SPECIALS
PRICES VALID OCTOBER 31ST - NOVEMBER 10TH, 2023 Battery Pack
Tire Changers
Car Lifts
Shop Equipment
SHOW PRICE
1,635
$
Portable Lifts Air Coolers
#5150067 See page 46
SHOW PRICE
1,445
$
#5175635 See page 24
4-Post Lifts 2-Post Lifts
SHOW PRICE
2,050
$
#5150151 See page 47
Wheel Service
SHOW PRICE
6,350
$
#5175317 See page 11
SHOW PRICE
5,060
$
SHOW PRICE
5,415
$
#5140140 See page 32
#5175304 See page 4
1-800-253-2363 • bendpak.com/SEMA
Go to BendPak.com/Apparel
Apparel Now Available!
BendPak
ES T.
BE GENERAL DISCLAIMER
1965
C.
AM
ICAN OW ER
D
2-Post Clearfloor Lifts 2-Post Medium / Heavy Floor Plate Lifts 2-Post Heavy-Duty Clearfloor Lifts Light-Duty / Medium-Duty Home Garage 2-Post / 4-Post Lifts 4-Post Light-Duty Lifts 4-Post Medium-Duty Lifts 4-Post Heavy-Duty Lifts Lift Accessories Alignment Lifts & Alignment Packages Rolling Bridge Jacks Portable Column Lift Low-Rise / Mid-Rise / Full-Rise Lifts Portable Lifts & Portable 2-Post Lifts Parking & Storage Lifts Multi-Platform Parking Lifts Pipe Benders Air Compressors Power Units Portable Power Packs Wheel Service & Package Deals Tire Changers & Package Deals Wheel Balancers Wheel Service Accessories Diagnostics Brake Lathes / Wheel Aligner Spray Wash Cabinets / A/C Machine Creeper Chairs Jacks & Lifting Shop Equipment Portable Evaporative Air Coolers Industrial Ceiling Fans Portable Air Coolers
NE
4 5 8-9 10 11 12 13 14 15 18-19 20 21 22-23 24-25 26 27 28 29 30 31 32-33 34-35 36 37 38-39 40 41 42-43 44-45 46-48 49 50 51
Equipment models shown in this catalog may be available in different voltages upon request.
Table of Contents
N D PA K I N
BENDPAK warrants to the original purchaser only that all products shown in this catalog conform to BENDPAK published specifications and are free from defects in material or workmanship. In no event will BENDPAK be liable to you or to anyone else for any decision made or action taken by you or anyone else in reliance on information obtained from this catalog. BENDPAK has exclusive title and ownership rights, including all intellectual property right, throughout the world in all material and content contained on these pages. Materials, design, specifications, images and other content within this catalog are subject to change. BENDPAK does not take responsibility for improper use or any results thereof. BENDPAK products are provided and sold as is without any express or implied warranties including warranties of merchantability or fitness for particular purpose. In no event will BENDPAK be liable for any special, incidental, or consequential damages based on breach of warranty, breach of contract, negligence, strict tort, or any other legal theory. Damages that BENDPAK will not be responsible for include but are not limited to: loss of profits; loss of savings or revenue; loss of use of the product or any associated equipment; cost of capital; cost of any substitute equipment, facilities, or services; downtime; the claims of third parties, including customers; and injury to property. This limitation does not apply to damages caused by breach of the warranty of title and against infringements or to claims for personal injury. Unless modified in a writing signed by both parties, it is understood that BENDPAK published warranties are to be the complete and exclusive agreement between the parties. For complete and full warranty details contact BENDPAK at 1-800-253-2363 or visit www.bendpak.com.
1-800-253-2363 • bendpak.com/SEMA
3
2-Post Clearfloor Lifts BendPak 10AP Two-Post Lift #5175304
SHOW PRICE
5,060
$
5,495
$
• Lifting Capacity - 10,000 lbs. • Max. Rise - 69” • Width - 135” or 145” / Height - 145”
BendPak 10APX Two-Post Lift
SHOW PRICE
5,335
$
#5175306
NEW!
5,795
$
Includes Standard Screw Pads (set of 4) & Adapter Holders (set of 2)
• Lifting Capacity - 10,000 lbs. • Max. Rise - 75.5” • Width - 135” or 145” / Height - 157”
BendPak 10AP-168 Two-Post Lift #5175305
SHOW PRICE
5,425
$
5,895
$
NEW!
• Lifting Capacity - 10,000 lbs. • Max. Rise - 69” • Width - 135” or 145” / Height - 168”
BendPak 10APX-181 Two-Post Lift #5175307
SHOW PRICE
5,700
$
Features column extension for 24” of additional underclearance height for Euro-style cargo vans
6,195
$
• Lifting Capacity - 10,000 lbs. • Max. Rise - 75.5” • Width - 135” or 145” / Height - 181”
Includes Standard Screw Pads (set of 4) & Adapter Holders (set of 2)
SAVE
BIG! Asymmetric Configuration
10-AP
4
Symmetric Configuration
Triple-Telescoping Arms
Free shipping on most BendPak products to the 48 contiguous states.
Medium / Heavy Duty Floor Plate BendPak XPR-9S Short Floor Plate Two-Post Lift #5175308
SHOW PRICE
4,875
$
5,295
$
• Lifting Capacity - 9,000 lbs. • Max. Rise - 69” • Width - 132” or 145” / Height - 123.25”
BendPak XPR-12FDL Heavy-Duty Floor Plate #5175403
SHOW PRICE
7,910
$
8,595
$
Triple-Telescoping Arms
• Lifting Capacity - 12,000 lbs. • Max. Rise - 69” • Width - 155” / Height - 144”
BendPak 10AP-SRT Short Column Two-Post Lift #5175610
SHOW PRICE
4,780
$
5,195
$
• Lifting Capacity - 10,000 lbs. • Max. Rise - 42.5” • Width - 136” or 146” / Height - 93.5”
BendPak 12AP-SRT Short Column Two-Post Lift #5175605
NEW!
PERFECT FOR LOW CEILINGS!
SHOW PRICE
5,150
$
5,595
$ • Lifting Capacity - 12,000 lbs. • Max. Rise - 42.75” • Width - 155” / Height - 93.5”
TIRE SHOP ESSENTIALS
1-800-253-2363 • bendpak.com/SEMA
5
EV Battery Scissor Lift
ALL NEW EV BATTERY & POWERTRAIN LIFTING SYSTEM
4,500 LB. CAPACITY
NEW!
BendPak EV4500SL Portable EV Battery Lift SKU 5175613
• Platform Capacity - 4,500 lbs. • Max. Platform Height - 77.75" • Overall Length (handle stowed) - 72.75" • Overall Width - 53" • Platform Size - 63" x 42.75" • Magnetic Pendant Control • Stowable Push-Pull Handle • Includes 12-Volt Deep Cycle Battery
POWERTRAIN ADAPTERS
SEE PAGE 23 FOR PRICING PERFECT FOR EV BATTERY AND DRIVETRAIN SERVICE
DUAL HYDRAULIC CYLINDERS
6
Prices Valid October 31st - November 10th, 2023
SHIP, DELIVER & INSTALL. WE DO IT ALL. Shop Planning • Above Ground Lift Installation • Painless Equipment Delivery
SERVICE IS OUR SPECIALTY
WE SHIP
G PPIN E SHI *FRE !
At BendPak, we are dedicated to delivering your purchase as quickly and affordably as possible. All products marked FREE SHIPPING include FREE destination delivery to all direct shipping points within the 48 contiguous United States. For heavy equipment purchases, we offer a range of delivery and pick-up options so you can choose the shipping method that best meets your needs.
CTION FA
GU
WE DELIVER
ED
FREE SHIPPING*
SAT IS
BendPak has a network of installation and service teams throughout the United States authorized to provide installation and support on all of the products we sell. With over 700 service centers, you can rest assured that the products you purchase from BendPak are backed by a nationwide team of qualified service personnel. At BendPak, we’ve made a commitment to offer unparalleled service and support. More than just a seller, we want to be your automotive equipment partner for Iife.
ARANT
E
WE INSTALL
EASY TO ORDER – DELIVERED RIGHT TO YOUR DOOR
Ordering lifts or shop equipment from BendPak is fast and easy. Whether for the shop or home, we’ll make sure your order is delivered to you as fast and conveniently as possible. And we’ll arrange the installation and set-up as well if you wish. Placing an order takes just minutes. Either call and speak to one of our courteous specialists or place your order online and click your way through. If you ever need assistance or advice, our friendly consultants are only a phone call away. We look forward to serving you.
IF YOU FIND A LOWER PRICE, WE’LL MATCH IT OR BEAT IT - GUARANTEED.
UNB
If you find a lower price anywhere on an identical BendPak™ or Ranger™ brand product sold in the United States, show us the lower advertised price at the time of purchase and we will match it on the spot. Or show us the lower price within 14 days of your purchase and we will pay you the difference. We will not match other TABLE EA retailer’s mail-in rebates nor will we deduct the value of any gift with purchase.
RICE EE
!
P BendPak reserves the right to verify all information. Our low-price guarantee covers identical BendPak and LOW Ranger branded items with the same model number, features and U.S. warranty. The item must be in stock T GU ARAN and available for purchase at the price as advertised. We reserve the right to call and verify that the item is in stock and available for purchase at the price as advertised. Low price guarantee applies only to items shown in this flyer. Taxes, ad errors, closeouts, clearance, liquidation, free product offers, special orders, offers advertised at a specific location and refurbished items are also excluded from this guarantee.
