How to clean Epson Printer Print head ? When your Epson printer is printing incomplete or weird lines probably requires printhead and nozzle clean. The cleanup process can be also performed within the device from the menu on the screen without opening the device panels. Most Epson printers are integrated with effective ink cycling feature that would clear-up waste of dried ink or air in couple of cycles. Once the cleaning cycle has been initiated must not be interrupted and the following process may take some time in completion, therefore the user has to be patient.
For convenient help, refrain troubleshooting process on your own and take help from Epson Printer Tech Support engineers instead. Their engineers are equipped with some advance diagnosis tools that help them overcome any critical issue even faster.
Moreover, you can proceed with simple cleaning cycle:
Ensure that your printer has no error popped on its screen before initiating any troubleshooting Now press Home button and tap on Setup, then select Maintenance Further select Printhead Nozzle Check Now the printer will print a page with four colored grids designed to detect the blocked nozzle Press Done when no gaps are found If there are still gaps or lines in prints, then select Clean the printhead and proceed
The following method may not apply to your specific Epson printer model, then immediately consult with Epson Printer Customer Support agents for further assistance. When you could not repair your printer despite performing the instructions, then it may have another cause behind the issue. Important note: If you have already performed the above task and could be rectify the issue, then leave your printer idle for upto six hours. After six hours, perform cleaning cycle again and check if the print quality has been improved or not. Do not keep running cleaning cycle over and over, this will ultimately waste your ink for no reason. Moreover, doing the cycle over and over without any time gap may even make the situation worse, therefore it is highly recommended to wait for few hours after performing first cleaning cycle. Yet, no effective solution obtained, then speaks with professional engineers at Epson Support Phone Number and let them know your printer issue for better guidance.