BAUKRANE - Sales Catalogue 01/2021

CONTENTS: 1. SLAB FORMWORK SYSTEMS

4

1.1 BAUDECK

4

1.2. BAUTREG

6

1.3. SPECIAL OFFER

8

1.4. SLAB SYSTEMS

1.5. SET 100m2 BAUTREG

10 13

2. WALL FORMWORK SYSTEMS

14

2.1 BAUTEKK

14

2.2. SET 100m2 BAUTEKK

17

2.3. BAUFRAME

18

2.4. SET 100m2 BAUFRAME

21

2.4. BAUFRAME-ALU

22

2.4. SET 100m2 BAUFRAME-ALU

25

3. FORMWORK ACCESSORIES

26

26

3.1 SPECIAL OFFER

4. FORMWORK PLYWOOD

36

6. SET 100m2 P70 SCAFFOLDING

38

3

SLAB FORMWORK

BAUDECK

ALUMINIUM SLAB FORMWORK

BAUDECK is an aluminium system slab formwork. It’s an alternative for a traditional beam system.

The system is based on modular aluminium panels with the widths of 450, 600, 750, 900, 1800 [mm] and lengths of 900, 1800 [mm]. The construction consists of an aluminium frame of panels, 140 [mm] thick, with corner reinforcements to increase durability and impact resistance. The panel sheathing is made of waterproof plywood, with a thickness of 9 [mm].

The system is very easy to use thanks to a small number of elements: panels. Props and accessories. The system is installed in only three simple steps: hooking up, swivelling upwards, placing props. Low weight , thanks to aluminium construction (e.g. 1800 x 1800 [mm] panels weighs 53.14 [kg]), as well as simplicity of the module connections make it safe to assembly the panels by only 2 people from the floor level (up to max.height of 3.5 [m]).

4

SLAB FORMWORK NAME

WEIGHT (kg)

BAUDECK PANEL 180x180

53,14

BAUDECK PANEL 90x180

27,00

BAUDECK PANEL 75x180

23,60

BAUDECK PANEL 60x180

20,60

BAUDECK PANEL 45x180

17,20

BAUDECK PANEL 90x90

16,00

BAUDECK PANEL 75x90

13,40

BAUDECK PANEL 60x90

11,76

BAUDECK PANEL 45x90

10,05

BAUDECK UNI PANEL 90x180

24,50

BAUDECK UNI PANEL 90x90

15,00

BAUDECK HEAD

2,50

BAUDECK DROP HEAD

8,00

BAUDECK OHS HEAD

3,50

ADJUSTMENT BEAM 180

7,20

ADJUSTMENT BEAM 90

3,60

BAUDECK TRANSVERSE BEAM

4,40

BAUDECK STAND

4,75

BAUDECK HEAD SUPPORT SHOE

0,60

BAUDECK CORNER HEAD COVER

0,82

BAUDECK ROD

3,20

BAUPROP BOLT

0,15

BAUPROP PROP 20-300

16,80

BAUPROP PROP 20-350

18,80

BAUPROP PROP 20-400

22,50

BAUPROP PROP 20-550

37,50

5

SLAB SYSTEMS

BAUTREG BEAM SLAB FORMWORK

BAUTREG is an economical, traditional slab formworksystem. The system is designed in such way to facilitate different thickness of ceillings of any geometry. Thanks to its light and durable construction, the system is easy and convenient to use when assemblying manually on on site.

SYSTEM ADVANTAGES: • easy and accurate • one scheme of assembly (very simple method of selecting the appropriate spacing of individual elements) • simple mechanism allowing to release and strip props easily • durable elements made of highquality materials • smooth surface obtained does nor require plastering • high loading capacity

6

SLAB SYSTEMS NAME

WEIGHT (kg)

DB300 BAUKRANE ECO PROP 20kN

16,30

DB350 BAUKRANE ECO PROP 20kN

18,00

UNIVERSAL ECO PALLET

18,00

DB300 BAUKRANE-T PROP HDG 20kN

15,90

DB350 BAUKRANE-T PROP HDG 20kN

17,02

BAUPROP PROP 20-300

16,80

BAUPROP PROP 20-350

18,80

BAUPROP PROP 20-400

22,50

BAUPROP PROP 20-550

37,50

POWDER COATED PROP 300 (1.70-3.00m)

8,60

POWDER COATED PROP 350 (1.95-3.50m)

9,80

POWDER COATED PROP 400 (2.20-4.00m)

11,00

VARNISHED PROP 300 (1.60-3.00m)

8,60

VARNISHED PROP 360 (2.00-3.60m)

9,80

VARNISHED PROP 400 (2.20-4.00m)

11,00

VARNISHED PROP 500 (3.00-5.00m)

14,00

EG HEAD

1,60

EG HEAD

2,00

HDG HEAD

2,30

TRIPOD 6.0kg HDG

6,00

TRIPOD 5.0kg EG

5,00

R20 BEAM WITHOUT EDGE PROTECTION

5,00

R20 BEAM WITH EDGE PROTECTION

5,00

BT20 BEAM

4,80

UNIVERSAL PALLET

39,50

7

SLAB FORMWORK

BAUPROP PROP 20

High quality, certified ceiling support with high load capacity of 20 kN (Sigma certificate and "U" marking), adjustable in height (with thread for its precise adjustment), equipped with hand protection. The embossed shape of the footplate provides additional strength. Anti-corrosion protection in the form of hot-dip galvanizing.

