TO BE USED IN YOUR PROJECT. PLEASE CONFIRM WITH YOUR CONTRACTOR AND/ OR DESIGNER THE EXACT FIXTURES, FINISHES, MATERIALS TO BE SPECIFIED.

THE HOME OWNER AND CONTRACTOR ARE RESPONSIBLE FOR REVIEWING AND ACCEPTING ALL DRAWINGS BEFORE CONSTRUCTION BEGINS. ALL STRUCTURAL DRAWINGS MUST BE EITHER DRAWN OR APPROVED/ STAMPED BY A LICENSED ENGINEER.

SHEET SIZE Tabloid (11" x 17") DATE ISSUED:

1/25/2018

ELEVATION BATH ROOM SCALE: SCALE: 1/4 1/2"==1'1'- -0"0"

SHEET: 5 OF 22

Jenny Burger CAD Technician

INTERIOR RENOVATION THESE DRAWINGS ARE VISUAL REPRESENTATIONS AND DO NOT REFLECT THE EXACT FIXTURES (PLUMBING & ELECTRICAL), FINISHES, APPLIANCES, AND MILLWORK TO BE USED IN YOUR PROJECT. PLEASE CONFIRM WITH YOUR CONTRACTOR AND/ OR DESIGNER THE EXACT FIXTURES, FINISHES, MATERIALS TO BE SPECIFIED.

THE HOME OWNER AND CONTRACTOR ARE RESPONSIBLE FOR REVIEWING AND ACCEPTING ALL DRAWINGS BEFORE CONSTRUCTION BEGINS. ALL STRUCTURAL DRAWINGS MUST BE EITHER DRAWN OR APPROVED/ STAMPED BY A LICENSED ENGINEER.

SHEET SIZE Tabloid (11" x 17") DATE ISSUED:

1/25/2018

MASTER BATH PERSPECTIVE SCALE: 1/4 = 1' - 0"

SHEET: 6 OF 22

Jenny Burger CAD Technician

INTERIOR RENOVATION THESE DRAWINGS ARE VISUAL REPRESENTATIONS AND DO NOT REFLECT THE EXACT FIXTURES (PLUMBING & ELECTRICAL), FINISHES, APPLIANCES, AND MILLWORK TO BE USED IN YOUR PROJECT. PLEASE CONFIRM WITH YOUR CONTRACTOR AND/ OR DESIGNER THE EXACT FIXTURES, FINISHES, MATERIALS TO BE SPECIFIED.

THE HOME OWNER AND CONTRACTOR ARE RESPONSIBLE FOR REVIEWING AND ACCEPTING ALL DRAWINGS BEFORE CONSTRUCTION BEGINS. ALL STRUCTURAL DRAWINGS MUST BE EITHER DRAWN OR APPROVED/ STAMPED BY A LICENSED ENGINEER.

SHEET SIZE Tabloid (11" x 17") DATE ISSUED:

1/25/2018

MASTER BATH PERSPECTIVE SCALE: 1/4 = 1' - 0"

SHEET: 7 OF 22

Jenny Burger CAD Technician

INTERIOR RENOVATION THESE DRAWINGS ARE VISUAL REPRESENTATIONS AND DO NOT REFLECT THE EXACT FIXTURES (PLUMBING & ELECTRICAL), FINISHES, APPLIANCES, AND MILLWORK TO BE USED IN YOUR PROJECT. PLEASE CONFIRM WITH YOUR CONTRACTOR AND/ OR DESIGNER THE EXACT FIXTURES, FINISHES, MATERIALS TO BE SPECIFIED.

THE HOME OWNER AND CONTRACTOR ARE RESPONSIBLE FOR REVIEWING AND ACCEPTING ALL DRAWINGS BEFORE CONSTRUCTION BEGINS. ALL STRUCTURAL DRAWINGS MUST BE EITHER DRAWN OR APPROVED/ STAMPED BY A LICENSED ENGINEER.

SHEET SIZE Tabloid (11" x 17") DATE ISSUED:

1/25/2018

MASTER BATH PERSPECTIVE SCALE: 1/4 = 1' - 0"

SHEET: 8 OF 22

Jenny Burger CAD Technician

INTERIOR RENOVATION THESE DRAWINGS ARE VISUAL REPRESENTATIONS AND DO NOT REFLECT THE EXACT FIXTURES (PLUMBING & ELECTRICAL), FINISHES, APPLIANCES, AND MILLWORK TO BE USED IN YOUR PROJECT. PLEASE CONFIRM WITH YOUR CONTRACTOR AND/ OR DESIGNER THE EXACT FIXTURES, FINISHES, MATERIALS TO BE SPECIFIED.

