SAB vpenjalni trni HSK

Tool holders HSK ISO 12164 (DIN 69893)

© SAB d.o.o.

2021

HSK ISO 12164 (DIN 69893)

D1 H1

F2

L1

F1

H1

L5

Form A Form C

D2

B1

D4

D16 D7

D10

B3

B2

HSK ISO 12164

F3

Cone D1 32

D7 D10 D16 (max) (max) 4.2 26 M10x1

D2

D4

B1

B2

B3

F1

F2

F3

L1

L5

H1

24

17

7.05

7

9

20

35

16

16

8.92

13

40

30

21

5

34

M12x1

8.05

9

11

20

35

16

20

11.42

17

50

38

26

6.8

42

M16x1 10.54

12

14

26

42

18

25

14.13

21

63

48

34

8.4

53

M18x1 12.54

16

18

26

42

18

32

18.13

26.5

80

60

42

10.2

68 M20x1.5 16.04

18

20

26

42

18

40

22.85

34

100

75

53

12

88 M24x1.5 20.02

20

22

29

45

20

50

28.56

44

F2

L1 F1

D1

L5

D2

D4

D7

D16

D10

HSK ISO 12164 Form E F3

Cone D1 32

D10 (max) 26

D16

F1

F2

F3

L1

L5

17

D7 (max) 4.2

M10x1

20

35

16

16

8.92

30

21

5

34

M12x1

20

35

16

20

11.42

50

38

26

6.8

42

M16x1

26

42

18

25

14.13

63

48

34

8.4

53

M18x1

26

42

18

32

18.13

D2

D4

24

40

Material: Case hardened steel with min. 900 N/mm² of tensile strength in core.

Execution: Case hardened 58±2 Hrc. Depth of case 0.6 - 0.8 mm. Black oxidised.

Accuracy: Taper angle AT3 quality class. Roughness Ra < 0.2

3

HSK ISO 12164 (DIN 69893)

Key benefits of THERMO Shrink-fit: Unlike more traditional tool clamping systems, Shrink-fit toolholding employs heating and cooling properties of steel in order to achieve superior clamping force.

Inside diameter of the toolholder is precisely manufactured to be slightly smaller than the shank diameter of the cutting tool at the room temperature.

Using shrink-fit machine, heat is applied to the toolholder allowing it to expand so that the cutting tool can fit in. Upon cooling down, toolholder contracts to its original dimension the cutting tool.

This clamping system allows for certain benefits not found in more traditional clamping:

•

Superior tool runout - monobloc toolholder, without clamping elements (bolts, nuts, etc.)

•

Higher rigidity - tool shank is gripped 360 deg., through the whole bore length

•

Straightforward operation - fast tool change, less accessories required

•

Increased tool life - better chip load distribution along the cutting edge

•

Easier workpiece approach - thinner profile, reduced nose diameter, various toolholder lengths

•

Enhanced reach - with use of cylindrical shrink fit extensions

•

Internal coolant supply - delivering coolant through the toolholder to the tool edge for better chip removal and superior surface finish.

•

Coolant ports sealable using M4 screws.

•

High pressure nozzles for better coolant direction at higher rpm.

•

Extended spindle life - tool holders fine balanced G2.5 at 25 000 rpm or more.

•

Costs saving - higher machine productivity due to stable operation, increased feeds and speeds and cutting depths.

SAB has two decades worth of experience in supplying customers around the world with only top-quality Shrink fit toolholders.

4

HSK ISO 12164 (DIN 69893)

THERMO Shrink-fit chucks x1 x2

d2 d1

d3

4.5°

Radial runout ≤ 0,003 mm G2.5 at 25 000 min-1

d1 3 4 5

d2 9 10 11

d3 17 18 19

x1 70 70 70

x2 -

Code SF03.32A.070 SF04.32A.070 SF05.32A.070

32

Form A+C

“3 in 1” THERMO Shrink-fit chucks

Internal coolant supply

x1 x2

d2 d1

d3

4.5°

Radial runout ≤ 0,003 mm G2.5 at 25 000 min-1

1 - Open

d1 6 8 10

2 - Closed

d2 21 21 27

3 - High speed

d3 27 27 32

x1 70 75 75

x2 36 36 40

Code SF06.32A.070.IK SF08.32A.070.IK SF10.32A.070.IK

32

Form A+C

Including high speed nozzles and sealing plugs

5

HSK ISO 12164 (DIN 69893)

THERMO Shrink-fit chucks x1 x2

d3 d2 d1

4.5°

Radial runout ≤ 0,003 mm G2.5 at 25 000 min-1

32 Form E

d1 3 4 5

d2 9 10 11

d3 17 18 19

x1 70 70 70

x2 -

Code SF03.32E.070 SF04.32E.070 SF05.32E.070

“3 in 1” THERMO Shrink-fit chucks Internal coolant supply

x1 x2

d3 d2 d1

4.5°

Radial runout ≤ 0,003 mm G2.5 at 25 000 min-1

1 - Open

32 Form E

6

d1 6 8 10

d2 21 21 27

d3 27 27 32

x1 70 75 75

x2 36 36 40

2 - Closed

3 - High speed

Code SF06.32E.070.IK SF08.32E.070.IK SF10.32E.070.IK

HSK ISO 12164 (DIN 69893)

THERMO Shrink-fit chucks x1 x2

d2 d1

d3

4.5°

Radial runout ≤ 0,003 mm G2.5 at 25 000 min-1

d1 3 3 4 4 5 5

d2 9 9 10 10 11 11

d3 15 22 16 22 17 22

x1 60 130 60 130 60 130

x2 -

Code SF03.40A.060 SF03.40A.130 SF04.40A.060 SF04.40A.130 SF05.40A.060 SF05.40A.130

40

Form A+C

“3 in 1” THERMO Shrink-fit chucks

Internal coolant supply

x1 x2

d3 d2 d1

4.5°

Radial runout ≤ 0,003 mm G2.5 at 25 000 min-1

1 - Open

d1 6 6 8 8 10 10 12 12 16 16

2 - Closed

d2 20 21 20 21 20 21 20 21 24 24 24 24 27 27

3 - High speed

d3 27 27 27 27 32 32 32 32 34 34

x1 80 130 80 130 80 130 90 130 90 130

x2 36 36 36 36 42 42 47 47 50 50

Code Code SF06.40A.080.IK SF06.40A.130.IK SF08.40A.080.IK SF08.40A.130.IK SF10.40A.080.IK SF10.40A.130.IK SF12.40A.090.IK SF12.40A.130.IK SF16.40A.090.IK SF16.40A.130.IK

