• Fan cooling mechanism prevents overheating enhancing unit’s life span signi cantly
• Convenient handle with grip and quality steel foot for long lasting use
• CSA Listed for US and Canada
• “Safe In Any Weather” operation
• MADE IN THE USA of US and global components
ATD BOOSTER CABLES
• 4 gauge stranded 100% copper conductors for maximum cold-cranking amps
• 2 gauge stranded 100% copper conductors for maximum cold-cranking amps (ATD-7975A)
• Tangle-free PVC insulation remains exible to -40˚F
• Includes zippered pouch for easy storage
FLUID EVACUATOR PLUS
• Evacuates or dispenses at the push of a button
• Convenient manual pump operation
• Integrated 2.3 gal. (8.8 l) capacity reservoir
• Large base with foot stabilizer
• Durable, chemical-resistant polyethylene
• Automatic
•
Speci cations:
•
M12 FUEL™ 3/8” SUBCOMPACT IMPACT WRENCH WITH FRICTION RING KIT
• Best underhood access
• Up to 225 ft-lbs of nut-busting torque
• 40% faster application speeds
• 4-Mode DRIVE CONTROL™ provides greater control over output speed and power. Includes auto shut-o and bolt-removal mode
• Auto shut-o mode prevents over tightening and increases productivity by applying no more than 15 ft-lbs. of torque
LOCKING PLIERS SET • Curved jaw o ers advanced control, providing additional contact points on multiple fastener types and round stock • Wire cutter for versatility • Forged steel
•
•
•
•
•
•
•
PLATINUM TECH SOCKET & RATCHET BUNDLE
INCLUDES 3 SOCKET SETS & A RATCHET SET
• PLT-99812: 12-Pc. 1/4” Drive Metric Deep Spline Socket Set
• PLT-99813: 13-Pc. 3/8” Drive Metric Spline Socket Set
• PLT-99814: 14-Pc. 1/4” Drive Metric Spline Socket Set
• PLT-99600: 2-Pc. 120 Tooth Ratchet Set
SUPER-DUTY 1/2” HD IMPACT WRENCH
72-PC. 1/4” DRIVE 6 POINT SAE & METRIC, STANDARD, DEEP & UNIVERSAL IMPACT SOCKET SET
Includes: Std. and Deep: 3/16”, 7/32”, 1/4”, 9/32”, 11/32”, 3/8”, 7/16”, 1/2”, 9/16”; 4, 4.5, 5, 5.5, 6-15mm; Std. Universal: 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5-15mm; Accessories: 2”, 4”, and 6” Extensions; 1/4” Dr. Universal Joint; 1/4” Hex to 1/4” Square Dr. adapter; 1/4” Female x 3/8” Male increasing adapter; case.
•
M18™ HOTSHOT
• Jump with M18™ Batteries
• Prepared To Jump In Under 70 Seconds
• Capacitors Rated Up To 500,000 Cycles
• Jump up To 8.1L Gas & 3.0L Diesel
• Up To 70 Jump Starts With One M18™ XC5.0 Battery
• Features a GLOW PLUG to indicate when power is ON
• Cord remains exible down to -40˚F
• Non-marring cord is oil, chemical and abrasion resistant
• 16/3 SJTW cord
• 13A, 125V, 1625W •
60’ TRI-TAP CORD REEL
The Lincoln model 91039 reel is a true game changer and a must have for every garage. The reel can mount to the wall or the ceiling and has a 180-degree heavy-duty mounting bracket. The triple outlet plug end supports multiple 120V electrical products and illuminates when there is power owing to it.
Features:
• 15A Circuit breaker with eset button prevents overload
• 12AWG x 60’ Foot SJTOW cord resistant to Grease, Oil, Weather
• Rated: 1875W,15A, 125V 60Hz
• Includes 5 ft. lead-in cord.
• Power indicator lights on both the reel and the triple outlet connector
• HD cord-lock system allows cord to be easily set at desired length
• Features bright white LED with high and low modes
• High: 325 lumens; 76m beam; runs 20 minutes
• Low: 45 lumens; 28m beam; runs 1 hour
• Ultra-compact design makes it easy to carry
MICROSTREAM® USB POCKET LIGHT
• High: 250 lumens; 68m beam; runs 1.5 hours
• Low: 50 lumens; 31m beam; runs 3.5 hours
• Lithium-ion battery charges in-product in 4 hours
• Multi-function push-button tail switch with charge indicator
MICROSTREAM® POCKET LIGHT
• White LED delivers 45 lumens; 41m beam; runs 2.25 hours
• Ultra-compact 3.60 in (91.5 mm) design ts in the palm of your hand or comfortably in your pocket
STREAMLIGHT JR.® LED
• 225 lumens with a 104 m beam distance
• Lightweight, durable, and comfortable in your hand at 6.5 inches
• Five lights in one: Drop Light | Hands-Free | White Light | High CRI Light with Color-Rite Technology® | UV Light
• 500 lumens; runs 3 hours (cool white light)
• Rotates 180° to aim the beam where you need it
#IWANTTHEBLUEONE
the maintenance of the most advanced vehicles on the market. USB connectivity - 100% customizable. OE Approved. Visit www.associatedequip.com for full speci cations
GRAPHICAL HAND HELD TESTER WITH THERMAL PRINTER AND USB PORT
• Graphical Hand-Held Tester w/Thermal Printer and USB port
• Tests 12V Flooded, AGM, Gel Cell, & EFB
BATTERY MANAGEMENT TOOL
Vehicle battery systems tted to modern cars require a complex system to control and maintain the best charge and discharge rates. The 12-0200 gives the operator access to all the functions complicated, time-consuming manufacturer scan tools have to perform the same function but in a fraction of the time. On average the total time required by the technician to reset a system is 30 seconds.
Visit www.associatedequip.com for full speci cations
4.5
10 Hp IRON SERIES
GENERAL PURPOSE FILTERS
General purpose lters remove harmful water condensate, pipe scale, dirt and rust from your compressed air system. This prevents corrosive damage to compressed air equipment and nished products. Typically, general purpose lters are installed upstream of regulators to prevent valve failure. They are also used as pre- lters to oil removing and coalescing lters to ensure high e ciency and long element life in applications such as paint spraying, instrumentation and phar maceutical.
REGULATORS
DRAINS
air pressure of the air line; self-relieving style units.
