American Laundry News - May 2014

MAY 2014

Late News Edison Laundry Corp. purchases Marriott NJ laundry facility EDISON, N.J. — Marriott International, worldwide operator and franchisor of hotels, has agreed to sell the assets of its N.J. Marriott Textile Services laundry facility here in Edison, the company reports.

The Bethesda, Md., company said in a statement that the purchaser, Edison Laundry Corp., will operate as Marriott International’s principal laundry supplier for the greater New York/New Jersey market under a multiyear contract.

Terms of the transaction were not announced.

Walt Disney World begins construction on new laundry plant LAKE BUENA VISTA, Fla. — Walt Disney World Resort has begun construction on a 130,000-squarefoot laundry facility due to open in 2015.

The company says the facility will “support the expansion of resort hotel rooms and accommodate adjustments in the type of linens used at the resort hotels.” It will be the fourth and most “technologically advanced” Disney laundry.

Around 400 new jobs will be created with the facility’s opening, with around 200 of them slated for roles like linen handlers, maintenance personnel and managers, according to the company.

ALN Volume 40, Number 5

Choosing chemical wash formulas: Accounting for changing variables key to good results

BY THERESA BOEHL, EDITOR CHICAGO — “The only constant is change,” the old saying goes. Laundry operators know this to be true, and when it comes to the elements that affect chemical wash formulas, change is especially ever-present.

While the four basic variables for achieving good cleaning results—processing time, water temperature, chemical action and the washer’s mechanical action—are mainstays, even they must make room for additional factors, both internal and external to an operation.

Finding the right mix of chemicals, resources and procedures is often a combination of careful orchestration and constant vigilance.

To help uncover the most important factors to consider when choosing a chemical wash formula, American Laundry News polled several vendors about changing chemical composition, new health and safety initiatives, and ways that a facility’s management and personnel can help or hinder wash-formula selection.

AN EVER-CHANGING WORLD

Jason Lang, director of RD&E Textile Care Division at Ecolab, says recent developments in laundry chemistry have been driven by scarce

(Photo: ©iStockphoto/justinkendrajustinkendra)

resources and restricted capacities, as customers are looking for formulas that use less water, fewer rinses and lower temperatures.

“Basically, wash formulas have changed to react to other changes in the market,” says

See WASH on Page 9

Annual ALM conference aims to tackle changing needs of industry RICHMOND, Ky. — Promoting education as a way to tackle the changing needs of the industry, the Association for Linen Management (ALM) will host its annual conference June 9-11 at the Saddlebrook Resort near Tampa, Fla. Conference sessions will focus on a variety of issues of interest to laundry/linen managers, such as customer relationships, managing staff, mergers and acquisitions in healthcare, new business opportunities and lean processing, to name just a few.

ALM says attendees will gain a greater understanding of healthcare reform, streamlining operations and ways to grow revenue.

The association’s biennial golf tournament on the morning of June 9 will benefit the ALM scholarship fund.

Awards for the 2014 Heywood Wiley Manager of the Year and Allied Tradesperson of the Year will be presented at a banquet and reception, which closes the conference on the night of June 11. Also planned is a presentation highlighting the association’s 75-year history.

The agenda includes:

Engineering, will present Making the Case for Lean Processing.

• 1-2:15 p.m. — Educational breakouts will feature Paul Fayad, of Positive Leader, as he discusses Succession Planning, and a speaker to be announced presenting Medicare Bundled Payments (BCPI Initiative) and Industry Impact.

• 2:30-4 p.m. — In the day’s general session, Brent Petty, CMRP, Wellmont Health System, will discuss The Affordable Healthcare Act and its impact on the

Monday, June 9 • 10-11:30 a.m. — In an educational breakout session, David Bernstein, Turn-Key

www.americanlaundrynews.com

INSIDE Panel of Experts Group offers tips for navigating staff communication issues.

0514aln_p01,09,17,19.FINAL.indd 1

Steve Tinker, senior vice president, Research & Development, Marketing at Gurtler Industries.

He lists polyester fabrics and new washing

See ALM on Page 19 The Newspaper of Record for Laundry & Linen Management

[10]

McGuire VA Plant Revamp

[15]

Virginia plant becomes first steamless laundry in a federal facility thanks to $8 million-plus renovation.

[16]

OPL 101: Wash Formulas & Equipment

Bill Brooks: Two most important factors for running an effective laundry are its equipment and wash chemistry.

4/22/14 8:16 PM

2 MAY 2014 | AMERICAN LAUNDRY NEWS

www.AmericanLaundryNews.com

Survey: Maintaining clean facility no-brainer for most laundry managers

Publisher

Charles Thompson Phone: 312-361-1680 E-Mail: cthompson@ americantrademagazines.com

Editorial Director

Bruce Beggs Phone: 312-361-1683 E-Mail: bbeggs@ americantrademagazines.com

CHICAGO — Maintaining a clean facility overall is a top priority for the majority of laundry/linen operators polled in April’s American Laundry News Your Views survey.

A whopping 83.3% of respondents say they perform all or most of these cleaning tasks every day: sweeping/mopping floors; disinfecting soil-sort conveyors/chutes; disinfecting washers; cleaning exhaust fans; wiping/vacuuming/blowing down equipment; and cleaning lint filters.

“We gather other people’s dirt for a living,” says one laundry/linen operator. “If we do not clean, we will drown in it.”

Of those who do not complete all of the listed tasks every day, cleaning lint filters was a top priority for 7.6% of operators, while wiping/ vacuuming/blowing down equipment was the most important cleaning task for 4.6%. The remaining respondents, representing equal shares of 1.5%, had their priorities spread among sweeping/mopping floors, disinfecting soil-sort conveyors/chutes and cleaning exhaust fans.

Less than half of the respondents—46.3%—post cleaning/maintenance schedules prominently in their facilities. For most respondents (73.2%), training on cleaning tasks is part of a new employee’s orientation.

“With the elevated rate of HAI [healthcare-associated infections] across the country and more stringent protocols in all aspects, cleaning and training play a greater role than ever,” says one laundry/linen operator.

So what is the best way to ensure that staff members complete assigned cleaning tasks? Nearly 45% believe it’s best accomplished by putting a team member in charge of confirming completion.

A smaller but still significant percentage (24.6%) say that demonstrating how cleaning benefits a facility is the most effective method. Others point to frequent training (10.8%) and threats of discipline (4.6%), while 15.4% listed “other” methods, such as using detailed check-off sheets, having daily discussions with staff, and having a designated employee do cleaning and repairs, to name just a few.

When asked for the primary reason that regular cleaning might not occur as needed, more than 50% of respondents say that timely production takes priority. Roughly 15% pointed to having a lack of time to complete the tasks, while almost 11% say having no team member in charge of tasks leads to a cleaning lapse.

For 7.7%, problems with cleaning arise when employees don’t under-

INSIDE: May 2014 • Vol. 40 | No. 5

[6] Tunnel Washers: The Answer to Rising Costs?

How is a tunnel different from open-pocket washers, and how can an operation benefit from this technology?

[8] Tools of the Trade [10] Panel of Experts: Language and Communication “In what ways could language differences impact our laundry operation?”

[13] Preview of TRSA Safety Summit

The third annual event will present strategies for achieving the best possible safety performance levels

[16] OPL 101: Wash Formulas and Equipment

Equipment and chemistry work hand-in-hand to help laundries operate at peak performance levels

[18] Trade Ticker [19] Calendar

0514aln_p02.FINAL.indd 2

Digital Media Director

Nathan Frerichs Phone: 312-361-1681 E-Mail: nfrerichs@ americantrademagazines.com

Editor

Theresa Boehl Phone: 708-280-1750 E-Mail: tboehl@ americantrademagazines.com

Production Manager Roger Napiwocki

Contributing Editor Jean Teller

Editorial Assistant Carlo Calma

Advertising Sales National Sales Director

Donald Feinstein Phone: 312-361-1682 E-Mail: dfeinstein@ americantrademagazines.com

Office Information

Main Phone: 312-361-1700 Fax: 312-361-1685

Subscriptions 630-739-0900 x100

www.americanlaundrynews.com

stand how it benefits a facility, and a little more than 6% say that high turnover makes it hard to keep staff properly trained. A small percentage (6.2%) listed other reasons, such as equipment breakdowns or falsified documentation, to name a few.

Just how important is cleanliness in maintaining a safe working environment? Almost 88% of respondents say it’s “extremely important,” and 10.6% deem it “somewhat important.” A small percentage (1.5%) disagree, saying it is “not at all important.”

While the Your Views survey presents a snapshot of readers’ viewpoints at a particular moment, it should not be considered scientific.

Subscribers to American Laundry News e-mails are invited to take the industry survey anonymously online each month. All managers and administrators of institutional/OPL, cooperative, commercial and industrial laundries are encouraged to participate, as a greater number of responses will help to better define operator opinions and ALN industry trends.

AmeriPride acquires Wood City Laundry MINNEAPOLIS — AmeriPride Services recently acquired Cloquet, Minn.-based Wood City Laundry, the company reports.

AmeriPride says it began supporting Wood City Laundry in late February after a fire, and began fully servicing the company’s customer accounts in early

March out of its Hibbing, Minn., branch and Duluth, Minn., service center under the leadership of Dave Hardy, general manager.

John Sutherland, AmeriPride senior vice president of operations, calls the acquisition a “nice fit” for the business and its new ALN customers.

American Laundry News (ISSN 1091-9201) is published monthly. Subscription prices, payment in advance: U.S. 1 year $39.00; 2 years $73.00. Foreign, 1 year $89.00; 2 years $166.00.

Single copies: U.S. $7.00; Foreign $14.00.

Published by American Trade Magazines LLC, 566 West Lake Street, Suite 420, Chicago, IL 60661. Periodicals postage paid at Chicago, IL, and at additional mailing offices.

POSTMASTER, Send changes of address and form 3579 to American Laundry News, Subscription Dept., 440 Quadrangle Drive, Suite E, Bolingbrook, IL 60440. Volume 40, number 5. Editorial, executive and advertising offices are at 566 West Lake Street, Suite 420, Chicago, IL 60661. Charles Thompson, President and Publisher. American Laundry News is distributed selectively to qualified laundry and linen management and distributors in the United States. No material appearing in American Laundry News may be reprinted without written permission.

The publisher reserves the right to reject any advertising for any reason. © Copyright AMERICAN TRADE MAGAZINES LLC, 2014. Printed in U.S.A.

MEMBERSHIPS

Association for Linen Management

4/22/14 8:10 PM

ALN_Full_Page

9/11/12

8:55 AM

Page 1

4 MAY 2014 | American Laundry News

www.AmericanLaundryNews.com

Polar Vortex no more I

hope this issue of American Laundry News finds you exchanging your parkas and thermals for more lightweight threads and, if you’re like my wife, opentoed shoes (just not in the plant).

It was a brutally harsh winter here in Chicago, as it was for most of the continental United States, but spring—not just the March date on the calendar, the honestto-goodness season of life—is finally here.

This brings to mind the need for spring cleaning, but I think the results of this month’s Your Views survey (story on page 2) demon-

From The Director’s Chair BRUCE BEGGS strate that cleaning is pretty much done routinely in the laundry industry, and that an extensive

new-season effort isn’t necessary.

Sweeping/mopping, disinfecting washers, and cleaning exhaust fans/lint filters are among tasks completed daily by nearly 84% of respondents. A near identical percentage believe that cleanliness is “extremely important” in maintaining a safe working environment. Perhaps next month’s TRSA Safety Summit will touch on the topic.

In whatever state you find your plant these days—a clean, safe one is my wish—I hope the arrival of spring has ushered in a sunny future for you and your staff. ALN

Boehl named editor of American Laundry News CHICAGO — American Trade Boehl joined the bimonthly Magazines LLC, the parent commagazine as editorial assistant in pany of American Laundry News, 2007 and worked her way up to has hired Theresa M. Boehl as editor, writing and editing stothe magazine’s new ediries; interviewing influtor, effective immediately. ential scientists, engineers She reports to Editorial and government officials; Director Bruce Beggs, designing page layouts; who has edited American and representing the pubLaundry News for the past lication at national and 14 years. international conferences While Boehl (proand meetings. nounced “bale”) assumes She also has online day-to-day responsibilediting experience, havBoehl ity for the magazine, ing served a year as staff Beggs will continue to oversee writer and managing editor of the publication while also directLoganSquarist.com, a hyperlocal ing sister publications American news website serving the Logan Coin-Op and American Drycleaner Square neighborhood of Chicago. and other editorial projects for Boehl has a bachelor of arts American Trade Magazines. degree in linguistics from the Most recently, Boehl was editor University of Michigan in Ann of Cold Facts magazine, a publiArbor; a certificate in technication of the Cryogenic Society cal communication from the of America in Oak Park, Ill. College of DuPage, Glen Ellyn, Cryogenics is a branch of physIll.; and a master of arts degree in ics and engineering that involves English from Northeastern Illinois extremely low temperatures.