BAUPROP PROP 20 3,0m Parameters: Dimensions: 171.5 - 300 cm Weight: 16.8 kg 20kN

BAUPROP PROP 20 3,5m Parameters: Dimensions: 195 - 350 cm Weight: 18.80 kg 20kN

BAUPROP PROP 20 4,0m Parameters: Dimensions: 221 - 400 cm Weight: 22.50 kg 20kN

8

BEST QUALITY

SLAB FORMWORK

SPECIAL OFFER

R20 BEAM WITH EDGE PROTECTION Permissible load as per EN-13377 max. bending moment M=5kNm max. shear force Q=11kN rigidity EI=450kNm2 support reaction A=22kN Weight and dimensions: beam height [mm]: 200 beam width [mm]: 80 flange height [mm[: 40 web height [mm]: 120 web width [mm]: 27 weight [kg/m]: 4.7

ASK FOR A PRICE

R20 timber beams are designed to be used as a part of a traditional slab formwork or specialised wall formwork. They are made in the form of a balk, with an I-section. The beam ends are protected against mechanical damage with plastic shapes.

9

SLAB SYSTEMS

10

VARNISH PROP

POWDER COATED PROP

Varnished props are made of steel pipes, protected on the inside and outside against corrosion with a varnish. The average load-bearing capacity, with a maximum extension, is 10kN.

Powder coated props are easily adjusted, which is particularly useful when erecting slabs of different heights. The props are equipped with threads for smooth regulation of the height. Protected against corrosion with a layer of weatherproof paint.

Type

Weight (kg)

Type

Weight (kg)

150 (1,00-1,50m)

5,20

POWDER COATED 300 (1,70-3,00m)

8,60

300 (1,60-3,00m)

8,60

POWDER COATED 350 (1,95-3,50m)

9,80

360 (2,00-3,60m)

9,80

POWDER COATED 400 (2,20-4,00m)

11

400 (2,20-4,00m)

11

500 (3,00-5,00m)

14

BAUKRANE ECO 20 PROP

B300 & B350 PROP

Ceiling supports with adjustable height and thread for its precise adjustment - which makes it possible to use them for building ceilings of different heights.

Equipped with protection against hand injury.

The supports are characterized by high bearing capacity of 20kN and anti-corrosion protection in the form of zinc coating. The supports use 8mm thick reinforced feet and the highest quality pipes with a diameter: inner pipe - 48,3mm, outer pipe 60,3mm. - 60,3mm

Ceiling supports, in an economic variant, with thread for height adjustment and protection against hand injury. High load capacity (even up to 20kN) and anticorrosion protection in the form of zinc plating are the main advantages of this product. The supports use 8mm thick reinforced feet and the highest quality pipes with the following diameters: internal pipe - 48.3mm, external pipe - 60.3mm. - 60,3mm

Type

Weight (kg)

Type

Weight (kg)

300 (175-300cm)

16,3

300 (175-300cm)

15,9

350 (200-350cm)

18

350 (200-350cm)

17,02

SLAB SYSTEMS

TRIPODS

EG HEAD

Tripods are used to stabilise props during slab erection. Galvanised surface extends their life span and allows to store them in any weather conditions.

These heads are used to stabilise H20 beams. The spacing between the forks allows to place one beam, and after turning the head by 90o - two beams.

Universla spacing matches all types of beams..

Galvanised surface provides high protection against corrosion. Low weigh of the product.

Type

Weight (kg)

HDG Tripod

6 kg

Dimensions (cm)

Weight (kg)

EG Tripod

5 kg

22x14

2,0

EG HEAD

HDG HEAD

These types of heads are used to suppport beams.

The spacing of the head forks allows to place one beam, and after turning the head by 90o - two beams. Galvanised surface provides high protection against corrosion. Low weight of the product.

These heads are used to stabilise H20 beams. The spacing of the head forks allows to place one beam, and after turning the head by 90o - two beams. Hotdip galvanised. The thickness of zinc layer is much higher, providing protection against corrosion both on the outside and inside.

Dimensions (cm)

Weight (kg)

Dimensions (cm)

Weight (kg)

22x14

1,60

22x14

2,3

11

SLAB SYSTEMS

BT20 BEAM

R20 BEAM WITHOUT EDGE PROTECTION

The beam is made of spruce timber, with an I-shaped section and a height of 20 cm and flanges width of 8 cm. The web width is 27 mm. The beam ends are protected with rounted plastic shapes which serves as shock absorbers.

R20 beams are the basic element of th eslab formowrk system. Permissible bending moment is 5.0 [kNm], permissible shear force 11.0 [kN].

Dimension (cm)

Weight (kg)

Dimension (cm)

Weight (kg)

120

6

145

7,10

150

7,5

190

9,50

190

9

210

10,50

245

12,25

245

12,01

265

13,25

330

16,5

290

14,5

360

18

300

15

390

19,5

330

16,5

420

21

360

18

450

22,5

390

19,5

490

24,5

590

29,5

420

23,1

450

24,75

490

26,95

SEE MORE PRODUCTS ON:

WWW.BAUKRANE.PL/SKLEP

12

SLAB SYSTEMS

SET 100m2: BAUTREG I THE SET INCLUDES: NAME VARNISHED PROP 300 (1,60-3,00m)

120 pcs

EG HEAD

50 pcs

EG TRIPOD 5kg

30 pcs

R20 BEAM WITH EDGE PROTECTION

369 lm

3-PLY PANELS 500X2000X21 EDGE PROTECTION E CLASS I

100 pcs

The BAUTREG 100m2 ECO set is an economical, traditional slab formwork system . This system is used when erecting ceilings of different thickness, of any geometry. Thanks to light and durable consruction, the system is easy and convienient to use when assembled manually on site.