Nose); 11” Torque Lock™ Locking C-Clamp With Regular Jaws (48-22-3531); 6 “ Torque Lock™ Locking C-Clamp With Regular Jaws (48-22-3532)
15 amp/5.5 HP (maximum motor HP) motor provides more overload capacity, increasing performance and durability
• Large cutting capacity (5” round / 4-1/2” x 6-1/2” rectangle) provides the ability to cut a wide variety of materials
• Adjustable spark guard
Features:
• Powerful 12 Amp Motor Designed For Heavy-Duty Applications
• 4-Position Blade Clamp Allows For Flush Cutting And Increased Versatility
• Keyless, Lever-Action
DW756 Grinder Speci cations:
• Amps: 4
• Peak Horsepower: 5/8 Hp
• Spindle Diameter: 1/2”
DW758 Grinder Speci cations:
• Amps: 4.2
• Peak Horsepower: 3/4 Hp
• Spindle Diameter: 5/8”
• One-Touch™ guard eliminates the need for a tool to adjust the guard • 5/8”-11 spindle thread accepts a wide range of 4-1/2”
ATD-8160 8-Pc. 1/4” Double Cut Carbide Burr Set - Includes one each: ATD-8161, 8162, 8163, 8164, 8165, 8166, 8167, 8168
Wheel, Metal, Type 1, 4-1/2” x 1/16” x 7/8” $2.95
FNY-71866 Cutting Wheel, Metal, Type 1, 14” x 3/32” x 1” $11.95
FNY-71877 Grinding Wheel, Metal, Type 27, 4-1/2” x 1/4” x 7/8” $4.95 FNY-71985 Flap Disc, Type 298, 4-1/2” x 7/8”, ZA40 $8.95 FNY-71986 Flap Disc, Type 298, 4-1/2” x 7/8”, ZA60 $8.95 FNY-71987 Flap Disc, Type 298, 4-1/2” x 7/8”, ZA80 $8.95
Deep SAE Sockets: 3/8”–7/8”; (14) Standard Metric Sockets: 6–19mm; (10) Deep Metric Sockets: 10–19mm; 45-tooth , 3/8” Quick Release Ratchet;
3/16”–1/2”; (9) Deep SAE Sockets: 3/16”–1/2”; (8) Standard Metric Sockets: 4–12mm; 45-tooth, 1/4” Quick Release Ratchet; (2) Wobble Extensions: 2” and 6”; Spinner Handle; 1/4” F x 3/8” M
ATD-2275
72-Pc. Standard, Deep and Universal, SAE & Metric Impact Set - Std. and Deep: 3/16”, 7/32”, 1/4”, 9/32”, 11/32”, 3/8”, 7/16”, 1/2”, 9/16”; 4, 4.5, 5, 5.5, 6-15mm; Std. Universal: 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5-15mm; Accessories: 2”, 4”, and 6” Extensions; 1/4” Dr. Universal Joint; 1/4” Hex to 1/4” Square Dr. adapter; 1/4” Female x 3/8” Male increasing adapter; case. FREE 7-PC. MECHANIC’S PLIERS SET (ATD-827) WITH PURCHASE
12-Pc. Standard Length Metric Universal Impact Set - Std.: 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15mm; case
ATD-2220 20-Pc. Standard and Deep SAE Impact Set - SAE Std. & Deep: 3/16”, 7/32”, 1/4”, 9/32”, 5/16”, 11/32”, 3/8”, 7/16”, 1/2”, 9/16”; case
$49.95
ATD-2228 28-Pc. Standard and Deep Metric Impact Set - Metric Std. and Deep: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm; case $69.95
ATD-2248
48-Pc. Standard and Deep SAE and Metric Impact Set - SAE Std. and Deep: 3/16”, 7/32”, 1/4”, 9/32”, 5/16”, 11/32”, 3/8”, 7/16”, 1/2”, 9/16” ; Metric Std. and Deep: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15mm; case $99.95
ATD-2381
81-Pc. SAE and MM Impact Set - Std. and Deep: 5/16”- 1”; 7-22mm; Std. Universal: 5/16” - 1”; 10 - 19mm; Accessories: 3” Extension; 3/8” Universal Joint; 1/4” Hex x 3/8” Square Adapter; case. FREE 800 LUMEN WORK LIGHT W/TOP LIGHT (ATD-80395A) WITH PURCHASE $329.95 ATD-4601A 42-Pc. Standard and Deep SAE and MM Impact Set - SAE Std. and Deep: 5/16”–3/4”; MM Std. and Deep: 8–19mm; 3” extension; 1/4” Hex x 3/8” Sq. Dr. adapter; U-Joint; case $107.95
ATD-2450 12-Pc. SAE Deep Impact Socket Set - SAE Deep: 5-16”-1”; case $44.95
ATD-2250 12-Pc. Standard Length SAE Impact Socket Set - SAE Std.: 5/16”–1”; case $32.95
ATD-2301 13-Pc. Standard Length MM Impact SetMM Std.: 7–19mm; case $27.95
ATD-2324 24-Pc. Standard and Deep Length SAE Impact Set - SAE Std. and Deep: 5/16”–1”, case $74.95
ATD-2326 26-Pc. Standard and Deep Length MM Impact Set - MM Std.: 7–19mm; case $59.95
ATD-2701 13-Pc. Deep Length MM Impact Set - MM Std.: 7–19mm; case $41.95
ATD-2850A 5-Pc. 3/8” Dr. Impact Accessory Set - SAE Extensions: 1-3/4”, 3”, 6”; U-Joint; 3/8” F x 1/2” M adapter; 3/8” F x 1/4”M adapter; case $32.95
ATD-2864 4-Pc. SAE Impact Extension Set - SAE Extensions: 1-3/4”, 3”, 6”, 12”; case $31.95
ATD-2811 11-Pc. 3/8” Dr. SAE Pipe Plug Impact Socket Set - Male: 3/16” - 3/8”; Female: 1/4” - 3/8”; case $45.95
ATD-4625 10-Pc. SAE Impact Hex Driver Set - SAE Impact Hex Drivers: 1/4”–3/4”; case
ATD-4605 10-Pc. MM Impact Hex Driver Set - MM Impact Hex Drivers: 6–8mm, 10mm, 12mm, 14mm, 15mm, 17–19mm; case
ATD-4930
30-Pc. Deep Length SAE and MM Impact Set - SAE Deep: 7/16”–1-1/4”; MM Deep: 10–19mm; 21mm, 22mm, 26mm, 27mm; Extension: 3”; SAE Flip Socket: 3/4” x 13/16”; MM Flip Socket: 19mm x 21mm; case
ATD-4701A 5-Pc. 1/2” Dr. Impact Accessory SetExtensions: 3”, 6” , 10”; U-Joint; 1/2” F x 3/8” M adapter; 1/2” F x 3/4” M adapter; case
$74.95
$169.95
$52.95
ATD-4705 1/2” F x 3/4” M Impact Adapter $8.95
ATD-44219 19-Pc. 1/2” Dr. 6 Point SAE Standard Impact Set - SAE Std.: 3/8” - 1-1/2”; case $92.95
ATD-44419 19-Pc. 1/2” Dr. 6 Point SAE Deep Impact Set - SAE Deep: 3/8” - 1-1/2”;
ATD-4717
1” Dr. Truck Wheel Service Set - SAE & MM Std. 4 Pt.: 13/16”, 17mm, 21mm; MM Deep 6 Pt.: 33mm,35mm,41mm; SAE Extra Deep 6 Pt.: 1-1/16”,1-1/18,1-1/4”; Budd Wheel: 1-1/2” wheel socket x 13/16” square; case $259.95
17-Pc. Master Accessory Set - 1/4”: 2”, 4” and 6” Wobble Extensions; Universal Joint; 1/4” F x 3/8” M Increasing Adapter; 3/8”: 3”, 6” and 10” Wobble Extensions; Universal Joint; 3/8” F x 1/2” M Increasing Adapter; 3/8” F x 1/4” M Reducing Adapter; 1/2”: 3”, 6” and 10” Wobble Extensions; Universal Joint; 1/2” F x 3/4” M Increasing Adapter; 1/2” F x 3/8” M Reducing Adapter $71.95
TTN-30936 3-Pc. Low Pro le Adapter Set - 3/4” to 1/2”, 1/2” to 3/8” and 3/8” to 1/4” adapters $12.95 TTN-40160 3-Pc. Impact Socket U-Joint Set - 1/4”, 3/8” and 1/2” Impact Universal Joints $32.95 TTN-16298 9-Pc. SAE Magnetic Nut Setter - 1/4, 5/16, 9/32, 11/32, 3/8, 7/16, 13/32, 1/2, and 15/32”; Storage Rack $10.95