1-800-253-2363 • bendpak.com/SEMA
7
Heavy-Duty Clearfloor BendPak XPR-12CL Clearfloor #5175405
SHOW PRICE
8,370
$
9,095
$
• Lifting Capacity - 12,000 lbs. • Max. Rise - 69” • Width - 155” / Height - 170”
BendPak XPR-15CL Clearfloor #5175408
SHOW PRICE
BendPak SHOW PRICE XPR-12CL-LTA Long-Reach $ Telescoping Arms
9,015
#5175258
9,795
$
• Lifting Capacity - 12,000 lbs. • Max. Rise - 69” • Width - 155” / Height - 170”
12,880
$
13,995
$
72" BendPak XPR-18CL Clearfloor #5175409
SHOW PRICE
14,535
$
15,795
$
• Lifting Capacity - 15,000 lbs. • Max. Rise - 69” • Width - 155” / Height - 170”
• Lifting Capacity - 18,000 lbs. • Max. Rise - 69” • Width - 155” / Height - 170”
FREE
14-Piece Adapter Set with any Heavy-Duty BendPak Lift.
8
Free shipping on most BendPak products to the 48 contiguous states.
Variability in Specifications and Features: All product specifications and features listed in this catalog are for reference only. For a more accurate and comprehensive listing of product specifications and features, visit www.bendpak.com. The contents of this catalog are subject to change.
BendPak XPR-12CL-192 #5175407
8,740
$
• Lifting Capacity - 12,000 lbs. • Max. Rise - 69” • Width - 155” / Height - 170”
BendPak XPR-15CL-192 #5175410
BendPak XPR-12CL-192-LTA
SHOW PRICE
#5175259
• Lifting Capacity - 12,000 lbs. • Max. Rise - 69” • Width - 155” / Height - 170”
9,495
$
SHOW PRICE
9,380
$
10,195
$
Long Reach Arms
BendPak XPR-18CL-192
SHOW PRICE
13,340
$
• Lifting Capacity - 15,000 lbs. • Max. Rise - 69” • Width - 155” / Height - 170”
#5175411
• Lifting Capacity - 18,000 lbs. • Max. Rise - 69” • Width - 155” / Height - 170”
14,495
$
SHOW PRICE
14,900
$
16,195
$
Features Bolt On Top Extension For Added 24” Clearance
FREE
14-Piece Adapter Set with any Heavy-Duty BendPak Lift.
ACCESSORIES: Replacement Polyurethane Tuf-Pad (Set of 4) #5700227
ONLY
65
$
Steel Lift Pads (60 mm) (Set of 4) #5215763
ONLY
155
$
Turf Maintenance Lift Kit #5174020
3,895
$
STARTING AT
3,585
$
166
$
(Fits GP-7, XPR-9S,XPR-10S, & 10AP Series)
1-800-253-2363 • bendpak.com/SEMA
9
Light-Duty / Medium-Duty Home Garage GrandPrix GP-7LCS Short Height #5175995
SHOW PRICE
4,505
$
GrandPrix GP-7LC Medium Height #5175996
4,895
SHOW PRICE
4,600
$
• Lifting Capacity - 7,000 lbs. • Width - 125” / Height - 118.5” • Max. Rise - 68”
SHOW PRICE
6,990
7,595
• Lifting Capacity - 9,000 lbs. • Max. Rise - 70” / Runway Length - 165.5” • Width - 114.5” / Length - 203”
• Lifting Capacity - 7,000 lbs. • Width - 125” / Height - 150” • Max. Rise - 78” By BendPak
GrandPrix GP-9XLT Tall / Long #5175257
SHOW PRICE
By BendPak
GP-7LCS
7,450
$
8,095
$
• Lifting Capacity - 9,000 lbs. • Max. Rise - 82” / Runway Length - 189.75” • Width - 114” / Length - 227”
By BendPak
GP-9 MODELS INCLUDE
Max. Rise 78 in.
Ceilings
$
10
13’
Fits 10 ft.
By BendPak
$
$
10’
Fits 9 ft. Ceilings • Lifting Capacity - 7,000 lbs. • Width - 125” / Height - 106.5” • Max. Rise - 58”
SHOW PRICE
4,965
$
5,395
$
9’
#5175254
#5175992
4,995
$
GrandPrix GP-9F Standard
GrandPrix GP-7 Tall Height
By BendPak
By BendPak
Polyethylene Drip Trays
Aluminum Approach Ramps
Mobile Jack Tray
Quick-Mount Casters
GP-9F
Prices Valid October 31st - November 10th, 2023
2-Post / 4-Post Lifts Dannmar D2-8F Two-Post Lift #5175316
SHOW PRICE
5,016
$
5,266
$
Dannmar D2-10C Two-Post Lift
SHOW PRICE
4,784
$
#5175314
5,134
$
Dannmar SHOW PRICE D2-10A Two-Post Lift $ #5175313
4,792
5,142
$
• Lifting Capacity - 8,000 lbs. • Max. Rise - 72” • Width - 132” or 145” / Height - 113”
• Lifting Capacity - 10,000 lbs. • Max. Rise - 69” • Width - 145.25” / Height - 145”
• Lifting Capacity - 10,000 lbs. • Max. Rise - 69” • Width - 143.5” / Height - 145”
Dannmar D2-12C Heavy Duty Two-Post Lift
Dannmar D2-15C Heavy-Duty Two-Post Lift
Dannmar D4-9 Package Four-Post Lift
#5175312
SHOW PRICE
6,860
$
7,810
$
#5175311
SHOW PRICE
8,761
$
#5175319
SHOW PRICE
6,995
$
9,311
7,345
$
$
• Lifting Capacity - 12,000 lbs. • Max. Rise - 69” • Width - 155.25” / Height - 168.75”
• Lifting Capacity - 15,000 lbs. • Max. Rise - 69” • Width - 155.25” / Height - 168.75”
• Lifting Capacity - 9,000 lbs. • Max. Rise - 70” / Runway Length - 165.5” • Width - 114.5” / Length - 203”
Dannmar D4-9X Package Four-Post Lift
Dannmar D4-12 Four-Post Lift
Dannmar D4-12A Alignment Four-Post Lift
#5175321
SHOW PRICE
7,470
$
7,865
$
• Lifting Capacity - 9,000 lbs. • Max. Rise - 82” / Runway Length - 189.75” • Width - 114.5” / Length - 227”
#5175317
SHOW PRICE
6,350
$
6,745
$
• Lifting Capacity - 12,000 lbs. • Max. Rise - 68.75” / Runway Length - 194.75” • Width - 127.5” / Length - 233.5”
1-800-253-2363 • bendpak.com/SEMA
#5175318
SHOW PRICE
7,784
$
8,284
$
• Max. 2 Wheel Align. - 163.5” / Max Rise - 68.75” • Capacity - 12,000 lbs. / Runway Length - 194.75” • Width - 127.5” / Length - 233.5”
11
4-Post Light-Duty BendPak HD-7P Narrow #5175510
SHOW PRICE
4,690
$
BendPak HD-7W Wide
SHOW PRICE
4,780
$
#5175120
5,095
BendPak HD-7PXW Super-Tall #5175516
5,195
$
SHOW PRICE
7,360
$
7,995
$
$
SUPER-TALL • Lifting Capacity - 7,000 lbs. • Max. Rise - 82” / Runway Length - 164” • Width - 100.25” / Length - 200”
BendPak HD-7500BLX Boat Lift #5175315
SHOW PRICE
6,345
$
• Lifting Capacity - 7,000 lbs. • Max. Rise - 82” / Runway Length - 164” • Width - 110.25” / Length - 200”
BendPak HD-75BXT Boat Lift
NEW!
6,895
SHOW PRICE
6,345
$
#5175251
$
• Lifting Capacity - 7,000 lbs. • Max. Rise - 140” / Runway Length - 188” • Width - 110.25” / Length - 224.5”
6,895
$
HD-7500BLX • Lifting Capacity - 7,500 lbs. • Max. Rise - 82” / Runway Length - 188.5” • Width - 132” / Length - 224”
• Lifting Capacity - 7,500 lbs. • Max. Rise - 82” / Runway Length - 213” • Width - 134” / Length - 249”
BendPak HD-7500PBX Ext. Height Boat Lift SHOW PRICE #5175320
7,910
$
8,595
$
HD-7500BLX
SUPER-TALL • Lifting Capacity - 7,500 lbs. • Max. Rise - 144.5” / Runway Length - 188.5” • Width - 132” / Length - 224.5”
12
Free shipping on most BendPak products to the 48 contiguous states.
4-Post Medium-Duty BendPak HD-9 Wide Standard #5175861
SHOW PRICE
4,600
$
BendPak HD-9ST Narrow Standard #5175860
4,995
SHOW PRICE
4,505
$
4,895
$
$
• Lifting Capacity - 9,000 lbs. • Max. Rise - 70” / Runway Length - 164” • Width - 110.25” / Length - 200”
• Lifting Capacity - 9,000 lbs. • Max. Rise - 70” / Runway Length - 164” • Width - 100.25” / Length - 200”
BendPak HD-9XL Wide Standard Long
BendPak HD-9XW Wide Tall Long
#5175859
SHOW PRICE
4,780
$
#5175863
5,195
$
• Lifting Capacity - 9,000 lbs. • Max. Rise - 70” / Runway Length - 188” • Width - 110.25” / Length - 224”
BendPak HD-9SWX Double Wide Tall Long #5175024
SHOW PRICE
4,875
$
5,295
$
• Lifting Capacity - 9,000 lbs. • Max. Rise - 82” / Runway Length - 188” • Width - 110.25” / Length - 224”
SHOW PRICE
BendPak HD-9STX Narrow Tall Long
SHOW PRICE
4,780
$
#5175862
5,195
$
• Lifting Capacity - 9,000 lbs. • Max. Rise - 82” / Runway Length - 188” • Width - 100.25” / Length - 224”
BendPak HD-9SW Double Wide Standard #5175023
SHOW PRICE
9,200
$
9,995
$
• Lifting Capacity - 9,000 lbs. • Max. Rise - 70” / Runway Length - 164” • Width - 202” / Length - 200”
HD-9ST
9,840
$
10,695
$
• Lifting Capacity - 9,000 lbs. • Max. Rise - 82” / Runway Length - 188” • Width - 202” / Length - 224”
1-800-253-2363 • bendpak.com/SEMA
13
4-Post Heavy-Duty BendPak HD-14T Super Tall #5175004
SHOW PRICE
6,900
$
BendPak HDS-14 Standard Length #5175170
SHOW PRICE
7,080
$
7,495
BendPak HDS-14X Extended Length #5175173
7,695
$
$
SHOW PRICE
7,540
$
8,195
$
• Lifting Capacity - 14,000 lbs. • Max. Rise - 82” / Runway Length - 195” • Width - 127.5” / Length - 234”
• Lifting Capacity - 14,000 lbs. • Max. Rise - 70” / Runway Length - 203” • Width - 131.75” / Length - 241”
• Lifting Capacity - 14,000 lbs. • Max. Rise - 70” / Runway Length - 233” • Width - 131.75” / Length - 271”
BendPak SHOW PRICE HDSO-14P Open Front $ Standard Length
BendPak HDS-18E Standard Length
BendPak SHOW PRICE HDS-27 Standard Length $
9,105
#5175152
#5175968
9,895
SHOW PRICE
19,040
$
20,975
#5175162
20,695
$
22,795
$
$
• Lifting Capacity - 14,000 lbs. • Max. Rise - 70” / Runway Length - 199” • Width - 143” / Length - 244”
• Lifting Capacity - 18,000 lbs. • Max. Rise - 61.25” / Runway Length - 257.5” • Width - 153.5” / Length - 312.75”
• Lifting Capacity - 27,000 lbs. • Max. Rise - 61.25” / Runway Length - 257.5” • Width - 153.5” / Length - 312.75”
BendPak HDS-27X Extended Length
BendPak HDS-40 Standard Length
BendPak HDS-40X Extended Length
#5175164
SHOW PRICE
22,815
$
24,795
$
• Lifting Capacity - 27,000 lbs. • Max. Rise - 61.25” / Runway Length - 317.5” • Width - 153.5” / Length - 372.75”
14
#5175176
SHOW PRICE
28,885
$
#5175178
SHOW PRICE
31,830
$
31,395
$
34,595
$
• Lifting Capacity - 40,000 lbs. • Max. Rise - 61.25” / Runway Length - 244.5” • Width - 153.5” / Length - 313.75”
• Lifting Capacity - 40,000 lbs. • Max. Rise - 61.25” / Runway Length - 304.5” • Width - 153.5” / Length - 373.5”
Prices Valid October 31st - November 10th, 2023
Lift Accessories
2-POST ACCESSORIES: Tall Adapter Pins (60 mm) (Set of 4) #5215759
SHOW PRICE
170
$
Frame Cradle Pads (60 mm) (Set of 4)
SHOW PRICE
#5215761
210
$
226
$
184
• Height - 5.5” $ • Fits BendPak 2-Post Lifts
WSA-100 Air-Electric Workstation #5210438
SHOW PRICE
335
$
362
$
• Sturdy Steel Construction • Tactile Rubber Mat Reduces Slippage
Airline Kit
4-POST ACCESSORIES:
HD-9 / HD-14 Series #5174009
HD-18E / 27X / 35X / 40X Series
SHOW PRICE
105
$
112
$
#5174011
SHOW PRICE
105 112
$
Plastic Drip Trays (Set of 2)
$
SHOW PRICE
#5700301
• Fits Any BendPak 4-Post Lift • Height - 3” • Length - 37” / Width - 44”
125
$
134
SHOW PRICE
105
$
HD-18 / 27 / 35 Series #5174010
• Fits BendPak 2-Post & 4-Post Lifts • Nickel-Plated Ball Valve Shutoff • Four 110V GFI Outlets
114
$
• Allows Bridge Jack Pneumatic Airlines to be Hidden Beneath Lift Runways • High Quality Mounts
DP-30 15 Gal. Rolling Oil Drain Pan #5150509
SHOW PRICE
485
$
$
Portable Wheel Kit (Set of 4) SHOW PRICE #5210997
575
$
525
$
625
$
• Built-In Drain Nozzle • Grooved Telescoping Rollers • Removable Steel Mesh Cover
• Fits HD-7 Series & HD-9 Series Lifts • Easily Installed / Uninstalled • Cotter Pin Design
Alum. Ramps Standard (Pair) #5174497
STARTING AT
650 $600
$
Alum. Ramps Extended (Pair) #5174705
STARTING AT
700 $645
$
Steel Ramps (Pair) #5210055
STARTING AT
725 $670
$
CALL TO CHECK COMPATIBILITY
1-800-253-2363 • bendpak.com/SEMA
Aluminum Deck (Pair) #5210207
STARTING AT
1,800 $1,660
$
15
2-Post Lifts
Scissor Lifts
See pg. 4
See pg. 22
Portable Lifts
Air Coolers
See pg. 24
See pg. 48
Tire Changers
Parking Lifts
See pg. 34
See pg. 26
4-Post Lifts
Shop Equipment
See pg. 12
16
See pg. 43
Free shipping on most BendPak products to the 48 contiguous states.
Rechargable Work Light
LiteStix LS36SMD Rechargeable Work Light #5150029
The LITESTIX™ LS36SMD is a versatile LED rechargeable portable work light with 36 super-bright LED bulbs that provide brilliant lighting coverage anywhere you need it. Includes a large 1,800 mAh lithium-ion battery that provides up to 4.5 hours of continuous use, hi and low settings, impact resistant polycarbonate housing, detachable telescoping grip that expands from 49.5” to 79.75”, two swivel magnets for quick mounting to work benches, tool boxes or car lift components, and durable stowable hooks for hanging or mounting.
NEW!
SEE PAGE 46 FOR PRICING
1-800-253-2363 • bendpak.com/SEMA
17
Alignment Lifts BendPak HD-9AE Alignment Lift
SHOW PRICE
7,540
$
#5175820
BendPak HDS-14LSX Extended Length #5175171
8,195
SHOW PRICE
10,025
$
10,895
$
$
INCLUDES PLATES AND GALVANIZED FRONT TURN PLATES
• Max. 2 Wheel Align. - 160” / Max. Rise - 70” • Capacity - 9,000 lbs. / Runway Length - 188” • Width - 127” / Length - 224”
BendPak HDS-14LSXE Limo Extended Length
• Max. 2 Wheel Align. - 182” / Max. Rise - 70.75” • Capacity - 14,000 lbs. / Runway Length - 199” • Width - 130” / Length - 242”
SHOW PRICE
10,485
$
#5175172
INCLUDES PLATES AND GALVANIZED FRONT TURN PLATES
BendPak HDSO-14AX Open Front #5175153
11,395
12,325
$
13,395
$
$
INCLUDES PLATES AND GALVANIZED FRONT TURN PLATES
#5175969
SHOW PRICE
21,800
$
INCLUDES PLATES AND GALVANIZED FRONT TURN PLATES
• Max. 2 Wheel Align. - 182” / Max. Rise - 70.75” • Capacity - 14,000 lbs. / Runway Length - 199” • Width - 143.25” / Length - 244.5”
• Max. 2 Wheel Align. - 212” / Max. Rise - 70.75” • Capacity - 14,000 lbs. / Runway Length - 229” • Width - 130” / Length - 272”
BendPak HDS-18EA Truck Alignment
23,695
$
HEAVY-DUTY
• Max. 2 Wheel Align. - 211” • Max. Rise - 59” • Capacity - 18,000 lbs. • Runway Length - 257.5” • Width - 153.5” • Length - 312.75”
18
SHOW PRICE
Prices Valid October 31st - November 10th, 2023
INCLUDES PLATES AND GALVANIZED FRONT TURN PLATES
Alignment Packages PACKAGE DEAL 1 #5175898
INCLUDES: SHOW PRICE • HD-14LSX 4-Post Lift $ • (1) Airline Kit • (2) RJ7W Rolling Jacks $14,495
13,340
• Capacity - 14,000 lbs. • Max. Rise - 70.75" • Width - 130" • Length - 242"
BUNDLE AND SAVE! PACKAGE DEAL 2 #5175899
SHOW PRICE
13,705
$
INCLUDES: • HD-14LSXE 4-Post Lift $14,895 • (1) Airline Kit • (2) RJ7W Rolling Jacks • Capacity - 14,000 lbs. • Max. Rise - 70.75" • Width - 130" • Length - 272"
PACKAGE DEAL 3 #5175901
15,360
$
16,695
$
OP
SELLER
TOP
LE
R
• Capacity - 14,000 lbs. • Max. Rise - 70.75" • Width - 143.25" • Length - 244.5"
SHOW PRICE
T
INCLUDES: • HDSO-14AX 4-Post Lift • (1) Airline Kit • (2) RJ7W Rolling Jacks
SEL
BUNDLE AND SAVE! 1-800-253-2363 • bendpak.com/SEMA
19
Rolling Bridge Jacks BendPak RJ45LP Low Profile Rolling Jack #5175579
SHOW PRICE
1,820
$
1,975
$
• Lifting Capacity - 4,500 lbs. • Arm Reach - 42”- 61” • Frame Reach - 35.5”- 46.5”
BendPak RJ7W Rolling Jack #5175249
SHOW PRICE
1,840
$
2,000
• Lifting Capacity - 7,000 lbs. $ • Arm Reach - 42”- 56” • Frame Reach - 36.25”- 46.5”
BendPak RJ45W Rolling Jack
SHOW PRICE
1,820
$
#5175247
• Lifting Capacity - 4,500 lbs. • Arm Reach - 42”- 57” • Frame Reach - 35.5”- 46.5”
BendPak RJ9W Rolling Jack
1,975
$
SHOW PRICE
3,220
$
#5175252
• Lifting Capacity - 9,000 lbs. • Arm Reach - 42”- 56” • Frame Reach - 45”- 50”
3,495
BendPak RJ6W Rolling Jack #5175248
SHOW PRICE
1,820
$
1,975
$
• Lifting Capacity - 6,000 lbs. • Arm Reach - 42”- 56” • Frame Reach - 36.25”- 47.25”
BendPak RBJ15000 Rolling Jack #5175031
SHOW PRICE
4,230
$
4,595
$
$
• Lifting Capacity - 15,000 lbs. • Arm Reach - 48.5 ”- 63.75” • Frame Reach - 45.75”- 59”
INCLUDES: 8-Piece Adapter Set
BendPak RBJ18000 Rolling Jack #5175032
SHOW PRICE
4,600
$
4,995
$
• Lifting Capacity - 18,000 lbs. • Arm Reach - 48.5”- 63.75” • Frame Reach - 45”
#5175349
#5175033
SHOW PRICE
4,690
$
BendPak JP45 Telescoping Jack Tray #5215825
5,095
$
• Lifting Capacity - 25,000 lbs. • Arm Reach - 48.5”- 63.75” • Frame Reach - 45”
INCLUDES: 8-Piece Adapter Set
BendPak JP-6 Telescoping Sliding Jack Tray
BendPak RBJ25000 Rolling Jack
SHOW PRICE
455
$
• Capacity - 4,500 lbs. • Overall Height - 3.5” • Overall Width - 35.75” - 44”
INCLUDES: 8-Piece Adapter Set
RJ45W
SHOW PRICE
410
$
• Capacity - 6,000 lbs. • Overall Height - 6” • Overall Width - 35” - 49”
442
$
(Jacks NOT Included)
20
490
$
Free shipping on most BendPak products to the 48 contiguous states.