High quality elements of the BAUTREG system. The set includes: varnished props 300 (1.60 - 3.00m), R20 timber beam with edge protection, tripods and galavanised heads. The sheathing of the slab consists of a 3-ply formwork panel with a type E edge protection.

13

WALL SYSTEMS

BAUTEKK WALL FORMWORK

THE BAUTEKK WALL FORMWORK is a lightweight and universal formwork. To be used with TEKKO system.

Designed for small structures such as: • foundations strips and walls, • ground beam and fencing foundation, • pad foundation, chambers and wells, tanks, • downstand beams, ribs and tie beams, • columns and reinforced concrete cores.

The system has been designed to meet all necessary technical and economic conditions of small and mediumsized buildings, especially in residential construction. Thanks to the size of the elements, the Bautekk system is also suitable for the construction of complex reinforced concrete elements of industrial buildings. Due to its low weight and durability, the system can be easily assembled by hand.

14

WALL SYSTEMS NAME

WEIGHT (kg)

BAUTEKK PANEL 90x150

44,07

BAUTEKK PANEL 90x150 VT

53,83

BAUTEKK PANEL 75x150

40,02

BAUTEKK PANEL 70x150 VT

45,23

BAUTEKK PANEL 60x150

32,49

BAUTEKK PANEL 60x150 VT

40,83

BAUTEKK PANEL 50x150

29,78

BAUTEKK PANEL 45x150

28,43

BAUTEKK PANEL 30x150

20,69

BAUTEKK PANEL 25x150

19,34

BAUTEKK PANEL 20x150

14,08

BAUTEKK PANEL 10x150

11,20

BAUTEKK INNER CORNER 20x20x150

28,00

BAUTEKK INNER CORNER 15x15x150

25,00

BAUTEKK OUTER CORNER 0x150

10,00

BAUTEKK HINGED CORNER 8X8X150

20,40

BAUTEKK ADAPTOR ANGLE 150

7,00

BAUTEKK PANEL 90x120

35,33

BAUTEKK PANEL 90x120 VT

43,31

BAUTEKK PANEL 75x120

31,99

BAUTEKK PANEL 70x120 VT

36,42

BAUTEKK PANEL 60x120

25,83

BAUTEKK PANEL 60x120 VT

32,88

BAUTEKK PANEL 50x120

23,65

BAUTEKK PANEL 45x120

22,32

BAUTEKK PANEL 30x120

16,20

BAUTEKK PANEL 25x120

14,87

BAUTEKK PANEL 20x120

11,48

BAUTEKK PANEL 10x 20

9,07

BAUTEKK INNER CORNER 20X20X120

24,00

BAUTEKK INNER CORNER 15x15x120

21,00

BAUTEKK OUTER CORNER 0X120

8,00

BAUTEKK HINGED CORNER 8X8X120

16,90

BAUTEKK ADAPTOR ANGLE 120

5,30

BAUTEKK PANEL 90x90

27,84

BAUTEKK PANEL 90x90 VT

35,33

BAUTEKK PANEL 75x90

25,22

BAUTEKK PANEL 70x90 VT

29,48

15

WALL SYSTEMS NAME

16

WEIGHT (kg)

BAUTEKK PANEL 60x90

44,07

BAUTEKK PANEL 60x90 VT

53,83

BAUTEKK PANEL 50x90

40,02

BAUTEKK PANEL 45x90

45,23

BAUTEKK PANEL 30x90

32,49

BAUTEKK PANEL 25x90

40,83

BAUTEKK PANEL 20x90

29,78

BAUTEKK PANEL 10x90

28,43

BAUTEKK INNER CORNER BAUTEKK 20x20x90

20,69

BAUTEKK INNER CORNER BAUTEKK 15x15x90

19,34

BAUTEKK INNER CORNER BAUTEKK 20x20x60

14,08

BAUTEKK INNER CORNER BAUTEKK 15x15x60

11,20

BAUTEKK OUTER CORNER 0x90

28,00

BAUTEKK OUTER CORNER 0x60

25,00

BAUTEKK HINGED CORNER 8x8x90

10,00

BAUTEKK ADAPTOR ANGLE 90

20,40

BAUTEKK ADAPTOR ANGLE 60

7,00

WALL SYSTEMS

SET 100m2: BAUTEKK STANDARD THE SET INCLUDES: NAME BAUTEKK PANEL 90x150

64 pcs

BAUTEKK PANEL 75x150

6 pcs

BAUTEKK PANEL 45x150

6 pcs

BAUTEKK INNER CORNER 20x20x150

2 pcs

BAUTEKK INNER CORNER 15x15x150

2 pcs

BAUTEKK OUTER CORNER 0X150

4 pcs

DW-15 TIE ROD 75 cm

90 pcs

Ø100 NUT

180 pcs

BAUTEKK CONNECTOR

220 pcs

BAUTEKK standard 100m2 set is a universal and lighweight formwork to be assembled manually. This formwork can be used with the TEKKO system. The formwork panels can be assembled and handled by only one person. The BAUTEKK system is ideal both for simple foundations and complicated reinforced concrete structures in industrial constructions. Durable hot dip galvanised frame is built with a waterproof birch plywood 12 mm thick. Despite its low weight, this formwork guarantes resistance to fresh concrete mix pressure up to 40kN/m2.