University.

“In a short time, Theresa has shown a great capacity for learning the laundry and linen industry,” says Beggs. “She’s working very hard to familiarize herself with the issues and challenges that you managers face, while also identifying opportunities to expand upon our highly respected editorial coverage. I’m confident that American Laundry News is in good hands.”

“Our company is growing, and it was time for Bruce to release some of his day-to-day responsibilities to focus on our larger goals,” says Charlie Thompson, president and publisher of American Trade Magazines LLC. “Theresa is an excellent trade journalist who brings a fresh perspective to the coverage of our industry.”

“I’m excited to join the staff at American Laundry News,” says Boehl. “I look forward to the challenge of covering this dynamic industry and making contact with the people and companies ALN involved in it.”

Top Stories Appearing on AmericanLaundryNews.com for the 30 Days Ending April 15 (WE) = Web Exclusive

news

Columnists/Features

Our Sister Websites

• Gicewicz Assumes HLAC Presidency, Welcomes New...

• Examining What’s New in Textile Services Contracts

From AmericanDrycleaner.com:

• TCATA Preps for Annual Gathering

• Cintas Clears Up Top Hazard Communications Misconceptions

• La Quinta, Standard Textile Partner to Set Three World Records...

• Fashion Seal, Gurtler Team Up to Offer Processing ‘Best Practices’ • HCSC Names Taylor Hospital’s Holobowicz Linen Coordinator of Year

0514aln_p04.FINAL.indd 4

• Stepping Outside Comfort Zone All About Weighing Risk, Reward • Apex Linen Tech Investment Elevates Local Processing Standards

• Ozone Breathes New Life into Garments • The Magic in Your POS System (Conclusion) From AmericanCoinOp.com: • Maytag Fetes Top Distributors at 56th Annual Meeting • Parking: Make Your Case for the Space

COLUMNIST AT LARGE Eric L. Frederick, RLLD

Placing blame never hard to do I

can remember early in my career as a laundry supervisor having someone tell me this: “Happy is the man who can keep his head when all is falling down around him because he has found someone or something to blame for the problem.” I laughed and thought it was cute at the time, but over the last 40 years, I have learned the truth of this statement.

Sitting in a coaching session with an employee, I had to explain why I considered that individual’s performance lacking and what could be done to improve.

I made sure that I communicated the problems clearly and precisely. I was factual and careful to keep the discussion based on the employee’s output or work routine.

I took the extra time to ask follow-up questions about our discussion to make sure the employee understood what was said. Then I asked the person if he had any questions. I was surprised to hear him say, “Why don’t you like me? No one else has ever thought I needed to change. What is wrong with you?”

In the above situation, the poorly performing employee found someone to blame for his performance issues. By assigning the blame to their supervisors, employees have absolved themselves of all need to change and squarely put the blame on someone else.

Unfortunately, if they do not take personal responsibility for their own actions and productivity, they will eventually get fired.

But they will still have someone to blame, so their self-worth or personal ego remains undamaged.

I have visited a number of laundries over the years that were underperforming. Each manager was always quick to point out the “why” behind the poor performance—“I need to hand-fold too much linen” or “I lack the space needed to set up proper workflow.”

Perhaps it is an automatic feeder or a blanket folder that would be helpful in improving the throughput of the laundry. The line normally goes, “I could do so much better with this or that, but they will not let me have it.” Once again, the manager has a person or a situation to blame.

What needs to be done is to set the excuses aside and work on doing the best you can with what you have. If your performance as an employee is not measuring up, work on improving your performance.

Talk to your fellow employees and see how they can regularly beat your performance. Perhaps they have learned a trick or created a procedure that is faster than you are currently doing the work.

You will find that people want to help those who want to do a better job and improve their performance.

If you are a manager, do the best you can with the equipment and personnel you are given. Do not accept the current performance level as the best as it can be. Never tell your boss or your employees that the reason we cannot be as productive as everyone else is because of this or that. Employees will hear the reason and perform at a lower level because your statement has given them permission to do so.

As a manager, you have so many factors that you can control in almost any situation. You control the length of the wash formula, the amount you wash per load, whether you pre-sort or post-sort, the laundry chemicals you use, the amount you use, the type of linen you buy (high-cotton versus high-polyester), the number of linen items in your system, production standards, drying times, cool-down times, ironer speed, pre-shaking the flatwork items, or working directly from a cart. The list goes on and on.

All managers can fine-tune their operations based on their willingness and focus to do what is best for production. Small changes in one area may make a dramatic difference in another.

This fine-tuning process will not take place if you have already ALN found a person or thing to blame.

Eric Frederick is director of laundry services for Carilion Laundry Service, Roanoke, Va., and a past president and manager of the year of the Association for Linen Management. You can reach him by e-mail at efrederick@carilion.com.

4/23/14 9:29 AM

aDi DUraFiBer™ aDi ULtraFiBer™ aDi DUracLoth™ our newly enhanced ULtraFiBer™ “Foldover” design (patent pending) is first to market and best in class. these premium wet/dry combo mop pads efficiently deep-clean floors and baseboards at the same time. Premium hook & loop backing assures a ready to use product over and over again.

DUracLoth™ rounded-corner microfiber towels have a continuous-overlock edge design, for a no-fray, long-lasting neat appearance. the greatest benefits of a microfiber cleaning system come from using the proper cleaning techniques. ask us about the american Dawn microfiber total training Program!

10 Distribution centers across north america microfiber@americandawn.com

800 821 2221 americandawn.com

count on aDi... serious microfiber for serious cleaning.

ALN_Full_Page.indd 1

3/31/14 10:19 AM

6 MAY 2014 | American Laundry News

www.AmericanLaundryNews.com

Tunnel washers: The answer to rising labor, utilities costs?

By Theresa Boehl, Editor OSHKOSH, Wis. — For laundries looking to upgrade wash equipment, a continuous batch washing system (CBW®), also called a tunnel washer, might be an attractive option. But how is a tunnel system different from open-pocket washers, and how can a company’s operations benefit from this technology?

In Making Sense of the Tunnel, a recent webinar hosted by the Association for Linen Management (ALM), Seth Willer, national sales manager for Girbau Industrial, discussed the technology behind these systems and the advantages they can have over other systems in certain situations.

Willer also addressed the main driver for many companies looking to upgrade to tunnel washing systems: skyrocketing labor costs.

“I promise you the minimum wage will go up, and I promise you labor will get more expensive if you choose to operate your laundry in the U.S.,” he says.

Willer also points to the historical trend of replacing labor with technology.

“Technology is just increasing and increasing, and the laundry business is no different,” Willer comments. “We’ve aways had new technology emerging.”

WHAT IS A TUNNEL SYSTEM?

Willer says the textbook definition of a tunnel system is an automatic system with the capability to sequentially wash and dry batches of linen at a high production rate with great labor and energy efficiency.

Unlike a traditional front-load washer, which fills with water and drains with every wash phase, a tunnel washer’s phases occur as they move through various modules that are all connected to make one large system.

“To use a tunnel washer, you’ve got the same wash formula, but we’re doing it in a bigger configuration,” Willer says, explaining that a tunnel washer is like a series of open-pocket washers bolted together, Willer side by side. This configuration allows loads to be continuously moving through the system.

“You could have 10 different phases of the wash cycle and you could have 10 different loads all washing at the same time, just in different phases of your wash formula.”

CLASSIFICATIONS AND COMPONENTS

According to Willer, tunnel washers are typically classified by module capacity (in pounds of linen), by number of modules (usually ranging from around five to 20), by type of transfer (top or bottom), by existence of outer drum or by bath design or wash process. He listed the major components as a loading device (often a conveyor), the tunnel washer, an extraction device, an automatic shuttle and dryers.

There are two main types of tunnel wash-

0514aln_p06.FINAL.indd 6

ers on the market today: bottomtransfer and top-transfer tunnels.

Bottom-transfer tunnels provide mechanical action through what Willer calls an “Archimedean-type screw,” which runs the length of the tunnel and provides back-and-forth agitation before rotating fully so the linen flows into the next module, where it will be exposed to another element in the wash cycle.

Bottom-transfer tunnels are ideal for high volumes of like items, Willer says, but they tend to have less mechanical action and some other limitations as well.

“Bottom-transfer tunnels don’t tend to be all that flexible when it comes to changing programs, and that’s where your inner and outer drum is key,” he explains. The outer drum, which acts as housing for the inner drum, is what allows A 12-module Girbau Industrial TBS-50 continuous batch tunnel washer for change in wash programs, and Industrial) bottom-transfer systems typical“It’s a lot like stepping on a sponge,” he ly only have outer drums around a few says. modules in the system.

A centrifugal extractor, on the other hand, “But if you have a large operation where spins at 300 G-force, or 1,000 rpm, to extract all you’re washing are white towels, then a the water. bottom-transfer will work quite well,” Willer Willer says the key difference between the says. two types of extractors is cycle time, with But for those who need more flexibility in a press extractor getting the job done in 90 their programs, a top-transfer tunnel might seconds or less, and a centrifugal extractor be the better way to go, he says. Besides havtaking roughly 2-3 minutes. After extraction, ing an outer drum that runs the length of the a shuttle transfer conveyor transports the tunnel, allowing for inputs on any module, a laundry to the dryers. top-transfer tunnel also features drums with a more significant rotation, picking up linen ADVANTAGES and dropping it repeatedly.

“The two biggest advantages are labor and “An advantage of a top-transfer [tunnel] energy efficiency,” says Willer. He compares is you get good mechanical action,” Willer the production performance of a tunnel says. And that leads to the possibility of more washer system to a split-pocket, side-load flexible wash cycles, so wash formulas can be washer, which relies on manual loading of adjusted accordingly. linen into the washer.

“In a lot of circumstances, if you can With a split-pocket washer, an operator increase your mechanical action, you might can typically process anywhere from 250 be able to get by with washing in less water, to 400 pounds of laundry per hour, Willer or less chemical or detergent.” says, but thanks to automation, a tunnel But Willer is careful not to imply that system has a pounds-per-operator-hour rate a top-transfer tunnel is preferable for all of 1,500 to 3,000. operations.

“If you talk to operators that have switched “The top-transfer [tunnel] is becoming a from open-pocket to tunnel washing syspopular model, but there’s no real definite tems, the labor savings are astronomical,” answer because it’s all about what you’re Willer says, adding that the payroll costs for washing and how you’re washing it, and washrooms using a side-pocket washer can what design is most advantageous to you,” be as much as four times higher than those he says. using a tunnel system.

FEATURES There’s potential for significant water savWiller listed a number of features that ings as well, Willer says, because of the way are typically associated with tunnel washing that a tunnel reuses water for various cycles. systems: wash flow meters; auto-level drain “Your water comes into where your linen valves; automatic chemical injection; autois going to be the cleanest. It comes in your matic steam injection; computer controlled final rinse,” Willer explains. Then the water operation; on-board water reuse systems; flows “backwards” from later modules to and drain water heat recovery. earlier ones in the sequence.

The method of water removal is another With the help of storage tanks, water that key element of a tunnel washer system. is still fairly clean can be pumped to other Willer says there are two main ways to parts of the system and used in the pre-wash extract water after washing: a press extractor or wash cycles. or a centrifugal extractor. A press extractor A tunnel system will use anywhere from uses a large hydraulic cylinder to literally 400 to 1,200 pounds of fresh water per 1,000 squeeze the water out of the linen. pounds of linen, according to Willer, while

installed at Laundry Plus in Sarasota, Fla. (Photo: Girbau

an open-pocket washer might require 1,800 to 3,000 gallons for the same amount.

“That’s a massive savings, especially if you’re in an area where water is scarce,” he says.

Operating with a tunnel system can also result in hot-water and detergent savings, and it also allows for thermo-recovery options, according to Willer.

IS A TUNNEL SYSTEM RIGHT FOR YOUR OPERATION?

With any serious investment comes serious considerations, and Willer urges those looking into acquiring a tunnel system to take several factors into account.

For one, how tall is the facility’s ceiling?

Tunnel systems need a minimum 12-foot ceiling clearance for installation, though 14 feet is preferable, he says. And a plan for redundancy is also important. What will happen if a tunnel washer goes down?

The goods that will go through the system should be considered carefully, since upping production could mean bottlenecking in the flatwork area. Also, load type should not be overlooked.

“If you have water from a load of red tablecloths, you’re not going to be able to use that bath to wash white sheets,” Willer says. “So if you have small specialty loads, a tunnel washer or CBW® might not be right for you.”

Finally, consider the capital it would take to purchase such a large, complex piece of equipment.

“It’s a big piece of machinery, and it’s not something that you can just go out and write a check for,” Willer says. “It’s a big investment.”

He advises that companies do plenty of research before making a purchase, and be sure to benchmark production and decide on an acceptable return period for the investment.