40

Form A+C

Including high speed nozzles and sealing plugs

7

HSK ISO 12164 (DIN 69893)

THERMO Shrink-fit chucks x1 x2

d3 d2 d1

4.5°

Radial runout ≤ 0,003 mm G2.5 at 25 000 min-1

40 Form E

d1 3 3 4 4 5 5

d2 9 9 10 10 11 11

d3 15 22 16 22 17 22

x1 60 130 60 130 60 130

x2 -

Code SF03.40E.060 SF03.40E.130 SF04.40E.060 SF04.40E.130 SF05.40E.060 SF05.40E.130

“3 in 1” THERMO Shrink-fit chucks Internal coolant supply

x1 x2

d3 d2 d1

4.5°

Radial runout ≤ 0,003 mm G2.5 at 25 000 min-1

1 - Open

40 Form E

d1 6 6 8 8 10 10 12 12 16 16

d2 21 21 21 21 24 24 24 24 27 27

d3 27 27 27 27 32 32 32 32 34 34

x1 80 130 80 130 80 130 90 130 90 130

x2 36 36 36 36 42 42 47 47 50 50

2 - Closed

3 - High speed

Code SF06.40E.080.IK SF06.40E.130.IK SF08.40E.080.IK SF08.40E.130.IK SF10.40E.080.IK SF10.40E.130.IK SF12.40E.090.IK SF12.40E.130.IK SF16.40E.090.IK SF16.40E.130.IK

Including high speed nozzles and sealing plugs

8

HSK ISO 12164 (DIN 69893)

THERMO Shrink-fit chucks x1 x2

d2 d1

d3

4.5°

Radial runout ≤ 0,003 mm G2.5 at 25 000 min-1

d1 3 3 4 4 5 5

d2 9 9 10 10 11 11

d3 17 22 18 22 19 22

x1 80 120 80 120 80 120

x2 -

Code SF03.50A.080 SF03.50A.120 SF04.50A.080 SF04.50A.120 SF05.50A.080 SF05.50A.120

50

Form A+C

“3 in 1” THERMO Shrink-fit chucks

Internal coolant supply

x1 x2

d3 d2 d1

4.5°

Radial runout ≤ 0,003 mm G2.5 at 25 000 min-1

1 - Open

d1 6 6 8 8 10 10 12 12 16 14 16 14 16 16 18 18 20 20

2 - Closed

d2 20 21 20 21 20 21 20 21 24 24 24 24 27 27 27 27 33 33 33 33

3 - High speed

d3 27 27 27 27 32 32 32 32 34 32 34 32 34 34 42 42 42 42

x1 80 130 120 80 130 120 80 85 130 120 90 130 120 90 130 120 95 120 95 120 100 120

x2 36 36 36 36 42 42 47 47 50 47 50 47 50 50 50 50 52 52

Code SF06.40A.080.IK SF06.50A.080.IK SF06.40A.130.IK SF06.50A.120.IK SF08.40A.080.IK SF08.50A.080.IK SF08.40A.130.IK SF08.50A.120.IK SF10.40A.080.IK SF10.50A.085.IK SF10.40A.130.IK SF10.50A.120.IK SF12.40A.090.IK SF12.50A.090.IK SF12.40A.130.IK SF12.50A.120.IK SF16.40A.090.IK SF14.50A.090.IK SF16.40A.130.IK SF14.50A.120.IK SF16.50A.095.IK SF16.50A.120.IK SF18.50A.095.IK SF18.50A.120.IK SF20.50A.100.IK SF20.50A.120.IK

50

Form A+C

Including high speed nozzles and sealing plugs

9

© SAB d.o.o.

2021

HSK ISO 12164 (DIN 69893)

THERMO Shrink-fit chucks x1 x2

d3

d2 d1

4.5°

Radial runout ≤ 0,003 mm G2.5 at 25 000 min-1

d1 3 3 3 4 4 4 5 5 5 6 6 6 8 8 8 10 10 10 12 12 12 14 14 14 16 16 16 18 18 18 20 20 20 25 25 32 32

d2 9 9 9 10 10 10 11 11 11 21 21 21 21 21 21 24 24 24 24 24 24 27 27 27 27 27 27 33 33 33 33 33 33 44 44 44 44

d3 16 16 22 17 17 22 18 18 22 27 27 27 27 27 27 32 32 32 32 32 32 34 34 34 34 34 34 42 42 42 42 42 42 53 53 53 53

x1 80 120 160 80 120 160 80 120 160 80 120 160 80 120 160 85 120 160 90 120 160 90 120 160 95 120 160 95 120 160 100 120 160 115 160 100 160

x2 36 36 36 36 36 36 42 42 42 47 47 47 47 47 47 50 50 50 50 50 50 52 52 52 58 58 63 63

Code SF03.63A.080 SF03.63A.120 SF03.63A.160 SF04.63A.080 SF04.63A.120 SF04.63A.160 SF05.63A.080 SF05.63A.120 SF05.63A.160 SF06.63A.080 SF06.63A.120 SF06.63A.160 SF08.63A.080 SF08.63A.120 SF08.63A.160 SF10.63A.085 SF10.63A.120 SF10.63A.160 SF12.63A.090 SF12.63A.120 SF12.63A.160 SF14.63A.090 SF14.63A.120 SF14.63A.160 SF16.63A.095 SF16.63A.120 SF16.63A.160 SF18.63A.095 SF18.63A.120 SF18.63A.160 SF20.63A.100 SF20.63A.120 SF20.63A.160 SF25.63A.115 SF25.63A.160 SF32.63A.100 SF32.63A.160