Pin Punch Set Pin: 1/8”, 5/32”, 3/16” and 1/4”; Solid: 1/4”; Center: 3/8” $14.95 ATD-762 5-Pc. Roll Pin Punch Set Roll Punches: 1/8”, 5/32”, 3/16”, 1/4” and 5/16” $14.95 ATD-760 8-Pc. Punch and Chisel Set Pin: 1/8”, 3/16” and 1/4”; Solid: 1/4”; Center: 3/8”; Cold Chisels: 1/2”, 5/8” & 3/4” $28.95
ATD-714 14-Pc. Punch and Chisel Set Pin: 3/16” x 3/8” x 6”, 1/8” x 3/8” x 5”, 3/32” x 3/8” x 5” and 1/4” x 1/2” x 6”; Center: 1/8” x 3/8” x 5”; Taper: 3/8” x 5/8” x 10”, 5/32” x 1/2” x 9”, 1/8” x 1/2” x 10” and 1/8” x 3/8” x 8-1/2”; Cold Chisels: 1/2”, 5/8”, 7/8” and 1”
$39.95
ATD-720 20-Pc. Punch and Chisel Set Pin: 3/32”, 1/8”, 5/32”, 3/16” 1/4” and 5/16”; Starter: 1/8”, 5/32”, 3/16”, 1/4” and 5/16”; Center: 1/4”, 3/8” and 1/2”; Flat Chisels: 1/4”, 3/8”, 1/2”, 5/8”, 3/4” & 7/8” $54.95
ATD-729 29-Pc. Punch and Chisel Set Pin: 3/32”–3/8”; Starter: 3/32”–5/16”; Cap Chisels: 1/4” and 5/16”; Center Punches: 1/4”–1/2”; Diamond Point Chisel: 5/16” and 3/8”; Half Round Nose Chisel: 5/16”; Flat Chisels: 1/4”–7/8”
$69.95
MAY-61044 14-Pc. Punch and Chisel Set Center Punch 3/16-5mm x 5”; Cold Chisel 1/4-6mm x 5”, 1/213mm x 6”, 5/8-22mm x 6-1/2”, 3/4-19mm x 7, 3/8-10mm x 5-1/2”; Line-Up Punch 1/8-3mm” x 7 7/8”; Pin Punch 3/32” x 4-1/2”, 1/8” x 4-3/4”, 5/32” x 5”, 3/16” x 5-1/4”, 1/4” x 5-3/4”; Solid Punch 1/8” x 5”, 3/16” x 5” $97.95
MAY-89021 Hammerless 3-Pc. Set Prick punch/center punch tool, 3/16 pin punch/hammer tool, and a cold chisel/ hammer tool $31.95
ATD-99800 5-Pc. Long Taper Punch Set Long Tapers: 1/8”, 5/32”, 3/16”, 7/32”, 1/4” $41.95
ATD-99801 6-Pc. Precision Punch Set Center Punch: 4-1/4”; Pin Punch: 1/16”, 5/64”, 3/32”, 1/8”; Solid Punch: 3/32” $25.95
ATD-99802 5-Pc. Punch and Chisel Set Chisel: 3/8”, 5/8”; Center: 5”; Pin: 3/16”; Solid: 3/16” $28.95
ATD-99803 12-Pc. Roll Spring (Pin) Punch Set Roll Punches: 1/16”, 5/64”, 3/32”, 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16”, 3/8”, 7/16”, 1/2” $75.95
ATD-99804 6-Pc. Roll Spring (Pin) Punch Set Roll Punches: 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16” $37.95
DGT-CEN3S301B 32-Pc. Transfer Punch Set Hardened tips; each piece marked with size; convenient roll pouch for storage $74.95
3ST 3-Pc. X-Long Pin Punch Set 16” length for increases access to hard-to-reach areas. Pin diameter sizes: 1/4”, 5/16”
GREY PNEUMATIC
Pc.
GRY-1281
GRY-81659CRD
12 Pc. MM Deep: 8-19mm; 3” Extension; 3/8” U-Joint; 1/4” Hex x 3/8” Square Adapter $169.95
81-Pc. 3/8”
5/16”-1”; 10 Pc. MM Std. Universal: 10–19mm; 3” Extension; 3/8” U-Joint; 1/4” Hex x 3/8” Square Adapter $594.95
3/8” Dr. SAE and Metric
Duo-Socket
- 12 Pc. SAE Std. and 12 Pc. SAE
5/16”-1”; 16 Pc.
and 16 Pc. MM Deep: 7-22mm; 3” Extension, 6” Extension; 72 Tooth Quick Release Ratchet
GRY-9298HC 14-Pc. 1/4” Dr. SAE and Metric Impact Hex Driver Set - 1/8”, 2mm, 5/32”/4mm, 2.5mm, 3/16”, 3mm, 7/32”, 5mm, 1/4”, 6mm, 5/16”/8mm, 7mm, 3/8”, 10mm
GRY-1297H 7-Pc. 3/8” Dr. SAE Impact Hex Driver Set - 3/16”-1/2” $74.95
GRY-1297MH 7-Pc. 3/8” Dr. Metric Impact Hex Driver Set - 4-7mm, 10mm, 12mm $74.95
GRY-1298HC 13-Pc. 3/8” Dr. SAE and Metric Impact Hex Driver Set3/16”-1/2”; 4-7mm, 10mm, 12mm
GRY-1398H 10-Pc. 1/2” Dr. Standard SAE Impact Hex Driver Set - 1/4”-3/4” $96.95
GRY-1498MH 10-Pc. 1/2” Dr. Standard Metric Impact Hex Driver Set6-8mm, 10mm, 12mm, 14mm, 15mm, 17-19mm $96.95
GRY-1598HC 18-Pc. 1/2”
88500: Water and Air Cleaning Wands for High E ciency Cooling Systems and All Types of Radiators.
88800: Interchangeable Heavy-Duty Cleaning Wands for Radiators and Other Hard-To-Reach Places.
RADIATOR ROCKET AND LINE CLEANER BLOW GUN
• Cooling coils for radiators, trans lines, oil, and fuel lines need daily cleaning in heavy duty work environments.
• Ideal for trailer truck, dump truck, earth moving, and tractor vehicles.
• Designed for shop and eld use.
• Removable brush head for access to space constrained coils.
COOLANT & BATTERY REFRACTOMETER
• Includes storage case, uid dropper, cleaning cloth and mini-screwdriver
HOSE CLAMP PLIERS
Used to loosen and remove a wide variety of automotive, metal or plastic self-tightening hose clamps
HOSE CLAMP PLIERS
• Allows for removal of plastic and/or metal self-tightening hose clamps with diameters of 11/16” - 2-1/2” (18mm - 54mm)
•
radiators, and condensers, ensuring optimal performance and e ciency
• Extends the lifespan of your lters without causing damage
• Removes dirt, dust, and debris, preventing clogs and maintaining the lter’s e ectiveness
FLEXIBLE HOSE CLAMP TOOL
• For clamps found
DUAL VIEW WIFI BORESCOPE
• Hi-Res 1080p cameras provide front and side video and image capture
• IP67 rated camera, lens and cable
• Ultra-bright lighting provided by seven total LEDs
• Flexible semi rigid 58” cable
• Unit transmits and connects to devices via an independent Wi-Fi signal up to 30ft away
WIFI BORESCOPE
• High-resolution, multiple aspect cam era (1920 x 1080, 1280 x 720, and 640 x 480) with adjustable LED lighting
CODE BUDDY™ PRO+ OBDII CODE SCANNER
• Works with all 1996 and later OBDII-compliant US, European, and Asian vehicles Supports CAN (Controller Area Network)
• Displays trouble codes and de nitions
• Reads live data stream
• Retrieves vehicle information (VIN, CIN & CVN)
• Clears codes, turns o MIL, and resets monitors
COOL SMOKE EVAP SMOKE MACHINE
Features dual-mode leak detection: test for leaks with or without smoke at the push of a button. Pressure andvacuum leak diagnostics with instant smoke vapor with UV enhanced dye. Includes a 4.1 oz. bottle of smoke solution.
DIAGNOSTICS
HD GLOBAL DIESEL COMPRESSION TEST SET
• Adapters to test Cummins, Bedford, Case, Caterpillar®, John Deere®, Fiat Allis, Ford Tractor, GMC, Hino Trucks®, International and Navistar, Isuzu, Mack, Massey-Ferguson, Mercedes, Mitsubishi-Fuso, Onan, Scania, Volvo, Wisconsin and others
LIGHT TRUCK COMPRESSION KIT
(12) Compression Test Adapters included for the following applications: Cummins/Dodge 5.9L 12V & 24V, Ford/Navistar 7.3L, 6.0L, 6.4L, 6.7L, T444E, VT365, Sprinter/Mercedes 2.7L, 3.0L, VW, Mazda, Nissan-UD, Cat-Perkins, Kubota, Isuzu, Hino, Toyota, Other Engines Utilizing M10 x 1.0, M1- x 1.25, M14 x 1.25, M 12 x 1.25 M8 x 1.0
5-PC. INJECTOR RAIL
FUEL
LINE CAP SET
Caps used to block o the fuel rail during fuel pressure diagnostics in 2003-2022 Cummins, 2001-2022 Duramax, and 2008-2022 Ford engines
CUMMINS 5.9L DIESEL FUEL SYSTEM TEST KIT
• Contains compound pressure/vacuum gauge, fuel pressure test adapters, inlet restriction test adapters, fuel volume test adapters and adapters necessary for testing on Cummins Series B and ISB engines (including Dodge Ram)
FORD POWER STROKE DIESEL FUEL SYSTEM TEST KIT
• For diesel fuel pressure testing 1994 to present
• Includes a 100 PSI gauge, a bleed o valve hose assembly, and all the adapters necessary to pressure test the fuel system on Power Stroke engines
GM 6.6L DURAMAX DIESEL FUEL SYSTEM TEST
KIT
• For diesel fuel pressure and vacuum testing on GM 6.6L Duramax engines
• Gauge assembly with 6-ft. hose and quick coupler
• 3-1/2” gauge reads 30 inHg to 15 PSI
BASIC
DIESEL FUEL PRESSURE TEST KIT
• Includes 100 PSI gauge assembly with 4-ft. hose, pressure relief valve and 6-ft. clear PVC tube, 5 banjo bolt adapters ranging from 8mm to 14mm and 1 repair kit
COMPUCHEK TESTER
• Fits Compuchek test ports on the fuel system of Cummins diesel engines as well as other diesel engines that have been out tted with the Compuchek test ports
• Consists of a hose assembly with a female Compuchek tting on one end and a 3-1/2”, 300 PSI gauge on the other
QUICK CHANGE AUTOMATIC TRANSMISSION AND ENGINE OIL PRESSURE TESTER
• Set of (21) adapters: (11) aluminum Metric,(7) brass NPT and (3) steel SAE
• 3-1/2” gauge has dual scale with ranges from 0–400 psi and 0–28 BAR
• Quick coupler connection on gauge assembly for fast, easy changing of gauge to the hose assembly
• 6 ft. hose for easy gauge viewing and the ability to test the vehicle from the driver’s seat
• 2-1/2” gauge has dual scale dial with ranges from 0–100 psi and 0–7 BAR; hook on gauge allows technician to hang gauge and hose assembly out of harms way
• Custom blow molded case
AUTOMATIC TRANSMISSION AND ENGINE OIL PRESSURE TESTER
• Tests major model domestic and foreign cars and light trucks
• More accurate than dashboard oil pressure gauges
• 6 ft. of nitrile (oil proof) hose to make testing easier
• Standard and metric ttings
• Checks oil pressure in automatic transmissions and gasoline engines
UNIVERSAL COMPRESSION TESTER
• Screw-in adapters with O-rings provide professional accuracy
• Adapters included: 14mm and 18mm short solid, 14mm and 18mm long ex and 14mm long reach
• Long ex 12” hose and adapters eliminate having to remove engine accessories to test compression
COMPRESSION TEST KIT FOR GASOLINE ENGINES
• Tests compression on all major model vehicle platforms, domestic and foreign with gasoline engines, including mini engines
• Quick coupler connection on gauge assembly for fast and easy changing of hose and adapter assemblies
• 2-1/2” gauge has dual scale dial with ranges from 0-300 psi and 0-21 BAR
12:1 LASER INFRARED THERMOMETER
• Long 12:1 distance to spot ratio
• Continuous backlit display
• Laser guide for accurate aiming
• Accuracy + 1% • Emissivity = 0.95
• Temperature Range: -22˚ to 932˚ F/-30˚ to 500˚ C
• Resolution: 0.1˚ F and C
• Fast response time for quicker work decisions
• Professional grade construction and design
POWER STEERING AND RACK TESTER
• Takes the guesswork out of power steering analysis quickly and accurately, by detecting defective power steering pumps and gears and kinked or clogged lines
• Includes most adapters needed to test domestic cars and light trucks and some imports
PROFESSIONAL COMPRESSION TEST KIT
• Includes adapters for use on motorcycles, marine and small engines and an air-hold adapter for performing valve seal repairs without removing the cylinder head(s)
• Manual pressure release for maintaining peak readings
• Professional-grade threaded adapters for leak-proof seals
CYLINDER LEAKAGE TESTER
• New M14 short thread adapter on a 26” hose assembly
• M14 long thread solid adapter
• 1/4” female x 1/8” male reducer adapter
• New design incorporates a round, anodized body with permanent laser etching for a sleeker appearance
8:1 INFRARED THERMOMETER
• Distance to Spot: 8:1
• Response Time (90%): 1 sec.
• Operating Range: 32˚ to 122˚ F (0˚ to 50˚ C)
• Battery Life: Typ. 18, min. 14 hrs.
CIRCUIT TESTERS
ATD-5513
Safe for work on automotive computers, ECMs, airbags, etc. Special V-tip allows safe piercing and can be removed to test hard-to-reach places. Operates on replaceable long-life “N” or “LR-1” size alkaline batteries (included).
Circuit Tester Easily checks 6 and 12V systems. 5 ft. heavy-duty lead. Tough plastic handle lights up if circuit is good. Lead remains exible in low temperatures.
ATD-5624 Heavy-Duty Circuit Tester with Coiled Lead Wire New coil cord design for ease of use. Acetate handle, coiled lead wire. Easily checks 6 and 12V systems. New full size comfortable acetate handle lights up when circuit is good. Leads remain exible in low temperatures. Ground lead stretches up to 10 ft.
LIS-32900 Heavy-Duty Circuit Tester/Jumper Heavy-duty circuit tester for checking low voltage up to 12 volts. By depressing the red button the tester becomes a jumper for powering electrical components or a ground. The probe, handle, cord and clamp are reinforced for durability. Comes with a strain relief spring on the cord. $24.95
ATD-55033 Heavy-Duty Cordless Circuit Tester 3–30V 3–30V detection range of DC voltage. Bi-directional polarity testing: Power and Ground. Dual color LED indicates red for power and green for ground on 6V, 12V and 24V systems. Compact size for use in tight access areas. Computer safe. For use on automotive, commercial vehicle and equipment repair.