Portable Column Lift BendPak PCL-18B (Set of 2) Portable Column
BendPak PCL-18B (Set of 4) Portable Column
#5175291
#5175292
40,195
$
SHOW PRICE
18,950
$
SHOW PRICE
36,980
$
• Column Capacity - 18,000 lbs. • System Capacity - 72,000 lbs. • Lifting Height - 71.5”
20,595
$
• Column Capacity - 18,000 lbs. • System Capacity - 36,000 lbs. • Lifting Height - 71.5”
BendPak PCL-18B (Set of 6) Portable Column #5175293
SHOW PRICE
55,015
$
BendPak PCL-18B (Set of 8) Portable Column #5175294
59,795
$
OP
79,295
$ • Column Capacity - 18,000 lbs. • System Capacity - 144,000 lbs. • Lifting Height - 71.5”
SELLER
TOP
LE
R
T
• Column Capacity - 18,000 lbs. • System Capacity - 108,000 lbs. • Lifting Height - 71.5”
SHOW PRICE
72,955
$
SEL
1-800-253-2363 • bendpak.com/SEMA
21
Low-Rise / Mid-Rise / Full-Rise BendPak LR-60 Low-Rise Lift #5175729
SHOW PRICE
2,280
$
BendPak LR-60P Low-Rise Portable Lift #5175728
2,475
SHOW PRICE
2,390
$
2,595
$
$
• Lifting Capacity - 6,000 lbs. • Lift Pad Dimensions - 18” x 52” • Height Range - 3.5”- 25”
• Lifting Capacity - 6,000 lbs. • Lift Pad Dimensions - 18” x 52” • Height Range - 3.5”- 25”
BendPak MDS-6LP Mid-Rise Scissor Lift
BendPak MDS-6LPF Mid-Rise Scissor Flush Mount
#5175226
SHOW PRICE
5,700 6,195
$
2,895
$
Comes standard with adapter set • Lifting Capacity - 6,000 lbs. • Adjustable Arms • Height Range - 4.75”- 47”
SHOW PRICE
5,610
$
#5175227
6,095
$
Comes standard with rubber lift blocks
Comes standard with rubber lift blocks • Lifting Capacity - 6,000 lbs. • Lift Pad Dimensions - 19” x 67” • Height Range - 5”- 44”
• Lifting Capacity - 6,000 lbs. • Lift Pad Dimensions - 19” x 67” • Height Range - 5”- 44”
BendPak P9000LT Low-Rise Pit Lift
BendPak P9000LTF Low-Rise Pit Lift Flush Mount
#5175133
#5175730
SHOW PRICE
2,665
$
Comes standard with rubber lift blocks
Comes standard with rubber lift blocks
$
BendPak MD-6XP Mid-Rise Portable Lift
SHOW PRICE
5,240
$
5,695
$
#5175155
SHOW PRICE
5,150
$
5,595
MDS-6LPF BendPak Optional P-9000 Series Telescoping Arm Kit #5210194
$
SHOW PRICE
760
$
825
$
Comes standard with rubber lift blocks • Lifting Capacity - 9,000 lbs. • Lift Pad Dimensions - 24” x 58.5” • Height Range - 4”- 24”
22
Comes standard with rubber lift blocks • Lifting Capacity - 9,000 lbs. • Lift Pad Dimensions - 24” x 58.5” • Height Range - 4”- 24”
• Capacity / Each arm - 2,250 lbs. • (4) Lift Arms • (4) Contact pads
Prices Valid October 31st - November 10th, 2023
Variability in Specifications and Features: All product specifications and features listed in this catalog are for reference only. For a more accurate and comprehensive listing of product specifications and features, visit www.bendpak.com. The contents of this catalog are subject to change.
BendPak LR10000 Low-Rise Lift
SHOW PRICE
4,140
$
#5175232
4,495
$
BendPak SP-7XE Full-Rise Scissor Lift
• Lifting Capacity - 10,000 lbs. • Lift Pad Dimensions - 24”x 53” • Height Range - 4.5”- 23”
BendPak EV3000SL Portable EV Battery Lift
9,495
$
BendPak SP-7XEF Full-Rise Flush Mount Scissor Lift
• Capacity - 7,000 lbs. • Lift Pad Dimensions - 22” x 62.5” • Height Range - 6.5”- 70.5”
• Capacity - 7,000 lbs. • Lift Pad Dimensions - 22” x 62.5” • Height Range - 6.5”- 70.5”
SKU 5175613
9,295
$
9,095
$
Comes standard with rubber lift blocks
BendPak EV4500SL Portable EV Battery Lift
SHOW PRICE
SHOW PRICE
8,370
$
#5175425
Comes standard with rubber lift blocks
8,555
$
SKU 5175611
8,740
$
#5175424
Comes standard with 8-pc. adapter set
SHOW PRICE
SHOW PRICE
9,290
$
10,095
$
Mobi-EVS • Platform Capacity - 3,000 lbs. • Max. Platform Height - 75.75" • Platform Size - 40" x 60"
BendPak Mobi-EVS Universal Deck Mount Kit SKU 5216234
BendPak Mobi-EVS Fixture Kit w/Adapters SKU 5210458
SHOW PRICE
180
$
194
$
SHOW PRICE
435
$
472
$
• Platform Capacity - 4,500 lbs. • Max. Platform Height - 75.75" • Platform Size - 40" x 60"
BendPak Mobi-EVS Transmission Support
SHOW PRICE
190
$
202
$
SKU 532189
BendPak Mobi-EVS Telesc. Arm Kit SKU 5210454
BendPak Mobi-EVS Multi-Point Support Kit SKU 5216205
SHOW PRICE
440
$
474
$
SHOW PRICE
715
$
775
$
1-800-253-2363 • bendpak.com/SEMA
23
Portable Lifts QuickJack 3500SLX 3,500-lb. Capacity Portable Car Lift
QuickJack 5000TL 5,000-lb Capacity Portable Car Lift
SHOW PRICE
1,300
$
#5175010
#5175630
1,525
SHOW PRICE
1,405
$
1,650
$
$
• Lifting Height - 3” - 24” • Frame Width - 11” • Frame Length - 70”
• Lifting Height - 3” - 21” • Frame Width - 10.5” • Frame Length - 62.5”
QuickJack 5000TLX 5,000-lb. Capcity Portable Car Lift
QuickJack 6000ELX 6,000-lb. Capacity Portable Car Lift
SHOW PRICE
1,445
$
#5175635
#5175650
SHOW PRICE
1,680
$
1,975
1,700
$
$
• Lifting Height - 3” - 24” • Frame Width - 11” • Frame Length - 76”
QuickJack 7000TL 7,000-lb. Capacity Portable Car Lift
QuickJack 7000TLX 7,000-lb. Capacity Portable Car Lift
SHOW PRICE
1,530
$
#5175640
• Lifting Height - 3.5” - 24.5” • Frame Width - 12.5” • Frame Length - 86.75”
#5175645
1,800
$
• Lifting Height - 3.5” - 24.5” • Frame Width - 12.5” • Frame Length - 70.75”
ACCESSORIES: #5210199
ONLY
56 $50
$
24
Truck Adapter Kit
ONLY
206 $180
#5150561
$
1,555
$
1,825
$
Wall Hanger Set
SHOW PRICE
• Lifting Height - 3.5” - 24.5” • Frame Width - 12.5” • Frame Length - 76”
Frame Extensions #5620291
350
$
ONLY
300
$
ATV Lift Kit #5150006
Free shipping on most BendPak products to the 48 contiguous states.
ONLY
915
$
1,075
$
Portable 2-Post Lifts STANDARD PACKAGE MaxJax M7K Portable Two-Post Lift #5175548
SHOW PRICE
3,585
$
3,895
$
PACKAGE INCLUDES: • M7K Portable Lift • All Standard Accessories
DELUXE PACKAGE MaxJax M7K Portable Two-Post Lift #5175566
PACKAGE INCLUDES: • M7K Portable Car Lift • Upright Oil Drain • Rolling Work Seat
BUNDLE AND
SHOW PRICE
3,685
$
3,995
$
SAVE!