63

Form A+C

11

HSK ISO 12164 (DIN 69893)

“3 in 1” THERMO Shrink-fit chucks Internal coolant supply

x1 x2

d3 d2 d1

4.5°

Radial runout ≤ 0,003 mm G2.5 at 25 000 min-1

1 - Open

63

Form A+C

d1 6 6 8 8 10 10 12 12 14 14 16 16 18 18 20 20 25 32

d2 21 21 21 21 24 24 24 24 27 27 27 27 33 33 33 33 44 44

d3 27 27 27 27 32 32 32 32 34 34 34 34 42 42 42 42 53 53

x1 80 120 80 120 85 120 90 120 90 120 95 120 95 120 100 120 115 120

x2 36 36 36 36 42 42 47 47 47 47 50 50 50 50 52 52 58 63

2 - Closed

3 - High speed

Code SF06.63A.080.IK SF06.63A.120.IK SF08.63A.080.IK SF08.63A.120.IK SF10.63A.085.IK SF10.63A.120.IK SF12.63A.090.IK SF12.63A.120.IK SF14.63A.090.IK SF14.63A.120.IK SF16.63A.095.IK SF16.63A.120.IK SF18.63A.095.IK SF18.63A.120.IK SF20.63A.100.IK SF20.63A.120.IK SF25.63A.115.IK SF32.63A.120.IK

Including high speed nozzles and sealing plugs

12

HSK ISO 12164 (DIN 69893)

Extended “3 in 1” THERMO Shrink-fit chucks

Internal coolant supply

x1

x2 4.5°

2°

d3 d2 d1

Radial runout ≤ 0,003 mm G2.5 at 25 000 min-1

1 - Open

d1 6 6 8 8 10 10 12 12 16 14 16 14 16 16 18 18 20 20 25 32

2 - Closed

3 - High speed

d2 20 21 20 21 20 21 20 21 24 24 24 24 27 27 27 27 33 33 33 33 44 44

d3 33.5 27 27 36 33.5 27 27 36 37.5 32 40.5 32 37.5 32 40.5 32 34 40 34 43 34 40 34 43 42 47 42 50 42 47 42 50 53 53

x1 160 80 130 200 160 80 130 200 160 80 130 200 160 90 130 200 160 90 130 200 160 200 160 200 160 200 160 160

x2 36 36 36 36 42 42 47 47 50 47 50 47 50 50 50 50 52 52 58 63

Code SF06.40A.080.IK SF06.63A.160.IK SF06.40A.130.IK SF06.63A.200.IK SF08.40A.080.IK SF08.63A.160.IK SF08.40A.130.IK SF08.63A.200.IK SF10.40A.080.IK SF10.63A.160.IK SF10.40A.130.IK SF10.63A.200.IK SF12.40A.090.IK SF12.63A.160.IK SF12.40A.130.IK SF12.63A.200.IK SF16.40A.090.IK SF14.63A.160.IK SF16.40A.130.IK SF14.63A.200.IK SF16.63A.160.IK SF16.63A.200.IK SF18.63A.160.IK SF18.63A.200.IK SF20.63A.160.IK SF20.63A.200.IK SF25.63A.160.IK SF32.63A.160.IK

63

Form A+C

Including high speed nozzles and sealing plugs Vibration-dampening tapered profile

13

HSK ISO 12164 (DIN 69893)

THERMO Shrink-fit chucks Compact execution

x1

d2 d1

x2

Radial runout ≤ 0,003 mm G2.5 at 25 000 min-1

63

Form A+C

14

d1 6 8 10 12 14 16 18 20 25 32

d2 21 21 24 27 33 33 44 44 46 47

x1 65 65 65 75 75 75 75 75 85 85

x2 36 36 42 47 47 50 50 50 56 58

Code SF06.63A.065 SF08.63A.065 SF10.63A.065 SF12.63A.075 SF14.63A.075 SF16.63A.075 SF18.63A.075 SF20.63A.075 SF25.63A.085 SF32.63A.085

HSK ISO 12164 (DIN 69893)

x1

3º THERMO Shrink-fit chucks Slim execution

x2

d3 d2 d1

3°

Radial runout ≤ 0,003 mm G2.5 at 25 000 min-1

d1 3 3 3 4 4 4 5 5 5 6 6 6 8 8 8 10 10 10 12 12 12 16 16 16

d2 9 9 9 10 10 10 11 11 11 12 12 12 14 14 14 16 16 16 18 18 18 24 24 24

d3 14 18 22 15 19 23 16 20 24 17 21 25 19 23 27 21 25 29 24 27 31 30 33 37

x1 80 120 160 80 120 160 80 120 160 80 120 160 80 120 160 85 120 160 90 120 160 95 120 160

x2 36 36 36 36 36 36 42 42 42 47 47 47 47 47 47

Code SF03.63A.080.3 SF03.63A.120.3 SF03.63A.160.3 SF04.63A.080.3 SF04.63A.120.3 SF04.63A.160.3 SF05.63A.080.3 SF05.63A.120.3 SF05.63A.160.3 SF06.63A.080.3 SF06.63A.120.3 SF06.63A.160.3 SF08.63A.080.3 SF08.63A.120.3 SF08.63A.160.3 SF10.63A.085.3 SF10.63A.120.3 SF10.63A.160.3 SF12.63A.090.3 SF12.63A.120.3 SF12.63A.160.3 SF16.63A.095.3 SF16.63A.120.3 SF16.63A.160.3

63

Form A+C

15

HSK ISO 12164 (DIN 69893)

