LEVEL FAMILY LEVEL (LIFT) (TWIN)
DELTA (HIGH) BY BENE
CLASSIC (LIFT)
ONE PLATFORM, MANY POSSIBILITIES. The LEVEL platform forms the structural basis for a series of versatile, ergonomic desks from Bene. Various frame options – whether classic, homely, or minimalist – offer a wide range of design possibilities, while the functional platform in the background ensures stability, technology, and comfort. LEVEL desks are available in both fixed height and electric height-adjustable versions. They enable flexible workstations that meet the demands of
modern office environments – whether for focused seated work or dynamic standing tasks. Available as single workstations or as the double workstation version LEVEL (LIFT) TWIN, they offer solutions for different spatial concepts and team structures – from private offices to open team zones. This results in individual solutions built on a shared foundation – flexible in form, consistent in quality.
INSPIRING OFFICES. SINCE 1790.
LEVEL LEVEL FAMILY
LEVEL FAMILY LEVEL (LIFT)
LEVEL LIFT 2
LEVEL PURE (LIFT)
LEVEL PURE LIFT 2
CONSU
FIXED HEIGHT
FIXED HEIGHT
FIXED HE
LEVEL
LEVEL PURE
CONSUL
LEVEL TWIN
LEVEL PURE TWIN
HEIGHT ADUSTABLE
HEIGHT ADUSTABLE
HEIGHT ADUSTABLE
HEIGHT ADUSTABLE
HEIGHT A
LEVEL LIFT
LEVEL LIFT 2
LEVEL PURE LIFT
LEVEL PURE LIFT 2
CONSUL
LEVEL LIFT TWIN
LEVEL LIFT 2 TWIN
LEVEL PURE LIFT TWIN
LEVEL PURE LIFT 2 TWIN
LEVEL LIFT PRO
LEVEL LIFT 2 PRO
DELTA (LEVEL)
DELTA PURE (LEVEL PURE)
FIXED HEIGHT
FIXED HEIGHT
DELTA BY BENE
DELTA PURE BY BENE
DELTA HIGH BY BENE
DELTA PURE HIGH BY BENE
CLASSIC (LEVEL)
CLASSIC PURE (LEVEL PURE)
CLASSIC PURE LIFT 2 (LEVEL PURE LIFT 2)
FIXED HEIGHT
FIXED HEIGHT
FIXED HEIGHT
CLASSIC
CLASSIC PURE
CLASSIC PURE LIFT 2
CLASSIC LIFT (LEVEL LIFT)
CLASSIC LIFT 2 (LEVEL LIFT 2)
CLASSIC PURE LIFT (LEVEL PURE LIFT)
HEIGHT ADUSTABLE
HEIGHT ADUSTABLE
HEIGHT ADUSTABLE
CLASSIC LIFT
CLASSIC LIFT 2
CLASSIC PURE LIFT
ELECTRIC HEIGHT ADJUSTMENT RASTOMAT ALSO AVAILABLE WITH ROUND COLUMN DESIGN ALSO AVAILABLE WITH DELTA WOOD DESIGN
2 © Bene GmbH, 08/2026
LEVEL LEVEL FAMILY
LEVEL FAMILY CONSULT PURE
CONSULT PURE LIFT 2
LEVEL PURE (LIFT) MEETING
FIXED HEIGHT
FIXED HEIGHT
CONSULT PURE
LEVEL PURE MEETING QUATTRO SINGLE- / MULTI-PART TABLETOP
LEVEL PURE LIFT 2 MEETING
LEVEL PURE MEETING SINGLE- / MULTI-PART TABLETOP
LEVEL PURE MEETING HIGH SINGLE- / MULTI-PART TABLETOP HEIGHT ADUSTABLE
HEIGHT ADUSTABLE
HEIGHT ADUSTABLE
HEIGHT ADUSTABLE
CONSULT PURE LIFT
CONSULT PURE LIFT 2
LEVEL PURE LIFT MEETING SINGLE- / MULTI-PART TABLETOP
LEVEL PURE LIFT 2 MEETING SINGLE- / MULTI-PART TABLETOP
LEVEL PURE LIFT MEETING QUATTRO SINGLE- / MULTI-PART TABLETOP
LEVEL PURE LIFT 2 MEETING QUATTRO SINGLE- / MULTI-PART TABLETOP
DELTA PURE MEETING (LEVEL PURE MEETING) FIXED HEIGHT
DELTA PURE MEETING BY BENE SINGLE- / MULTI-PART TABLETOP
DELTA PURE MEETING HIGH BY BENE SINGLE- / MULTI-PART TABLETOP
ELECTRIC HEIGHT ADJUSTMENT RASTOMAT ALSO AVAILABLE WITH ROUND COLUMN DESIGN ALSO AVAILABLE WITH DELTA WOOD DESIGN
3 © Bene GmbH, 08/2026
LEVEL PRODUCT DESCRIPTION
PRODUCT DESCRIPTION The LEVEL family is divided into four table types.
