Babco Commercial Equipment Catalogue - Fall 2023

BendPak HDS-14 BendPak’s HDS-14 four-post lift is a whole new breed of rugged. It features superior components that work better, are built to last and increase operator safety.

If your service bay needs to get under heavy-duty, oversized vehicles daily, this lift is what you need.

These commercial-grade car lifts really are second to none and are recognized worldwide as the industry benchmarks in dependability and quality.

FEATURES: 14,000lb. lifting capacity Mid to long-style approach ramps Single hydraulic cylinder mounted underneath runway Features heavy-duty 1/2” aircraft cable Internal anti-sway slider blocks in each column Fully enclosed lifting cables and safety locks

BendPak HDS-14X The “limo style” HDS14X lift is useful for vehicles that make use of its 229” runways. Limousines, as well as heavy-duty SUVs and trucks, need the extra length, and that’s where this heavy-duty four-post lift comes in handy.

With it’s 14,000-lb. lifting capacity, long runways and ample 70” rise, the HDS-14X allows most mechanics to stand upright to perform oil changes, exhaust service, wheel service and every other undercarriage activity.

FEATURES: 14,000lb. lifting capacity Mid to long-style approach ramps 229” runways Features heavy-duty 1/2” aircraft cable Internal anti-sway slider blocks in each column Fully enclosed lifting cables and safety locks

www.babco.ca | (800) 661-5313 | info@babco.ca

BendPak 10-AP SERIES BendPak’s all-new 10-AP Series feature Bi-Metric™ swing-arms which give users the ability to set their lift up in either symmetric or asymmetric configurations. Never switch out arms again.

Additionally, service lowered chassis-height vehicles with exclusive Low-Pro™ swing arms, featuring telescoping channels which have a shorter profile and a dropped-end pad receiver.

FEATURES: 10,000lb. lifting capacity Expandable beam accommodates wide or narrow drive-thru configurations Exclusive Bi-Metric™ arm design for more versatile arm positioning Drop-end arms provide a lower pad height Double-telescoping screw pads offer increased versatility

4 BendPak 10-AP Models to Choose From:

www.babco.ca | (800) 661-5313 | info@babco.ca

BendPak HDS-14LSX / HDS-14LSXE The legendary, 14,000-lb. capacity HDS-14LSX alignment lift pulls double duty as both car lift and alignment system, with integrated industrialstrength slip plates and turn plates right in the runways to maximize convenience.

The HDS-14LSXE alignment lift is the “limo style”

HD-14LSX

Standard Model

version of the HDS-14LSX. Compared to the standardlength version, this lift extends the overall length of the lift, as well as the runways, by 30”.

FEATURES: 14,000lb. lifting capacity Double duty as a car lift and alignment lift Industrial-strength slip plates and turn plates Two runway lengths to choose from Automatic leveling system

HD-14LSXE

Extended Model increases length by 30”

BendPak XPR-12CL / XPR-12CL-192 Every XPR-12CL two-post lift is designed to keep your floor clean. The Clearfloor design offers enough space for cars and trucks up to 12,000 lbs and the pure Direct-Drive performance is matched by cutting-edge technology and top-of-the-line materials.

XPR-12CL

Standard Model The XPR-12CL 192 is just as feature rich as the XPR12CL but with a 24” bolt-on extension, making servicing taller vehicles much more viable.

FEATURES: 12,000lb. lifting capacity 192” lifting height (XPR-12CL-192) Padded overhead safety shutoff bar Dual-synchro equalization system for equal lifting Oversized 53” tall carriage for superior strength and durability

XPR-12CL-192

Taller Model 24” Bolt-on Extension

www.babco.ca | (800) 661-5313 | info@babco.ca

Chicago Pneumatic QRS7.5HPD-1-TM The Chicago Pneumatic QRS7.5HPD is a single phase quiet rotary screw air compressor engineered for high performance, efficiency and reliability. Sporting a 7.5hp motor with a 60 gallon tank, the QRS7.5HPD air compressor belongs to the QRS line (Quiet Rotary Screw) of air compressors and is the perfect application for tire shops, maintenance, paint and autobody shops looking to have a consistent air flow.

