1 minute read

LUMtsER DOORS

Next Article
NVBW PR@DUGTS a;nd

NVBW PR@DUGTS a;nd

Constructed of fiberglass-reinforced engineered composite materials. Oakcraft doors are said to have a 25Vo deeper grain pattern than similar doors. The pattern runs vertically on the stiles and horizontallv on the rails.

The core is insulated with polyurethane rigid foam and the wood stiles provide a l-3/4" thermal barrier between the exterior and interior face sheets.

Circle No. 513 on o. 46

Headless Craftsman

The 6" SHPl0 Headless Pinner from Senco Fastening Systems drives 112", 518" and 3/4" pins without marring work surfaces.

Featuring a 200-pin capacity, the tool fastens moulding, trim and window beading, weighs 2.4 lbs. and is easily reloaded at the bottom with a magazine release.

Circle No. 514 on o. 46 lf you enjoy tolking lumber with people who know how il's produced, where il's produced, ond who produces it, coll us. We hove over l5O yeors'experience ot your disposol.

Look Ma, No Vent!

A nearly invisible roof vent is new from Dairyman's Supply Co.

Designed to conform to all shingles and adjust to various roof pitches, the polypropylene

Ever-Flo Vent weighs less than 3.25 lbs. and is 5' long.

Circle No, 515

Restored Ceiling Grids

A magnetic vinyl stripping from Celotex Corp. covers soiled, damaged and discolored ceiling grids.

Designed to fit standard main runners, cross-tees and wall angles, Retrogrid can be used with steelfaced grid and installed whenceiling tiles are in place.

Available in 60' rolls and 12' rolls, it comes in 15116- and7l8"wide strips.

Circle No. 516

Tight Turning Turret Truck

A turret truck from Hyster Co. stores and retrieves up to 3,000 lbs. on both sides of a 64" aisle without having to exit or re-enter the aisle.

Designed with a hydraulic rotary actuator to turn the forks a full 180'. the N30)CVIH turret truck can be configured to service shelf heights over 24', has five-position tilt steering, four-way adjustable seating, a 16 service-code memory and is equipped with remote diagnostic and adj ustment capabilities.

Circle No. 517

Handy Hinge Butt Marker

The Hinge Butt Marker from Swanson Tool Co., Inc. produces an accurate mortise in doors and jambs.

Featuring a chisel guide for depth and size, a butt gauge for proper hinge width and length, and a l"-wide lip to control depth and keep the chisel level, the marker is available in either a 3-l/2" size for inside or a 4" size for outside hinges.

RBDWOOD

John Wilton

Ray Ryan

Sheila Goodrich

This article is from: