GUARD VALVE® SERIES

The GUARD VALVE® series of products are designed for manual control of non-rising submerged cargo and ballast valves and give a clear indication of the valve position even from afar.

The main components are a heavy-duty stainless-steel handwheel, a deck stand with attached valve position indication and stuffing box, a reach rod and a stainless-steel yoke with appropriate sizes for direct fitting to the valve stem. All parts can be customized to meet any requirements.

The deck stand and associated valve position indication can be welded directly to the deck plate or, if required, be fitted for a flanged connection (three or four inches).

Unique features include a DELRIN® thrust bearing which eliminates weight and associated wear on the valve. And, with the sliding yoke assembly design, the valve can be replaced without lifting the reach rod assembly.

VALVE CONTROL AND INDICATOR FOR NON-RISING STEM SUBMERGED CARGO AND BALLAST VALVES

DIRECT WELDING TO 3” OR 4” PIPE

AVAILABLE REACH RODS IN SIZE: (1”, 1-1/4” AND 1-1/2”) STEM ADAPTOR AND HAND-WHEELS

SLIP YOKES ALLOW FOR EASY CHANGE OUT OF VALVE

INTEGRAL STUFFING BOX WITH TRIPLE SEAL (TEFLON AND VITON)

PULL YOUR BELOW DECK VALVE WITHOUT REMOVING REACH ROD ASSEMBLY

COLOR CODED VALVE POSITION INDICATOR WITH REFLECTIVE TAPE FOR ON-THE–SPOT VISUAL VERIFICATION

AVAILABLE FLANGE MOUNTING

ACCEPTS VALVES WITH 15-25 TURNS

BERGAN SLIP YOKE ALLOWS FOR THE YOKE TO BE UNBOLTED SLIPPED UP OUT OF THE WAY RE-PINNED

ZERO WEIGHT ON VALVE HEAD. ALL WEIGHT DISTRIBUTED ON STUFFING BOX, STANDPIPE AND TANK TOP