LEVEL
LEVEL TWIN
LEVEL variants · without height adjustment · height adjustment by rastomat for the sitting height
LEVEL TWIN variants · without height adjustment · height adjustment by rastomat for the sitting height
LEVEL LIFT
LEVEL LIFT TWIN
LEVEL LIFT variants · height adjustment by manual switch for the sitting and standing height
LEVEL LIFT TWIN variants · height adjustment by manual switch for the sitting and standing height
LEVEL LIFT PRO A LEVEL LIFT with high quality materials and design values. · MDF table top with waterfall edge · Fenix black · nanotech matte surface · round column · manual switch Premium with sensor · divided sliding top · frame panel
4 © Bene GmbH, 08/2026
LEVEL PRODUCT DESCRIPTION - LEVEL
PRODUCT DESCRIPTION - LEVEL
1
3
4 2
T-leg, C-leg, Classic, Delta, Delta wood, Delta High or Delta High wood frame with 10 mm floor compensation. Various tabletop shapes: chipboard 19 mm or 25 mm with 2 mm mono edge, compact board 13 mm or MDF 25 mm with 1 mm mono bevel edge. 1
Tabletop
2
Support bracket
3
Multi-function head
4
Central frame
5
Column
6
Cantilever leg
7
Rastomat
6
5
1
3
4 2
7
6 5
5 © Bene GmbH, 08/2026
LEVEL PRODUCT DESCRIPTION - LEVEL TWIN
PRODUCT DESCRIPTION - LEVEL TWIN T-leg frame with 10 mm floor compensation. Various tabletop shapes: chipboard 19 mm or 25 mm with 2 mm mono edge, compact board 13 mm or MDF 25 mm with 1 mm mono bevel edge. 1
2
9
4
3
1
Tabletop
2
Support bracket
3
Multi-function head
4
Central frame
5
Column
6
Combination leg
7
Column protection
8
Cover
9
Rastomat
5
6
8
5 7 5 6 6 7
6 © Bene GmbH, 08/2026
LEVEL PRODUCT DESCRIPTION - LEVEL / LEVEL TWIN
PRODUCT DESCRIPTION - LEVEL / LEVEL TWIN Tables without height adjustment have a fixed height of 740 mm.
HEIGHT ADJUSTMENT BY RASTOMAT · height adjustment range for seat height: 620 – 860 mm · height adjustment in 10 mm increments · without tools, using mechanical Rastomat function
7 © Bene GmbH, 08/2026
LEVEL PRODUCT DESCRIPTION - LEVEL LIFT
PRODUCT DESCRIPTION - LEVEL LIFT
1
3
4 2
A solid desk for alternating at work between sitting and standing. T-leg or C-leg frame with 10 mm floor compensation. Various tabletop shapes: chipboard 19 mm or 25 mm with 2 mm mono edge, compact board 13 mm or MDF 25 mm with 1 mm mono bevel edge. 1
Tabletop
2
Support bracket
3
Multi-function head
4
Central frame
5
Control unit or power supply unit
6
Manual switch
7
Lift column
8
Cantilever leg
9
Corner column
10
Support column
7 5
8
6
4 2 1
5
3 9
7 6
8
1
4
5 2
3
7
10 6 8
The warranty period for electrical and electromechanical parts used in this table is 5 years. Covered by Bene’s warranty conditions (Bene product warranty DB-ZFP-400). © Bene GmbH, 08/2026
8
LEVEL PRODUCT DESCRIPTION - LEVEL LIFT TWIN
PRODUCT DESCRIPTION - LEVEL LIFT TWIN T-leg frame with 10 mm floor compensation. Various tabletop shapes: chipboard 19 mm or 25 mm with 2 mm mono edge, compact board 13 mm or MDF 25 mm with 1 mm mono bevel edge. 5 1
Tabletop
2
Support bracket
3
Multi-function head
4
Central frame
5
Control unit or power supply unit
6
Manual switch
7
Lift column
8
Combination leg
9
Column protection
10
Cover
1
2
4
3
7
8
10
6
7
9
8 7
8
9
The warranty period for electrical and electromechanical parts used in this table is 5 years. Covered by Bene’s warranty conditions (Bene product warranty DB-ZFP-400). © Bene GmbH, 08/2026
9
LEVEL COLUMN TYPES
COLUMN TYPES Available in black, white, or aluminium. Levelling: +10 mm with adjustment screws LEVEL LIFT C-leg, rectangular powdered 80 x 50 mm steel profile pipe, cantilever legs: die-cast aluminium frame
ADDITIONAL INFO FOR CANTILEVER LEG
T-leg, rectangular powdered 80 x 50 mm steel profile pipe, T-leg column can be configured with two different cantilever legs. LIGHT: cantilever leg - more affordable entry-level cantilever leg - welded canted steel plate - powder-coated
Table depth (mm)
DESIGN: die cast cantilever leg - die-cast aluminium - high stability - high form and design quality, tailored to the platform - powder-coated
800
900
750 mm
x
-
850 mm
-
x
x
-
Design (for rectangular or round columns)
Light (for rectangular columns) 703 mm
T-leg, round powdered Ø70 mm steel profile pipe, cantilever legs: die-cast aluminium frame
LEVEL
LEVEL LIFT TWIN rectangular column powdered 99,5 x 60 mm steel profile pipe
LEVEL TWIN
LEVEL LIFT
HEIGHT ADJUSTMENT
for 2-part column 25 mm - 1.204 19 mm - 1.198 13 mm - 1.192
25 mm - 866 19 mm - 860 13 mm - 854 25 mm - 746 19 mm - 740 13 mm - 734
LEVEL LIFT TWIN
HEIGHT ADJUSTMENT for 2-part column rastomat
1-part column fixed height
round column powdered 99,5 x 80 mm steel profile pipe
25 mm - 709 19 mm - 703 13 mm - 697
25 mm - 626 19 mm - 620 13 mm - 614
for 3-part column 25 mm - 1.304 19 mm - 1.298 13 mm - 1.292
25 mm - 644 19 mm - 638 13 mm - 632
NOTE Frame type 1 Table depth 600 700 800 900 1.000
x x x x x
Tabletop shapes x K1 x W3
Cantilever leg Light
Cantilever leg length changes depending on depth. The corner column with a extension dimension of 600 mm, is designed as a T-leg. 3 Only possible with 3-part column with increased collision protection. 1 2
x x x
x x x
x2 x
x
x Measurements in mm
© Bene GmbH, 08/2026
10
LEVEL COLUMN TYPES
COLUMN TYPES Every electrically height-adjustable table in the LEVEL family has at least two lifting columns (angled and combination tables: three lifting columns, TWIN tables: four lifting columns). Each lifting column has an electric motor. The following types of columns are used for LEVEL LIFT / LEVEL LIFT TWIN.
TWO-PART/THREE-PART TELESCOPIC RECTANGULAR COLUMN FOR 2-COLUMN TABLES
THREE-PART TELESCOPIC RECTANGULAR COLUMN / ROUND COLUMN FOR MULTI-COLUMN TABLES
· radius column R5 · without visible glides · two-part rectangular column (DL5 IC); stroke length: 495 mm or · three-part rectangular column (DL6 IC); stroke length: 660 mm · lifting force 500 N / column · basic software collision protection with EASY hand control · increased collision protection with BASIC manual switch with sensor and PREMIUM with sensor · control integrated in column Master / follower system (two different columns per table) · manual switch is connected directly to master column · external power supply included
· radius column R5 · without visible glides · 3-part rectangular column (DL6 PLUS) - stroke length: 660 mm or · 3-part round column (DL11 PLUS*) - stroke length: 660 mm · lifting force 800 N / column · basic software collision protection with EASY hand control · increased collision protection with BASIC manual switch with sensor and PREMIUM with sensor · two identical columns per table · hand switch is connected to control unit · separate control unit with integrated power supply included
Maximum load 75 kg (PC, PC holder, T-Panel, etc. must be included in the calculation!)
Maximum load 100 kg (PC, PC holder, T-Panel, etc. must be included in the calculation!)
Type · Power supply input 100 V AC to 240 V AC, 50 Hz/60 Hz · Maximum on-time 2 min. on, 18 min. off · Protection category II · Noise ~46 dB · Upward lift speed 38 mm/s
Type · Power supply input 230 V AC, 50 Hz · Maximum on-time 2 min. on, 18 min. off · Protection category II · Noise ~43 dB · Upward lift speed 38 mm/s
Reference values for power consumption Load Power consumption · Stand-by 0,1 watts · Upward lift 75 kg 175 watts
Reference values for power consumption Load Power consumption · Stand-by 0,1 watts · Upward lift 100 kg max. 300 watts / 450 watts
The following columns (with separate control) are ALWAYS used for SELECTION/ PREPARATION with attachment table and for W3 or K1 · 3-part rectangular column (DL6 PLUS) - stroke length: 660 mm or · 3-part round column (DL11 PLUS*) - stroke length: 660 mm · lifting force 800 N / column
* round column type is also used for 2-column tables
11 © Bene GmbH, 08/2026
LEVEL FRAME TYPES
FRAME TYPES The heights shown all refer to the upper edge of the desk when 25 mm chipboard is being used. In the case of 19 mm chipboard and 13 mm compact top, the desk height is reduced accordingly.