12–42V Hybrid Circuit Tester For use on 12V & 42V Hybrid systems. Automatic Voltage Identi cation: BLUE LED for 12V and RED LED for 42V. Pointed probe tests through wire insulation. Computer and airbag
MASTER GLOBAL FUEL INJECTION
PRESSURE TEST KIT
• Covers all major model vehicle platforms, domestic and foreign, 1988 to present (does not include CIS/TBI)
• Test gauge assembly disconnects from test hose and valve assembly for easier storage and improved gauge protection
NOID LIGHT SET
• Quickly and easily tests electronic fuel injection systems on: GM TBI; GM ‘87present; GM ‘82-’91; Bosch PFI; Ford TBI; GM PFI; Geo TBI; GM SCPI
BASIC FUEL INJECTION PRESSURE TESTER
Tests most systems except Bosch CIS and GM TBI; 2-1/2” dual scale gauge reads 0–100 psi or 0–7 BAR; includes the necessary adapters, banjo bolts, and 16” gauge hose with quick coupler and adapter guide book
MASTER FUEL INJECTION
PRESSURE TEST KIT
• Tests most fuel injection systems both foreign and domestic
• Features (2) gauges with gauge protectors for accurate testing from 5-150 psi
• Includes late model GM, Chrysler, Mitsubishi and European applications
• Complete with 2 ft. of high quality hose, plus (3) ttings to test domestic and foreign cars and trucks with gasoline engines
• 3-1/2” compound gauge has a multicolor dual scale dial with ranges from 0-10 psi, 0-0.7kg/cm2 pressure and 0-28inHg/0-70cmHg vacuum
• Hook-on gauge enables technician to hang gauge and hose assembly to free his hands
FUEL INJECTION PRESSURE TESTER WITH SCHRADER ADAPTERS
• Enables testing on all cars with standard or small Schrader valves
• The 3-1/2” gauge (with hook for hands free use) has a dual scale dial with ranges from 0-100 PSI and 0-7 bar
• Quick Coupler connection at end of gauge hose (other QC adapters can be purchased as needed)
PRESSURIZED INDUCTION TOOL KIT
• Can be used to clean induction system through the air intake or through a vacuum line
• Tool comes complete with S-tool and vacuum line attachment
• Easy to read gauge for accurate pressure settings
• Sight glass allows the Technician to monitor chemical level –no guessing when the service is complete
• Schrader valve on gauge assembly allows for simple, safe depressurization of the system when the service is complete
FUEL INJECTION CANISTER CLEANER
• Two gauges enable a Technician to check the vehicle fuel pressure with the right side gauge, and then easily set cleaning pressure with the left side gauge by referring to vehicle fuel pressure on the right side gauge
• Cleans carbon from intake valves, injectors, and combustion chambers with a professional carbon cleaning solution
3 WAY EXHAUST BACK PRESSURE KIT
• Allows quicker and more accurate testing of exhaust blockages in catalytic converters, mu ers, etc
• The 2-1/4” special gauge has two multicolored bands for measuring at idle and 2500 RPM
DIAGNOSTICS
Ability to supply Power
•
•
•
•
•
•
• Multiple balancing programs
• Save weight memory feature
• Pinpoint laser weight indicator
• Rim Diameter: 10" – 30"
Width: 1.5" – 22"
• Max. Tire Diameter: 44"
• Max. Assembly Weight: 176 lbs.
• Power Supply: 110V
R155 Pro 3D Auto Technology Electronic Wheel Balancer with Microprocessor #RWB355SB
• Simple visual display Automatic program
• Internal data gauge
• Pinpoint laser weight indicator Rim Diameter: 10" – 30"
• Rim Width: 1.5" – 22" Max. Tire Diameter: 44"
• Max. Assembly Weight: 154 lbs.
• Power Supply: 110V
R146RP Swingarm Pro Tire
ROTARY LIFT
SPOA10-AV
Two-Post Asymmetric Lift with All-Vehicle Lift Arms
#SPOA10N20MO
Features
Extended length available
• Available colors: blue or red
• New all-vehicle arms
Asymmetrical column design
• Original “Double S” column design
• Truck and round adapters included
• Available with Shockwave™
• ALI Gold Certifed CALL
Specifcations
• Capacity: 10,000 lbs.
• Maximum Rise: 81-1/2"
• Overall Height: 143-1/2"
Overall Width: 137-1/2"
• Drive Through Width: 95-1/4"
• Front Reach:
Rear Reach:
• Minimum Adapter Height ″
• Width Inside Columns ″
• Rise Time: 45 Seconds
• Minimum Bay Size: 12' x 24'
Minimum Ceiling Height: 12'
ARO14
Open Front Alignment Rack Four Post Lift
#ARO14N201Y
Features
• Available with Shockwave™
• Extended length available
• Available colors: blue or red
• Two wheelbase options available: 182" or 215" Open-end design
• Dual function Sentinel Lock™ system
• Air flter regulator lubricator
• Single piece non-welded runway with tracks for rolling jacks
• Internal airline Stainless steel radius gauges
• Rear slip plates
• Two 7,000 lbs. capacity rolling jacks included
• Compatible with the new technology alignment systems on the market today
• ALI Gold Certifed CALL
For more information, visit www.rotarylift.com
FORWARD LIFT
I10 TWO POST LIFT
with
• Extended height available
• Available colors: blue or red
• Two width options available: 131" or 137"
• Symmetrical column design Spot-Rite™ 3-stage front arm design � spot vehicles asymmetrically or symmetrically
• Top mounted Direct-Pull lifting technology
Cylinder rod concealed inside carriage
• Single point lock release
• Adapters and extensions included
• Adapter storage bracket included
• Powder coat fnish
ALI Certifed
Specifcations
• Capacity: 14,000 lbs.
• Maximum Wheelbase: ″ or ″
• Maximum Two Wheel Align: ″ or ″
• Maximum Four Wheel Align ″
• Minimum Four Wheel Align ″ Rise: 78-3/4"
• Overall Length: ″ or ″
• Overall Width:
• Width Inside Columns: 116-1/4"
• Length Between Columns: ″ or ″ Height of Columns: 109-1/16"
• Runway Width: 20"
• Runway Height: 7"
• Width Between Runways: 43"
• Rise Time: 65 Seconds
• Motor: 208/230V, 2 HP
• Minimum Bay Size: 15' x 26' or 15' x 28'
ARO16
Open Front Alignment Rack Four Post Lift #ARO16N001 Features
• Extended length available
• Available colors: red
• Open front design
• Dual function Sentinel Lock™ system Internal airline with air flter regulator lubricator
• Simple intuitive control center
• Oversized columns and rollers
• Oversized air actuated slip plates
• 9,000 lbs.
• Capacity: 16,000 lbs.
• Maximum Two Wheel Align: ″ or ″ • Maximum Four Wheel Align ″
Columns: 117"
• Length Between Columns: ″ or ″ Runway Width: 26"
•
CR14
Specifcations Capacity: 10,000 lbs.