“Find a dependable vendor. Visit their references,” he says. “I cannot stress that enough.” ALN

4/22/14 11:39 AM

RATHER THAN DEBATE WHETHER OR NOT TIME IS MONEY, WE’LL JUST SAVE YOU BOTH. On-premises laundry has to be done on time and on budget. And nobody saves more time and money than UniMac . Revolutionary UniLinc™ controls monitor your laundry’s performance, allowing you to pinpoint areas where you can increase efficiency, and reduce labor, utility and maintenance costs. Unprecedented 400 G-Force extraction and a spray rinse with 200% quicker fill time put even more money back in your pocket by further reducing operating expenses and maximizing throughput.

Industry-exclusive OPTidry™ Over-dry Prevention Technology introduces cutting-edge sensors that automatically stop the tumbler once the ideal dryness level is reached, saving up to $2,000 in utilities, $6,000 in labor costs and decreasing the need for linen replacement with 31% less fiber loss. These groundbreaking innovations combine with unmatched durability and performance to provide commercial laundries of all sizes with the absolute lowest cost of ownership in the industry. ®

Incredibly-low monthly payments and a 4.50% FINANCE RATE now available on new UniMac washers and dryers. Limited-time offer.

Contact an authorized UniMac distributor today to run a laundry operating analysis and see how you can cut costs and save money. Visit UNIMAC.COM/TIMEANDMONEY or call 1-800-587-5458.

ALN_Full_Page.indd 1 4723 UMac red_AmLaunNewsMay vF.indd 1

American Laundry News / May 2014 / 4c tab

Trim 10.75 x 14.5”

Bleed 10.875 x 14.625”

4/1/14 2:51 11:16PM AM

8 MAY 2014 | American Laundry News

www.AmericanLaundryNews.com

Tools f Provider of OPL equipment adds new 200-pound tumble dryer to product line UniMac has introduced the UT200, a new 200pound tumble dryer with extra-large capacity and an efficient, high-performance heater box. Sealed cylinder rims and a concentrated airflow pattern ensure no heat escapes, helping to keep utility costs down and to maximize productivity, the company reports. The self-cleaning lint screen enables fast, efficient lint removal from the tumble dryer’s large storage area.

UniMac also offers its Combustion Auto Response Equipped (CARE) system as an added option for the UT200. CARE monitors for excessive cylinder temperatures and sprays water on the load should it register an abnormally high reading.

A “system active” signal can also be sent to a property’s alarm system, laptop or another electronic device to notify the laundry or facility manager, according to the company.

The UT200 is equipped with the UniLinc™ control system, which enables operators to monitor data and performance indicators, and pinpoint areas where there can be increased efficiency or decreased operating costs that are associated with labor, linen replacement, utilities and maintenance.

Additionally, OPTidry™ over-dry prevention technology is offered as an option. OPTidry precisely monitors the level of linen dryness, according to UniMac. Baffles are used as sensors and provide pinpoint moisture readings throughout the entire load. When the tumble dryer has achieved the pre-set level of dryness, it shuts off automatically.

This eliminates inefficient energy use and reduces processing time, helping to lower both labor and utility costs. www.unimac.com/info 800-587-5458

Partnership brings extra-durable canvas-weave fabric to uniform/workwear programs UniFirst has formed a partnership with Wrangler Workwear™ to provide new options for customers of its managed uniform and workwear programs.

Now available from UniFirst are Wrangler Workwear shirts, pants, shorts and work jackets, which are constructed from extra-durable canvas-weave fabric for added comfort and mobility, UniFirst reports. The apparel also features inseam and underarm gussets, backside pleats, and action elbows, designed for maximum range of motion, even when bending, squatting, lifting or climbing.

In addition to features for unimpeded performance, all

UniFirst and Wrangler Workwear apparel is designed to project a more professional business image through premium design features like double-needle stitching, banded collars with permanent stays and wider belt loops, UniFirst says.

Adam Soreff, director of marketing for UniFirst, says the new Wrangler offering “nicely complements our UniFirst branded lines of apparel because both address the importance of providing active workers with workwear they can look forward to wearing, which ultimately translates into being more productive on the job.” www.unifirst.com/wrangler 800-455-7654

Variable-speed rotary screw compressors designed to offer sustainable energy savings Kaeser Compressors has introduced variablespeed-drive rotary screw compressors that deliver reliability, simple maintenance and sustainable energy savings, according to the company.

The SFC 30S and SFC 30 feature the latest in Siemens drive technology, and Kaeser says both models’ specific power has been improved by up to 6% through a combination of true direct-drive design, premium efficiency motors, lower internalpressure differential, and optimized airends.

The SFC 30S has a flow range of 37-171 cfm at 125 psig and is available with pressures up to 190 psig; the SFC 30 has a flow range of 47-202 cfm at 125 psig, with pressures up to 217 psig.

0514aln_p08.FINAL.indd 8

New features include an enhanced cooling design, eco-friendly filter element, integral moisture separator with drain, and an Electronic Thermal Management system, the company says.

The new compressors come standard with Sigma Control 2™, an intelligent controller with enhanced communications capabilities for seamless integration into plant control/monitoring systems.

Kaeser also offers the SFC 30S and SFC 30 with an integrated dryer for premium compressed-air quality. www.us.kaeser.com 877-586-2691

the Trade New washer-extractor uses high-G-force extraction speed to remove moisture IPSO® has added a new 275pound washer-extractor, the IS275, to its softmount on-premises equipment line. It was built to maximize productivity and minimize costs while providing superior wash quality, the company says.

The IS275’s high-G-force extraction speed removes more moisture from linens to increase efficiency and reduce drying times by up to 40%, according to IPSO. The standard inverter drive also smoothly transitions from wash to spin cycle to reduce machine downtime. These features contribute to increased throughput and can reduce utility consumption by up to 25%, the company says.

The washer-extractor does not need to be secured to a concrete foundation, allowing for relocation

and installation in upper-level laundries, and can be installed for sameday operation.

Other features include micro controls, an extra-strong door hinge, a large door opening and optional pneumatic tilting, IPSO says. www.ipso.com 800-872-4776

Vivid, high-def heat transfers apply to broad fabric range A new product from Penn Emblem Co. addresses some of the challenges that traditional emblems, screen printing or direct embroidery can present for performance apparel decoration, according to the company.

PennTrans™ Transfers are digitally printed in vibrant color, and the versatile, highdefinition heat transfers apply to a broad range of fabrics, including temperature-sensitive performance textiles.

They can be used to brand business casual wear and uniforms or to provide care/ content or personalized labels in a garment’s neckline or waistband. PennTrans digi-

tal heat transfers offer unlimited color capabilities and the ability to render exact details, and provide an alternative to direct embroidery or screen printing, Penn Emblem says. www.pennemblem.com 800-793-7366

Healthcare collection developed with industrial-strength fabric The Dickies® Occupational Wear division has added a healthcare collection for the textile rental market.

The new collection was developed specifically for the industrial laundry market, with industrial-strength fabric for extended garment life, the company says.

Features include adjustable waists on scrubs, task-driven pocket designs, and accents on scrubs, coats and jackets.

Customers can

choose from v-necks, classic lab coats, mock wrap tops and snapfront jackets, among others.

Also new from the Occupational Wear division are head-to-toe uniform products for the hospitality and foodservice industries, the company reports.

Strategic Partners is collaborating with Dickies to design, source and manufacture the new collection. www.dickies.com 800-336-7202

4/22/14 11:38 AM

AMERICAN LAUNDRY NEWS | MAY 2014

www.AmericanLaundryNews.com

Wash

Continued from Page 1

equipment technology as some recent drivers of wash-formula change.

Developing chemical wash formulas that increase longevity of merchandise and utilize lower alkali and bleach in wash cycles has been part of the focus at Norchem Corp., according to Kevin Minissian, vice president at the company.

For Steve Kovacs, R&D manager for P&G Professional, a number of changes in the last few decades stand out as notable: the phasing out of phosphates; the emergence and dominance of liquid form; increased use of enzymes and polymers to enhance cleaning; and a move from alkaline wash conditions to near-neutral, to name a few.

mula for each specific can create a problem.” classification.

There is also the issue “In general, simplicof employees choosing ity will also drive good shorter cycles, thinkPLAY AUDIO results,” advises Kovacs, ing it will lessen their saying that having too workload, according many choices is not cost-effective to Kovacs. And neglecting to do considering the additional inventopreventive maintenance on equipry costs, and that having too many ment can further affect the quality will increase the chances of forand cost, says Lang. mula mix-up. He suggests having CLASSIFICATIONS, a “detergent, bleach and softener.”

EQUIPMENT, FACILITIES But Tinker says that having a Opinions were mixed from wash formula for every classificathose polled on whether it is best tion will lead to increased efficiento have a few, broad-ranging cy, at least for a washer-extractor chemical wash formulas or a fortype of laundry.

He adds that in “a tunnel washer operation, it is difficult to modify wash formulas significantly, as these systems are best operated with a high-volume throughput of similar classifications to maximize efficiency.”

Lang calls choosing formulas for various classifications a “balancing act.” He points to each operator’s core competencies—what markets they serve and what they do best— as the most appropriate guide to questions of more vs. fewer formulas.

Formula development should take into account the specific con-

9

ditions and needs of each plant, Tinker says, such as in the case of a facility that is focused on cutting down processing time, or a facility that deals with high wastewater costs.

STAYING HEALTHY, GREEN AND CLEAN

Chemicals can have an impact on the environment as well as the health of the people who come into contact with them. The laundry industry continues to be affected by new requirements and See WASH on Page 17

WHAT ELSE MATTERS?

Making the most out of chemical formulas means paying close attention to what is being cleaned and how.

Soil-sort accuracy, load-size optimization, the linen’s fabric composition, and finishing capacity (folders, ironers, post-wash operations) are some key factors outside of the basic four that can play a role, according to Lang.

Kovacs adds other chemical considerations to the list, warning operators to think about, for example, whether using products from multiple manufacturers will result in harsh alkaline wash conditions that lessen linen life.

“One thing that people may not consider is quality,” says Tinker.

“There are … some laundries out there that have very, very high quality standards. And that can definitely affect your wash formula, [as] opposed to others who might have standard quality requirements.”

Regarding textiles, industry professionals find that they can present challenges for choosing wash formulas, since a move away from traditional cotton materials often means a new approach to getting textiles clean.

Synthetic materials are rising in popularity, but they’re more “oilloving” and “challenging to get clean,” according to Lang.

Kovacs adds that poorly woven fabrics often end up costing businesses more in the long run, and suggests that working with a reputable linen supplier is just as important as working with a good chemical supplier.

Staff members, too, can contribute to the effectiveness of a wash formula, whether they realize it or not.

“Sometimes employees select the wrong classification,” Tinker says. “They may not be paying attention … or they may underload or overload the washer, which ALN_Jr Page.indd 1

0514aln_p01,09,17,19.FINAL.indd 9

3/27/14 2:35 PM

4/23/14 7:22 AM

10 MAY 2014 | American Laundry News

www.AmericanLaundryNews.com

Panel of Experts

Solving language and communication issues Long-Term Care Laundry Brian Barfoot Aberdeen Village/ Aramark Olathe, Kan.

O

(Photo: ©iStockphoto/CurvaBezier)

ur industry, depending on the geographic location, has included a diverse cultural staffing model for years, but English as the second language has never been more prevalent than it is today.

It’s a challenge just like any other we face in the work environment.

An executed plan must prevail!

With communication always being the key to any successful business and/or relationship, the necessity of a leadership and financial commitment must be recognized first. In my experience, this commitment produces plenty of ROI for an organization and department. With that said, I would like to focus on the “resources available.”

To start with, we need a strategic plan for meeting and satisfying the growing communication challenges we encounter. Our modern-day workforce can easily

0514aln_p10-12.FINAL.indd 10

include a culturally diverse group whose origins include all parts of the world. At present, four different dialects from one continent plus one other foreign language are spoken within my department.

Here’s my strategic “Top Five” list of initiatives for success: 1. Utilize an internal or contracted interpreting service.

This helps avoid having an HR issue when department staff members act as interpreters for an employee training session or correctiveaction matter.

2. As much as possible, staff assignment should reflect a combination of “best fit” with best communication skills. In a busy work environment, speaking with our customers and being able to give them the reassurance through communicating that we’re taking care of them is critical.

3. Manager, supervisor, lead— whatever the titles of a department leadership team, ensure there is a consistent daily plan in place for providing a safe and productive work environment.

4. Consistency in on-boarding, training/development and continued competency review. It doesn’t matter what the language is, if this is missing, there’s no business being in business. Is there a documented, signed-off hiring and ongoing employee development protocol?

5. Recognize our No. 1 asset of the business: our employees!

Giving reassurance to recently immigrated staff members can make all the difference in the world to them and their families as they adjust to their new culture and world.

Of course, there can be more to consider, such as an HR department requiring a certain level of English-language competency, the interview process requiring the applicant to speak enough English without having to use an interpreter, and the possibility of providing a mandatory ESL class for employment.

