GUARD POWER™ SDAC

The GUARD POWER™ Simple Deck Alarm Cabinet (SDAC) is a solar-powered, low-cost High Level (HL) and Overfill Level (HHL) alarm panel ideal for open deck mounting onboard coastal and river barges and other shore facilities. The SDAC is cleverly built to detect a series of connected alarm sensors sounding a common HL and HHL audible and visual local alarm with two Independent Alarm Control Units.

External alarms include red and amber strobe lighting, an electronic sounder with distinct tones and a blue LED power fail low voltage indicator. A built-in power fail alarm function and a low power level warning are included. The panel also comes with Intrinsically Safe shore alarm connection relays (voltage free) for API shore connect receptacles. The built-in solar panel charges a primary and secondary power source either of which can be used as the power fail source.

With its solid-state design, built-in Intrinsically Safe barrier circuits and the automatic by-pass switch, the SDAC assures safe loading under all conditions.

LOW COST LOW POWER DECK ALARM CABINET.

SMALL SINGLE SOLAR PANEL AND FRAME INCLUDED.

ALL SS NEMA 4X (IP67) ENCLOSURE.

TWO INDEPENDENT ALARM CONTROL UNITS.

SERIES CONNECTED HIGH LEVEL (HL) AND OVERFILL LEVEL (HHL) LEVEL ALARMS.

TWO 12VDC SEALED BATTERIES PROVIDE PRIMARY 12V OPERATION AND ONE AS BACK-UP THROUGH SWAP SWITCH INSIDE CABINET.

FAIL SAFE SHORE CONNECT CONTACTS.

175,000 CP STROBE LIGHTS AND 108dB HORNS.

BRIGHT YELLOW AND RED LONG-LASTING LEDS PROVIDE TANK ALARM STATUS.

GUARD LEVEL® MTDE

The GUARD LEVEL® Multifunction Tank Display

Ex. (MTDE) is a heavy-duty explosion-proof remote display when used with existing GUARD LEVEL® MCU and GUARD LEVEL® DAC+ control panels providing a complete tank and alarm display in hazardous areas.

Smartly designed large LED displays are readable up to 30 feet or more for ullage, level, volume, pressure, tank temperature and independent High Level (HL) and Overfill Levels (HHL). Multiple MTDE’s can be daisy-chained with a 4C cable (Power & Data) and are ideal for on-deck or manifold area displays.

Acknowledging the alarm from any MTDE or the unit can be configured to only accept acknowledgment from the MTDE located near the tank in alarm.

ALL UNITS CHANGE TO TANK IN LEVEL ALARM, AND THEN AFTER PRESET TIME DEFAULT BACK TO ASSIGNED TANK AFTER ACKNOWLEDGMENT.

CAST BRONZE HOUSING AND STAINLESS SUN SHADE.

EXPLOSION PROOF CLASS 1, DIV. 1 DEVICE.

POWERED BY 24VDC SOURCE.

LARGE LED DISPLAYS ARE READABLE TO 30FT OR MORE FOR ULLAGE, LEVEL, VOLUME, PRESSURE, TANK TEMPERATURE, AND INDEPENDENT HIGH LEVEL (HL) AND OVERFILL LEVEL (HHL) ALARMS.

TANKERMAN CAN READ AND ACKNOWLEDGE ALARMS OF ALL TANKS FROM ONE UNIT.