THE HOME OWNER AND CONTRACTOR ARE RESPONSIBLE FOR REVIEWING AND ACCEPTING ALL DRAWINGS BEFORE CONSTRUCTION BEGINS. ALL STRUCTURAL DRAWINGS MUST BE EITHER DRAWN OR APPROVED/ STAMPED BY A LICENSED ENGINEER.

SHEET SIZE Tabloid (11" x 17") DATE ISSUED:

1/25/2018

MASTER BATH PERSPECTIVE SCALE: 1/4 = 1' - 0"

SHEET: 9 OF 22

Jenny Burger CAD Technician

INTERIOR RENOVATION THESE DRAWINGS ARE VISUAL REPRESENTATIONS AND DO NOT REFLECT THE EXACT FIXTURES (PLUMBING & ELECTRICAL), FINISHES, APPLIANCES, AND MILLWORK TO BE USED IN YOUR PROJECT. PLEASE CONFIRM WITH YOUR CONTRACTOR AND/ OR DESIGNER THE EXACT FIXTURES, FINISHES, MATERIALS TO BE SPECIFIED.

THE HOME OWNER AND CONTRACTOR ARE RESPONSIBLE FOR REVIEWING AND ACCEPTING ALL DRAWINGS BEFORE CONSTRUCTION BEGINS. ALL STRUCTURAL DRAWINGS MUST BE EITHER DRAWN OR APPROVED/ STAMPED BY A LICENSED ENGINEER.

SHEET SIZE Tabloid (11" x 17") DATE ISSUED:

1/25/2018

CHILDREN'S BATH ROOM PERPSECTIVE SCALE: 1/4 = 1' - 0"

SHEET: 10 OF 22

Jenny Burger CAD Technician

INTERIOR RENOVATION THESE DRAWINGS ARE VISUAL REPRESENTATIONS AND DO NOT REFLECT THE EXACT FIXTURES (PLUMBING & ELECTRICAL), FINISHES, APPLIANCES, AND MILLWORK TO BE USED IN YOUR PROJECT. PLEASE CONFIRM WITH YOUR CONTRACTOR AND/ OR DESIGNER THE EXACT FIXTURES, FINISHES, MATERIALS TO BE SPECIFIED.

THE HOME OWNER AND CONTRACTOR ARE RESPONSIBLE FOR REVIEWING AND ACCEPTING ALL DRAWINGS BEFORE CONSTRUCTION BEGINS. ALL STRUCTURAL DRAWINGS MUST BE EITHER DRAWN OR APPROVED/ STAMPED BY A LICENSED ENGINEER.

SHEET SIZE Tabloid (11" x 17") DATE ISSUED:

1/25/2018

CHILDREN'S BATH ROOM PERPSECTIVE SCALE: 1/4 = 1' - 0"

SHEET: 11 OF 22

Jenny Burger CAD Technician

INTERIOR RENOVATION THESE DRAWINGS ARE VISUAL REPRESENTATIONS AND DO NOT REFLECT THE EXACT FIXTURES (PLUMBING & ELECTRICAL), FINISHES, APPLIANCES, AND MILLWORK TO BE USED IN YOUR PROJECT. PLEASE CONFIRM WITH YOUR CONTRACTOR AND/ OR DESIGNER THE EXACT FIXTURES, FINISHES, MATERIALS TO BE SPECIFIED.

THE HOME OWNER AND CONTRACTOR ARE RESPONSIBLE FOR REVIEWING AND ACCEPTING ALL DRAWINGS BEFORE CONSTRUCTION BEGINS. ALL STRUCTURAL DRAWINGS MUST BE EITHER DRAWN OR APPROVED/ STAMPED BY A LICENSED ENGINEER.

SHEET SIZE Tabloid (11" x 17") DATE ISSUED:

1/25/2018

CHILDREN'S BATH ROOM PERPSECTIVE SCALE: 1/4 = 1' - 0"

SHEET: 12 OF 22

2068

2068

2068

2068

2068

EXISTING STO

2068

2068

5068

5826LS

WINDOW

2'

24'-6"

3'-9 1/2"

1'-9"

6'

3'

10'-2" LAUNDRY

5'-4"

8'

12'-7"

54 SQ FT

2868

74 SQ FT

DINING 280 SQ FT

3068

FILL DOOR

6068

11'-5"

MUD ROOM

CASED OPENING

4' INSTALL NEW TEMPERED GLASS DOOR

ENTRY 103 SQ FT

BEDROOM 142 SQ FT

CLOSET 17 SQ FT

E4 2'-8" 3068

24'-6"