BAUTEKK system panels are equipped with a unique solution. At the height of the tie passes they have a metal pocket with 3 tie-beam holes. This solution protects the board sheathing against damage. This solution protects the board sheathing against damages resulting from multiple tie-beams installation, thus increasing the life of the shuttering boards.

17

WALL SYSTEMS

BAUFRAME WALL FORMWORK

The BAUFRAME system is a universal solution for a wide range of applications, especially in medium-sized residential constructions. Due to high strenght of 60kN/m2, lightness and simplicity of use, this formwork is an ideal solution on any construction site. A wide range of panel sizes allows to use them comfortably - both manually and with the use of a crane.

UNIVERSALITY • a wide range of system components allows to adjust formowrk to any project , • full compatibility with Bauframe-Alu, Bauschal, Rasto, MidiBox and Rhino, • universal panels for erecting columns and corners

18

DURABILITY • strong steel profile with the thickness of 12 [cm] made of high-quality steel, • hot dip galvanised frame, • steel reinforcement of holes for tie rods, • high-quality birch plywood with a coating 280 [g/m2]

WALL SYSTEMS NAME

WEIGHT (kg)

BAUFRAME PANEL 240x300

344,85

BAUFRAME PANEL 180x300

275,23

BAUFRAME PANEL 120x300

175,69

BAUFRAME PANEL 90x300

90,45

BAUFRAME PANEL 90x300 VZ

140,48

BAUFRAME PANEL 75x300

80,10

BAUFRAME PANEL 70x300 VZ

113,40

BAUFRAME PANEL 65x300

73,42

BAUFRAME PANEL 60x300

70,00

BAUFRAME PANEL 55x300

66,74

BAUFRAME PANEL 50x300

63,32

BAUFRAME PANEL 45x300

57,45

BAUFRAME PANEL 30x300

49,32

BAUFRAME PANEL 25x300

45,90

BAUFRAME INNER PANEL 30x30x300

44,74

BAUFRAME OUTER CORNER BAUFRAME 0x0x300

31,10

BAUFRAME HINGED CORNER 30x30x300

92,42

BAUFRAME HINGED CORNER 15x15x300

74,80

BAUFRAME PANEL 240x270

302,58

BAUFRAME PANEL 180x270

248,52

BAUFRAME PANEL 120x270

157,05

BAUFRAME PANEL 90x270

82,11

BAUFRAME PANEL 90x270 VZ

124,34

BAUFRAME PANEL 75x270

71,59

BAUFRAME PANEL 70x270 VZ

100,05

BAUFRAME PANEL 65x270

65,52

BAUFRAME PANEL 60x270

62,41

BAUFRAME PANEL 55x270

59,43

BAUFRAME PANEL 50x270

56,34

BAUFRAME PANEL 45x270

51,88

BAUFRAME PANEL 30x270

43,47

BAUFRAME PANEL 25x270

40,38

BAUFRAME INNER PANEL 30x30x270

72,20

BAUFRAME OUTER CORNER BAUFRAME 0x0x270

28,02

BAUFRAME HINGED CORNER 30x30x270

82,35

BAUFRAME HINGED CORNER 15x15x270

67,36

BAUFRAME PANEL 90x150

50,67

BAUFRAME PANEL 90x150 VZ

71,96

19

WALL SYSTEMS NAME

20

WEIGHT (kg)

BAUFRAME PANEL 75x150

43,82

BAUFRAME PANEL 70x150 VZ

57,72

BAUFRAME PANEL 65x150

40,18

BAUFRAME PANEL 60x150

38,34

BAUFRAME PANEL 55x150

36,54

BAUFRAME PANEL 50x150

34,69

BAUFRAME PANEL 45x150

31,50

BAUFRAME PANEL 30x150

26,40

BAUFRAME PANEL 25x150

24,55

BAUFRAME INNER CORNER 30x30x150

42,46

BAUFRAME OUTER CORNER 0x0x150

15,68

BAUFRAME HINGED CORNER 30x30x150

47,83

BAUFRAME HINGED CORNER 15x15x150

37,62

WALL SYSTEMS

SET 100m2: BAUFRAME STANDARD THE SET INCLUDES: NAME BAUFRAME PANEL 90x270

36 pcs

BAUFRAME PANEL 75x270

10 pcs

BAUFRAME PANEL 60x270

2 pcs

BAUFRAME PANEL 55x270

2 pcs

BAUFRAME PANEL 45x270

2 pcs

BAUFRAME PANEL 30x270

2 pcs

BAUFRAME INNER CORNER 30x30x270

4 pcs

BAUFRAME WEDGE CLAMP

160 pcs

CORNER CLAMP

16 pcs

ARTICULATED NUT 113X113

160 pcs

DW-15 TIE ROD 100CM

80 pcs

The BAUFRAME 100m2 standard set is a technically advanced product of the highest quality, designed and manufactured by Baukrane, using the latest tools and methods. The frame of each steel panel is made of a closed outer profile with a height of 121mm and width of 20mm, and an inner profile of 105mm height and 25mm width.

Permissible pressure of fresh concrete mix is 60kN/m2. The Bauframe wall formwork is designed for a wide range of applications, in projects such as: -reinforced concrete walls in residential and industrial constructions, -vertical partitions in civil engineering constructions, - reinforced columns and cores, - massive foundations and pad foundations

The system has been designed to meet all technical, economical and safety conditions during residential and industrial projects. Thanks to its construction, this formowrk is easy and convienient to use when assembled by hand or with the use of a crane on site.