•••••

W

ith regard to equipment, the impact starts and ends with employee safety, and brings into play all of the aspects of this topic in between.

“English is a second language for some of our workers. In what ways could this language difference impact our laundry operation? What resources are available to help me tackle language or communications problems within my staff?”

Equipment Manufacturing Gary Ostrum G.A. Braun Syracuse, N.Y.

Looking at OSHA code 1910.145, paragraph (c), it’s clear that employees must be trained on and made to understand the hazards referred to on safety signs of machines, regardless of what language they speak and understand. This OSHA code now gets matched with ANSI code Z535.4, which explains the proper formatting of safety signs on equipment to include key signal/international words and pictures.

So what operators are left with is that employees must be trained on and understand the safe operation of the equipment in the facility. They must also completely understand the safety signage and safety components, and the facility should keep accurate, updated records to show this training and understanding taking place on a regular basis, at the time of hire and at least annually thereafter.

Another issue operators face is elimination of the “grandfather clause” referring to existing equipment in a facility. For existing equipment and equipment being sold in the pre-owned market, the codes clearly state that if equipment is moved from its original installation location, the equipment must be brought up to all current safety components and signage. Secondly, if a piece of equipment is rebuilt or refurbished by the OEM (original equipment manufacturer) or a non-OEM rebuilder, the safety components and signage must be brought up to current code.

With these obligations now in place, when looking at the purchase of a pre-owned or rebuilt piece of equipment from a nonOEM rebuilder, due diligence should be taken to ensure the equipment meets the ANSI codes.

For existing equipment in a plant, if the OEM is still supporting a particular piece of equipment, they can be contacted to see if safety labels are available for the equipment.

Once the ANSI codes are met, it is now time to tackle the OSHA codes regarding employee training. The OEM may be able to provide assistance in this arena as well. If they are ISO-certified, they probably have formal and documented training protocol established and can be retained to provide such. At the plant level, seeking out bilingual employees to have them take part in training classes can work well and help reduce the cost of training employees.

From there, if bilingual support is needed for training activities, local colleges and universities may be able to provide a lower-cost service than dealing with a private party. What is important with all training activity is that the scope of training is clearly documented and retained, that the employees’ specific signatures are retained to show that they received and understood the training, and that the training is conducted on a regular basis.

•••••

E

nglish is tough to learn and understand. However, in my experience, the spoken English language has not been an issue.

4/22/14 10:53 AM

American Laundry News | MAY 2014

www.AmericanLaundryNews.com

Hotel/Motel/ Resort Laundry James Brewster, RLLD The Resort at Glade Springs Daniels, W.Va.

I have experienced a language barrier of another sort—concerning the deaf and mute—where an individual was unable to hear what I was saying or to communicate by speaking. This posed problems in certain areas, and trying to convey a message proved to be challenging at times.

What can someone do in this situation? I learned sign language through an interpreter over the course of six months to better communicate with my staff.

We also spoke through messages on a computer system using two connected laptop computers to type and read messages in real time; this service was provided as a courtesy by the West Virginia Division of Rehabilitation Services.

It was effective if we were having a meeting and could not have an interpreter available at that time.

Employees were also given training manuals to read over so they could get the basic functions of the position. We then gave them hands-on training so they could acclimate quickly.

For our efforts, our company was honored as “Employer of The Year” in 2012 by The West Virginia Department of Human Resources, Rehabilitation Services Division. It was a great honor and privilege to be recognized.

English cannot always be spoken, but there are other ways to communicate. Managers and co-workers have to have an open mind when dealing with language barriers and adapt accordingly.

things, manufacturers like Laundrylux have recognized that there are many people who speak multiple languages. Equipment that can display wash instructions in multiple languages can help to prevent potential problems in the laundry room.

Laundry rooms can display rules and regulations in multiple languages as well. This allows all members of the laundry staff to have similar understanding of the procedures in their workplace.

Breaking down any language barriers is key to operating a safe and efficient laundry.

Healthcare Laundry Michael Kirsch, CLLM HCSC Laundry Allentown, Pa.

T

he laundry industry has become a much more diverse setting than it was 20 years ago.

Plant locations and changing demographics in many regions of the country can attest to this fact. This has required us to make

changes in how we communicate not just basic information, but the entire gamut of information we use every day, in order to continue to be successful.

This starts with a newly hired employee and the training process. Over the years we have gleaned information, training materials, safety data, forms, contracts, etc., in multiple languages, depending on the workforce in each location. For any company, the key to success is conveying accurate and timely information to its employees.

Training videos for a multitude

11

of safety topics are critical in any healthcare laundry. Our training encompasses bloodborne pathogens and universal precautions, lockout/tagout, evacuation plans, MSDS, all company policies and much, much more. This all happens before an employee ever sets foot on the production floor.

In this information age, you can get these resources anywhere online; there are multiple sources.

While I am not recommending any one company, we use resources from Brady, Coastal See EXPERTS on Page 12

Equipment/ Supply Distribution Justin Oriel Garment Machinery Co. Needham, Mass.

C

ommunication among workers is key to running a successful laundry. If multiple languages are being spoken in a laundry room, it is important that the entire team understands the processes for running the laundry, regardless of the language being spoken.

Management needs to be sure that its team understands what is being expected of them as far as production, and that any language barriers are addressed before work begins. If there is a clear understanding of the tasks at hand, then any potential issues that might arise due to a “language misunderstanding” will be mitigated.

On the equipment side of

HEAVY-DUTY MACHINES. INDUSTRIAL-STRENGTH PARTNERSHIP. At Automated Laundry Systems, we deliver innovative solutions and expert resources to on-premises laundries throughout California. We’re focused on bringing you the most durable equipment that is built to perform—load after load. That’s why we partner with IPSO. Backed by more than 40 years of European ingenuity, the industrial ®

design and performance of IPSO make managing your laundry easier while improving efficiency. For a limited time, upgrade your laundry for as little as $99/month. Contact Automated Laundry Systems to get started today.

automated-laundry.com 428 N. Moss St., Burbank, CA 91502 • (888) 875-9556

ALN_Jr Page.indd 1

0514aln_p10-12.FINAL.indd 11

INDUSTRIAL

BY DESIGN

4/8/14 4:01 PM

4/22/14 10:53 AM

12 MAY 2014 | American Laundry News

Experts

Continued from Page 11

(now DuPont) and Grainger. We do annual retraining for some of the OSHA and HLAC criteria as well, and this is done through an online video training company called Mastery Technologies.

When the employee hits the production floor, there is another phase of training that is extremely hands-on. It is a basic “show and tell.” Safety of the employee and their co-workers is critical. There is signage in multiple languages everywhere. These are at entrance/ exit points, fire extinguishers, machine guards and pinch points, locations of hazardous materials or conditions, and the list goes on.

The most important button on a machine is the emergency-stop switch. Each new employee needs to have this basic information prior to feeding the first piece.

All of these things are “day one.”

Some plants have a “buddy system” that partners a seasoned employee with a new hire. This is usually the person next to the individual in any department who speaks the same language. The experienced person is shadowed for the first week or two to help the newcomer learn the ropes.

Additionally, we have found it helpful (though not required) to have bilingual supervision or lead personnel. Many times, written instructions and direction are in specific terms. This has been helpful, because there are many dialects in any language.

Plants that don’t have bilingual supervision should have at least one or two designated translators per shift. We have also done classroom work and offered tuition reimbursement for supervisors willing to learn another language.

Basic words and phrases spoken in another language go a long way toward maintaining a good, safe work atmosphere. This helps to solidify the message regarding whatever the job requirement may be.

All production reporting forms have been converted to multilanguage forms for the ease of the employee to record, as well as the supervisor to report, daily results.

Most of the time we are dealing with numbers, which is a much more universal language.

Commercial Laundry Richard Warren Linen King Conway, Ark.

W

henever there is poor communication, there will be adverse or negative consequences. There must be a way

0514aln_p10-12.FINAL.indd 12

www.AmericanLaundryNews.com

to communicate among staff, regardless of what language is involved. It could be lip reading, sign language, Spanish, or one of the Asian languages. Most colleges have a department that can help with interpretation of documents, and the Internet can help as well. Larger cities have translators or interpreters.

Of course, the best way to communicate with employees is to speak their language, and an alternative to that is to have a person in a responsible position who will translate for you.

Simple pictures posted in strategic places can be helpful as well.

Language is one issue, but cultural differences can be a barrier in relaying information.

For instance, we as managers may simply see someone as a “woman” or an “older worker,” but those from other cultures may see a “mother” or “elder” and naturally defer to that person’s station in life.

Then there are those who do not feel comfortable being supervised by women. These are not necessarily negative qualities, but the outcome can be negative if the manager doesn’t recognize the situation.

Language barriers can make it difficult to project expectations without offending or misleading the employee. My wife and I speak the same language, but sometimes one of us is offended when the other assumes the request was not understood and continues to explain what needs to be done.

I feel strongly about making all instructions simple to require as little thought as possible.

The tasks that are simple have a greater chance for success than the ones that have multiple layers and options. Remember, we hired these workers and we are paying for their time. We owe it to everyone to help them be as successful as possible.

Uniforms/ Workwear Manufacturing Scott Delin Fashion Seal Healthcare Seminole, Fla.

T

oday, in order to run a successful and profitable business, good communication skills are a must. These skills are expressed either verbally, by signage or by colors. More and more members of our laundry workforce today either do not speak English, or consider English their second language and means of communication. This, more often than not, can make it challenging for management to communicate to the workforce concerning quality, productivity and, most importantly, employee safety.

As owner/operators and/ or managers/supervisors, we

approach work every day and expect our employees and workforce to give us 100% effort.

In order to achieve this goal consistently, it is important that we communicate well with each other.

If our employees do not understand what is expected on a consistent basis, shame on us for not communicating the message by any means possible. Not conveying our message clearly will have a negative impact on the quality of the product going out the door to our customers.

Poor communication leads to poor productivity, inferior quality and, unfortunately, at times an unsafe work environment that can lead to serious injuries and, in some cases, some hefty workers’ compensation claims.

Our workforce today is more non-English-speaking than ever, which can create some serious challenges to all. It is important that we take the necessary steps to ensure our message is communicated properly to our employees. Companies today are taking multiple steps and reaching out to various resources to implement special practices to ensure good communication is rampant in their place of work.

Some may include: • Hiring of tutors to teach English to non-Englishspeaking staff during breaks or after hours.

• Hiring tutors to work with management to teach them the foreign language needed to communicate effectively with employees.

• Working with Human Resources to place proper signage in dual languages and with pictures to get the message across to employees.

• Making sure the lead person or supervisor in charge is fluent enough in the secondary language to communicate to employees what needs to be done, such as job expectations and tasks at hand.

Garment manufacturers and machinery suppliers are also helping overcome language barriers. Machinery suppliers are manufacturing equipment with proper signage to display the do’s and don’ts of proper operating procedures, while garment manufacturers are offering to produce color-coded apparel and uniforms that will help employees identify specific sizes and styles. This color coding can be done several ways: neck labels; neck tape or binding; twill tape; or the fabric itself.

By taking the time to teach and work with our workforce and our suppliers, together we can overcome the communication challenges and make the language barriers go away in the wash.

Consulting Services

may be in question. It may surprise you to actually see how easy it is to comply with the law.

Sam Garofalo

Textiles

Technical Consulting Associates Charlotte, N.C.

Hal Herweck

T

his is a tough subject, and although the question is posed in a politically correct manner, it is ignoring the elephant in the room. It’s the new face of America! The language is Hispanic, the people are Hispanic.

Some are in the country illegally, many are not. The issue as presented is one of communications.

My personal feelings regarding the immigration laws are irrelevant, my opinions for my clients are based on getting the job done, nothing more!

Personally, I think Hispanics make up a welcome and needed workforce. They’re exceptionally hard-working and industrious.

They will do what the entrylevel English-speaking jobseekers will not do. Their work ethic is reminiscent of that in the stories told by the old Irish, Polish and Italians who came to this country in the early 1900s for a better life.

Let’s face it—if there wasn’t a need, they wouldn’t have come here.

The Spanish-speaking workforce is estimated to be more than 75% of the production employees in today’s mid-sized and mega plants located in populated areas.

That being said, one of the methods that has been proven to successfully assimilate this powerful workforce into the system is to let them have some control.

The most successful plants have a bilingual supervisor or plant manager. These trusted bilingual leaders will take control of the staff and, under the direction of the owner or general manager, direct the people. These leaders, when instructed properly, will organize their people, put the right people in the right jobs and protect you from the usual problems seen on the production floor.

They will not only direct, discipline, fire, replace and do anything that is required of them, they will get the job done. These people are self-motivated and self-disciplined. This approach is extremely effective and successful in plants just like yours across the country. The Hispanic people, as a whole, take great pride in their work and want to get the job done right. They will work 12 hours a day and longer if needed. They expect others to work as hard as they do and will take each other to task if they don’t produce.