E5 PHONE CHARGING STATION MAGAZINE RACKS KEY HOOKS

CASED OPENING

18080

BLIND BASE PULL OUT

3'-2 1/2"

Jenny Burger CAD Technician

BEDROOM CLOSET

INTERIOR RENOVATION

173 SQ FT 6068

9'-6"

3'-6"

SLAB DOORS NO PULLS

16 SQ FT

456 SQ FT

KITCHEN

48 SQ FT

235 SQ FT

6030TC

CLOSET

FAMILY ROOM

3'-6"

SPICE PULL OUT

2'-3" MICROWAVE DRAWER

5' TABLE PROVIDED BY HOME OWNER

16'-11 1/2"

9"

SLAB DOORS NO PULLS

36" GAS COOKTOP WITH SEPARATE OVEN BELOW. SEE MANUFACTURER'S CUT OUT SPECIFICATIONS WASTE PULL OUT BEFORE BUILDING CABINETS.

TRAY DIVIDER

3'

E6

3'-6"

CLOSE KITCHEN DOOR

421 SQ FT

6"

SPICE PULL OUT

INSTALL POT FILLER WALL CABINETS ON THE LEFT AND RIGHT OF THE HOOD SHOULD BE EQUAL IN WIDTHS.

2668

DW

23'

CENTER HOOD WITH UPPER RUN OF WALL CABINETS. BOTTOM HOOD HEIGHT 61.5" COUNTERTOP THICKNESS 2.5"

GARAGE

5'

4'

7'-7"

RECESS BOTTOM OF CABINETS TO ACCOMMODATE UNDER CABINET LIGHTS. BOTTOM WALL CABINETS ON THIS WALL ARE TO HAVE GLASS DOORS.

43'-2"

9'-6"

E7

TEMPERED GLASS PANEL - 72" WIDE BARN DOORS CENTER BARN DOORS WITH BACK DOORS.

28'-8 1/2"

3'-1"

2'-11"

3'-10"

2'-3"

2868

6068

THESE DRAWINGS ARE VISUAL REPRESENTATIONS AND DO NOT REFLECT THE EXACT FIXTURES (PLUMBING & ELECTRICAL), FINISHES, APPLIANCES, AND MILLWORK TO BE USED IN YOUR PROJECT. PLEASE CONFIRM WITH YOUR CONTRACTOR AND/ OR DESIGNER THE EXACT FIXTURES, FINISHES, MATERIALS TO BE SPECIFIED.

2868

REMOVE DOOR INSTALL WINDOWS

12'

TRIPLE CASEMENT OPENING SAME DIRECTION

22'-0 1/2"

8'-10"

37'-9"

18'-7 1/2"

THE HOME OWNER AND CONTRACTOR ARE RESPONSIBLE FOR REVIEWING AND ACCEPTING ALL DRAWINGS BEFORE CONSTRUCTION BEGINS. ALL STRUCTURAL DRAWINGS MUST BE EITHER DRAWN OR APPROVED/ STAMPED BY A LICENSED ENGINEER.

SHEET SIZE Tabloid (11" x 17") DATE ISSUED:

1/25/2018

PROPOSED KITCHEN FLOOR PLAN SCALE: 1/4 = 1' - 0"

SHEET: 13 OF 22

INTERIOR RENOVATION

Jenny Burger CAD Technician

3'

4'-6"

8' 3'

1'-6"

8'

GLASS DOORS

GLASS DOORS

MAGNET BOARD

HORIZONTAL FILE DRAWER CABINET

WASTE

THESE DRAWINGS ARE VISUAL REPRESENTATIONS AND DO NOT REFLECT THE EXACT FIXTURES (PLUMBING & ELECTRICAL), FINISHES, APPLIANCES, AND MILLWORK TO BE USED IN YOUR PROJECT. PLEASE CONFIRM WITH YOUR CONTRACTOR AND/ OR DESIGNER THE EXACT FIXTURES, FINISHES, MATERIALS TO BE SPECIFIED.

THE HOME OWNER AND CONTRACTOR ARE RESPONSIBLE FOR REVIEWING AND ACCEPTING ALL DRAWINGS BEFORE CONSTRUCTION BEGINS. ALL STRUCTURAL DRAWINGS MUST BE EITHER DRAWN OR APPROVED/ STAMPED BY A LICENSED ENGINEER.

