HOW TO INSTALL AND MAINTAIN NATURAL TURF At Aushenstone, we know and understand turf !!
The first step in installing a natural turf is to know how many square meters of lawn you would need. This can be done by measuring the marked out lawn area.
Prepare the Soil Once you have prepared the site, the next step is to prepare the soil. If your soil is already sandy and not hard setting then all you need to do is turn it over and level it.
Laying the Turf The turf should be laid and installed by experts but if you are looking forward to doing it yourself then the first thing is to remove the plastic, give it a light water treatment and begin rolling it as soon as possible.
----------------------------------------------
Measure Your Site
Prepare the Site Once you have measured the site, the next step is to prepare it for the installation. Our experts recommended checking the site thoroughly and remove all weeds and grass.
Install an Irrigation System If you plan on using an irrigation system, then our experts say that it should be installed before adding loam and putting the turf down.
The First Month Maintenance and Fertilizing
You need to make sure it doesn’t dry out. Watering your natural turf is solely dependent on the temperature. After two to three months of installing a new lawn, it is recommended to carry out a regular fertilizing program..
https://aushenstone.com.au/
https://aushenstone.com.au/how-to-install-and-maintain-natural-turf/