• Maximum Rise ″ with ″ extension
• Overall Height ″ • Overall Width ″ or ″
• Drive Through Width ″ or ″ Overhead Switch Height ″
• Front Reach ″
• Rear Reach ″
″ Min/Max Adapter Height: ″ with no adapter extension ″ with ″ adapter extension
• Width Inside Columns: ″ or ″
• Adapter Heights: ″ and ″
• Motor: 208/230V, 2 HP
• Ceiling Height Required ″
Includes low profle threaded adapters and (4 each) adapter extensions at 3-1/2" and 5"
Four-Post Lift #CR14N201Y Features
• Extended length available
• Available colors: blue or red
• Two wheelbase options available: 182-1/2" or 215"
• 78-3/4" rise height provides better vehicle service access Heavy duty high-performance cable and sheaves system
• Easy to use single point lift operation with one button air operated lock release
• One piece formed runway design incorporates rolling jack channels Multi-position lock components allow lift to be level at any lock position
• Self-chocking 41" approach ramps with protective strips
• Drive Through Width (Outside of Tire to Outside of Tire): 97"
• Height of Columns: 97"
• Clearance Between Columns: 109-1/2"
• Clearance Between Runways: 39" Outside Runway to Outside Runway: 79"
• Motor: 115V, 1 HP
MAHLE Service Solutions A/C refrigerant handling systems stand out in the industry with the following features:
+ Quick and easy access to key service points - no need to remove components to service the unit
n Data management and reporting for refrigerant use optimization and warranty reporting
+ W iFi/Bluetooth enabled for software updates, network printing and remote MAHLE tech support
+ iOS and Android phone app available for remote session mirroring and advanced functionality
DIAGNOSTIC TOOLS
ADAS SYSTEMS
IA9 Wheel Alignment and ADAS Calibration Frame
#IA900*
• 24" touchscreen monitor
Simulcast from MaxiSYS Ultra
• MaxiSYS Ultra tablet cradle with controls
• MaxiSYS interface instead of PC for wheel alignment
Robotic frame movement
• Precise optical measurement with 6 high resolution cameras
• Self calibrating cameras
• Cameras automatically track vehicle height on lift CALL US FOR PRICING
*Part # will vary depending on additional accessory packages IA900WA, IA900WAT, IA900LDW, IA900LDWT, IA900AS, IA900AST
AUTEL DIAGNOSTIC TABLETS
• Enhanced AutoVIN and ScanVIN for the most accurate vehicle identifcation
Dynamic color-coded CAN bus & Module Topology
• Simplifed security gateway access
• Combines vehicle communication and measurement functions
Built-in preset guided tests for faster operation
MaxiSYS MS9 9 Advanced Diagnostic Tablet
#MS919
9.7" heavy duty touchscreen CALL US FOR PRICING
MaxiSYS MSUltra ADAS Advanced Diagnostic Service Tablet
#MSULTRA
• 12.7" heavy duty touchscreen
• View multiple functions at once
• Docking station included CALL US FOR PRICING
TEXA USA DIAGNOSTIC SCAN TOOLS
• Compact and reinforced designs
• Sufcient space to fle data and applications
• Multi-touch capacitive display
Multi-use for almost any mode of transportation Axone Nemo Light
Axone Nemo Plus
• 11.6" touchscreen and rugged design
Built-In camera for capturing any maintenance operation
• Ergonomic and adjustable handle for easy display and transport
Multi-brand built for cards, light commercial vehicles, trucks, ag, construction, bikes and boats CALL
IA800 Optical ADAS Positioning System Wheel Alignment Pre-Check #IA800*
• Intelligent optical positioning system for Autel Standard Calibration Frame Includes 6 hi-res cameras, wheel clamps, targets, and power supply
• Complete ADAS calibration frame positioning in as little as 1 minute
• Do away with mechanical measurements
• Signifcantly reduce setup time and increase positioning accuracy
• Ideal for collision repair, glass replacement, and repair shops Fast, accurate, and easy
• Check alignment tolerances prior to calibration CALL US FOR PRICING
*Part # will vary depending on additional accessory packages
BOSCH
ADS DIAGNOSTIC SCAN TOOLS
• Complete Domestic/Asian/Euro coverage for vehicles as far back as 1976 Approved by FCA to unlock Secure Gateway (SGW) protected vehicle
• Over 14 hours of battery runtime with over weeks of standby
• Fastest performance with Quick-Scan, Android 9 OS or higher, latest hardware/software technology Wireless J2534-compliant VCI included
• Easy to use and technician approved user interface
• Lifetime Warranty
ADS 525X Diagnostic Scan Tool #3945
• Ultra crisp inch vibrant high defnition display with full widescreen viewing CALL US FOR PRICING
ADS 625X Diagnostic Scan Tool #3970
• Ultra crisp inch vibrant high defnition display with full widescreen viewing
• Multipurpose docking station charges tablet, provides AC power to VCI to access repair information without being connected to vehicle and seamless wireless updates CALL US FOR PRICING
TOPDON DIAGNOSTIC SCAN TOOLS
• Rear facing cameras to capture on the job imagery
• 2 years free on software updates
Phoenix MAX #PXMAX J2534-Compliant
Phoenix Remote #PXREMOTE
•
•
•
•
•
SMARTWASHER
HOSE REELS
8" x ' Premium Duty Hose Reel
#7650-OLP
• Individually powder-coated steel components
Low-pressure 3/8" x 50' PVC hose included; hose is for air or water service only
• Guide arm adjusts to seven positions CALL US FOR PRICING
SPRAY WASH CABINET
SMARTWASHER® SW-437 Mobile Heavyweight Parts Washer Kit #14741
• Kit includes: SW37 SmartWasher unit, 5 gallon jugs of SW
• 1000lb capacity
•
• Oversized cleaning sink
• Electric pump (300 gph) and adj tstat (105° – 115°) CALL
3/8" x 50' REELSAFE® Controlled Return Hose Reel
#RS7650-OLP
The new REELSAFE® Series RS7000 controlled return hose reel is an expansion of the rugged design that set the industry standard. With safety at the forefront, REELSAFE® pays out like a traditional reel though is specifcally engineered to retract the hose at an average walking speed. The centrifugal clutch, integral to the reel base, greatly decelerates the hose retraction speed by up to 83% vs. a Series 7000 reel. CALL US FOR PRICING
NORTON VAC RACK
VacRack Bundle (Cart, Vac Unit and Hose) #NOR12400
• Includes vacuum hand blocks 91381, 91382 & 91383 CALL US FOR PRICING
PIPING SYSTEMS
Parker Transair®
• Quick connection technology
Modular and reusable
• Corrosion resistant
• Optimum fow rate
• 100% recyclable
Transair’s modular aluminum pipe delivers superior performance for compressed air, vacuum and inert gas applications. The aluminum construction prevents corrosion build-up and deterioration of the pipe over time All Transair aluminum pipes leave the factory with a QUALICOAT certifed coating for protection against environmental effects. Transair will not add additional contaminates into a compressed air system. The quality of air leaving the compressor room will remain unchanged in a Transair system.
With Transair, there is no need to paint the piping to indicate the media being conveyed. Transair comes in three standard colors: blue for compressed air, gray for vacuum, and green for industrial/inert gasses.
A Transair system can integrate into existing copper and steel compressed air systems without compromising performance, making it ideal for system upgrades or expansions. The lightweight materials, quick connection technology and minimal required tooling allow a Transair system to be installed 4x faster than traditional methods.
