Slo ch blue brush length adjustment tool

New Product

2 krat večja moč brušenja od A12 rdeče barve

【BEFORE】

【AFTER】

© 2013 September XEBEC TECHNOLOGY CO., LTD. All rights reserved.

New Product

There are two factors to se initial rotation speed. You have “Min. required rotation speed to flare the brush” q p and “ Additional rotation speed” depending on burr size.

Also, you may want to increase speed as brush length becomes shorter and requires more speed to flare the brush.

・Using 10 to 15 mm from tip is the most realistic as you cannot ・Using 10 to 15 mm from tip is the most realistic as you cannot exceed Max. speed anytime. ・In terms of tool life, please always start from lower rotation speed.

© 2013 September XEBEC TECHNOLOGY CO., LTD. All rights reserved.

New Product Brush Length Adjustment Tool for Cutting Fiber *No need of taking the Cutting Fiber out of machines *No need of measuring brush projection length each time *Speedy Speedy setting is possible setting is possible

XEXP‐EZ‐001

Akcija: 55,‐ EUR Cena je brez DDV

© 2013 September XEBEC TECHNOLOGY CO., LTD. All rights reserved.