Banker Wire Architectural Wire Mesh Catalog

C.I. Banker Wire + Iron Works 600 Perkins Drive Mukwonago, WI 53149 USA Toll Free: 800-523-6772 Telephone: 262-363-6120 Fax: 262-363-9792 www.bankerwire.com sales@bankerwire.com

YOUR WIRE MESH AUTHORITY

2012a Edition

YOUR WIRE MESH AUTHORITY

Thank you for your interest in Banker Wire.

We invite you to browse through this catalog, which includes some of our most popular specifications. Most importantly, we want you to know that there is a lot more to Banker Wire than can be printed in our catalog.

We can weave high quality, distinctive architectural mesh that is perfectly tailored to your project needs.

With a little background information on types of metal, wire diameter, pitch and crimping, you can easily communicate with us on exactly what you need to make your mesh installation work perfectly with the rest of your design. Whether you are looking for a simple or custom design, large or small, we appreciate the opportunity to be a part of your next project!

The process of mesh selection begins by establishing type of alloy, wire diameter, spacing and crimp style.

With combinations that are truly infinite, custom woven wire is surprisingly affordable. Banker Wire has nearly 1,000 sets of crimping tools ready to create the right material for your project. Stiffness, texture, reflectivity, aspect ratio, scale, and pattern are all characteristics that can be engineered into the mesh quite easily with Banker Wire’s ready to use tooling. For the most demanding and creative projects, new tooling is produced on site and only takes 36 hours from design to production.

TYPE OF Alloy

SECONDARY FINISH

Architectural wire mesh fabrics can be produced at Banker Wire using a wide variety of raw materials that suit all specifications, budgets, and design goals.

The most common materials are 300 series stainless steels.

Banker Wire manufactures most products in mill finish condition. To better serve our customers, we have researched a number of secondary finishes that work well with woven and welded wire mesh for both interior and exterior architectural applications. We can assist in the early design stage by identifying appropriate raw materials and establishing a specification that will produce the desired final finish.

304 – the most basic stainless steel recommended for interior applications 316 – recommended for exterior applications that require resistance to

acids and salts Carbon steel, pre-galvanized steel, aluminum, and copper based alloys (bronze, brass, copper) are among the many alternatives that are readily available at Banker Wire. We can also combine alloys to create unique pieces with color and textural variety.

Stainless / Bronze

Stainless / Copper

Stainless / Brass

When appropriate, Banker Wire can provide the specified finish and deliver the fabricated materials ready to install. Typical finishes applied to wire mesh to achieve corrosion resistance, color, and reflectivity desired include powder coat, black oxide, anodizing, plating, pickling, and many other copper based alloy finishes. Please call us to discuss your next project design goals.

Powder Coated

Anodized

Plated

WIRE DIAMETER

PITCH

Banker Wire weaves wire diameters from 0.035” to 0.375”. Most traditional wire cloth specifications use identical wire diameters in both the warp and fill directions. However, many architectural patterns are created using combinations of wire diameters within a single piece of wire cloth. This results in subtle changes in the wire fabric’s overall appearance. It also emphasizes texture or direction of the weave, bringing more attention to the vertical or horizontal lines as desired.

Wire or pattern spacing is referred to as “pitch,” a measurement from the centerline of one wire to the centerline of the next, or from the start of one full pattern segment to the beginning of the next (“repeat”). The aspect ratio of the mesh is calculated based on these measurements and can be a design criteria when choosing a mesh pattern. Due to the versatility of Banker Wire’s woven wire products, a pattern can be scaled up or down to suit its intended design function.

2 to 1 aspect ratio

4 to 1 aspect ratio

6 to 1 aspect ratio

CRIMPING The wire crimping process is critical in producing consistent, top quality woven wire mesh. Banker Wire continues to be the innovative force in architectural wire mesh manufacturing by exploring new ways of crimping and weaving wire. The eight fundamental crimp styles are plain, lock, intercrimp, flat top, triple shoot, faux cable, helix and twill. These styles are building blocks and can be combined and modified to produce endless compositions of texture and reflectivity.

Plain - PL Plain crimp is a simple zig zag style of crimping where warp and fill wires intersect at every available pocket. With Pre-Crimped material, the Plain Crimp is most common when Mesh to Diameter (MD) Ratios are 4:1 or less. This un-tooled look produces a smooth and subtle pattern. Our designation for this crimp style is PL. Lock Crimp - LC Lock Crimp is a more modern and very versatile crimp style that has been largely overlooked for architectural applications. Unlike Plain Crimp, Lock Crimp is characterized by straight sections of wire connected by a well defined ‘bump’ at the wire intersections. Lock Crimp yields material with superb dimensional stability and has a clean look that many designers find visually appealing. Lock Crimp works well at practically any MD ratio of 4:1 and greater.

Our designation for this crimp style is LC.

Plain - PL

Lock Crimp - LC

Flat Top - FT Flat top is really a modified version of Lock Crimp, except that all the crimping is offset to one side of the material. The result is that the top surface of Flat Top presents a smooth surface with all the wire surfaces in a single plane. The bottom side has crimp bumps approximately twice the height of Lock Crimp bumps.

Originally developed to present a smooth surface to material flow, or as a backer screen for finer mesh, Flat Top is also used extensively in architectural applications.

Our designation for this crimp style is FT. Intercrimp - I3, I5, I7, etc While not really a fundamental crimp style, we choose to list it with the other crimp styles because of its widespread use. Intercrimp is simply Plain Crimp except that wire intersections occur only at every 3rd, 5th, 7th intersection, etc. This type of weave is practical only at MD ratios of 6:1 or more, and is best suited for ratios of 8:1 or more. We designate this style of weave as I3, I5, I7, etc. Our designation for this crimp style is I#.

Flat Top - FT

Intercrimp - I3, I5, I7, etc

CRIMPING cont.