• Lifting Capacity - 7,000 lbs. • Max. Lifting Height - 48” • Min. Height - 4.5” • Lock Positions - 7 • Overall Height - 89.5”
3,860
$
#5175569
4,195
$
PACKAGE INCLUDES: • Rolling Work Seat • M6K Portable Car Lift • Upright Oil Drain • 5" Tall Adapter Pins • Frame Cradle Pads
ULTIMATE PACKAGE MaxJax M7K Portable Two-Post Lift
4,045
$
#5175572
PACKAGE INCLUDES: • Adjustable Creeper • M6K Portable Car Lift • Upright Oil Drain • 5" Tall Adapter Pins • Frame Cradle Pads
SHOW PRICE
4,395
$
OP
SELLER
TOP
MaxJax M7K Motorcylce & ATV Adapter #5215917
LE
R
MaxJax M7K Portable Two-Post Lift
SHOW PRICE
T
SUPREME PACKAGE
SEL
SHOW PRICE
115
$
120
$
• Lifting Capacity - 1,500 lbs. • Non-Slip Polyurethane Rubber Pads • Sturdy Stainless Steal Construction
1-800-253-2363 • bendpak.com/SEMA
25
Parking & Storage Lifts Autostacker A6S Scissors Parking Lift #5175274
SHOW PRICE
9,480
$
10,895
$
Autostacker A6W Extra Wide Scissors Parking Lift
SHOW PRICE
9,830
$
#5175282
11,295
$
GALVANIZED OPTION AVAILABLE Autostacker A6S-G #5175276
SHOW PRICE
11,135
$
12,795
$
Autostacker A6W-G #5175283
SHOW PRICE
11,480
$
13,195
$
• Capacity - 6,000 lbs. • Lifting Height (Top Lock) - 81.25” • Overall Width - 103” / Length - 143”
• Capacity - 6,000 lbs. • Lifting Height (Top Lock) - 81.25” • Overall Width - 111” / Length - 144”
BendPak HD-973P Tri-Level Parking Lift
BendPak HD-973PX Tri-Level Parking Lift Extended
#5175238
SHOW PRICE
18,490
$
20,095
$
#5175267
SHOW PRICE
19,135
$
20,795
$
GALVANIZED OPTION AVAILABLE BendPak HD-973-G #5175266
SHOW PRICE
23,000
$
24,995
$
BendPak HD-973PX-G #5175268
SHOW PRICE
24,195
$
26,295
$ • Capacity - 7K lbs. Top Deck / 9K lbs. Bot. Deck • Runway (L) - 188.5” • Overall Height - 161” • Width - 112” • Length - 242”
BendPak PL-6000DC Two-Post Parking Lift #5175427
SHOW PRICE
HD-973P
6,345
$
6,895
$
• Lifting Capacity - 6,000 lbs. • Lifting Height - 82.5” • Overall Height - 126.5” • Width - 100.25” • Length - 148.25”
26
• Capacity - 7K lbs. Top Deck / 9K lbs. Bot. Deck • Runway (L) - 199” • Overall Height - 173” • Width - 112” • Length - 252.25”
GALVANIZED OPTION AVAILABLE
Prices Valid October 31st - November 10th, 2023
Multi-Platform Parking Lifts BendPak SHOW PRICE PL-12000DP Parking Lift $ #5175547
17,480 18,995
$
SAVE
NEW!
BIG! • Lifting Capacity / Deck - 6,000 lbs. • Overall Width - 221.5” • Overall Length - 242.5” • Platform Width - 85” • Length of Platforms - 183” • Drive Clearance - 80.5” • Max. Rise - 82”
BendPak SHOW PRICE PL-6KT Triple Deck $ Parking Lift #5175154
31,645 34,395
$
• Lifting Capacity / Deck - 6,000 lbs. • Overall Width - 308” • Overall Length - 236.5” • Platform Width - 82” • Length of Platforms - 152” • Drive Clearance - 93” • Max. Rise - 89”
PL-6KT
1-800-253-2363 • bendpak.com/SEMA
27
Pipe Benders BendPak BB-2-DLX-601
BendPak 1302BAS-DLX-601
#5115150
#5115180
SHOW PRICE
8,740
$
SAVE
BIG!
9,495
$
• Bending Controls - Manual • Clampless Swager - Internal Expander • Deluxe 302 Tooling Package
BendPak 1302BA-DLX-601
SHOW PRICE
9,380
$
10,195
$
• Bending Controls - Semi-Automatic • Clampless Swager - Internal Expander • Deluxe 302 Tooling Package
BendPak BB-2-MET-503
#5115121
#5115120
SHOW PRICE
9,200
$
10,025
$
SHOW PRICE
9,995
$
10,895
$
BendPak BB-2-MET-601 #5115122
SHOW PRICE
9,200
• Bending Controls - Digital Automatic • Clampless Swager - Internal Expander • Deluxe 302 Tooling Package
$
BendPak 1302BAS-MET-503
BendPak 1302BA-MET-503
#5115123
9,995
$
#5115126
SHOW PRICE
9,840
$
10,695
11,395
$
BendPak 1302BA-MET-601
BendPak 1302BAS-MET-601
#5115127
#5115124
SHOW PRICE
9,840 10,695
• Bending Controls - Semi-Automatic • Clampless Swager - Internal Expander • Deluxe Metric Tooling Package
$
BendPak 300-1 Die Package #5105570
SHOW PRICE
10,485
$
$
$
• Bending Controls - Manual • Clampless Swager - Internal Expander • Deluxe Metric Tooling Package
SHOW PRICE
10,485
$
• Bending Controls - Digital Automatic • Clampless Swager - Internal Expander • Deluxe Metric Tooling Package
11,395
$
SHOW PRICE
1,175
$
1,275
$
• 6-Piece Set • Bends 3" OD Tubing
28
Free shipping on most BendPak products to the 48 contiguous states.
Air Compressors BendPak TSP-580V-601
BendPak VMP-7580V-601
#5179111
#5179112
SHOW PRICE
3,125
$
3,395
SHOW PRICE
3,680
$
3,995
$
$
5 HP MODEL • Voltage - 208-230 V / 60 Hz / 1 Ph • Horsepower - 5 Hp • Maximum CFM - 17 / 175 psi • Tank - 300L / 80 Gal / Vertical
• Voltage - 208-230 V / 60 Hz / 1 Ph • Maximum CFM - 26 / 175 psi • Tank - 300L / 80 Gal / Vertical
7.5 HP MODEL BendPak VMP-7580V-603 #5179113
SAVE
BIG! BendPak VMP-10120V-603 #5179114
4,195
$
• Voltage - 208-230 V / 60 Hz / 3 Ph • Maximum CFM - 26 / 175 psi • Tank - 300L / 80 Gal / Vertical
BendPak Anti-Vibration Pads (Set of 4) #5179402
SHOW PRICE
4,600
$
SHOW PRICE
3,860
$
ONLY
60
$
4,995
$
ANSI
10 HP MODEL
Extreme-duty four-cylinder cast iron pump
Protective pulley cover
OP
SELLER
TOP
LE
R
T
• Voltage - 208-230 V / 60 Hz / 3 Ph • Horsepower - 10 Hp • Maximum CFM - 35 / 175 psi • Tank - 454L / 120 Gal / Vertical
SEL
Air cooling assembly
Electric motor with cooling fan
1-800-253-2363 • bendpak.com/SEMA
29
Power Units Ranger E1.2B3F1 Power Unit
NEED PARTS? WE HAVE THEM TOO. CALL US TOLL FREE 1- 800 -253 -2363
#5585435
SHOW PRICE
$
460 496
$
• Gal Reservoir - 1.6 / PRV - 2500 • Motor - 1.5 HP / 220V - 60 Hz -1PH • CE Listed
Ranger E2.1F3H1 Power Unit #5585285
SHOW PRICE
575
$
625
$
• Gal Reservoir - 3.6 / PRV - 2650 • Motor - 2.5 HP / 208-230V-50/60 Hz-1PH • UL/ETL Listed
Ranger F2.1F3H1 Power Unit #5585280
SHOW PRICE
575
$
625
$
• Gal Reservoir - 3.6 / PRV - 2850 • Motor - 2.5 HP / 208-230V-60 Hz-1PH • UL/ETL Listed
30
Prices Valid October 31st - November 10th, 2023
Portable Power Packs JackPak Ultra2500A 4-IN-1 Portable Power Pack #5180050
FREE
GPS Asset Tracker Included
SHOW PRICE
184
48
$
216
56
$
$
• Battery Capacity - 20,000mAh (76Wh) • Starting Voltage - 12V • Pressure Range - 10 - 150 psi • 5V USB Outlet
#5180441
• Battery Capacity - 20,000mAh • Input/Output Voltage - 5V DC at 2A • Battery Type - Lithium Ion • Charge Cycles - 500
FREE
GPS Asset Tracker Included
SHOW PRICE
532
227
625
266
$
• AC Output Rated Voltage - 100~120Vac • Ac Output Peak Power - 1000W • Input Voltage - 100W Max. • Net Weight - 15lbs.
SHOW PRICE
227
$
266
$
• DC Output - 18V/100W • Peak Power - 100 Watts • Solar Cell Efficiency - ≈ 20 to 22% • IP Rating - IP65
#5180439
FREE
GPS Asset Tracker Included
$
$
#5180453
JackPak PB960 Portable Power Bank
SHOW PRICE
$
JackPak SP100W Portable Solar Panel Charger
#5180428
SHOW PRICE
$
JackPak PS600W Portable Power Station
JackPak PB20KS Pocket Sized Solar Power Pack
• Battery Capacity - 3.2V/9600mAh/307.2Wh • Battery Type - Lithium Polymer • Wireless Charging - 10W Max. • DC Input - 18-24V/4A
FREE
GPS Asset Tracker Included
JackPak RL400 Portable Power Bank #5180417
FREE
GPS Asset Tracker Included
SHOW PRICE
51
$
60
$
• Frequency FM - 87 - 108 MHz • Frequency AM - 520 - 1710 kHz • Battery - 3.7V 4,000mAh • IP Rating - IPX3
1-800-253-2363 • bendpak.com/SEMA
31
Tire Changers Ranger R745 Swing-Arm Tire Changer
Ranger R76LT Tilt-Back Tire Changer
Ranger R980XR Swing-Arm Tire Changer
#5140148
#5140144
#5140146
SHOW PRICE
2,185
$
SHOW PRICE
3,530
$
2,370
$
3,465
$
3,765
3,835
$
$
NOTE: Jet blast bead seater NOT INCLUDED
SHOW PRICE
VOLTAGE 110VAC OR 220VAC • Internal Clamping - 12”- 20” • External Clamping - 10”- 16” • Max. Tire Diameter - 36”
Ranger R980AT Swing-Arm Power Assist
Ranger R76ATR Tilt-Back Power Assist
#5140147
#5140140
SHOW PRICE
5,215
$
• Internal Clamping - 10”- 30” • External Clamping - 8”- 26” • Max. Tire Diameter - 50”
• Internal Clamping - 10”- 30” • External Clamping - 8”- 26” • Max. Tire Diameter - 43”
SHOW PRICE
5,415
$
5,885
5,665
$
$
• Internal Clamping - 10”- 30” • External Clamping - 8”- 26” • Max. Tire Diameter - 50”
• Internal Clamping - 10”- 30” • External Clamping - 8”- 26” • Max. Tire Diameter - 43”
Ranger R80EX Dual-Assist Tilt-Back Tire Changer
Ranger R26FLT Super-Duty Truck Tire Changer
NEW!