740
700 150
740
850 DELTA HIGH 740 150 740 · Rectangular pipe 60700 x 30 mm, steel · Levelling: +10 mm by means of adjustment leg · Range of height adjustment: 1.070 mm fixed
740
650
200
650
200
1304 1304 660660 644644
119 49549 703703
546
546
200
740 740
200 200 650 650
740 740
1.070
1.070
740
1.070
850
1.070
700 150
740
1.070
850
850
650
740740
850 850
850
850
DELTA WOOD · Wooden tube 57 x 53.5 mm, to steel pipe · Levelling: +10 mm by means of adjustment leg · Range of height adjustment: 740 mm fixed
700 150 DELTA HIGH WOOD
850 850 150 150 700 700
740 740
150150 700700
622
715
1204 1204 495495 709709
850850 150150 CLASSIC LIFT 1, 2 700700 · Thickness of slab-end 38 mm, chipboard for melamine, 39 mm, chipboard for veneer, fastening construction and cover plate made of steel · Levelling: +10 mm by means of adjustment leg · Range of height adjustment: 2-part column 709 - 1.204 mm 3-part column 644 - 1.304 mm
DELTA · Rectangular pipe 60 x 30 mm, steel · Levelling: +10 mm by means of adjustment leg · Range of height adjustment: 740 mm fixed or height adjustable between 650 - 850 mm
850850
740740
CLASSIC 1, 2 · Thickness of slab-end 38 mm, chipboard for melamine, 39 mm, chipboard for veneer, fastening construction and cover plate made of steel · Levelling: +10 mm by means of adjustment leg · Range of height adjustment: 740 mm fix or in 20 mm grid with tool
1.070 850
740
700 150
74
· Wooden tube 57 x 53.5 mm, to steel pipe · Levelling: +10 mm by means of adjustment leg · Range of height adjustment: 1.070 mm fixed
1 2
not possible in combination with desktop shape rectangle RE with Soft Edge not possible in combination with communication segment and extension fitting (only valid for Classic frame with fixed height)
© Bene GmbH, 08/2026
12
LEVEL MANUAL SWITCH (ELECTRIC HEIGHT ADJUSTMENT)
MANUAL SWITCH (ELECTRIC HEIGHT ADJUSTMENT) HEIGHT ADJUSTMENT WITH MANUAL SWITCH There are three different types of manual switch. MANUAL SWITCH EASY
MANUAL SWITCH BASIC WITH SENSOR
MANUAL SWITCH PREMIUM BT WITH SENSOR
Dimension: W: 60 mm, H: 15,8 mm Colour: Anthracite grey Functions: up/down function, operation via buttons
Dimension: W: 82 mm, H: 28,8 mm Colour: Black Functions: up/down function, intuitively operated element, with integrated collision protection sensor
Dimension: W: 82 mm, H: 28,8 mm Colour: Black Functions on manual switch: up/down function, intuitively operated element, with integrated collision protection sensor, graphic display. 4 memory positions, key lock, upper and lower limit of table height, functionality via Desk ConnectTM, app: setting the 4 memory positions, saving the upper and lower limit of the table height and reminder function on the mobile phone. Menu navigation german and english. Remote control or automatic movement of the table by mobile phone is not permitted due to the Machinery Directive and is therefore not possible!
Intuitive operation The manual switches (BASIC WITH SENSOR and PREMIUM BT WITH SENSOR) are operated via a tilt function instead of buttons so that direct visual contact with the hand control is not necessary when adjusting the height of the table.
HANDSET OVERVIEW
EASY control via button
BASIC WITH SENSOR
PREMIUM BT WITH SENSOR
•
•
•
control via paddle memoryposition
4
app via bluetooth
•
reminder function via Desk Connect app
•
desk hight limit container-/shelfstop
•
basic collision protection increased collision protection sensor integrated in manual switch graphic display
•
•
•
•
13 © Bene GmbH, 08/2026
LEVEL MANUAL SWITCH (ELECTRIC HEIGHT ADJUSTMENT)
MANUAL SWITCH (ELECTRIC HEIGHT ADJUSTMENT) MANUAL SWITCH POSITIONS It is possible to choose the positioning of the switch, as either protruding or flush with the table top, and either on the left or right-hand side of the desk. The manual switch Easy can only be selected in the protruding position.
