1 minute read

HPS LAYOUT HPS LAYOUT

Next Article
LIGHTING

LIGHTING

1000w DE fixtures need to have sufficient space between the fixtures widthwise, so that the light overlap does not create hot spots. In places where the light overlaps it multiplies the intensity, so the center of the rooms will always have a higher intensity then the edges of the rooms (FIG. 2) . In rooms with a lower light count (less than 30) 1.22 m x 1.5 m works well (FIG. 1) due to throwing light in a bow tie shape (FIG. 3) . In rooms with a higher light count that spacing can be too intense so increasing the footprint to 1.22 m x 1.83 m works better.

1000w DE fixtures need to have sufficient space between the fixtures widthwise, so that the light overlap does not create hot spots. In places where the light overlaps it multiplies the intensity, so the center of the rooms will always have a higher intensity than the edges of the rooms (FIG. 2) . In rooms with a lower light count (less than 30) 1.22 m x 1.5 m works well (FIG. 1) due to throwing light in a bow tie shape (FIG. 3) . In rooms with a higher light count that spacing can be too intense so increasing the footprint to 1.22 m x 1.83 m works better.

Hps Room

1000w DE

11 m x 5.5 m

11 m x 5.5 m

This article is from: