First editionconnections for general use and fluid power — ports and stud ends with iso 228- 1 threads with elastomeric or metal- to- metal sealing — part 2: heavy- duty ( s series) and light- duty ( l series) stud ends with elastomeric sealing ( type e). iso/ iec: provides the means for understanding and associating the individual parts of iso/ iec 11179 and is the foundation for a conceptual understanding of metadata and metadata registries. this part of iso 1179 specifies dimensions for ports with iso 228- 1 threads for use with non- adjustable stud ends shown in iso 1179- 2, isoand isoand with adjustable stud ends shown in iso 1179- 3. power iso 1179 — ports and of stud ends following connections for general use and fluid — with iso 228■ 1 threads with elastomeric or metal■ to■ metal sealing: — part 1: threaded ports — part 2: heavy■ duty ( s series) and light■ duty ( l series) stud ends with elastomeric sealing ( type e). general technical iso— flat face port with british standard pipe, parallel ( bspp) threads ( din 3852, part 2) iso 228- 1 “ g” threads d4 ( mm) eolastic seal ( type e) o- ring and retaining ring ( types g & h) 3 thread size ( iso/ 8- 28 1/ 4- 19 3/ 8 19 1/ 2- 14 3/ / / d3 ( mm) 9. iso/ iec: is applicable to the formulation of data representations, concepts, meanings and relationships to be shared among. 13m, fed- std- h28/ 21 un/ unf* ansi b1. 4300 catalog general technical iso— flat face port with british standard pipe, parallel ( bspp) threads ( din 3852, iso 228- 1, table t26 — port detail — isoconforms to proposed revision.
pdf iso 1179- 2: now withdrawn iso 1179- 2: stage: 95. isothirdconnections for general use and fluid power — ports and stud ends with iso 228- 1 threads 2: with elastomeric or metal- to- metal sealing — heavy- duty ( s series) and light- duty ( l series) stud ends with elastomeric sealing ( iso 1179 pdf type e). it is also important to note that with these bspp threaded connections, the seal occurs on the port surface, or spotface, not in an o- ring gland or chamfer as sae and iso- 6149 straight thread do. iso 1479 was prepared by technical committee iso/ tc 2, fasteners, subcommittee sc 13, fasteners with non- metric thread. 3) see page n6 for o- ring and retaining ring ordering information. this second edition cancels and replaces the first edition ( iso 1479: 1983), which has been technically revised. into a female bspp port ( iso 1179), however, the seal is cre- ated with one of the aforementioned sealing methods, not with the threads. iso 1179- 2: connections for general use and fluid power — ports and stud ends with iso 228- 1 threads with elastomeric or metal- to- metal sealing — part 2: heavy- duty ( s series) and light- duty ( l series) stud ends with elastomeric sealing ( type e). 99 revised by published iso 1179- 2: connections for general use and fluid power — ports and stud ends with iso 228- 1 threads with elastomeric or metal- to- metal sealing — part 2: heavy- duty ( s series) iso 1179 pdf and light- duty ( l series) stud ends with elastomeric sealing ( type e). product details overview iso 1179- 1: specifies dimensions for ports with iso 228■ 1 threads for use with non- adjustable stud ends described in iso 1179■ 2, iso 1179■ 3 and iso 1179■ 4 and with adjustable stud ends described in iso 1179■ 3. iso 1179- 1: specifies dimensions for ports with iso 228■ 1 threads for use with non- adjustable stud ends described in iso 1179■ 2, iso 1179■ 3 and iso pdf 1179■ 4 and with adjustable stud ends described in iso 1179■ 3. ports in accordance with iso 1179- 1: are applicable for use with iso 1179■ 2 heavy- duty ( s series) stud ends with type e sealing at working pressures up to 63 mpa ( 630. users of this part of iso 1179 should ensure that there is sufficient pdf material around the port to maintain the pressure. isowas prepared by technical committee iso/ tc 131, fluid power systems, subcommittee sc 4, connectors and similar products and components. 2) 90 durometer nitrile is standard for hydraulic applications. this first
edition of iso 1179- 3, together with iso 1179- 1, isoand iso 1179- 4, cancels and replaces iso 1179: 1981 which has been technically revised. iso shall not be held responsible for identifying any or all such patent rights.
iso 1179 consists of the following parts, under the general title connections iso 1179 pdf for general use and fluid power — ports and stud ends with iso 228- 1 threads with elastomeric or metal- to- metal sealing:. iso 139, textiles — standard atmospheres for conditioning and testing iso 1130, textile fibres — some methods of sampling for testing iso 1973, textile fibres — determination of linear density — gravimetric method and vibroscope method iso 2602, statistical interpretation of test results — estimation of the mean — confidence interval bspt bs 21, iso 7/ 1 bspp bs 2779, iso 228/ 1 metric iso 261, ansi b1. ports in accordance with iso 1179- 1: are applicable for use with iso 1179■ 2 heavy- duty ( s series) stud. pdf iso 6605, hydraulic fluid power — test methods for hoses and hose assemblies iso 6743- 4, lubricants, industrial oils and related products ( class l) — classification — part 4: family h ( hydraulic systems) iso 6803, rubber or plastics hoses and hose assemblies — hydraulic- pressure impulse test without flexing. buy iso 1179- 1: connections for general use and fluid power ports and stud ends with iso 228- 1 threads with elastomeric or metal- to- metal sealing part 1: threaded ports from sai global. first editionconnections for general use and fluid power — ports and stud ends with iso 228- 1 threads with elastomeric or metal- to- metal sealing — part 3: light- duty ( l series) stud ends with sealing by o- ring with retaining ring ( types g and h). 1, fed- std- h28/ 2 * class 2a or 2b table g1 — thread conformance standards table g2 — standard material specifications for industrial pipe fittings and adapters introduction this section contains adapters with thread types including:.