End mill holders Slim execution

x1

d3 d2 d1

Radial runout ≤ 0,003 mm G6.3 at 25 000 min-1

63

Form A+C

16

d1 6 6 6 8 8 8 10 10 10 12 12 12 14 14 14 16 16 16 18 18 18 20 20 20 25 25 25 32 32

d2 17 17 17 21 21 21 24 24 24 27 27 27 29 29 29 33 33 33 35 35 35 39 39 39 47 47 47 57 57

d3 23 28 29 27 32 33 30 35 36 33 38 39 35 40 41 39 44 45 41 46 47 45 48 49 47 47 47 57 57

x1 100 130 160 100 130 160 100 130 160 100 130 160 100 130 160 100 130 160 100 130 160 100 130 160 100 130 160 110 160

Code WE06.63A.100F WE06.63A.130F WE06.63A.160F WE08.63A.100F WE08.63A.130F WE08.63A.160F WE10.63A.100F WE10.63A.130F WE10.63A.160F WE12.63A.100F WE12.63A.130F WE12.63A.160F WE14.63A.100F WE14.63A.130F WE14.63A.160F WE16.63A.100F WE16.63A.130F WE16.63A.160F WE18.63A.100F WE18.63A.130F WE18.63A.160F WE20.63A.100F WE20.63A.130F WE20.63A.160F WE25.63A.100F WE25.63A.130F WE25.63A.160F WE32.63A.130F WE32.63A.160F

HSK ISO 12164 (DIN 69893)

End mill holders

Internal coolant supply

x1

d2 d1

Radial runout ≤ 0,003 mm G6.3 at 25 000 min-1

d1 6 6 8 8 10 10 12 12 14 14 16 16 18 18 20 20 25 32 40

d2 25 25 28 28 35 35 42 42 44 44 48 48 50 50 52 52 65 72 90

x1 65 120 65 120 65 120 80 120 80 120 80 120 80 120 80 120 110 110 120

Code WE06.63A.065.IK WE06.63A.120.IK WE08.63A.065.IK WE08.63A.120.IK WE10.63A.065.IK WE10.63A.120.IK WE12.63A.080.IK WE12.63A.120.IK WE14.63A.080.IK WE14.63A.120.IK WE16.63A.080.IK WE16.63A.120.IK WE18.63A.080.IK WE18.63A.120.IK WE20.63A.080.IK WE20.63A.120.IK WE25.63A.110.IK WE32.63A.110.IK WE40.63A.120.IK

40

Form A+C

17

HSK ISO 12164 (DIN 69893)

End mill holders d2

Radial runout ≤ 0,003 mm

d1

x1

G6.3 at 25 000 min-1

63

Form A+C

18

d1 6 6 6 6 6 8 8 8 8 8 10 10 10 10 10 12 12 12 12 12 14 14 14 14 14

d2 25 25 25 25 25 28 28 28 28 28 35 35 35 35 35 42 42 42 42 42 44 44 44 44 44

x1 65 100 120 160 200 65 100 120 160 200 65 100 120 160 200 80 100 120 160 200 80 100 120 160 200

Code WE06.63A.065 WE06.63A.100 WE06.63A.120 WE06.63A.160 WE06.63A.200 WE08.63A.065 WE08.63A.100 WE08.63A.120 WE08.63A.160 WE08.63A.200 WE10.63A.065 WE10.63A.100 WE10.63A.120 WE10.63A.160 WE10.63A.200 WE12.63A.080 WE12.63A.100 WE12.63A.120 WE12.63A.160 WE12.63A.200 WE14.63A.080 WE14.63A.100 WE14.63A.120 WE14.63A.160 WE14.63A.200

HSK ISO 12164 (DIN 69893)

End mill holders Radial runout ≤ 0,003 mm

d1

d2

x1

G6.3 at 25 000 min-1

d1 16 16 16 16 16 18 18 18 18 18 20 20 20 20 20 25 25 25 32 32 32 40

d2 48 48 48 48 48 50 50 50 50 50 52 52 52 52 52 65 65 65 72 72 72 90

x1 80 100 120 160 200 80 100 120 160 200 80 100 120 160 200 110 160 200 110 160 200 120

Code WE16.63A.080 WE16.63A.100 WE16.63A.120 WE16.63A.160 WE16.63A.200 WE18.63A.080 WE18.63A.100 WE18.63A.120 WE18.63A.160 WE18.63A.200 WE20.63A.080 WE20.63A.100 WE20.63A.120 WE20.63A.160 WE20.63A.200 WE25.63A.110 WE25.63A.160 WE25.63A.200 WE32.63A.110 WE32.63A.160 WE32.63A.200 WE40.63A.120

63

Form A+C

19

HSK ISO 12164 (DIN 69893)

ER Collet chucks x1

d1

Radial runout ≤ 0,003 mm G6.3 at 25 000 min-1

63

Form A+C

20

ER 16 16 16 16 20 20 20 20 25 25 25 25 32 32 32 32 40 40 40 40

Range 0.5 - 10 0.5 - 10 0.5 - 10 0.5 - 10 1 - 13 1 - 13 1 - 13 1 - 13 1 - 16 1 - 16 1 - 16 1 - 16 2 - 20 2 - 20 2 - 20 2 - 20 3 - 26 3 - 26 3 - 26 3 - 26

x1 80 100 160 200 80 100 160 200 80 100 160 200 80 100 160 200 90 120 160 200

d1 28 28 28 28 35 35 35 35 42 42 42 42 50 50 50 50 63 63 63 63

Code ER16.63A.080 ER16.63A.100 ER16.63A.160 ER16.63A.200 ER20.63A.080 ER20.63A.100 ER20.63A.160 ER20.63A.200 ER25.63A.080 ER25.63A.100 ER25.63A.160 ER25.63A.200 ER32.63A.080 ER32.63A.100 ER32.63A.160 ER32.63A.200 ER40.63A.090 ER40.63A.120 ER40.63A.160 ER40.63A.200

HSK ISO 12164 (DIN 69893)