SHEET SIZE Tabloid (11" x 17") DATE ISSUED:

1/25/2018

KITCHEN ELEVATIONS SCALE: SCALE: 1/4 1/2"==1'1'- -0"0"

SHEET: 14 OF 22

3'-3"

TRAY DIVIDERS

2.5" THICK COUNTER TOP

KITCHEN AID KRMF

INTERIOR RENOVATION

3'

4'-6"

POT FILLER

GLASS DOORS Jenny Burger CAD Technician

GLASS DOORS

5'-1 1/2"

GLASS DOORS

8'

GLASS DOORS

THESE DRAWINGS ARE VISUAL REPRESENTATIONS AND DO NOT REFLECT THE EXACT FIXTURES (PLUMBING & ELECTRICAL), FINISHES, APPLIANCES, AND MILLWORK TO BE USED IN YOUR PROJECT. PLEASE CONFIRM WITH YOUR CONTRACTOR AND/ OR DESIGNER THE EXACT FIXTURES, FINISHES, MATERIALS TO BE SPECIFIED.

THE HOME OWNER AND CONTRACTOR ARE RESPONSIBLE FOR REVIEWING AND ACCEPTING ALL DRAWINGS BEFORE CONSTRUCTION BEGINS. ALL STRUCTURAL DRAWINGS MUST BE EITHER DRAWN OR APPROVED/ STAMPED BY A LICENSED ENGINEER.

SHEET SIZE Tabloid (11" x 17") DATE ISSUED:

1/25/2018

KITCHEN ELEVATION SCALE: SCALE: 1/4 1/2"==1'1'- -0"0"

SHEET: 15 OF 22

Jenny Burger CAD Technician

KEY HOOKS MAGAZINE RACKS

CHARGING STATION

INTERIOR RENOVATION

3'

TEMPERED GLASS

8'

MAGNET BOARD

THESE DRAWINGS ARE VISUAL REPRESENTATIONS AND DO NOT REFLECT THE EXACT FIXTURES (PLUMBING & ELECTRICAL), FINISHES, APPLIANCES, AND MILLWORK TO BE USED IN YOUR PROJECT. PLEASE CONFIRM WITH YOUR CONTRACTOR AND/ OR DESIGNER THE EXACT FIXTURES, FINISHES, MATERIALS TO BE SPECIFIED.

THE HOME OWNER AND CONTRACTOR ARE RESPONSIBLE FOR REVIEWING AND ACCEPTING ALL DRAWINGS BEFORE CONSTRUCTION BEGINS. ALL STRUCTURAL DRAWINGS MUST BE EITHER DRAWN OR APPROVED/ STAMPED BY A LICENSED ENGINEER.

SHEET SIZE Tabloid (11" x 17") DATE ISSUED:

1/25/2018

ELEVATION 7 SCALE: 1/4 = 1' - 0"

SHEET: 16 OF 22

Jenny Burger CAD Technician

INTERIOR RENOVATION THESE DRAWINGS ARE VISUAL REPRESENTATIONS AND DO NOT REFLECT THE EXACT FIXTURES (PLUMBING & ELECTRICAL), FINISHES, APPLIANCES, AND MILLWORK TO BE USED IN YOUR PROJECT. PLEASE CONFIRM WITH YOUR CONTRACTOR AND/ OR DESIGNER THE EXACT FIXTURES, FINISHES, MATERIALS TO BE SPECIFIED.

THE HOME OWNER AND CONTRACTOR ARE RESPONSIBLE FOR REVIEWING AND ACCEPTING ALL DRAWINGS BEFORE CONSTRUCTION BEGINS. ALL STRUCTURAL DRAWINGS MUST BE EITHER DRAWN OR APPROVED/ STAMPED BY A LICENSED ENGINEER.

SHEET SIZE Tabloid (11" x 17") DATE ISSUED:

1/25/2018

PERSPECTIVE SCALE: 1/4 = 1' - 0"

SHEET: 17 OF 22

Jenny Burger CAD Technician

INTERIOR RENOVATION THESE DRAWINGS ARE VISUAL REPRESENTATIONS AND DO NOT REFLECT THE EXACT FIXTURES (PLUMBING & ELECTRICAL), FINISHES, APPLIANCES, AND MILLWORK TO BE USED IN YOUR PROJECT. PLEASE CONFIRM WITH YOUR CONTRACTOR AND/ OR DESIGNER THE EXACT FIXTURES, FINISHES, MATERIALS TO BE SPECIFIED.

THE HOME OWNER AND CONTRACTOR ARE RESPONSIBLE FOR REVIEWING AND ACCEPTING ALL DRAWINGS BEFORE CONSTRUCTION BEGINS. ALL STRUCTURAL DRAWINGS MUST BE EITHER DRAWN OR APPROVED/ STAMPED BY A LICENSED ENGINEER.

