WHAT WE ARE PROUD OF:

DAF Hungary Ltd.

”We chose Autodigit Service Ltd. as our partner to implement electronic developments. With their help, the development is always finished in time.”

VOLÁNBUSZ cPlc.

The largest public bus transportation company in Hungary

We are proud that VOLÁNBUSZ cPlc. chose us to be their contracted partner for electrical solutions.

Kom-Szer2000 Kft.

”We reached out to AutoDigit Service Ltd. due to control problems which came up during repairing utility vehicles. They achieved significant financial savings for our customers because of the successful repair.”

See how we work on TV2’s show

Scania EMS S7/S8 ECU

Euro 5, Euro 6, Scania R420, R450, N320, Scania Truck & Bus series XPI, F, K, N, P, G, R & T

If engine is warm it stops and won’t start. It’s not possible to communicate with the motor controller, it works perfectly when it is cold. Or does not work at all, shows all kinds of error messages, after deleting, shows completely random error codes.

5638 or 1606 - engine controller internal memory error

Scania EMS S6 ECU

Euro 3, Euro 4, Euro 5, F, K, N, P, G, R & T

No communication is possible with the EMS, cannot be woken up. Speed sensor errors are stored in the ECU (T74, T57).

T74 - In case of Euro 4/5: 4866 - 4872

In case of Euro 3: 4353 - 4359

T75 - In case of Euro 4/5: 4882 - 4888

In case of Euro 3: 4609 - 4615

Scania Coordinator Assy

Scania T, P, G, R series EURO 3, EURO 4 emission

Communication errors on the Red CAN-BUS.

Scania OPC5 / Ret2

Scania G, R, P model 2005-2015

When the clutch is released, the vehicle does not start, only for repeated attempts. Sometimes it selects the gear and then throws it into neutral. Output shaft speed sensor fault.

Coordinator error - all of the control lights light up. By reading fault code you can see: coordinator fault active, CAN fault Truck won’t start, or it goes in limp mode