Offering noise levels well below that of their piston-based counterparts, these little workhorses have the power and punch to offer air flow on a consistent basis but without the need for its own enclosure – so it can be installed anywhere.

FEATURES: Low sound enclosure Continuous operating capability 150 psig standard 60 gal ASME/CRN receiver tank (3-7.5 HP) 120 gal ASME/CRN receiver tank (10-15 HP)

Ranger RJS-2TH The RJS-2TH 2-Ton High Tripod Jack Stand is the ideal selection for stabilizing a lifted vehicle. The extended ACME screw adjusts to heights between 55” and 87”, while heavyduty rubber stabilization pads keep everything stationary and scratch-free.

Capable of hoisting up to 4,000 lbs., that support is crucial to keeping the right center of balance of your lifted vehicle.

The tripod design is an architectural classic for a reason: it’s efficient, powerful and almost impossible to knock over.

FEATURES: Perfect for holding drive-train or exhaust components Stabilizes vehicles that are raised on lifts Heavy-steel construction for maximum durability Quick adjust spin handle with thrust bearing Wide base provides maximum stability

Ranger RCS-1500 The Ranger RCD-1500 Hydraulic car dolly and wheel lift Go-Cart vehicle positioning jacks allow one person to effortlessly move autos, trucks, boats, trailers, lawn mowers / tractors, jet skis, motorcycles, airplanes and other wheeled and recreational vehicles easily with a safe and rugged design.

FEATURES: 1,500-lb. capacity per dolly Heavy-duty steel construction Available in sets of two or four Expandable frame accommodates variable tire sizes Move heavy loads with confidence and ease

www.babco.ca | (800) 661-5313 | info@babco.ca

Ranger RD-18G The Ranger RD-18G upright 18-gallon capacity oil drain features a stable body made out of heavy-duty translucent polyethylene that lasts for years on end. Comes with convenient hand pump.

FEATURES: Lightweight for easy portability Comes standard with oil drain pump Safe and easy to use Wide body for stability Tough construction will resist dents, rust and corrosion Heavy-duty stainless steel clamp Translucent polyethylene tank for easy viewing of fluid levels Easy-pour oil spout for simple evacuation 4 swivel, ball bearing casters Non-corrosive telescoping tube

Ranger RP-50FC The super-sized RP-50FC industrial oil filter crusher applies 25 tons of electric-hydraulic pressing power to flatten just about any used oil filter to 20% of its original size, all while removing 95% of the residual oil. Filters up to 15.25” long and 6” diameter are crushed in seconds flat.

FEATURES: Maximum crushing pressure of 50,000 lbs.

Filters are reduced to 20% of their original size with 95% of residual oil removed.

Automatic cycle feature lets you load the filter, push a button, and walk away.

Fulfills EPA and other mandated environmental standards Save on waste disposal costs and storage space Cycle time approximately 8 to 15 seconds depending on filter size.

Welded steel plate construction Automatic safety door stops operation when opened

www.babco.ca | (800) 661-5313 | info@babco.ca

QSP DB-8000-XL Designed to help remove struts, springs and strut assembly components, the DB-8000-XL makes for easy work by compressing the spring at four points during the compression process which ensures an even distribution of force. A strong, reliable tool for today’s safety-conscious shops.

FEATURES: 4 point compression assures even distribution of force Lower support plate supports stru when upper cap is removed Allows for full use of both hands Safety valve to prevent operation if guard is not properly positioned Weighs 190-lbs.

Can handle the heaviest “Coil over shocks” Quick, easy and safely compresses and removes springs

www.babco.ca | (800) 661-5313 | info@babco.ca