SHEET SIZE Tabloid (11" x 17") DATE ISSUED:

1/25/2018

PERSPECTIVE SCALE: 1/4 = 1' - 0"

SHEET: 18 OF 22

Jenny Burger CAD Technician

INTERIOR RENOVATION THESE DRAWINGS ARE VISUAL REPRESENTATIONS AND DO NOT REFLECT THE EXACT FIXTURES (PLUMBING & ELECTRICAL), FINISHES, APPLIANCES, AND MILLWORK TO BE USED IN YOUR PROJECT. PLEASE CONFIRM WITH YOUR CONTRACTOR AND/ OR DESIGNER THE EXACT FIXTURES, FINISHES, MATERIALS TO BE SPECIFIED.

THE HOME OWNER AND CONTRACTOR ARE RESPONSIBLE FOR REVIEWING AND ACCEPTING ALL DRAWINGS BEFORE CONSTRUCTION BEGINS. ALL STRUCTURAL DRAWINGS MUST BE EITHER DRAWN OR APPROVED/ STAMPED BY A LICENSED ENGINEER.

SHEET SIZE Tabloid (11" x 17") DATE ISSUED:

1/25/2018

PERSPECTIVE SCALE: 1/4 = 1' - 0"

SHEET: 19 OF 22

Jenny Burger CAD Technician

INTERIOR RENOVATION THESE DRAWINGS ARE VISUAL REPRESENTATIONS AND DO NOT REFLECT THE EXACT FIXTURES (PLUMBING & ELECTRICAL), FINISHES, APPLIANCES, AND MILLWORK TO BE USED IN YOUR PROJECT. PLEASE CONFIRM WITH YOUR CONTRACTOR AND/ OR DESIGNER THE EXACT FIXTURES, FINISHES, MATERIALS TO BE SPECIFIED.

THE HOME OWNER AND CONTRACTOR ARE RESPONSIBLE FOR REVIEWING AND ACCEPTING ALL DRAWINGS BEFORE CONSTRUCTION BEGINS. ALL STRUCTURAL DRAWINGS MUST BE EITHER DRAWN OR APPROVED/ STAMPED BY A LICENSED ENGINEER.

SHEET SIZE Tabloid (11" x 17") DATE ISSUED:

1/25/2018

PERSPECTIVE SCALE: 1/4 = 1' - 0"

SHEET: 20 OF 22

Jenny Burger CAD Technician

INTERIOR RENOVATION THESE DRAWINGS ARE VISUAL REPRESENTATIONS AND DO NOT REFLECT THE EXACT FIXTURES (PLUMBING & ELECTRICAL), FINISHES, APPLIANCES, AND MILLWORK TO BE USED IN YOUR PROJECT. PLEASE CONFIRM WITH YOUR CONTRACTOR AND/ OR DESIGNER THE EXACT FIXTURES, FINISHES, MATERIALS TO BE SPECIFIED.

THE HOME OWNER AND CONTRACTOR ARE RESPONSIBLE FOR REVIEWING AND ACCEPTING ALL DRAWINGS BEFORE CONSTRUCTION BEGINS. ALL STRUCTURAL DRAWINGS MUST BE EITHER DRAWN OR APPROVED/ STAMPED BY A LICENSED ENGINEER.

SHEET SIZE Tabloid (11" x 17") DATE ISSUED:

1/25/2018

PERSPCECITVE 5' ISLAND SCALE: 1/4 = 1' - 0"

SHEET: 21 OF 22

Jenny Burger CAD Technician

INTERIOR RENOVATION THESE DRAWINGS ARE VISUAL REPRESENTATIONS AND DO NOT REFLECT THE EXACT FIXTURES (PLUMBING & ELECTRICAL), FINISHES, APPLIANCES, AND MILLWORK TO BE USED IN YOUR PROJECT. PLEASE CONFIRM WITH YOUR CONTRACTOR AND/ OR DESIGNER THE EXACT FIXTURES, FINISHES, MATERIALS TO BE SPECIFIED.

THE HOME OWNER AND CONTRACTOR ARE RESPONSIBLE FOR REVIEWING AND ACCEPTING ALL DRAWINGS BEFORE CONSTRUCTION BEGINS. ALL STRUCTURAL DRAWINGS MUST BE EITHER DRAWN OR APPROVED/ STAMPED BY A LICENSED ENGINEER.

SHEET SIZE Tabloid (11" x 17") DATE ISSUED:

1/25/2018

PERSPECTIVE SCALE: 1/4 = 1' - 0"

SHEET: 22 OF 22