Faux Cable - PS Faux Cable is a variant of the triple shoot crimp style, but instead of having the clusters of three closely spaced wires separated by a small space, Faux Cable has its clusters of wires (generally 2, 3 or 4) spaced tightly together with no gaps between adjacent wires. While some manufacturers produce this style of material by simply pressing groups of wires together, Banker Wire places special crimps in the surface of the wire. This technique assures absolute repeatability in the mesh spacing and eliminates any problems associated with cumulative pitch variation. Cumulative pitch variation can result in aesthetic problems when attempting to align multiple panels. Our designation for this crimp style is PS.

FAUX CABLE - PS

Triple ShUtE - TS

Triple ShUtE - TS Triple Shute is a specialty crimp style that is generally used in conjunction with another crimp style. It consists of relatively long sections of straight wire connected by groupings of three Plain Crimp pockets. The resulting material has rectangular openings of very high aspect ratio. Developed originally as a non-blinding sizing product, it also has interesting architectural properties.

Our designation for this crimp style is TS.

HELIX - HX The helix is a new crimp style with enormous design potential. For years, the wire mesh industry has been limited to making squares, rectangles, and diamonds.

Banker Wire introduces a design that represents a whole new category of wire mesh construction. Naturally flowing circular shaped openings are created when intersecting the helical wires. The smooth lines created by the spiral shaped wires give this mesh a soft and tranquil look and feel. The helix can also be combined with any other fundamental crimp style, creating a truly unique woven wire mesh pattern. Our designation for this crimp style is HX. TWILL - TW Exploring further into traditional weave styles, Banker Wire refines the classic twill style weave for architectural purposes. Traditionally, the twill style weave allows for a tighter mesh to diameter ratio which reduces the need to form the wire beyond its physical limitations. Four independent heddle frames on the loom allow for complex wire positioning that create a number of parallel diagonal pattern configurations. Pre-crimping a twill style mesh allows complete control of the unique visual detail, emphasizing the herringbone pattern in a large scale woven wire mesh. Our designation for this crimp style is TW.

HELIX - HX

TWILL - TW

SUSTAINABILITY As a manufacturer of woven metal wire mesh fabrics, we use very little energy. The process is entirely cold-forming, using machines with the latest variable speed technology. Our plant and offices are illuminated with natural daylight and energy efficient fluorescent lighting. The various wire alloys used in our woven and welded wire mesh products contain high level percentages of pre-consumer and post-consumer scrap. With Steel being the most efficient and commonly recycled material, percentages average 80-85% post-consumer and 13-18% pre-consumer content. The average recycled content of Stainless Steel wire used at Banker Wire is 90%, with 80% of that being postconsumer and 20% being pre-consumer content.

Banker Wire’s products can help earn LEED certification by contributing to the following credits in LEED 2009 for New Construction and Major Renovation: SS 8 – Light Pollution Reduction. Banker Wire mesh can help filter the effects of lighting at night. Mesh screens are particularly useful when used as shading devices for facilities that operate 24 hours a day, such as parking garages and factories.

EA 1 – Optimize Energy Performance. Banker Wire mesh can be used as a sunshade on building facades, thus decreasing the amount of air conditioning required to cool spaces.

Less than 5% of the wire we use becomes scrap, and it is completely recycled through protocol integrated into our production process.

This guarantees our scrap metal is handled in a manner that respects the environment.

MR 4 – Recycled Content. The post-consumer and pre-consumer recycled content of Banker Wire mesh helps contribute to securing this credit.

Honda’s search for an advanced and futuristic appearance for its new Solar Hydrogen Station lead them to Banker Wire, who was able to accommodate with their DS-5 wire mesh. For more information about the Solar Hydrogen Station visit world.honda.com.

MR 5 – Regional Materials. Banker Wire is located in Mukwonago, Wisconsin, which is within a 500 mile radius of such cities as Chicago, Toronto, Pittsburgh, St. Louis, Detroit, Cleveland, Nashville and Minneapolis/St. Paul. Specifying Banker Wire products for a project within the 500 mile radius will contribute towards the Regional Materials credit.

LARGE

FPZ-16 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

La rge 6 6 . 5% 1 . 85 l bs/sq f t FTPLZ

MAXIMUM “A” DIMENSION

24 0 i n c h es

MAXIMUM “B” DIMENSION

1 20 i n c h es

OPENING LIMITATION** OVERALL THICKNESS ASPECT RATIO AVAILABLE ALLOYS

0.42 i n c h es 0. 285 i n c h es 3. 33 : 1 Stainless, Mild Steel, Aluminum, Bronze, Brass, Copper, Pre-Galv, Galfan

I-188 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

La rge 79. 6% 0.989 l bs/sq f t I3I3

MAXIMUM “A” DIMENSION

1 20 0 i n c h es

MAXIMUM “B” DIMENSION

1 20 i n c h es

OPENING LIMITATION** OVERALL THICKNESS ASPECT RATIO AVAILABLE ALLOYS

1 .1 i n c h es 0. 27 i n c h es 1 .0 0 : 1 Stainless, Mild Steel, Aluminum, Bronze, Brass, Copper, Pre-Galv, Galfan

L-62 MESH CATEGORY

La rge

PERCENT OPEN AREA

81 .7%

WEIGHT CRIMP STYLE*

1 . 20 l bs/sq f t LC LC

MAXIMUM “A” DIMENSION

24 0 i n c h es

MAXIMUM “B” DIMENSION

1 20 i n c h es

OPENING LIMITATION**

1 . 81 i n c h es

OVERALL THICKNESS ASPECT RATIO AVAILABLE ALLOYS

0. 38 0 i n c h es 1 .0 0 : 1 Stainless, Mild Steel, Aluminum, Bronze, Brass, Copper, Pre-Galv, Galfan

LZ-55 MESH CATEGORY

La rge

PERCENT OPEN AREA

81 . 3%

WEIGHT CRIMP STYLE*

1 .0 4 0 l bs/sq f t LC LCZ

MAXIMUM “A” DIMENSION

24 0 i n c h es

MAXIMUM “B” DIMENSION

1 20 i n c h es

OPENING LIMITATION**

1 . 25 0 i n c h es

OVERALL THICKNESS

0. 324 i n c h es

ASPECT RATIO AVAILABLE ALLOYS

1 . 62 : 1 Stainless, Mild Steel, Aluminum, Bronze, Brass, Copper, Pre-Galv, Galfan

M13Z-7 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

La rge 76 .9 % 1 . 30 l bs/sq f t PS 3 I Z

MAXIMUM “A” DIMENSION

24 0 i n c h es

MAXIMUM “B” DIMENSION

1 20 i n c h es

OPENING LIMITATION**

1 .0 42 i n c h es

OVERALL THICKNESS

0. 375 i n c h es

ASPECT RATIO AVAILABLE ALLOYS

3. 25 : 1 Stainless, Mild Steel, Aluminum, Bronze, Brass, Copper, Pre-Galv, Galfan

M13Z-145 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

La rge 6 4. 5% 1 .75 l bs/sq f t PS 3 PZ

MAXIMUM “A” DIMENSION

24 0 i n c h es

MAXIMUM “B” DIMENSION

1 20 i n c h es

OPENING LIMITATION** OVERALL THICKNESS ASPECT RATIO AVAILABLE ALLOYS

0.47 1 i n c h es 0. 365 i n c h es 7.0 1 : 1 Stainless, Mild Steel, Aluminum, Bronze, Brass, Copper, Pre-Galv, Galfan

M13Z-146 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

La rge 74. 8% 1 . 23 l bs/sq f t TS LCZ

MAXIMUM “A” DIMENSION

24 0 i n c h es

MAXIMUM “B” DIMENSION

1 20 i n c h es

OPENING LIMITATION**

0. 8 65 i n c h es

OVERALL THICKNESS

0.4 0 5 i n c h es

ASPECT RATIO AVAILABLE ALLOYS

3.0 0 : 1 Stainless, Mild Steel, Aluminum, Bronze, Brass, Copper, Pre-Galv, Galfan

M13Z-345 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

L a rg e 59. 8% 1 . 623 l bs/sq f t TS P L Z

MAXIMUM “A” DIMENSION

24 0 i n c h es

MAXIMUM “B” DIMENSION

1 20 i n c h es

OPENING LIMITATION**

0. 255 i n c h es

OVERALL THICKNESS

0. 36 0 i n c h es

ASPECT RATIO AVAILABLE ALLOYS

8 .42 : 1 Stainless, Mild Steel, Aluminum, Bronze, Brass, Copper, Pre-Galv, Galfan

M22-8 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

La rge 77. 2 % 1 . 330 l bs/sq f t 2P2P

MAXIMUM “A” DIMENSION

24 0 i n c h es

MAXIMUM “B” DIMENSION

1 20 i n c h es

OPENING LIMITATION**

1 . 8 4 0 i n c h es

OVERALL THICKNESS

0. 324 i n c h es

ASPECT RATIO AVAILABLE ALLOYS

1 .0 0 : 1 Stainless, Mild Steel, Aluminum, Bronze, Brass, Copper, Pre-Galv, Galfan

M22-27 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

La rge 75% 1 .4 0 l bs/sq f t 2L2L

MAXIMUM “A” DIMENSION

24 0 i n c h es

MAXIMUM “B” DIMENSION

1 20 i n c h es

OPENING LIMITATION** OVERALL THICKNESS ASPECT RATIO AVAILABLE ALLOYS

1 .925 i n c h es 0. 324 i n c h es 1 .0 0 : 1 Stainless, Mild Steel, Aluminum, Bronze, Brass, Copper, Pre-Galv, Galfan

M22-38 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

La rge 5 6 . 30 % 1 .98 l bs/sq f t 2E2E

MAXIMUM “A” DIMENSION

24 0 i n c h es

MAXIMUM “B” DIMENSION

1 20 i n c h es

OPENING LIMITATION** OVERALL THICKNESS ASPECT RATIO AVAILABLE ALLOYS

1 .1 25 i n c h es 0.1 20 i n c h es 1 .0 0 : 1 Sta i n l ess, M i l d Ste e l , B ro n ze

M33-5 MESH CATEGORY

La rge

PERCENT OPEN AREA

37.1 %

WEIGHT CRIMP STYLE*

1 .41 l bs/sq f t 3E3E

MAXIMUM “A” DIMENSION

1 20 i n c h es

MAXIMUM “B” DIMENSION

72 i n c h es

OPENING LIMITATION** OVERALL THICKNESS ASPECT RATIO AVAILABLE ALLOYS

1 .0 0 i n c h es 0.0 95 i n c h es 1 .0 0 : 1 Sta i n l ess, M i l d Ste e l , B ro n ze

M44-2 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

La rge 77.4% 1 .0 4 l bs/sq f t 4L4L

MAXIMUM “A” DIMENSION

24 0 i n c h es

MAXIMUM “B” DIMENSION

1 20 i n c h es

OPENING LIMITATION** OVERALL THICKNESS ASPECT RATIO AVAILABLE ALLOYS

2 .1 0 i n c h es 0. 255 i n c h es 1 .0 0 : 1 Stainless, Mild Steel, Aluminum, Bronze, Brass, Copper, Pre-Galv, Galfan

S-15 MESH CATEGORY

La rge

PERCENT OPEN AREA

51 .1 %

WEIGHT CRIMP STYLE*

1 . 5 0 l bs/sq f t E3E3

MAXIMUM “A” DIMENSION

24 0 i n c h es

MAXIMUM “B” DIMENSION

1 20 i n c h es

OPENING LIMITATION**

0.96 3 i n c h es

OVERALL THICKNESS

0.1 5 0 i n c h es

ASPECT RATIO AVAILABLE ALLOYS

1 .0 0 : 1 Sta i n l ess, B ro n ze

SJD-3 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

La rge 85. 3% 0.9 9 l bs/sq f t SJD

MAXIMUM “A” DIMENSION

24 0 i n c h es

MAXIMUM “B” DIMENSION

1 20 i n c h es

OPENING LIMITATION** OVERALL THICKNESS ASPECT RATIO AVAILABLE ALLOYS

1 . 8 8 i n c h es 0. 5 0 0 i n c h es 1 .0 0 : 1 Sta i n l ess, M i l d Ste e l , P re - G a l v