#5140137
#5140139
SHOW PRICE
7,730
$
8,400
$
• Internal Clamping - 13”- 34” • External Clamping - 10”- 30” • Maximum Tire Diameter - 47”
32
HEAVY-DUTY
SHOW PRICE
8,785
$
9,545
$
• Drive System - Electric / Hydraulic • Maximum Rim Diameter - 14”- 26” • Maximum Tire Diameter - 63”
Free shipping on most BendPak products to the 48 contiguous states.
Package Deals PACKAGE DEAL 1 #5140136
Package Includes: • R980XR Tire Changer • DST2420 Wheel Balancer • Wheel Weight Roll
PACKAGE DEAL 2 #5140129
Package Includes: • R980XR Tire Changer • DST30P Wheel Balancer • Wheel Weight Roll
PACKAGE DEAL 3 #5140128
SHOW PRICE
5,730
$
6,225
$
SHOW PRICE
PACKAGE DEAL 1 BUNDLE AND
SAVE!
5,995
$
6,515
$
SHOW PRICE
7,015
$
Package Includes: • R980XR Tire Changer • LS43B Wheel Balancer • Wheel Weight Roll
7,625
$
PACKAGE DEAL 4
PACKAGE DEAL 4
#5140127
Includes: • R980AT Tire Changer • DST30P Wheel Balancer • Wheel Weight Roll
7.655
$
8,320
$
PACKAGE DEAL 5 #5140126
Includes: • R980AT Tire Changer • LS43B Wheel Balancer • Wheel Weight Roll
PACKAGE DEAL 6 #5140124
Includes: • R76ATR Tire Changer • DST30P Wheel Balancer • Wheel Weight Roll
7,855
$
Includes: • R76ATR Tire Changer • LS43B Wheel Balancer • Wheel Weight Roll
SHOW PRICE
8,685
$
9,435
$
PACKAGE DEAL 6
8,535
$
PACKAGE DEAL 7 #5140123
SHOW PRICE
SHOW PRICE
SHOW PRICE
8,875
$
9,645
$
1-800-253-2363 • bendpak.com/SEMA
33
Wheel Balancers Ranger DST-2420 Wheel Balancer
SHOW PRICE
2,375
$
#5140156
Ranger DST30P Wheel Balancer
2,580
2,885
$
$
DUAL VOLTAGE 110V / 220V
DUAL VOLTAGE 110V / 220V
• Max. Wheel Diameter - 10”- 30” • Max. Tire Diameter - 47” • Max. Tire Weight - 145 lbs.
Ranger LS43B Wheel Balancer 3D Quick-Touch™ Laser-Spot™ #5140151
SHOW PRICE
3,735
$
4,055
$
SHOW PRICE
2,655
$
#5140154
• Max. Wheel Diameter - 8” - 30” • Max. Tire Diameter - 50” • Max. Tire Weight - 150 lbs.
FREE wheel weight starter kit included with all balancers
VOLTAGE 220VAC • Max. Wheel Diameter - 10”- 30” • Max. Tire Diameter - 47” • Max. Tire Weight - 145 lbs. Laser-Spot™ Technology
Ranger RB24T Truck Wheel Balancer
HEAVY-DUTY
#5140149
SHOW PRICE
8,330
$
9,050
$
VOLTAGE 380VAC
Complete with Deluxe Adapter Kit and Quick-Chuck
• Max. Wheel Diameter - 30” • Max. Tire Diameter - 50” • Max. Tire Weight - 400 lbs.
34
Prices Valid October 31st - November 10th, 2023
Wheel Service Accessories Ranger Plastic Tool Head #5150523
SHOW PRICE
50
$
Ranger Mounting Flange #5150524
SHOW PRICE
55
Ranger Wheel Protection Kit #5150535
$
STARTING AT
80
$
85
$
• Helps Protect Expensive Alloy Wheels • Must Have Duck Head Flange Adapter (Sold Separately)
• Hardened Steel • Requires and is Used with Plastic Mounting Head (Sold Separately)
Includes: • 3 Roller Inserts, 3 Under Inserts, 4 Clamp Covers, 2 Blade Covers
Ranger Motorcycle Shaft Kit
Ranger Truck Cone Kit
Ranger ATV Changer Clamps Kit (Set of 4)
#5150320
SHOW PRICE
375
$
405
$
#5150032
SHOW PRICE
430
$
465
$
#5328425
SHOW PRICE
505
$
545
$
• Fits DST-2420 and DST-64T • Includes: Universal Wheel Clamp, Shaft, Centering Cones, Spacers and Spin-On Nut
• Double-Sided Centering Cone Fits Hub Sizes 4.75" – 6.75" • Features Superior Centering and Fitment Coverage
Ranger Lug Bolt Kit
REPLACEMENT PARTS AVAILABLE CALL US TOLL FREE 1- 800 -253 -2363
#5150020
SHOW PRICE
1,055
$
1,145
$
• Includes: Four Clamp Adapters, ATV Mount/Demount Head • Increases External Wheel Clamping 4”
• 8-pc. Kit • Includes: Centering Pin Adapters, Flange Plate Kit and Measuring Caliper
1-800-253-2363 • bendpak.com/SEMA
35
Diagnostics TruSensor TS58R Universal TPMS Tool Kit #5150035
SHOW PRICE
NEW!
245
$
265
$
• 98% Global Vehicle Coverage • Support 315 MHz / 433 MHz • Read and Clear TPMS DTC's • Multi-Language Functionality • Includes 4 Metal / 4 Rubber Sensors
TruSensor TSS12B RUBBER TPMS Sensors (12 pcs) #5326310
SHOW PRICE
200 215
#5326311
SHOW PRICE
395
$
$
TruSensor TSS24B RUBBER TPMS Sensors (24 pcs)
$
NEW!
425
$
• Snap-In Stem • Black / Rubber Body • 315 MHz / 433 MHz • 98% Global Vehicle Coverage
TruSensor TSS12M METAL TPMS Sensors (12 pcs) #5326316
SHOW PRICE
200
$
215
$
TruSensor TSS24M METAL TPMS Sensors (24 pcs) #5326317
SHOW PRICE
NEW!
395
$
425
$
• Clamp-In Stem • Silver / Metal Body • 315 MHz / 433 MHz • 98% Global Vehicle Coverage
Adjustable Angle Valve Stem Fits a Wide Variety of Wheels 15° to 40°
TSS1M Only*
36
Free shipping on most BendPak products to the 48 contiguous states.
Diagnostics Bundles TPMS BUNDLE 1 #5150100
x24
SHOW PRICE
620
$
670
$
INCLUDES: • TPMS Tool Kit • TSS24B RUBBER 24-pc. Sensor Pack
BUNDLE AND SAVE!
TPMS BUNDLE 2 #5150101
SHOW PRICE
x24
620
$
670
$
INCLUDES: • TPMS Tool Kit • TSS24M METAL 24-pc. Sensor Pack
TPMS BUNDLE 3 #5150102
SHOW PRICE
1,000
x24
$
1,085
$
INCLUDES: • TPMS Tool Kit • TSS24B RUBBER 24-pc. Sensor Pack • TSS24M METAL 24-pc. Sensor Pack
x24
1-800-253-2363 • bendpak.com/SEMA
37
Brake Lathes Ranger RL-8500 Combination Brake Lathe Package
Ranger SHOW PRICE RL-8500XLT Combination $ Brake Lathe Package $ Super-Duty
SHOW PRICE
7,890
$
#5150066
8,980
8,575
$
#5150080
• Max. Rotor Thickness - 2.5” • Max. Rotor Diameter - 17” • Max. Drum Diameter - 28”
Ranger Light & Medium Truck Adapter Set #5150171
9,760
• Max. Rotor Thickness - 2.5” • Max. Rotor Diameter - 17” • Max. Drum Diameter - 28” Fully equipped tool package comes standard
Fully equipped tool package comes standard
UT Y HEAV Y-D UDED L C IN H C BEN
UT Y HEAV Y-D UDED L C IN H C BEN
SHOW PRICE
380
$
Ranger Brake Lathe Truck Adapter Kit #5150161
410
38
2,245 2,435
$
A) Small Truck Cone - 4.125” x 5.25” B) Large Truck Cone - 5.125” x 6.25” C) Truck Plate - 7.40” OD
SHOW PRICE
$
$
• Fully Equipped Multi-Piece Set • Accommodates Medium & Full Size Trucks
Prices Valid October 31st - November 10th, 2023
Shop Equipment Ranger SHOW PRICE RS-500D Spray Wash $ Cabinet #5155117
6,160 6,695
Ranger RS-500DS Stainless Steel Spray Wash Cabinet #5155051
SHOW PRICE
8,585
$
9,330
$
$
FREE
FREE
20-lb. Soap Bucket With Any Ranger Spray Wash Cabinet
20-lb. Soap Bucket With Any Ranger Spray Wash Cabinet
• Load Capacity - 500 lbs. • Tank Capacity - 50 gal. • Interior Dimensions - 43” x 32”
• Load Capacity - 500 lbs. • Tank Capacity - 50 gal. • Interior Dimensions - 43” x 32”
Ranger SHOW PRICE RS-750D Spray Wash $ Cabinet (Truck)
Ranger RS-750DS Stainless Steel Spray Wash Cabinet
6,610
#5155118
#5155052
SHOW PRICE
9,230
$
10,030
$
7,180
$
FREE
FREE
20-lb. Soap Bucket With Any Ranger Spray Wash Cabinet
20-lb. Soap Bucket With Any Ranger Spray Wash Cabinet
• Load Capacity - 1,000 lbs. • Tank Capacity - 53 gal. • Interior Dimensions - 32” x 54”
Ranger Aluma-Klean Detergent 20 lbs. #5155096
#5155100
• Low pH • Water Soluble • Non Foaming Soap
ONLY
105
$
• Low pH • Water Soluble • Non Foaming Soap
Ranger Aluma-Klean Detergent 50 lbs.