21

WALL SYSTEMS

BAUFRAME-ALU ALUMINIUM WALL FORMWORK

BAUFRAME-ALU is an extremely lighweight and universal solution for a wide range of applications, especially in medium-sized residentail constructions. Thanks to its high efficiency of 60 [kN/m2], lightness and simplicity of use, this formwork is an ideal solution on every building site. A wide range of panel sizes, as well as their lighness allow to handle them manually.

UNIVERSALITY • wide range of system components makes it easy to adjust the formwork to any project, • full compatibility with BauframeAlu, Bauschal, Rasto, MidiBox and Rhino, • universal panels for erecting columns and corners.

22

DURABILITY • strong aluminium profile with the thickness of 12 [cm] • corners of the frame made of highquality aluminium • holes for ties rods additionally reinforced with an aluminium ring, • highquality birch plywood with a coating

WALL SYSTEMS NAME

WEIGHT (kg)

BAUFRAME PANEL ALU 90x300

62,69

BAUFRAME PANEL ALU 75x300

54,24

BAUFRAME PANEL ALU 70x300 VZ

75,38

BAUFRAME PANEL ALU 65x300

48,36

BAUFRAME PANEL ALU 60x300

45,80

BAUFRAME PANEL ALU 55x300

43,31

BAUFRAME PANEL ALU 50x300

40,75

BAUFRAME PANEL ALU 45x300

38,19

BAUFRAME PANEL ALU 30x300

30,81

BAUFRAME ALU INNER CORNER 30x300

44,74

BAUFRAME PANEL ALU 90x270

56,72

BAUFRAME PANEL ALU 75x270

49,00

BAUFRAME PANEL ALU 70x270 VZ

67,02

BAUFRAME PANEL ALU 70x270

45,89

BAUFRAME PANEL ALU 65x270

43,57

BAUFRAME PANEL ALU 60x270

41,25

BAUFRAME PANEL ALU 55x270

39,00

BAUFRAME PANEL ALU 50x270

36,67

BAUFRAME PANEL ALU 45x270

34,35

BAUFRAME PANEL ALU 40x270

32,09

BAUFRAME PANEL ALU 35x270

29,79

BAUFRAME PANEL ALU 30x270

27,66

BAUFRAME ALU INNER CORNER 30x270

40,26

BAUFRAME PANEL ALU 90x150

35,47

BAUFRAME PANEL ALU 75x150

30,77

BAUFRAME PANEL ALU 70x150 PZ

39,85

BAUFRAME PANEL ALU 65x150

28,14

BAUFRAME PANEL ALU 60x150

26,90

BAUFRAME PANEL ALU 55x150

25,67

BAUFRAME PANEL ALU 50x150

24,38

BAUFRAME PANEL ALU 45x150

22,25

BAUFRAME PANEL ALU 30x150

18,95

BAUFRAME ALU INNER CORNER 30x150

28,00

23

WALL SYSTEMS

TECHNICAL PARAMETERS: • angle range from 60o to 150o, • frame: 12 [cm] thick aluminium profile • sheathing: 15 [cm] thick highquality birch plywood • average weight: 45 [kg/m2] • max. concrete pressure: 60 [kN/m2], • compatibility: Bauframe, Bauschal, Rasto, MidiBox, Rhino, • standard connectors: Baukrane wedge clamps, • assembly time: 0.3 - 0.5 [h/m2]

24

WALL SYSTEMS

100m2 SET: BAUFRAME-ALU STANDARD W skład zestawu wchodzą: NAME BAUFRAME PANEL ALU 90x270

34 pcs

BAUFRAME PANEL ALU 75x270

2 pcs

BAUFRAME PANEL ALU 65x270

2 pcs

BAUFRAME PANEL ALU 45x270

2 pcs

BAUFRAME PANEL ALU 35x270

2 pcs

BAUFRAME ALU INNER CORNER 30x30x270

4 pcs

BAUKRANE WEDGE CLAMP

140 pcs

CORNER CLAMP

16 pcs

ARTICULATED NUT 113x113

160 pcs

DW-15 TIE ROD 100 cm

80 pcs

The BAUFRAME ALU panels can be installed in both horizontal and vertical position.A wide range of dimensions, it is possible to adjust the formwork height to any object height. Thanks to the construction of a side profile of the frame and a wedge clamp, th epanels can be connected with a height shift without using additional elements.

This allows to adjust the formwork to any unevenness of the ground. These panels are made of a stiff and hardened profile, the outer of which is 121mm high and 20 mm wide. The aluminium frame, thanks to its construction, is fully compatible with its steel equivalent and can be used interchangeably when erecting formwork. High-quality 15mm thick birch plywood, with a weight of 220g/cm2, creates the panel sheathing. The panel edges are protected with a shaped profile. Aluminium panels, unlike steel panels, are equipped with through hole in the plywood which are protected by aluminium hoops. They have the same function as profiles in a steel panel.

The system has been designed to meet all technical, economical and safety conditions of all residential and industrial facilities. Thanks to its construction, this formwork is easy and convenient to use when assembled by hand or with a crane on site.