SJD-4 MESH CATEGORY

La rge

PERCENT OPEN AREA

Pe r D es i g n

WEIGHT

Pe r D es i g n

CRIMP STYLE*

SJD

MAXIMUM “A” DIMENSION

24 0 i n c h es

MAXIMUM “B” DIMENSION

1 20 i n c h es

OPENING LIMITATION**

Pe r D es i g n

OVERALL THICKNESS

Pe r D es i g n

ASPECT RATIO

Pe r D es i g n

AVAILABLE ALLOYS

Stainless, Mild Steel, Aluminum, Bronze, Brass, Copper, Pre-Galv, Galfan

MID-FILL

F-48 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

Mid-Fill 70. 2 % 1 .702 l bs/sq f t FTFT

MAXIMUM “A” DIMENSION

24 0 i n c h es

MAXIMUM “B” DIMENSION

1 20 i n c h es

OPENING LIMITATION**

0. 838 i n c h es

OVERALL THICKNESS

0. 295 i n c h es

ASPECT RATIO AVAILABLE ALLOYS

1 .0 0 : 1 Stainless, Mild Steel, Aluminum, Bronze, Brass, Copper, Pre-Galv, Galfan

F-83 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

Mid-Fill 74% 0.95 l bs/sq f t FTFT

MAXIMUM “A” DIMENSION

24 0 i n c h es

MAXIMUM “B” DIMENSION

1 20 i n c h es

OPENING LIMITATION**

0. 6 45 i n c h es

OVERALL THICKNESS

0.1 8 0 i n c h es

ASPECT RATIO AVAILABLE ALLOYS

1 .0 0 : 1 Stainless, Mild Steel, Aluminum, Bronze, Brass, Copper, Pre-Galv, Galfan

FPZ-46 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

Mid-Fill 6 4.0 % 1 . 3 4 l bs/sq f t FTPLZ

MAXIMUM “A” DIMENSION

24 0 i n c h es

MAXIMUM “B” DIMENSION

1 20 i n c h es

OPENING LIMITATION**

0. 2 1 3 i n c h es

OVERALL THICKNESS

0. 2 1 5 i n c h es

ASPECT RATIO AVAILABLE ALLOYS

3.0 0 : 1 Sta i n l ess, B ro n ze, B ra ss, Co p p e r, P re - G a l v

L-81 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

Mid-Fill 77.4% 0.928 l bs/sq f t LC LC

MAXIMUM “A” DIMENSION

1 8 0 0 i n c h es

MAXIMUM “B” DIMENSION

1 20 i n c h es

OPENING LIMITATION**

0. 8 8 0 i n c h es

OVERALL THICKNESS

0. 24 0 i n c h es

ASPECT RATIO AVAILABLE ALLOYS

1 .0 0 : 1 Stainless, Mild Steel, Aluminum, Bronze, Brass, Copper, Pre-Galv, Galfan

LPZ-28 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

Mid-Fill 58 . 5% 1 .4 0 l bs/sq f t LC P L Z

MAXIMUM “A” DIMENSION

24 0 i n c h es

MAXIMUM “B” DIMENSION

1 20 i n c h es

OPENING LIMITATION**

0.1 70 i n c h es

OVERALL THICKNESS

0.1 85 i n c h es

ASPECT RATIO AVAILABLE ALLOYS

3.0 0 : 1 Sta i n l ess, M i l d Ste e l , A l u m i n u m , B ro n ze, B ra ss, Co p p e r, P re - G a l v

M12Z-17 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

Mid-Fill 61 .7% 2 .1 2 l bs/sq f t PS 2 PZ

MAXIMUM “A” DIMENSION

24 0 i n c h es

MAXIMUM “B” DIMENSION

1 20 i n c h es

OPENING LIMITATION** OVERALL THICKNESS ASPECT RATIO AVAILABLE ALLOYS

0.47 1 i n c h es 0. 39 0 i n c h es 2 . 67 : 1 Stainless, Mild Steel, Aluminum, Bronze, Brass, Copper, Pre-Galv, Galfan

M13Z-179 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

Mid-Fill 62 .9 % 1 . 65 0 l bs/sq f t PS 3 PZ

MAXIMUM “A” DIMENSION

24 0 i n c h es

MAXIMUM “B” DIMENSION

1 20 i n c h es

OPENING LIMITATION**

0. 25 0 i n c h es

OVERALL THICKNESS

0. 30 4 i n c h es

ASPECT RATIO AVAILABLE ALLOYS

8 .1 6 : 1 Sta i n l ess, M i l d Ste e l , A l u m i n u m , B ro n ze, B ra ss, Co p p e r, P re - G a l v

M13Z-187 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

Mid-Fill 42 . 3% 2 .4 0 l bs/sq f t PS 3 PZ

MAXIMUM “A” DIMENSION

24 0 i n c h es

MAXIMUM “B” DIMENSION

1 20 i n c h es

OPENING LIMITATION** OVERALL THICKNESS ASPECT RATIO AVAILABLE ALLOYS

0.1 31 i n c h es 0. 29 0 i n c h es 8 . 33 : 1 Sta i n l ess, B ro n ze

M22-22 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

Mid-Fill 61 % 1 .0 0 l bs/sq f t 2F2F

MAXIMUM “A” DIMENSION

24 0 i n c h es

MAXIMUM “B” DIMENSION

1 20 i n c h es

OPENING LIMITATION** OVERALL THICKNESS ASPECT RATIO AVAILABLE ALLOYS

0. 5 0 i n c h es 0.1 30 i n c h es 1 .0 0 : 1 Sta i n l ess, M i l d Ste e l , B ro n ze, P re - G a l v