Upper management must be fully aware of laws regarding the employment of any people who

Phoenix Textile Corp.

O’Fallon, Mo.

T

his is a timely, yet difficult topic to express an opinion about. I think it not only affects us in our work environments, it affects us in many other situations.

I called my bank several weeks ago and it took me forever to understand what the “customer service” person was saying to me.

She, likewise, had a difficult time understanding my inability to get my thoughts across to her.

As I was mumbling to myself, I remembered when I was in Germany trying to tell the lady in the “Apotheke” (they don’t use “drugstore”) that I needed something similar to aspirin, and the shoe was on the other foot.

I am reminded of one of my VA laundry manager friends who told me about having several people who worked for him who all spoke different languages. He had three language groups to deal with, and two of those three did not speak a common language.

He worked hard at learning how to talk to each of them in their native tongue. Then he helped them learn some work-related terminology so they could do their job.

I sat one afternoon in the lunchroom with all of them and listened to the chatter between half of the laundry. Everyone was speaking his/her own language but at the same time understanding what the others were saying.

After lunch, I told him I didn’t understand a word that was spoken, but I did pick up on when to laugh along with the rest of the crew. He chuckled and told me they were laughing at me. Why? Because my head was turning from side to side as I tried to be a part of the discussion and they were telling each other I didn’t know what was going on.

I admire my laundry manager friend for working so hard to learn enough of the other three languages to be able to communicate with the people who work for him. I know I am wrong in not doing the same. I still speak only English. However, I am working on learning a second language.

So if anyone wants to speak a little German to me, please do, but I only have a few words down pat. Wo ist der Getränkeautomaten? Wo ist die Toilette? That’s the best I can do, ALN but I am working on it!

for more stories featuring our panel of experts, visit www.AmericanLaundryNews.com!

4/22/14 10:53 AM

American Laundry News | MAY 2014

www.AmericanLaundryNews.com

13

TRSA Safety Summit calls for better industrywide practices ALEXANDRIA, Va. — An upcoming Textile Rental Services Association (TRSA) event seeks to pinpoint the issues that prevent laundry managers from achieving the best possible safety performance levels.

TRSA will host its third annual Safety Summit on June 18-19 at the Omni Nashville (Tenn.) Hotel.

Its Safety Committee has planned discussions that focus on creating a “safety culture” in the industry, aiming for reduced incidents and injuries through “novel approaches.” The event is presented in cooperation with the CSCNetwork (The National Alliance of Independent Launderers).

According to TRSA, too often managers work primarily toward compliance and requirements, rather than employing new strategies and techniques for ensuring safe workplaces. The Summit will help identify obstacles and develop consensus proposals for dealing with them, the association says.

Safety and health professionals from inside and outside the industry will present practical information designed to reduce workplace illnesses and injuries.

Members will share concepts that can improve safety by 20-40% compared with the industry as a whole, says TRSA, and attendees will work together to develop practices to “increase protection, productivity and profitability.”

The Summit is designed for owner-operators; corporate executives; general, plant, production, engineering and safety managers; and others responsible for safety, health and human resources, according to the association.

TRSA is also offering nine credit hours toward recertification to individuals who have achieved TRSA’s Certified Professional Laundry Manager credential.

The Summit opens with a welcome reception beginning at 4:30 p.m. Wednesday, June 18 (registration will open at 3).

Activities on Thursday, June 19, will begin at 7 a.m. with a breakfast and welcome by Joseph Ricci, TRSA, and Jamey Cashman, CSCNetwork, along with an update by Rick Gerlach, chairman, TRSA Safety Committee.

Sessions will run from 7:45 a.m. to 5 p.m. and include several “best practices” breakout sessions: • 7:45-8:30 a.m. — Fostering Communication, Ensuring Engagement is the focus of a presentation by John Eapen, VP, Environmental, Health and Safety, American & Efird (A&E), in the day’s first general session.

0514aln_p13.FINAL.indd 13

• 8:30-9:45 a.m. — Speaker Don Bock, owner/operator, Seabright Safety Solutions, will discuss Behavioral Safety.

• 10-11:15 a.m. — Concurrent breakout sessions begin with a panel on Using Telematics to Monitor Driver Safety.

Scheduled panelists are Eric Davis, AmeriPride; Dan French, G&K Services; and Rob Potack, Unitex. 9:58 Rich AM ALN_Jr Page 5/2/12 Gerlach, Cintas, will be mod-

erator. Dealing with the Aging and Obese Workforce will be presented by Lance Fredericks, Zurich Services Corp., and moderated by Terry Drake, G&K Services.

• 11:30 a.m.-12:45 p.m. — In the second set of breakout sessions, Jim Flanagan, assistant administrator, Tennessee OSHA, will present Securing the 1Coveted VPP, while a repPage resentative from Travelers

Insurance will present How Situational Awareness Improves Safety, moderated by Charlie Edelman, Unitex.

• 1:30-2:30 p.m. — Afternoon general sessions will begin with Safety in the Commercial Laundry Industry by Edwin Foulke, Fisher & Phillips.

• 2:45-3:45 p.m. — Bruce Thomas, manager, Health and Safety, UPS East Region, will present Fleet Safety Training:

How UPS Trains its Drivers.

• 3:45-5 p.m. — Activities close with a panel discussion on Textile Services Executive Management Perspectives.

Panelists are to include Jim Buik, Roscoe Co.; Jim Butz, Clothes Clinic; Ed Heilman, Ace Imagewear; and David Struminger, Mohenis Services.

To learn more about the event, or to register, visit www.trsa.org/ safetysummit.

ALN

Notice Anything?

InkGo Is Now Odor Free! ®

InkGo has been reformulated to remove its odor… and to improve its performance.

It's still the environmentally friendly,* safe way to remove ink stains from all types of fabric. It’s still great at removing autoclave tape and adhesives.

And since it’s odor-free, it’s more pleasant to work with.

Now that's worth noticing!

*InkGo is Biodegradable and is California Prop-65 and California VOC Compliant.

To Learn More, Visit ALWilson.com or call 800-526-1188

°Ê °Ê7 -" Ê Ê "°ÊUÊ i>À Þ]Ê ÊäÇäÎÓ

4/22/14 10:46 AM

14 MAY 2014 | AMERICAN LAUNDRY NEWS

www.AmericanLaundryNews.com

Career Myers joins B&C Technologies sales team PANAMA CITY, Fla. — B&C Technologies has hired Sonny Myers as sales manager to further expand its local client base, the company reports.

Myers brings more than 30 years of industry experience through owning and operating two successful Myers laundry/warewash chemical and equipment companies, B&C says. His vast experience will allow him to assist clients when making purchasing decisions, the company adds.

B&C says Myers is well known as a community leader through his volunteer work with charitable events and non-profit organizations.

“We are excited about adding Sonny to our sales team,” says Al Adcock, B&C vice president of sales and marketing. “His wealth of experience will allow us to expand our efforts and better cater to our local market.”

“It’s great to be part of the team here at B&C Technologies; their professionalism is unsurpassed in the laundry equipment market,” Myers says. “I’m proud to a representative of B&C Technologies, knowing our customers will have the best!”

G.A. Braun hires Tippett as project field supervisor SYRACUSE, N.Y. — G.A. Braun reports that it has hired Robbie Tippett as project field supervisor on its Inside Sales & Project Management Team.

He will be responsible for coordination activities within Braun’s

ALN_Tab_1-4_H.indd 1

0514aln_p14.FINAL.indd 14

organization between engineering, manufacturing, logistics, sales and service.

He is also responsible for interfacing Tippett directly with architects, electrical and mechanical contractors, installation/rigging contractors, utility systems engineers and Braun’s customers throughout the lifecycle of a project.

Over the past 35 years, Tippett has served in a variety of operations, sales and service roles within the commercial laundry industry, Braun says.

Most recently, he was a managing partner with T&C Rigging and had responsibility for the execution of countless equipment installation projects throughout the United States.

Previously, Tippett was with the WJ Tippett Co. in Maryland for more than 27 years in the capacity of equipment sales, installation and service.

“We are extremely excited to have Robbie joining Team Braun.

I am confident that Robbie will further strengthen … our ability to develop solutions for our dynamic customer base and support our strategic growth initiatives,” says Cliff Quick, Braun’s director of inside sales and project management. “Robbie possesses a wealth of knowledge, not only with Braun equipment, but with the laundry industry that we support.”

Berge returns to American Laundry Systems staff HAVERHILL, Mass. — American Laundry Systems, a division of E&O Mechanical, has welcomed Charles Berge back to its staff as vice president of sales.

The 34-year industry veteran

Track

originally joined the company in 2004, working with President and CEO Gerard O’Neill to gain experience in laundry design and facility renovations in the healthcare, industrial, food and beverage, hospitality and cruise line laundry operations.

Berge will now oversee ALS’ consulting, engineering and installation services throughout North America.

He got his start in the industry in 1980, spendBerge ing 16 years with Aramark Uniform Services, holding several positions ranging from route representative to general manager.

He has also worked for Brim Laundry Machinery, Dallas, learning the capital equipment side of the industry while covering a Midwest territory of 10 states.

Most recently, Berge spent two years with Venus Group, covering the U.S. Midwest and Canada for the textile company.

Berge has been an instructor at TRSA’s Production Management Institute and Maintenance Management Institute.

Delin promoted to VP of sales at Fashion Seal SEMINOLE, Fla. — Fashion Seal Healthcare, a brand of Superior Uniform Group, recently promoted Scott Delin to vice president of sales, the company reports.

Delin will lead the development of programs and training for laundries and healthcare facilities, according to the company, offer-

ing customers “technologyappropriate, cost-effective and efficient solutions to promote business growth.”

Delin has been with Fashion Seal Healthcare since 2004, having recently held the position of senior national healthcare market executive. With 30 years of experience as a laundry operator, Delin has extensive background in apparel production and the textile industry, the company says.

He serves as a board member for the American Reusable Textile Association (ARTA) and for the Textile Rental Services Association (TRSA), where he is also a member of its Healthcare Committee.

Delin is also a member of the Healthcare Laundry Accreditation Council’s (HLAC) advisory committee, and the American College of Healthcare Executives.

“Scott Delin’s background of garment manufacturing and commercial laundry operations gives him a unique perspective in the healthcare laundry marketplace,” says Alan Schwartz, president of Superior Uniform Group, parent company of Fashion Seal Healthcare.

“His experience allows him to add great value in a consultative role to his customers Delin that exceeds their expectations in a changing healthcare landscape.”

Delin has a bachelor of science degree in textile and apparel management from Philadelphia University.

Maytag Commercial Laundry welcomes Smith, DeJong ST. JOSEPH, Mich. — Maytag Commercial Laundry recently welcomed Dawn Marie Smith as marketing manager and Eric

DeJong as senior product manager, the company reports.

Prior to joining Maytag, Smith worked in a variety of roles in sales, brand, merchandising and product Smith development, most recently at Whirlpool Corp.

In her new position, she will lead the Maytag Commercial Laundry brand strategy, development and execution of public relations and key influencer strategies, the company says. Smith has a bachelor’s degree from Western Michigan University.

DeJong joins Maytag Commercial Laundry after 12 years in residential brand marketing, product category DeJong management, professional sales and sales enablement at Whirlpool, most recently serving as the company’s brand manager.

He has also served as a product category manager for top-load washers.

In his new role, DeJong will be in charge of all Maytag Commercial Laundry newproduct development. He holds a bachelor’s degree from Calvin College.

“Dawn and Eric are proven leaders who will help us grow our business through their strategic product and marketing efforts,” says Bob English, general manager for Maytag Commercial Laundry.

“With extensive industry-related experience, we are better poised to support our customers and our robust commercial laundry product portfolio.”

ALN

7/16/13 3:58 PM

4/22/14 10:32 AM

American Laundry News | MAY 2014

www.AmericanLaundryNews.com

15

McGuire VA Medical Center revamps textile care plant RICHMOND, Va. — The Hunter Holmes McGuire VA Medical Center here has overhauled its textile care processing facility, which cleans millions of pounds of laundry for the medical center and nearby hospitals and military bases.

The plant’s refurbishing makes it the first steamless laundry in any federal facility, according to Western State Design, which partnered with R.W. Martin & Sons to complete the project. Cost of the renovation exceeded $8 million.

Major changes and additions were unveiled during a March 13 grand opening. Attendees toured the renovated facility after a ribbon-cutting ceremony led by Albert Boyd, textile care manager of the McGuire VA Medical Center.

“We went from the stone age to the 21st century,” says Bruce Jensen, a member of the VA Quality Assurance team.

The new facility features automated equipment to replace manual processes, and ergonomic equipment designed to reduce the impact of repetitive motion for employees, Western State Design says. The new equipment is designed to save time, energy and water. It will be used to process laundry and uniforms for the McGuire VA and will also process soiled linen from Joint Base Langley–Eustis, Camp Peary, Fayetteville North Carolina Military Bases, Fort Eustis, Fort Lee Military Base and Hampton VA Medical Center.