25

FORMWORK ACCESSORIES

SETS ON

SPECIAL OFFER

FORMWORK SPRING CLAMP / CLAMP TENSIONER SET 1:

100 pcs. OF SPRING CLAMPS + CLAMP TENSIONER

SET 2:

150 pcs OF SPRING CLAMPS + CLAMP TENSIONER

SET 3:

200 pcs OF SPRING CLAMPS

26

ASK FOR A PRICE

FORMWORK ACCESSORIES

FORMWORK SPRING CLAMP

CLAMP TENSIONER

These clamps are equipped with a reinforced sprocket wheel placed in the clamp socket.

Tensioner clapm to be used with formwork spring clamps. Facilitates tensioning formwork with the use of rebar tie wire. This tensioner is durable and easy to use.

Galvanised.

The clamp allows to clip the formwork together with the use of rebar tie wire of 6-10 [mm] diameter.

Load-bearing capacity up to 25[kN].

Name

Weight (kg)

Name

Weight (kg)

Galvanised spring clamp

0,47

Clamp tensioner

3,4

WALER SPANNER

REBAR TIE WIRE Wire used to tie reinforcement.

Available in the folllowing size: fi 1.40 mm

Ware spanners are elements intended for fastening bolts and stiffening beams - two pieces make a set with a stiffening beam or bolt and nuts.

Name

Weight (kg)

Name

Weight (kg)

1.4 mm rebar tie wire coils

1

Waler spanner

0,8

27

FORMWORK ACCESSORIES

Ø 100 NUT

HEXAGON NUT

Nut Ø100 is cast in white malleable cast iron and protected with a zinc coating. It has flat bearing surfaces of 100mm diameter, which replace thrust washers. Internal thread enables the use of DW15 tie rods.

28

Used to connect threaded tie rods.

Type (mm)

Weight (kg)

Diameter (mm)

Weight (kg)

Hexagonal nut 100

0,42

100

0,64

Hexagonal nut 50

0,21

ARTICULATED NUT

Ø 70 NUT

These nuts along with bearing plates are made of malleable white cast iron and are galvanised. Used to tie formwork panels with the use of tie rods and spacers. They can placed at a various angles.

These nuts are cast in malleable white cast iron, protected by a zinc coating. Equipped with a bearing surface with a diameter of 70mm, which replaces thrust washers.

Dimensions (cm)

Weight (kg)

113x113

1,30

Diameter (mm)

Weight (kg)

70

0,47

FORMWORK ACCESSORIES

BAUTEKK CLAMP One-piece element used to connect panels.

BAUTEKK BOLT WITH A WEDGE These bolts allow to create tensile resistant connections, where infills are placed, up to 20 cm.

Name

Weight (kg)

Name (cm)

Bautekk clamp

0,60

Bautekk Wedge Ø15mm

0,7

Bautekk Bolt

0,2

Masa (kg)

CENTERING TENSION BOLT

FORMWORK TIE ROD

Used to connect a hinged corner with a formwork panel or to connect panels with eatch other through oval holes in their side edges. Galvanised.

Compatible with Midibox.

Tie rods with hot rolled threads, galvanised.

Permissible load-bearing capacity 90kN Dimensions (cm)

Weight (kg)

75

1,16

100

1,55

Type

Weight (kg)

Centering tension bolt 120

0,79

150

2,14

0,90

200

3

300

4,4

Centering tension bolt 200

29

FORMWORK ACCESSORIES

VARNISHED PUSH-PULL PROP

PUSH-PULL PROP

Used to align formwork. They have been designed to transfer loads coming from the weight of fromwork during its alignment.

Used to align formwork. They do nor transfer the loads coming from the concrete pressure. Sold in a set including a base plate and head.

Weight (kg)

Type (cm)

Weight (kg)

8,00

80 - 130

15,40

1,6 – 3,0

10,60

150 - 230

17,30

2,0 – 3,6

11,70

280 - 470

20,60

2,2 – 4,0

12,6

2,5 – 4,5

13,9

Type (m)

1,0 – 1,8

30

STIFFENER 100

COMPENSATION WALER

Used most commonly to form stopend formwork and to connect formwork panels with infills with a width greater than 15cm, Allows to straighten and stiffen the connection.

Used to stiffen connection of formwork panels and infills, keepin the formwork straight at the same time. To be used with waler spanners and nuts.

Dimensions (cm)

Weight (kg)

100

15

Dimensions (cm)

Weight (kg)

80

10,60

120

15,62

150

20,64

200

25,66

260

31,77

FORMWORK ACCESSORIES

VZ BAUFRAME BOLT

NET BASKET formwork

Used to connect VZ panels. Buy VZ nuts to match the bolts on in our online shop.

Equipped with hook eyes for vertical transport (crane).

Easily stackable.

- hot rolled and galavanised, - resistant to impact and weather conditions, - universal elements may be used with other systems

Used to stack accessories safely.

and

store

small

Type

Weight (kg)

Type

Weight (kg)

Net basket

76,00

VZ bolt

0,6

BAUTEKK BEAM CLAMP This element alllows to beams to the wall formwork in order to strenghten it vertically and horizontally.

Dimensions (mm)

Weight (kg)

260 x 100

0,25

SEE MORE PRODUCTS ON:

WWW.BAUKRANE.PL/SKLEP

31

FORMWORK ACCESSORIES

32

BAUKRANE WEDGE CLAMP

ALIGNING CLAMP (SHORT)

This wedge clamp is a basic element joining all types of panels and corners of the following formwork systems: Rasto, MidiBOX, RHINO and others. It may be applied in all types of connections, using only a hammer.

This element tightly closes joints between panels type Rasto, MidiBox and RHINO, but also aligns them in one plane.