ER Collet chucks Mini execution

x1

d1

Radial runout ≤ 0,003 mm G6.3 at 25 000 min-1

ER 11 11 11 16 16 16 20 20 20 25 25 25

Range 0.5 - 7 0.5 - 7 0.5 - 7 0.5 - 10 0.5 - 10 0.5 - 10 1 - 13 1 - 13 1 - 13 1 - 16 1 - 16 1 - 16

x1 80 100 160 80 100 160 80 100 160 80 100 160

d1 16 16 16 22 22 22 28 28 28 35 35 35

Code ER11.63A.080M ER11.63A.100M ER11.63A.160M ER16.63A.080M ER16.63A.100M ER16.63A.160M ER20.63A.080M ER20.63A.100M ER20.63A.160M ER25.63A.080M ER25.63A.100M ER25.63A.160M

63

Form A+C

Collet chucks 1:10 for DIN 6388 collets x1

d1

Radial runout ≤ 0,003 mm G6.3 at 25 000 min-1

Range 1.5 - 16 2 - 25 4 - 32

x1 110 120 130

d1 43 60 72

Code SP16.63A.110 SP25.63A.120 SP32.63A.130

63

Form A+C

21

HSK ISO 12164 (DIN 69893)

Morse taper holders for mills x1

d1

Radial runout ≤ 0,005 mm G6.3 at 25 000 min-1

63

Form A+C

MK 1 2 3 4

x1 100 120 140 165

d1 25 32 40 48

Code MK1A.63A.100 MK2A.63A.120 MK3A.63A.140 MK4A.63A.165

Morse taper holders for drills x1

d1

Radial runout ≤ 0,005 mm G6.3 at 25 000 min-1

63

Form A+C

22

MK 1 2 3 4

x1 100 120 140 165

d1 25 32 40 48

Code MK1B.63A.100 MK2B.63A.120 MK3B.63A.140 MK4B.63A.165

HSK ISO 12164 (DIN 69893)

Threaded shank milling cutter holders x1 A

d3 d2 M

Radial runout ≤ 0,003 mm G2.5 at 25 000 min-1

M M6 M6 M6 M8 M8 M8 M8 M8 M10 M10 M10 M10 M10 M12 M12 M12 M12 M12 M16 M16 M16 M16 M16

A 25 50 75 25 50 75 100 150 25 50 75 100 150 25 50 75 100 150 25 50 75 100 150

x1 51 76 101 51 76 101 126 176 51 76 101 126 176 51 76 101 126 176 51 76 101 126 176

d2 10 10 10 13 13 13 13 13 18 18 18 18 18 21 21 21 21 21 29 29 29 29 29

d3 13 19 19 15 23 25 28 32 20 25 28 32 36 24 24 31 33 36 28.5 34 34 36 41

Code EF06.63A.051 EF06.63A.076 EF06.63A.101 EF08.63A.051 EF08.63A.076 EF08.63A.101 EF08.63A.126 EF08.63A.176 EF10.63A.051 EF10.63A.076 EF10.63A.101 EF10.63A.126 EF10.63A.176 EF12.63A.051 EF12.63A.076 EF12.63A.101 EF12.63A.126 EF12.63A.176 EF16.63A.051 EF16.63A.076 EF16.63A.101 EF16.63A.126 EF16.63A.176

63

Form A+C

23

HSK ISO 12164 (DIN 69893)

Combi shell mill holders for milling cutters d2

Radial runout ≤ 0,005 mm

d1

x1

G6.3 at 25 000 min-1 l1

63

Form A+C

24

d1 16 16 16 22 22 22 27 27 27 32 32 40 40

x1 60 100 160 60 100 160 60 100 160 60 100 70 100

x2 50 90 150 48 88 148 48 88 148 46 86 56 86

d2 32 32 32 40 40 40 48 48 48 58 58 70 70

x2

l2 27 27 27 31 31 31 33 33 33 38 38 41 41

Code KD16.63A.060 KD16.63A.100 KD16.63A.160 KD22.63A.060 KD22.63A.100 KD22.63A.160 KD27.63A.060 KD27.63A.100 KD27.63A.160 KD32.63A.060 KD32.63A.100 KD40.63A.070 KD40.63A.150

HSK ISO 12164 (DIN 69893)

Shell mill holders for cutters with driving slot

Internal coolant supply

x1

Radial runout ≤ 0,005 mm

d2 d1

l1

G6.3 at 25 000 min-1

d1 16 16 16 16 22 22 22 22 27 27 27 27 32 32 40 40

x1 45 100 130 160 50 100 130 160 60 100 130 160 60 100 60 100

l1 17 17 17 17 19 19 19 19 21 21 21 21 24 24 27 27

d2 38 38 38 38 50 50 50 50 60 60 60 60 78 78 89 89

Code AD16.63A.045 AD16.63A.100 AD16.63A.130 AD16.63A.160 AD22.63A.050 AD22.63A.100 AD22.63A.130 AD22.63A.160 AD27.63A.060 AD27.63A.100 AD27.63A.130 AD27.63A.160 AD32.63A.060 AD32.63A.100 AD40.63A.060 AD40.63A.100

63

Form A+C

25

HSK ISO 12164 (DIN 69893)

Holders for indexable inserts drills x1

d2 d1

Radial runout ≤ 0,005 mm G6.3 at 25 000 min-1

63

Form A+C

d1 20 25 32

x1 80 90 90

d2 40 45 52

Code VB20.63A.080 VB25.63A.090 VB32.63A.090

HV drill chucks for RH and LH rotation x1

d1

Radial runout ≤ 0,02 mm G2.5 at 25 000 min-1

63

Form A+C

mm 0.3 - 8 0.5 - 13 1 - 16

x1 95 103 106

d1 36 44 51

Integrated precision drill chuck with Hexagonal key lock.

For drilling, milling, reaming and tapping.

Through coolant.

Drill chuck slipping impossible due to chuck being screwed with the holder body.

Compact design, enhanced reach.

Range up to 8, 13 or 16 mm.

26

Code HV08.63A.095 HV13.63A.103 HV16.63A.106

HSK ISO 12164 (DIN 69893)

Quick-change tapping heads

d1

x1

Tap size M3 - M14 M5 - M22 M14 - M33

Compensation ± 7.5 ± 12.5 ± 20

Insert size 1 2 3

x1 74 110 141

d1 36 53 78

Code GN12.63A.074 GN20.63A.110 GN33.63A.141

63

Form A+C

Length compensation in compression and tension.