M22-37 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

Mid-Fill 66.2% 1 . 30 l bs/sq f t 2L2L

MAXIMUM “A” DIMENSION

24 0 i n c h es

MAXIMUM “B” DIMENSION

1 20 i n c h es

OPENING LIMITATION**

0.725 i n c h es

OVERALL THICKNESS

0. 2 1 0 i n c h es

ASPECT RATIO AVAILABLE ALLOYS

1 .0 0 : 1 Stainless, Mild Steel, Aluminum, Bronze, Brass, Copper, Pre-Galv, Galfan

M22-43 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

Mid-Fill 4 6 . 3% 2 .0 0 l bs/sq f t 2E2E

MAXIMUM “A” DIMENSION

1 20 i n c h es

MAXIMUM “B” DIMENSION

72 i n c h es

OPENING LIMITATION** OVERALL THICKNESS ASPECT RATIO AVAILABLE ALLOYS

0. 3 45 i n c h es 0.1 5 0 i n c h es 1 .0 0 : 1 Sta i n l ess, B ro n ze

M22-80 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

Mid-Fill 52 % 1 .9 0 l bs/sq f t 2H2H

MAXIMUM “A” DIMENSION

24 0 i n c h es

MAXIMUM “B” DIMENSION

1 20 i n c h es

OPENING LIMITATION** OVERALL THICKNESS ASPECT RATIO AVAILABLE ALLOYS

0. 65 i n c h es 0. 2 1 0 i n c h es 1 .0 0 : 1 Sta i n l ess, M i l d Ste e l , B ro n ze, Co p p e r, B ra ss, P re - G a l v

M22-83 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

Mid-Fill 41 .4% 1 .70 l bs/sq f t 2H2H

MAXIMUM “A” DIMENSION

24 0 i n c h es

MAXIMUM “B” DIMENSION

72 i n c h es

OPENING LIMITATION**

0.425 i n c h es

OVERALL THICKNESS

0.1 6 0 i n c h es

ASPECT RATIO AVAILABLE ALLOYS

1 .0 0 : 1 Sta i n l ess, M i l d Ste e l , B ro n ze, Co p p e r, B ra ss, P re - G a l v