Protruding
Flush
14 © Bene GmbH, 08/2026
LEVEL OVERVIEW AND DIMENSIONS
OVERVIEW AND DIMENSIONS TABLETOP 19 mm / 25 mm chipboard, 19 mm chipboard with Fenix, 13 mm compact tabletop or 25 mm MDF with Fenix TABLETOP SHAPES - BASIC TABLES LEVEL & LEVEL LIFT Rectangular RE
User side rounded NG
Rectangular RE with Soft Edge
1.000 - 2.000
1.400 - 2.000
1.000 - 2.000 Corner radius Soft Edge Melamine / Fenix: 60 mm Veneer: 70 mm
600 | 700 800 | 900 1.000
600 | 700 800 | 900 1.000
Combination desk K1
Angle desk W3
700 800 | 900 1.000
1.732 | 2.078,4
1.600 - 2.000 1.200 1.600
1.192,8 1.292,8
LEVEL TWIN & LEVEL LIFT TWIN Rectangular RE
Rectangular RE with Soft Edge
1.000 - 2.000
User side rounded NG
1.000 - 2.000
1.400 - 2.000 Corner radius Soft Edge Melamine / Fenix: 60 mm Veneer: 70 mm
1.705
1.705
1.705
TABLETOP SHAPES - COMMUNICATION SEGMENTS 1
Attachment table 4 600
LEVEL / LEVEL LIFT
700
800 - 2.000
400 1.000
400 800
700
600
400
900
400
400 900
800
400
1.000
400 700
600
400
800
900
Lateral over 1 table rounded MU 400
800 - 2.000
800 600
Lateral over 1 table rectangular MV 400
Further installation desk 3
1.000
not possible in combination with Classic frame with fixed height
2
only avaible for LEVEL
3 only avaible for LEVEL (fixed and rastomat) with the table top shapes RE, NG, K1, W3, not in combination with RE with Soft Edge
400 900
800
700
1
1.000
400 800
700
600 600
400
900
400
400
1.000
Lateral over 2 tables rectangular ME 2
Lateral over 2 tables rounded MR 2
1.000
900
400
4 LEVEL LIFT with attachment table, main table must be equipped with increased collision protection! When refitting an attachment table, the 2-channel control must be replaced by a 3-channel control.
Delta frame: seat height from depth of 700 mm, standing height from depth of 800 mm Measurements in mm
1.000
5
900
800
700
400 800
400 700
400 600 600
400
15 © Bene GmbH, 08/2026
LEVEL OPTIONS
OPTIONS Options for LEVEL, LEVEL LIFT, LEVEL TWIN and LEVEL LIFT TWIN. The following are available for these tabletop shapes. The properties of the options always apply for one tabletop.
RE, NG
RE, NG
K1
W3
Options Cable gap
•
•
•
•
Grommet hole / bFRIENDS Power Module
•
•
•
•
Wireless charger
•
•
•
-
Tiltable cable tray L
•
•
only visitor side
•
Cable chain
•
•
•
•
Plug board bracket for cable tray L
•
•
•
•
CPU holder
•
•
•
•
Cable flap
•
•
•
-
Cable Box
•
•
•
•
Plug Box
•
•
•
•
Preparation for connection to T-Panel
•
•
only visitor side
on request
Connection to T-Panel Extend
•
-
only visitor side
-
Covering caps
•
•
•
•
Modesty panel
•
-
only visitor side
-
Sliding top
•
•
-
Divided sliding top
•
•
-
-
Frame panels
•
•
-
-
Cable cover
•
•
-
-
Spacers
•
only lateral
•
only lateral
Cable management
•
•
•
•
Excess length of desk top
•
•
•
-
Bag hook
•
•
•
•
16 © Bene GmbH, 08/2026
LEVEL OPTIONS
OPTIONS 1
2
Cable gap Fixed positions. 1 or 2 cable gaps are possible per tabletop: left/right/left and right. Dimension: Width 350 mm, depth 45 mm Not possible for cable flap or divided sliding top.
