Issuu on Google+

everything for the lab Biotech AB – your single provider of HPLC and fluidic scientific customized parts & assemblies

New High Flow Degasser

2

For ordering & informtion – Telephone +46 (0)300-56 91 80. Fax +46 (0)300-56 91 81. www.biotech.se


Product Advance Sheet

Systec

®

High-Flow Degasser

IDEX Health & Science’s Systec® High-Flow Degasser is a non-porus, air-permeable membrane activated by a controlled vacuum source capable of removing dissolved air from liquids at a rate of up to one liter per minute in OEM instruments. The High-Flow Degasser is designed to degas liquids in high-throughput applications such as clinical chemistry analyzers to prevent bubble formation and improve dispense precision. Accommodating a broad range of fluids including aqueous salts, organics, detergents, and sterilizing agents, the High-Flow Degasser incorporates the longest-life pump available on the market with membrane materials chosen to reduce maintenance and provide the lowest total cost of ownership.

TECHNICAL DATA Part Number

Dispense Precision, Long Life

Operational flow rate (mL/min)

Removes dissolved gases and bubbles from fluidic lines to improve dispense precision ff Longest lifetime pump and membrane materials are selected to reduce maintenance and provide best TCO ff Compatible with broad range of fluids including aqueous salts, organics, detergents and sterilizing agents (pH range: 2–13) ff Highest efficiency membrane reduces unit size, which increases available benchtop space ff Tested and calibrated assembly is ready for installation ff

Pressure Drop (@ 20 °C & Max Flow) Internal Volume Degassing Efficiency (Removed O2% in DI Water @ Max Flow)

Number of Channels Wetted Materials External Fluidic Ports Maximum Operating Pressure: Maximum Temperature

0001-6706 0 - 1,000 < 15 kPa < < 45 mL > 50% 1 Polysulfone, silicone rubber, polypropylene, Tygon S-50-HL, medical grade adhesives 3/16 inch (4.8 mm) ID Barb Fittings < 2 Barg 40 °C

Biotech AB Box 133, 439 23 Onsala, Sweden TEL: +46 300 569180 FAX: + 46 300 569181 E-mail: info@biotech.se URL: www.biotech.se Eastern Plastics

I Innovadyne I Ismatec I Isolation Technologies I Rheodyne I Sapphire Engineering I Systec I Upchurch Scientific


Product Advance Sheet

Systec High-Flow Degasser 6.1” 155 mm

6.1” 155 mm

8.4” 212 mm

4.1” 105 mm

4.1” 105 mm

3.9” 100 mm

3.9” 100 mm

8.4” 212 mm 4.1” 4.1” 105 mm105 mm 6.1” 6.1” 155 mm155 mm

3.9” 3.9” 100 mm100 mm

8.4” 8.4” 212 mm212 mm

EXHAUST: 1/8" ID TUBE EXHAUST: 1/8" ID TUBE CONNECTION [ 3.2 mm ] [ 3.2 mm ] CONNECTION 3/16" ID TUBE 3/16" ID TUBE CONNECTION [ 4.8 mm ] [ 4.8 mm ] CONNECTION

1.25” 1.25” 31.8 mm Control 31.8 mm Pump

6.0” 152 mm

6.0” 152 mm

3.5”

3.5” 89 mm

89 mm Specifications

EXHAUST: 1/8" ID 1/8" TUBEID TUBE EXHAUST: CONNECTION [ 3.2 mm[ 3.2 ] mm ] CONNECTION 3/16" ID3/16" TUBEID TUBE CONNECTION [ 4.8 mm[ 4.8 ] mm ] CONNECTION

Power Requirements

24 VDC at 0.85 amp max. (0.5 amp typical)

International Power Adapter Included 1.1” 1.1”

AC adapter: 100–240 V AC, 1A, 50–60 Hz (for North America, UK, continental Europe, Japan, Australia)

Vacuum Sensor Calibration Accuracy

±5 mm Hg absolute over an ambient operating temperature range of 10–35 °C (NIST traceable)

Closed-Loop Control Setpoint

120 mm Hg absolute (pump runs at high rpm until near setpoint, then speed is varied to maintain a value of 120 mm Hg absolute — load independent)

27 mm

27 mm

Green - Blinking LED Indicators Single Bi-Color

Errors Detected

Green - Solid Amber - Blinking

Vacuum reaches upper control range Vacuum reaches 8.3” control set point 211 mm Power on, vacuum operating normally

Amber - Solid

Error condition, shutdown

1 - Pumpdown

Unable to reach 120 mm Hg (16 kPa) in 10 minutes

2 - High Vacuum

Vacuum > 200 mm Hg (26.7 kPa) for > 10 minutes

3 - Sensor Signal

Sensor > 800 mm Hg (106.7 kPa) or < 10 mm Hg (1.3 kPa)

Biotech AB Box 133, 439 23 Onsala, Sweden TEL: +46 300 569180 FAX: + 46 300 569181 E-mail: info@biotech.se URL: www.biotech.se

6.0” 6.0” 152 mm152 mm 1.25” 1.25” 31.8 mm31.8 mm

3.5” 3.5” 89 mm 89 mm

1.1” 1.1” 27 mm 27 mm

7.5” 7.5” 191 mm191 mm

7.5” 191 mm

7.5” 191 mm

8.3” 8.3” 211 mm211 mm

8.3” 211 mm

Internal structure

Tygon® is a registered trademark of Saint-Gobain Performance Plastics Corporation Teflon® is a registered trademark of E.I. du Pont de Nemours and Company, used under license by Upchurch Scientific. Only DuPont makes Teflon®. Systec® is a registered trademark of IDEX Health & Science LLC ©2011 IDEX Health & Science LLC IDX1353-PS-HS/6.2011

www.idex-hs.com I North/South America +1 866 339 4653 I Europe +49 1801 808 800 I Asia +86 10 6566 9090

Eastern Plastics

I Innovadyne I Ismatec I Isolation Technologies I Rheodyne I Sapphire Engineering I Systec I Upchurch Scientific


view from our office windows

bioteCh Biotech Sweden is a company highly specialized in chromatography accessories and consumables. Biotech is located on the Swedish Westcoast – south of Gothenburg – at the beautiful Onsala peninsula, covering 15.000 sq.m. land and 700 sq.m. production and office area.

Affiliated companies: Biotech USA LLC 281 County Road C2W, Roseville MN 55113, USA mstorkamp@biotechusa.us Biotech India Pvt Ltd Mumbai 400-099, India Banking Reference:

a simple philosophy... We at Biotech believe that value is not ”the lowest price” – our customers are the reason we exist – our customers always come

Handelsbanken Kungsbacka Branch, Sweden Fax +46 300 334 29

We accept visa® and masterCard® - no minimum order.

first. We have not lost sight where we come from and therefore we try harder to be your partner, we’re not satisfied unless you are satisfied. Thank you for your business. I know we’ll continue to grow and prosper together.

Biotech AB. P.O. Box 133, SE-439 23 Onsala, Sweden. Telephone +46 (0)300-56 91 80. Fax +46 (0)300-56 91 81 info@biotech.se – www.biotech.se

2

For ordering & informtion – Telephone +46 (0)300-56 91 80. Fax +46 (0)300-56 91 81. www.biotech.se


Biotech_High_Flow_Degasser_0001-6706_May_2012