M33-2 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

Mid-Fill 9. 20 % 3. 5 0 l bs/sq f t 3E3E

MAXIMUM “A” DIMENSION

24 0 i n c h es

MAXIMUM “B” DIMENSION

1 20 i n c h es

OPENING LIMITATION**

0.1 35 i n c h es

OVERALL THICKNESS

0.1 25 i n c h es

ASPECT RATIO AVAILABLE ALLOYS

1 .0 0 : 1 Sta i n l ess, B ro n ze, B ra ss, Co p p e r

M44-7 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

Mid-Fill 3 4.0 % 1 . 8 8 l bs/sq f t 4E4E

MAXIMUM “A” DIMENSION

1 20 i n c h es

MAXIMUM “B” DIMENSION

72 i n c h es

OPENING LIMITATION** OVERALL THICKNESS ASPECT RATIO AVAILABLE ALLOYS

0. 285 i n c h es 0.1 20 i n c h es 1 .0 0 : 1 Sta i n l ess, B ro n ze, B ra ss

P-278 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

Mid-Fill 70.1 % 1 .70 l bs/sq f t PLPL

MAXIMUM “A” DIMENSION

24 0 i n c h es

MAXIMUM “B” DIMENSION

1 20 i n c h es

OPENING LIMITATION**

0. 838 i n c h es

OVERALL THICKNESS

0. 320 i n c h es

ASPECT RATIO AVAILABLE ALLOYS

1 .0 0 : 1 Sta i n l ess, B ro n ze

PZ-11 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

Mid-Fill 51 .0 % 1 . 38 l bs/sq f t PLPLZ

MAXIMUM “A” DIMENSION

24 0 i n c h es

MAXIMUM “B” DIMENSION

1 20 i n c h es

OPENING LIMITATION**

0.1 07 i n c h es

OVERALL THICKNESS

0.1 6 0 i n c h es

ASPECT RATIO AVAILABLE ALLOYS

4.0 0 : 1 Sta i n l ess

S-4 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

Mid-Fill 36 .9 % 2 .94 l bs/sq f t E1E1

MAXIMUM “A” DIMENSION

24 0 i n c h es

MAXIMUM “B” DIMENSION

1 20 i n c h es

OPENING LIMITATION**

0. 2 1 0 i n c h es

OVERALL THICKNESS

0.1 5 6 i n c h es

ASPECT RATIO AVAILABLE ALLOYS

1 .0 0 : 1 Sta i n l ess

S-9 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

Mid-Fill 6 3.4% 1 . 25 l bs/sq f t E3E3

MAXIMUM “A” DIMENSION

24 0 i n c h es

MAXIMUM “B” DIMENSION

1 20 i n c h es

OPENING LIMITATION**

0.495 i n c h es

OVERALL THICKNESS

0.1 4 0 i n c h es

ASPECT RATIO AVAILABLE ALLOYS

1 .0 0 : 1 Sta i n l ess, A l u m i n u m , B ro n ze, B ra ss, Co p p e r

S-13 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

Mid-Fill 6 . 6% 3. 67 l bs/sq f t ELEL

MAXIMUM “A” DIMENSION

24 0 i n c h es

MAXIMUM “B” DIMENSION

1 20 i n c h es

OPENING LIMITATION**

0.1 25 i n c h es

OVERALL THICKNESS

0.1 25 i n c h es

ASPECT RATIO AVAILABLE ALLOYS

1 .0 0 : 1 Sta i n l ess, B ro n ze

S-14 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

Mid-Fill 24. 8% 2 .45 l bs/sq f t ELEL

MAXIMUM “A” DIMENSION

24 0 i n c h es

MAXIMUM “B” DIMENSION

72 i n c h es

OPENING LIMITATION**

0. 375 i n c h es

OVERALL THICKNESS

0.1 20 i n c h es

ASPECT RATIO AVAILABLE ALLOYS

1 .0 0 : 1 Sta i n l ess, M i l d Ste e l , B ro n ze

S-18 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

Mid-Fill 25% 1 .70 l bs/sq f t E1E1

MAXIMUM “A” DIMENSION

24 0 i n c h es

MAXIMUM “B” DIMENSION

72 i n c h es

OPENING LIMITATION**

0. 30 i n c h es

OVERALL THICKNESS

0.0 8 i n c h es

ASPECT RATIO AVAILABLE ALLOYS

1 .0 0 : 1 Sta i n l ess, B ro n ze

SJD-5 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

Mid-Fill 61 . 2 % 1 . 20 l bs/sq f t SJD

MAXIMUM “A” DIMENSION

24 0 i n c h es

MAXIMUM “B” DIMENSION

72 i n c h es

OPENING LIMITATION** OVERALL THICKNESS ASPECT RATIO AVAILABLE ALLOYS

0. 65 i n c h es 0.1 6 i n c h es 1 .47 : 1 Sta i n l ess

SJD-6 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

Mid-Fill 6 0. 2 % 1 .4 0 l bs/sq f t SJD

MAXIMUM “A” DIMENSION

24 0 i n c h es

MAXIMUM “B” DIMENSION

1 20 i n c h es

OPENING LIMITATION**

0.45 i n c h es

OVERALL THICKNESS

0.1 75 i n c h es

ASPECT RATIO AVAILABLE ALLOYS

1 .1 8 : 1 Sta i n l ess, B ro n ze

SZ-2 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

Mid-Fill 30.0 % 2 . 23 l bs/sq f t E1PLZ

MAXIMUM “A” DIMENSION

24 0 i n c h es

MAXIMUM “B” DIMENSION

78 i n c h es

OPENING LIMITATION**

0.1 0 0 i n c h es

OVERALL THICKNESS

0.1 98 i n c h es

ASPECT RATIO AVAILABLE ALLOYS

3.92 : 1 Sta i n l ess

TW-1 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

Mid-Fill 27. 8 % 2 . 27 l bs/sq f t TWTW

MAXIMUM “A” DIMENSION

1 20 i n c h es

MAXIMUM “B” DIMENSION

72 i n c h es

OPENING LIMITATION**

0.1 5 6 i n c h es

OVERALL THICKNESS

0.1 30 i n c h es

ASPECT RATIO AVAILABLE ALLOYS

1 .0 0 : 1 Sta i n l ess, B ro n ze

FINE

3DZ-151 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

Fi ne 32 . 5% 1 . 57 l bs/sq f t 3 DZ

MAXIMUM “A” DIMENSION

1 20 i n c h es

MAXIMUM “B” DIMENSION

72 i n c h es

OPENING LIMITATION** OVERALL THICKNESS ASPECT RATIO AVAILABLE ALLOYS

0.0 5 0 i n c h es 0.1 6 0 i n c h es 7.0 0 : 1 Sta i n l ess, B ro n ze

FPZ-20 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

Fi ne 39.9 % 0.96 4 l bs/sq f t FTPLZ

MAXIMUM “A” DIMENSION

1 20 i n c h es

MAXIMUM “B” DIMENSION

72 i n c h es

OPENING LIMITATION** OVERALL THICKNESS ASPECT RATIO AVAILABLE ALLOYS

0.0 42 i n c h es 0.1 02 i n c h es 2 .4 0 : 1 Sta i n l ess

IPZ-25 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

Fi ne 53.9 % 0. 8 4 0 l bs/sq f t I 3 P L Z

MAXIMUM “A” DIMENSION

1 20 0 i n c h es

MAXIMUM “B” DIMENSION

96 i n c h es

OPENING LIMITATION**

0.0 6 0 i n c h es

OVERALL THICKNESS

0.0 98 i n c h es

ASPECT RATIO AVAILABLE ALLOYS

2 . 51 : 1 Sta i n l ess, B ro n ze, B ra ss, Co p p e r

IPZ-33 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

Fi ne 6 8 .0 % 0.72 l bs/sq f t I5PLZ

MAXIMUM “A” DIMENSION

1 20 0 i n c h es

MAXIMUM “B” DIMENSION

1 20 i n c h es

OPENING LIMITATION**

0.1 8 8 i n c h es

OVERALL THICKNESS

0.1 47 i n c h es

ASPECT RATIO AVAILABLE ALLOYS

2 . 55 : 1 Sta i n l ess, M i l d Ste e l , B ro n ze, B ra ss, Co p p e r, P re - G a l v

L-441 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

Fi ne 70. 6% 0. 83 l bs/sq f t LC LC

MAXIMUM “A” DIMENSION

1 8 0 0 i n c h es

MAXIMUM “B” DIMENSION

1 20 i n c h es

OPENING LIMITATION** OVERALL THICKNESS ASPECT RATIO AVAILABLE ALLOYS

0.42 i n c h es 0.1 6 i n c h es 1 .0 0 : 1 Sta i n l ess, M i l d Ste e l , A l u m i n u m , B ro n ze, B ra ss, Co p p e r, P re - G a l v

LP-20 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

Fi ne 55.9 % 0. 6 65 l bs/sq f t LC P L

MAXIMUM “A” DIMENSION

1 20 i n c h es

MAXIMUM “B” DIMENSION

72 i n c h es

OPENING LIMITATION** OVERALL THICKNESS ASPECT RATIO AVAILABLE ALLOYS

0.1 26 i n c h es 0.0 85 i n c h es 1 .0 0 : 1 Sta i n l ess, B ro n ze, B ra ss, Co p p e r

LPZ-71 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

Fi ne 4 4.0 % 1 . 3 47 l bs/sq f t LC P L Z

MAXIMUM “A” DIMENSION

24 0 i n c h es

MAXIMUM “B” DIMENSION

1 20 i n c h es

OPENING LIMITATION**

0.07 1 i n c h es

OVERALL THICKNESS

0.1 26 i n c h es

ASPECT RATIO AVAILABLE ALLOYS

2.80 : 1 Sta i n l ess, M i l d Ste e l , A l u m i n u m , B ro n ze, B ra ss, Co p p e r, P re - G a l v