Blank bars x1

Cone and flange hardened and finished.

Machineable soft body. d1

Pre-balanced

d1 80 80 80

x1 160 200 250

Code RL80.63A.160 RL80.63A.200 RL80.63A.250

63

Form A+C

Test bars x1

d1

Radial runout ≤ 0,003 mm Precisely ground length and diameter.

Test certificate and protective case supplied.

d1 40

x1 250

Code TB40.63A.250

63

Form A+C

27

28

© SAB d.o.o.

2021

HSK ISO 12164 (DIN 69893)

THERMO Shrink-fit chucks x1 x2

d3 d2 d1

4.5°

Radial runout ≤ 0,003 mm G2.5 at 25 000 min-1

d1 6 6 6 8 8 8 10 10 10 12 12 12 14 14 14 16 16 16 20 20 20 25 25 25 32 32

d2 21 21 21 21 21 21 24 24 24 24 24 24 27 27 27 27 27 27 33 33 33 44 44 44 44 44

d3 27 27 27 27 27 27 32 32 32 32 32 32 34 34 34 34 34 34 42 42 42 53 53 53 53 53

x1 85 130 160 85 130 160 90 130 160 95 130 160 100 130 160 100 130 160 105 130 160 115 130 160 120 160

x2 36 36 36 36 36 36 42 42 42 47 47 47 47 47 47 50 50 50 52 52 52 58 58 58 63 63

Code SF06.100A.085 SF06.100A.130 SF06.100A.160 SF08.100A.085 SF08.100A.130 SF08.100A.160 SF10.100A.090 SF10.100A.130 SF10.100A.160 SF12.100A.095 SF12.100A.130 SF12.100A.160 SF14.100A.100 SF14.100A.130 SF14.100A.160 SF16.100A.100 SF16.100A.130 SF16.100A.160 SF20.100A.105 SF20.100A.130 SF20.100A.160 SF25.100A.115 SF25.100A.130 SF25.100A.160 SF32.100A.120 SF32.100A.160

100 Form A+C

29

HSK ISO 12164 (DIN 69893)

“3 in 1” THERMO Shrink-fit chucks Internal coolant supply

x1 x2 4.5° d3 d2 d1

Radial runout ≤ 0,003 mm G2.5 at 25 000 min-1

1 - Open

100 Form A+C

d1 6 6 8 8 10 10 12 12 14 14 16 16 18 18 20 20 25 32

d2 21 21 21 21 24 24 24 24 27 27 27 27 33 33 33 33 44 44

d3 27 27 27 27 32 32 32 32 34 34 34 34 42 42 42 42 53 53

x1 85 130 85 130 90 130 95 130 95 130 100 130 100 130 100 130 115 120

x2 36 36 36 36 42 42 47 47 47 47 50 50 50 50 52 52 58 63

2 - Closed

3 - High speed

Code SF06.100A.085.IK SF06.100A.130.IK SF08.100A.085.IK SF08.100A.130.IK SF10.100A.090.IK SF10.100A.130.IK SF12.100A.095.IK SF12.100A.130.IK SF14.100A.095.IK SF14.100A.130.IK SF16.100A.100.IK SF16.100A.130.IK SF18.100A.100.IK SF18.100A.130.IK SF20.100A.100.IK SF20.100A.130.IK SF25.100A.115.IK SF32.100A.120.IK

Including high speed nozzles and sealing plugs

30

HSK ISO 12164 (DIN 69893)

Extended “3 in 1” THERMO Shrink-fit chucks

Internal coolant supply

x1

x2 4.5°

2°

d3 d2 d1

Radial runout ≤ 0,003 mm G2.5 at 25 000 min-1

1 - Open

d1 6 6 8 8 10 10 12 12 16 14 16 14 16 16 18 18 20 20 25 25 32 32

2 - Closed

3 - High speed

d2 20 21 20 21 20 21 20 21 24 24 24 24 27 27 27 27 33 33 33 33 44 44 44 44

d3 27 33 35.5 27 27 33 35.5 27 32 37 32 40 32 37 32 40 39.5 34 42.5 34 39.5 42.5 46.5 49.5 46.5 49.5 58 60.5 58 60.5

x1 160 80 130 200 160 80 130 200 160 80 130 200 160 90 130 200 160 90 130 200 160 200 160 200 160 200 160 200 160 200

x2 36 36 36 36 42 42 47 47 50 47 50 47 50 50 50 50 52 52 58 58 63 63

Code SF06.100A.160.IK SF06.40A.080.IK SF06.100A.200.IK SF06.40A.130.IK SF08.100A.160.IK SF08.40A.080.IK SF08.100A.200.IK SF08.40A.130.IK SF10.100A.160.IK SF10.40A.080.IK SF10.100A.200.IK SF10.40A.130.IK SF12.100A.160.IK SF12.40A.090.IK SF12.100A.200.IK SF12.40A.130.IK SF14.100A.160.IK SF16.40A.090.IK SF14.100A.200.IK SF16.40A.130.IK SF16.100A.160.IK SF16.100A.200.IK SF18.100A.160.IK SF18.100A.200.IK SF20.100A.160.IK SF20.100A.200.IK SF25.100A.160.IK SF25.100A.200.IK SF32.100A.160.IK SF32.100A.200.IK

100 Form A+C

Including high speed nozzles and sealing plugs Vibration-dampening tapered profile

31

HSK ISO 12164 (DIN 69893)

End mill holders d2

Radial runout ≤ 0,003 mm

d1

x1

G6.3 at 25 000 min-1

100 Form A+C

32

d1 6 6 6 6 6 8 8 8 8 8 10 10 10 10 10 12 12 12 12 12 14 14 14 14 14 16 16 16 16 16

d2 25 25 25 25 25 28 28 28 28 28 35 35 35 35 35 42 42 42 42 42 44 44 44 44 44 48 48 48 48 48

x1 80 100 120 160 200 80 100 120 160 200 80 100 120 160 200 80 100 120 160 200 80 100 120 160 200 80 100 120 160 200