“After touring the plant today, it is obvious that this accomplishment by Western State Design and R.W. Martin is in fact an engineering marvel of its own,” says Ken Tyler, former long-time director of Textile Care Operations at the Department of Veterans Affairs.

Newly installed equipment includes an E-Tech soil overhead semi-automatic monorail conveyor system with five storage monorails; a Milnor six-module, 150-pound-capacity continuous batch washer with PulseFlow technology; a Milnor single-stage, 56-bar press/extractor; and four 300-pound Milnor dryers.

Additionally, the plant renovation includes a 600-pound Consolidated natural gas dryer; two Century two-roll, 52-inchdiameter self-contained thermal ironers from Chicago Dryer Co.; and a Colmac Industries steamless self-contained garment tunnel finisher, among other new pieces of equipment.

The facility will also make use of three Milnor 100-pound washerextractors and three 120-pound

Cissell dryers, which will accommodate smaller loads of uniforms, rewash and specialty linen. All of the laundry equipment installed was made in the United States, according to Western State Design.

Newly revamped features of the building are the interior mechanical plumbing and electrical systems, an air handling system, and the clean- and soiled-linen production areas, which are now separated by a glass barrier.

Officials cut the ceremonial ribbon at the McGuire VA Medical Center textile care processing facility: (from left) John A. Brandecker, director, Richmond VAMC; Albert H. Boyd, textile care manager, Richmond VAMC; Gus Davila, deputy network director, VISN 6; Steve Parrish, program manager, Textile Care, VACO; Daniel Hoffman, network director, VISN 6. (Photo: Western State Design)

Man does not live by print alone.

(Nor woman either.) American Laundry News can now be viewed on tablets and other mobile devices – great ways to stay on top of the latest industry news and updates. www.americanlaundrynews.com

The Newspaper of Record for Laundry & Linen Management

ALN_Full_Page.indd 1

0514aln_p15.FINAL.indd 15

Western State Design furnished the equipment for the renovation, and R.W. Martin & Sons completed the installation. The original laundry installation occurred in 1977, and the conventional equipment replaced in this latest renovation was installed 1991.Full page, bleed ad for American Laundry News “Printin Alone“ American to Trade Magazines Contact: Charlie Thompson 312-361-1680 “It’sAdvertiser: just amazing seeAd how Trim size: 10.75” x 14.5” contact: Shelley Timm-Thompson, 708-771-9948 far the systems Art have advanced,” Insertion Date: Ongoing says Anthony Tura, another member of the VA Quality Assurance team.

ALN

11/11/13 2:23 PM

4/22/14 10:28 AM

16 MAY 2014 | American Laundry News

www.AmericanLaundryNews.com

OPL 101

Wash formulas and equipment: some key considerations

By Bill Brooks Every on-premises laundry manager knows that running an efficient, effective laundry is a team effort, and that the two most important players are equipment and wash chemicals. When considering the best method to get linens clean, be aware that laundry technologies and sustainability are as important as choosing the wash formula that best complements your equipment.

A PROVEN FORMULA

Partnering with the right chemical company is key to creating the perfect wash formula. Companies like Ecolab, which specializes in water, hygiene and energy technologies, make the process easy for all parties involved.

“Our job becomes effortless when we partner with a company that knows the throughput and efficiencies of their machines,” says Jim Mitchell, lead technical service specialist at Ecolab.

linens is oftentimes classified as an exact science. Wash formulas are fine-tuned according to temperatures in use, soil types and linens being cleaned, but they do the best job when partnered with washer-extractors that feature the technologies and programming capabilities that can also be tailored to different load types.

In some markets, such as hospitals, the laundering process is often regulated by state or local health departments, or by accreditation agencies. These organizations may require specific wash formulas, temperatures and chemistries used in the laundry operation to produce “hygienically clean” linens, including EPA-registered laundry products.

“Whenever possible, work to find a ‘happy medium’—one that satisfies health departments and chemical companies, while at the same time reducing energy costs and providing clean linens for customers,” says Mitchell.

IMPORTANCE OF A DETERMINING THE BEST ALN_Jr_half 10/4/12 2:30 PMWIRELESS Page 1 NETWORK

Ensuring the ultimate in clean

Some state-of-the-art laundry

control systems allow for wireless networking that makes programming wash chemistry seamless. With wireless networking, machines do not have to be reprogrammed. Rather, wash formulas are already included as a key component in the installation of new equipment. Networking also allows chemical companies to program laundry machines efficiently from a laptop versus manually programming the machine, a process which can take several hours.

and hospitals also pose a risk and can cause skin irritation if not addressed by proper rinse methods.

Unlike bath rinses, which only dilute wash chemistry, unique spray rinse technology pulls chemicals through the load and down the drain. Spray rinse technology not only decreases the presence of residual wash chemistry, it also decreases cycle rinse time by up to 12%, which increases throughput and decreases water consumption.

the extra water removed by a highG-force machine can reduce drying time by 30%. Super-high G-force (300-plus) is the single greatest factor in reducing energy consumption in a laundry.

FINAL CONSIDERATION

When it comes to final wash quality, the most important consideration is matching the right chemical and wash program for the items being laundered. The ability of the wash equipment to have unlimited flexibility and ease of programming, along with efficient technology like spray rinse and wireless networking, assures the quality results are matched with the best throughput and ALN efficiencies.

STATE OF THE ART

A FORCE TO BE RECKONED WITH

Another new equipment feature that maximizes the life of linens is spray rinse technology, which leaves up to 22% less residual wash chemistry in the load compared to machines that utilize bath rinses alone. When chemicals remain on linens during the drying process, the heat will cause them to yellow or gray over time.

Additionally, the residue can cause linens to become stiff and rough, which negates the purpose of the original linen investment.

Chemicals left in linens that are used by long-term care facilities

To further reduce the possibility of wash chemicals remaining in linens during the drying process, consider investing in a washerextractor with 400-G-force extraction, which will remove the maximum amount of final rinse water from the load.

Purchasing a washerextractor with high-Gforce extraction will also help to decrease drying times and labor and utility costs. When comparing 100-G-force washers and Brooks 300-plus-G-force washers,

Bill Brooks is national sales manager for UniMac®, a provider of on-premises laundry equipment. He can be reached at bill.brooks@ alliancels.com or 920748-4437. To learn more about UniMac, visit www. unimac.com/OPL101.

2%!3/.3 4/ #(//3% 0!2+%2 "/),%2

"%44%2 %.').%%2%$

"ETTER %NGINEERED

Since 1919 Parker boilers have been engineered for more efficient operation (whether gas, oil, or combination gas/ oil fired) for delivery of hot, dry steam in less than 10 minutes. And Parker boilers have a longer service life for a greater return on your investment.

"ETTER $ESIGNED

Parker boilers are designed for ease of routine maintenance, annual inspections, and on site repairs, so there is less down time, more reliability.

Parker boilers also have extra heavy, insulated, double-wall steel cabinet construction (Stainless steel cabinet lids and/or sides available).

"ETTER 0ACKAGED

All Parker boilers are delivered complete, ready to connect to utilities. What’s more, every boiler is test fired before it leaves the factory so you can count on getting up and running as soon as possible.

Kompact mounted return systems are available on 3 to 25 hp boilers to save on installation costs.

6ALUE "ETTER

All of Parker’s superior quality boilers are available at competitive prices and have been distributed through our regional representatives for over 60 years.

3TEAM "OILERS

)NDIRECT 7ATER (EATERS

&ROM (0

&ROM 'ALLONS PER (OUR 2ISE

3TEAM "OILER !CCESORIES

4HERMAL ,IQUID (EATERS

&EED 3YSTEMS "LOW /FF 4ANKS 7ATER 3OFTENERS #HEMICAL &EEDERS

&ROM TO "45

Parker boilers are UL or ETL listed and ASME and NB registered. All our Low

Parker boilers are UL or listed and NOx models areETLcertified ASME and NB registered. All our Low to SCAQMD Rule 1146.2 NOx models are certified to SCAQMD requirements.

Ruleemission 1146.2 emission requirements.

0ARKER "OILER #OMPANY "ANDINI "OULEVARD ,OS !NGELES #!

0HONE &AX WWW PARKERBOILER COM ALN_Jr_half.indd 1

0514aln_p16.FINAL.indd 16

2/6/14 9:12 AM

4/22/14 3:40 PM

American Laundry News | MAY 2014

www.AmericanLaundryNews.com

Wash Continued from Page 9 regulations for safe chemicals, and efforts to keep up are ongoing.

Minissian says that Norchem, like most chemical suppliers, is focused on developing environmentally safe products and practices following recent health/safety and green initiatives. He mentions fully automated chemical dispensing systems as one way to prevent chemical exposure.

“Sustainability initiatives have certainly made their mark,” says Kovacs. “As noted already, phosphates are phased out and certain manufacturers have compacted detergents, thus shipping less water, using less packaging, [and] all in all reducing [their] carbon footprint.”

“When we’re trying to develop a new detergent, we are trying to use the latest technology that’s available that we know will have the most minimal effect on the environment,” says Tinker.

An added push toward greener formulas is the phasing out of nonylphenol ethoxylate (NPE) in detergents. The Textile Rental Services Association (TRSA) has been collaborating with the EPA

on efforts to eliminate NPE from detergents by 2015.

But where are detergents, and in turn, chemical wash formulas, left without this key ingredient?

Minissian says the “quality has remained superior with or without” NPE, already phased out of his company’s detergents.

Lang, however, hesitates to deem NPE-containing and NPEfree detergents equal in every case.

“No single surfactant has been found to be an adequate one-toone replacement for NPE surfactants,” he says, adding that soil level and soil type “have a way of differentiating detergents and the components that are within them.”

But in most applications, NPEfree detergents are effective, he says, though considering the overall wash process can help identify better soil-removal methods.

Also, pre-made surfactant blends that match the properties of NPE surfactants are being produced by major chemical suppliers to meet soil-removal needs, according to Lang.

With regard to alternatives, Kovacs says that “there are many other surfactants one can select from [in] formulating detergents to deliver the desired cleaning results at a cost-effective level.”

Tinker agrees that newer, NPEfree detergents work well and don’t present quality issues, as long

as operators are dealing with a “medium-soil situation with not a lot of fatty greases or oils in [their] soil load.” Boosting the detergent with additives, however, can help combat those difficult soils.

Developing NPE-free formulas has been an important turning point, but consideration of health and the environment is certainly not a new practice.

“The environmental issues never go away,” Tinker says. “We just get a little bit deeper and deeper into the technology.”

For those polled, testing facilities play a role in development of chemicals that meet environmental, health and quality requirements. While many tests are done in-house, chemical suppliers say they have also partnered with outside facilities to analyze formulas and their effectiveness.

“We do use external testing labs for a variety of reasons—for example, when unique techniques are required or when external testing is very cost-efficient,” says Kovacs.“And we do a significant amount of testing in-house as well, using our state-of-the-art facilities in which we have invested significantly.”

Wash studies, chemical analysis, water analysis and microbiological identification are some examples Lang gives of testing activity at Ecolab.

EDUCATION AND TRAINING

Focusing again on the role of employees in wash-formula selection, the chemical suppliers that were polled stress the need for ongoing training and education.

“We try to give our customers kind of a very quick Laundry Chemistry 101-type class,” says Tinker, “[to] give them an idea of what their role is and how the other factors of the laundry work.”

For example, does the employee understand how water hardness can affect soil removal and linen quality?

Kovacs adds that training is especially important in environments where turnover is high, and that chemical providers should be willing and able to provide training materials or in-house training to washroom personnel.

“The key to any facility’s success is to ensure that the personnel is knowledgeable and capable of managing day-to-day operations effectively,” says Minissian.

While it’s important for washroom personnel to understand the nuances of wash-formula selection, it is also crucial for chemical suppliers to be familiar with a facility and its operations, according to Lang.

“Chemical suppliers need to have an overall knowledge of the total plant process,” he says. “That knowledge creates a situation

17

where the supplier can help deliver exceptional quality the first time and every time.”

And when it comes to laundry managers, are they well-versed in how formulas work?

“Laundry managers are as busy as ever,” says Kovacs. “And when they work with a reputable chemical provider, there is little need, other than personal interest possibly, to become well-versed in the details of the chemistry involved in the wash process.”

But he adds that managers should at least be familiar with some basic parameters in laundry chemistry.

Knowledge transfer is key to keeping managers informed now and in the future, according to Lang.

“Overall, I would say that laundry managers understand how formulas work, but I think we all have to recognize that there’s a risk moving forward,” he says.

Minissian agrees that ongoing training is crucial for managers trying to navigate the long list of variables that can affect wash formulas.

“Today’s laundry environment is ever-changing, with sophisticated and automated advanced technology requiring [a] higher skill set and knowledge,” he says. “This is an area that demands continued ALN education and training.”

UNDERPADS LAST 50% LONGER A growing number of polyurethane bonded underpads rag out too early increasing costs for the laundry. These pads are not designed to meet the demands of institutional laundries and are removed from circulation due to delamination or leaks caused in the extraction process.

Beck’s Classic Arid Touch underpads are the proven “Patient & Laundry Friendly Pad”. The face fabric provides fast wicking of moisture away from the patient for enhanced skincare benefits combine that with Vintex’s Uniply Lite bonding process which maximizes the life of the pad. This allows the underpad to be washed with both Chlorine and Peroxide based systems, unlike polyurethane pads.

GET BACK TO QUALITY AND RELIABILITY, ASK FOR THE BECK’S ARID TOUCH UNDERPAD

50 Emjay Blvd Brentwood, NY 11717 USA

ALN_Tab_half.indd 1

0514aln_p01,09,17,19.FINAL.indd 17

(p) 516-868-3200 (f ) 516-868-8282 pads@becksclassic.com

3/11/14 1:45 PM

4/23/14 7:22 AM

18 MAY 2014 | American Laundry News

www.AmericanLaundryNews.com

HCSC names Taylor Hospital’s Holobowicz Linen Coordinator of Year RIDLEY PARK, Pa. — Ann Holobowicz, linen supervisor here at Taylor Hospital, has been named “Linen Coordinator of the Year” by Hospital Central Services (HCSC), the facility’s linen supply partner. Holobowicz, a 35-year Taylor employee, was presented with a certificate of recognition, and HCSC made a financial contribution to the hospital in honor of her accomplishments.

Bill Moyer, vice president of Marketing and Service at HCSC, says the awards are designed to recognize professionals who “go above and beyond to help encourage and promote continuing linen cost management efforts” at the company’s member hospitals. Holobowicz was among a group of 125 potential recipients for the Holobowicz award.

In addition to her role as linen supervisor, Holobowicz oversees supply processing and distribution for Taylor Hospital, where nearly 500,000 pounds of clean laundry are delivered every year.

Working to reduce linen losses, ensuring organized and properly maintained stock levels and serving on the linen committee for Crozer-Keystone Health System (CKHS) are among the key duties she performs in her role, according to CKHS. She also cooperates with other hospitals in the system, sharing improvements she has implemented at Taylor, including a bulk locker program to manage the distribution of scrubs and to prevent losses.

“Ann’s commitment to excellence is apparent in every aspect of her work,” says Cindy Law, RN, BSN, MBA, clinical director of Perioperative Services at Taylor Hospital, and Holobowicz’s immediate supervisor. “She is a true steward of resources and is respected by her employees, her peers and leadership throughout the system.”

Holobowicz says she was “very honored and taken aback” by the award, according to CKHS. She credits teamwork as well as her own hard work for her department’s smooth operation.

Fowler Equipment Co. earns Maytag’s highest honor ST. JOSEPH, Mich. — Distributor Fowler Equipment Co. recently received the Fred Maytag Award during Maytag Commercial Laundry’s 56th annual meeting in Tucson, Ariz., Maytag reports.

This marks the fifth time Fowler Equipment has received the award, with its first award win dating back to 1959, accord-

ALN_Tab_1-4_H.indd 1

0514aln_p18.FINAL.indd 18

“No doubt, How2Media picked Streamline Solutions to be on the World’s Greatest!... TV show due to our top-notch product quality and personalized solutions approach, all to exceed each laundry stakeholder’s goals.”

Sanders adds that the company’s various products and programs “define the success of our company.”

How2Media sent a film crew to Orlando to meet with the Streamline team at the site of one of its recently completed projects. The objective was to learn the story behind the company’s “innovative, cost-saving applications.”

Dean and Doug Fowler (center) of Fowler Equipment Co. accept the Fred Maytag Award during Maytag Commercial Laundry’s 56th annual meeting in Tucson, Ariz. Joining them are (from left) Dick Ruel, John Maltese, Bob English and Randy Karn. (Photo: Maytag Commercial Laundry)

ing to Bob English, general manager at Maytag Commercial Laundry.

“Fowler Equipment Co. has exceeded all expectations as a result of unwavering perseverance, hard work and dedication.

Over the years, the company has developed a loyal customer base throughout the Northeast,” says English.

The award’s primary objective is to recognize a Maytag Commercial Laundry distributor for “outstanding achievements and remarkable performance,” the company says.

Recipients emulate founder Fred Maytag’s marketing philosophy to distribute the company’s products with “professionalism and integrity.”

“We are honored to receive the prestigious Fred Maytag Award for a fifth time,” says Doug Fowler, president at Fowler Equipment Co. “Our nearly six-decade partnership with Maytag Commercial Laundry is a solid foundation on which we continue to expand and grow. We embody everything this award stands for and are proud to uphold the longstanding tradition associated with it.”

World’s Greatest!... TV series features Streamline Solutions ORLANDO, Fla. — Laundry supply manufacturer Streamline Solutions was recently featured on ION Network’s TV series World’s Greatest!..., which provided interviews, visuals and behind-the-scenes footage of Streamline Solutions’ applications and processes, the company reports.

“Streamline Solutions has been working with healthcare and hospitality laundries for many years with our products such as soiled-linen bags, cart covers and liners, along with laundry wrap,” says Streamline Solutions CEO Ross Sanders.

Mission Linen Supply adds more alternative fuel vehicles to fleet SANTA BARBARA, Calif. — Mission Linen Supply recently increased the number of alternative fuel vehicles it uses, the company reports. Twenty-six compressed natural gas (CNG) vehicles and six propane vehicles have been added to the company’s fleet and are among its eco-conscious vehicles in use in California, Texas and Arizona.

The addition of the new vehicles has resulted in fuel cost savings and reduced emissions of nitrogen oxide, carbon monoxide and greenhouse gases, the company says.

The CNG vehicles are capable of reducing nitrogen oxide emissions by as much as 98% by burning cleaner fuel, and greenhouse gas emissions are reduced by about 30% or greater, according to the company.

The propane vehicles also burn cleaner fuel, resulting in reduced harmful emissions. The vehicles meet Environmental Protection Agency (EPA) and California Air Resources Board certification requirements.

Huebsch adds Empire Laundry Machinery to distributor network RIPON, Wis. — Huebsch recently added Rochester, N.Y.based Empire Laundry Machinery to its distribution network in New York state, the company reports.

The authorized distributor can now provide Huebsch commercial laundry equipment to on-premises laundries and Laundromats, according to Huebsch.

“By partnering with Huebsch, our customers now have the ability to benefit from the brand’s wide range of commercial equipment featuring easy-to-use controls,” says Gerry Hendershot, president and owner of Empire Laundry Machinery.

For on-premises laundries, Empire will offer Huebsch hardand soft-mount washer-extractors with eBoost™ technology, made in capacities of 18 to 65 pounds, and commercial tumble dryers, with capacities from 25 to 175 pounds.

ALN

2/11/14 2:14 PM

4/22/14 2:41 PM

American Laundry News | MAy 2014

www.AmericanLaundryNews.com

ALM

Continued from Page 1

laundry/linen industry.

• 7-9 p.m. — Welcome Reception Tuesday, June 10 • 8-9:15 a.m. — The day’s events open with New Business Opportunities in the LongTerm Care Market, presented by Amanda Lobb, RLLD, Calderon Textiles, and a session from Janice Larson, Encompass Group, on Understanding Linen’s Role in Value-Based Purchasing.

• 9:30-11:30 a.m. — Speaker Dave Davlin leads the morning’s general session with The Playmaker Mentality.

• 11:45 a.m.-1:45 p.m. — A “Lunch and Learn” event will pair cuisine from an award-winning chef with minieducational sessions, and will also include a presentation by one of ALM’s allied trades partner members.

2-3:15 p.m. — The afternoon’s edu• cational breakouts will feature The Lifetime Value of a Customer, presented

by Steve Kallenbach, American Dawn, and an industry update on Mergers and Acquisitions in Healthcare by Jeff Cohen, MedAssets.

• 3:30-4:45 p.m. — Paul Fayad, Positive Leader, will present Managing Staff in Times of Change in the afternoon’s second set of educational breakouts, and Glen Phillips, Phillips and Associates, will advise attendees on Developing New

Business in the Hospitality Industry.

• 6:30-9 p.m. — The “Cabana Crawl,” a new event, will feature a vendor hospitality area offering refreshments, entertainment and giveaways.

Wednesday, June 11 • 8-9:15 a.m. — The final morning’s educational breakouts include The Importance of Linen Usage Tracking Systems by Glen Phillips, Phillips and Associates, while Nancy Jenkins, American Reusable Textile Association (ARTA), will present a session on Proving the Value of Reusables.

• 9:30-11 a.m. — Off the Plate by Steve Kallenbach, American Dawn, and Business Plan Development for Savvy Professionals, David Bernstein, Turn-Key Engineering, are presentations slated for this time slot.

11:15 a.m.-12:30 p.m. — In the day’s • final breakouts, Doug Vieldhouse, Pertl & Alexander, presents Building a Foundation to Thrive, and Paul Fayad, Positive Leader, gives advice on Managing a Disengaged Workforce.

• 1:45-3:45 p.m. — The “Breezeway Chat” will focus on the perspectives of panelists Doug Story, David Bernstein and Glen Phillips.

• 6:30-9 p.m. — The ALM Awards and Reception Dinner concludes the event.

Online registration is available until June 5. To learn more about the conference, or to register, visit www.almnet. org/?page=ALMConference.

ALN

19

Calendar May 15 Association for Linen Management

Webinar: Green Conspiracy— Saving the Environment Without Breaking Your Budget Info: 800-669-0863

18-19 Textile Rental Services Association Third Annual Safety Summit Nashville, Tenn.

Info: 877-770-9274

20-22 Textile Rental Services Association Innovation Summit & Tours Spartanburg, S.C. Info: 877-770-9274

26

22 Textile Rental Services Association CEO/Executive Roundtable — F&B and Tours Greenville, S.C. Info: 877-770-9274

June 9-12 Association for Linen Management 2014 Educational Conference Tampa, Fla. Info: 800-669-0863

Wisconsin Fabricare Institute

Annual Convention, Auction and Trade Show Mequon, Wis. Info: 414-529-4707

July 17 Association for Linen Management Webinar: Proactive Customer Service Info: 800-669-0863

17-18 Textile Rental Services Association Sales and Marketing Summit Baltimore, Md. Info: 877-770-9274

ALN

Download Magazine Central and read American Laundry News on your iPad or Android Tablet Step 1: Go to your App Store Step 4: Type AmericanLaundry and type Magazine Central into search bar

News into the search bar

Step 5: Click Download Step 2: Click the

box to install the app (you won’t have to do this again)

Step 6: Click View

Step 3: Open the Magazine Central App

Step 7: Read & enjoy!

The app stays on your tablet.

Check back monthly to download the latest issue.

0414aln_Mag Central tab half.indd 1

0514aln_p01,09,17,19.FINAL.indd 19

3/12/14 4:59 PM

4/22/14 8:16 PM

20 MAY 2014 | AMERICAN LAUNDRY NEWS

www.AmericanLaundryNews.com

Classified Advertising CONSULTING SERVICES

EQUIPMENT FOR SALE

Laundry-Consulting.Com Professional laundry consulting support.

New and upgraded plant designs.

Process evaluation and improvement.

HLAC prep.

Used equipment locator services.

Contact David Chadsey, 321-287-4448, dc@laundry-consulting.com.

DISTRIBUTOR OFFERINGS www.ineedjpequipment.com 800/925-3236 “Expect Excellence”

Expect excellence from the leader in used industrial laundry equipment sales and installation.

Keep up to date with equipment for sale, and the latest industry news by subscribing to our monthly newsletter. Go to www.ineedjpequipment and sign up TODAY! About JP Equipment JP Equipment is a trusted, full-service, used industrial laundry equipment sales and installation company.

We pride ourselves on providing unparalleled service, whether you are building a new laundry, or upgrading your current facility.