M12Z-16 MESH CATEGORY

Fi ne

PERCENT OPEN AREA

39 %

WEIGHT CRIMP STYLE*

1 . 674 l bs/sq f t F T 2 PZ

MAXIMUM “A” DIMENSION

1 20 0 i n c h es

MAXIMUM “B” DIMENSION

1 20 i n c h es

OPENING LIMITATION**

0.1 0 1 i n c h es

OVERALL THICKNESS

0.1 30 i n c h es

ASPECT RATIO AVAILABLE ALLOYS

1 . 85 : 1 Sta i n l ess, B ro n ze, B ra ss

M13Z-247 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

Fi ne 51 .0 % 1 .1 2 l bs/sq f t PS 3 PZ

MAXIMUM “A” DIMENSION

1 20 0 i n c h es

MAXIMUM “B” DIMENSION

1 20 i n c h es

OPENING LIMITATION**

0.1 26 i n c h es

OVERALL THICKNESS

0.1 35 i n c h es

ASPECT RATIO AVAILABLE ALLOYS

8 .47 : 1 Sta i n l ess

M13Z-293 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

Fi ne 4 3. 5% 1 .1 8 l bs/sq f t TS P L Z

MAXIMUM “A” DIMENSION

1 20 0 i n c h es

MAXIMUM “B” DIMENSION

1 20 i n c h es

OPENING LIMITATION**

0.07 1 i n c h es

OVERALL THICKNESS

0.1 1 2 i n c h es

ASPECT RATIO AVAILABLE ALLOYS

6 .0 0 : 1 Sta i n l ess, B ro n ze, B ra ss

M22-28 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

Fine 6 4. 5% 0. 85 l bs/sq f t 2P2P

MAXIMUM “A” DIMENSION

1 8 0 0 i n c h es

MAXIMUM “B” DIMENSION

1 20 i n c h es

OPENING LIMITATION**

0.41 7 i n c h es

OVERALL THICKNESS

0.1 38 i n c h es

ASPECT RATIO AVAILABLE ALLOYS

1 .0 0 : 1 Sta i n l ess, M i l d Ste e l , A l u m i n u m , B ro n ze, B ra ss, Co p p e r, P re - G a l v

P-97 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

Fi ne 45.0 % 1 .0 4 l bs/sq f t PLPL

MAXIMUM “A” DIMENSION

1 20 0 i n c h es

MAXIMUM “B” DIMENSION

72 i n c h es

OPENING LIMITATION** OVERALL THICKNESS ASPECT RATIO AVAILABLE ALLOYS

0.0 96 i n c h es 0.1 02 i n c h es 1 .0 0 : 1 Sta i n l ess

PZ-7 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

Fi ne 38 .0 % 1 . 22 l bs/sq f t PLPLZ

MAXIMUM “A” DIMENSION

1 20 i n c h es

MAXIMUM “B” DIMENSION

72 i n c h es

OPENING LIMITATION** OVERALL THICKNESS ASPECT RATIO AVAILABLE ALLOYS

0.0 5 6 i n c h es 0.1 25 i n c h es 2 .7 1 : 1 Sta i n l ess

S-12 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

Fi ne 2 1 . 6% 2 .0 5 l bs/sq f t E1E1

MAXIMUM “A” DIMENSION

1 20 i n c h es

MAXIMUM “B” DIMENSION

72 i n c h es

OPENING LIMITATION**

0.1 5 0 i n c h es

OVERALL THICKNESS

0.1 0 5 i n c h es

ASPECT RATIO AVAILABLE ALLOYS

1 .0 0 : 1 Sta i n l ess, M i l d Ste e l

S-16 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

Fi ne 25. 3% 1 .78 l bs/sq f t E1E1

MAXIMUM “A” DIMENSION

24 0 i n c h es

MAXIMUM “B” DIMENSION

72 i n c h es

OPENING LIMITATION** OVERALL THICKNESS ASPECT RATIO AVAILABLE ALLOYS

0.1 25 i n c h es 0.0 8 0 i n c h es 1 .0 0 : 1 B ro n ze, B ra ss, Co p p e r

S-32 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

Fi ne 25.0 % 1 . 30 l bs/sq f t E1E1

MAXIMUM “A” DIMENSION

1 4 4 i n c h es

MAXIMUM “B” DIMENSION

72 i n c h es

OPENING LIMITATION**

0.1 0 8 i n c h es

OVERALL THICKNESS

0.0 6 3 i n c h es

ASPECT RATIO AVAILABLE ALLOYS

1 .0 0 : 1 Sta i n l ess, B ro n ze, B ra ss

SZ-3 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

Fi ne 27. 3% 2 .49 l bs/sq f t E3E1Z

MAXIMUM “A” DIMENSION

1 20 0 i n c h es

MAXIMUM “B” DIMENSION

1 20 i n c h es

OPENING LIMITATION** OVERALL THICKNESS ASPECT RATIO AVAILABLE ALLOYS

0.0 95 i n c h es 0.1 30 i n c h es 3.0 0 : 1 Sta i n l ess, A l u m i n u m , B ro n ze, Co p p e r

SZ-4 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

Fi ne 41 .1 % 1 . 6 3 l bs/sq f t E1PLZ

MAXIMUM “A” DIMENSION

1 20 i n c h es

MAXIMUM “B” DIMENSION

72 i n c h es

OPENING LIMITATION**

0.1 5 6 i n c h es

OVERALL THICKNESS

0.1 4 0 i n c h es

ASPECT RATIO AVAILABLE ALLOYS

1 . 27 : 1 Sta i n l ess, B ro n ze, B ra ss, Co p p e r

OPAQUE

DF-1 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

O pa q u e 0.0 % 2 . 20 l bs/sq f t P D F TZ

MAXIMUM “A” DIMENSION

1 20 i n c h es

MAXIMUM “B” DIMENSION

72 i n c h es

OPENING LIMITATION** OVERALL THICKNESS ASPECT RATIO AVAILABLE ALLOYS

0.0 i n c h es 0.1 95 i n c h es 1 0.45 : 1 Sta i n l ess, B ro n ze

DF-6 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

O pa q u e (s p e c i a l ) 0.0 % (A rea o p e n s a t a n g l e) 2 . 30 l bs/sq f t P D F TZ