Code WE06.100A.080 WE06.100A.100 WE06.100A.120 WE06.100A.160 WE06.100A.200 WE08.100A.080 WE08.100A.100 WE08.100A.120 WE08.100A.160 WE08.100A.200 WE10.100A.080 WE10.100A.100 WE10.100A.120 WE10.100A.160 WE10.100A.200 WE12.100A.080 WE12.100A.100 WE12.100A.120 WE12.100A.160 WE12.100A.200 WE14.100A.080 WE14.100A.100 WE14.100A.120 WE14.100A.160 WE14.100A.200 WE16.100A.080 WE16.100A.100 WE16.100A.120 WE16.100A.160 WE16.100A.200

HSK ISO 12164 (DIN 69893)

End mill holders Radial runout ≤ 0,003 mm

d1

d2

x1

G6.3 at 25 000 min-1

d1 18 18 18 18 18 20 20 20 20 20 25 25 25 25 32 32 32 32 40 40 50

d2 50 50 50 50 50 52 52 52 52 52 65 65 65 65 72 72 72 72 72 72 72

x1 80 100 120 160 200 80 100 120 160 200 100 120 160 200 100 120 160 200 110 160 125

Code WE18.100A.080 WE18.100A.100 WE18.100A.120 WE18.100A.160 WE18.100A.200 WE20.100A.080 WE20.100A.100 WE20.100A.120 WE20.100A.160 WE20.100A.200 WE25.100A.100 WE25.100A.120 WE25.100A.160 WE25.100A.200 WE32.100A.100 WE32.100A.120 WE32.100A.160 WE32.100A.200 WE40.100A.110 WE40.100A.160 WE50.100A.125

100 Form A+C

33

HSK ISO 12164 (DIN 69893)

End mill holders Slim execution

x1

d3 d2 d1

Radial runout ≤ 0,003 mm G6.3 at 25 000 min-1

100 Form A+C

34

d1 6 6 6 8 8 8 10 10 10 12 12 12 14 14 14 16 16 16 18 18 18 20 20 20 25 25 25 32 32 32

d2 17 17 17 21 21 21 24 24 24 27 27 27 29 29 29 33 33 33 35 35 35 39 39 39 47 47 47 57 57 57

d3 26 27 37 30 32 41 33 35 44 37 38 47 39 40 49 43 44 53 45 46 55 49 50 59 57 58 67 67 68 70

x1 130 160 200 130 160 200 130 160 200 130 160 200 130 160 200 130 160 200 130 160 200 130 160 200 130 160 200 130 160 200

Code WE06.100A.130F WE06.100A.160F WE06.100A.200F WE08.100A.130F WE08.100A.160F WE08.100A.200F WE10.100A.130F WE10.100A.160F WE10.100A.200F WE12.100A.130F WE12.100A.160F WE12.100A.200F WE14.100A.130F WE14.100A.160F WE14.100A.200F WE16.100A.130F WE16.100A.160F WE16.100A.200F WE18.100A.130F WE18.100A.160F WE18.100A.200F WE20.100A.130F WE20.100A.160F WE20.100A.200F WE25.100A.130F WE25.100A.160F WE25.100A.200F WE32.100A.130F WE32.100A.160F WE32.100A.200F

HSK ISO 12164 (DIN 69893)

End mill holders

Internal coolant supply

x1

d2 d1

Radial runout ≤ 0,003 mm G6.3 at 25 000 min-1

d1 6 8 10 12 14 16 18 20 25 32 40

d2 25 28 35 42 44 48 50 52 65 72 72

x1 80 80 80 80 80 100 100 100 100 100 110

Code WE06.100A.080.IK WE08.100A.080.IK WE10.100A.080.IK WE12.100A.080.IK WE14.100A.080.IK WE16.100A.100.IK WE18.100A.100.IK WE20.100A.100.IK WE25.100A.100.IK WE32.100A.100.IK WE40.100A.110.IK

100 Form A+C

35

HSK ISO 12164 (DIN 69893)

ER Collet chucks x1

d1

Radial runout ≤ 0,003 mm G6.3 at 25 000 min-1

100 Form A+C

36

ER 16 16 16 25 25 25 32 32 32 40 40 40

Range 0.5 - 10 0.5 - 10 0.5 - 10 1 - 16 1 - 16 1 - 16 2 - 20 2 - 20 2 - 20 3 - 26 3 - 26 3 - 26

x1 100 160 200 100 160 200 100 160 200 120 160 200

d1 28 28 28 42 42 42 50 50 50 63 63 63

Code ER16.100A.100 ER16.100A.160 ER16.100A.200 ER25.100A.100 ER25.100A.160 ER25.100A.200 ER32.100A.100 ER32.100A.160 ER32.100A.200 ER40.100A.120 ER40.100A.160 ER40.100A.200

HSK ISO 12164 (DIN 69893)

ER Collet chucks Mini execution

x1

d1

Radial runout ≤ 0,003 mm G6.3 at 25 000 min-1

ER 11 11 16 16 20 20 25 25

Range 0.5 - 7 0.5 - 7 0.5 - 10 0.5 - 10 1 - 13 1 - 13 1 - 16 1 - 16

x1 100 160 100 160 100 160 100 160

d1 16 16 22 22 28 28 35 35

Code ER11.100A.100M ER11.100A.160M ER16.100A.100M ER16.100A.160M ER20.100A.100M ER20.100A.160M ER25.100A.100M ER25.100A.160M

100 Form A+C

Collet chucks 1:10 for DIN 6388 collets x1

d1

Radial runout ≤ 0,003 mm G6.3 at 25 000 min-1

Range 1.5 - 16 2 - 25 4 - 32

x1 110 120 130

d1 43 60 72

Code SP16.100A.110 SP25.100A.120 SP32.100A.130

100 Form A+C

37

HSK ISO 12164 (DIN 69893)