7 4
1
6
RE, NG
2
K1
W3
3
Grommet hole Fixed positions. 1 or 2 grommet holes are possible per tabletop: left/right/left and right. Cover colour: black, white, or aluminium Not possible with cable flap or sliding top. RE, NG
K1
W3
3
Cable chain & textile cable collector for further info product data sheet „cable- & media management“
4
Plug board bracket for cable tray L To fix the connection plug board in the cable tray. Colour: Black
5
CPU holder Maximum load: 30 kg Maximum height of computer: 450 mm
5
6
Bag hook attached to the head piece with screws, powder-coated steel in black, white or aluminium, Dimensions: height 100 mm, width 32 mm, depth 46,8 mm
7
Cable tray L tiltable mounted on the frame Colours: Black, white, or aluminium Space from bottom to cable tray: 600 mm (at the lowest position) 181 mm 210 mm
58 mm
17 © Bene GmbH, 08/2026
LEVEL OPTIONS
OPTIONS CENTRAL CABLE TRAY - LEVEL TWIN & LEVEL LIFT TWIN Covering can be rotated and mounted on the combination leg. Colours: Black, white, or aluminium LEVEL (LIFT) TWIN with rectangular column: the central cable tray can be deselected as an option. LEVEL TWIN with round column: the central cable tray can be deselected as an option. LEVEL LIFT TWIN with round column: the central cable tray is always technically required and cannot be deselected (it serves as a safeguard against twisted installation) RE, NG
290 mm 120 mm
closed
right side open, cable tray can be opened on both sides
CABLE FLAP Fixed positions. Possible positions: central/left/right. Central: table widths of up to 1.300 and 1.400 mm or greater, left/right: table widths of 1.600 mm or greater Not possible in combination with cable outlet, cable gap, or sliding top. RE, NG
K1
CABLE BOX The cable box enables quick and easy access to the cable tray. The plastic frame and the metal flap are available in white, black or aluminum.
PLUG BOX The plug box is milled flush into the table top and can be equipped with a connection plug board. The metal flap are available in black or aluminum.
· max. 2 units per table top possible · position per desktop shape specified as fixed · position in the centre up to desk width of 1.399 mm · position left / right / left and right from desk width of 1.400 mm
· Flap can only be opened from one side via “Push to open”. · max. 2 units per table top possible · position per desktop shape specified as fixed · position in the centre up to desk width of 1.399 mm · position left / right / left and right from desk width of 1.400 mm
Cannot be combined with sliding top and cable flap. Cannot be combined with sliding top and cable flap. Cable Box 327 x 152 mm
RE, NG
K1
Plug box 315 x 125 mm
W3
RE, NG
K1
W3
18 © Bene GmbH, 08/2026
LEVEL OPTIONS
OPTIONS WIRELESS CHARGER The wireless charger can be installed in the front area of the tabletop on the left or right and enables wireless charging of a compatible device. The recess for the wireless charger is milled into the tabletop from below. A sticker is attached to the tabletop to indicate where the charging module is located. The wireless charger is a separate item, must be ordered separately (simple configuration via the pCon.planner META planning) and cannot be retrofitted. Technical data · diameter 80 mm · black housing · charging power 5 W · compatibility works with all devices that support wireless charging with the Qi standard. · works with most lightweight mobile phone cases (< 3 mm) · water resistance class IP-43 · silent / active mode (for the quietest possible charging process) Scope of delivery · wireless charger · power cable 1,5 m (available plug types A, D, F, L) · sticker to stick on the tabletop (labelling: position of wireless charger) · assembly material (cable clips, screws) Possible positions of the wireless charger Fixed positions. One wireless charger per tabletop possible: concealed on the left or on the right Not possible in combination with the W3 tabletop. RE, NG
K1
19 © Bene GmbH, 08/2026
LEVEL OPTIONS
OPTIONS BFRIENDS POWER MODULE The bFRIENDS Power Module is available in three sizes - S, M and L. It can be fitted to all tables wherever a cable outlet is possible. An existing cable outlet hole (diameter 80 mm) can also be replaced by a Power Module. Installation in combination with a sliding table top or cable flap is not possible. More information on the possible colours and colour configurations Product data sheet „bFRIENDS“
bFRIENDS Power Module parts/structure
bFRIENDS Power Module types Type S with power socket or USB charging socket (A+C) charging port USB-A 18W / USB-C 22W
Type M with power socket or USB charging socket (A+C) charging port USB-A 18W / USB-C 22W
Type L with power socket and/or USB charging socket (A+C) charging port USB-A 18W / USB-C 22W (possible are: 2 x power socket | 2 x USB | 1 x power socket + 1 x USB)
1
USB-Charger (A+C) or power socket
2
Sleeve
3
Insert
4
Base
5
Fastener
Possible positions of the bFRIENDS Power Module Fixed positions. 1 or 2 cable outlet holes per panel possible: left / right / left and right Not possible in combination with sliding top and cable flap.
