Increase Gtade Recovery and Stop Wet Claims

Wagner has the key elements to increase grade recovery. Introducing the new System 750 in two conf igurations to raise your average MC and prevent wet claims

Pre-PIaner

Wagner's new System 750M220 enables you to increase your average MC coming out of the kiln. By measuring every board coming out of the kiln, comparing it to your target average MC and dropping out too-wet boards for re-drying, an investment of a little inconvenience and additional labor returns BIG dollars in higher grade recovery. Info-Pak PlusrM for Windows NTrM tracks the MC of every board back to the exact location, date and time it was dried and provides archiving and reporting. The Solution to raising average MC.

Post-Planer

Wagner's new $ystem 75011146 detects every wet spot exceeding your target average moisture content (MC) and marks it for your QC staff. (Available with Info-Pak PlusrM for Wndows NTIM) The Solution to wet claims.

The Wagner System 750M and 750D, as outlined above, include state-of-the-art hardware and software enabling you to increase the average moisture content of the wood coming out of your kilns and prevent wet claims. Every System 750 sold in the US includes initial onsite start up, calibration and operation ttaining.

Stickered Units

Single Boards

1612 lligital hand meter 50 on board species, downloadable software records 50fi) MC readings in 200 groups for average, min/max, standard deviation calculations.

[712 Stack Plobing Sensor together with the L6l2 this is the most valuable and popular in-kiln "Hot Check" system in the industry.

Start saving money today! Call toll free to speak to an Applications Specialist and learn how to raise your average MC while preventing wet claims.

ou can't control the weather, but you know that primer must be applied promptly while the wood is clean and dry and the temperature is right. That's why we developed PALCO Prime. You'll save time and money when you order our kiln-dried redwood and Douglas fir products with PALCO Prime.

Just as a building needs a solid foundation, painted wood needs a solid prime coat. Lumber needs to be primed on the front, back, ends and edges.

When wood siding, fascia and trim are primed at our mill, they're primed properly for longJasting performance. With less handling you'll have fewer headaches, toeall the way from the mill to the iobsite.

So, don't worry about the weather. Order PALCO lumber with the PALCO Prime factory finish.