Morse taper holders for mills x1

d1

Radial runout ≤ 0,005 mm G6.3 at 25 000 min-1

100 Form A+C

MK 1 2 3 4 5

x1 100 120 150 175 200

d1 25 32 40 48 63

Code MK1A.100A.100 MK2A.100A.120 MK3A.100A.150 MK4A.100A.175 MK5A.100A.200

Morse taper holders for drills x1

d1

Radial runout ≤ 0,005 mm G6.3 at 25 000 min-1

100 Form A+C

38

MK 1 2 3 4 5

x1 100 120 150 170 200

d1 25 32 40 48 63

Code MK1B.100A.100 MK2B.100A.120 MK3B.100A.150 MK3B.100A.170 MK4B.100A.200

HSK ISO 12164 (DIN 69893)

Threaded shank milling cutter holders x1 A

d3 d2 M

Radial runout ≤ 0,003 mm G2.5 at 25 000 min-1

M M8 M8 M8 M10 M10 M10 M12 M12 M12 M16 M16 M16

A 50 100 150 50 100 150 50 100 150 50 100 150

x1 79 129 179 79 129 179 79 129 179 79 129 179

d2 13 13 13 18 18 18 21 21 21 29 29 29

d3 20.5 30 34.5 21.5 31 35.5 23.5 32 39.5 33.5 36 42.5

Code EF08.100A.079 EF08.100A.129 EF08.100A.179 EF10.100A.079 EF10.100A.129 EF10.100A.179 EF12.100A.079 EF12.100A.129 EF12.100A.179 EF16.100A.079 EF16.100A.129 EF16.100A.179

100 Form A+C

39

HSK ISO 12164 (DIN 69893)

Combi shell mill holders for milling cutters d2

Radial runout ≤ 0,005 mm

d1

x1

G6.3 at 25 000 min-1 l1

100 Form A+C

40

d1 16 16 16 22 22 22 27 27 27 32 32 32 40 40 40

x1 60 100 160 60 100 160 60 100 160 60 100 160 70 100 160

x2 50 90 150 48 88 148 48 88 148 46 86 136 56 86 146

d2 32 32 32 40 40 40 48 48 48 58 58 58 70 70 70

x2

l2 27 27 27 31 31 31 33 33 33 38 38 38 41 41 41

Code KD16.100A.060 KD16.100A.100 KD16.100A.160 KD22.100A.060 KD22.100A.100 KD22.100A.160 KD27.100A.060 KD27.100A.100 KD27.100A.160 KD32.100A.060 KD32.100A.160 KD32.100A.100 KD40.100A.070 KD40.100A.100 KD40.100A.160

HSK ISO 12164 (DIN 69893)

Shell mill holders for cutters with driving slot

Internal coolant supply

x1

Radial runout ≤ 0,005 mm

d2 d1

l1

G6.3 at 25 000 min-1

d1 16 16 16 16 16 22 22 22 22 22 27 27 27 27 27 32 32 32 32 32 40 40 40 40 40 60

x1 45 100 130 160 200 50 100 130 160 200 50 100 130 160 200 50 100 130 160 200 60 100 130 160 200 80

l1 17 17 17 17 17 19 19 19 19 19 21 21 21 21 21 24 24 24 24 24 27 27 27 27 27 29

d2 38 38 38 38 38 50 50 50 50 50 60 60 60 60 60 78 78 78 78 78 89 89 89 89 89 40

Code AD16.100A.045 AD16.100A.100 AD16.100A.130 AD16.100A.160 AD16.100A.200 AD22.100A.050 AD22.100A.100 AD22.100A.130 AD22.100A.160 AD22.100A.200 AD27.100A.060 AD27.100A.100 AD27.100A.130 AD27.100A.160 AD27.100A.200 AD32.100A.060 AD32.100A.100 AD32.100A.130 AD32.100A.160 AD32.100A.200 AD40.100A.060 AD40.100A.100 AD40.100A.130 AD40.100A.160 AD40.100A.200 AD60.100A.080

100 Form A+C

41

HSK ISO 12164 (DIN 69893)

Holders for indexable inserts drills x1

d2 d1

Radial runout ≤ 0,005 mm G6.3 at 25 000 min-1

100 Form A+C

d1 20 25 32 40

x1 90 95 100 110

d2 40 45 52 60

Code VB20.100A.090 VB25.100A.095 VB32.100A.100 VB40.100A.110

Quick-change tapping heads d1

x1

Length compensation in compression and tension.

100 Form A+C

42

Tap size M3 - M14 M5 - M22 M14 - M33

Compensation ± 7.5 ± 12.5 ± 20

Insert size 1 2 3

x1 80 100 144

d1 36 53 78

Code GN12.100A.080 GN20.100A.100 GN33.100A.144

HSK ISO 12164 (DIN 69893)

Blank bars x1

Cone and flange hardened and finished.

Machineable soft body. d1

Pre-balanced

d1 95 95 95

x1 160 200 250

Code RL95.100A.160 RL95.100A.200 RL95.100A.250

100 Form A+C

Test bars x1

Radial runout ≤ 0,003 mm d1

Precisely ground length and diameter.

Test certificate and protective case supplied.

d1 50

x1 250

Code TB50.100A.250

100 Form A+C

43

HSK ISO 12164 (DIN 69893)

44

HSK ISO 12164 (DIN 69893)

45

HSK ISO 12164 (DIN 69893)

46

HSK ISO 12164 (DIN 69893)

47

Find additional information and product catalogues

www.sab.hr

SAB d.o.o.

Podborska 1b / 43500 Daruvar tel. + 385 43 675 850 fax. + 385 43 334 700 sab@sab.hr / www.sab.hr Note: Product photos and illustrations are not binding. Product descriptions, technical specifications and dimensions are binding only when explicitly agreed upon. We reserve right to make technical modifications as well as price changes. We take no liability for print or type errors. Only our terms and conditions are valid. 09/2020