• Load Capacity - 1,000 lbs. • Tank Capacity - 53 gal. • Interior Dimensions - 32” x 54”
110
$
#5150025
250
$
SHOW PRICE
4,085
$
4,435
$
ONLY
230
$
Ranger AC-134A A/C Recovery Machine
• Refrigerant: R134a • Car, Truck, SUV and Bus Compatibility • Tank Capacity - 50 lbs.
1-800-253-2363 • bendpak.com/SEMA
39
SHOP EQUIPMENT WORK MEETS
COMFORT
ROLLING CREEPER SEAT CONVERTS FROM HIGH TO LOW
UP TO
5
LOCKING HEIGHTS
The ergochairTM is the adjustable height rolling work seat which will make performing awkward work tasks ergonomically easier and safer. This comfortable creeper seat offers a full range of mobility, increased productivity, and reduced fatigue.
TRANSFORMS COMFORTABLY FROM CREEPER TO UPRIGHT SEAT ©2023 BendPak Inc. All rights reserved.
SEE IT IN ACTION
Creeper Chairs Ergochair Ergo-RS Creeper Chair #5215988
• Max. Capacity - 350 lbs. • Max. Seat Height - 21" / Min Height 5.7" • Collapsed Length - 56"
SHOW PRICE
555
$
600
$
Six Seat Locking Positions - 0° to 75°
Ergochair Ergo-JET Creeper Chair
Ergochair Ergo-SCOOT Creeper Chair
• Max. Capacity - 350 lbs. • Height Adjusts - 18" - 19" • Adjustable Reclining
• Max. Capacity - 350 lbs. • Height Upright - 48.75" • Height Lowered - 4.5"
SHOW PRICE
SHOW PRICE
#5215112
#5215118
875
$
950
$
1-800-253-2363 • bendpak.com/SEMA
670
$
725
$
41
Jacks & Lifting Ranger RFJ-3000AL 1.5 Ton Aluminum Racing Floor Jack SHOW PRICE
Ranger RFJ-3000LPF 1.5 Ton Super-Long SHOW PRICE Floor Jack
Ranger RFJ-4000AL 2 Ton Aluminum Racing Floor Jack
#5150061
#5150060
#5150085
305
$
395
$
330
Ranger SHOW PRICE RFJ-5000HD 2.5 Ton Heavy-Duty $ Commercial Grade Floor Jack $
300
#5150056
325
#5150414
$
SHOW PRICE
340
$
365
$
370
$
• Capacity - 3,000 lbs. • Height - 2.75”- 24” • Chassis Length - 34”
Ranger RFJ-3TQP 3 Ton Quick-Pump Floor Jack
• Capacity - 4,000 lbs. • Height - 3.5”- 17.75” • Chassis Length - 24”
Ranger RFJ-3TP 3 Ton Professional Floor Jack
SHOW PRICE
270
$
289
$
#5150418
Ranger RFJ-6HD 3 Ton “Low Rider” Floor Jack
270
$
293
$
• Capacity - 6,000 lbs. • Height - 5.25”- 19.25” • Chassis Length - 26”
SHOW PRICE
335
$
360
$
#5150446
• Capacity - 6,000 lbs. • Height - 4.75”- 20.5” • Chassis Length - 28”
SHOW PRICE
#5150440
• Capacity - 6,000 lbs. • Height - 5”- 19.75” • Chassis Length - 25.5”
• Capacity - 5,000 lbs. • Height - 3”- 20” • Chassis Length - 26”
Ranger RFJ-3T 3 Ton Racing Style Floor Jack Plunger-U-Joint
345
$
425
$
• Capacity - 3,000 lbs. • Height - 3.5”- 17.5” • Chassis Length - 24”
SHOW PRICE
• Capacity - 6,000 lbs. • Height - 3.625”- 21” • Chassis Length - 27”
RFJ-4000AL
HEAVY-DUTY
Ranger RFJ-10TL 10 Ton Long Frame Floor Jack #5150434
SHOW PRICE
1,125
$
1,220
$
• Capacity - 20,000 lbs. • Height - 7”- 23” • Chassis Length - 61”
42
Ranger RBJ-30TL 30 Ton Telescoping Air Bottle Jack #5150443
SHOW PRICE
1,205
$
1,305
$
• Capacity 1st Stage - 60,000 lbs. • Capacity 2nd Stage - 30,000 lbs. • Height - 6.5”- 12” / Chassis Length - 22.5”
Prices Valid October 31st - November 10th, 2023
Variability in Specifications and Features: All product specifications and features listed in this catalog are for reference only. For a more accurate and comprehensive listing of product specifications and features, visit www.bendpak.com. The contents of this catalog are subject to change.
Ranger RTJ-1100 1/2 Ton Transmission Jack
Ranger RTJ-1 1 Ton Transmission Jack
Ranger RTJ-3000 1.5 Ton Transmission Jack
#5150442
#5150404
#5150406
SHOW PRICE
SHOW PRICE
SHOW PRICE
855
$
810
$
490
$
925
$
880
$
530
$
• Capacity 1st Stage - 3,000 lbs. • Capacity 2nd Stage - 2,000 lbs. • Height - 35.5”- 71.5” • Base - 34” x 34”
• Capacity 1st Stage - 2,000 lbs. • Capacity 2nd Stage - 1,000 lbs. • Height - 37”- 73” • Base - 39” x 39”
• Capacity - 1,100 lbs. • Height - 45”- 72” • Base - 24” x 24”
Ranger RJS-1TF High Reach Jack Stand Foot Operated
Ranger RJS-1T High Reach Jack Stand #5150183
Ranger RJS-2TH Tripod Jack Stand #5150125
#5150185
SHOW PRICE
SHOW PRICE
SHOW PRICE
155
$
165
$
165
$
164
176
$
176
$
$
• Holding Capacity - 4,000 lbs. • Height - 55”- 87” • Base Dimensions - 24” x 24”
• Holding Capacity - 1,650 lbs. • Height - 54.5”- 80.5” • Base - 12” Diameter
Ranger RML-1500XL Extended Motorcycle Lift #5150605
SHOW PRICE
2,145
$
2,330
$
Ranger RJS-3T 3 Ton Jack Stands (Set of 2)
SHOW PRICE
60
$
65
$
#5150115
Ranger RJS-6T 6 Ton Jack Stands (Set of 2)
SHOW PRICE
110
$
#5150120
118
$
Ranger RML-1100 Motorcycle Jack #5150071
SHOW PRICE
180
$
• Lifting Capacity - 1,500 lbs. • Height - 7.75”- 45” • Table Width - 29.5”- 51” • Table Length - 79.5”- 99.75”
1-800-253-2363 • bendpak.com/SEMA
193
$
• Lifting Capacity - 1,100 lbs. • Height - 3.5”- 16” • Top Dimensions - 6”- 17.75”
43
Shop Equipment Ranger RST-1WS Rolling Work Seat
SHOW PRICE
85
$
#5150514
87
$
Ranger RWS-1B Bubble Wheel Balancer #5156100
Ranger RWS-3TC Manual Tire Changer
SHOW PRICE
170
$
182
#5150400
$
• Hub Hole Diameter - 1.5”- 4.5” • Calibrated at - 90º- 180º- 270º- 360º • Width - 12” / Height - 23”
SHOW PRICE
185
$
• Tire Capacity - 8”- 7.5” x 16” • Wheel Plate Diameter - 7.5” • Base Dimensions - 15” x 18”
• Steel Tubing - 1” • Swivel Casters - 2.5” • Relieves sore back muscles
Ranger RH-50PL Hose Reel
Ranger RIC-4716 Inflation Cage
#5150211
#5150315
SHOW PRICE
SHOW PRICE
850
345
$
• Air Pressure - 300 psi • Hose Length - 50’ • Fittings - 3/8”
• Max Tire Width - 16" • Max Tire Diameter - 47" • Solid-steel welded-steel base
$
920
$
375
$
Ranger RWL-150T Pneumatic Wheel Lift
SHOW PRICE
780
$
845
#5150355
$
• Lifting Capacity - 150 lbs. • Pneumatic Operation • Welded Steel Construction
LiteStix LS36SMD Rechargeable Work Light #5150029
SHOW PRICE
99
$
114
$
• Max. Lumen - 1,200 • Number of LED Lights - 36 • Light Bar Dimensions - 42.25” x 2.5” • Cradle Frame Length Range - 49.5” - 79.75”
Fits R980XR & R980AT
BendPak MLS-18 Mobile Jack Stand #5175001
SHOW PRICE
900
$
975
$
• Holding Capacity - 18,000 lbs. • Height - 48.75”- 74.5” • Base Diameter - 32”
44
Free shipping on most BendPak products to the 48 contiguous states.
199
$
Variability in Specifications and Features: All product specifications and features listed in this catalog are for reference only. For a more accurate and comprehensive listing of product specifications and features, visit www.bendpak.com. The contents of this catalog are subject to change.
