Evolve® 200 & 250 | Castor Kit Fitting Guide (Rev C | BP40003A)

Accessory Kit AACTK 200mm and 250mm Chromatography Columns

DELTA PRECISION LTD

Chromatography Column

Accessory Kit AACTK 200mm and 250mm Columns

Revision History Revision A B C

Comments

Date 01/12/14 21/06/18 12/07/2021

Initial release Updated address Updated to reflect Evolve® Trademark status

Evolve® is a registered trademark of Delta Precision Ltd. Evolve® is a registered trademark in the EU, UK and US.

Manual Revision

Date

C

July 2021

2

Accessory Kit AACTK Fitting Instructions Kit Contents CASTOR KIT 200, 250

DESCRIPTION Spanner 22/24mm Caster Assembly, Braked Fitting Instructions

QTY 1 3 1

PRODUCT NUMBER AACTK

Installing Height Adjustable Casters Height adjustable castors can be fitted to the larger Evolve® column. For hygiene the adjustability mechanism is covered by a sliding sleeve.

To do this, the following procedure is recommended.

1. Remove the adjuster assembly from the column tube by removing the flange fixing bolts. Place the adjuster on a clean area.

2. Place the column on its side.

CAUTION! Column units are heavy.

3. Slide the sleeve upwards away from the foot unit.

4. Using the correct spanner undo the foot assembly from the support leg.

5. Fit the caster assembly to the column.

6. Ensure that each caster is set to the same height and the locking nut is in contact with the support leg and the height adjust nut is in contact with the caster unit.

Please refer to Figure 1

Support Leg Locking Nut

Locking Nut

Sleeve

Height Adjust Nut

Height Adjust Nut

Wheel Lock Wheel

Figure 1 Height Adjustable Casters

3

Contact Us To view our Evolve® Column User guides please visit: www.astreabioseparations.com/resources/evolve -column-user-guides For further enquires please contact: sales@astrea-bio.com

4