Weight: 3,8 kg

Weight: 2,9 kg

Compatible with: Rasto, MidiBOX, RHINO and others

Compatible with: Rasto, MidiBOX, RHINO and others.

ALIGNING CLAMP (LONG)

CORNER CLAMP

Used for levelling the lenghts up to max. 15 cm. It connects the panels thightly and in one plane, as well as joins them in such a way that they cannot be torn apart.

Rasto corner clamps and two oridinary panels allow to form an outer corner. These corners clamps may be also used when forming columns. They also enable to adjust the lenght of the corner from 4 to 6 cm.

Weight: 5.2 kg

Weight: 6.5 kg

Compatible with: Rasto

Compatible with: Rasto

FORMWORK ACCESSORIES

RELEASE AGENT

CONCRETE PLUG

This release agent is placed on the surface of wall and slab formwork and it protects panels from concrete sticking to them. On request, we also offer special release agent for architecural concrete.

Used to tightly seal concrete pipe spacers with a two component adhesive AB. Follow the producer's instructions to obtain tight sealing.

Dimensions (cm)

Weight (kg)

2,2 x 2,0

18,00

CONCRETE SPACER

BAUKRANE PLUG

This concrete spacer is available with or without rebar tie wire. The value in the name indicates the thickness of concrete lagging obtained.

Made of plastic. Used to seal holes after tie rods in formwork panels.

Types BD 20/25/30 (300 pcs.)

ZD 20/25/35 (300 pcs.)

BD 35/45/50 (125 pcs.)

ZD 35/40/50 (125 pcs.)

Dimensions (cm)

Weight (kg)

0,20x0,24x,027

0,002

33

FORMWORK ACCESSORIES

CIRCULAR SPACER

FORMWORK PIPE PCV 22

Wkładka cytrynka – to wciskany dystans o podwyższonej wytrzymałości pozwalający uzyskać właściwą otulinę zbrojenia. Podany wymiar wskazuje w kolejności na: grubość otuliny betonu (mm), średnicę pręta zbrojenia.

This formowrk pipe is made of plastic with an inside diameter of 22mm. Special rough surface improves its adhesion to concrete. It protects tie rods from dirt and allows to reuse tie rods. Used in a set with plastic cones 22. PACKET: 100 running meter, L=200cm

Wariant

Masa (kg)

20/4-12 (500 szt) 2,0 cm

2,10

25/4-12 (500 szt) 2,5 cm

3,50

30/4-12 (500 szt) 3,0 cm

6,00

35/4-16 (250 szt) 3,5 cm

0,23

40/4-12 (125 szt) 4,0 cm

6,00

50/8-20 (250 szt) 5,0 cm

6,50

Dimensions (cm)

Weight (kg)

0,22 x 200

21,00

PLASTIC CONE 22

CONCRETE SPACER

Plastic and elsastic cone used with plastic formowrk pipes 22. Improves thightness, protecting tie rods used to connect formowrk panels from dirt.

PACKET: 500 pcs.

This concrete spacer, made of poured concrete, is used for horizontal reinforcement, . Special shape prevents it from rotation. Reinforced with a bar.

Type

34

Dimension (cm)

Packet weight (kg)

2,2

2,60

Weight (kg)

2,5x50 cm (1875 pcs. /packet)

0,60

3,0x50 cm (1400 pcs. /packet)

0,80

0,4x50 cm (925 pcs. /packet)

1,00

0,5x50 cm (650 pcs. /packet)

1,50

FORMWORK ACCESSORIES

ZZ SPACER

AL SPACER

A stable distance element used for linear support of lower reinforcement, with a lenght of 200cm.

Numerous holes allow for appropriate concrete lagginng of the reinforcement and zz spacer itself.

A stable distance element used for linear support of lower reinforcement, with a lenght of 200cm.

Numerous holes allow for appropriate concrete lagginng of the reinforcement and zz spacer itself.

Weight (kg)

Dimensions (cm)

Weight (kg)

0,11

1,5x200

0,26

2,0x200

0,17

2,0x200

0,30

2,5x200

0,19

2,5x200

0,32

Dimensions (cm) 1,5x200

3,0x200

0,23

3,0x200

0,34

4,0x200

0,33

4,0x200

0,57

5,0x200

0,43

5,0x200

0,74

DREIKA CORNER FILLET

CONCRETE PIPE

Made of resistant to impact and hardened plastic, Used for bevelling corners of conrete elements which become more resistant to impact.

Concrete pipe 22/40 with an internal diameter of 22mm, made of reinforced with structural fibre concrete.

Weight (kg)

Dimension (cm)

Weight (kg)

10x14

10,00

22/40 (1000 pcs) 125 cm

2,75

15x21

15,20

Dimension (cm)

20x28

18,00

25x35

25,60

30x42

32,40

35

V

3-PLY PANEL WITHOUT EDGE PROTECTION

21 mm

7 mm 7 mm

A 3-ply glued panel, made of coniferous wood (spruce or fir).Both side are coated with a special impregnating paint, protecting against weather conditions and water according to EN 13353 (SWP/3) and a realease varnish which prevents concrete from sticking to panels. Weight: 11 [kg] - very high-quality - smooth surface, coated with a special impregnating paint, is protected from adverse effects of water, as per EN 13353 (SWP/3), - high rigidity, - reusable Dimensions (cm) 1500 x 500 x 21

7 mm

2000 x 500 x 21 2500 x 500 x 21

3-PLY PANEL EDGE PROTECTION TYPE E

21 mm

7 mm

A 3-ply glued panel, made of coniferous wood (spruce or fir).Both side are coated with a special impregnating paint, protecting against weather conditions and water according to EN 13353 (SWP/3) and a realease varnish which prevents concrete from sticking to panels. Weight:11 [kg] - high durability, - covering the plywood with E-shaped sheet profile, provides high resistance to mechanical damage and matching the face of the plywood with repeated use, - smooth surface protected with special impregnating paint.