Ranger RCD-1TD Wheel Dolly Auto Carts
Ranger RCD-2V 4,400-lb. Capacity Vehicle Dolly
SHOW PRICE
200
$
#5150190
SHOW PRICE
355
$
#5150409
385
• Caster Size - 4.5” $ • Overall Height - 10” • Lifting Capacity - 4,400 lbs. (Each)
217
• Capacity - 1,000 lbs. (Each) $ • Dimensions - 15.5” x 23.5” • 3.5” Cast Iron Ball Bearing Casters
RCD-1500EX
Ranger GoCart™
Ranger RCD-1500 GoCart™ Vehicle Dolly
SHOW PRICE
Storage Stand
175
$
#5150600
189
$
Ranger RWB-2D 2-Drawer Work Bench
660
$
715
$
Ranger RCD-1500EX GoCart™ Vehicle Dolly Extended
460
Ranger RWB-2S 2-Shelf Work Bench
SHOW PRICE
750
$
#5145335
810
#5150103
#5150470
188
$
• Holding Capacity - 1,500 lbs. • Screw Travel - 13” • Adjustable Width - 40”- 63”
Ranger RWB-1TD Work Bench w/Fluid Catcher
SHOW PRICE
750
$
#5145336
815
$
• Height - 40” • Width - 48” • Depth - 32”
• Height - 34.5” • Width - 79” • Depth - 25.25”
Ranger RES-1TF Engine Stand
175
• Load Rating Each - 1,500 lbs. • Tire Width Capacity - 13” • Tire Diameter Capacity - 19”- 37”
$
Ranger RST-500ES Engine Support
$
425 $
• Height - 34.5” • Width - 59” • Depth - 25.25”
SHOW PRICE
420
$
$
TM
TM
(Sold as Pair)
SHOW PRICE
#5150191
SHOW PRICE
#5145330
390
$
• Load Rating Each - 1,500 lbs. • Tire Width Capacity - 12” • Tire Diameter Capacity - 15”- 28”
TM
• Load Rating - 200 lbs. • Dimensions - 19” x 31” x 9” • Holds up to 4 GoCart™ Dollies
SHOW PRICE
#5150595
Ranger RSC-2TF Folding Shop Crane
SHOW PRICE
#5150105
SHOW PRICE
510
355
$
• Holding Capacity - 2,000 lbs. • Front Width - 31” / Rear Width - 27.5” • Height - 37.5” / Length - 41”
• Boom Length - 40”- 63” • Boom Capacity - 1,100 - 4,400 lbs. • Boom Height - 80”- 93”
$
385
$
1-800-253-2363 • bendpak.com/SEMA
550
$
45
Shop Equipment Ranger RP-20T 20-Ton Bottle Jack Shop Press
Ranger RP-20HD 20-Ton Hydraulic Shop Press
#5150496
Ranger RD-15 15-Gallon Low-Profile Oil Drain
#5150059
SHOW PRICE
325
$
#5150206
SHOW PRICE
535
$
760
$
580
• Capacity - 15 gal. • Height - 8.5”
825
$
$
• Capacity - 40,000 lbs. • Cylinder Stroke - 8” • Width - 23” / Height - 59”
• Capacity - 40,000 lbs. • Cylinder Stroke - 5.5” • Width - 37” / Height - 60.25”
Ranger RD-9G 9-Gallon Oil Drain
Ranger RD-18G 18-Gallon Oil Drain with Pump
#5150997
#5150995
SHOW PRICE
105
Ranger RD-20SE 20-Gallon Air-Evac Portable Oil Drain #5150996
SHOW PRICE
SHOW PRICE
$
405
$
205
$
109
$
440
$
218
$
• Capacity - 9 gal. • Height - 32”- 64” • Funnel Diameter - 18”
• Capacity - 18 gal. • Height - 56”- 72” • Evacuation Pump
Ranger RP-20FC Oil Filter Crusher with Stand
Ranger RP-30FCH Electric / Hydraulic Oil Filter Crusher with Stand
#5150067
#5150008
SHOW PRICE
SHOW PRICE
2,170
$
1,635
$
350
$
SHOW PRICE
2,355
$
1,775
$
• Capacity - 20 gal. • Height - 52”- 83” • Funnel Diameter - 16”
Ranger RP-50FC Heavy-Duty Oil Filter Crusher with Stand #5150401
SHOW PRICE
4,100
$
4,455
$
(Barrel not included)
• Capacity - 10 Ton / Cycle Time - 15 - 20 sec. • Air Requirements - 125 - 175 psi • Dimensions - 29.5” x 17” x 17”
46
• Capacity - 15 Ton / Cycle Time - 8 - 15 sec. • Power Supply - 208-240V / 50/60Hz / 1 Ph • Dimensions - 75” x 42.5” x 17”
(Barrel not included)
• Capacity - 25 Ton / Cycle Time - 8 - 15 sec. • Power Supply - 208-240V / 50/60Hz / 1 Ph • Dimensions - 90.5” x 32.5” x 31.5”
Prices Valid October 31st - November 10th, 2023
Portable Evaporative Air Coolers Cool Boss CB-12SL Portable Air Cooler
Cool Boss CB-14SL Portable Air Cooler
SHOW PRICE
SHOW PRICE
#5150018
#5150030
1,200
$
Cool Boss CB-26SL Portable Air Cooler #5150026
1,405
$
1,300
1,875
$
1,525
$
$
OPTIONAL 208-230V Model
OPTIONAL 208-230V Model
#5150017
#5150031
CB-12SLH
OPTIONAL 208-230V Model
CB-26SLH #5150037
CB-14SLH
• Fan Diameter - 12" • Water Capacity - 15 Gal • Max. Airflow - 1,565 CFM
• Fan Diameter - 14" • Water Capacity - 15.6 Gal • Max. Airflow - 2,300 CFM
Cool Boss Protective Cover Small - #5326303 STARTING AT Med. - #5326304 Large - #5326305 $
Cool Boss CB-16L Portable Air Cooler
65
90
$
• Fan Diameter - 26" • Water Capacity - 50 Gal • Max. Airflow - 7,115 CFM
Cool Boss CB-16 Ducting Kit #5150236
#5150151
SHOW PRICE
SHOW PRICE
170
2,050
$
SHOW PRICE
1,725
$
$
180
2,225
$
$
OPTIONAL 208-230V Model
CB-16H #5150176
• Small Fits - CB-16 • Medium Fits - CB-28 • Large Fits - CB-36
Cool Boss CB-28L Portable Air Cooler #5150152
Cool Boss CB-36L Portable Air Cooler #5150153
SHOW PRICE
2,850
$
• Length - 15 ft. • Flexible Reinforced Polyvinyl Duct • Strap and Buckle for Attaching
• Fan Diameter - 16" • Water Capacity - 60 Gal • Max. Airflow - 4,950 CFM
3,095
$
OPTIONAL 208-230V Model
CB-28H #5150177
• Fan Diameter - 28" • Water Capacity - 180Gal • Max. Airflow - 9,020 CFM
SHOW PRICE
3,955
$
4,295
$
OPTIONAL 208-230V Model
CB-36H #5150178
• Fan Diameter - 36" • Water Capacity - 115 Gal • Max. Airflow - 12,615 CFM
1-800-253-2363 • bendpak.com/SEMA
47
Industrial Ceiling Fans Cool Boss CB11HVLS Industrial Ceiling Fan
Cool Boss CB16HVLS Industrial Ceiling Fan
#5150201
#5150202
SHOW PRICE
3,220
$
SHOW PRICE
3,860
$
3,495
4,195
$
$
• Fan Diameter - 11 ft. • RPM - 90 Max. • Air Volume - 148,321 CFM
• Fan Diameter - 16.5 ft. • RPM - 78 Max. • Air Volume - 360,210 CFM
11.5 ft. Diameter
16.5 ft. Diameter
Improves Aerodynamic Performance
Cool Boss CB20HVLS Industrial Ceiling Fan #5150237
Advanced PMSP Motor Control
SHOW PRICE
4,780
$
#5150238
SHOW PRICE
4,965
$
5,195
5,395
$
$
• Fan Diameter - 20 ft. • RPM - 60 Max. • Air Volume - 448,496 CFM
48
Cool Boss CB24HVLS Industrial Ceiling Fan
20 ft. Diameter
• Fan Diameter - 24 ft. • RPM - 55 Max. • Air Volume - 524,422 CFM
24 ft. Diameter
Free shipping on most BendPak products to the 48 contiguous states.
Portable Air Coolers Coolee CL-240 3-in-1 Portable Air Cooler #5150019
SHOW PRICE
315
$
340
$
• Nominal Voltage: 12V DC • Bluetooth Speakers • Dual Cooling Modes • 14 quarts of cooler space • Rechargeable 10,000mAh battery
Coolee CL-50R Wheeled Ice Chest, Air Cooler, Bluetooth Stereo & Power Bank #5150078
FREE
GPS ASSET TRACKER INCLUDED • Battery Charger INCLUDES: • Shoulder Strap • Cooler • Battery Pack • Air Flow Nozzle
Coolee CL-240 CAMO 3-in-1 Portable Air Cooler
#5150033
SHOW PRICE
315
$
340
$
• Nominal Voltage: 12V DC • Bluetooth Speakers • Dual Cooling Modes • 14 quarts of cooler space • Rechargeable 10,000mAh battery
FREE
GPS ASSET TRACKER INCLUDED • Battery Charger INCLUDES: • Shoulder Strap • Cooler • Battery Pack • Air Flow Nozzle
NEW!
SHOW PRICE
530
$
575
$
• Nominal Voltage: 12V DC • Bluetooth Speakers • Dual Cooling Modes • 50 quarts of cooler space • (2) Rechargeable 10,000mAh batteries
1-800-253-2363 • bendpak.com/SEMA
INCLUDES - Battery Charger - 2 Batteries - 2 Directional Nozzles
49
30440 Agoura Rd • Agoura Hills, CA USA 91301 Tel: 1-800-253-2363 • www.bendpak.com © 2023 BendPak Inc. All rights reserved.