Issuu

FILO TABLE The Filo Table stands for concentration, communication and intelligent integration of media technology. It owes its lightness to the distinctive shape of its base, the “antlers” with four arms, which spread out to provide stability to the table and at the same time lend it its extraordinary visual effect.

The media panel provides access to electricity as well as data and image transmission (VGA & HDMI). An innovative media solution which is accommodated under the table, but is easily accessible. The table surface remainsv uninterrupted — visually calm — and free of cable flaps.

Design: EOOS

INSPIRING OFFICES. SINCE 1790.

FILO TABLE PRODUCT DESCRIPTION

PRODUCT DESCRIPTION 1

TABLETOP

25 mm chipboard (only for single part tables and Filo 4-Star) with straight edge or 25 mm MDF board with continuous, 20 degree chamfered edge. In split tables with 2 and 3 parts, you can decide between two different tabletop transitions.

20 degrees

FILO BASE WITH LEG CANTILEVER Table column: steel tube, powder-coated in black, Ø 62 mm Leg cantilever and antlers: polished aluminium or black matt Table height: 720, 740 or 760 mm The Filo base with leg cantilever is hung in the carrier profile under the tabletop.

90 degrees

Veneered surface, where split tables have a continuous veneer pattern.

FILO MEETING Split tables are available in 1, 2 and 3 parts.

Filo Meeting & Conference

Filo 4-Star

FILO CONFERENCE In O-, U- and V-arrangement.

2 2

FILO 4-STAR

2 © Bene GmbH, 08/2026

FILO TABLE DIMENSIONS

DIMENSIONS FILO MEETING 1-PART rectangular

FILO MEETING 2-PART rectangular

1.800 - 2.400

FILO MEETING 3-PART rectangular 4.900 - 7.200

2.500 - 4.800

1.000 - 1.400

Oval

1.800 - 2.400

1.000 - 1.400

2.500 - 4.800

1.000 - 1.400

4.900 - 7.200

1.000 - 1.400

Tischhöhen: 720, 740 oder 760 mm

FILO 4-STAR round

soft square 1.200 - 1.400

1.200 - 1.400

Tischhöhen: 720, 740 oder 760 mm

FILO CONFERENCE O arrangement

V arrangement

U arrangement

minimum arrangement

min. 3.960 mm

min. 2.580 mm

min. 2.454 mm

min. 3.960 mm

min. 3.708 mm

maximum arrangement

max. 20.000 mm

max. 19.996 mm

max. 20.110 mm

max. 20.000 mm

max. 15.792 mm

Dimensions in mm Legend panel edges

position of base

grain direction tabletops

3 © Bene GmbH, 08/2026

FILO TABLE OPTIONS

OPTIONS GROMMET HOLE The positions are predefined and cannot be changed. The grommet hole is either round or square. Only in combination with Filo 4-Star. Material & colour either square : AL aluminium, anodised or SZ leather, black, either round: CR Chrome Possible positions for Filo 4-Star round

soft square

PLUGBOX The positions are predefined and cannot be changed. Plugbox and connection plug boards that can be integrated  price list for cable and media management Plugbox flush-mounted in the tabletop. Material & colour: AL aluminium, anodised and SZ leather black

Possible positions for the meeting table rectangular

oval

rectangular

oval

Possible positions for the conference tables

Possible positions for 4-Star

rectangular

round

soft square

4 © Bene GmbH, 08/2026

FILO TABLE OPTIONS

OPTIONS MODESTY PANEL Aluminium profile frame covered with mesh fabric. The front panel has a fixed heightof 32 cm and is hung on the fittings in the frame of the table. Material & colour: Mesh_02 in black.

CABLE TORNADO For cable routing, a cable conduit in the form of a funnel is used. The cable tornado is hung in the carrier profile of the table and is tightened by the weight of a steel ring (powder-coated in black). The position of the tornado can be selected freely, since the carrier profile covers almost the entire width of the table. However, it cannot be in the same position as the media panel, the cable mesh and the Filo base with leg cantilever. Material & colour: Knit fabric, black.

CABLE MESH The cable mesh resembles a cable tray and is hung in the carrier profile of the table same as the cable tornado. The position of the mesh can be selected freely, since the carrier profile covers almost the entire width of the table. However, it cannot be in the same position as the media panel and the cable tornado. Material & colour: knit fabric, black.