THE B E S T OF B O TH W O R LD S
SOFT SIDE TOOL BAG
•
BODY REPAIR
•
• Dual piston pump delivers faster lifting speeds saving time and money
to use
•
HYDRAULIC AIR RIVET GUNS
• Powerful and reliable high speed production tool
• Quick release air valve for fast cylinder return
• Performs well at any angle
• Small size and light weight allow use in hard-to-reach areas without user fatigue
• 5850 includes (4) nose pieces: 3/32”, 1/8”, 5/32” and 3/16”
• 5851 includes (4) nosepieces: 1/8”, 5/32”, 3/16” and 1/4”
• Can be used with 3/32”, 1/8”, 5/32” 3/16”, or 1/4” aluminum and steel rivets
• Nosepieces conveniently store underneath rubber base
12” NUT/THREAD HAND RIVETER KIT
Set Includes: 12” heavy-duty nut/thread rivet tool with double compound hinges; (1 ea.) metric mandrel/nosepieces in M5, M6 and M8; (1 ea.) SAE mandrel/nosepiece in 10-24, 1/4”20 and 5/16”-18; (10 ea.) of the following rivet nuts in M5, M6, M8, 10-24, 1/4”-20 and 5/16”-18; wrench
•
•
PNEUMATIC RIVET NUT
SETTING KIT
Features:
• Includes (8) mandrels/nosepieces in the following sizes: M4, M5, M6, M8, M10, 1/4”, 5/16”, 3/8”
• Instantly set rivet nuts with the pull of the trigger
• Quickly un-thread set rivet nuts by operating free spinning rear wheel
• 2,680 lbs. of instant air-hydraulic pulling force
Features:
• Tool Stroke: 6.5mm • Air Inlet: 1/4” NPT
• Air
HEAVY-DUTY 1/4” STUBBY HAND RIVETER
• 3 piece Chrome Moly steel jaws provide long lasting tool
• Includes (5) Nosepieces: 1/8”, 5/32”, 3/16”, 7/32” and 1/4”
Length: 13” HEAVY-DUTY 1/4” HAND RIVETER
Speci
• 2-1/4” nose and heavy-duty metal construction
• Extra-long handles for excellent leverage • (5) nosepieces to set 1/8, 5/32”, 3/16”, 7/32” and 1/4” steel and aluminum rivets • Overall Length: 20-3/4”
AST-400E Smart Eraser
in the USA $199.95
Molded rubber with 5/16”” – 24 thread arbor for use with the 533ET or 1208A; Pad size: 4”; For use with Astro model # 533ET or 1208A; USE WITH
4000RPM TOOL; NOT FOR USE WITH STANDARD NON-GEARED DIE GRINDERS; Made in the USA
AST-400E6 6 pack Smart Eraser Molded rubber with 5/16”” – 24 thread arbor for use with the 533ET or 1208A; Pad size: 4”; For use with Astro model # 533ET or 1208A; USE WITH MAXIMUM RATED 4000RPM TOOL; NOT FOR USE WITH STANDARD NON-GEARED DIE
SANDERS
RIVET TOOL
• Set blind rivets from 1/8” dia. in all alloys, up to 3/16”
• Standard 1/8”, 5/32”, and 3/16” nosepieces, a service wrench, swivel inlet air coupler and a mandrel collection bottle
1/4” RIGHT ANGLE DIE GRINDER WITH FREE 1/4” MINI DIE GRINDER
Set Includes: 1/4”
• No Load Speed: 20000
• 1/4” air inlet
• Recommended Air Pressure: 90 psi
• Average Air Consumption: 3 CFM 1/4” MINI DIE GRINDER
• No Load Speed: 25000 rpm
• 1/4” air inlet
• Recommended Air Pressure: 90 psi
• Average Air Consumption: 2.2 CFM
1/4” AIR HYDRAULIC RIVET TOOL
• Supplied with 3/32”, 5/32”, 3/16” and 1/4” standard nosepieces, service tools, swivel inlet, air coupler and a mandrel collection bottle
• Recommended air line pressure is 85–95 psi
RIVET TOOL
Known and
and 3/16”) and a service wrench.
1/4” SURFACE PREP KIT
2” Type III Disc Holder ATD-6601
• Type III fastener features a roll-on/roll-o style
• Sets up to 3/16” rivets • Includes (4) nosepieces and sample rivets
• Easily transforms from creeper to shop seat with the pull of one pin
• 40” heavy-duty steel frame
• (6) 3” polyurethane oil resistant casters swivel easily with full ball bearings
• Fully upholstered pad
• Powder coat !nish
Speci cations:
• Capacity: 450 lbs.
• Creeper Dimensions: 40” L x 7-1/2” H x 19” W
• Seat Height - 18.5”
• Weight: 19.9 lbs.
KEEPER CREEPER HANGER
FOLDABLE CREEPER PAD
• Water, chemical and impact resistant
• (4) cut-out compartments for small parts
• Size (unfolded): 47.625” x 16.5” x 1.125”
ORIGINAL TRAXION MONSTER GEAR SEAT
• Large padded tractor seat provides long-use comfort
• Pneumatic Cylinder for easy height adjustment
• Spinning Gear Tray keeps tools and parts within easy reach
• Handy ruler and metric gauge
• 5” Casters for best-in-class mobility
• Seat height adjusts from 13 1/2” to 17 1/2”
• Powder-coated steel construction for durability
•
USE IN ANY DIRECTION EVEN UPSIDE DOWN, TO HOLD HAND TOOLS, SCREWS, NUTS, BOLTS, AND OTHER SHOP, OFFICE, OR CRAFT SUPPLIES
SHOP
BRAKE & WHEEL
BRAKE BLEEDER KITS
ELECTRONIC DIGITAL BRAKE ROTOR GAUGE
• Pointed anvil and 3.50” long arms to easily inspect rotors
• Depth rod for measuring pad wear
• Easy to read digital display with inch/metric conversion
• 0-4.00”/10-100mm Range; .001”/.01mm Graduations
ELECTRONIC DIGITAL BRAKE DRUM GAUGE
• Graduated in .001”/.01mm increments
• Range: 4”-20.65” (150mm-515mm) with selectable depth stops
• Easy to read digital display with SAE/Metric conversion
• Pointed anvils and 4.25” long arms to inspect drums
SILVERLINE ELITE AUTOMOTIVE TEST KIT
Designed with proven features, the Silverline Elite Automotive Kit delivers both vacuum and pressure. The dual capacity combines two pumps into one. 4.5 oz. uid reservoir bottle with uid transfer & storage lids. Includes an assortment of adapters, plugs, tubes and master cylinder re ll kit.
POWER STEERING ADAPTER KIT
For use with Mityvac hand vacuum pumps to remove trapped air from power steering systems. Each adapter is designed to t snugly in the neck of the power steering reservoir to form an air-tight seal when vacuum is applied. Includes rubber cone shape 5/8”-15/18”, GM two-tab cap, and Ford 1-1/4”
18-PC.
•
•
•
BRAKE CALIPER PRESSES
277: Works on small and medium single piston brake calipers found in subcompact to midsize cars with single piston calipers.
Range: .95” to 2.25”
279: Works on twin & quad piston calipers,and
2-PC.
BUSHING
BRAKE SPRING FORK
•
DISC BRAKE PISTON TOOL
Rotate the parking brake activated piston back into the caliper cylinder when replacing worn pads on vehicles equipped with four wheel disc brakes
ADJUSTERS
PISTON BRAKE CALIPER COMPRESSOR
• Compresses
BRAKE PISTON WIND BACK TOOL, 2 & 3 PIN
• Adapter will work on right or left hand rewind calipers
• 2 Pin range is from 1/2” to 1-1/2”
• 3 Pin range is from 1” to 1-11/16. Use with a 3/8” square drive
•
11-PT. TRUCK BRAKE CALIPER SOCKET
2-PC.