RE, NG
K1
W3
20 © Bene GmbH, 08/2026
LEVEL OPTIONS
OPTIONS PREPARATION FOR CONNECTION TO T-PANEL Mounting brackets are inserted into the consoles and fixed in place from below. The number of mounting brackets depends on the table width. Longitudinal holes in the console allow the gap to be adjusted from 2-25 mm. A rocker allows the T-Panel to be levelled. Possible with table depths of 800 mm or greater. Can also be connected to T-Panel Extend, not possible in combination with Delta High frame.
T-Panel
T-Panel Extend
T-Panel Extend Delta
More information Price list for T-Panel Pure, Multi, and Curve
COVERING CAPS Covering caps can be added to upgrade the table without preparation for connection to the T-Panel.
MODESTY PANEL Flush with the top edge of the table; height varies depending on table-top thickness. Available in 16 mm chipboard. Longitudinal holes in the console allow the gap to be adjusted from 0 - 20 mm. Assembly same as for T-Panel Curve / Pure. Black mounting bracket. Black, white or aluminium cover available. Not available in combination with LEVEL TWIN, LEVEL LIFT TWIN and with T-Panel.
SLIDING TOP/DIVIDED SLIDING TOP The sliding top has a sliding mechanism with a latching function for locking. It can be easily slid to the front by loosening the catch, allowing cable management access. Sliding top · Sliding length: 177 mm · at a table depth of 600 mm, the sliding distance is reduced by 50 mm · only makes sense in connection with a cable tray · not possible with cable flap or cable outlet · cable cover optional Divided sliding top · Sliding length: 107 mm · only with T-leg frame · only makes sense in connection with a cable tray · only for table depths 800 mm · not possible with cable flap or cable outlet · frame panel and cable cover optional
21 © Bene GmbH, 08/2026
LEVEL OPTIONS
OPTIONS
2a
FRONT/SLIDING PANELS The following options allow upgrading the table to include a divided sliding top. 2b
FRAME PANELS 1 This panel improves the visitor's side view of the table. The metal is screwed to the headpiece.
1
A small gap between it and the tabletop allows cables to be fed through. No T-Panel can be connected in combination with the frame panel. Available for table widths of 1.400, 1.600, and 1.800.
CABLE COVER 2 There are two different steel plate inserts. Their function is to cover the basic cabling 2a and provide the user another level for temporary cabling 2b . The first version is connected with metal hooks to the cable tray, but the second requires two connection plug board holders. They can be used to fix the connection plug board in place and fasten the trays with inserted magnet. The inserts can be used with all types of sliding tops and configured as desired. One of each version is always included in delivery. Available for table widths of 1.400, 1.600, and 1.800. Cable covers must be ordered separately.
CABLE MANAGEMENT The type of cable management is based on the column design. There are two basic systems. · Two-part/three-part column with basic collision protection Here the control system is integrated into the column. The column designated as “master” handles the connection to the second, the manual switch and the motor cable for the connection to the power supply unit. The power supply unit, in turn, is connected to the electrical grid through the power lead. · 3-part column with increased collision protection These columns always require a control system. All columns, the manual switch and the power lead are connected to this central component. Two lengths are available for the power lead with the plug types A, D, F, L: · 1.500 mm: to connect to a connection plug board in the cable tray (plug type L, only wwith increased collision protection: 2.000 mm) · 3.000 mm (columns without increased collision protection) or 3.200 mm (columns with increased collision protection): for a direct connection to a power socket in the building (e.g. floor tank)
Plug types A, F, L: straight plug D: angle plug OPTIONAL Tiltable cable tray L
Cable gap
Cable outlet
Cable box
bFRIENDS Power Module
Plug box
Cable chain
Plug board bracket for cable tray L
Extended cable management and technical description Price list cable and media management.
22 © Bene GmbH, 08/2026
LEVEL OPTIONS
OPTIONS SPACERS Spacers can be used to connect several tables. This ensures that the distance between the tables is kept constant and that a minimum clearance of 25 mm between the tables is not undershot, in order to prevent crushing or trapping caused by moving parts. Attention: The lateral spacers are different for the rectangular and the round column or the foot bracket. Please pay attention to this when configuring!
Spacers LEVEL & LEVEL LIFT
Included in the package: Two units, spacers must be ordered separately. Spacer positions LEVEL & LEVEL LIFT
25 mm
Colour: black
Spacer position LEVEL TWIN & LEVEL LIFT TWIN Spacer LEVEL TWIN & LEVEL LIFT TWIN, with integrated cable lead
25 mm
Colour: black
NOTE - SPACER ON VISITOR SIDE The visitor-side spacers (generally adjustable by 100 mm) are primarily intended for the installation of tables with T-panels. They allow the adjustment of a defined distance between two tabletops. Depending on the table depth or the column type, different distances between the tables result. The dimensions specified in the table always refer to the distance between two tabletops without T-panels. Attention: A minimum clearance of 25 mm between moving parts (e.g. two T-panels) must always be maintained to prevent crushing or trapping. Depth (mm)
T-leg min. 143 43 103 103 3
600 700 800 900 1.000
C-leg max. 243 143 203 203 103
min. 147 147 47
max. 247 247 147
Example At 2 x 800 depth with T-Panel Multi + distances, the result is 133 mm - according to the table, it works (between 103 and 203 mm). If the tables had a depth of 1.000 mm, it would not work (3 - 103 mm).