MAXIMUM “A” DIMENSION

1 20 i n c h es

MAXIMUM “B” DIMENSION

72 i n c h es

OPENING LIMITATION** OVERALL THICKNESS ASPECT RATIO AVAILABLE ALLOYS

0.0 58 i n c h es 0. 2 1 6 i n c h es 1 1 .0 8 : 1 Sta i n l ess

DF-8 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

O pa q u e 0.0 % 2 . 20 l bs/sq f t P D 4 FZ

MAXIMUM “A” DIMENSION

1 20 i n c h es

MAXIMUM “B” DIMENSION

72 i n c h es

OPENING LIMITATION** OVERALL THICKNESS ASPECT RATIO AVAILABLE ALLOYS

0.0 i n c h es 0.1 95 i n c h es 2 . 29 : 1 Sta i n l ess

DI-2 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

O pa q u e 0.0 % 2 . 23 l bs/sq f t PDI7Z

MAXIMUM “A” DIMENSION

24 0 i n c h es

MAXIMUM “B” DIMENSION

72 i n c h es

OPENING LIMITATION** OVERALL THICKNESS ASPECT RATIO AVAILABLE ALLOYS

0.0 i n c h es 0.1 5 0 i n c h es 1 3.9 1 : 1 Sta i n l ess, B ro n ze, B ra ss, Co p p e r

DS-1 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

O pa q u e 0.0 % 3.75 l bs/sq f t PDPLZ

MAXIMUM “A” DIMENSION

1 20 i n c h es

MAXIMUM “B” DIMENSION

72 i n c h es

OPENING LIMITATION** OVERALL THICKNESS ASPECT RATIO AVAILABLE ALLOYS

0.0 i n c h es 0. 2 1 7 i n c h es 1.50 : 1 Sta i n l ess, B ro n ze

DS-2 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

O pa q u e 0.0 % 3. 25 l bs/sq f t PDE1Z

MAXIMUM “A” DIMENSION

1 20 i n c h es

MAXIMUM “B” DIMENSION

72 i n c h es

OPENING LIMITATION** OVERALL THICKNESS ASPECT RATIO AVAILABLE ALLOYS

0.0 i n c h es 0.1 23 i n c h es 1 .95 : 1 Sta i n l ess

DS-5 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

O pa q u e 0.0 % 1 . 85 l bs/sq f t P D 4 PZ

MAXIMUM “A” DIMENSION

1 20 i n c h es

MAXIMUM “B” DIMENSION

72 i n c h es

OPENING LIMITATION** OVERALL THICKNESS ASPECT RATIO AVAILABLE ALLOYS

0.0 i n c h es 0.1 0 5 i n c h es 1 .07 : 1 Sta i n l ess

M21Z-5 MESH CATEGORY PERCENT OPEN AREA WEIGHT CRIMP STYLE*

O pa q u e 0.0 % 3.70 l bs/sq f t 2DH3Z

MAXIMUM “A” DIMENSION

1 4 4 i n c h es

MAXIMUM “B” DIMENSION

72 i n c h es

OPENING LIMITATION** OVERALL THICKNESS ASPECT RATIO AVAILABLE ALLOYS

0.0 i n c h es 0. 31 5 i n c h es 23.0 0 : 1 Sta i n l ess, M i l d Ste e l , B ro n ze, B ra ss, Co p p e r

MOUNTING

VERSATILE SPINE Banker Wire’s Versatile Spine provides a stylish alternative to traditional framing strategies. Laser-cut metal forms a three-layer laminate. The outer layers sandwich the center spine that has been cut to the exact pitch of the wire mesh fabric. Special mounting tabs can be incorporated into the center spine’s design, or when the overall width is less than 1/2”, standard glass mounting hardware can be used.

OVERALL DIMENSIONS MINIMUM WIDTH

Pe r D es i g n 1 .0 i n c h

NOMINAL THICKNESS

0. 5 i n c h es

AVAILABLE FINISHES

Sta i n l ess o r M i l d Ste e l fi n i s h e d w i t h Powd e r Coa t o r Wet Pa i nt

BANKER U-EDGE The Banker Wire U-Edge frame is a simple and cost effective method of framing for all types of wire mesh. Panels can be constructed with or without mounting tabs. Available in 13 gauge Plain Steel and Stainless Steel, the unique square bottom design creates a strong, uniform edge appearance suitable for any application.

OVERALL DIMENSIONS MINIMUM WIDTH

Pe r D es i g n 1.5 inch

NOMINAL THICKNESS

0. 5 i n c h es

AVAILABLE FINISHES

Sta i n l ess o r M i l d Ste e l fi n i s h e d w i t h Powd e r Coa t o r Wet Pa i nt

ANGLE IRON Banker Wire’s Angle Iron frames can be customized to suit your application. A traditional and fundamental structural shape, angle iron is available in many different profiles that can be used and combined to create a strong and suitable interface method for the look and interface required to make your project and budget a success.

OVERALL DIMENSIONS MINIMUM WIDTH

Pe r D es i g n 0. 5 i n c h

NOMINAL THICKNESS

To s u i t a p p l i ca t i o n

AVAILABLE FINISHES

Sta i n l ess o r M i l d Ste e l fi n i s h e d w i t h Powd e r Coa t o r Wet Pa i nt

INSTALLATION

RAILINGS

PARKING GARAGES

SPACE DIVIDERS

SIGNAGE

FURNITURE

ART

GRILLES

C.I. Banker Wire + Iron Works 600 Perkins Drive Mukwonago, WI 53149 USA Toll Free: 800-523-6772 Telephone: 262-363-6120 Fax: 262-363-9792 www.bankerwire.com sales@bankerwire.com

YOUR WIRE MESH AUTHORITY

2012a Edition

YOUR WIRE MESH AUTHORITY