CABLE CONDUIT Used for cabling of the Filo 4-Star tables. The thick conduit is fastened to the column of the base, while the thin conduit is used for cabling. Material & colour: knit fabric, black.

5 © Bene GmbH, 08/2026

FILO TABLE COLOURS AND MATERIALS

COLOURS AND MATERIALS MATERIALS AND SURFACES The following materials and colours are available for this product. • . . . . . . . . . . available, price acc. to price list - . . . . . . . . . . not available

Surfaces

Table top MDF board 25 mm

Table top Chipboard 25 mm

Frame

• -

• •

Melamine Veneer Polished aluminium Black matt powder-coated Veneer Bamboo: not possible for Filo multi-part meeting table. All veneers and varnished surfaces can also be selected in a matt version.

Included colour representations, restrictions on colour and panel combinations  see following pages or product data sheet „colours & materials“

6 © Bene GmbH, 08/2026

FILO TABLE COLOURS & MATERIALS

COLOURS & MATERIALS MELAMINE

MW white

MQ office white

MSW snow white

MC canvas

MP platinum

MA aluminium

MH stone grey

TM clay

MS slate

MD urban grey

MB basalt

MJG jade green

DISCONTINUATION: OCTOBER 2027

EZ oak vicenza

MEK oak kendal

MAK maple classic

MBK beech classic

NG walnut grey

MNP walnut pavia

EF oak natural

EY oak sylt

EG oak grey

ER oak amaretto

EV oak vulcano

NF american walnut

NR walnut siena

NB walnut umbra

NA walnut anthracite

KD chestnut natural

KP chestnut brown

KQ chestnut grey

AK canadian maple

BJ bamboo

BG beech grey

BU beech natural

VENEER

Veneers also available in matt finish.

FILO TABLE THE BENE RESPONSIBILITY

THE BENE RESPONSIBILITY Bene plays a pioneering role in the field of sustainability. This spans all company divisions – from product development, procurement, production, and logistics to product recycling. From the first sketch through to series production, ecological requirements are always an important factor in the product development process. It includes selecting environmentally compatible materials, such as certified timbers from sustainably managed forests, using recycled materials and increasing the use of renewable raw materials. Other important requirements for a sustainable product design are labelling the materials, their ability to be repaired, and a long service life for the components used, with the aim to integrate them into a second product life cycle. To guarantee a high recyclability standard for our products at the end of their service life, we avoid composites as much as possible and develop furniture that allows for disassembly by material type. Bene products are sourced and made in Europe. 99.9% of all deliveries reach us from a European country. Around 94% of all raw material supplies come from Austria and Germany. Around 93% of the raw materials comes from suppliers within 500 kilometres of our production site. SUSTAINABLE RAW-MATERIALS At Bene, the following materials are used as a matter of course: · chipboards low in formaldehyde · glues low in formaldehyde · water-based varnish systems · recyclable materials · materials with a high recycling share · PVC-free synthetics

Bene guarantees products free from: · CMR substances · halogenated solvents in synthetics · chlorinated hydrocarbons · heavy metal pigments · materials with azo pigments · Coatings with biocidal effects (such as wood preservatives, pesticides).

CONTRIBUTION TO BUILDING CERTIFICATIONS In the context of ecological building certification, design systems such as furniture and dividing walls help to achieve a good result and a higher score. Bene's products make a contribution towards the LEED, WELL Building Standard, DGNB, BREEAM, etc. certifications. Criteria include, for example, environmental product declarations, indoor air quality, acoustics and convertibility.

FILO TABLE Example configuration · Filo Table 4-Star · Round · 1.200 x 1.200 x 740 mm · Veneer · Total weight 95,60 kg Materials

Environmental key figures · 100 % sortable by type · 100 % recyclable · 56,0 % of contents are renewable raw materials · 22,9 % recycled production materials

Plastic 3.29 kg / 1.16 %

Aluminium 10.23 kg / 3.62 %

Steel 117.93 kg / 41.68 %

Wood 151.47 kg / 53.54 %

For each standard product configuration, Environmental Product Declarations (Lifecycle Data Sheets / LCDS) can be provided. These are prepared in accordance with EN ISO 14040, EN ISO 14044 and the applicable Product Category Rules (PCR) of the International EPD® System for UN CPC 3811, 3812 and 3814. The LCDS include the Product Carbon Footprint (PCF) covering the entire life cycle (cradle-to-cradle). Environmental information from Bene: https://bene.com/en/bene/sustainability