133
23 © Bene GmbH, 08/2026
LEVEL OPTIONS
OPTIONS EXCESS LENGTH OF DESK TOP Depending on the shape of the table top, the table top can be enlarged in different directions by the specified dimensions. Not available in combination with equal-sided 120° angle desk W3 . SINGLE WORKPLACE RE visitor side
left
right
left
left
right
visitor side: left: right: user side:
visitor side
right
visitor side lateral
lateral
user side
user side
0 - max. 100 mm 0 - max. 200 mm 0 - max. 200 mm 0 - max. 100 mm
K1 visitor side
visitor side
user side
visitor side: left: right: user side:
NG
0 - max. 100 mm 0 - max. 200 mm 0 - max. 200 mm 0 - max. 100 mm
visitor side: left: right: user side:
0 - max. 100 mm 0 - max. 200 mm 0 - max. 200 mm 0 - max. 100 mm
visitor side: 0 - max. 100 mm visitor side lateral: 0 - max. 100 mm lateral: 0 - max. 200 mm
LEVEL TWIN / LEVEL LIFT TWIN RE user side
user side
user side
central
central
central
right
left
central: left: right: user side:
NG
right
left
right
left
central
central
central
user side
user side
user side
0 - max. 39 mm 0 - max. 200 mm 0 - max. 200 mm 0 - max. 100 mm
central: left: right: user side:
0 - max. 39 mm 0 - max. 200 mm 0 - max. 200 mm 0 - max. 100 mm
central: left: right: user side:
0 - max. 39 mm 0 - max. 200 mm 0 - max. 200 mm 0 - max. 100 mm
24 © Bene GmbH, 08/2026
LEVEL COLOURS AND MATERIALS
COLOURS AND MATERIALS MATERIALS AND SURFACES The following materials and colours are available for this product. •. . . . . . . . . . available - . . . . . . . . . . not available
Tabletop Melamine Veneer Fenix
Chipboard • • -
Compact • • -
MDF •
Frame (T-leg, C-leg) 1 black white aluminium
Inner pipe • • •
Outer pipe • • •
Cantilever leg • • •
Classic
1
HC oak, natural
HD oak, graphite
Melamine
Veneer
Delta wood
SZ Black
Delta
AL aluminium
Frame is always single-coloured
WI white
1
Steel pipe
•
•
•
-
-
-
-
Metal parts
•
-
-
-
-
-
-
Wooden feet
-
-
-
•
•
-
-
Chipboard
-
-
-
-
-
•
•
MDF
-
-
-
-
-
•
•
Fastening construction 1
•
•
•
-
-
-
-
bracket always AL aluminium; exceptions: Slab-end in MW white bracket WI white, slab-end MB Basalt bracket SZ black.
Options black white aluminium Melamine Veneer Fenix
Cable outlet • • • -
Cable tray • • • -
Cable flap • • •
Cable Box • • • -
Plugbox • • -
Restrictions on colour and panel combinations see following pages
25 © Bene GmbH, 08/2026
LEVEL COLOURS & MATERIALS
COLOURS & MATERIALS MELAMINE
MW white
MQ office white
MSW snow white 1
MC canvas
MP platinum
MA aluminium
MH stone grey 1
TM clay 1
MS slate
MD urban grey 1
MB basalt
MJG jade green 1
DISCONTINUATION: OCTOBER 2027
EZ oak vicenza 1
1
MEK oak kendal 1
MAK maple classic 1
MBK beech classic 1
NG walnut grey 1
MNP walnut pavia 1
not available for compact top
26 © Bene GmbH, 08/2026
LEVEL COLOURS & MATERIALS
COLOURS & MATERIALS VENEER
EF oak natural
EY oak sylt
EG oak grey
ER oak amaretto
EV oak vulcano
NF american walnut
NR walnut siena
NB walnut umbra
NA walnut anthracite
KD chestnut natural
KP chestnut brown
KQ chestnut grey
AK canadian maple
BJ bamboo
BG beech grey
BU beech natural
Veneers also available in matt finish.
FENIX™
white
black
METAL, POWDER-COATED
white
aluminium
black
27 © Bene GmbH, 08/2026