Dimensions (cm)

7 mm

1500 x 500 x 21 2000 x 500 x 21

7 mm

2500 x 500 x 21

BIRCH PLYWOOD 2500 X 1250 X 21 / 2500 X 1250 X 18 2440 X 1220 X 21 / 2440 X 1220 X 18

This type of pywood is obtained by pressing onto a plywood made from a deciduous tree a special resin-impregnated paper.

This process takes place under high pressure and high temperature, so that the resin penetrates the plywood and provides new properties.

Certificates: FSC certificate FC-COC-643959 CE certificate Reg. Nr. 1075 CPR Z447-10/19 Type of glueing - waterproof. Bond based on phenol-formaldehyde resin or melamine-ureaphenol-formaldehyde resin, for external use (as per PN-EN 636,, class EN 636-2 and EN 636-3)

36

FORMWORK PLYWOOD

STANDARD POPLAR PLYWOOD 2500 X 1250 X 21

Chinese-made formwork plywoods, made from poplar wood, lightweight and highly resistant to mechanical damage.

- new poplar veneers, - covered on both sides with a phenyl resin with a weight of 170 g/m² (smooth surface, which protects against adverse effects of water) - reusabble - sheet weight 36 kg.

ECO POPLAR PLYWOOD 2500 X 1250 X 21 / 2500 X 1250 X 18

Chinese-made formwork plywoods, made from poplar wood, lightweight and highly resistant to mechanical damage.

- first 3 veneers are new, the core of the plywood is made of a recycled material, - covered on both sides with a phenyl resin with a weight of 170 g/m² (smooth surface, which protects against adverse effects of water) - reusabble - sheet weight 36 kg.

BLACK COATING

with a weight of 170g/m2 hot pressed soaked in phenol resin

WERNEERS

pressed shets of poplar wood, new or recycled

PRESSING

once - the surface is not smooth twice - the surface is smooth, high-quality

BLACK COATING

with a weight of 170g/m2 hot pressed soaked in phenol resin

37

SET 100m2: P70 SCAFFOLDING THE SET INCLUDES: NAME

QTY.

BOTTOM BRACING CLAMP

2

ALU PLYWOOD PLATFORM WITH A SURFACE AND LADDER 3.00M P70

1

WOODEN PLATFORM 3.00M P70

14

HANDRAIL 3.00M P70

16

STEEL FRAME 2,00X0,70M P70

9

RAIL POST WITH PROTECTION 1,00X0,70M P70

9

DIAGONAL BRACING 3.00M P70

2

BASE PLATE Ø38 0.50M

18

EYE BOLT 280

3

SWIVEL COUPLER 48/48

3

ANCHOR 0.50M

3

Scaffolding P70 (Plettac type) - Set of 100m2 Working height - approx. 4.4m Length of the set - 24m Area - approx. 104m2.

P70 scaffold (of the Plettac type) is an exceptionally economical solution for various types of construction and assembly works. It performs perfectly in many areas and has a wide range of applications. It is one of the most frequently used scaffoldings in Europe.

With the P70 scaffolding system, different types of buildings, even those with complex geometries, can be quickly and safely enclosed. It is a highly productive system where one worker can erect up to 250 m2 of space in a day, which directly contributes to significant savings in construction costs.

An important element of P70 scaffolding is a very high level of safety thanks to self-locking mandrels and protection of platforms against spontaneous dislodging.

P70 scaffolding is made of hot-dip galvanised steel, which guarantees a long service life, and it can be customised with a choice of aluminium, steel or wood. P70 scaffolds are characterised by low weight, which makes them very easy to transport and store.

38

DOUBLE COUPLER 48/48

SWIVEL COUPLER 48/48

The connector is used to connect scaffolding pipes at right angles, crosswise fixed to the scaffolding.

Forged connector, to connect scaffolding pipes at different angles. Galvanised.

Name

Weight (kg)

Name

Weight (kg)

Double coupler 48/48

1,20

Swivel Coupler

1,20

BASE PLATE

ANCHOR

With 150 x 150 base with threaded pipe shank (double-coiled, trapezoidal or round). To compensate for small unevenness in the ground, feet of different lengths are available.

Anchoring must be anchored to the building in a manner that is resistant to compression and tension.

Name

Weight (kg)

Name

Weight (kg)

Anchor 0,30m

1,00

Base plate Ø38 0,30m

2,40

Anchor 0,40m

1,40

Base plate Ø38 0,40m

2,60

Anchor 0,50m

1,60

Base plate Ø38 0,50m

2,80

Anchor 0,60m

1,80

Base plate Ø38 0,60m

3,60

Anchor 1,00m

3,20

Anchor 1,20m

3,60

Anchor 1,30m

4,58

39

CONTACT US

This is for informational purposes only and does not constitute an offer, nor does it represent current stock levels.

BAUKRANE Budownictwo Sp. z o.o. Sp. k.

Headquarter: ul. Jana Keplera 36, 80-299 Gdansk, Poland, NIP / VAT EU PL5842659127