EQUIPMENT FOR SALE: CBW System CBW Mentor Control CBW Inverter Cabinet CBW Load Conveyor, 1996 10 mod CBW, 1996 Flow lifter and Splitter Tanks Single Stage Press, 2012 Incline Conveyor Milnor Shuttle, 1996 Milnor Tunnel Dryers, 1996 Milnor Tunnel Dryer, 2012 Milnor Belbox Dryer Control Cabinet Post Dry Conveyor, 1996 Tunnel Dryers Lint Collector, 1996 Conventional Dryers (2) Milnor 122D Dryers, 2005 (2) ADC Dryers, 1995 Challenge Dryer, 1980 Conventional Washers (2) 135lb Milnor Washers, 1996 700lb Washex Washer, 1990 (2) 400lb Braun TSL Washer, 1984

Stanco Industries, Inc. Serving The Textile Trades Since 1970

800-932-3769

Ask for Mike @ ext 203

1 1 1 1 1 3 5 3 1 1

-------------- Equipment For Sale -------------2005 Braun Omega 2-Lane. L/Discharge 2005 Braun Omega 2-Lane. R/Discharge 2005 Chicago 36” 1-Roll Thermal Heated 2001 Chicago King Edge Spreader-Feeder 2001 Chicago Edge Blanket S/F 2003 Milnor 135# w/e EP Plus 2003 Huebsch 120# Gas Dryers 2007 Huebsch 120# Gas Dryers 2009 Sellers 80hp Boiler,150psi Never Installed 2005 Ludell 3M Direct Contact Water Htr

FOR NEW OR USED LAUNDRY EQUIPMENT, DM IS YOUR SOURCE FOR ALL YOUR NEEDS QTY 1

Braun 600lb Top Side Loaders 2000

DESC R IPTION

1

Braun 400lb Steam Dryer Model 123

1

Jensen 2 Roll 36” Steam Ironer 1996

2

Milnor 120lb Steam Dryers 2006

2

Milnor 36026V5J 100lb Washers 2004

2

Milnor M122 Gas Dryers

1

Chicago PikQuik

1

Chicago S-10 Skyline Folder 2000

1

Shaper Steam 12” Ironer by 120”

PARTS FOR SALE PARTS, PARTS, PARTS Huge stock of parts for most laundry equipment & boilers.

Also traps, valves and lubricants.

Overnight delivery.

Steiner-Atlantic, 800-333-8883 Fax: 305-751-8390 parts@steineratlantic.com www.steineratlantic.com

POSITIONS AVAILABLE

Get the info you need online...

A DVA NC E Y O UR CAREER Call Craig Lloyd toll free at (877) CWL-LOYD between 9 a.m. – 9 p.m. EST. Please visit www.laundrycareers.com to review current industrial/institutional laundry management openings.

www.AmericanLaundryNews.com

We Buy Used Equipment • Pictures on website

For Pricing call Ron Hirsch 516.938.4300 • 516.315.7426 Hicksville, NY

The Griffin Group, Inc.® “Recruitment Specialist”

www.directmachinery.com

Need to FILL a position?

AMKO AMERICA, INC.

Call Deana Griffin 888-235-2365 www.thegriffingroup.cc deana@thegriffingroup.cc

Remanufactured Finishing Equipment

Delta Ironers, Omega Folders & Towel Folders (1 year parts warranty) Like new at half the cost.

PARTS, IRONER SUPPLIES & NEW EQUIPMENT ALSO AVAILABLE Contact: (561) 863-9696 jurgenb@bellsouth.net

MISSED OUR DEADLINE?

PLACE YOUR AD ONLINE: www.AmericanLaundryNews.com

--------- DON’T BE LEFT WITHOUT POWER -------Emergency Generators Available 50KW to 1000KW Natural Gas & Diesel Stanco Industries, Inc. 800-932-3769 Ask for Mike @ ext 203 www.StanCoInd.com

KEEPING IT GREEN SINCE 1970

(1) MILNOR 2006 48040F7B 275# 2 WAY TILT OPEN POCKET SOFT MOUNT WASHER (2) B & C 2011 SP100 100# SOFT MOUNT WASHERS WITH BLUOX OZONE (1) UNIMAC 1998 UW100PV 100# WASHER 480V (1) CHICAGO 2002 IMPERIAL 232 STEAM IRONER (1) CHICAGO 2006 TRISTAR 32PCS GAS IRONER/FOLDER/STACKER (1) CHICAGO 2002 SKYLINE S-10 FOLDER (1) CHICAGO 2007 SKYLINE S-14 FOLDER/STACKER (1) CHICAGO 2004 SKYLINE BLANKET FOLDER/STACKER (1) CHICAGO 2001 EDGE SPREADER/FEEDER (1) CHICAGO 2006 AIR CHICAGO SMALL PIECE FOLDER (1) CHICAGO 1997 AIR CHICAGO XL SMALL PIECE FOLDER (1) JENSEN 1995 JET SMALL PIECE FOLDER (1) COLMAC 1997 CFS-1200SRH STEAM TUNNEL (1) HUEBSCH 2006 UD20X126 FRONT RETURN GAS IRONER (1) UNIPRESS 1998 SBT SINGLE BUCK SHIRT PRESS (1) UNIPRESS 2003 CRD ROTARY DOUBLE BUCK SHIRT PRESS

View photos of entire inventory at www.washburnmachinery.com

800-245-8425

0514aln_class.FINAL.indd 20

4/22/14 3:53 PM

AMERICAN LAUNDRY NEWS | MAY 2014

www.AmericanLaundryNews.com

Source Directory

A convenient guide to sources of products and services

Chm #9572 Rev. Turnabout 3" ALN Class.

APPAREL FINISHING

21

CARTS, TRUCKS & BASKETS

3/28/14

11:23

CARTS, TRUCKS & BASKETS

When You Care About Tare...Weights

The Cart Guys

TURNABOUT TRUCK 72S

CARTS, TRUCKS & BASKETS

72P Latest carts—brilliantly engineered for lighter tare weights—so consistent you can skip the weigh-in, ensure accurate billing.

Staffers welcome the easy rolling, too!

Meese Orbitron Dunne Co.

Call 800.829.4535 • MODLaundry.com • FREE QUOTE

• •

Simply reposition the poly shelves to convert from a clean linen delivery to a soiled linen bulk transport truck M8594's shelf design reduces overall height by 20% for more ergonomic top loading

Model M8594

l-800-275-2436 R e p s A v a i l a b l e 8 A M - 8 P M (EST)

maxi-movers.com Fax: • Email:sales@maxi-movers.com 631-661-8209

tm

#1 Manufucturing Source for Laundry Transportation!

Heavy Duty Rhino Wrapping Machine • Rhino Console Wrapper for finished laundry.

• Stainless steel construction.

• Solid state controlled electric cut-off rod.

In-stock for immediate delivery.

(800) 634-0555

RBWire.com FREE Roll of Laundry Wrap with Rhino Wrapper Purchase www.nortonsupply.com • 800.869.7664 • sales@nortonsupply.com

M.I.T. POLY-CART 211 CENTRAL PARK WEST, NEW YORK, NY 10024 800-234-7659, FAX: 212-721-9022 WWW.MITPOLYCART.COM Sani Trux - McClure Industries, Inc. 9051 SE 55th Ave., Portland, OR 97206 800-752-2821 www.mcclureindustries.com, info@mcclureindustries.com

AmericanLaundryNews.com More than

5,250

unique visitors monthly!

Source Directory listings in American Laundry News are sold on an annual basis at the following rates:

0514aln_class.FINAL.indd 21

2014 Listings Regular Boldface All Caps Four Line Listing per Year $820 $1,030 $1,030 Display and additional line rates available upon request

All Caps, Boldface $1,090

All Major Credit Cards Accepted

4/22/14 8:04 PM

22 MAY 2014 | AMERICAN LAUNDRY NEWS

www.AmericanLaundryNews.com

Source Directory CART-WASHING SYSTEMS Energenics Corp., Kartwasher 1470 Don St., Naples, FL 34104 800-944-1711 www.energenics.com Sani Wash - McClure Industries, Inc. 9051 SE 55th Ave., Portland, OR 97206 800-752-2821 www.mcclureindustries.com, info@mcclureindustries.com

A convenient guide to sources of products and services

FLATWORK IRONERS

PARTS

(480) 205-1293 (602) 763-7416 www.azsle.com

DRYERS – 100 POUNDS OR MORE Pellerin Milnor Corp.

P.O. Box 400, Kenner, LA 70063 504-467-9591, Fax: 504-468-3094 www.milnor.com

Whether your ironer needs pads and covers, wax cloths or cleaning supplies, or needs to be completely rebuilt, there is no job too big or too small for

Southwest Laundry Equipment

DRYERS – 100 POUNDS OR LESS Pellerin Milnor Corp.

P.O. Box 400, Kenner, LA 70063 504-467-9591, Fax: 504-468-3094 www.milnor.com

LINT COLLECTORS & FILTERS

Setting the Standard in Lint Filters for 25 Years • Hotel • OPL • Coin Op • Dry Cleaners • Industrial • Commercial • Cruise Industry

FINANCIAL SERVICES

COMMERCIAL & INDUSTRIAL EQUIPMENT FINANCING • Financing of all OPL, industrial and related equipment • Competitive rates • Flexible terms • No prepayment penalty

www.firestonefinancial.com 1-800-851-1001 ext. 209 | laundry@firestonefinancial.com

FLATWORK IRONERS

Dry or Wet Style Filters to Work with “ALL” Dryer Sizes or Multiple Situations, Fiberglass or Stainless and Custom for Unique Situations!

All manufacturing done on premise

800-826-1245

www.cleancyclesystems.com • ccsystems@tqind.com

★ Our In-Line Lint Filter mounts inside, saves space! ★ Fiberglass Wet Filters - 6,000 to 40,000 cfm ★ Fiberglass or Stainless Steel Dry Filters

ENERGENICS CORPORATION Talk with our Design and Engineering Staff about your needs. Hundreds Sold Annually.

800-944-1711 www.energenics.com MATERIAL HANDLING / CONVEYORS Gardner Machinery Corporation P. O. Box 33818, Charlotte, NC 28233 Ph.: (704)372-3890; Fax: (704)342-0758 www.gardnermachinery.com

Knowhow In Action

Your Tingue rep is a fully trained master of finishing equipment operation, maintenance and installation. Call for: To website • Pads, covers, belts, waxes, tapes and more • Carts, trucks, baskets and bags • Parts, rebuilds and repairs 800.829.3864 www.Tingue.com TBR-Associates.com

TalleyMachinery.com

Source Directory listings in American Laundry News are sold on an annual basis at the following rates:

0514aln_class.FINAL.indd 22

MODLaundry.com

2014 Listings Regular Boldface All Caps Four Line Listing per Year $820 $1,030 $1,030 Display and additional line rates available upon request

All Caps, Boldface $1,090

All Major Credit Cards Accepted

4/22/14 3:53 PM

AMERICAN LAUNDRY NEWS | MAY 2014

www.AmericanLaundryNews.com

Source Directory PLANT DESIGN & INSTALLATION

RAGS WANTED FOR CASH OR TRADE

23

A convenient guide to sources of products and services

WASHERS – CONTINUOUS BATCH Pellerin Milnor Corp.

P.O. Box 400, Kenner, LA 70063 504-467-9591, Fax: 504-468-3094 www.milnor.com

A & B WIPER SUPPLY

WASHER-EXTRACTOR – 100 POUNDS OR LESS Pellerin Milnor Corp.

P.O. Box 400, Kenner, LA 70063 504-467-9591, Fax: 504-468-3094 www.milnor.com

WASHER-EXTRACTOR – 100 POUNDS OR MORE You’re probably not getting enough for your linen discards!

We pay TOP DOLLAR for your discarded sheets, towels, thermal & flannel blankets.

Call us for an immediate quote:

Pellerin Milnor Corp.

P.O. Box 400, Kenner, LA 70063 504-467-9591, Fax: 504-468-3094 www.milnor.com

800-333-RAGS (7247)

PRESSES – EXTRACTION Pellerin Milnor Corp.

P.O. Box 400, Kenner, LA 70063 504-467-9591, Fax: 504-468-3094 www.milnor.com

www.

We’re Hiring!

.com

Textile Buying & Sales Executive Positions Available E-mail Résumés to resumes@bestrags.com

THE

WIRE

The latest news, straight to your inbox, 2X a week INDEX OF ADVERTISERS Company

Web Site

Page

Company

Page

www.lavatec-laundry.com

24

www.lgcommerciallaundry.com

3

www.mcclureindustries.com

16

Parker Boiler

www.parkerboiler.com

16

18

Royal Basket Trucks

www.royal-basket.com

14

www.ipso.com

11

Stanco Industries

www.stancoind.com

20

www.ineedjpequipment.com

20

The Griffin Group, Inc.

www.thegriffingroup.cc

20

Kannegiesser USA

www.kannegiesser.com

9

www.unimac.com

7

LaundryCareers.com

www.laundrycareers.com

20

www.washburnmachinery.com

20

A.L. Wilson Chemical Co.

Lavatec Laundry Technology

Web Site

www.alwilson.com

13

American Dawn

www.americandawn.com

5

Beck’s Classic

www.becksclassic.com

17

McClure Industries

Direct Machinery Sales Corp.

www.directmachinery.com

20

EDRO Corp.

www.edrodynawash.com

IPSO J.P. Equipment

Source Directory listings in American Laundry News are sold on an annual basis at the following rates:

0514aln_class.FINAL.indd 23

LG

UniMac Washburn Machinery

2014 Listings Regular Boldface All Caps Four Line Listing per Year $820 $1,030 $1,030 Display and additional line rates available upon request

All Caps, Boldface $1,090

All Major Credit Cards Accepted

4/22/14 8:04 PM

ALN_Full_Page.indd 1

2/10/14 10:53 AM