Bendix/Knorr-Bremse air disc brakes
BRAKE PAD SPREADER
• Compresses
and 1-1/8”, (1) Handle for use with air
(1)
$47.95 LIS-58100 12-Pc. Inner Tie Rod Tool Set The long socket slips over tie rod end and crows foot engages on socket for easy removal and installation of tie rods with inaccessible wrench ats. Includes: (12) Crowsfeet: 1-3/16”, 1-1/4”, 1-3/8”, 1-1/2”, 1-5/16”, 1-7/16”, 29mm, 32.5mm, 33.6mm, 38.4mm, 40mm and 42mm to t many cars, trucks and SUVs. $184.95
ATD-8629 Wheel Hub Removal Tool Safely removes frozen hub assemblies instantly. Universal mount ts all axle bolted hubs (5, 6 and 8 lug hubs). Mounts to 2 studs using supplied ange nuts. Use with 5 lbs. hammer to knock frozen hubs out of axles. 3/4” steel backing plate and reinforced striking plate for long life. $151.95
LIS-40100 Hub Remover Fits on most 5, 6 and 8 lug hub assemblies found on cars and trucks. Bolt the 1/2” thick driving plate to the hub using the hardened washers and existing lug nuts. Insert the hardened thread forcing screw to push against a solid surface to loosen the hub assembly
ATD-3053 Rear Axle Puller Set Slide hammer pulls many ange-type rear axles and axle bearings. Includes: (3) bearing adapters, (1) 5/8”-18T x 22-1/2”
UNDER HOOD
3-PC. TAILPIPE EXPANDER SET
• Small Expander: 1-1/8” to 1-3/4”
• Medium Expander: 1-1/2” to 2-1/2”
• Large Expander: 2-1/8” to 3-1/2”
• (3) Spare sets of rubber O-rings • Blow molded storage case
Collet sets expand
from 1-5/8” to 4-1/4”. Expands all
EXHAUST PIPE CUTTER PLIERS
Cuts pipe from 3/4” to 3-1/4” (19mm to 83mm) in diameter Warranty does not cover normal dulling of cutting wheels from repeated usereplacement cutting chain PRT5721-01 available for purchase
10-PC. FLARE NUT SOCKET SET
Works
Set includes: 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm and 19mm
11-PC. OXYGEN SENSOR & SENDING UNIT SOCKET SET
•
•
SPANNER WRENCH
Set
UNDER HOOD
•
6-PC. SPARK PLUG & GLOW PLUG SOCKET SET
• For removal and installation of Spark Plugs, Glow Plugs and Pressure Sensor Glow (PSG) Plugs
• Includes 5 plug protectors for sensitive PSG plugs
• Includes: 8mm x 6-point; 9mm x 6-point; 10mm x 6-point; 12mm x 6-point; 14mm x 12-point; 16mm x 6-point
•
turing
3/8” DRIVE 10-PC. MASTER SPARK PLUG SOCKET SET
• Seven of the most popular spark plug socket sizes for use on a majority of foreign and domestic vehicles
• Sockets are equipped with internal magnets to securely hold spark plugs in place during both removal and installation processes
INLINE SPARK TESTER WITH COIL-ON-PLUG WIRE
• Gives a visual check of spark energy for coil on plug or standard ignition systems
• With engine running, the tool ashes a mirror image of the ignition spark
BROKEN SPARK PLUG REMOVER KIT FOR FORD TRITON 3 VALVE ENGINES
• Porcelain pusher for when the porcelain breaks o in the spark plug tip
•
3-PC. 3/8” DR. 5/8” SPARK PLUG SOCKET SERVICE KIT
ATD-276 76-Pc. Tap & Die Set
#4-40, #6-32, #8-32,#10-24, #10-32, #12-24 machine screw plug tap and 5/8” hex dies; 1/4”-20, 1/4”-28, 5/16”-18, 5/16”-24, 3/8”-16, 3/8”-24, 7/16-14, 7/16”-20, 1/2”-13,1/2”-20 fractional plug tap and 1” hex dies; M3x0.5, M4x0.7, M4x0.75, M5x0.8, M5x0.9, M6x1 metric plugs taps and 5/8” hex dies; M7x1, M8x1,M8x1.25, M9x1, M9x1.25, M10x1.25, M10x1.5, M11x1.5, M12x1.5, M12x1.75 metric plug taps and 1” hex dies; 1/8”-27 NPT and 18-/8”-28 NPT pipe thread plug taps and 1” hex dies; adjustable die stock for 1” dies; plain die stock for 5/8” dies; adjustable handle tap wrench for taps 1/4”–1/2”; 2-in-1 tap wrench for taps 1/4”–1/2”; t-handle tap wrench for taps #0–1/4”; metric thread pitch gauge; fractional thread pitch gauge; molded case
$159.95
ATD-277 117-Pc. Tap & Die Set The ATD-277 Tap and Die Set includes everything in the ATD-276 Tap and Die Set; #3, #7, #9, #16, #19, #20, #21, #25, #29, #30, #36, #39, #43, letter B, letter F, letter H, letter I, letter J, letter O, letter Q, letter R, letter S, letter U, letter Z, 5/64”, 7/64”, 5/32”, 1/4”,
VSG-26317DC 41-Pc. Metric Tap & Hex Die Set M3x0.5, M4x0.7, M4x0.75, M5x0.8, M5x0.9, M6x1, M7x1, M8x1,M8x1.25, M9x1, M9x1.25, M10x1.25, M10x1.5, M11x1.5, M12x1.5, M12x1.7; 1/8”-28 BSP; plain die stock; 5/8” hex dies; adjustable die stock for 1” dies; adjustable handle tap wrench for #0–1/2”; t-handle wrench for taps #0–1/4”; 2-in-1 tap wrench for taps 1/4”–1/2”; 18 leaf metric thread pitch gauge; molded case
VSG-26377DC 76-Pc. Machine Screw/SAE/MM/Tap & Hex Die & Drill Bit Deluxe Set (6) machine screw taps and (6) dies; (10) SAE taps and (10) dies; (16) metric taps and (16) dies; (2) pipe taps and (2) dies; high speed drill bits; spiral screw extractors; adjustable handle tap wrench; 2-in-1 tap wrench; T-handle wrench; pitch gauges; molded case
VSG-24606DC 41-Pc. Machine Screw with SAE Tap & Die Set #4-40, #6-32, #8-32,#10-24, #10-32, #12-24 plug tap and 5/8” hex dies; 1/4”-20, 1/4”-28, 5/16”-18, 5/16”-24, 3/8”-16, 3/8”-24, 7/16-14, 7/16”-20, 1/2”-13,1/2”-20 plug tap and 1” hex dies; 1/8”-27 NPT pipe thread plug tap and 1” hex die; adjustable die stock for 1” dies; plain die stock for 5/8” hex
for taps #0–1/2”; t-handle wrench for taps #0–1/4”; 2-in-1
$279.95
$174.95
$399.95
KTL-95600 SAE Stud Removal and Installation Kits 5/16 x 18, 5/16 x
ATD-5085 Variable Speed Lever Pump 2 pc. telescoping suction tube ts 16 to 55 gal. drums. Telescopic tube extends 24-3/8” to 35-1/2”. Recommended
•
•
•
Advanced welding mask with Tru Color technology, featuring dual headband options, LED light, and superior 1/1/1/1
•
repair, general fabrication, maintenance cutting, brazing, heating, DIY
ADF WELDING MASK WITH HOOD
•
•
SPECIALTY JACKS
JACKS
•
WIDE TRUCK
20-TON TRUCK RAMPS
1,250 LBS. FOLDABLE ENGINE STAND WITH GEARED 360° ROTATABLE HEAD
• ATD Engine Stands are constructed from heavy-gauge, welded, square tubular steel and feature extra-long handles with rubber grip for easy rotation and maneuvering
• 63:1 gear ratio for e ortess engine rotation
• Equipped with 360 degree swivel head
• Vertically foldable design for space saving
• 6 Swivel casters allow easy movement
• Meets or exceeds ASME PASE-2019 standards
Speci cations:
• Capacity: 1,250 lbs.
• Overall Height: 38-1/4”
• Base Size: 42” x 28-3/4”
• Wheel Diameter: 3-1/2”
• Head Plate: 8” x 10-1/4” x 6-1/2”
• Head Plate Thickness: 5/8”
• Meets or exceeds ASME / PASE Current standards
2
1,250 LBS. U-STYLE ENGINE STAND
• ATD engine stands are constructed from heavy-gauge, welded, square tubular steel and feature extra-long handles with rubber grip for easy rotation and maneuvering
• Meets or exceeds ASME/PASE Current standards
Speci cations:
• Capacity: 1,250 lbs.
• Base Size: 33-3/8” x 34-5/8”
• Head Plate Expansion: 5-7/8” x 10”
• Mounting Arm Dimensions: 7/8” x 2-13/16”
• Overall Height: 37-3/8”
• Head Plate Thickness: 5/8”
• Wheel Diameter: 3-1/2”
• Handle Length: 13-3/4”
2 TON FOLDING ENGINE CRANE
• Heavy-duty welded construction with rugged reinforced tubular steel
• Metered control release valve for precise lowering control
• Foldable for easy storage
• Meets or exceeds ASME PASE Current standards Speci cations:
